Home | << 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 >> |
Records | |||||
---|---|---|---|---|---|
Author | Fedotov, S.S.; Kuzovchikov, S.M.; Khasanova, N.R.; Drozhzhin, O.A.; Filimonov, D.S.; Karakulina, O.M.; Hadermann, J.; Abakumov, A.M.; Antipov, E.V. | ||||
Title | Synthesis, structure and electrochemical properties of LiNaCo0.5Fe0.5PO4F fluoride-phosphate | Type | A1 Journal article | ||
Year | 2016 | Publication | Journal of solid state chemistry | Abbreviated Journal | J Solid State Chem |
Volume | 242 | Issue | 242 | Pages | 70-77 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | LiNaCo 0.5 Fe 0.5 PO 4 F fluoride-phosphate was synthesized via conventional solid-state and novel freeze-drying routes. The crystal structure was refined based on neutron powder diffraction (NPD) data and validated by electron diffraction (ED) and high-resolution transmission electron microscopy (HRTEM). The alkali ions are ordered in LiNaCo 0.5 Fe 0.5 PO 4 F and the transition metals jointly occupy the same crystallographic sites. The oxidation state and oxygen coordination environment of the Fe atoms were verified by 57 Fe Mössbauer spectroscopy. Electrochemical tests of the LiNaCo 0.5 Fe 0.5 PO 4 F cathode material demonstrated a reversible activity of the Fe 3+ /Fe 2+ redox couple at the electrode potential near 3.4 V and minor activity of the Co 3+ /Co 2+ redox couple over 5 V vs Li/Li + . The material exhibits a good capacity retention in the 2.4÷4.6 V vs Li/Li + potential range with the delivered discharge capacity of more than 82% (theo.) regarding Fe 3+ /Fe 2+ . | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000383304900010 | Publication Date | 2016-02-27 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0022-4596 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 2.299 | Times cited | 1 | Open Access | |
Notes | The authors kindly thank Dr. O. A. Shlyakhtin for the assistance in the freeze-drying synthesis. We are grateful to the Laboratory for Neutron Scattering and Imaging (NLS) at the Paul Scherrer Institut (Villigen, Switzerland) for granting beam time at the HRPT diffractometer and to Dr. D. V. Sheptyakov for the technical support during the experiment. The work was partly supported by Russian Foundation for Basic Research (RFBR grant 13-03-00495a, 14-29-04064 ofim, 16-33-01131 mola), Skoltech Center for Electrochemical Energy Storage and Moscow State University Development Program up to 2020. J. Hadermann, O.M. Karakulina and A.M. Abakumov acknowledge support from FWO under grant G040116N. | Approved | Most recent IF: 2.299 | ||
Call Number | c:irua:133776 | Serial | 4075 | ||
Permanent link to this record | |||||
Author | Serrano-Montes, A.B.; Langer, J.; Henriksen-Lacey, M.; Jimenez de Aberasturi, D.; Solís, D.M.; Taboada, J.M.; Obelleiro, F.; Sentosun, K.; Bals, S.; Bekdemir, A.; Stellacci, F.; Liz-Marzán, L.M. | ||||
Title | Gold Nanostar-Coated Polystyrene Beads as Multifunctional Nanoprobes for SERS Bioimaging | Type | A1 Journal article | ||
Year | 2016 | Publication | The journal of physical chemistry: C : nanomaterials and interfaces | Abbreviated Journal | J Phys Chem C |
Volume | 120 | Issue | 120 | Pages | 20860-20868 |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | Hybrid colloidal nanocomposites comprising polystyrene beads and plasmonic gold nanostars are reported as multifunctional optical nanoprobes. Such self-assembled structures are excellent Raman enhancers for bio-applications as they feature plasmon modes in the near infrared “first biological transparency window”. In this proof of concept study, we used 4- mercaptobenzoic acid as a Raman-active molecule to optimize the density of gold nanostars on polystyrene beads, improving SERS performance and thereby allowing in vitro cell culture imaging. Interestingly, intermediate gold nanostar loadings were found to yield higher SERS response, which was confirmed by electromagnetic modeling. These engineered hybrid nanostructures notably improve the possibilities of using gold nanostars as SERS tags. Additionally, when fluorescently labeled polystyrene bead are used as colloidal carriers, the composite particles can be applied as promising tools for multimodal bioimaging. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000384034600045 | Publication Date | 2016-05-22 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1932-7447 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 4.536 | Times cited | 64 | Open Access | OpenAccess |
Notes | Funding is acknowledged from the European Commission (Grant #310445-2 SAVVY), the European Research Council (ERC Advanced Grant #267867 Plasmaquo, and ERC Starting Grant #335078 Colouratom) and the Spanish MINECO (Project MAT2013-46101-R). We thank IKERLAT Polymers for the non-fluorescent PS beads and Prof. Juan Mareque, Prof. Soledad Penades and Dr. Sergio Moya (CIC biomagune) for borrowing various cell lines. D.M.S., J.M.T, and F.O. acknowledge funding from the European Regional Development Fund (ERDF) and the Spanish MINECO (Projects MAT2014-58201-C2-1-R, MAT2014- 58201-C2-2-R), from the ERDF and the Galician Regional Government under agreement for funding the Atlantic Research Center for Information and Communication Technologies (AtlantTIC), and from the ERDF and the Extremadura Regional Government (Junta de Extremadura) under Project IB13185. (ROMEO:white; preprint:; postprint:restricted 12 months embargo; pdfversion:cannot); ; ECAS_Sara; | Approved | Most recent IF: 4.536 | ||
Call Number | c:irua:133952 | Serial | 4082 | ||
Permanent link to this record | |||||
Author | Lottini, E.; López-Ortega, A.; Bertoni, G.; Turner, S.; Meledina, M.; Van Tendeloo, G.; de Julián Fernández, C.; Sangregorio, C. | ||||
Title | Strongly Exchange Coupled Core|Shell Nanoparticles with High Magnetic Anisotropy: A Strategy toward Rare-Earth-Free Permanent Magnets | Type | A1 Journal article | ||
Year | 2016 | Publication | Chemistry of materials | Abbreviated Journal | Chem Mater |
Volume | 28 | Issue | 28 | Pages | 4214-4222 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | Antiferromagnetic(AFM)|ferrimagnetic(FiM) core|shell (CS) nanoparticles (NPs) of formula Co0.3Fe0.7O|Co0.6Fe2.4O4 with mean diameter from 6 to 18 nm have been synthesized through a one-pot thermal decomposition process. The CS structure has been generated by topotaxial oxidation of the core region, leading to the formation of a highly monodisperse single inverted AFM|FiM CS system with variable AFM-core diameter and constant FiM-shell thickness (~2 nm). The sharp interface, the high structural matching between both phases and the good crystallinity of the AFM material have been structurally demonstrated and are corroborated by the robust exchange-coupling between AFM and FiM phases, which gives rise to one among the largest exchange bias (HE) values ever reported for CS NPs (8.6 kOe) and to a strongly enhanced coercive field (HC). In addition, the investigation of the magnetic properties as a function of the AFM-core size (dAFM), revealed a non-monotonous trend of both HC and HE, which display a maximum value for dAFM = 5 nm (19.3 and 8.6 kOe, respectively). These properties induce a huge improvement of the capability of storing energy of the material, a result which suggests that the combination of highly anisotropic AFM|FiM materials can be an efficient strategy towards the realization of novel Rare Earth-free permanent magnets. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000378973100013 | Publication Date | 2016-05-20 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0897-4756 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 9.466 | Times cited | 48 | Open Access | |
Notes | This work was supported by the EU-FP7 through NANOPYME Project (No. 310516) and Integrated Infrastructure Initiative ESTEEM2 (No. 312483). S.T. gratefully acknowledges the FWO Flanders for a post-doctoral scholarship.; esteem2_ta | Approved | Most recent IF: 9.466 | ||
Call Number | c:irua:134084 c:irua:134084 | Serial | 4092 | ||
Permanent link to this record | |||||
Author | Nikolaev, A.V.; Lamoen, D.; Partoens, B. | ||||
Title | Extension of the basis set of linearized augmented plane wave (LAPW) method by using supplemented tight binding basis functions | Type | A1 Journal article | ||
Year | 2016 | Publication | The journal of chemical physics | Abbreviated Journal | J Chem Phys |
Volume | 145 | Issue | 145 | Pages | 014101 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT); Condensed Matter Theory (CMT) | ||||
