NANOlab Center of Excellence literature database -- Query Results

	NANOlab Center of Excellence literature database Home \| Show All \| Simple Search \| Advanced Search	Login Quick Search: Field: contains: ...
	91–120 of 259 records found matching your query (RSS):

Select All Deselect All

<< 1 2 3 4 5 6 7 8 9 >>

List View

Citations

Details

	Records
	Author	Tinck, S.; Boullart, W.; Bogaerts, A.
	Title	Investigation of etching and deposition processes of Cl₂/O₂/Ar inductively coupled plasmas on silicon by means of plasmasurface simulations and experiments			Type	A1 Journal article
	Year	2009	Publication	Journal of physics: D: applied physics	Abbreviated Journal	J Phys D Appl Phys
	Volume	42	Issue		Pages	095204,1-095204,13
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	In this paper, a simulation method is described to predict the etching behaviour of Cl2/O2/Ar inductively coupled plasmas on a Si substrate, as used in shallow trench isolation for the production of electronic devices. The hybrid plasma equipment model (HPEM) developed by Kushner et al is applied to calculate the plasma characteristics in the reactor chamber and two additional Monte Carlo simulations are performed to predict the fluxes, angles and energy of the plasma species bombarding the Si substrate, as well as the resulting surface processes such as etching and deposition. The simulations are performed for a wide variety of operating conditions such as gas composition, chamber pressure, power deposition and substrate bias. It is predicted by the simulations that when the fraction of oxygen in the gas mixture is too high, the oxidation of the Si substrate is superior to the etching of Si by chlorine species, resulting in an etch rate close to zero as is also observed in the experiments.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000265531000030	Publication Date	2009-04-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-3727;1361-6463;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.588	Times cited	23	Open Access
	Notes				Approved	Most recent IF: 2.588; 2009 IF: 2.083
	Call Number	UA @ lucian @ c:irua:75601			Serial	1731
Permanent link to this record



	Author	Bultinck, E.; Mahieu, S.; Depla, D.; Bogaerts, A.
	Title	Reactive sputter deposition of TiN_x films, simulated with a particle-in-cell/Monte Carlo collisions model			Type	A1 Journal article
	Year	2009	Publication	New journal of physics	Abbreviated Journal	New J Phys
	Volume	11	Issue		Pages	023039,1-023039,24
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	The physical processes in an Ar/N2 magnetron discharge used for the reactive sputter deposition of TiNx thin films were simulated with a 2d3v particle-in-cell/Monte Carlo collisions (PIC/MCC) model. Cathode currents and voltages were calculated self-consistently and compared with experiments. Also, ion fractions were calculated and validated with mass spectrometric measurements. With this PIC/MCC model, the influence of N2/Ar gas ratio on the particle densities and fluxes was investigated, taking into account the effect of the poisoned state of the target.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Bristol	Editor
	Language		Wos	000263744100001	Publication Date	2009-02-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1367-2630;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.786	Times cited	23	Open Access
	Notes				Approved	Most recent IF: 3.786; 2009 IF: 3.312
	Call Number	UA @ lucian @ c:irua:73150			Serial	2825
Permanent link to this record



	Author	Baguer, N.; Georgieva, V.; Calderin, L.; Todorov, I.T.; van Gils, S.; Bogaerts, A.
	Title	Study of the nucleation and growth of TiO₂ and ZnO thin films by means of molecular dynamics simulations			Type	A1 Journal article
	Year	2009	Publication	Journal of crystal growth	Abbreviated Journal	J Cryst Growth
	Volume	311	Issue	16	Pages	4034-4043
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	The nucleation and growth of titanium dioxide (TiO2) and zinc oxide (ZnO) thin films on Fe2O3 (hematite), Al2O3 (á-alumina) and SiO2 (á-quartz) are studied by molecular dynamics simulations. The results show the formation of a strong interface region between the substrate and the film in the six systems studied here. A combination of polycrystalline and amorphous phases are observed in the TiO2 films grown on the three substrates. ZnO deposition on the Fe2O3 and Al2O3 crystals yields a monocrystalline film growth. The ZnO film deposited on the SiO2 crystal exhibits less crystallinity. The simulation results are compared with experimental results available in the literature.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000269580100012	Publication Date	2009-06-24
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-0248;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.751	Times cited	23	Open Access
	Notes				Approved	Most recent IF: 1.751; 2009 IF: 1.534
	Call Number	UA @ lucian @ c:irua:77453			Serial	3338
Permanent link to this record



	Author	Schowalter, M.; Rosenauer, A.; Titantah, J.T.; Lamoen, D.
	Title	Temperature-dependent Debye-Waller factors for semiconductors with the wurtzite-type structure			Type	A1 Journal article
	Year	2009	Publication	Acta crystallographica: section A: foundations of crystallography	Abbreviated Journal	Acta Crystallogr A
	Volume	65	Issue		Pages	227-231
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	We computed Debye-Waller factors in the temperature range from 0.1 to 1000 K for AlN, GaN, InN, ZnO and CdO with the wurtzite-type structure. The Debye-Waller factors were derived from phonon densities of states obtained from Hellmann-Feynman forces computed within the density-functional-theory formalism. The temperature dependences of the Debye-Waller factors were fitted and fit parameters are given.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Copenhagen	Editor
	Language		Wos	000264927100006	Publication Date	2009-03-12
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0108-7673;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	5.725	Times cited	23	Open Access
	Notes	Fwo G.0425.05; Esteem 026019			Approved	Most recent IF: 5.725; 2009 IF: 49.926
	Call Number	UA @ lucian @ c:irua:74565			Serial	3497
Permanent link to this record



