Records |
Author |
Yusupov, M.; Saraiva, M.; Depla, D.; Bogaerts, A. |
Title |
Sputter deposition of MgxAlyOz thin films in a dual-magnetron device : a multi-species Monte Carlo model |
Type |
A1 Journal article |
Year |
2012 |
Publication |
New journal of physics |
Abbreviated Journal |
New J Phys |
Volume |
14 |
Issue |
7 |
Pages |
073043 |
Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
A multi-species Monte Carlo (MC) model, combined with an analytical surface model, has been developed in order to investigate the general plasma processes occurring during the sputter deposition of complex oxide films in a dual-magnetron sputter deposition system. The important plasma species, such as electrons, Ar+ ions, fast Ar atoms and sputtered metal atoms (i.e. Mg and Al atoms) are described with the so-called multi-species MC model, whereas the deposition of MgxAlyOz films is treated by an analytical surface model. Targetsubstrate distances for both magnetrons in the dual-magnetron setup are varied for the purpose of growing stoichiometric complex oxide thin films. The metal atoms are sputtered from pure metallic targets, whereas the oxygen flux is only directed toward the substrate and is high enough to obtain fully oxidized thin films but low enough to avoid target poisoning. The calculations correspond to typical experimental conditions applied to grow these complex oxide films. In this paper, some calculation results are shown, such as the densities of various plasma species, their fluxes toward the targets and substrate, the deposition rates, as well as the film stoichiometry. Moreover, some results of the combined model are compared with experimental observations. Note that this is the first complete model, which can be applied for large and complicated magnetron reactor geometries, such as dual-magnetron configurations. With this model, we are able to describe all important plasma species as well as the deposition process. It can also be used to predict film stoichiometries of complex oxide films on the substrate. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Bristol |
Editor |
|
Language |
|
Wos ![sorted by Wos field, descending order (down)](img/sort_desc.gif) |
000307072500003 |
Publication Date |
2012-07-21 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1367-2630; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
3.786 |
Times cited |
2 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 3.786; 2012 IF: 4.063 |
Call Number |
UA @ lucian @ c:irua:100100 |
Serial |
3111 |
Permanent link to this record |
|
|
|
Author |
Teodoru, S.; Kusano, Y.; Bogaerts, A. |
Title |
The effect of O2 in a humid O2/N2/NOx gas mixture on NOx and N2O remediation by an atmospheric pressure dielectric barrier discharge |
Type |
A1 Journal article |
Year |
2012 |
Publication |
Plasma processes and polymers |
Abbreviated Journal |
Plasma Process Polym |
Volume |
9 |
Issue |
7 |
Pages |
652-689 |
Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
A numerical model for NxOy remediation in humid air plasma produced with a dielectric barrier discharge at atmospheric pressure is presented. Special emphasis is given to NO2 and N2O reduction with the decrease of O2 content in the feedstock gas. A detailed reaction mechanism including electronic and ionic processes, as well as the contribution of radicals and excited atomic/molecular species is proposed. The temporal evolution of the densities of NO, NO2 and N2O species, and some other by-products, is analyzed, and the major pathways for the NxOy remediation are discussed for one pulse. Subsequently, simulations are presented for a multi-pulses case, where three O2 contents are tested for optimization of the remediation process. It is found that when the gas mixture O2/N2/H2O/NOx has no initial O2 content, the best NOx and N2O remediation is achieved. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Weinheim |
Editor |
|
Language |
|
Wos ![sorted by Wos field, descending order (down)](img/sort_desc.gif) |
000306279500005 |
Publication Date |
2012-03-14 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1612-8850; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
2.846 |
Times cited |
24 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 2.846; 2012 IF: 3.730 |
Call Number |
UA @ lucian @ c:irua:100920 |
Serial |
842 |
Permanent link to this record |
|
|
|
Author |
Wendelen, W.; Mueller, B.Y.; Autrique, D.; Rethfeld, B.; Bogaerts, A. |
Title |
Space charge corrected electron emission from an aluminum surface under non-equilibrium conditions |
Type |
A1 Journal article |
Year |
2012 |
Publication |
Journal of applied physics |
Abbreviated Journal |
J Appl Phys |
Volume |
111 |
Issue |
11 |
Pages |
113110 |
Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
A theoretical study has been conducted of ultrashort pulsed laser induced electron emission from an aluminum surface. Electron emission fluxes retrieved from the commonly employed Fowler-DuBridge theory were compared to fluxes based on a laser-induced non-equilibrium electron distribution. As a result, the two-and three-photon photoelectron emission parameters for the Fowler-DuBridge theory have been approximated. We observe that at regimes where photoemission is important, laser-induced electron emission evolves in a more smooth manner than predicted by the Fowler-DuBridge theory. The importance of the actual electron distribution decreases at higher laser fluences, whereas the contribution of thermionic emission increases. Furthermore, the influence of a space charge effect on electron emission was evaluated by a one dimensional particle-in-cell model. Depending on the fluences, the space charge reduces the electron emission by several orders of magnitude. The influence of the electron emission flux profiles on the effective electron emission was found to be negligible. However, a non-equilibrium electron velocity distribution increases the effective electron emission significantly. Our results show that it is essential to consider the non-equilibrium electron distribution as well as the space charge effect for the description of laser-induced photoemission. (C) 2012 American Institute of Physics. [http://dx.doi.org/10.1063/1.4729071] |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
American Institute of Physics |
Place of Publication |
New York, N.Y. |
Editor |
|
Language |
|
Wos ![sorted by Wos field, descending order (down)](img/sort_desc.gif) |
000305401400043 |
Publication Date |
2012-06-14 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0021-8979; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
2.068 |
Times cited |
30 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 2.068; 2012 IF: 2.210 |
Call Number |
UA @ lucian @ c:irua:100300 |
Serial |
3057 |
Permanent link to this record |
|
|
|
Author |
Tinck, S.; Bogaerts, A. |
Title |
Modeling SiH4/O2/Ar inductively coupled plasmas used for filling of microtrenches in shallow trench isolation (STI) |
Type |
A1 Journal article |
Year |
2012 |
Publication |
Plasma processes and polymers |
Abbreviated Journal |
Plasma Process Polym |
Volume |
9 |
Issue |
5 |
Pages |
522-539 |
Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