Abstract | In order to increase the accuracy of the linearized augmented plane wave (LAPW) method, we present a new approach where the plane wave basis function is augmented by two different atomic radial components constructed at two different linearization energies corresponding to two different electron bands (or energy windows). We demonstrate that this case can be reduced to the standard treatment within the LAPW paradigm where the usual basis set is enriched by the basis functions of the tight binding type, which go to zero with zero derivative at the sphere boundary. We show that the task is closely related with the problem of extended core states which is currently solved by applying the LAPW method with local orbitals (LAPW+LO). In comparison with LAPW+LO, the number of supplemented basis functions in our approach is doubled, which opens up a new channel for the extension of the LAPW and LAPW+LO basis sets. The appearance of new supplemented basis functions absent in the LAPW+LO treatment is closely related with the existence of the ul-component in the canonical LAPW method. We discuss properties of additional tight binding basis functions and apply the extended basis set for computation of electron energy bands of lanthanum (face and body centered structures) and hexagonal close packed lattice of cadmium. We demonstrate that the new treatment gives lower total energies in comparison with both canonical LAPW and LAPW+LO, with the energy difference more pronounced for intermediate and poor LAPW basis sets. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000379584700003 | Publication Date | 2016-07-05 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0021-9606 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 2.965 | Times cited | 11 | Open Access | |
Notes | A.V.N. acknowledges useful discussions with B. Verberck, E. V. Tkalya, and A. V. Bibikov. | Approved | Most recent IF: 2.965 | ||
Call Number | c:irua:134290 | Serial | 4099 | ||
Permanent link to this record | |||||
Author | Bal, K.M.; Neyts, E.C. | ||||
Title | Direct observation of realistic-temperature fuel combustion mechanisms in atomistic simulations | Type | A1 Journal article | ||
Year | 2016 | Publication | Chemical science | Abbreviated Journal | Chem Sci |
Volume | 7 | Issue | 7 | Pages | 5280-5286 |
Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
Abstract | Atomistic simulations can in principle provide an unbiased description of all mechanisms, intermediates, and products of complex chemical processes. However, due to the severe time scale limitation of conventional simulation techniques, unrealistically high simulation temperatures are usually applied, which are a poor approximation of most practically relevant low-temperature applications. In this work, we demonstrate the direct observation at the atomic scale of the pyrolysis and oxidation of n-dodecane at temperatures as low as 700 K through the use of a novel simulation technique, collective variable-driven hyperdynamics (CVHD). A simulated timescale of up to 39 seconds is reached. Product compositions and dominant mechanisms are found to be strongly temperature-dependent, and are consistent with experiments and kinetic models. These simulations provide a first atomic-level look at the full dynamics of the complicated fuel combustion process at industrially relevant temperatures and time scales, unattainable by conventional molecular dynamics simulations. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000380893900059 | Publication Date | 2016-05-05 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 2041-6520 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 8.668 | Times cited | 22 | Open Access | |
Notes | K. M. B. is funded as PhD fellow (aspirant) of the FWO-Flanders (Fund for Scientic Research-Flanders), Grant 11V8915N. The computational resources and services used in this work were provided by the VSC (Flemish Supercomputer Center) and the HPC infrastructure of the University of Antwerp (CalcUA), funded by the Hercules Foundation and the Flemish Government – department EWI. The authors would also like to thank S. Banerjee for assisting with the interpretation of the experimental results. | Approved | Most recent IF: 8.668 | ||
Call Number | c:irua:134577 c:irua:135670 | Serial | 4105 | ||
Permanent link to this record | |||||
Author | Ying, J.; Hu, Z.-Y.; Yang, X.-Y.; Wei, H.; Xiao, Y.-X.; Janiak, C.; Mu, S.-C.; Tian, G.; Pan, M.; Van Tendeloo, G.; Su, B.-L. | ||||
Title | High viscosity to highly dispersed PtPd bimetallic nanocrystals for enhanced catalytic activity and stability | Type | A1 Journal article | ||
Year | 2016 | Publication | Chemical communications | Abbreviated Journal | Chem Commun |
Volume | 52 | Issue | 52 | Pages | 8219-8222 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | A facile high-viscosity-solvent method is presented to synthesize PtPd bimetallic nanocrystals highly dispersed in different mesostructures (2D and 3D structures), porosities (large and small pore sizes), and compositions (silica and carbon). Further, highly catalytic activity, stability and durability of the nanometals have been proven in different catalytic reactions. | ||||
Address | State Key Laboratory Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, 122, Luoshi Road, Wuhan, 430070, China. xyyang@whut.edu.cn | ||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | English | Wos | 000378715400006 | Publication Date | 2016-05-16 |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1359-7345 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 6.319 | Times cited | 19 | Open Access | |
Notes | This work was supported by NFSC (51472190 and 51503166), ISTCP (2015DFE52870), PCSIRT (IRT15R52) of China, and the Integrated Infrastructure Initiative of EU (312483-ESTEEM2).; esteem2jra4 | Approved | Most recent IF: 6.319 | ||
Call Number | c:irua:134660 c:irua:134660 | Serial | 4110 | ||
Permanent link to this record | |||||
Author | Bercx, M.; Sarmadian, N.; Saniz, R.; Partoens, B.; Lamoen, D. | ||||
Title | First-principles analysis of the spectroscopic limited maximum efficiency of photovoltaic absorber layers for CuAu-like chalcogenides and silicon | Type | A1 Journal article | ||
Year | 2016 | Publication | Physical chemistry, chemical physics | Abbreviated Journal | Phys Chem Chem Phys |
Volume | 18 | Issue | 18 | Pages | 20542-20549 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT); Condensed Matter Theory (CMT) | ||||
Abstract | Chalcopyrite semiconductors are of considerable interest for application as absorber layers in thin-film photovoltaic cells. When growing films of these compounds, however, they are often found to contain CuAu-like domains, a metastable phase of chalcopyrite. It has been reported that for CuInS2, the presence of the CuAu-like phase improves the short circuit current of the chalcopyrite-based photovoltaic cell. We investigate the thermodynamic stability of both phases for a selected list of I-III-VI2 materials using a first-principles density functional theory approach. For the CuIn-VI2 compounds, the difference in formation energy between the chalcopyrite and CuAu-like phase is found to be close to 2 meV per atom, indicating a high likelihood of the presence of CuAu-like domains. Next, we calculate the spectroscopic limited maximum efficiency (SLME) of the CuAu-like phase and compare the results with those of the corresponding chalcopyrite phase. We identify several candidates with a high efficiency, such as CuAu-like CuInS2, for which we obtain an SLME of 29% at a thickness of 500 nm. We observe that the SLME can have values above the Shockley-Queisser (SQ) limit, and show that this can occur because the SQ limit assumes the absorptivity to be a step function, thus overestimating the radiative recombination in the detailed balance approach. This means that it is possible to find higher theoretical efficiencies within this framework simply by calculating the J-V characteristic with an absorption spectrum. Finally, we expand our SLME analysis to indirect band gap absorbers by studying silicon, and find that the SLME quickly overestimates the reverse saturation current of indirect band gap materials, drastically lowering their calculated efficiency. | ||||
Address | EMAT & CMT groups, Department of Physics, University of Antwerp, Campus Groenenborger, Groenenborgerlaan 171, 2020 Antwerp, Belgium. marnik.bercx@uantwerpen.be | ||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | English | Wos | 000381428600058 | Publication Date | 2016-07-08 |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1463-9076 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 4.123 | Times cited | 34 | Open Access | |
Notes | We acknowledge financial support of FWO-Vlaanderen through projects G.0150.13N and G.0216.14N and ERA-NET RUS Plus/FWO, Grant G0D6515N. The computational resources and services used in this work were provided by the VSC (Flemish Supercomputer Center) and the HPC infrastructure of the University of Antwerp (CalcUA), both funded by the FWO FWOVlaanderen. | Approved | Most recent IF: 4.123 | ||
Call Number | c:irua:135091 | Serial | 4112 | ||
Permanent link to this record | |||||
