|
Records |
|
Author |
Subban, C.V.; Ati, M.; Rousse, G.; Abakumov, A.M.; Van Tendeloo, G.; Janot, R.; Tarascon, J.-M. |
|
Title |
Preparation, structure, and electrochemistry of layered polyanionic hydroxysulfates : LiMSO4OH (M = Fe, Co, Mn) electrodes for Li-Ion batteries |
Type |
A1 Journal article |
|
Year |
2013 |
Publication |
Journal of the American Chemical Society |
Abbreviated Journal |
J Am Chem Soc |
|
Volume |
135 |
Issue |
9 |
Pages |
3653-3661 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
Abstract |
The Li-ion rechargeable battery, due to its high energy density, has driven remarkable advances in portable electronics. Moving toward more sustainable electrodes could make this technology even more attractive to large-volume applications. We present here a new family of 3d-metal hydroxysulfates of general formula LiMSO4OH (M = Fe, Co, and Mn) among which (i) LiFeSO4OH reversibly releases 0.7 Li+ at an average potential of 3.6 V vs Li+/Li-0, slightly higher than the potential of currently lauded LiFePO4 (3.45 V) electrode material, and (ii) LiCoSO4OH shows a redox activity at 4.7 V vs Li+/Li-0. Besides, these compounds can be easily made at temperatures near 200 degrees C via a synthesis process that enlists a new intermediate phase of composition M-3(SO4)(2)(OH)(2) (M = Fe, Co, Mn, and Ni), related to the mineral caminite. Structurally, we found that LiFeSO4OH is a layered phase unlike the previously reported 3.2 V tavorite LiFeSO4OH. This work should provide an impetus to experimentalists for designing better electrolytes to fully tap the capacity of high-voltage Co-based hydroxysulfates, and to theorists for providing a means to predict the electrochemical redox activity of two polymorphs. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
Washington, D.C. |
Editor |
|
|
Language |
|
Wos |
000315936700056 |
Publication Date |
2013-02-01 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
0002-7863;1520-5126; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
13.858 |
Times cited |
53 |
Open Access |
|
|
Notes |
|
Approved |
Most recent IF: 13.858; 2013 IF: 11.444 |
|
Call Number |
UA @ lucian @ c:irua:108283 |
Serial |
2708 |
Permanent link to this record |
|
|
|
|
Author |
Kuznetsov, A.S.; Lu, Y.-G.; Turner, S.; Shestakov, M.V.; Tikhomirov, V.K.; Kirilenko, D.; Verbeeck, J.; Baranov, A.N.; Moshchalkov, V.V. |
|
Title |
Preparation, structural and optical characterization of nanocrystalline ZnO doped with luminescent Ag-nanoclusters |
Type |
A1 Journal article |
|
Year |
2012 |
Publication |
Optical materials express |
Abbreviated Journal |
Opt Mater Express |
|
Volume |
2 |
Issue |
6 |
Pages |
723-734 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
Abstract |
Nanocrystalline ZnO doped with Ag-nanoclusters has been synthesized by a salt solid state reaction. Three overlapping broad emission bands due to the Ag nanoclusters have been detected at about 570, 750 and 900 nm. These emission bands are excited by an energy transfer from the exciton state of the ZnO host when pumped in the wavelength range from 250 to 400 nm. The 900 nm emission band shows characteristic orbital splitting into three components pointing out that the anisotropic crystalline wurtzite host of ZnO is responsible for this feature. Heat-treatment and temperature dependence studies confirm the origin of these emission bands. An energy level diagram for the emission process and a model for Ag nanoclusters sites are suggested. The emission of nanocrystalline ZnO doped with Ag nanoclusters may be applied for white light generation, displays driven by UV light, down-convertors for solar cells and luminescent lamps. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
|
Editor |
|
|
Language |
|
Wos |
000304953700004 |
Publication Date |
2012-04-30 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
2159-3930; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
2.591 |
Times cited |
|
Open Access |
|
|
Notes |
We are grateful to the Methusalem Funding of Flemish Government for the support of this work. Y.-G. L. and S. T. acknowledge funding from the Fund for Scientific Research Flanders (FWO) for a postdoctoral grant and under grant number G056810N. The microscope used in this study was partially financed by the Hercules Foundation. J.V. acknowledges funding from the European Research Council under the 7th Framework Program (FP7), ERC grant No246791 – COUNTATOMS and ERC Starting Grant 278510 VORTEX. The authors acknowledge the guidance of Prof. G. Van Tendeloo, EMAT Antwerpen University, in transmission electron microscopy study in this work. ECASJO_; |
Approved |
Most recent IF: 2.591; 2012 IF: 2.616 |
|
Call Number |
UA @ lucian @ c:irua:97709UA @ admin @ c:irua:97709 |
Serial |
2707 |
Permanent link to this record |
|
|
|
|
Author |
Sliem, M.A.; Turner, S.; Heeskens, D.; Kalidindi, S.B.; Van Tendeloo, G.; Muhler, M.; Fischer, R.A. |
|
Title |
Preparation, microstructure characterization and catalytic performance of Cu/ZnO and ZnO/Cu composite nanoparticles for liquid phase methanol synthesis |
Type |
A1 Journal article |
|
Year |
2012 |
Publication |
Physical chemistry, chemical physics |
Abbreviated Journal |
Phys Chem Chem Phys |
|
Volume |
14 |
Issue |
22 |
Pages |
8170-8178 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
Abstract |
Stearate@Cu/ZnO nanocomposite particles with molar ratios of ZnO ∶ Cu = 2 and 5 are synthesized by reduction of the metalorganic Cu precursor [Cu{(OCH(CH3)CH2N(CH3)2)}2] in the presence of stearate@ZnO nanoparticles. In the case of ZnO ∶ Cu = 5, high-angle annular dark field-scanning transmission electron microscopy (HAADF-STEM) combined with electron-energy-loss-spectroscopy (EELS) as well as attenuated total reflection Fourier transform infrared (ATR-IR) spectroscopy are used to localize the small amount of Cu deposited on the surface of 35 nm sized stearate@ZnO particles. For ZnO ∶ Cu = 2, the microstructure of the nanocomposites after catalytic activity testing is characterized by HAADF-STEM techniques. This reveals the construction of large Cu nanoparticles (2050 nm) decorated by small ZnO nanoparticles (35 nm). The catalytic activity of both composites for the synthesis of methanol from syn gas is evaluated. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
Cambridge |
Editor |
|
|
Language |
|
Wos |
000304102200033 |
Publication Date |
2012-04-16 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1463-9076;1463-9084; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
4.123 |
Times cited |
16 |
Open Access |
|
|
Notes |
Fwo |
Approved |
Most recent IF: 4.123; 2012 IF: 3.829 |
|
Call Number |
UA @ lucian @ c:irua:98377 |
Serial |
2702 |
Permanent link to this record |
|
|
|
|
Author |
Afanasov, I.M.; Morozov, V.A.; Kepman, A.V.; Ionov, S.G.; Seleznev, A.N.; Van Tendeloo, G.; Audeev, V.V. |
|
Title |
Preparation, electrical and thermal properties of new exfoliated graphite-based composites |
Type |
A1 Journal article |
|
Year |
2009 |
Publication |
Carbon |
Abbreviated Journal |
Carbon |
|
Volume |
47 |
Issue |
1 |
Pages |
263-270 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
Abstract |
Exfoliated graphite samples (EG) with different bulk densities were prepared by the exfoliation of expandable graphite under a thermal shock regime. As a conductive filler, EG has been incorporated successfully into the coal tar pitch matrix by mechanical mixing. The conducting behavior of the composite was interpreted based on the percolation theory. The percolation threshold of the EG/pitch conducting composites at room temperature was as low as 1.5 wt% and did not depend on the bulk density of the EG used. By means of thermogravimetry the improvement of thermal stability of the composites in comparison with pure pitches was detected. The phenomenon was ascribed to heat shielding effect of the EG particles evidenced by matrix-assisted laser desorption/ionization mass spectrometry. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