Modeling results are presented to gain a better insight in the properties of a SiH4/O2/Ar inductively coupled plasma (ICP) and how it interacts with a silicon substrate (wafer), as applied in the microelectronics industry for the fabrication of electronic devices. The SiH4/O2/Ar ICP is used for the filling of microtrenches with isolating material (SiO2), as applied in shallow trench isolation (STI). In this article, a detailed reaction set that describes the plasma chemistry of SiH4/O2/Ar discharges as well as surface processes, such as sputtering, oxidation, and deposition, is presented. Results are presented on the plasma properties during the plasma enhanced chemical vapor deposition process (PECVD) for different gas ratios, as well as on the shape of the filled trenches and the surface compositions of the deposited layers. For the operating conditions under study it is found that the most important species accounting for deposition are SiH2, SiH3O, SiH3 and SiH2O, while SiH+2, SiH+3, O+2 and Ar+ are the dominant species for sputtering of the surface. By diluting the precursor gas (SiH4) in the mixture, the deposition rate versus sputtering rate can be controlled for a desired trench filling process. From the calculation results it is clear that a high deposition rate will result in undesired void formation during the trench filling, while a small deposition rate will result in undesired trench bottom and mask damage by sputtering. By varying the SiH4/O2 ratio, the chemical composition of the deposited layer will be influenced. However, even at the highest SiH4/O2 ratio investigated (i.e., 3.2:1; low oxygen content), the bulk deposited layer consists mainly of SiO2, suggesting that low-volatile silane species deposit first and subsequently become oxidized instead of being oxidized first in the plasma before deposition. Finally, it was found that the top surface of the deposited layer contained less oxygen due to preferential sputtering of O atoms, making the top layer more Si-rich. However, this effect is negligible at a SiH4/O2 ratio of 2:1 or lower. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Weinheim |
Editor |
|
Language |
|
Wos ![sorted by Wos field, descending order (down)](img/sort_desc.gif) |
000303858100010 |
Publication Date |
2012-03-06 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1612-8850; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
2.846 |
Times cited |
5 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 2.846; 2012 IF: 3.730 |
Call Number |
UA @ lucian @ c:irua:99127 |
Serial |
2142 |
Permanent link to this record |
|
|
|
Author |
Zhao, S.-X.; Gao, F.; Wang, Y.-N.; Bogaerts, A. |
Title |
The effect of F2 attachment by low-energy electrons on the electron behaviour in an Ar/CF4 inductively coupled plasma |
Type |
A1 Journal article |
Year |
2012 |
Publication |
Plasma sources science and technology |
Abbreviated Journal |
Plasma Sources Sci T |
Volume |
21 |
Issue |
2 |
Pages |
025008-025008,13 |
Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
The electron behaviour in an Ar/CF4 inductively coupled plasma is investigated by a Langmuir probe and a hybrid model. The simulated and measured results include electron density, temperature and electron energy distribution function for different values of Ar/CF4 ratio, coil power and gas pressure. The hybrid plasma equipment model simulations show qualitative agreement with experiment. The effect of F2 electron attachment on the electron behaviour is explored by comparing two sets of data based on different F atom boundary conditions. It is demonstrated that electron attachment at F2 molecules is responsible for the depletion of low-energy electrons, causing a density decrease as well as a temperature increase when CF4 is added to an Ar plasma. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
Institute of Physics |
Place of Publication |
Bristol |
Editor |
|
Language |
|
Wos ![sorted by Wos field, descending order (down)](img/sort_desc.gif) |
000302779400022 |
Publication Date |
2012-03-12 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0963-0252;1361-6595; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
3.302 |
Times cited |
23 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 3.302; 2012 IF: 2.515 |
Call Number |
UA @ lucian @ c:irua:96549 |
Serial |
841 |
Permanent link to this record |
|
|
|
Author |
Aghaei, M.; Lindner, H.; Bogaerts, A. |
Title |
Effect of a mass spectrometer interface on inductively coupled plasma characteristics : a computational study |
Type |
A1 Journal article |
Year |
2012 |
Publication |
Journal of analytical atomic spectrometry |
Abbreviated Journal |
J Anal Atom Spectrom |
Volume |
27 |
Issue |
4 |
Pages |
604-610 |
Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
An inductively coupled plasma connected to a mass spectrometer interface (sampling cone) is computationally investigated. Typical plasma characteristics, such as gas flow velocity, plasma temperature and electron density, are calculated in two dimensions (cylindrical symmetry) and compared with and without a mass spectrometer sampling interface. The results obtained from our model compare favorably with experimental data reported in the literature. A dramatic increase in the plasma velocity is reported in the region close to the interface. Furthermore, a cooled metal interface lowers the plasma temperature and electron density on the axial channel very close to the sampling cone but the corresponding values in the off axial regions are increased. Therefore, the effect of the interface strongly depends on the measurement position. It is shown that even a small shift from the actual position of the sampler leads to a considerable change of the results. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
London |
Editor |
|
Language |
|
Wos ![sorted by Wos field, descending order (down)](img/sort_desc.gif) |
000301496700005 |
Publication Date |
2012-02-22 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0267-9477;1364-5544; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
3.379 |
Times cited |
18 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 3.379; 2012 IF: 3.155 |
Call Number |
UA @ lucian @ c:irua:97386 |
Serial |
791 |
Permanent link to this record |
|
|
|
Author |
Neyts, E.C.; van Duin, A.C.T.; Bogaerts, A. |
Title |
Insights in the plasma-assisted growth of carbon nanotubes through atomic scale simulations : effect of electric field |
Type |
A1 Journal article |
Year |
2012 |
Publication |
Journal of the American Chemical Society |
Abbreviated Journal |
J Am Chem Soc |
Volume |
134 |
Issue |
2 |
Pages |
1256-1260 |
Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
Carbon nanotubes (CNTs) are nowadays routinely grown in a thermal CVD setup. State-of-the-art plasma-enhanced CVD (PECVD) growth, however, offers advantages over thermal CVD. A lower growth temperature and the growth of aligned freestanding single-walled CNTs (SWNTs) makes the technique very attractive. The atomic scale growth mechanisms of PECVD CNT growth, however, remain currently entirely unexplored. In this contribution, we employed molecular dynamics simulations to focus on the effect of applying an electric field on the SWNT growth process, as one of the effects coming into play in PECVD. Using sufficiently strong fields results in (a) alignment of the growing SWNTs, (b) a better ordering of the carbon network, and (c) a higher growth rate relative to thermal growth rate. We suggest that these effects are due to the small charge transfer occurring in the Ni/C system. These simulations constitute the first study of PECVD growth of SWNTs on the atomic level. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Washington, D.C. |
Editor |
|
Language |
|
Wos ![sorted by Wos field, descending order (down)](img/sort_desc.gif) |
000301084300086 |
Publication Date |
2011-11-30 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0002-7863;1520-5126; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
13.858 |
Times cited |
56 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 13.858; 2012 IF: 10.677 |
Call Number |
UA @ lucian @ c:irua:97163 |
Serial |
1673 |
Permanent link to this record |
|
|
|
Author |
Zhang, Y.-R.; Xu, X.; Bogaerts, A.; Wang, Y.-N. |
Title |
Fluid simulation of the phase-shift effect in hydrogen capacitively coupled plasmas: 2 : radial uniformity of the plasma characteristics |
Type |
A1 Journal article |
Year |
2012 |
Publication |
Journal of physics: D: applied physics |
Abbreviated Journal |
J Phys D Appl Phys |
Volume |
45 |
Issue |
1 |
Pages |
015203-015203,13 |
Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