Author | Hill, E.H.; Claes, N.; Bals, S.; Liz-Marzán, L.M. | ||||
Title | Layered Silicate Clays as Templates for Anisotropic Gold Nanoparticle Growth | Type | A1 Journal article | ||
Year | 2016 | Publication | Chemistry of materials | Abbreviated Journal | Chem Mater |
Volume | 28 | Issue | 28 | Pages | 5131-5139 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | Clay minerals are abundant natural materials arising in the presence of water and are composed of small particles of different sizes and shapes. The interlamellar space between layered silicate clays can also be used to host a variety of different organic and inorganic guest molecules or particles. Recent studies of clay−metal hybrids formed by impregnation of nanoparticles into the interlayer spaces of the clays have not demonstrated the ability for templated growth following the shape of the particles. Following this line of interest, a method for the synthesis of gold nanoparticles on the synthetic layered silicate clay laponite was developed. This approach can be used to make metal−clay nanoparticles with a variety of morphologies while retaining the molecular adsorption properties of the clay. The surface enhanced Raman scattering enhancement of these particles was also found to be greater than that obtained from other metal nanoparticles of a similar morphology, likely due to increased dye adsorption by the presence of the clay. The hybrid particles presented herein will contribute to further study of plasmonic sensing, catalysis, dye aggregation, and novel composite materials. |
||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000380576700031 | Publication Date | 2016-07-02 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0897-4756 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 9.466 | Times cited | 13 | Open Access | OpenAccess |
Notes | This work has been supported by the European Research Council (ERC Advanced Grant No. 267867, PLASMAQUO). E.H.H. thanks the Spanish Ministry of Economy and Competitiveness for providing a Juan de la Cierva Fellowship (FJCI-2014-22598). N.C. and S.B. acknowledge financial support from European Research Council (ERC Starting Grant #335078-COLOURATOM). We gratefully acknowledge A. B. Serrano-Montes for providing the seed-mediated Au nanostars.; ECAS_Sara; (ROMEO:white; preprint:; postprint:restricted 12 months embargo; pdfversion:cannot); | Approved | Most recent IF: 9.466 | ||
Call Number | c:irua:135178 c:irua:135178 | Serial | 4117 | ||
Permanent link to this record | |||||
Author | Aierken, Y.; Leenaerts, O.; Peeters, F.M. | ||||
Title | A first-principles study of stable few-layer penta-silicene | Type | A1 Journal article | ||
Year | 2016 | Publication | Physical chemistry, chemical physics | Abbreviated Journal | Phys Chem Chem Phys |
Volume | 18 | Issue | 18 | Pages | 18486-18492 |
Keywords | A1 Journal article; Condensed Matter Theory (CMT) | ||||
Abstract | Recently penta-graphene was proposed as a stable two-dimensional carbon allotrope consisting of a single layer of interconnected carbon pentagons [Zhang et al., PNAS, 2015, 112, 2372]. Its silicon counterpart, penta-silicene, however, is not stable. In this work, we show that multilayers of penta-silicene form stable materials with semiconducting or metallic properties, depending on the stacking mode. We demonstrate their dynamic stability through their phonon spectrum and using molecular dynamics. A particular type of bilayer penta-silicene is found to have lower energy than all of the known hexagonal silicene bilayers and forms therefore the most stable bilayer silicon material predicted so far. The electronic and mechanical properties of these new silicon allotropes are studied in detail and their behavior under strain is investigated. We demonstrate that strain can be used to tune its band gap. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Cambridge | Editor | ||
Language | Wos | 000379486200077 | Publication Date | 2016-06-15 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1463-9076 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 4.123 | Times cited | 42 | Open Access | |
Notes | ; This work was supported by the Fonds Wetenschappelijk Onderzoek (FWO-Vl). The computational resources used in this work were provided by the VSC (Flemish Supercomputer Center), funded by the Hercules Foundation and the Flemish Government-department EWI. ; | Approved | Most recent IF: 4.123 | ||
Call Number | UA @ lucian @ c:irua:134942 | Serial | 4132 | ||
Permanent link to this record | |||||
Author | Dharanipragada, N.V.R.A.; Meledina, M.; Galvita, V.V.; Poelman, H.; Turner, S.; Van Tendeloo, G.; Detavernier, C.; Marin, G.B. | ||||
Title | Deactivation study of Fe2O3-CeO2 during redox cycles for CO production from CO2 | Type | A1 Journal article | ||
Year | 2016 | Publication | Industrial and engineering chemistry research | Abbreviated Journal | Ind Eng Chem Res |
Volume | 55 | Issue | 55 | Pages | 5911-5922 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | Deactivation was investigated in Fe2O3-CeO2 oxygen storage materials during repeated H-2-reduction and CO2-reoxidation. In situ XRD, XAS, and TEM were used to identify phases, crystallite sizes, and morphological changes upon cycling operation. The effect of redox cycling was investigated both in Fe-rich (80 wt % Fe2O3-CeO2) and Ce-rich (10 wt %Fe2O3-CeO2) materials. The former consisted of 100 nm Fe2O3 particles decorated with 5-10 nm Ce1-xFexO2-x. The latter presented CeO2 with incorporated Fe, i.e. a solid solution of Ce1-xFexO2-x, as the main oxygen carrier. By modeling the EXAFS Ce-K signal for as-prepared 10 wt %Fe2O3-CeO2, the amount of Fe in CeO2 was determined as 21 mol %, corresponding to 86% of the total iron content. Sintering and solid solid transformations, the latter including both new phase formation and element segregation, were identified as deactivation pathways upon redox cycling. In Ce-rich material, perovskite (CeFeO3) was identified by XRD. This phase remained inert during reduction and reoxidation, resulting in an overall lower oxygen storage capacity. Further, Fe segregated from the solid solution, thereby decreasing its reducibility. In addition, an increase in crystallite size occurred for all phases. In Fe-rich material, sintering is the main deactivation pathway, although Fe segregation from the solid solution and perovskite formation cannot be excluded. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Washington, D.C. | Editor | ||
Language | Wos | 000376825300013 | Publication Date | 2016-04-22 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0888-5885; 1520-5045 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 2.843 | Times cited | 26 | Open Access | |
Notes | Approved | Most recent IF: 2.843 | |||
Call Number | UA @ lucian @ c:irua:134214 | Serial | 4158 | ||
Permanent link to this record | |||||
Author | Lebedev, O.I.; Turner, S.; Caignaert, V.; Cherepanov, V.A.; Raveau, B. | ||||
Title | Exceptional layered ordering of cobalt and iron in perovskites | Type | A1 Journal article | ||
Year | 2016 | Publication | Chemistry of materials | Abbreviated Journal | Chem Mater |
Volume | 28 | Issue | 28 | Pages | 2907-2911 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | |||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000375810400005 | Publication Date | 2016-04-20 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0897-4756;1520-5002; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 9.466 | Times cited | 4 | Open Access | |
Notes | Approved | Most recent IF: 9.466 | |||
Call Number | UA @ lucian @ c:irua:133640 | Serial | 4178 | ||
Permanent link to this record | |||||
Author | Calizzi, M.; Venturi, F.; Ponthieu, M.; Cuevas, F.; Morandi, V.; Perkisas, T.; Bals, S.; Pasquini, L. | ||||
Title | Gas-phase synthesis of Mg-Ti nanoparticles for solid-state hydrogen storage | Type | A1 Journal article | ||
Year | 2016 | Publication | Physical chemistry, chemical physics | Abbreviated Journal | Phys Chem Chem Phys |
Volume | 18 | Issue | 18 | Pages | 141-148 |
Keywords | A1 Journal article; Engineering Management (ENM); Electron microscopy for materials research (EMAT) | ||||
Abstract | Mg-Ti nanostructured samples with different Ti contents were prepared via compaction of nanoparticles grown by inert gas condensation with independent Mg and Ti vapour sources. The growth set-up offered the option to perform in situ hydrogen absorption before compaction. Structural and morphological characterisation was carried out by X-ray diffraction, energy dispersive spectroscopy and electron microscopy. The formation of an extended metastable solid solution of Ti in hcp Mg was detected up to 15 at% Ti in the as-grown nanoparticles, while after in situ hydrogen absorption, phase separation between MgH2 and TiH2 was observed. At a Ti content of 22 at%, a metastable Mg-Ti-H fcc phase was observed after in situ hydrogen absorption. The co-evaporation of Mg and Ti inhibited nanoparticle coalescence and crystallite growth in comparison with the evaporation of Mg only. In situ hydrogen absorption was beneficial to subsequent hydrogen behaviour, studied by high pressure differential scanning calorimetry and isothermal kinetics. A transformed fraction of 90% was reached within 100 s at 300 degrees C during both hydrogen absorption and desorption. The enthalpy of hydride formation was not observed to differ from bulk MgH2. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Cambridge | Editor | ||