|
Language |
|
Wos |
000262143500032 |
Publication Date |
2008-10-14 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
0008-6223; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
6.337 |
Times cited |
42 |
Open Access |
|
|
Notes |
Iap-Vi |
Approved |
Most recent IF: 6.337; 2009 IF: 4.504 |
|
Call Number |
UA @ lucian @ c:irua:75767 |
Serial |
2701 |
Permanent link to this record |
|
|
|
|
Author |
Parsons, T.G.; Hadermann, J.; Halasyamani, P.S.; Hayward, M.A. |
|
Title |
Preparation of the noncentrosymmetric ferrimagnetic phase La0.9Ba0.1Mn0.96O2.43 by topochemical reduction |
Type |
A1 Journal article |
|
Year |
2020 |
Publication |
Journal Of Solid State Chemistry |
Abbreviated Journal |
J Solid State Chem |
|
Volume |
287 |
Issue |
|
Pages |
121356-121357 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
Abstract |
Topochemical reduction of La0.9Ba0.1MnO3 with NaH at 225 degrees C yields the brownmillerite phase La0.9Ba0.1MnO2.5. However, reduction with CaH2 at 435 degrees C results in the formation of La0.9Ba0.1Mn0.96O2.43 via the deintercalation of both oxide anions and manganese cations from the parent perovskite phase. Electron and neutron diffraction data reveal La0.9Ba0.1Mn0.96O2.43 adopts a complex noncentrosymmetric structure, described in space group I23, confirmed by SHG measurements. Low-temperature neutron diffraction data reveal La0.9Ba0.1Mn0.96O2.43 adopts an ordered magnetic structure in which all the nearest neighbor interactions are antiferromagnetic. However, the presence of ordered manganese cation-vacancies results in a net ferrimagnetic structure with net saturated moment of 0.157(2) mu B per manganese center. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
|
Editor |
|
|
Language |
|
Wos |
000533632700029 |
Publication Date |
2020-04-05 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
0022-4596 |
ISBN |
|
Additional Links |
UA library record; WoS full record |
|
Impact Factor |
3.3 |
Times cited |
|
Open Access |
Not_Open_Access |
|
Notes |
; We thank the EPSRC for funding this work and E. Suard for assisting with the collection of the neutron powder diffraction data. PSH thanks the Welch Foundation (Grant E-1457) for support. ; |
Approved |
Most recent IF: 3.3; 2020 IF: 2.299 |
|
Call Number |
UA @ admin @ c:irua:169450 |
Serial |
6583 |
Permanent link to this record |
|
|
|
|
Author |
Peng, L.; Philippaerts, A.; Ke, X.; van Noyen, J.; de Cleppel, F.; Van Tendeloo, G.; Jacobs, P.A.; Sels, B.F. |
|
Title |
Preparation of sulfonated ordered mesoporous carbon and its use for the esterification of fatty acids |
Type |
A1 Journal article |
|
Year |
2010 |
Publication |
Catalysis today |
Abbreviated Journal |
Catal Today |
|
Volume |
150 |
Issue |
1/2 |
Pages |
140-146 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
Abstract |
Mesoporous carbon, which can be replicated from mesoporous silica and whose surface is hydrophobic, can be an ideal catalyst for the esterification of fatty acids. Here we report an easy and low cost way to prepare sulfonic acid group-functionalized mesoporous carbon. A sample of calcined mesoporous silica SBA-15 was added to an aqueous sucrose solution followed by drying and calcination at different temperatures. In contrast to existing procedures, the obtained hybrid Si/C material was then first sulfonated in H2SO4, before the final removal of the silica template in order to stabilize the porous structure towards the liquid phase sulfonation treatment. Thus the silicacarbon composites, instead of the mesoporous carbon, were successfully sulfonated to introduce SO3H groups, while keeping the ordered mesoporous structure intact. The influence of carbonization temperature was investigated, suggesting an optimum temperature of 873 K. The SO3H group-functionalized mesoporous carbon, denoted as CMK-3-873-SO3H, was characterized by means of XRD, N2 physisorption, SEM, FT-IR, elemental analysis and TEM. It followed that a uniform mesoporous carbon was obtained with an average pore size of 3.89 nm, a specific surface of 807 m2/g and a SO3H group loading of 0.39 meq/g of dry material. Compared with other solid acid catalysts, the resulting material shows enhanced activity in the acid-catalyzed esterification of oleic acid with methanol, and can be used repeatedly. The increased catalytic performance is attributed to the hydrophobic surface and larger pore size of the new catalyst. It can effectively accommodate long chain fatty acids and reject formed water, making the active sites easily accessible. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
Amsterdam |
Editor |
|
|
Language |
|
Wos |
000275566700024 |
Publication Date |
2009-09-04 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
0920-5861; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
4.636 |
Times cited |
132 |
Open Access |
|
|
Notes |
|
Approved |
Most recent IF: 4.636; 2010 IF: 2.993 |
|
Call Number |
UA @ lucian @ c:irua:81739 |
Serial |
2706 |
Permanent link to this record |
|
|
|
|
Author |
Ahonen, P.P.; Kauppinen, E.I.; Joubert, J.C.; Deschanvres, J.L.; Van Tendeloo, G. |
|
Title |
Preparation of nanocrystalline titania powder via aerosol pyrolysis of titanium tetrabutoxide |
Type |
A1 Journal article |
|
Year |
1999 |
Publication |
Journal of materials research |
Abbreviated Journal |
J Mater Res |
|
Volume |
14 |
Issue |
10 |
Pages |
3938-3948 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
Abstract |
Nanocrystalline titanium dioxide was prepared via aerosol pyrolysis of titanium alkoxide precursor at 200-580 degrees C in air and in nitrogen atmospheres. Powders were characterized by x-ray diffraction, thermogravimetric analysis, Brunauer-Emmett-Teller analysis, scanning electron microscopy, transmission electron microscopy, energy dispersive spectroscopy, x-ray fluorescence, Raman and infrared spectroscopy, and Berner-type low-pressure impactor. The anatase phase transition was initiated at 500 degrees C in nitrogen and at 580 degrees C in air. Under other conditions amorphous powders were observed and transformed to nanocrystalline TiO2 via thermal postannealing. In air, smooth and spherical particles with 2-4-mu m diameter were formed with an as-expected tendency to convert to rutile in the thermal postannealings. In nitrogen, a fraction of the titanium tetrabutoxide precursor evaporated and formed ultrafine particles via the gas-to-particle conversion. At 500 degrees C thermally stable anatase phase was formed in nitrogen. A specific surface area as high as 280 m(2) g(-1) was observed for an as-prepared powder. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
New York, N.Y. |
Editor |
|
|
Language |
|
Wos |
000083163700019 |
Publication Date |
2008-03-06 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
0884-2914;2044-5326; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
1.673 |
Times cited |
38 |
Open Access |
|
|
Notes |
|
Approved |
Most recent IF: 1.673; 1999 IF: 1.574 |
|
Call Number |
UA @ lucian @ c:irua:103485 |
Serial |
2705 |
Permanent link to this record |
|
|
|
|
Author |
Ahonen, P.P.; Kauppinen, E.I.; Deschanvres, J.L.; Joubert, J.C.; Van Tendeloo, G. |
|
Title |
Preparation of nanocrystalline titania powder by aerosol pyrolysis of titanium alkoxide |
Type |
P1 Proceeding |
|
Year |
1998 |
Publication |
Materials Research Society symposium proceedings |
Abbreviated Journal |
|
|
Volume |
520 |
Issue |
|
Pages |
109-114 |
|
Keywords |
P1 Proceeding; Electron microscopy for materials research (EMAT) |