	Author	Cao, S.; Tirry, W.; van den Broek, W.; Schryvers, D.
	Title	Optimization of a FIB/SEM slice-and-view study of the 3D distribution of Ni₄Ti₃ precipitates in NiTi			Type	A1 Journal article
	Year	2009	Publication	Journal of microscopy	Abbreviated Journal	J Microsc-Oxford
	Volume	233	Issue	1	Pages	61-68
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab
	Abstract	The 3D morphology and distribution of lenticular Ni4Ti3 precipitates in the austenitic B2 matrix of a binary Ni51Ti49 alloy has been investigated by a slice-and-view procedure in a dual-beam focused ion beam/scanning electron microscope system. Due to the weak contrast of the precipitates, proper imaging conditions need to be selected first to allow for semi-automated image treatment. Knowledgeable imaging is further needed to ensure that all variants of the precipitates are observed with equal probability, regardless of sample orientation. Finally, a volume ratio of 10.2% for the Ni4Ti3 precipitates could be calculated, summed over all variants, which yields a net composition of Ni50.27Ti49.73 for the matrix, leading to an increase of 125 degrees for the martensitic start temperature. Also, the expected relative orientation of the different variants of the precipitates could be confirmed.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000262511900008	Publication Date	2009-01-15
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-2720;1365-2818;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.692	Times cited	22	Open Access
	Notes	Multimat Fwo; G0465.05			Approved	Most recent IF: 1.692; 2009 IF: 1.612
	Call Number	UA @ lucian @ c:irua:76026			Serial	2486
Permanent link to this record



	Author	Hao, Y.L.; Djotyan, A.P.; Avetisyan, A.A.; Peeters, F.M.
	Title	Shallow donor states near a semiconductor-insulator-metal interface			Type	A1 Journal article
	Year	2009	Publication	Physical review : B : solid state	Abbreviated Journal	Phys Rev B
	Volume	80	Issue	3	Pages	035329,1-035329,10
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	The lowest energy electronic states of a donor located near a semiconductor-insulator-metal interface are investigated within the effective mass approach. The effect of the finite thickness of the insulator between the semiconductor and the metallic gate on the energy levels is studied. The lowest energy states are obtained through a variational approach, which takes into account the influence of all image charges that arise due to the presence of the metallic and the dielectric interfaces. We compare our results with a numerical exact calculation using the finite element technique.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lancaster, Pa	Editor
	Language		Wos	000268617800101	Publication Date	2009-07-30
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1098-0121;1550-235X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.836	Times cited	22	Open Access
	Notes				Approved	Most recent IF: 3.836; 2009 IF: 3.475
	Call Number	UA @ lucian @ c:irua:77950			Serial	2989
Permanent link to this record



	Author	Berdiyorov, G.R.; Yu, S.H.; Xiao, Z.L.; Peeters, F.M.; Hua, J.; Imre, A.; Kwok, W.K.
	Title	Effect of sample geometry on the phase boundary of a mesoscopic superconducting loop			Type	A1 Journal article
	Year	2009	Publication	Physical review : B : solid state	Abbreviated Journal	Phys Rev B
	Volume	80	Issue	6	Pages	064511,1-064511,6
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	We studied the effect of sample geometry on the evolution of the superconducting state in nanoscale Nb circular and square loops by transport measurements. A multistage resistive transition with temperature is found for both samples, which is related to the effect of contact leads made from the same superconducting material. The H-T phase diagrams close to Tc0 show clear periodic oscillations on top of a parabolic background, i.e., Little-Parks effect. However, the amplitude of the oscillations decreases faster in the circular loop compared to the one in the square sample. Numerical simulations are conducted within the nonlinear Ginzburg-Landau theory to show the effect of sample geometry on the nucleation of superconductivity in superconducting loop structures.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lancaster, Pa	Editor
	Language		Wos	000269638800067	Publication Date	2009-08-17
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1098-0121;1550-235X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.836	Times cited	21	Open Access
	Notes				Approved	Most recent IF: 3.836; 2009 IF: 3.475
	Call Number	UA @ lucian @ c:irua:78292			Serial	833
Permanent link to this record



	Author	Malard, B.; Pilch, J.; Sittner, P.; Gartnerova, V.; Delville, R.; Schryvers, D.; Curfs, C.
	Title	Microstructure and functional property changes in thin Ni-Ti wires heat teated by electric current: high energy X-ray and TEM investigations			Type	A1 Journal article
	Year	2009	Publication	Functional materials letters	Abbreviated Journal	Funct Mater Lett
	Volume	2	Issue	2	Pages	45-54
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	High energy synchrotron X-ray diffraction, transmission electron microscopy and mechanical testing were employed to investigate the evolution of microstructure, texture and functional superelastic properties of 0.1 mm thin as drawn NiTi wires subjected to a nonconventional heat treatment by controlled electric current (FTMT-EC method). As drawn NiTi wires were prestrained in tension and exposed to a sequence of short DC power pulses in the millisecond range. The annealing time in the FTMT-EC processing can be very short but the temperature and force could be very high compared to the conventional heat treatment of SMAs. It is shown that the heavily strained, partially amorphous microstructure of the as drawn NiTi wire transforms under the effect of the DC pulse and tensile stress into a wide range of annealed nanosized microstructures depending on the pulse time. The functional superelastic properties and microstructures of the FTMT-EC treated NiTi wire are comparable to those observed in straight annealed wires.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000271077000001	Publication Date	2009-07-22
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1793-6047;1793-7213;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.234	Times cited	21	Open Access
	Notes	Multimat			Approved	Most recent IF: 1.234; 2009 IF: 2.561
	Call Number	UA @ lucian @ c:irua:77656			Serial	2052
Permanent link to this record