Language | Wos | 000368755500014 | Publication Date | 2015-11-05 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1463-9076 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 4.123 | Times cited | 31 | Open Access | Not_Open_Access |
Notes | ; Part of this work was supported by the COST Action MP1103 “Nanostructured materials for solid-state hydrogen storage”. ; | Approved | Most recent IF: 4.123 | ||
Call Number | UA @ lucian @ c:irua:131589 | Serial | 4184 | ||
Permanent link to this record | |||||
Author | Neubert, S.; Mitoraj, D.; Shevlin, S.A.; Pulisova, P.; Heimann, M.; Du, Y.; Goh, G.K.L.; Pacia, M.; Kruczała, K.; Turner, S.; Macyk, W.; Guo, Z.X.; Hocking, R.K.; Beranek, R.; | ||||
Title | Highly efficient rutile TiO2 photocatalysts with single Cu(II) and Fe(III) surface catalytic sites | Type | A1 Journal article | ||
Year | 2016 | Publication | Journal of materials chemistry A : materials for energy and sustainability | Abbreviated Journal | J Mater Chem A |
Volume | 4 | Issue | 4 | Pages | 3127-3138 |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | Highly active photocatalysts were obtained by impregnation of nanocrystalline rutile TiO2 powders with small amounts of Cu(II) and Fe(III) ions, resulting in the enhancement of initial rates of photocatalytic degradation of 4-chlorophenol in water by factors of 7 and 4, compared to pristine rutile, respectively. Detailed structural analysis by EPR and X-ray absorption spectroscopy (EXAFS) revealed that Cu(II) and Fe(III) are present as single species on the rutile surface. The mechanism of the photoactivity enhancement was elucidated by a combination of DFT calculations and detailed experimental mechanistic studies including photoluminescence measurements, photocatalytic experiments using scavengers, OH radical detection, and photopotential transient measurements. The results demonstrate that the single Cu(II) and Fe(III) ions act as effective cocatalytic sites, enhancing the charge separation, catalyzing “dark” redox reactions at the interface, thus improving the normally very low quantum yields of UV light-activated TiO2 photocatalysts. The exact mechanism of the photoactivity enhancement differs depending on the nature of the cocatalyst. Cu(II)-decorated samples exhibit fast transfer of photogenerated electrons to Cu(II/I) sites, followed by enhanced catalysis of dioxygen reduction, resulting in improved charge separation and higher photocatalytic degradation rates. At Fe(III)-modified rutile the rate of dioxygen reduction is not improved and the photocatalytic enhancement is attributed to higher production of highly oxidizing hydroxyl radicals produced by alternative oxygen reduction pathways opened by the presence of catalytic Fe(III/II) sites. Importantly, it was demonstrated that excessive heat treatment (at 450 degrees C) of photocatalysts leads to loss of activity due to migration of Cu(II) and Fe(III) ions from TiO2 surface to the bulk, accompanied by formation of oxygen vacancies. The demonstrated variety of mechanisms of photoactivity enhancement at single site catalyst-modified photocatalysts holds promise for developing further tailored photocatalysts for various applications. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Cambridge | Editor | ||
Language | Wos | 000371077300040 | Publication Date | 2015-12-30 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 2050-7488; 2050-7496 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 8.867 | Times cited | 44 | Open Access | |
Notes | Approved | Most recent IF: 8.867 | |||
Call Number | UA @ lucian @ c:irua:132322 | Serial | 4191 | ||
Permanent link to this record | |||||
Author | Roesler, C.; Aijaz, A.; Turner, S.; Filippousi, M.; Shahabi, A.; Xia, W.; Van Tendeloo, G.; Muhler, M.; Fischer, R.A. | ||||
Title | Hollow Zn/Co Zeolitic Imidazolate Framework (ZIF) and Yolk-Shell Metal@Zn/Co ZIF nanostructures | Type | A1 Journal article | ||
Year | 2016 | Publication | Chemistry: a European journal | Abbreviated Journal | Chem-Eur J |
Volume | 22 | Issue | 22 | Pages | 3304-3311 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | Metal-organic frameworks (MOFs) feature a great possibility for a broad spectrum of applications. Hollow MOF structures with tunable porosity and multifunctionality at the nanoscale with beneficial properties are desired as hosts for catalytically active species. Herein, we demonstrate the formation of well-defined hollow Zn/Co-based zeolitic imidazolate frameworks (ZIFs) by use of epitaxial growth of Zn-MOF (ZIF-8) on preformed Co-MOF (ZIF-67) nanocrystals that involve in situ self-sacrifice/excavation of the Co-MOF. Moreover, any type of metal nanoparticles can be accommodated in Zn/Co-ZIF shells to generate yolk-shell metal@ZIF structures. Transmission electron microscopy and tomography studies revealed the inclusion of these nanoparticles within hollow Zn/Co-ZIF with dominance of the Zn-MOF as shell. Our findings lead to a generalization of such hollow systems that are working effectively to other types of ZIFs. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Weinheim | Editor | ||
Language | Wos | 000371419200001 | Publication Date | 2016-01-29 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0947-6539 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 5.317 | Times cited | 43 | Open Access | |
Notes | Approved | Most recent IF: 5.317 | |||
Call Number | UA @ lucian @ c:irua:132347 | Serial | 4192 | ||
Permanent link to this record | |||||
Author | O'Sullivan, M.; Hadermann, J.; Dyer, M.S.; Turner, S.; Alaria, J.; Manning, T.D.; Abakumov, A.M.; Claridge, J.B.; Rosseinsky, M.J. | ||||
Title | Interface control by chemical and dimensional matching in an oxide heterostructure | Type | A1 Journal article | ||
Year | 2016 | Publication | Nature chemistry | Abbreviated Journal | Nat Chem |
Volume | 8 | Issue | 8 | Pages | 347-353 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | Interfaces between different materials underpin both new scientific phenomena, such as the emergent behaviour at oxide interfaces, and key technologies, such as that of the transistor. Control of the interfaces between materials with the same crystal structures but different chemical compositions is possible in many materials classes, but less progress has been made for oxide materials with different crystal structures. We show that dynamical self-organization during growth can create a coherent interface between the perovskite and fluorite oxide structures, which are based on different structural motifs, if an appropriate choice of cations is made to enable this restructuring. The integration of calculation with experimental observation reveals that the interface differs from both the bulk components and identifies the chemical bonding requirements to connect distinct oxide structures. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000372505500013 | Publication Date | 2016-02-01 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1755-4330; 1755-4349 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 25.87 | Times cited | 28 | Open Access | |
Notes | Approved | Most recent IF: 25.87 | |||
Call Number | UA @ lucian @ c:irua:133189 | Serial | 4199 | ||
Permanent link to this record | |||||
Author | Heyne, M.H.; Chiappe, D.; Meersschaut, J.; Nuytten, T.; Conard, T.; Bender, H.; Huyghebaert, C.; Radu, I.P.; Caymax, M.; de Marneffe, J.F.; Neyts, E.C.; De Gendt, S.; | ||||
Title | Multilayer MoS2 growth by metal and metal oxide sulfurization | Type | A1 Journal article | ||
Year | 2016 | Publication | Journal of materials chemistry C : materials for optical and electronic devices | Abbreviated Journal | J Mater Chem C |
Volume | 4 | Issue | 4 | Pages | 1295-1304 |
Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