A two-dimensional fluid model, including the full set of Maxwell equations, has been developed and applied to investigate the effect of a phase shift between two power sources on the radial uniformity of several plasma characteristics in a hydrogen capacitively coupled plasma. This study was carried out at various frequencies in the range 13.56200 MHz. When the frequency is low, at 13.56 MHz, the plasma density is characterized by an off-axis peak when both power sources are in-phase (phgr = 0), and the best radial uniformity is obtained at phgr = π. This trend can be explained because the radial nonuniformity caused by the electrostatic edge effect can be effectively suppressed by the phase-shift effect at a phase difference equal to π. When the frequency rises to 60 MHz, the plasma density profiles shift smoothly from edge-peaked over uniform to centre-peaked as the phase difference increases, due to the pronounced standing-wave effect, and the best radial uniformity is reached at phgr = 0.3π. At a frequency of 100 MHz, a similar behaviour is observed, except that the maximum of the plasma density moves again towards the radial edge at the reverse-phase case (phgr = π), because of the dominant skin effect. When the frequency is 200 MHz, the bulk plasma density increases significantly with increasing phase-shift values, and a better uniformity is obtained at phgr = 0.4π. This is because the density in the centre increases faster than at the radial edge as the phase difference rises, due to the increasing power deposition Pz in the centre and the decreasing power density Pr at the radial edge. As the phase difference increases to π, the maximum near the radial edge becomes obvious again. This is because the skin effect has a predominant influence on the plasma density under this condition, resulting in a high density at the radial edge. Moreover, the axial ion flux increases monotonically with phase difference, and exhibits similar profiles to the plasma density. The calculation results illustrate that the radial uniformity of the various plasma characteristics is strongly dependent on the applied frequency and the phase shift between both power sources, which is important to realize, for controlling the uniformity of the plasma etch and deposition processes. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
London |
Editor |
|
Language |
|
Wos ![sorted by Wos field, descending order (down)](img/sort_desc.gif) |
000298290000012 |
Publication Date |
2011-12-12 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0022-3727;1361-6463; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
2.588 |
Times cited |
15 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 2.588; 2012 IF: 2.528 |
Call Number |
UA @ lucian @ c:irua:92852 |
Serial |
1231 |
Permanent link to this record |
|
|
|
Author |
Zhang, Y.-R.; Xu, X.; Bogaerts, A.; Wang, Y.-N. |
Title |
Fluid simulation of the phase-shift effect in hydrogen capacitively coupled plasmas: 1 : transient behaviour of electrodynamics and power deposition |
Type |
A1 Journal article |
Year |
2012 |
Publication |
Journal of physics: D: applied physics |
Abbreviated Journal |
J Phys D Appl Phys |
Volume |
45 |
Issue |
1 |
Pages |
015202-015202,11 |
Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
A two-dimensional self-consistent fluid model coupled with the full set of Maxwell equations is established to investigate the phase-shift effect on the transient behaviour of electrodynamics and power deposition in a hydrogen capacitively coupled plasma. The effect has been examined at 13.56 MHz and 100 MHz, respectively, because of the different phase-shift modulation when the electromagnetic effects are dominant. The results indicate that the spatiotemporal distributions of the plasma characteristics obtained for various phase-shift cases are obviously different both in shape and especially in absolute values. Indeed, when the phase difference varies from 0 to π, there is an increase in the electron flux, thus the power deposition becomes more pronounced. At the frequency of 13.56 MHz, the axial electron flux in the bulk plasma becomes uniform along the z-axis, and the radial electron flux exhibits two peaks within one period at the reverse-phase case, whereas the oscillation is less pronounced at the in-phase case. Furthermore, in the very high frequency discharge, the radial electron flux is alternately positive and negative with four peaks during one period, and the ionization mainly occurs in the sheath region, due to the prominent power deposition there at a phase difference equal to π. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
London |
Editor |
|
Language |
|
Wos ![sorted by Wos field, descending order (down)](img/sort_desc.gif) |
000298290000011 |
Publication Date |
2011-12-12 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0022-3727;1361-6463; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
2.588 |
Times cited |
57 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 2.588; 2012 IF: 2.528 |
Call Number |
UA @ lucian @ c:irua:92851 |
Serial |
1230 |
Permanent link to this record |
|
|
|
Author |
Lindner, H.; Murtazin, A.; Groh, S.; Niemax, K.; Bogaerts, A. |
Title |
Simulation and experimental studies on plasma temperature, flow velocity, and injector diameter effects for an inductively coupled plasma |
Type |
A1 Journal article |
Year |
2011 |
Publication |
Analytical chemistry |
Abbreviated Journal |
Anal Chem |
Volume |
83 |
Issue |
24 |
Pages |
9260-9266 |
Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
An inductively coupled plasma (ICP) is analyzed by means of experiments and numerical simulation. Important plasma properties are analyzed, namely, the effective temperature inside the central channel and the mean flow velocity inside the plasma. Furthermore, the effect of torches with different injector diameters is studied by the model. The temperature inside the central channel is determined from the end-on collected line-to-background ratio in dependence of the injector gas flow rates. Within the limits of 3% deviation, the results of the simulation and the experiments are in good agreement in the range of flow rates relevant for the analysis of relatively large droplets, i.e., 50 μm. The deviation increases for higher gas flow rates but stays below 6% for all flow rates studied. The velocity of the gas inside the coil region was determined by side-on analyte emission measurements with single monodisperse droplet introduction and by the analysis of the injector gas path lines in the simulation. In the downstream region significantly higher velocities were found than in the upstream region in both the simulation and the experiment. The quantitative values show good agreement in the downstream region. In the upstream region, deviations were found in the absolute values which can be attributed to the flow conditions in that region and because the methods used for velocity determination are not fully consistent. Eddy structures are found in the simulated flow lines. These affect strongly the way taken by the path lines of the injector gas and they can explain the very long analytical signals found in the experiments at low flow rates. Simulations were performed for different injector diameters in order to find conditions where good analyte transport and optimum signals can be expected. The results clearly show the existence of a transition flow rate which marks the lower limit for effective analyte transport conditions through the plasma. A rule-of-thumb equation was extracted from the results from which the transition flow rate can be estimated for different injector diameters and different injector gas compositions. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Washington, D.C. |
Editor |
|
Language |
|
Wos ![sorted by Wos field, descending order (down)](img/sort_desc.gif) |
000297946900013 |
Publication Date |
2011-07-29 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0003-2700;1520-6882; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
6.32 |
Times cited |
34 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 6.32; 2011 IF: 5.856 |
Call Number |
UA @ lucian @ c:irua:94001 |
Serial |
3009 |
Permanent link to this record |
|
|
|
Author |