	Author	Ariskin, D.A.; Schweigert, I.V.; Alexandrov, A.L.; Bogaerts, A.; Peeters, F.M.
	Title	Modeling of chemical processes in the low pressure capacitive radio frequency discharges in a mixture of Ar/C₂H₂			Type	A1 Journal article
	Year	2009	Publication	Journal of applied physics	Abbreviated Journal	J Appl Phys
	Volume	105	Issue	6	Pages	063305,1-063305,9
	Keywords	A1 Journal article; Condensed Matter Theory (CMT); Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	We study the properties of a capacitive 13.56 MHz discharge with a mixture of Ar/C<sub>2</sub>H<sub>2</sub> taking into account the plasmochemistry and growth of heavy hydrocarbons. A hybrid model was developed to combine the kinetic description for electron motion and the fluid approach for negative and positive ion transports and plasmochemical processes. A significant change in plasma parameters related to injection of 5.8% portion of acetylene in argon was observed and analyzed. We found that the electronegativity of the mixture is about 30%. The densities of negatively and positively charged heavy hydrocarbons are sufficiently large to be precursors for the formation of nanoparticles in the discharge volume.
	Address
	Corporate Author				Thesis
	Publisher	American Institute of Physics	Place of Publication	New York, N.Y.	Editor
	Language		Wos	000264774000059	Publication Date	2009-03-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0021-8979;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.068	Times cited	21	Open Access
	Notes				Approved	Most recent IF: 2.068; 2009 IF: 2.072
	Call Number	UA @ lucian @ c:irua:74496			Serial	2121
Permanent link to this record



	Author	Martens, T.; Brok, W.J.M.; van Dijk, J.; Bogaerts, A.
	Title	On the regime transitions during the formation of an atmospheric pressure dielectric barrier glow discharge			Type	A1 Journal article
	Year	2009	Publication	Journal of physics: D: applied physics	Abbreviated Journal	J Phys D Appl Phys
	Volume	42	Issue	12	Pages	122002,1-122002,5
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	The atmospheric pressure dielectric barrier discharge in helium is a pulsed discharge in nature. If during the electrical current pulse a glow discharge is reached, then this pulse will last only a few microseconds in operating periods of sinusoidal voltage with lengths of about 10 to 100 µs. In this paper we demonstrate that right before a glow discharge is reached, the discharge very closely resembles the commonly assumed Townsend discharge structure, but actually contains some significant differing features and hence should not be considered as a Townsend discharge. In order to clarify this, we present calculation results of high time and space resolution of the pulse formation. The results indicate that indeed a maximum of ionization is formed at the anode, but that the level of ionization remains high and that the electric field at that time is significantly disturbed. Our results also show where this intermediate structure comes from.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000266639300002	Publication Date	2009-05-22
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-3727;1361-6463;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.588	Times cited	21	Open Access
	Notes				Approved	Most recent IF: 2.588; 2009 IF: 2.083
	Call Number	UA @ lucian @ c:irua:76458			Serial	2450
Permanent link to this record



	Author	Croitoru, M.D.; Shanenko, A.A.; Kaun, C.C.; Peeters, F.M.
	Title	Superconducting nanowires: interplay of discrete transverse modes with supercurrent			Type	A1 Journal article
	Year	2009	Publication	Physical review : B : solid state	Abbreviated Journal	Phys Rev B
	Volume	80	Issue	2	Pages	024513,1-024513,11
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Condensed Matter Theory (CMT)
	Abstract	From a numerical solution of the Bogoliubov-de Gennes equations, we investigate an interplay of the transverse discrete modes with a longitudinal supercurrent in a metallic cylindrical superconducting nanowire. The superconductor-to-normal transition induced by a longitudinal superflow of electrons is found to occur as a cascade of jumps in the order parameter (supercurrent and superfluid density) as a function of the superfluid velocity for diameters d<1015 nm (for Al parameters) and sufficiently low temperatures T<0.30.4Tc, with Tc the critical temperature. When approaching Tc, the jumps are smoothed into steplike but continuous drops. A similar picture occurs for d>1520 nm. Only when the diameter exceeds 5070 nm the quantum-size cascades are fully washed out, and we arrive at the mesoscopic regime. Below this regime the critical current density jc exhibits the quantum-size oscillations with pronounced resonant enhancements: the smaller the diameter, the more significant is the enhancement. Thickness fluctuations of real samples will smooth out such oscillations into an overall growth of jc with decreasing nanowire diameter.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lancaster, Pa	Editor
	Language		Wos	000268617500092	Publication Date	2009-07-22
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1098-0121;1550-235X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.836	Times cited	21	Open Access
	Notes				Approved	Most recent IF: 3.836; 2009 IF: 3.475
	Call Number	UA @ lucian @ c:irua:77949			Serial	3358
Permanent link to this record



	Author	Ke, X.; Bals, S.; Romo Negreira, A.; Hantschel, T.; Bender, H.; Van Tendeloo, G.
	Title	TEM sample preparation by FIB for carbon nanotube interconnects			Type	A1 Journal article
	Year	2009	Publication	Ultramicroscopy	Abbreviated Journal	Ultramicroscopy
	Volume	109	Issue	11	Pages	1353-1359
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	A powerful method to study carbon nanotubes (CNTs) grown in patterned substrates for potential interconnects applications is transmission electron microscopy (TEM). However, high-quality TEM samples are necessary for such a study. Here, TEM specimen preparation by focused ion beam (FIB) has been used to obtain lamellae of patterned samples containing CNTs grown inside contact holes. A dual-cap Pt protection layer and an extensive 5 kV cleaning procedure are applied in order to preserve the CNTs and avoid deterioration during milling. TEM results show that the inner shell structure of the carbon nanotubes has been preserved, which proves that focused ion beam is a useful technique to prepare TEM samples of CNT interconnects.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000270765800006	Publication Date	2009-07-11
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0304-3991;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.843	Times cited	21	Open Access
	Notes	Esteem 026019; Iap			Approved	Most recent IF: 2.843; 2009 IF: 2.067
	Call Number	UA @ lucian @ c:irua:79074			Serial	3485
Permanent link to this record