Abstract | We investigated the deposition of MoS2 multilayers on large area substrates. The pre-deposition of metal or metal oxide with subsequent sulfurization is a promising technique to achieve layered films. We distinguish a different reaction behavior in metal oxide and metallic films and investigate the effect of the temperature, the H2S/H-2 gas mixture composition, and the role of the underlying substrate on the material quality. The results of the experiments suggest a MoS2 growth mechanism consisting of two subsequent process steps. At first, the reaction of the sulfur precursor with the metal or metal oxide occurs, requiring higher temperatures in the case of metallic film compared to metal oxide. At this stage, the basal planes assemble towards the diffusion direction of the reaction educts and products. After the sulfurization reaction, the material recrystallizes and the basal planes rearrange parallel to the substrate to minimize the surface energy. Therefore, substrates with low roughness show basal plane assembly parallel to the substrate. These results indicate that the substrate character has a significant impact on the assembly of low dimensional MoS2 films. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000370723300020 | Publication Date | 2016-01-05 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 2050-7526; 2050-7534 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 5.256 | Times cited | Open Access | ||
Notes | Approved | Most recent IF: 5.256 | |||
Call Number | UA @ lucian @ c:irua:132327 | Serial | 4211 | ||
Permanent link to this record | |||||
Author | Yagmurcukardes, M.; Horzum, S.; Torun, E.; Peeters, F.M.; Senger, R.T. | ||||
Title | Nitrogenated, phosphorated and arsenicated monolayer holey graphenes | Type | A1 Journal article | ||
Year | 2016 | Publication | Physical chemistry, chemical physics | Abbreviated Journal | Phys Chem Chem Phys |
Volume | 18 | Issue | 18 | Pages | 3144-3150 |
Keywords | A1 Journal article; Condensed Matter Theory (CMT) | ||||
Abstract | Motivated by a recent experiment that reported the synthesis of a new 2D material nitrogenated holey graphene (C2N) [Mahmood et al., Nat. Commun., 2015, 6, 6486], the electronic, magnetic, and mechanical properties of nitrogenated (C2N), phosphorated (C2P) and arsenicated (C2As) monolayer holey graphene structures are investigated using first-principles calculations. Our total energy calculations indicate that, similar to the C2N monolayer, the formation of the other two holey structures are also energetically feasible. Calculated cohesive energies for each monolayer show a decreasing trend going from the C2N to C2As structure. Remarkably, all the holey monolayers considered are direct band gap semiconductors. Regarding the mechanical properties (in-plane stiffness and Poisson ratio), we find that C2N has the highest in-plane stiffness and the largest Poisson ratio among the three monolayers. In addition, our calculations reveal that for the C2N, C2P and C2As monolayers, creation of N and P defects changes the semiconducting behavior to a metallic ground state while the inclusion of double H impurities in all holey structures results in magnetic ground states. As an alternative to the experimentally synthesized C2N, C2P and C2As are mechanically stable and flexible semiconductors which are important for potential applications in optoelectronics. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Cambridge | Editor | ||
Language | Wos | 000369506000095 | Publication Date | 2015-12-22 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1463-9076 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 4.123 | Times cited | 36 | Open Access | |
Notes | ; This work was supported by the Flemish Science Foundation (FWO-Vl) and the Methusalem foundation of the Flemish government. Computational resources were provided by TUBITAK ULAKBIM, High Performance and Grid Computing Center (TR-Grid e-Infrastructure). ; | Approved | Most recent IF: 4.123 | ||
Call Number | UA @ lucian @ c:irua:132313 | Serial | 4214 | ||
Permanent link to this record | |||||
Author | Sevik, C.; Çakir, D.; Gulseren, O.; Peeters, F.M. | ||||
Title | Peculiar piezoelectric properties of soft two-dimensional materials | Type | A1 Journal article | ||
Year | 2016 | Publication | The journal of physical chemistry: C : nanomaterials and interfaces | Abbreviated Journal | J Phys Chem C |
Volume | 120 | Issue | 120 | Pages | 13948-13953 |
Keywords | A1 Journal article; Engineering sciences. Technology; Condensed Matter Theory (CMT) | ||||
Abstract | Group II-VI semiconductor honeycomb monolayers have a noncentrosymmetric crystal structure and therefore are expected to be important for nano piezoelectric device applications. This motivated us to perform first principles calculations based on density functional theory to unveil the piezoelectric properties (i.e., piezoelectric stress (e(11)) and piezoelectric strain (d(11)) coefficients) of these monolayer materials with chemical formula MX (where M = Be, Mg, Ca, Sr, Ba, Zr, Cd and X = S, Se, Te). We found that these two-dimensional materials have peculiar piezoelectric properties with d(11) coefficients 1 order of magnitude larger than those of commercially utilized bulk materials. A clear trend in their piezoelectric properties emerges, which | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Washington, D.C. | Editor | ||
Language | Wos | 000379457000010 | Publication Date | 2016-06-09 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1932-7447; 1932-7455 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 4.536 | Times cited | 39 | Open Access | |
Notes | ; This work was supported by the Flemish Science Foundation (FWO-Vl), the Methusalem foundation of the Flemish government and the Bilateral program FWO-TUBITAK between Flanders and Turkey. We acknowledge the support from the Scientific and Technological Research Council of Turkey (TUBITAK-115F024). Computational resources were provided by TUBITAK ULAKBIM, High Performance and Grid Computing Center (TR-Grid e-Infrastructure), and HPC infrastructure of the University of Antwerp (Cal-cUA) a division of the Flemish Supercomputer Center (VSC), which is funded by the Hercules foundation. C.S. acknowledges the support from the Scientific and Technological Research Council of Turkey (TUBITAK-113F333) and the support from Anadolu University (BAP-1407F335, -1505F200), and the Turkish Academy of Sciences (TUBA-GEBIP). ; | Approved | Most recent IF: 4.536 | ||
Call Number | UA @ lucian @ c:irua:134948 | Serial | 4222 | ||
Permanent link to this record | |||||
Author | Ali, S.; Myasnichenko, V.S.; Neyts, E.C. | ||||
Title | Size-dependent strain and surface energies of gold nanoclusters | Type | A1 Journal article | ||
Year | 2016 | Publication | Physical chemistry, chemical physics | Abbreviated Journal | Phys Chem Chem Phys |
Volume | 18 | Issue | 18 | Pages | 792-800 |
Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
Abstract | Gold nanocluster properties exhibit unique size-dependence. In this contribution, we employ reactive molecular dynamics simulations to calculate the size- and temperature-dependent surface energies, strain energies and atomic displacements for icosahedral, cuboctahedral, truncated octahedral and decahedral Au-nanoclusters. The calculations demonstrate that the surface energy decreases with increasing cluster size at 0 K but increases with size at higher temperatures. The calculated melting curves as a function of cluster size demonstrate the Gibbs-Thomson effect. Atomic displacements and strain are found to strongly depend on the cluster size and both are found to increase with increasing cluster size. These results are of importance for understanding the size-and temperature-dependent surface processes on gold nanoclusters. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Cambridge | Editor | ||
Language | Wos | 000369480600017 | Publication Date | 2015-11-18 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1463-9076 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 4.123 | Times cited | 37 | Open Access | |
Notes | Approved | Most recent IF: 4.123 | |||
Call Number | UA @ lucian @ c:irua:131626 | Serial | 4243 | ||
Permanent link to this record | |||||
Author | Aierken, Y.; Çakir, D.; Peeters, F.M. | ||||
Title | Strain enhancement of acoustic phonon limited mobility in monolayer TiS3 | Type | A1 Journal article | ||
Year | 2016 | Publication | Physical chemistry, chemical physics | Abbreviated Journal | Phys Chem Chem Phys |
Volume | 18 | Issue | 18 | Pages | 14434-14441 |
Keywords | A1 Journal article; Condensed Matter Theory (CMT) | ||||
Abstract | Strain engineering is an effective way to tune the intrinsic properties of a material. Here, we show by using first-principles calculations that both uniaxial and biaxial tensile strain applied to monolayer TiS3 are able to significantly modify its intrinsic mobility. From the elastic modulus and the phonon dispersion relation we determine the tensile strain range where structure dynamical stability of the monolayer is guaranteed. Within this region, we find more than one order of enhancement of the acoustic phonon limited mobility at 300 K (100 K), i.e. from 1.71 x 10(4) (5.13 x 10(4)) cm(2) V-1 s(-1) to 5.53 x 10(6) (1.66 x 10(6)) cm(2) V-1 s(-1). The degree of anisotropy in both mobility and effective mass can be tuned by using tensile strain. Furthermore, we can either increase or decrease the band gap of TiS3 monolayer by applying strain along different crystal directions. This property allows us to use TiS3 not only in electronic but also in optical applications. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Cambridge | Editor | ||