|
Abstract |
|
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
Wuhan |
Editor |
|
|
Language |
|
Wos |
000075966500015 |
Publication Date |
0000-00-00 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
0272-9172 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
|
Times cited |
2 |
Open Access |
|
|
Notes |
|
Approved |
Most recent IF: NA |
|
Call Number |
UA @ lucian @ c:irua:25681 |
Serial |
2704 |
Permanent link to this record |
|
|
|
|
Author |
Liu, S.; Rao, J.; Sui, X.; Cool, P.; Vansant, E.F.; Van Tendeloo, G.; Cheng, X. |
|
Title |
Preparation of hollow silica spheres with different mesostructures |
Type |
A1 Journal article |
|
Year |
2008 |
Publication |
Journal of non-crystalline solids |
Abbreviated Journal |
J Non-Cryst Solids |
|
Volume |
354 |
Issue |
10/11 |
Pages |
826-830 |
|
Keywords |
A1 Journal article; Laboratory of adsorption and catalysis (LADCA); Electron microscopy for materials research (EMAT) |
|
Abstract |
Hollow silica spheres were quickly synthesized by an octylamine (OA) templating method using tetraethyl orthosilicate (TEOS) as the silica source. N2-sorption results indicate that the hollow spheres have high surface areas and pore volumes. XRD and TEM measurements reveal that the structure of the hollow spheres depends on the amount of TEOS used in the synthesis. When low amount of TEOS is added, the template-containing precursor spheres depict an XRD pattern with two peaks, which can be indexed to a lamellar phase. After the removal of the template, the obtained hollow spheres show no diffraction peaks in the XRD pattern, suggesting that the nanopores in the silica shells are disordered. If increasing the amount of TEOS, either the uncalcined or the calcined sample gives an XRD pattern with a single diffraction peak. The mesostructure of these hollow silica spheres is typically as HMS materials. TGA analyses suggest that the interaction between the silica species and surfactant is stronger in the latter case. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
Amsterdam |
Editor |
|
|
Language |
|
Wos |
000253216700003 |
Publication Date |
2007-09-17 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
0022-3093; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
2.124 |
Times cited |
26 |
Open Access |
|
|
Notes |
Gao |
Approved |
Most recent IF: 2.124; 2008 IF: 1.449 |
|
Call Number |
UA @ lucian @ c:irua:72018 |
Serial |
2703 |
Permanent link to this record |
|
|
|
|
Author |
Kalesaki, E.; Boneschanscher, M.P.; Geuchies, J.J.; Delerue, C.; Morais Smith, C.; Evers, W.H.; Allan, G.; Altantzis, T.; Bals, S.; Vanmaekelbergh, D. |
|
Title |
Preparation and study of 2-D semiconductors with Dirac type bands due to the honeycomb nanogeometry |
Type |
P1 Proceeding |
|
Year |
2014 |
Publication |
Proceedings of the Society of Photo-optical Instrumentation Engineers
T2 – Proceedings of SPIE |
Abbreviated Journal |
|
|
Volume |
8981 |
Issue |
|
Pages |
898107-898107 |
|
Keywords |
P1 Proceeding; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
|
Abstract |
The interest in 2-dimensional systems with a honeycomb lattice and related Dirac-type electronic bands has exceeded the prototype graphene1. Currently, 2-dimensional atomic2,3 and nanoscale4-8 systems are extensively investigated in the search for materials with novel electronic properties that can be tailored by geometry. The immediate question that arises is how to fabricate 2-D semiconductors that have a honeycomb nanogeometry, and as a consequence of that, display a Dirac-type band structure? Here, we show that atomically coherent honeycomb superlattices of rocksalt (PbSe, PbTe) and zincblende (CdSe, CdTe) semiconductors can be obtained by nanocrystal self-assembly and facet-to-facet atomic bonding, and subsequent cation exchange. We present a extended structural analysis of atomically coherent 2-D honeycomb structures that were recently obtained with self-assembly and facet-to-facet bonding9. We show that this process may in principle lead to three different types of honeycomb structures, one with a graphene type-, and two others with a silicene-type structure. Using TEM, electron diffraction, STM and GISAXS it is convincingly shown that the structures are from the silicene-type. In the second part of this work, we describe the electronic structure of graphene-type and silicene type honeycomb semiconductors. We present the results of advanced electronic structure calculations using the sp3d5s* atomistic tight-binding method10. For simplicity, we focus on semiconductors with a simple and single conduction band for the native bulk semiconductor. When the 3-D geometry is changed into 2-D honeycomb, a conduction band structure transformation to two types of Dirac cones, one for S- and one for P-orbitals, is observed. The width of the bands depends on the honeycomb period and the coupling between the nanocrystals. Furthermore, there is a dispersionless P-orbital band, which also forms a landmark of the honeycomb structure. The effects of considerable intrinsic spin-orbit coupling are briefly considered. For heavy-element compounds such as CdTe, strong intrinsic spin-‐orbit coupling opens a non-trivial gap at the P-orbital Dirac point, leading to a quantum Spin Hall effect10-12. Our work shows that well known semiconductor crystals, known for centuries, can lead to systems with entirely new electronic properties, by the simple action of nanogeometry. It can be foreseen that such structures will play a key role in future opto-electronic applications, provided that they can be fabricated in a straightforward way. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
|
Editor |
|
|
Language |
|
Wos |
000336040600004 |
Publication Date |
2014-03-07 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
|
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
|
Times cited |
2 |
Open Access |
OpenAccess |
|
Notes |
This work has been supported by funding of the French National Research Agency [ANR, (ANR-‐09-‐BLAN-‐0421-‐01)], NWO and the Dutch organization FOM [Programs “Control over Functional Nanoparticle Solids” (FNPS) and “Designing Dirac Carriers in Semiconductors” |
Approved |
Most recent IF: NA |
|
Call Number |
c:irua:131912 |
Serial |
4039 |
Permanent link to this record |
|
|
|
|
Author |
Du, G.; Van Tendeloo, G. |
|
Title |
Preparation and structure analysis of Gd(OH)3 nanorods |
Type |
A1 Journal article |
|
Year |
2005 |
Publication |
Nanotechnology |
Abbreviated Journal |
Nanotechnology |
|
Volume |
16 |
Issue |
4 |
Pages |
595-597 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
Abstract |
|
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
Bristol |
Editor |
|
|
Language |
|
Wos |
000228949300052 |
Publication Date |
2005-03-02 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
0957-4484;1361-6528; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
3.44 |
Times cited |
28 |
Open Access |
|
|
Notes |
Iap V-1 |
Approved |
Most recent IF: 3.44; 2005 IF: 2.993 |
|
Call Number |
UA @ lucian @ c:irua:59057 |
Serial |
2700 |
Permanent link to this record |
|
|
|
|
Author |
Lorenz, H.; Zhao, Q.; Turner, S.; Lebedev, O.I.; Van Tendeloo, G.; Klötzer, B.; Rameshan, C.; Penner, S. |
|
Title |
Preparation and structural characterization of SnO2 and GeO2 methanol steam reforming thin film model catalysts by (HR)TEM |
Type |
A1 Journal article |
|
Year |
2010 |
Publication |
Materials chemistry and physics |
Abbreviated Journal |
Mater Chem Phys |
|
Volume |
122 |
Issue |
2/3 |
Pages |
623-629 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
Abstract |