	Author	Denecke, M.A.; Brendebach, B.; de Nolf, W.; Falkenberg, G.; Janssens, K.; Simon, R.
	Title	Spatially resolved micro-X-ray fluorescence and micro-X-ray absorption fine structure study of a fractured granite bore core following a radiotracer experiment			Type	A1 Journal article
	Year	2009	Publication	Spectrochimica acta: part B : atomic spectroscopy	Abbreviated Journal	Spectrochim Acta B
	Volume	64	Issue	8	Pages	791-795
	Keywords	A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation)
	Abstract	Spatially resolved X-ray absorption and fluorescence investigation with a micrometer-scale resolution on actinide-containing samples provide information necessary for safety assessment of nuclear waste disposal. In this paper one example of such an experiment is presented. This example entails neptunium speciation in a fractured granite bore core from the Swedish Äspö Hard Rock Laboratory following a radiotracer experiment using µ-XAFS and µ-XRF. In order to probe micro-volumes below the surface in the granite samples and thereby avoid potential changes in the Np speciation during cutting of the bore core, a confocal irradiationdetection geometry is employed. µ-XAFS results for a selected granite bore core cross section with ~ 3 nmol Np/g reveal that Np, originally introduced as Np(V) in the tracer cocktail, is present in the granite in its reduced Np(IV) form. The Np(IV) is often present as particles, tens of µm in size. Elemental distribution maps show the tracer Np to be located in fissures and permeable channels not larger than 100 µm. The Np distribution appears often correlated with Zn also present in some fissures. We observe small granite fissures containing Fe (presumably Fe(II)), where we do not detect any Np. It is feasible that inflowing Np(V) has a shorter residence time in large fractures, while in the smaller fissures migration is slower, leading to longer residence times, i.e., reaction times, where it is reduced to less soluble Np(IV) and becomes thereby immobilized.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000269995300013	Publication Date	2009-06-10
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0584-8547; 0038-6987	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.241	Times cited	21	Open Access
	Notes				Approved	Most recent IF: 3.241; 2009 IF: 2.719
	Call Number	UA @ admin @ c:irua:79740			Serial	5837
Permanent link to this record



	Author	Abakumov, A.M.; King, G.; Laurinavichute, V.K.; Rozova, M.G.; Woodward, P.M.; Antipov, E.V.
	Title	The crystal structure of \alpha-K₃AIF₆: elpasolites and double perovskites with broken corner-sharing connectivity of the octahedral framework			Type	A1 Journal article
	Year	2009	Publication	Inorganic chemistry	Abbreviated Journal	Inorg Chem
	Volume	48	Issue	19	Pages	9336-9344
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The crystal structure of α-K3AlF6 was solved and refined from a combination of powder X-ray and neutron diffraction data (a = 18.8385(3)Å, c = 33.9644(6)Å, S.G. I41/a, Z = 80, RP(X-ray) = 0.037, RP(neutron) = 0.053). The crystal structure is of the A2BB′X6 elpasolite type with the a = b ≈ ae√5, c = 4ae superstructure (ae, parameter of the elpasolite subcell) and rock-salt-type ordering of the K and Al cations over the B and B′ positions, respectively. The remarkable feature of α-K3AlF6 is a rotation of 2/5 of the AlF6 octahedra by π/4 around one of the crystal axes of the elpasolite subcell, coinciding with the 4-fold symmetry axes of the AlF6 octahedra. The rotation of the AlF6 octahedra replaces the corner-sharing between the K and Al polyhedra by edge-sharing, resulting in an increase of coordination numbers of the K cations at the B positions up to 7 and 8. Due to significant deformations of the K polyhedra, the corner-sharing connectivity of the octahedral elpasolite framework is broken and the rotations of the AlF6 octahedra do not have a cooperative character. Elpasolites and double perovskites with similar structural organization are discussed. The difference in ionic radii of the B and B′ cations as well as the tolerance factor are proposed to be the parameters governing the formation of elpasolites and double perovskites with broken corner-sharing connectivity of the octahedral framework.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Easton, Pa	Editor
	Language		Wos	000270091000039	Publication Date	2009-09-03
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0020-1669;1520-510X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.857	Times cited	20	Open Access
	Notes				Approved	Most recent IF: 4.857; 2009 IF: 4.657
	Call Number	UA @ lucian @ c:irua:79733			Serial	568
Permanent link to this record



	Author	Doenen, M.; Zhang, L.; Erni, R.; Williams, O.A.; Hardy, A.; van Bael, M.K.; Wagner, P.; Haenen, K.; Nesladek, M.; Van Tendeloo, G.
	Title	Diamond nucleation by carbon transport from buried nanodiamond TiO₂ sol-gel composites			Type	A1 Journal article
	Year	2009	Publication	Advanced materials	Abbreviated Journal	Adv Mater
	Volume	21	Issue	6	Pages	670-673
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Weinheim	Editor
	Language		Wos	000263492000007	Publication Date	2008-12-02
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0935-9648;1521-4095;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	19.791	Times cited	20	Open Access
	Notes	Fwo; Iap-P6/42; Esteem 026019			Approved	Most recent IF: 19.791; 2009 IF: NA
	Call Number	UA @ lucian @ c:irua:76329			Serial	688
Permanent link to this record