Language | Wos | 000378102700036 | Publication Date | 2016-05-05 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1463-9076 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 4.123 | Times cited | 24 | Open Access | |
Notes | ; This work was supported by the Fonds Wetenschappelijk Onderzoek (FWO-V1). Computational resources were provided by HPC infrastructure of the University of Antwerp (CalcUA) a division of the Flemish Supercomputer Center (VSC), which is funded by the Hercules foundation and the Flemish Government-department EWI. ; | Approved | Most recent IF: 4.123 | ||
Call Number | UA @ lucian @ c:irua:134628 | Serial | 4250 | ||
Permanent link to this record | |||||
Author | Rozova, M.G.; Grigoriev, V.V.; Bobrikov, I.A.; Filimonov, D.S.; Zakharov, K.V.; Volkova, O.S.; Vasiliev, A.N.; Antipov, E.V.; Tsirlin, A.A.; Abakumov, A.M. | ||||
Title | Synthesis, structure and magnetic ordering of the mullite-type Bi2Fe4-xCrxO9 solid solutions with a frustrated pentagonal Cairo lattice | Type | A1 Journal article | ||
Year | 2016 | Publication | Journal of the Chemical Society : Dalton transactions | Abbreviated Journal | Dalton T |
Volume | 45 | Issue | 45 | Pages | 1192-1200 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | Highly homogeneous mullite-type solid solutions Bi2Fe4-xCrxO9 (x = 0.5, 1, 1.2) were synthesized using a soft chemistry technique followed by a solid-state reaction in Ar. The crystal structure of Bi2Fe3CrO9 was investigated using X-ray and neutron powder diffraction, transmission electron microscopy and Fe-57 Mossbauer spectroscopy (S.G. Pbam, a = 7.95579(9) angstrom , b = 8.39145(9) angstrom, c = 5.98242(7) angstrom, R-F(X-ray) = 0.022, R-F(neutron) = 0.057). The ab planes in the structure are tessellated with distorted pentagonal loops built up by three tetrahedrally coordinated Fe sites and two octahedrally coordinated Fe/Cr sites, linked together in the ab plane by corner-sharing forming a pentagonal Cairo lattice. Magnetic susceptibility measurements and powder neutron diffraction show that the compounds order antiferromagnetically (AFM) with the Neel temperatures decreasing upon increasing the Cr content from T-N similar to 250 K for x = 0 to T-N similar to 155 K for x = 1.2. The magnetic structure of Bi2Fe3CrO9 at T = 30 K is characterized by a propagation vector k = (1/2,1/2,1/2). The tetrahedrally coordinated Fe cations form singlet pairs within dimers of corner-sharing tetrahedra, but spins on the neighboring dimers are nearly orthogonal. The octahedrally coordinated (Fe, Cr) cations form antiferromagnetic up-up-down-down chains along c, while the spin arrangement in the ab plane is nearly orthogonal between nearest neighbors and collinear between second neighbors. The resulting magnetic structure is remarkably different from the one in pure Bi2Fe4O9 and features several types of spin correlations even on crystallographically equivalent exchange that may be caused by the simultaneous presence of Fe and Cr on the octahedral site. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | London | Editor | ||
Language | Wos | 000367614700041 | Publication Date | 2015-11-30 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0300-9246; 1477-9226; 1472-7773 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 4.029 | Times cited | Open Access | ||
Notes | Approved | Most recent IF: NA | |||
Call Number | UA @ lucian @ c:irua:131095 | Serial | 4257 | ||
Permanent link to this record | |||||
Author | Retuerto, M.; Skiadopoulou, S.; Li, M.R.; Abakumov, A.M.; Croft, M.; Ignatov, A.; Sarkar, T.; Abbett, B.M.; Pokorný, J.; Savinov, M.; Nuzhnyy, D.; Prokleška, J.; Abeykoon, M.; Stephens, P.W.; Hodges, J.P.; Vaněk, P.; Fennie, C.J.; Rabe, K.M.; Kamba, S.; Greenblatt, M.; | ||||
Title | Pb2MnTeO6 double perovskite : an antipolar anti-ferromagnet | Type | A1 Journal article | ||
Year | 2016 | Publication | Inorganic chemistry | Abbreviated Journal | Inorg Chem |
Volume | 55 | Issue | 55 | Pages | 4320-4329 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | Pb2MnTeO6, a new double perovskite, was synthesized. Its crystal structure was determined by synchrotron X-ray and powder neutron diffraction. Pb2MnTeO6 is monoclinic (I2/m) at room temperature with a regular arrangement of all the cations in their polyhedra. However, when the temperature is lowered to similar to 120 K it undergoes a phase transition from I2/m to C2/c structure. This transition is accompanied by a displacement of the Pb atoms from the center of their polyhedra due to the 6s2 lone-pair electrons, together with a surprising off-centering of Mn2+ (d5) magnetic cations. This strong first-order phase transition is also evidenced by specific heat, dielectric, Raman, and infrared spectroscopy measurements. The magnetic characterizations indicate an anti-ferromagnetic (AFM) order below TN approximate to 20 K; analysis of powder neutron diffraction data confirms the magnetic structure with propagation vector k = (0 1 0) and collinear AFM spins. The observed jump in dielectric permittivity near similar to 150 K implies possible anti-ferroelectric behavior; however, the absence of switching suggests that Pb2MnTeO6 can only be antipolar. First-principle calculations confirmed that the crystal and magnetic structures determined are locally stable and that anti-ferroelectric switching is unlikely to be observed in Pb2MnTeO6. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Easton, Pa | Editor | ||
Language | Wos | 000375519700027 | Publication Date | 2016-04-08 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0020-1669 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 4.857 | Times cited | 9 | Open Access | |
Notes | Approved | Most recent IF: 4.857 | |||
Call Number | UA @ lucian @ c:irua:134219 | Serial | 4258 | ||
Permanent link to this record | |||||
Author | Mikita, R.; Aharen, T.; Yamamoto, T.; Takeiri, F.; Ya, T.; Yoshimune, W.; Fujita, K.; Yoshida, S.; Tanaka, K.; Batuk, D.; Abakumov, A.M.; Brown, C.M.; Kobayashi, Y.; Kageyama, H.; | ||||
Title | Topochemical nitridation with anion vacancy -assisted N3-/O2- exchange | Type | A1 Journal article | ||
Year | 2016 | Publication | Journal of the American Chemical Society | Abbreviated Journal | J Am Chem Soc |
Volume | 138 | Issue | 138 | Pages | 3211-3217 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | We present how the introduction of anion vacancies in oxyhydrides enables a route to access new oxynitrides, by conducting ammonolysis of perovskite oxyhydride EuTiO3-xHx (x similar to 0.18). At 400 degrees C, similar to our studies on BaTiO3-xHx, hydride lability enables a low temperature direct ammonolysis of EUTi3.82+O-2.82/H-0.18, leading to the N3-/H--exchanged product EuTi4+O2.82No0.12 square 0.06 center dot When the ammonolysis temperature was increased up to 800 degrees C, we observed a further nitridation involving N3-/O2- exchange, yielding a fully oxidized Eu3+Ti4+O2N with the GdFeO3-type distortion (Pnma) as a metastable phase, instead of pyrochlore structure. Interestingly, the same reactions using the oxide EuTiO3 proceeded through a 1:1 exchange of N3- with O-2 only above 600 degrees C and resulted in incomplete nitridation to EuTi02.25N0.75, indicating that anion vacancies created during the initial nitridation process of EuTiO2.82H0.18 play a crucial role in promoting anion (N3-/O2-) exchange at high temperatures. Hence, by using (hydride-induced) anion-deficient precursors, we should be able to expand the accessible anion composition of perovskite oxynitrides. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Washington, D.C. | Editor | ||
Language | Wos | 000371945800055 | Publication Date | 2016-02-08 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0002-7863 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 13.858 | Times cited | 28 | Open Access | |
Notes | Approved | Most recent IF: 13.858 | |||
Call Number | UA @ lucian @ c:irua:133156 | Serial | 4266 | ||
Permanent link to this record | |||||
Author | Ilin, A.; Martyshov, M.; Forsh, E.; Forsh, P.; Rumyantseva, M.; Abakumov, A.; Gaskov, A.; Kashkarov, P. | ||||
Title | UV effect on NO2 sensing properties of nanocrystalline In2O3 | Type | A1 Journal article | ||
Year | 2016 | Publication | Sensors and actuators : B : chemical | Abbreviated Journal | Sensor Actuat B-Chem |