De Bie, C.; Verheyde, B.; Martens, T.; van Dijk, J.; Paulussen, S.; Bogaerts, A. |
Title |
Fluid modeling of the conversion of methane into higher hydrocarbons in an atmospheric pressure dielectric barrier discharge |
Type |
A1 Journal article |
Year |
2011 |
Publication |
Plasma processes and polymers |
Abbreviated Journal |
Plasma Process Polym |
Volume |
8 |
Issue |
11 |
Pages |
1033-1058 |
Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
A one-dimensional fluid model for a dielectric barrier discharge in methane, used as a chemical reactor for gas conversion, is developed. The model describes the gas phase chemistry governing the conversion process of methane to higher hydrocarbons. The spatially averaged densities of the various plasma species as a function of time are discussed. Besides, the conversion of methane and the yields of the reaction products as a function of the residence time in the reactor are shown and compared with experimental data. Higher hydrocarbons (C2Hy and C3Hy) and hydrogen gas are typically found to be important reaction products. Furthermore, the main underlying reaction pathways are determined. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Weinheim |
Editor |
|
Language |
|
Wos ![sorted by Wos field, descending order (down)](img/sort_desc.gif) |
000297745500005 |
Publication Date |
2011-07-11 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1612-8850; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
2.846 |
Times cited |
70 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 2.846; 2011 IF: 2.468 |
Call Number |
UA @ lucian @ c:irua:92443 |
Serial |
1227 |
Permanent link to this record |
|
|
|
Author |
Neyts, E.C.; van Duin, A.C.T.; Bogaerts, A. |
Title |
Changing chirality during single-walled carbon nanotube growth : a reactive molecular dynamics/Monte Carlo study |
Type |
A1 Journal article |
Year |
2011 |
Publication |
Journal of the American Chemical Society |
Abbreviated Journal |
J Am Chem Soc |
Volume |
133 |
Issue |
43 |
Pages |
17225-17231 |
Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
The growth mechanism and chirality formation of a single-walled carbon nanotube (SWNT) on a surface-bound nickel nanocluster are investigated by hybrid reactive molecular dynamics/force-biased Monte Carlo simulations. The validity of the interatomic potential used, the so-called ReaxFF potential, for simulating catalytic SWNT growth is demonstrated. The SWNT growth process was found to be in agreement with previous studies and observed to proceed through a number of distinct steps, viz., the dissolution of carbon in the metallic particle, the surface segregation of carbon with the formation of aggregated carbon clusters on the surface, the formation of graphitic islands that grow into SWNT caps, and finally continued growth of the SWNT. Moreover, it is clearly illustrated in the present study that during the growth process, the carbon network is continuously restructured by a metal-mediated process, thereby healing many topological defects. It is also found that a cap can nucleate and disappear again, which was not observed in previous simulations. Encapsulation of the nanoparticle is observed to be prevented by the carbon network migrating as a whole over the cluster surface. Finally, for the first time, the chirality of the growing SWNT cap is observed to change from (11,0) over (9,3) to (7,7). It is demonstrated that this change in chirality is due to the metal-mediated restructuring process. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Washington, D.C. |
Editor |
|
Language |
|
Wos ![sorted by Wos field, descending order (down)](img/sort_desc.gif) |
000297380900026 |
Publication Date |
2011-10-06 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0002-7863;1520-5126; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
13.858 |
Times cited |
116 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 13.858; 2011 IF: 9.907 |
Call Number |
UA @ lucian @ c:irua:92043 |
Serial |
309 |
Permanent link to this record |
|
|
|
Author |
Mao, M.; Wang, Y.N.; Bogaerts, A. |
Title |
Numerical study of the plasma chemistry in inductively coupled SF6 and SF6/AR plasmas used for deep silicon etching applications |
Type |
A1 Journal article |
Year |
2011 |
Publication |
Journal of physics: D: applied physics |
Abbreviated Journal |
J Phys D Appl Phys |
Volume |
44 |
Issue |
43 |
Pages |
435202,1-435202,15 |
Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
A hybrid model, called the hybrid plasma equipment model, was used to study inductively coupled SF6 plasmas used for Si etching applications. The plasma properties such as number densities of electrons, positive and negative ions, and neutrals are calculated under typical etching conditions. The electron kinetics is analysed by means of the electron energy probability function. The plasma chemistry taking place in pure SF6 and in an Ar/SF6 mixture is also discussed, and finally the effect of the argon fraction on the plasma properties is investigated. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
London |
Editor |
|
Language |
|
Wos ![sorted by Wos field, descending order (down)](img/sort_desc.gif) |
000296591100004 |
Publication Date |
2011-10-13 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0022-3727;1361-6463; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
2.588 |
Times cited |
20 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 2.588; 2011 IF: 2.544 |
Call Number |
UA @ lucian @ c:irua:91754 |
Serial |
2409 |
Permanent link to this record |
|
|
|
Author |
Bultinck, E.; Bogaerts, A. |
Title |
Characterization of an Ar/O2 magnetron plasma by a multi-species Monte Carlo model |
Type |
A1 Journal article |
Year |
2011 |
Publication |
Plasma sources science and technology |
Abbreviated Journal |
Plasma Sources Sci T |
Volume |
20 |
Issue |
4 |
Pages |
045013-045013,12 |
Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
A combined Monte Carlo (MC)/analytical surface model is developed to study the plasma processes occurring during the reactive sputter deposition of TiOx thin films. This model describes the important plasma species with a MC approach (i.e. electrons, Ar+ ions, {\rm O}_2 |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
Institute of Physics |
Place of Publication |
Bristol |
Editor |
|
Language |
|
Wos ![sorted by Wos field, descending order (down)](img/sort_desc.gif) |
000295829800015 |
Publication Date |
2011-06-14 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0963-0252;1361-6595; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
3.302 |
Times cited |
7 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 3.302; 2011 IF: 2.521 |
Call Number |
UA @ lucian @ c:irua:89732 |
Serial |
316 |
Permanent link to this record |
|
|
|
Author |
Tinck, S.; Boullart, W.; Bogaerts, A. |
Title |
Modeling Cl2/O2/Ar inductively coupled plasmas used for silicon etching : effects of SiO2 chamber wall coating |
Type |
A1 Journal article |
Year |
2011 |
Publication |
Plasma sources science and technology |
Abbreviated Journal |
Plasma Sources Sci T |
Volume |
20 |
Issue |
4 |
Pages |
045012-045012,19 |
Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