	Author	Smeulders, G.; Meynen, V.; van Baelen, G.; Mertens, M.; Lebedev, O.I.; Van Tendeloo, G.; Maes, B.U.W.; Cool, P.
	Title	Rapid microwave-assisted synthesis of benzene bridged periodic mesoporous organosilicas			Type	A1 Journal article
	Year	2009	Publication	Journal of materials chemistry	Abbreviated Journal	J Mater Chem
	Volume	19	Issue	19	Pages	3042-3048
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Laboratory of adsorption and catalysis (LADCA); Organic synthesis (ORSY)
	Abstract	Following extended use in organic chemistry, microwave-assisted synthesis is gaining more importance in the field of inorganic chemistry, especially for the synthesis of nanoporous materials. It offers some major advantages such as a significant shortening of the synthesis time and an improved promotion of nucleation. In the research here reported, microwave technology is applied for the synthesis of benzene bridged PMOs (periodic mesoporous organosilicas). PMOs are one of the latest innovations in the field of hybrid ordered mesoporous materials and have attracted much attention because of their feasibility in electronics, catalysis, separation and sorption applications. The different synthesis steps (stirring, aging and extraction) of the classical PMO synthesis are replaced by microwave-assisted synthesis steps. The characteristics of the as-synthesized materials are evaluated by X-ray diffraction, N2-sorption, thermogravimetric analysis, scanning- and transmission electron microscopy. The microwave-assisted synthesis drastically reduces the synthesis time by more than 40 hours without any loss in structural properties, such as mesoscale and molecular ordering. The porosity of the PMO materials has even been improved by more than 25%. Moreover, the number of handling/transfer steps and amounts of chemicals and waste are drastically reduced. The study also shows that there is a clear time (1 to 3 hours) and temperature frame (373 K to 403 K) wherein synthesis of benzene bridged PMO is optimal. In conclusion, the microwave-assisted synthesis pathway allows an improved material to be obtained in a more economical way i.e. a much shorter time with fewer chemicals and less waste.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge	Editor
	Language		Wos	000265919300024	Publication Date	2009-03-17
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0959-9428;1364-5501;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	20	Open Access
	Notes	Fwo; Iwt			Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:76844			Serial	2810
Permanent link to this record



	Author	Bogaerts, A.; Bultinck, E.; Eckert, M.; Georgieva, V.; Mao, M.; Neyts, E.; Schwaederlé, L.
	Title	Computer modeling of plasmas and plasma-surface interactions			Type	A1 Journal article
	Year	2009	Publication	Plasma processes and polymers	Abbreviated Journal	Plasma Process Polym
	Volume	6	Issue	5	Pages	295-307
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	In this paper, an overview is given of different modeling approaches used for describing gas discharge plasmas, as well as plasma-surface interactions. A fluid model is illustrated for describing the detailed plasma chemistry in capacitively coupled rf discharges. The strengths and limitations of Monte Carlo simulations and of a particle-in-cell-Monte Carlo collisions model are explained for a magnetron discharge, whereas the capabilities of a hybrid Monte Carlo-fluid approach are illustrated for a direct current glow discharge used for spectrochemical analysis of materials. Finally, some examples of molecular dynamics simulations, for the purpose of plasma-deposition, are given.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Weinheim	Editor
	Language		Wos	000266471800003	Publication Date	2009-04-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1612-8850;1612-8869;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.846	Times cited	18	Open Access
	Notes				Approved	Most recent IF: 2.846; 2009 IF: 4.037
	Call Number	UA @ lucian @ c:irua:76833			Serial	461
Permanent link to this record



	Author	Lindner, H.; Autrique, D.; Garcia, C.C.; Niemax, K.; Bogaerts, A.
	Title	Optimized transport setup for high repetition rate pulse-separated analysis in laser ablation-inductively coupled plasma mass spectrometry			Type	A1 Journal article
	Year	2009	Publication	Analytical chemistry	Abbreviated Journal	Anal Chem
	Volume	81	Issue	11	Pages	4241-4248
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	An optimized laser ablation setup, proposed for high repetition rate inductively coupled plasma mass spectrometry (ICPMS) analyses such as 2D imaging or depth profiling, is presented. For such applications, the particle washout time needs to be as short as possible to allow high laser pulse frequencies for reduced analysis time. Therefore, it is desirable to have an ablation setup that operates as a laminar flow reactor (LFR). A top-down strategy was applied that resulted in the present design. In the first step, a previously applied ablation setup was analyzed on the basis of computational fluid dynamics (CFD) results presented by D. Autrique et al. (Spectrochim. Acta, B 2008, 63, 257−270). By means of CFD simulations, the design was modified in such a way that it operated in the LFR regime. Experimental results demonstrate that the current design can indeed be regarded as an LFR. Furthermore, the operation under LFR conditions allowed some insight into the initial radial concentration distribution if the experimental ICPMS signal and analytical expressions are taken into account. Recommendations for a modified setup for more resilient spatial distributions are given. With the present setup, a washout time of 140 ms has been achieved for a 3% signal area criterion. Therefore, 7 Hz repetition rates can be applied with the present setup. Using elementary formulas of the analytical model, an upper bound for the washout times for similar setups can be predicted. The authors believe that the presented setup geometry comes close to the achievable limit for reliable short washout times.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000266601800014	Publication Date	2009-04-29
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0003-2700;1520-6882;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.32	Times cited	18	Open Access
	Notes				Approved	Most recent IF: 6.32; 2009 IF: 5.214
	Call Number	UA @ lucian @ c:irua:76935			Serial	2492
Permanent link to this record