Volume | 231 | Issue | 231 | Pages | 491-496 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | Nanocrystalline indium oxide films with extremely small grains in range of 7-40 nm are prepared by sol-gel method. The influence of grain size on the sensitivity of indium oxide to nitrogen dioxide in low concentration at room temperature is investigated under the UV illumination and without illumination. The sensitivity increases with the decrease of grain sizes when In2O3 is illuminated while in the dark In2O3 with intermediate grain size exhibits the highest response. An explanation of the different behavior of the In2O3 with different grain size sensitivity to NO2 under illumination and in the dark is proposed. We demonstrate that pulsed illumination may be used for NO2 detection at room temperature that significantly reduces the power consumption of sensor. (C) 2016 Elsevier B.V. All rights reserved. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Lausanne | Editor | ||
Language | Wos | 000374330900055 | Publication Date | 2016-03-16 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0925-4005 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 5.401 | Times cited | 27 | Open Access | |
Notes | Approved | Most recent IF: 5.401 | |||
Call Number | UA @ lucian @ c:irua:133630 | Serial | 4273 | ||
Permanent link to this record | |||||
Author | van der Stam, W.; Gradmann, S.; Altantzis, T.; Ke, X.; Baldus, M.; Bals, S.; de Mello Donega, C. | ||||
Title | Shape Control of Colloidal Cu2-x S Polyhedral Nanocrystals by Tuning the Nucleation Rates | Type | A1 Journal article | ||
Year | 2016 | Publication | Chemistry of materials | Abbreviated Journal | Chem Mater |
Volume | 28 | Issue | 28 | Pages | 6705-6715 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | Synthesis protocols for colloidal nanocrystals (NCs) with narrow size and shape distributions are of particular interest for the successful implementation of these nanocrystals into devices. Moreover, the preparation of NCs with well-defined crystal phases is of key importance. In this work, we show that Sn(IV)-thiolate complexes formed in situ strongly influence the nucleation and growth rates of colloidal Cu2-x S polyhedral NCs, thereby dictating their final size, shape, and crystal structure. This allowed us to successfully synthesize hexagonal bifrustums and hexagonal bipyramid NCs with low-chalcocite crystal structure, and hexagonal nanoplatelets with various thicknesses and aspect ratios with the djurleite crystal structure, by solely varying the concentration of Sn(IV)-additives (namely, SnBr4) in the reaction medium. Solution and solid-state 119Sn NMR measurements show that SnBr4 is converted in situ to Sn(IV)-thiolate complexes, which increase the Cu2-x S nucleation barrier without affecting the precursor conversion rates. This influences both the nucleation and growth rates in a concentration-dependent fashion and leads to a better separation between nucleation and growth. Our approach of tuning the nucleation and growth rates with in situ-generated Sn-thiolate complexes might have a more general impact due to the availability of various metal-thiolate complexes, possibly resulting in polyhedral NCs of a wide variety of metal-sulfide compositions. | ||||
Address | Condensed Matter and Interfaces, Debye Institute for Nanomaterials Science, Utrecht University , P.O. Box 80000, 3508 TA Utrecht, The Netherlands | ||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | English | Wos | 000384399000037 | Publication Date | 2016-09-02 |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0897-4756 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 9.466 | Times cited | 27 | Open Access | OpenAccess |
Notes | W.v.d.S. and C.d.M.D. acknowledge financial support from the division of Chemical Sciences (CW) of The Netherlands Organization for Scientific Research (NWO) under grant number ECHO.712.012.001. M.B. also gratefully acknowledges NWO for funding the NMR infrastructure (Middle Groot program, grant number 700.58.102). S.B. acknowledges financial support from the European Research Council (ERC Starting Grant # 335078-COLOURATOMS).; ECAS_Sara; (ROMEO:white; preprint:; postprint:restricted 12 months embargo; pdfversion:cannot); | Approved | Most recent IF: 9.466 | ||
Call Number | EMAT @ emat @ c:irua:135928 | Serial | 4285 | ||
Permanent link to this record | |||||
Author | Perez, A.J.; Batuk, D.; Saubanère, M.; Rousse, G.; Foix, D.; Mc Calla, E.; J. Berg, E.; Dugas, R.; van den Bos, K. H. W.; Doublet, M.-L.; Gonbeau, D.; Abakumov, A.M.; Van Tendeloo, G.; Tarascon, J.-M. | ||||
Title | Strong oxygen participation in the redox governing the structural and electrochemical properties of Na-rich layered oxide Na2IrO3 | Type | A1 Journal article | ||
Year | 2016 | Publication | Chemistry of materials | Abbreviated Journal | Chem Mater |
Volume | 28 | Issue | 28 | Pages | 8278-8288 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | The recent revival of the Na-ion battery concept has prompted intense activities in the search for new Na-based layered oxide positive electrodes. The largest capacity to date was obtained for a Na-deficient layered oxide that relies on cationic redox processes only. To go beyond this limit, we decided to chemically manipulate these Na-based layered compounds in a way to trigger the participation of the anionic network. We herein report the electrochemical properties of a Na-rich phase Na2IrO3, which can reversibly cycle 1.5 Na+ per formula unit while not suffering from oxygen release nor cationic migrations. Such large capacities, as deduced by complementary XPS, X-ray/neutron diffraction and transmission electron microscopy measurements, arise from cumulative cationic and anionic redox processes occurring simultaneously at potentials as low as 3.0 V. The inability to remove more than 1.5 Na+ is rooted in the formation of an O1-type phase having highly stabilized Na sites as confirmed by DFT calculations, which could rationalize as well the competing metal/oxygen redox processes in Na2IrO3. This work will help to define the most fertile directions in the search for novel high energy Na-rich materials based on more sustainable elements than Ir. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000388914500021 | Publication Date | 2016-10-17 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0897-4756 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 9.466 | Times cited | 45 | Open Access | |
Notes | The authors thank Montse Casas-Cabanas and Marine Reynaud for discussions about the FAULTS program, Sandra Van Aert for her great help in guiding us towards the use of the statistical parameter estimation method for establishing the O-O histogram, and Thomas Hansen and Vladimir Pomjakushin for their precious help in neutron diffraction experiments. This work is based on experiments performed at the Swiss spallation neutron source SINQ, Paul Scherrer Institute, Villigen, Switzerland, and at Institut Laue Langevin, Grenoble, France. Use of the 11-BM mail service of the APS at Argonne National Laboratory was supported by the U.S. department of Energy under contract No. DE-AC02-06CH11357 and is greatly acknowledged. | Approved | Most recent IF: 9.466 | ||
Call Number | EMAT @ emat @ c:irua:135994 | Serial | 4287 | ||
Permanent link to this record | |||||
Author | Aghaei, M.; Lindner, H.; Bogaerts, A. | ||||
Title | Ion Clouds in the Inductively Coupled Plasma Torch: A Closer Look through Computations | Type | A1 Journal article | ||
Year | 2016 | Publication | Analytical chemistry | Abbreviated Journal | Anal Chem |
Volume | 88 | Issue | 88 | Pages | 8005-8018 |
Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
Abstract | We have computationally investigated the introduction of copper elemental particles in an inductively coupled plasma torch connected to a sampling cone, including for the first time the ionization of the sample. The sample is inserted as liquid particles, which are followed inside the entire torch, i.e., from the injector inlet up to the ionization and reaching the sampler. The spatial position of the ion clouds inside the torch as well as detailed information on the copper species fluxes at the position of the sampler orifice and the exhausts of the torch are provided. The effect of on- and off-axis injection is studied. We clearly show that the ion clouds of on-axis injected material are located closer to the sampler with less radial diffusion. This guarantees a higher transport efficiency through the sampler cone. Moreover, our model reveals the optimum ranges of applied power and flow rates, which ensure the proper position of ion clouds inside the torch, i.e., close enough to the sampler to increase the fraction that can enter the mass spectrometer and with minimum loss of material toward the exhausts as well as a sufficiently high plasma temperature for efficient ionization. | ||||