In this paper, simulations are performed to gain a better insight into the properties of a Cl2/Ar plasma, with and without O2, during plasma etching of Si. Both plasma and surface properties are calculated in a self-consistent manner. Special attention is paid to the behavior of etch products coming from the wafer or the walls, and how the chamber walls can affect the plasma and the resulting etch process. Two modeling cases are considered. In the first case, the reactor walls are defined as clean (Al2O3), whereas in the second case a SiO2 coating is introduced on the reactor walls before the etching process, so that oxygen will be sputtered from the walls and introduced into the plasma. For this reason, a detailed reaction set is presented for a Cl2/O2/Ar plasma containing etched species, as well as an extensive reaction set for surface processes, including physical and chemical sputtering, chemical etching and deposition processes. Density and flux profiles of various species are presented for a better understanding of the bulk plasma during the etching process. Detailed information is also given on the composition of the surfaces at various locations of the reactor, on the etch products in the plasma and on the surface loss probabilities of the plasma species at the walls, with different compositions. It is found that in the clean chamber, walls are mostly chlorinated (Al2Cl3), with a thin layer of etch products residing on the wall. In the coated chamber, an oxy-chloride layer is grown on the walls for a few nanometers during the etching process. The Cl atom wall loss probability is found to decrease significantly in the coated chamber, hence increasing the etch rate. SiCl2, SiCl4 and SiCl3 are found to be the main etch products in the plasma, with the fraction of SiCl2 being always slightly higher. The simulation results compare well with experimental data available from the literature. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
Institute of Physics |
Place of Publication |
Bristol |
Editor |
|
Language |
|
Wos ![sorted by Wos field, descending order (down)](img/sort_desc.gif) |
000295829800014 |
Publication Date |
2011-06-14 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0963-0252;1361-6595; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
3.302 |
Times cited |
22 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 3.302; 2011 IF: 2.521 |
Call Number |
UA @ lucian @ c:irua:91045 |
Serial |
2141 |
Permanent link to this record |
|
|
|
Author |
Lindner, H.; Bogaerts, A. |
Title |
Multi-element model for the simulation of inductively coupled plasmas : effects of helium addition to the central gas stream |
Type |
A1 Journal article |
Year |
2011 |
Publication |
Spectrochimica acta: part B : atomic spectroscopy |
Abbreviated Journal |
Spectrochim Acta B |
Volume |
66 |
Issue |
6 |
Pages |
421-431 |
Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
A model for an atmospheric pressure inductively coupled plasma (ICP) is developed which allows rather easy extension to a variable number of species and ionisation degrees. This encompasses an easy calculation of transport parameters for mixtures, ionisation and heat capacity. The ICP is modeled in an axisymmetric geometry, taking into account the gas streaming into a flowing ambient gas. A mixture of argon and helium is applied in the injector gas stream as it is often done in laser ablation ICP spectrometry. The results show a strong influence of the added helium on the center of the ICP, which is important for chemical analysis. The length of the central channel is significantly increased and the temperature inside is significantly higher than in the case of pure argon. This means that higher gas volume flow rates can be applied by addition of helium compared to the use of pure argon. This has the advantage that the gas velocity in the transport system towards the ICP can be increased, which allows shorter washout-times. Consequently, shorter measurement times can be achieved, e.g. for spatial mapping analyses in laser ablation ICP spectrometry. Furthermore, the higher temperature and the longer effective plasma length will increase the maximum size of droplets or particles injected into the ICP that are completely evaporated at the detection site. Thus, we expect an increase of the analytical performance of the ICP by helium addition to the injector gas. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
Language |
|
Wos ![sorted by Wos field, descending order (down)](img/sort_desc.gif) |
000293488700003 |
Publication Date |
2011-04-20 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0584-8547; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
3.241 |
Times cited |
28 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 3.241; 2011 IF: 2.876 |
Call Number |
UA @ lucian @ c:irua:90190 |
Serial |
2209 |
Permanent link to this record |
|
|
|
Author |
Bogaerts, A.; Aghaei, M.; Autrique, D.; Lindner, H.; Chen, Z.; Wendelen, W. |
Title |
Computer simulations of laser ablation, plume expansion and plasma formation |
Type |
H1 Book chapter |
Year |
2011 |
Publication |
|
Abbreviated Journal |
|
Volume |
|
Issue |
|
Pages |
1-10 |
Keywords |
H1 Book chapter; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
|
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
Trans Tech |
Place of Publication |
Aedermannsdorf |
Editor |
|
Language |
|
Wos ![sorted by Wos field, descending order (down)](img/sort_desc.gif) |
000292658900001 |
Publication Date |
2011-04-20 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1662-8985; |
ISBN |
978-3-03785-081-7 |
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
|
Times cited |
8 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: NA |
Call Number |
UA @ lucian @ c:irua:88340 |
Serial |
470 |
Permanent link to this record |
|
|
|
Author |
Jehanathan, N.; Georgieva, V.; Saraiva, M.; Depla, D.; Bogaerts, A.; Van Tendeloo, G. |
Title |
The influence of Cr and Y on the micro structural evolution of Mg―Cr―O and Mg―Y―O thin films |
Type |
A1 Journal article |
Year |
2011 |
Publication |
Thin solid films : an international journal on the science and technology of thin and thick films |
Abbreviated Journal |
Thin Solid Films |
Volume |
519 |
Issue |
16 |
Pages |
5388-5396 |
Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT); Electron microscopy for materials research (EMAT) |
Abstract |
The compositional influence of Cr and Y on the microstructure of Mg―Cr―O, and Mg―Y―O films synthesized by reactive magnetron sputtering has been investigated by transmission electron microscopy, X-ray diffraction and molecular dynamics simulations. A decrease in crystallinity is observed in these films as the M (Cr or Y) content is increased. It is found that M forms a solid solution with MgO for metal ratios up to ~ 70% and ~ 50% for Cr and Y respectively. Above ~ 70% Cr metal ratio the Mg―Cr―O films are found to be completely amorphous. The Mg―Y―O films are composed of Mg(Y)O and Y2O3 nano crystallites, up to ~ 50% Y metal ratio. Above this ratio, only Y2O3 nano crystallites are found. The preferential < 111> MgO grain alignment is strongly affected by the increase in M content. For M metal ratios up to ~ 50%, there is a selective promotion of the < 100> MgO grain alignments and a decline in the < 111> grain alignments. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Lausanne |
Editor |
|
Language |
|
Wos ![sorted by Wos field, descending order (down)](img/sort_desc.gif) |
000292573500013 |
Publication Date |
2011-02-26 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0040-6090; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
1.879 |
Times cited |
4 |
Open Access |
|
Notes |
Iwt |
Approved |
Most recent IF: 1.879; 2011 IF: 1.890 |
Call Number |
UA @ lucian @ c:irua:89516 |
Serial |
1618 |
Permanent link to this record |
|
|
|
Author |
Philippaerts, A.; Goossens, S.; Vermandel, W.; Tromp, M.; Turner, S.; Geboers, J.; Van Tendeloo, G.; Jacobs, P.A.; Sels, B.F. |
Title |
Design of Ru-zeolites for hydrogen-free production of conjugated linoleic acid |
Type |
A1 Journal article |
Year |
2011 |
Publication |
Chemsuschem |
Abbreviated Journal |
Chemsuschem |
Volume |
4 |
Issue |
6 |
Pages |
757-767 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