Structure, morphology and composition of different tin oxide and germanium oxide thin film catalysts for the methanol steam reforming (MSR) reaction have been studied by a combination of (high-resolution) transmission electron microscopy, selected area electron diffraction, dark-field imaging and electron energy-loss spectroscopy. Deposition of the thin films on NaCl(0 0 1) cleavage faces has been carried out by thermal evaporation of the respective SnO2 and GeO2 powders in varying oxygen partial pressures and at different substrate temperatures. Preparation of tin oxide films in high oxygen pressures (10−1 Pa) exclusively resulted in SnO phases, at and above 473 K substrate temperature epitaxial growth of SnO on NaCl(0 0 1) leads to well-ordered films. For lower oxygen partial pressures (10−3 to 10−2 Pa), mixtures of SnO and β-Sn are obtained. Well-ordered SnO2 films, as verified by electron diffraction patterns and energy-loss spectra, are only obtained after post-oxidation of SnO films at temperatures T ≥ 673 K in 105 Pa O2. Preparation of GeOx films inevitably results in amorphous films with a composition close to GeO2, which cannot be crystallized by annealing treatments in oxygen or hydrogen at temperatures comparable to SnO/SnO2. Similarities and differences to neighbouring oxides relevant for selective MSR in the third group of the periodic system (In2O3 and Ga2O3) are also discussed with the aim of cross-correlation in formation of nanomaterials, and ultimately, also catalytic properties. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
Lausanne |
Editor |
|
|
Language |
|
Wos |
000278637900054 |
Publication Date |
2010-04-18 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
0254-0584; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
2.084 |
Times cited |
15 |
Open Access |
|
|
Notes |
Esteem 026019 |
Approved |
Most recent IF: 2.084; 2010 IF: 2.356 |
|
Call Number |
UA @ lucian @ c:irua:83099 |
Serial |
2699 |
Permanent link to this record |
|
|
|
|
Author |
Tikhomirov, V.K.; Rodriguez, V.D.; Kutznetsov, D.; Kirilenko, D.; Van Tendeloo, G.; Moshchalkov, V.V. |
|
Title |
Preparation and luminescence of bulk oxyfluoride glasses doped with Ag nanoclusters |
Type |
A1 Journal article |
|
Year |
2010 |
Publication |
Optics express |
Abbreviated Journal |
Opt Express |
|
Volume |
18 |
Issue |
21 |
Pages |
22032-22040 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
Abstract |
Bulk oxyfluoride glasses doped with Ag nanoclusters have been prepared using the melt quenching technique. When pumped in the absorption band of Ag nanoclusters between 300 to 500 nm, these glasses emit a very broad luminescence band covering all the visible range with a weak tail extending into the near infrared. The maximum of the luminescence band and its color shifts to the blue with a shortening of the excitation wavelength and an increasing ratio of oxide to fluoride components, resulting in white color luminescence at a particular ratio of oxide to fluoride; with a quantum yield above 20%. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
|
Editor |
|
|
Language |
|
Wos |
000283686500057 |
Publication Date |
2010-10-04 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1094-4087; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
3.307 |
Times cited |
74 |
Open Access |
|
|
Notes |
Methusalem |
Approved |
Most recent IF: 3.307; 2010 IF: 3.753 |
|
Call Number |
UA @ lucian @ c:irua:85802 |
Serial |
2698 |
Permanent link to this record |
|
|
|
|
Author |
Tancret, F.; Monot, I.; Laffez, P.; Van Tendeloo, G.; Desgardin, G. |
|
Title |
Preparation and characterization of melt textured NdBa2Cu3O7- bulk superconducting ceramics |
Type |
A1 Journal article |
|
Year |
1998 |
Publication |
European physical journal: applied physics |
Abbreviated Journal |
Eur Phys J-Appl Phys |
|
Volume |
1 |
Issue |
|
Pages |
185-190 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
Abstract |
|
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
Paris |
Editor |
|
|
Language |
|
Wos |
000073229800009 |
Publication Date |
2003-06-20 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1286-0042;1286-0050; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
0.684 |
Times cited |
2 |
Open Access |
|
|
Notes |
|
Approved |
Most recent IF: 0.684; 1998 IF: NA |
|
Call Number |
UA @ lucian @ c:irua:25690 |
Serial |
2697 |
Permanent link to this record |
|
|
|
|
Author |
Somsen, C.; Wassermann, E.F.; Kästner, J.; Schryvers, D. |
|
Title |
Precursor phenomena in a quenched and aged Ni52Ti48 shape memory alloy |
Type |
A1 Journal article |
|
Year |
2003 |
Publication |
Journal de physique: 4
T2 – 10th International Conference on Martensitic Transformations, JUN 10-14, 2002, ESPOO, FINLAND |
Abbreviated Journal |
J Phys Iv |
|
Volume |
112 |
Issue |
Part 2 |
Pages |
777-780 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
Abstract |
We measured the electrical resistivity R(T) and specific heat C-p(T) between room temperature (RT) and 4.2 K as well as the microstructure by transmission electron microscopy (TEM) of a Ni-52 Ti-48 SMA quenched from 1000degreesC (B2-Phase range) to RT and then annealed for 1h at T=380degreesC, 550degreesC and 650degreesC. In the “as quenched” and the “650degreesC annealed” state no martensitic transformations (MT's) occur. The diffraction patterns show faint reflections originating from coherent Ni4Ti3 precipitates in an early state of formation. Additional reflections of the type 1/2 <110>, 1/2 <111> and 1/3 <110> result from various lattice displacement waves, which are precursors of the MT's to the B19' and R-phase, respectively. Indeed, high resolution TEM micrographs of the [001] zone of the “as quenched” sample reveal transverse 1/2 <110> <110> lattice displacement waves, precursors of the B19' martensite. The coherent Ni4Ti3 precipitates, homogeneously distributed on a small length scale, binder the MT's in the “as quenched” and the “650degreesC annealed” state, and thus only the precursors appear. When annealed at T=380degreesC, however, coherent Ni4Ti3 precipitates with a length of 10nm are clearly visible in TEM. These precipitates trigger the NIT from the B2 to the R-phase on cooling, as evidenced also by anomalies in R(T) and C-p(T). Annealing at T-550degreesC leads to the well known two step MT's from the B2 to the R-phase and then into the B19'-phase. These martensitic transitions are clearly seen as additional peaks in the specific heat and anomalies in the resistance, while the “as quenched” and 650degreesC annealed samples show weak features in R(T) and C-p(T). |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
Les Ulis |
Editor |
|
|
Language |
|
Wos |
000186503400036 |
Publication Date |
2008-08-19 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1155-4339; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
|
Times cited |
2 |
Open Access |
|
|
Notes |
|
Approved |
Most recent IF: NA |
|
Call Number |
UA @ lucian @ c:irua:102791 |
Serial |
2694 |
Permanent link to this record |
|
|
|
|
Author |
Wang, A.; Van Aert, S.; Goos, P.; van Dyck, D. |
|
Title |
Precision of three-dimensional atomic scale measurements from HRTEM images : what are the limits? |
Type |
A1 Journal article |
|
Year |
2012 |
Publication |
Ultramicroscopy |
Abbreviated Journal |
Ultramicroscopy |
|
Volume |
114 |
Issue |
|
Pages |
20-30 |
|
Keywords |
A1 Journal article; Engineering Management (ENM); Electron microscopy for materials research (EMAT); Vision lab |
|
Abstract |