	Author	Neira, I.S.; Kolen'ko, Y.V.; Lebedev, O.I.; Van Tendeloo, G.; Gupta, H.S.; Matsushita, N.; Yoshimura, M.; Guitian, F.
	Title	Rational synthesis of a nanocrystalline calcium phosphate cement exhibiting rapid conversion to hydroxyapatite			Type	A1 Journal article
	Year	2009	Publication	Materials science and engineering: part C: biomimetic materials	Abbreviated Journal	Mat Sci Eng C-Mater
	Volume	29	Issue	7	Pages	2124-2132
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The rational synthesis, comprehensive characterization, and mechanical and micromechanical properties of a calcium phosphate cement are presented. Hydroxyapatite cement biomaterial was synthesized from reactive sub-micrometer-sized dicalcium phosphate dihydrate and tetracalcium phosphate via a dissolution-precipitation reaction using water as the liquid phase. As a result nanostructured, Ca-deficient and carbonated B-type hydroxyapatite is formed. The cement shows good processibility, sets in 22 ± 2 min and entirely transforms to the end product after 6 h of setting reaction, one of the highest conversion rates among previously reported for calcium phosphate cements based on dicalcium and tetracalcium phosphates. The combination of all elucidated physical-chemical traits leads to an essential bioactivity and biocompatibility of the cement, as revealed by in vitro acellular simulated body fluid and cell culture studies. The compressive strength of the produced cement biomaterial was established to be 25 ± 3 MPa. Furthermore, nanoindentation tests were performed directly on the cement to probe its local elasticity and plasticity at sub-micrometer/micrometer level. The measured elastic modulus and hardness were established to be Es = 23 ± 3.5 and H = 0.7 ± 0.2 GPa, respectively. These values are in close agreement with those reported in literature for trabecular and cortical bones, reflecting good elastic and plastic coherence between synthesized cement biomaterial and human bones.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lausanne	Editor
	Language		Wos	000270159200008	Publication Date	2009-04-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0928-4931;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.164	Times cited	18	Open Access
	Notes	Esteem 026019			Approved	Most recent IF: 4.164; 2009 IF: NA
	Call Number	UA @ lucian @ c:irua:79312			Serial	2812
Permanent link to this record



	Author	Pop, N.; Pralong, V.; Caignaert, V.; Colin, J.F.; Malo, S.; Van Tendeloo, G.; Raveau, B.
	Title	Topotactic transformation of the cationic conductor Li₄Mo₅O₁₇ into a rock salt type oxide Li₁₂Mo₅O₁₇			Type	A1 Journal article
	Year	2009	Publication	Chemistry of materials	Abbreviated Journal	Chem Mater
	Volume	21	Issue	14	Pages	3242-3250
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Intercalation of lithium in the ribbon structure Li4Mo5O17 has been achieved, using both electrochemistry and soft chemistry. The ab initio structure determination of the ¡°Mo−O¡± framework of Li12Mo5O17 shows that the [Mo5O17]¡Þ ribbons keep the same arrangement of edge sharing MoO6 octahedra and the same orientation as in the parent structure but that a topotactic antidistortion of the ribbons appears, as a result of the larger size of Mo4+ in ¡°Li12¡± compared to Mo6+ in ¡°Li4¡±. On the basis of bond valence calculations, it is observed that 12 octahedral sites are available for Li+ in the new structure so that an ordered hypothetical rock salt type structure can be proposed for Li12Mo5O17. After the first Li insertion, a stable reversible capacity of 100 mA¡¤h/g is maintained after 20 cycles. A complete structural reversibility leading back to the ribbon type Li4Mo5O17 structure is obtained using a very low rate of C/100. The exploration of the Li mobility in those oxides shows that Li4Mo5O17 is a cationic conductor with ¦Ò = 10−3.5 S/cm at 500 ¡ãC and Ea = 0.35 eV.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000268174400032	Publication Date	2009-06-24
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0897-4756;1520-5002;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	9.466	Times cited	18	Open Access
	Notes				Approved	Most recent IF: 9.466; 2009 IF: 5.368
	Call Number	UA @ lucian @ c:irua:78285			Serial	3682
Permanent link to this record



	Author	Lin, N.S.; Misko, V.R.; Peeters, F.M.
	Title	Unconventional vortex dynamics in mesoscopic superconducting corbino disks			Type	A1 Journal article
	Year	2009	Publication	Physical review letters	Abbreviated Journal	Phys Rev Lett
	Volume	102	Issue	19	Pages	197003,1-197003,4
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	The discrete shell structure of vortex matter strongly influences the flux dynamics in mesoscopic superconducting Corbino disks. While the dynamical behavior is well understood in large and in very small disks, in the intermediate-size regime it occurs to be much more complex and unusual, due to (in)commensurability between the vortex shells. We demonstrate unconventional vortex dynamics (inversion of shell velocities with respect to the gradient driving force) and angular melting (propagating from the boundary where the shear stress is minimum, towards the center) in mesoscopic Corbino disks.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York, N.Y.	Editor
	Language		Wos	000266207700063	Publication Date	2009-05-14
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0031-9007;1079-7114;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	8.462	Times cited	18	Open Access
	Notes				Approved	Most recent IF: 8.462; 2009 IF: 7.328
	Call Number	UA @ lucian @ c:irua:77396			Serial	3800
Permanent link to this record