While conjugated vegetable oils are currently used as additives in the drying agents of oils and paints, they are also attractive molecules for making bio-plastics. Moreover, conjugated oils will soon be accepted as nutritional additives for functional food products. While current manufacture of conjugated vegetable oils or conjugated linoleic acids (CLAs) uses a homogeneous base as isomerisation catalyst, a heterogeneous alternative is not available today. This contribution presents the direct production of CLAs over Ru supported on different zeolites, varying in topology (ZSM-5, BETA, Y), Si/Al ratio and countercation (H+, Na+, Cs+). Ru/Cs-USY, with a Si/Al ratio of 40, was identified as the most active and selective catalyst for isomerisation of methyl linoleate (cis-9,cis-12 (C18:2)) to CLA at 165 °C. Interestingly, no hydrogen pre-treatment of the catalyst or addition of hydrogen donors is required to achieve industrially relevant isomerisation productivities, namely, 0.7 g of CLA per litre of solvent per minute. Moreover, the biologically most active CLA isomers, namely, cis-9,trans-11, trans-10,cis-12 and trans-9,trans-11, were the main products, especially at low catalyst concentrations. Ex situ physicochemical characterisation with CO chemisorption, extended X-ray absorption fine structure measurements, transmission electron microscopy analysis, and temperature-programmed oxidation reveals the presence of highly dispersed RuO2 species in Ru/Cs-USY(40). |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Weinheim |
Editor |
|
Language |
|
Wos ![sorted by Wos field, descending order (down)](img/sort_desc.gif) |
000292214000009 |
Publication Date |
2011-04-20 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1864-5631; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
7.226 |
Times cited |
24 |
Open Access |
|
Notes |
Fwo |
Approved |
Most recent IF: 7.226; 2011 IF: 6.827 |
Call Number |
UA @ lucian @ c:irua:90352 |
Serial |
660 |
Permanent link to this record |
|
|
|
Author |
Tinck, S.; Bogaerts, A.; Shamiryan, D. |
Title |
Simultaneous etching and deposition processes during the etching of silicon with a Cl2/O2/Ar inductively coupled plasma |
Type |
A1 Journal article |
Year |
2011 |
Publication |
Plasma processes and polymers |
Abbreviated Journal |
Plasma Process Polym |
Volume |
8 |
Issue |
6 |
Pages |
490-499 |
Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
In this article, surface processes occurring during the etching of Si with a Cl2/O2/Ar plasma are investigated by means of experiments and modeling. Cl2-based plasmas are commonly used to etch silicon, while a small fraction of O2 is added to protect the sidewalls from lateral etching during the shallow trench isolation process. When the oxygen fraction exceeds a critical value, the wafer surface process changes from an etching regime to a deposition regime, drastically reducing the etch rate. This effect is commonly referred to as the etch stop phenomenon. To gain better understanding of this mechanism, the oxygen fraction is varied in the gas mixture and special attention is paid to the effects of oxygen and of the redeposition of non-volatile etched species on the overall etch/deposition process. It is found that, when the O2 flow is increased, the etch process changes from successful etching to the formation of a rough surface, and eventually to the actual growth of an oxide layer which completely blocks the etching of the underlying Si. The size of this etch stop island was found to increase as a function of oxygen flow, while its thickness was dependent on the amount of Si etched. This suggests that the growth of the oxide layer mainly depends on the redeposition of non-volatile etch products. The abrupt change in the etch rate as a function of oxygen fraction was not found back in the oxygen content of the plasma, suggesting the competitive nature between oxidation and chlorination at the wafer. Finally, the wafer and reactor wall compositions were investigated by modeling and it was found that the surface rapidly consisted mainly of SiO2 when the O2 flow was increased above about 15 sccm. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Weinheim |
Editor |
|
Language |
|
Wos ![sorted by Wos field, descending order (down)](img/sort_desc.gif) |
000292116800003 |
Publication Date |
2011-03-29 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1612-8850; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
2.846 |
Times cited |
5 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 2.846; 2011 IF: 2.468 |
Call Number |
UA @ lucian @ c:irua:90926 |
Serial |
3014 |
Permanent link to this record |
|
|
|
Author |
Georgieva, V.; Voter, A.F.; Bogaerts, A. |
Title |
Understanding the surface diffusion processes during magnetron sputter-deposition of complex oxide Mg-Al-O thin films |
Type |
A1 Journal article |
Year |
2011 |
Publication |
Crystal growth & design |
Abbreviated Journal |
Cryst Growth Des |
Volume |
11 |
Issue |
6 |
Pages |
2553-2558 |
Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
It is known that film structure may change dramatically with the extent of surface diffusion during the film growth process. In the present work, surface diffusion, induced thermally or activated by energetic impacts, is investigated theoretically under conditions appropriate for magnetron sputter-deposition of MgAlO thin films with varying stoichiometry. The distribution of surface diffusion energy barriers available to the system was determined for each stoichiometry, which allowed assessing in a qualitative way how much surface diffusion will take place on the time scale available between deposition events. The activation energy barriers increase with the Al concentration in the film, and therefore, the surface diffusion rates in the time frame of typical deposition rates drop, which can explain the decrease in crystallinity in the film structure and the transition to amorphous structure. The deposition process and the immediate surface diffusion enhanced by the energetic adatoms are simulated by means of a molecular dynamics model. The longer-time thermal surface diffusion and the energy landscape are studied by the temperature accelerated dynamics method, applied in an approximate way. The surface diffusion enhanced by the energetic impacts appears to be very important for the film structure in the low-temperature deposition regime. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos ![sorted by Wos field, descending order (down)](img/sort_desc.gif) |
000291074600068 |
Publication Date |
2011-04-11 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1528-7483;1528-7505; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
4.055 |
Times cited |
14 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 4.055; 2011 IF: 4.720 |
Call Number |
UA @ lucian @ c:irua:89566 |
Serial |
3806 |
Permanent link to this record |
|
|
|
Author |
Martens, J.A.; Thybaut, J.W.; Denayer, J.F.M.; Sree, S.P.; Aerts, A.; Reyniers, M.-F.; van Speybroeck, V.; Waroquier, M.; Buekenhoudt, A.; Vankelecom, I.; Buijs, W.; Persoons, J.; Baron, G.V.; Bals, S.; Van Tendeloo, G.; Marin, G.B.; Jacobs, P.A.; Kirschhock, C.E.A. |
Title |
Catalytic and molecular separation properties of Zeogrids and Zeotiles |
Type |
A1 Journal article |
Year |
2011 |
Publication |
Catalysis today |
Abbreviated Journal |
Catal Today |
Volume |
168 |
Issue |
1 |
Pages |
17-27 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
Zeogrids and Zeotiles are hierarchical materials built from assembled MFI zeolite precursor units. Permanent secondary porosity in these materials is obtained through self assembly of nanoparticles encountered in MFI zeolite synthesis in the presence of supramolecular templates. Hereon, the aggregated species are termed nanoslabs. Zeogrids are layered materials with lateral spacings between nanoslabs creating galleries qualifying as supermicropores. Zeotiles present a diversity of tridimensional nanoslab assemblies with mesopores. Zeotile-1, -4 and -6 are hexagonal mesostructures. Zeotile-1 has triangular and hexagonal channels; Zeotile-4 has hexagonal channels interconnected via slits. Zeotile-2 has a cubic structure with gyroid type mesoporosity. The behavior of Zeogrids and Zeotiles in adsorption, membrane and chromatographic separation and catalysis has been characterized and compared with zeolites and mesoporous materials derived from unstructured silica sources. Shape selectivity was detected via adsorption of n- and iso-alkanes. The mesoporosity of Zeotiles can be exploited in chromatographic separation of biomolecules. Zeotiles present attractive separation properties relevant to CO2 sequestration. Because of its facile synthesis procedure without hydrothermal steps Zeogrid is convenient for membrane synthesis. The performance of Zeogrid membrane in gas separation, nanofiltration and pervaporation is reported. In the Beckmann rearrangement of cyclohexanone oxime Zeogrids and Zeotiles display a catalytic activity characteristic of silicalite-1 zeolites. Introduction of acidity and redox catalytic activity can be achieved via incorporation of Al and Ti atoms in the nanoslabs during synthesis. Zeogrids are active in hydrocracking, catalytic cracking, alkylation and epoxidation reactions. Zeogrids and Zeotiles often behave differently from ordered mesoporous materials as well as from zeolites and present a valuable extension of the family of hierarchical silicate based materials. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Amsterdam |