In this paper, we investigate to what extent high resolution transmission electron microscopy images can be used to measure the mass, in terms of thickness, and surface profile, corresponding to the defocus offset, of an object at the atomic scale. Therefore, we derive an expression for the statistical precision with which these object parameters can be estimated in a quantitative analysis. Evaluating this expression as a function of the microscope settings allows us to derive the optimal microscope design. Acquiring three-dimensional structure information in terms of thickness turns out to be much more difficult than obtaining two-dimensional information on the projected atom column positions. The attainable precision is found to be more strongly affected by processes influencing the image contrast, such as phonon scattering, than by the specific choice of microscope settings. For a realistic incident electron dose, it is expected that atom columns can be distinguished with single atom sensitivity up to a thickness of the order of the extinction distance. A comparable thickness limit is determined to measure surface steps of one atom. An increase of the electron dose shifts the limiting thickness upward due to an increase in the signal-to-noise ratio. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
Amsterdam |
Editor |
|
|
Language |
|
Wos |
000301954300003 |
Publication Date |
2012-01-06 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
0304-3991; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
2.843 |
Times cited |
5 |
Open Access |
|
|
Notes |
Fwo |
Approved |
Most recent IF: 2.843; 2012 IF: 2.470 |
|
Call Number |
UA @ lucian @ c:irua:94116 |
Serial |
2692 |
Permanent link to this record |
|
|
|
|
Author |
Akamine, H.; Mitsuhara, M.; Nishida, M.; Samaee, V.; Schryvers, D.; Tsukamoto, G.; Kunieda, T.; Fujii, H. |
|
Title |
Precipitation behaviors in Ti-2.3 Wt Pct Cu alloy during isothermal and two-step aging |
Type |
A1 Journal article |
|
Year |
2021 |
Publication |
Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science |
Abbreviated Journal |
Metall Mater Trans A |
|
Volume |
52 |
Issue |
|
Pages |
2760-2772 |
|
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
|
Abstract |
Time evolution of precipitates related to age-hardening in Ti-2.3 wt pct Cu alloys was investigated by electron microscopy. In isothermal aging at 723 K, the hardness increases continuously owing to precipitation strengthening, whereas in two-step aging where the aging temperature is switched from 673 K to 873 K after 100 hours, the hardness is found to drastically drop after the aging temperature switches. In isothermal aging, metastable and stable precipitates are independently nucleated, whereas characteristic V-shaped clusters of precipitates are observed during the two-step aging. It is revealed by atomic-scale observations that the V-shaped clusters are composed of metastable and stable precipitates and each type of precipitate has a different orientation relationship with the alpha phase: (10 (3) over bar)//(0001)(alpha) and [0 (1) over bar0]//respectively. The drop in hardness during two-step aging can be explained by a synergistic effect of decreased precipitation strengthening and solid solution strengthening. (C) The Minerals, Metals & Materials Society and ASM International 2021 |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
|
Editor |
|
|
Language |
|
Wos |
000644823000001 |
Publication Date |
2021-04-27 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1073-5623 |
ISBN |
|
Additional Links |
UA library record; WoS full record |
|
Impact Factor |
1.874 |
Times cited |
|
Open Access |
OpenAccess |
|
Notes |
|
Approved |
Most recent IF: 1.874 |
|
Call Number |
UA @ admin @ c:irua:178222 |
Serial |
6786 |
Permanent link to this record |
|
|
|
|
Author |
Takeda, M.; Shinohara, G.; Yamada, H.; Yoshida, S.; van Landuyt, J.; Hashimoto, H. |
|
Title |
Precipitation behavior in Cu-Co alloy |
Type |
P3 Proceeding |
|
Year |
1998 |
Publication |
|
Abbreviated Journal |
|
|
Volume |
|
Issue |
|
Pages |
205-206 |
|
Keywords |
P3 Proceeding; Electron microscopy for materials research (EMAT) |
|
Abstract |
|
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
Kyoto |
Editor |
|
|
Language |
|
Wos |
|
Publication Date |
0000-00-00 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
|
ISBN |
|
Additional Links |
UA library record |
|
Impact Factor |
|
Times cited |
|
Open Access |
|
|
Notes |
|
Approved |
Most recent IF: NA |
|
Call Number |
UA @ lucian @ c:irua:29682 |
Serial |
2689 |
Permanent link to this record |
|
|
|
|
Author |
Lu, Q. |
|
Title |
Precipitation behavior and heat resistance properties of Al-Cu-Mg-Ag-(Si) alloy |
Type |
Doctoral thesis |
|
Year |
2024 |
Publication |
|
Abbreviated Journal |
|
|
Volume |
|
Issue |
|
Pages |
VIII, 212 p. |
|
Keywords |
Doctoral thesis; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
|
Abstract |
With the rapid increase in the speed of new-generation aerospace vehicles, conventional heat-resistant aluminum alloys cannot meet the long-term service of the equipment. Therefore, the development of new high-strength heat-resistant aluminum alloys is of great strategic for the sustainable and high-quality development of industries. Al-Cu-Mg-Ag alloy is an age-hardenable heat-resistant aluminum alloy and has high strength and heat resistance. The addition of alloying elements such as Si and Sc to Al-Cu-Mg-Ag alloy introduces a competitive relationship among the σ-Al5Cu6Mg2, θ′-Al2Cu, and Ω phases. Therefore, a systematic investigation of precipitation behavior and heat resistance of Al-Cu-Mg-Ag-(Si) is essential for guiding the design of high-strength heat-resistant aluminum alloys. Combined characterization testing methods such as scanning electron microscopy, transmission electron microscopy, atom probe tomography, microhardness testing, and tensile testing with simulation calculation methods such as calculation of phase diagram, first-principles calculations, and Ab initio molecular dynamics, the effects of heat treatment processes and element content on the precipitation behavior, mechanical properties, and heat resistance of Al-Cu-Mg-Ag-(Si) alloys were systematically investigated. Furthermore, a multiple interface segregation structure was constructed at the θ′/Al interface, and a new Al-Cu-Mg-Ag-Si-Sc alloy with synergistically improved strength and heat resistance was developed. The main conclusions are as follows: (1) Based on the Kampmann-Wagner-Numerical theory, the relationship between the coarsening rate of the Ω phase and the aging process was analyzed, revealing for the first time that the critical size of Ω phase ( ) under thermal exposure temperature was the key factor determining the coarsening rate of Ω phase during long time thermal exposure heat treatment. After artificial ageing, when the size of Ω phase was smaller than the critical size , the dissolution of smaller Ω phase leaded to a rapid decrease in the number density of Ω phases, thereby reducing the heat resistance of the alloy. When the size of Ω phase was greater than or equal to the critical size , the coarsening rate of Ω phase was consistent, but a larger initial size would result in a larger final size after long-term thermal exposure. Therefore, the closer the size of Ω phase in the alloy is to the critical size under heat exposure temperature, the better the heat resistance of the alloy. (2) A concept of constructing a multiple interface segregation structure at the precipitate/matrix interface was proposed, and based on this concept, a multiple interface segregation structure containing the C/L-AlMgSiCu interfacial phase, newly discovered χ-AgMg interfacial phase, and Sc segregation layer was successfully constructed at the θ′/Al interface. The existence of the multiple interface segregation structure ensured that the designed Al-Cu-Mg-Ag-Si-Sc alloy maintains a yield strength of 400 MPa after thermal exposure at 200 C for 100 h, with a strength retention rate of 97%, creating a new record for the synergistic improvement of strength and heat resistance