	Author	Connolly, M.R.; Milošević, M.V.; Bending, S.J.; Clem, J.R.; Tamegai, T.
	Title	Continuum vs. discrete flux behaviour in large mesoscopic Bi₂Sr₂CaCu₂O_8+\delta disks			Type	A1 Journal article
	Year	2009	Publication	Europhysics letters	Abbreviated Journal	Epl-Europhys Lett
	Volume	85	Issue	1	Pages	17008,1-17008,6
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	Scanning Hall probe and local Hall magnetometry measurements have been used to investigate flux distributions in large mesoscopic superconducting disks with sizes that lie near the crossover between the bulk and mesoscopic vortex regimes. Results obtained by directly mapping the magnetic induction profiles of the disks at different applied fields can be quite successfully fitted to analytic models which assume a continuous distribution of flux in the sample. At low fields, however, we do observe clear signatures of the underlying discrete vortex structure and can resolve the characteristic mesoscopic compression of vortex clusters in increasing magnetic fields. Even at higher fields, where single-vortex resolution is lost, we are still able to track configurational changes in the vortex patterns, since competing vortex orders impose unmistakable signatures on “local” magnetisation curves as a function of the applied field. Our observations are in excellent agreement with molecular-dynamics numerical simulations which lead us to a natural definition of the lengthscale for the crossover between discrete and continuum behaviours in our system.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Paris	Editor
	Language		Wos	000263692500029	Publication Date	2009-01-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0295-5075;1286-4854;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.957	Times cited	17	Open Access
	Notes				Approved	Most recent IF: 1.957; 2009 IF: 2.893
	Call Number	UA @ lucian @ c:irua:76306			Serial	495
Permanent link to this record



	Author	van den Broek, W.; Van Aert, S.; van Dyck, D.
	Title	A model based atomic resolution tomographic algorithm			Type	A1 Journal article
	Year	2009	Publication	Ultramicroscopy	Abbreviated Journal	Ultramicroscopy
	Volume	109	Issue	12	Pages	1485-1490
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab
	Abstract	Tomography with high angular annular dark field scanning transmission electron microscopy at atomic resolution can be greatly improved if one is able to take advantage of prior knowledge. In this paper we present a reconstruction technique that explicitly takes into account the microscope parameters and the atomic nature of the projected object. This results in a more accurate estimate of the atomic positions and in a good resistance to noise. The reconstruction is a maximum likelihood estimator of the object. Moreover, the limits to the precision have been explored, allowing for a prediction of the amount of expected noise in the reconstruction for a certain experimental setup. We believe that the proposed reconstruction technique can be generalized to other tomographic experiments.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000271840200010	Publication Date	2009-08-28
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0304-3991;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.843	Times cited	17	Open Access
	Notes				Approved	Most recent IF: 2.843; 2009 IF: 2.067
	Call Number	UA @ lucian @ c:irua:78588			Serial	2097
Permanent link to this record



	Author	Geurts, R.; Milošević, M.V.; Peeters, F.M.
	Title	Second generation of vortex-antivortex states in mesoscopic superconductors: stabilization by artificial pinning			Type	A1 Journal article
	Year	2009	Publication	Physical review : B : solid state	Abbreviated Journal	Phys Rev B
	Volume	79	Issue	17	Pages	174508,1-174508,5
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	Antagonistic symmetries of superconducting polygons and their induced multivortex states in a homogeneous magnetic field may lead to the appearance of antivortices in the vicinity of the superconducting/normal-state boundary (where mesoscopic confinement is particularly strong). Resulting vortex-antivortex (V-Av) molecules match the sample symmetry but are extremely sensitive to defects and fluctuations and remain undetected experimentally. Here we show that V-Av states can reappear deep in the superconducting state due to an array of perforations in a polygonal setting, surrounding a central hole. Such states are no longer caused by the symmetry of the sample but rather by pinning itself, which prevents the vortex-antivortex annihilation. As a result, even micron size, clearly spaced V-Av molecules can be stabilized in large mesoscopic samples.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lancaster, Pa	Editor
	Language		Wos	000266501100098	Publication Date	2009-05-06
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1098-0121;1550-235X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.836	Times cited	17	Open Access
	Notes				Approved	Most recent IF: 3.836; 2009 IF: 3.475
	Call Number	UA @ lucian @ c:irua:77399			Serial	2956
Permanent link to this record



	Author	Verlooy, P.; Aerts, A.; Lebedev, O.I.; Van Tendeloo, G.; Kirschhock, C.; Martens, J.A.
	Title	Synthesis of highly stable pure-silica thin-walled hexagonally ordered mesoporous material			Type	A1 Journal article
	Year	2009	Publication	Chemical communications	Abbreviated Journal	Chem Commun
	Volume		Issue	28	Pages	4287-4289
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Hexagonally ordered mesoporous silica with a very narrow mesopore size distribution and exceptionally high stability paired with unusually thin pore walls was prepared using piperidine and cetyltrimethylammonium bromide.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000267808000040	Publication Date	2009-06-09
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-7345;1364-548X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.319	Times cited	17	Open Access
	Notes				Approved	Most recent IF: 6.319; 2009 IF: 5.504
	Call Number	UA @ lucian @ c:irua:77684			Serial	3457
Permanent link to this record



	Author	Tarakina, N.V.; Denisova, T.A.; Maksimova, L.G.; Baklanova, Y.V.; Tyutyunnik, A.P.; Berger, I.F.; Zubkov, V.G.; Van Tendeloo, G.
	Title	Investigation of stacking disorder in Li₂SnO₃			Type	A1 Journal article
	Year	2009	Publication	Zeitschrift für Kristallographie	Abbreviated Journal
	Volume		Issue	S:30	Pages	375-380
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	A crystal structure investigation of the low temperature Li2SnO3 modification has been carried out. X-ray, neutron powder and electron diffraction data showed that this compound crystallizes in a monoclinic unit cell with parameters: a = 5.3033(2)Å, b = 9.1738(3)Å, c = 10.0195(2)Å, β ~ 100.042(2)º and has stacking disorder along the c-axis. Simulation of diffraction patterns with different stacking faults mainly reveal the presence of rotational stacking faults with a probability of about 40% .
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	München	Editor
	Language		Wos	000271325700024	Publication Date	2009-08-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0930-486X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	16	Open Access
	Notes	Iap			Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:79987			Serial	1735
Permanent link to this record