Editor |
|
Language |
|
Wos ![sorted by Wos field, descending order (down)](img/sort_desc.gif) |
000291033300003 |
Publication Date |
2011-03-09 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0920-5861; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
4.636 |
Times cited |
13 |
Open Access |
|
Notes |
Fwo; Iap
Sbo |
Approved |
Most recent IF: 4.636; 2011 IF: 3.407 |
Call Number |
UA @ lucian @ c:irua:88647 |
Serial |
290 |
Permanent link to this record |
|
|
|
Author |
De Bie, C.; Martens, T.; van Dijk, J.; Paulussen, S.; Verheyde, B.; Corthals, S.; Bogaerts, A. |
Title |
Dielectric barrier discharges used for the conversion of greenhouse gases: modeling the plasma chemistry by fluid simulations |
Type |
A1 Journal article |
Year |
2011 |
Publication |
Plasma sources science and technology |
Abbreviated Journal |
Plasma Sources Sci T |
Volume |
20 |
Issue |
2 |
Pages |
024008,1-024008,11 |
Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
The conversion of methane to value-added chemicals and fuels is considered to be one of the challenges of the 21st century. In this paper we study, by means of fluid modeling, the conversion of methane to higher hydrocarbons or oxygenates by partial oxidation with CO2 or O2 in a dielectric barrier discharge. Sixty-nine different plasma species (electrons, ions, molecules, radicals) are included in the model, as well as a comprehensive set of chemical reactions. The calculation results presented in this paper include the conversion of the reactants and the yields of the reaction products as a function of residence time in the reactor, for different gas mixing ratios. Syngas (i.e. H2 + CO) and higher hydrocarbons (C2Hx) are typically found to be important reaction products. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
Institute of Physics |
Place of Publication |
Bristol |
Editor |
|
Language |
|
Wos ![sorted by Wos field, descending order (down)](img/sort_desc.gif) |
000290719900009 |
Publication Date |
2011-04-02 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0963-0252;1361-6595; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
3.302 |
Times cited |
38 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 3.302; 2011 IF: 2.521 |
Call Number |
UA @ lucian @ c:irua:87868 |
Serial |
689 |
Permanent link to this record |
|
|
|
Author |
Philippaerts, A.; Paulussen, S.; Breesch, A.; Turner, S.; Lebedev, O.I.; Van Tendeloo, G.; Sels, B.; Jacobs, P. |
Title |
Unprecedented shape selectivity in hydrogenation of triacylglycerol molecules with Pt/ZSM-5 zeolite |
Type |
A1 Journal article |
Year |
2011 |
Publication |
Angewandte Chemie: international edition in English |
Abbreviated Journal |
Angew Chem Int Edit |
Volume |
50 |
Issue |
17 |
Pages |
3947-3949 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
Well tuned: ZSM-5 with platinum nanoparticles preferably hydrogenates trans fatty acids over cis isomers in model triacylglycerols for geometric reasons. The central fatty acid chain reacts faster, pointing to pore mouth adsorption in a tuning fork conformation (see picture). This conformation induces stepwise hydrogenation, resulting in fast removal of the unstable central triene, while formation of saturated chains is limited. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Weinheim |
Editor |
|
Language |
|
Wos ![sorted by Wos field, descending order (down)](img/sort_desc.gif) |
000289514100025 |
Publication Date |
2011-03-18 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1433-7851; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
11.994 |
Times cited |
31 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 11.994; 2011 IF: 13.455 |
Call Number |
UA @ lucian @ c:irua:88381 |
Serial |
3814 |
Permanent link to this record |
|
|
|
Author |
Bogaerts, A.; Eckert, M.; Mao, M.; Neyts, E. |
Title |
Computer modelling of the plasma chemistry and plasma-based growth mechanisms for nanostructured materials |
Type |
A1 Journal article |
Year |
2011 |
Publication |
Journal of physics: D: applied physics |
Abbreviated Journal |
J Phys D Appl Phys |
Volume |
44 |
Issue |
17 |
Pages |
174030-174030,16 |
Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
In this review paper, an overview is given of different modelling efforts for plasmas used for the formation and growth of nanostructured materials. This includes both the plasma chemistry, providing information on the precursors for nanostructure formation, as well as the growth processes itself. We limit ourselves to carbon (and silicon) nanostructures. Examples of the plasma modelling comprise nanoparticle formation in silane and hydrocarbon plasmas, as well as the plasma chemistry giving rise to carbon nanostructure formation, such as (ultra)nanocrystalline diamond ((U)NCD) and carbon nanotubes (CNTs). The second part of the paper deals with the simulation of the (plasma-based) growth mechanisms of the same carbon nanostructures, i.e. (U)NCD and CNTs, both by mechanistic modelling and detailed atomistic simulations. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
London |
Editor |
|
Language |
|
Wos ![sorted by Wos field, descending order (down)](img/sort_desc.gif) |
000289512700030 |
Publication Date |
2011-04-15 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0022-3727;1361-6463; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
2.588 |
Times cited |
25 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 2.588; 2011 IF: 2.544 |
Call Number |
UA @ lucian @ c:irua:88364 |
Serial |
463 |
Permanent link to this record |
|
|
|
Author |
Yusupov, M.; Bultinck, E.; Depla, D.; Bogaerts, A. |
Title |
Elucidating the asymmetric behavior of the discharge in a dual magnetron sputter deposition system |
Type |
A1 Journal article |
Year |
2011 |
Publication |
Applied physics letters |
Abbreviated Journal |
Appl Phys Lett |
Volume |
98 |
Issue |
13 |
Pages |
131502-131502,3 |
Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
A magnetron discharge is characterized by drifts of the charged particles guiding center, caused by the magnetic field, in contrast to unmagnetized discharges. Because of these drifts, a pronounced asymmetry of the discharge can be observed in a dual magnetron setup. In this work, it is found that the shape of the discharge in a dual magnetron configuration depends on the magnetic field configuration. In a closed configuration, strong drifts were observed in one preferential direction, whereas in a mirror configuration the deflection of the discharge was not so pronounced. Our calculations confirm experimental observations. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
American Institute of Physics |
Place of Publication |
New York, N.Y. |
Editor |
|
Language |
|
Wos ![sorted by Wos field, descending order (down)](img/sort_desc.gif) |
000289153600017 |
Publication Date |
2011-04-01 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0003-6951; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
3.411 |
Times cited |
4 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 3.411; 2011 IF: 3.844 |
Call Number |
UA @ lucian @ c:irua:87867 |
Serial |
1026 |
Permanent link to this record |
|
|
|
Author |