in aluminum alloys. In addition, combining transmission electron microscopy ex-situ/in-situ characterization with first-principles calculations, it is shown that the χ-AgMg interface phase will be destroyed due to the diffusion of the outer Ag layer during thermal exposure, and gradually dissolve into the matrix, but it can still delay the coarsening behavior of θ′-Al2Cu phase. (3) The criteria for determining whether Ω phase can precipitate are updated in Al-Cu-Mg-Ag-Si alloys with low Mg/Si ratio based on phase diagram thermodynamic calculations and multi-scale structural characterization. When W(Mg)/W(Si) > 1.4 and X(Ag)/X(Mgexcess) > 1, Ω phase can precipitate in Al-Cu-Mg-Ag-Si alloys, where X(Mgexcess) represents the atomic percentage of residual Mg elements after the formation of the AlMgSiCu quaternary precipitate phase C/L phase in the supersaturated solid solution, and the W(Mg) is the mass fraction of Mg in the supersaturated solid solution before artificial ageing. (4) The effects of alloy element content on precipitation behavior and heat resistance of Al-Cu-Mg-Ag-Si alloys were systematically analyzed. Critical conditions for the precipitation of σ-Al5Cu6Mg2 and Ω phase in Al-Cu-Mg-Ag-Si alloys are revealed. Based on calculation of phase diagram results, the conditions for precipitating σ-Al5Cu6Mg2 phase in the alloy are: ① W(Mg)/W(Si) > 1.8; ② W(Cu) > 2.7W(Mg) – 5W(Si). When W(Mg)/W(Si) < 1.8, the alloy is mainly precipitated with C/L/Q′-AlMgSiCu. When W(Cu) < 2.7W(Mg) – 5W(Si), the alloy will generate GPB zone. In addition, W(Ag)/W(Si) > 4 is the critical condition which the Ω phase can the main precipitates in Al-Cu-Mg-Ag-Si alloys. Furthermore, the correlation between precipitate types and heat resistance was summarized, showing that Al-Cu-Mg-Ag-(Si) alloys with Ω phase as the main strengthening phase are more suitable for the preparation of structures with short service time but high temperature, while Al-Cu-Mg-Ag-(Si) alloys with low Mg content and multiple segregation structures are more suitable for structures requiring long-term service at medium to high temperatures. This study, for the first time, combines calculation of phase diagram with multi-scale microstructure characterization, systematically unraveling the effects of element content on precipitation behavior, strength, and heat resistance of Al-Cu-Mg-Ag-(Si) alloys. In addition, a concept of constructing a multiple interface segregation structure at the precipitate/matrix interface was proposed to synergistically improve alloy strength and heat resistance. This work provides theoretical guidance for optimizing the composition and processing of Al-Cu-Mg-Ag-(Si) alloy and regulating the microstructure. Furthermore, it also offers new ideas and theoretical guidance for the development of novel high-strength heat-resistant alloys in other systems. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
|
Editor |
|
|
Language |
|
Wos |
|
Publication Date |
|
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
|
ISBN |
|
Additional Links |
UA library record |
|
Impact Factor |
|
Times cited |
|
Open Access |
|
|
Notes |
|
Approved |
Most recent IF: NA |
|
Call Number |
UA @ admin @ c:irua:206180 |
Serial |
9167 |
Permanent link to this record |
|
|
|
|
Author |
Tang, Z.; Liu, P.; Cao, H.; Bals, S.; Heeres, H.J.; Pescarmona, P.P. |
|
Title |
Pr/ZrO2 prepared by atomic trapping : an efficient catalyst for the conversion of glycerol to lactic acid with concomitant transfer hydrogenation of cyclohexene |
Type |
A1 Journal article |
|
Year |
2019 |
Publication |
ACS catalysis |
Abbreviated Journal |
Acs Catal |
|
Volume |
9 |
Issue |
9 |
Pages |
9953-9963 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
Abstract |
A series of heterogeneous catalysts consisting of highly dispersed Pt nanoparticles supported on nanosized ZrO2 (20 to 60 nm) was synthesized and investigated for the one-pot transfer hydrogenation between glycerol and cyclohexene to produce lactic acid and cyclohexane, without any additional H-2. Different preparation methods were screened, by varying the calcination and reduction procedures with the purpose of optimizing the dispersion of Pt species (i.e., as single-atom sites or extra-fine Pt nanoparticles) on the ZrO2 support. The Pt/ZrO2 catalysts were characterized by means of transmission electron microscopy techniques (HAADF-STEM, TEM), elemental analysis (ICP-OES, EDX mapping), N-2-physisorption, H-2 temperature-programmed-reduction (H-2-TPR), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD). Based on this combination of techniques it was possible to correlate the temperature of the calcination and reduction treatments with the nature of the Pt species. The best catalyst consisted of subnanometer Pt clusters (<1 nm) and atomically dispersed Pt (as Pt2+ and Pt4+) on the ZrO2 support, which were converted into extra-fine Pt nanoparticles (average size = 1.4 nm) upon reduction. These nanoparticles acted as catalytic species for the transfer hydrogenation of glycerol with cyclohexene, which gave an unsurpassed 95% yield of lactic acid salt at 96% glycerol conversion (aqueous glycerol solution, NaOH as promoter, 160 degrees C, 4.5 h, at 20 bar N-2). This is the highest yield and selectivity of lactic acid (salt) reported in the literature so far. Reusability experiments showed a partial and gradual loss of activity of the Pt/ZrO2 catalyst, which was attributed to the experimentally observed aggregation of Pt nanoparticles. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
|
Editor |
|
|
Language |
|
Wos |
000494549700025 |
Publication Date |
2019-09-16 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
2155-5435 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
10.614 |
Times cited |
46 |
Open Access |
OpenAccess |
|
Notes |
Zhenchen Tang acknowledges the financial support from the China Scholarship Council for his Ph.D. grant. All the authors are grateful for the technical support from Erwin Wilbers, Anne Appeldoorn, and Marcel de Vries, the TEM support from Dr. Marc Stuart, and the ICP-OES support from Johannes van der Velde. Pei Liu and Sara Bals acknowledge financial support from the European Commission under the Horizon 2020 Programme by means of grant agreement No. 731019 EUSMI. |
Approved |
Most recent IF: 10.614 |
|
Call Number |
UA @ admin @ c:irua:164643 |
Serial |
6326 |
Permanent link to this record |
|
|
|
|
Author |
Van Tendeloo, L.; Wangermez, W.; Vandekerkhove, A.; Willhammar, T.; Bals, S.; Maes, A.; Martens, J.A.; Kirschhock, C.E.A.; Breynaert, E. |
|
Title |
Postsynthetic high-alumina zeolite crystal engineering in organic free hyper-alkaline media |
Type |
A1 Journal article |
|
Year |
2017 |
Publication |
Chemistry of materials |
Abbreviated Journal |
Chem Mater |
|
Volume |
29 |
Issue |
29 |
Pages |
629-638 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
Abstract |
Postsynthetic modification of high -alumina zeolites in hyper alkaline media can be tailored toward alteration of framework topology, crystal size and morphology, or desired Si/A1 ratio. FAU, EMT, MAZ, KFI, HEU, and LTA starting materials were treated with 1.2 M MOH (M = Na, K, RE, or Cs), leading to systematic ordered porosity or fully transformed frameworks with new topology and adjustable Si/Al ratio. In addition to the versatility of this tool for zeolite crystal engineering, these alterations improve understanding of the crystal chemistry. Such knowledge can guide further development in zeolite crystal engineering. Postsynthetic alteration also provides insight on the long-term stability of aluminosilicate zeolites that are used as a sorption sink in concrete -based waste disposal facilities in harsh alkaline conditions. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