Address | Research Group PLASMANT, Chemistry Department, University of Antwerp , Universiteitsplein 1, 2610 Antwerp, Belgium | ||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | English | Wos | 000381654800020 | Publication Date | 2016-07-26 |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0003-2700 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 6.32 | Times cited | 9 | Open Access | |
Notes | The authors gratefully acknowledge financial support from the Fonds voor Wetenschappelijk Onderzoek (FWO), Grant Number 6713. The computational work was carried out using the Turing HPC infrastructure at the CalcUA core facility of the Universiteit Antwerpen (UA), a division of the Flemish Supercomputer Center VSC, funded by the Hercules Foundation, the Flemish Government (department EWI), and the UA. | Approved | Most recent IF: 6.32 | ||
Call Number | PLASMANT @ plasmant @ c:irua:135644 | Serial | 4293 | ||
Permanent link to this record | |||||
Author | Huygh, S.; Bogaerts, A.; Neyts, E.C. | ||||
Title | How Oxygen Vacancies Activate CO2 Dissociation on TiO2 Anatase (001) | Type | A1 Journal article | ||
Year | 2016 | Publication | The journal of physical chemistry: C : nanomaterials and interfaces | Abbreviated Journal | J Phys Chem C |
Volume | 120 | Issue | 120 | Pages | 21659-21669 |
Keywords | A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
Abstract | The adsorption, dissociation, and diffusion of CO2 on the anatase (001) surface was studied using DFT by means of the generalized gradient approximation using the Perdew−Burcke−Ernzerhof (PBE)-functional and applying corrections for long-range dispersion interactions. Different stable adsorption configurations were identified for the fully oxidized surface. The most stable adsorption configuration is the monodentated carbonate-like structure. Small energy barriers were identified for the conversion of a physisorbed to a chemisorbed configuration. CO2 dissociation is found to be unfeasible on the stoichiometric surface. The introduction of oxygen vacancy defects gives rise to new highly stable adsorption configurations with a stronger activation of the C−O bonds. This leads to the possibility of exothermic dissociation of CO2 with barriers up to 22.2 kcal/mol, corresponding to chemical lifetimes of less than 4 s at 300 K. These reactions cause a CO molecule to be formed, which will easily desorb, and the reduced surface to become oxidized. It is clear that oxygen vacancy defects play a key role in the catalytic activity of an anatase (001) surface. Oxygen vacancies play an important role in the dissociation of CO2 on the anatase (001) surface, and will play a significant role in complex problems, such as the catalytic conversion of CO2 to value-added chemicals. |
||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000384626800055 | Publication Date | 2016-09-02 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1932-7447 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 4.536 | Times cited | 49 | Open Access | |
Notes | Stijn Huygh is funded as an aspirant of the Research Foundation Flanders (FWO, project number 11C0115N). This work was carried out using the Turing HPC infrastructure at the CalcUA core facility of the Universiteit Antwerpen (UAntwerpen), a division of the Flemish Supercomputer Center VSC, funded by the Hercules Foundation, the Flemish Government (department EWI), and the UAntwerpen. | Approved | Most recent IF: 4.536 | ||
Call Number | PLASMANT @ plasmant @ c:irua:136164 | Serial | 4291 | ||
Permanent link to this record | |||||
Author | Mikhailova, D.; Karakulina, O.M.; Batuk, D.; Hadermann, J.; Abakumov, A.M.; Herklotz, M.; Tsirlin, A.A.; Oswald, S.; Giebeler, L.; Schmidt, M.; Eckert, J.; Knapp, M.; Ehrenberg, H. | ||||
Title | Layered-to-Tunnel Structure Transformation and Oxygen Redox Chemistry in LiRhO2upon Li Extraction and Insertion | Type | A1 Journal article | ||
Year | 2016 | Publication | Inorganic chemistry | Abbreviated Journal | Inorg Chem |
Volume | 55 | Issue | 55 | Pages | 7079-7089 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | Layered Li(M,Li)O2 (where M is a transition metal) ordered rock-salt-type structures are used in advanced metal-ion batteries as one of the best hosts for the reversible intercalation of Li ions. Besides the conventional redox reaction involving oxidation/reduction of the M cation upon Li extraction/insertion, creating oxygen-located holes because of the partial oxygen oxidation increases capacity while maintaining the oxidized oxygen species in the lattice through high covalency of the M–O bonding. Typical degradation mechanism of the Li(M,Li)O2 electrodes involves partially irreversible M cation migration toward the Li positions, resulting in gradual capacity/voltage fade. Here, using LiRhO2 as a model system (isostructural and isoelectronic to LiCoO2), for the first time, we demonstrate an intimate coupling between the oxygen redox and M cation migration. A formation of the oxidized oxygen species upon electrochemical Li extraction coincides with transformation of the layered Li1–xRhO2 structure into the γ-MnO2-type rutile–ramsdellite intergrowth LiyRh3O6 structure with rutile-like [1 × 1] channels along with bigger ramsdellite-like [2 × 1] tunnels through massive and concerted Rh migration toward the empty positions in the Li layers. The oxidized oxygen dimers with the O–O distances as short as 2.26 Å are stabilized in this structure via the local Rh–O configuration reminiscent to that in the μ-peroxo-μ-hydroxo Rh complexes. The LiyRh3O6 structure is remarkably stable upon electrochemical cycling illustrating that proper structural implementation of the oxidized oxygen species can open a pathway toward deliberate employment of the anion redox chemistry in high-capacity/high-voltage positive electrodes for metal-ion batteries. Upon chemical or electrochemical oxidation, layered LiRhO2 shows a unique structural transformation that involves both cation migration and oxidation of oxygen resulting in a stable tunnel-like rutile−ramsdellite intergrowth LiyRh3O6 structure. This structure demonstrates excellent performance with the steady and reversible capacity of ∼200 mAh/g. The stability of LiyRh3O6 is rooted in the accommodation of partially oxidized oxygen species through the formation of short O−O distances that are compatible with the connectivity of RhO6 octahedra. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000380181400035 | Publication Date | 2016-07-18 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0020-1669 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 4.857 | Times cited | 12 | Open Access | |
Notes | Bundesministerium fur Bildung und Forschung, 03SF0477B ; Fonds Wetenschappelijk Onderzoek, G040116N ; | Approved | Most recent IF: 4.857 | ||
Call Number | EMAT @ emat @ c:irua:140848 | Serial | 4424 | ||
Permanent link to this record | |||||
Author | Berends, A.C.; Rabouw, F.T.; Spoor, F.C.M.; Bladt, E.; Grozema, F.C.; Houtepen, A.J.; Siebbeles, L.D.A.; de Donega, C.M. | ||||
Title | Radiative and nonradiative recombination in CuInS2 nanocrystals and CuInS2-based core/shell nanocrystals | Type | A1 Journal article | ||
Year | 2016 | Publication | The journal of physical chemistry letters | Abbreviated Journal | J Phys Chem Lett |
Volume | 7 | Issue | 7 | Pages | 3503-3509 |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | Luminescent copper indium sulfide (CIS) nanocrystals are a potential solution to the toxicity issues associated with Cd- and Pb-based nanocrystals. However, the development of high-quality CIS nanocrystals has been complicated by insufficient knowledge of the electronic structure and of the factors that lead to luminescence quenching. Here we investigate the exciton decay pathways in CIS nanocrystals using time resolved photoluminescence and transient absorption spectroscopy. Core-only CIS nanocrystals with low quantum yield are compared to core/shell nanocrystals (CIS/ZnS and CIS/CdS) with higher quantum yield. Our measurements support the model of photoluminescence by radiative recombination of a conduction band electron with a localized hole. Moreover, we find that photoluminescence quenching in low-quantum-yield nanocrystals involves initially uncoupled decay pathways for the electron and hole. The electron decay pathway determines whether the exciton recombines radiatively or nonradiatively. The development of high-quality CIS nanocrystals should therefore focus on the elimination of electron traps. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | American Chemical Society | Place of Publication | Washington, D.C | Editor | |
Language | Wos | 000382603300037 | Publication Date | 2016-08-23 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1948-7185 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 9.353 | Times cited | 67 | Open Access | |
Notes | Approved | Most recent IF: 9.353 | |||
Call Number | UA @ lucian @ c:irua:135715 | Serial | 4308 | ||
Permanent link to this record |