Si, X.-J.; Zhao, S.-X.; Xu, X.; Bogaerts, A.; Wang, Y.-N. |
Title |
Fluid simulations of frequency effects on nonlinear harmonics in inductively coupled plasma |
Type |
A1 Journal article |
Year |
2011 |
Publication |
Physics of plasmas |
Abbreviated Journal |
Phys Plasmas |
Volume |
18 |
Issue |
3 |
Pages |
033504-033504,9 |
Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
A fluid model is self-consistently established to investigate the harmonic effects in an inductively coupled plasma, where the electromagnetic field is solved by the finite difference time domain technique. The spatiotemporal distribution of harmonic current density, harmonic potential, and other plasma quantities, such as radio frequency power deposition, plasma density, and electron temperature, have been investigated. Distinct differences in current density have been observed when calculated with and without Lorentz force, which indicates that the nonlinear Lorentz force plays an important role in the harmonic effects, especially at low frequencies. Moreover, the even harmonics are larger than the odd harmonics both in the current density and the potential. Finally, the dependence of various plasma quantities with and without the Lorentz force on various driving frequencies is also examined. It is shown that the deposited power density decreases and the depth of penetration increases slightly because of the Lorentz force. The electron density increases distinctly while the electron temperature remains almost the same when the Lorentz force is taken into account. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Woodbury, N.Y. |
Editor |
|
Language |
|
Wos ![sorted by Wos field, descending order (down)](img/sort_desc.gif) |
000289151900073 |
Publication Date |
2011-03-18 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1070-664X; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
2.115 |
Times cited |
7 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 2.115; 2011 IF: 2.147 |
Call Number |
UA @ lucian @ c:irua:87876 |
Serial |
1233 |
Permanent link to this record |
|
|
|
Author |
Yusupov, M.; Bultinck, E.; Depla, D.; Bogaerts, A. |
Title |
Behavior of electrons in a dual-magnetron sputter deposition system : a Monte Carlo model |
Type |
A1 Journal article |
Year |
2011 |
Publication |
New journal of physics |
Abbreviated Journal |
New J Phys |
Volume |
13 |
Issue |
|
Pages |
033018-033018,17 |
Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
A Monte Carlo model has been developed for investigating the electron behavior in a dual-magnetron sputter deposition system. To describe the three-dimensional (3D) geometry, different reference frames, i.e. a local and a global coordinate system, were used. In this study, the influence of both closed and mirror magnetic field configurations on the plasma properties is investigated. In the case of a closed magnetic field configuration, the calculated electron trajectories show that if an electron is emitted in (or near) the center of the cathode, where the influence of the magnetic field is low, it is able to travel from one magnetron to the other. On the other hand, when an electron is created at the race track area, it is more or less trapped in the strong magnetic field and cannot easily escape to the second magnetron region. In the case of a mirror magnetic field configuration, irrespective of where the electron is emitted from the cathode, it cannot travel from one magnetron to the other because the magnetic field lines guide the electron to the substrate. Moreover, the electron density and electron impact ionization rate have been calculated and studied in detail for both configurations. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Bristol |
Editor |
|
Language |
|
Wos ![sorted by Wos field, descending order (down)](img/sort_desc.gif) |
000289064600001 |
Publication Date |
2011-03-15 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1367-2630; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
3.786 |
Times cited |
12 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 3.786; 2011 IF: 4.177 |
Call Number |
UA @ lucian @ c:irua:87544 |
Serial |
224 |
Permanent link to this record |
|
|
|
Author |
Simon, P.; Bogaerts, A. |
Title |
Vibrational level population of nitrogen impurities in low-pressure argon glow discharges |
Type |
A1 Journal article |
Year |
2011 |
Publication |
Journal of analytical atomic spectrometry |
Abbreviated Journal |
J Anal Atom Spectrom |
Volume |
26 |
Issue |
4 |
Pages |
804-810 |
Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
The vibrational level populations of the electronic ground state of the nitrogen molecule have been calculated for typical glow discharge conditions in argonnitrogen mixtures with nitrogen concentrations between 0.1 and 1%. Stationary solutions of the master equations of the vibrational levels have been obtained using numerical methods. The main mechanisms responsible for the population and depopulation of the vibrational levels, and for the overall shape of the vibrational distribution function are pointed out. It has been found that vibrationvibration collisions play only a minor role and therefore the population of the vibrational levels is basically determined by the electron temperature. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
London |
Editor |
|
Language |
|
Wos ![sorted by Wos field, descending order (down)](img/sort_desc.gif) |
000288703300012 |
Publication Date |
2010-12-07 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0267-9477;1364-5544; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
3.379 |
Times cited |
6 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 3.379; 2011 IF: 3.220 |
Call Number |
UA @ lucian @ c:irua:87530 |
Serial |
3842 |
Permanent link to this record |
|
|
|
Author |
Eckert, M.; Mortet, V.; Zhang, L.; Neyts, E.; Verbeeck, J.; Haenen, ken; Bogaerts, A. |
Title |
Theoretical investigation of grain size tuning during prolonged bias-enhanced nucleation |
Type |
A1 Journal article |
Year |
2011 |
Publication |
Chemistry of materials |
Abbreviated Journal |
Chem Mater |
Volume |
23 |
Issue |
6 |
Pages |
1414-1423 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT); Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
In this paper, the effects of prolonged bias-enhanced nucleation (prolonged BEN) on the growth mechanisms of diamond are investigated by molecular dynamics (MD) and combined MD-Metropolis Monte Carlo (MD-MMC) simulations. First, cumulative impacts of CxHy+ and Hx+ on an a-C:H/nanodiamond composite were simulated; second, nonconsecutive impacts of the dominant ions were simulated in order to understand the observed phenomena in more detail. As stated in the existing literature, the growth of diamond structures during prolonged BEN is a process that takes place below the surface of the growing film. The investigation of the penetration behavior of CxHy+ and Hx+ species shows that the carbon-containing ions remain trapped within this amorphous phase where they dominate mechanisms like precipitation of sp3 carbon clusters. The H+ ions, however, penetrate into the crystalline phase at high bias voltages (>100 V), destroying the perfect diamond structure. The experimentally measured reduction of grain sizes at high bias voltage, reported in the literature, might thus be related to penetrating H+ ions. Furthermore, the CxHy+ ions are found to be the most efficient sputtering agents, preventing the build up of defective material. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Washington, D.C. |
Editor |
|
Language |
|
Wos ![sorted by Wos field, descending order (down)](img/sort_desc.gif) |
000288291400011 |
Publication Date |
2011-02-23 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0897-4756;1520-5002; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
9.466 |
Times cited |
9 |
Open Access |
|
Notes |
Iwt; Fwo; Esteem 026019; Iap |
Approved |
Most recent IF: 9.466; 2011 IF: 7.286 |
Call Number |
UA @ lucian @ c:irua:87642 |
Serial |
3605 |
Permanent link to this record |