American Chemical Society |
Place of Publication |
Washington, D.C |
Editor |
|
|
Language |
|
Wos |
000392891700021 |
Publication Date |
2016-12-20 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
0897-4756 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
9.466 |
Times cited |
16 |
Open Access |
OpenAccess |
|
Notes |
; This work was supported by long-term structural funding by the Flemish Government (Methusalem grant of Prof. J. Martens) and by ONDRAF/NIRAS, the Belgian Agency for Radioactive Waste and Fissile Materials, as part of the program on surface disposal of Belgian Category A waste. The Belgian government is acknowledged for financing the interuniversity poles of attraction (IAP-PAI). S.B. acknowledges financial support from European Research Council (ERC Advanced Grant No. 24691-COUNTATOMS, ERC Starting Grant No. 335078-COLOURATOMS). ; Ecas_Sara |
Approved |
Most recent IF: 9.466 |
|
Call Number |
UA @ lucian @ c:irua:152674UA @ admin @ c:irua:152674 |
Serial |
5145 |
Permanent link to this record |
|
|
|
|
Author |
Meynen, V.; Beyers, E.; Cool, P.; Vansant, E.F.; Mertens, M.; Weyten, H.; Lebedev, O.I.; Van Tendeloo, G. |
|
Title |
Post-synthesis deposition of V-Zeolitic nanoparticles in SBA-15 |
Type |
A1 Journal article |
|
Year |
2004 |
Publication |
Chemical communications |
Abbreviated Journal |
Chem Commun |
|
Volume |
|
Issue |
|
Pages |
898-890 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT); Laboratory of adsorption and catalysis (LADCA) |
|
Abstract |
|
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
|
Editor |
|
|
Language |
|
Wos |
000221124300084 |
Publication Date |
2004-03-25 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1359-7345;1364-548X; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
6.319 |
Times cited |
22 |
Open Access |
|
|
Notes |
|
Approved |
Most recent IF: 6.319; 2004 IF: 3.997 |
|
Call Number |
UA @ lucian @ c:irua:44934 |
Serial |
2684 |
Permanent link to this record |
|
|
|
|
Author |
Huybrechts, W.; Mali, G.; Kuśtrowski, P.; Willhammar, T.; Mertens, M.; Bals, S.; Van Der Voort, P.; Cool, P. |
|
Title |
Post-synthesis bromination of benzene bridged PMO as a way to create a high potential hybrid material |
Type |
A1 Journal article |
|
Year |
2016 |
Publication |
Microporous and mesoporous materials: zeolites, clays, carbons and related materials |
Abbreviated Journal |
Micropor Mesopor Mat |
|
Volume |
236 |
Issue |
236 |
Pages |
244-249 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT); Laboratory of adsorption and catalysis (LADCA) |
|
Abstract |
Periodic mesoporous organosilicas provide the best of two worlds: the strength and porosity of an inorganic framework combined with the infinite possibilities created by the organic bridging unit. In this work we focus on post-synthetical modification of benzene bridged PMO, in order to create bromobenzene PMO. In the past, this proved to be very challenging due to unwanted structural deterioration. However, now we have found a way to brominate this material whilst keeping the structure intact. In-depth structural analysis by solid state NMR and XPS shows both vast progress over previous attempts as well as potential for improvement. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
Amsterdam |
Editor |
|
|
Language |
|
Wos |
000385899600028 |
Publication Date |
2016-09-10 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1387-1811 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
3.615 |
Times cited |
7 |
Open Access |
OpenAccess |
|
Notes |
; The authors would like to thank financial support from the FWO-Flanders (project no G.0068.13). The authors further acknowledge financial support of the University of Antwerp through BOF GOA funding. S.B. acknowledges financial support from European Research Council (ERC Starting Grant #335078-COLOURATOM). ; ecas_Sara |
Approved |
Most recent IF: 3.615 |
|
Call Number |
UA @ lucian @ c:irua:135274 |
Serial |
4228 |
Permanent link to this record |
|
|
|
|
Author |
Ke, X.; Bittencourt, C.; Van Tendeloo, G. |
|
Title |
Possibilities and limitations of advanced transmission electron microscopy for carbon-based nanomaterials |
Type |
A1 Journal article |
|
Year |
2015 |
Publication |
Beilstein journal of nanotechnology |
Abbreviated Journal |
Beilstein J Nanotech |
|
Volume |
6 |
Issue |
6 |
Pages |
1541-1557 |
|
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
|
Abstract |
A major revolution for electron microscopy in the past decade is the introduction of aberration correction, which enables one to increase both the spatial resolution and the energy resolution to the optical limit. Aberration correction has contributed significantly to the imaging at low operating voltages. This is crucial for carbon-based nanomaterials which are sensitive to electron irradiation. The research of carbon nanomaterials and nanohybrids, in particular the fundamental understanding of defects and interfaces, can now be carried out in unprecedented detail by aberration-corrected transmission electron microscopy (AC-TEM). This review discusses new possibilities and limits of AC-TEM at low voltage, including the structural imaging at atomic resolution, in three dimensions and spectroscopic investigation of chemistry and bonding. In situ TEM of carbon-based nanomaterials is discussed and illustrated through recent reports with particular emphasis on the underlying physics of interactions between electrons and carbon atoms. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
|
Editor |
|
|
Language |
|
Wos |
000357977300001 |
Publication Date |
2015-07-16 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
2190-4286; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
3.127 |
Times cited |
10 |
Open Access |
|
|
Notes |
246791 Countatoms |
Approved |
Most recent IF: 3.127; 2015 IF: 2.670 |
|
Call Number |
c:irua:126857 |
Serial |
2682 |
Permanent link to this record |
|
|
|
|
Author |
Kuriplach, J.; van Petegem, S.; Hou, M.; Van Tendeloo, G.; Schryvers, D.; et al. |
|
Title |
Positron annihilation study of nanocrystalline Ni3Al : simulations and measurements |
Type |
A1 Journal article |
|
Year |
2001 |
Publication |
Materials science forum
T2 – 12th International Conference on Positron Annihilation (ICPA-12), AUG 06-12, 2000, UNIV BUNDERSWEHR MUNCHEN, NEUBIBERG, GERMANY |
Abbreviated Journal |
|
|
Volume |
363-3 |
Issue |
|
Pages |
94-96 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
Abstract |
A positron lifetime experiment is performed on samples produced by the compaction of nanocrystalline Ni3Al powder synthesized by the inert-gas condensation technique. In the lifetime spectrum we observe two components corresponding to defects. Computer (virtual) samples of n-Ni3Al are obtained using molecular dynamics combined with the Metropolis Monte Carlo technique. Positron lifetime calculations are then performed on selected regions of simulated samples. For this purpose, a new computational technique based on a generalization of the atomic superposition method for non-periodic systems was developed. Lifetimes calculated in this way are compared to experiment. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
Lausanne |
Editor |
|
|
Language |
|
Wos |
|
Publication Date |
0000-00-00 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
0-87849-875-3 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
|
Times cited |
|
Open Access |
|
|
Notes |
|
Approved |
Most recent IF: NA |
|
Call Number |
UA @ lucian @ c:irua:102865 |
Serial |
2681 |
Permanent link to this record |
|
|
|
|
Author |
Tavernier, S.; op de Beeck, W.; Ghekiere, J.-P.; Van Tendeloo, G. |
|
Title |
Positively charged toner for use in electrostatography : US5532097 : 07/02/1996 |
Type |
Patent |
|
Year |
1996 |
Publication |
|
Abbreviated Journal |
|
|
Volume |
|
Issue |
|
Pages |
|
|
Keywords |
Patent; Electron microscopy for materials research (EMAT) |
|
Abstract |
|
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
|
Editor |
|
|
Language |
|
Wos |
|
Publication Date |
0000-00-00 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
|
ISBN |
|
Additional Links |
UA library record |
|
Impact Factor |
|
Times cited |
|
Open Access |
|
|
Notes |
|
Approved |
no |
|
Call Number |
UA @ lucian @ c:irua:110388 |
Serial |
2680 |
Permanent link to this record |
|
|
|
|
Author |
Hadad, C.; Ke, X.; Carraro, M.; Sartorel, A.; Bittencourt, C.; Van Tendeloo, G.; Bonchio, M.; Quintana, M.; Prato, M. |
|
Title |
Positive graphene by chemical design : tuning supramolecular strategies for functional surfaces |
Type |
A1 Journal article |
|
Year |
2014 |
Publication |
Chemical communications |
Abbreviated Journal |
Chem Commun |
|
Volume |
50 |
Issue |
7 |
Pages |
885-887 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
Abstract |
A diazonium based-arylation reaction was efficiently used for the covalent addition of 4-amino-N,N,N-trimethylbenzene ammonium to stable dispersions of few layer graphene (FLG) yielding an innovative FLG platform with positive charges to immobilize inorganic polyanions. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
London |
Editor |
|
|
Language |
|
Wos |
000328884500036 |
Publication Date |
2013-11-08 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1359-7345;1364-548X; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
6.319 |
Times cited |
19 |
Open Access |
|
|
Notes |
|
Approved |
Most recent IF: 6.319; 2014 IF: 6.834 |
|
Call Number |
UA @ lucian @ c:irua:113733 |
Serial |
2678 |
Permanent link to this record |
|
|
|
|
Author |
Belik, A.; Izumi, F.; Ikeda, T.; Morozov, V.A.; Dilanian, R.; Torii, S.; Kopnin, E.; Lebedev, O.I.; Van Tendeloo, G.; Lazoryak, B.I. |
|
Title |
Positional and orientational disorder in a solid solution of Sr9-xNi1.5-x(PO4)7 (x=0.3) |
Type |
A1 Journal article |
|
Year |
2002 |
Publication |
Chemistry and materials |
Abbreviated Journal |
Chem Mater |
|
Volume |
14 |
Issue |
|
Pages |
4464-4472 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
Abstract |
|
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
|
Editor |
|
|
Language |
|
Wos |
000178782900069 |
Publication Date |
2002-10-21 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
0897-4756;1520-5002; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
9.466 |
Times cited |
28 |
Open Access |
|
|
Notes |
|
Approved |
Most recent IF: 9.466; 2002 IF: 3.967 |
|
Call Number |
UA @ lucian @ c:irua:54768 |
Serial |
2676 |
Permanent link to this record |
|
|
|
|
Author |
Deng, S.; Kurttepeli, M.; Cott, D.J.; Bals, S.; Detavernier, C. |
|
Title |
Porous nanostructured metal oxides synthesized through atomic layer deposition on a carbonaceous template followed by calcination |
Type |
A1 Journal article |
|
Year |
2015 |
Publication |
Journal of materials chemistry A : materials for energy and sustainability |
Abbreviated Journal |
J Mater Chem A |
|
Volume |
3 |
Issue |
3 |
Pages |
2642-2649 |
|
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
|
Abstract |
Porous metal oxides with nano-sized features attracted intensive interest in recent decades due to their high surface area which is essential for many applications, e.g. Li ion batteries, photocatalysts, fuel cells and dye-sensitized solar cells. Various approaches have so far been investigated to synthesize porous nanostructured metal oxides, including self-assembly and template-assisted synthesis. For the latter approach, forests of carbon nanotubes are considered as particularly promising templates, with respect to their one-dimensional nature and the resulting high surface area. In this work, we systematically investigate the formation of porous metal oxides (Al2O3, TiO2, V2O5 and ZnO) with different morphologies using atomic layer deposition on multi-walled carbon nanotubes followed by post-deposition calcination. X-ray diffraction, scanning electron microscopy accompanied by X-ray energy dispersive spectroscopy and transmission electron microscopy were used for the investigation of morphological and structural transitions at the micro- and nano-scale during the calcination process. The crystallization temperature and the surface coverage of the metal oxides and the oxidation temperature of the carbon nanotubes were found to produce significant influence on the final morphology. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
Cambridge |
Editor |
|
|
Language |
|
Wos |
000348990500019 |
Publication Date |
2014-12-06 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
2050-7488;2050-7496; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
8.867 |
Times cited |
23 |
Open Access |
OpenAccess |
|
Notes |
Fwo; 239865 Cocoon; 335078 Colouratoms; ECAS_Sara; (ROMEO:yellow; preprint:; postprint:restricted ; pdfversion:cannot); |
Approved |
Most recent IF: 8.867; 2015 IF: 7.443 |
|
Call Number |
c:irua:125298 |
Serial |
2673 |
Permanent link to this record |
|
|
|
|
Author |
Van Eyndhoven, G.; Kurttepeli, M.; van Oers, C.J.; Cool, P.; Bals, S.; Batenburg, K.J.; Sijbers, J. |
|
Title |
Pore REconstruction and Segmentation (PORES) method for improved porosity quantification of nanoporous materials |
Type |
A1 Journal article |
|
Year |
2015 |
Publication |
Ultramicroscopy |
Abbreviated Journal |
Ultramicroscopy |
|
Volume |
148 |
Issue |
148 |
Pages |
10-19 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab; Laboratory of adsorption and catalysis (LADCA) |
|
Abstract |
Electron tomography is currently a versatile tool to investigate the connection between the structure and properties of nanomaterials. However, a quantitative interpretation of electron tomography results is still far from straightforward. Especially accurate quantification of pore-space is hampered by artifacts introduced in all steps of the processing chain, i.e., acquisition, reconstruction, segmentation and quantification. Furthermore, most common approaches require subjective manual user input. In this paper, the PORES algorithm POre REconstruction and Segmentation is introduced; it is a tailor-made, integral approach, for the reconstruction, segmentation, and quantification of porous nanomaterials. The PORES processing chain starts by calculating a reconstruction with a nanoporous-specific reconstruction algorithm: the Simultaneous Update of Pore Pixels by iterative REconstruction and Simple Segmentation algorithm (SUPPRESS). It classifies the interior region to the pores during reconstruction, while reconstructing the remaining region by reducing the error with respect to the acquired electron microscopy data. The SUPPRESS reconstruction can be directly plugged into the remaining processing chain of the PORES algorithm, resulting in accurate individual pore quantification and full sample pore statistics. The proposed approach was extensively validated on both simulated and experimental data, indicating its ability to generate accurate statistics of nanoporous materials. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
Amsterdam |
Editor |
|
|
Language |
|
Wos |
000345973000002 |
Publication Date |
2014-08-23 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
0304-3991; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
2.843 |
Times cited |
7 |
Open Access |
OpenAccess |
|
Notes |
Colouratom; ECAS_Sara; (ROMEO:green; preprint:; postprint:can ; pdfversion:cannot); |
Approved |
Most recent IF: 2.843; 2015 IF: 2.436 |
|
Call Number |
c:irua:119083 |
Serial |
2672 |
Permanent link to this record |