	Author	Vast, L.; Carpentier, L.; Lallemand, F.; Colomer, J.-F.; Van Tendeloo, G.; Fonseca, A.; Nagy, J.B.; Mekhalif, Z.; Delhalle, J.
	Title	Multiwalled carbon nanotubes functionalized with 7-octenyltrichlorosilane and n-octyltrichlorosilane: dispersion in Sylgard®184 silicone and Youngs modulus			Type	A1 Journal article
	Year	2009	Publication	Journal of materials science	Abbreviated Journal	J Mater Sci
	Volume	44	Issue	13	Pages	3476-3482
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Sylgard®184/multiwalled carbon nanotube (MWNT) composites have been prepared by in situ polymerization using purified and functionalized multiwalled carbon nanotubes (f-MWNTs) as fillers. Surface modification of the MWNTs has been carried out by silanization with 7-octenyltrichlorosilane (7OTCS) and n-octyltrichlorosilane (nOTCS). The modification and dispersion of the carbon nanotubes in composites were characterized by X-ray photoelectron spectroscopy (XPS), transmission electron spectroscopy (TEM), and high-resolution transmission electron spectroscopy (HRTEM). Youngs modulus results were derived from indentation testing. It is shown that the terminal-vinyl group of 7OTCS molecules plays an essential role for both the dispersion of the f-MWNTs in the composite and its mechanical properties. At loading as low as 0.2 wt%, the Youngs modulus is shown to increase up to 50%. This is interpreted as resulting from a combination of the good compatibility in the forming silicone matrix of the MWNTs coated with a siloxane network, on the one hand, and the covalent links created between the terminal-vinyl groups and the host matrix in formation, on the other hand.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000267153200022	Publication Date	2009-04-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-2461;1573-4803;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.599	Times cited	16	Open Access
	Notes	Iuap			Approved	Most recent IF: 2.599; 2009 IF: 1.471
	Call Number	UA @ lucian @ c:irua:77844			Serial	2245
Permanent link to this record



	Author	Resta, V.; Afonso, C.N.; Piscopiello, E.; Van Tendeloo, G.
	Title	Role of substrate on nucleation and morphology of gold nanoparticles produced by pulsed laser deposition			Type	A1 Journal article
	Year	2009	Publication	Physical review : B : solid state	Abbreviated Journal	Phys Rev B
	Volume	79	Issue	23	Pages	235409,1-235409,6
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	This work compares the morphology of gold nanoparticles (NPs) produced at room temperature on single-crystalline (MgO nanocubes and plates) and amorphous (carbon/glass plates) substrates by pulsed laser deposition (PLD). The results show that similar deposition and nucleation rates (>5×1013 cm−2 s−1) are achieved irrespective of the nature of the substrate. Instead, the shape of NPs is substrate dependent, i.e., quasispheres and faceted NPs in amorphous and single-crystalline substrates, respectively. The shape of the latter is octahedral for small NPs and truncated octahedral for large ones, with the degree of truncation being well explained using the Wulff-Kaichew theorem. Furthermore, epitaxial growth at room temperature is demonstrated for single-crystalline substrate. The large fraction of ions having energies higher than 200 eV and the large flux of species arriving to the substrate (1016 at. cm−2 s−1) involved in the PLD process are, respectively, found to be responsible for the high nucleation rates and epitaxial growth at room temperature.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lancaster, Pa	Editor
	Language		Wos	000267699500116	Publication Date	2009-06-10
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1098-0121;1550-235X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.836	Times cited	16	Open Access
	Notes				Approved	Most recent IF: 3.836; 2009 IF: 3.475
	Call Number	UA @ lucian @ c:irua:77692			Serial	2922
Permanent link to this record



	Author	de Backer, J.W.; Vos, W.G.; Burnell, P.; Verhulst, S.L.; Salmon, P.; de Clerck, N.; de Backer, W.
	Title	Study of the variability in upper and lower airway morphology in Sprague-Dawley rats using modern micro-CT scan-based segmentation techniques			Type	A1 Journal article
	Year	2009	Publication	The anatomical record: advances in integrative anatomy and evolutionary biology	Abbreviated Journal	Anat Rec
	Volume	292	Issue	5	Pages	720-727
	Keywords	A1 Journal article; Condensed Matter Theory (CMT); Laboratory Experimental Medicine and Pediatrics (LEMP)
	Abstract	Animal models are being used extensively in pre-clinical and safety assessment studies to assess the effectiveness and safety of new chemical entities and delivery systems. Although never entirely replacing the need for animal testing, the use of computer simulations could eventually reduce the amount of animals needed for research purposes and refine the data acquired from the animal studies. Computational fluid dynamics is a powerful tool that makes it possible to simulate flow and particle behavior in animal or patient-specific respiratory models, for purposes of inhaled delivery. This tool requires an accurate representation of the respiratory system, respiration and dose delivery attributes. The aim of this study is to develop a representative airway model of the Sprague-Dawley rat using static and dynamic micro-CT scans. The entire respiratory tract was modeled, from the snout and nares down to the central airways at the point where no distinction could be made between intraluminal air and the surrounding tissue. For the selection of the representative model, variables such as upper airway movement, segmentation length, airway volume and size are taken into account. Dynamic scans of the nostril region were used to illustrate the characteristic morphology of this region in anaesthetized animals. It could be concluded from this study that it was possible to construct a highly detailed representative model of a Sprague-Dawley rat based on imaging modalities such as micro-CT scans
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York, N.Y.	Editor
	Language		Wos	000265766000010	Publication Date	2009-03-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-8486;1932-8494;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.431	Times cited	16	Open Access
	Notes				Approved	Most recent IF: 1.431; 2009 IF: 1.490
	Call Number	UA @ lucian @ c:irua:76455			Serial	3342
Permanent link to this record



	Author	Neyts, E.C.; Bogaerts, A.
	Title	Formation of endohedral Ni@C60 and exohedral NiC60 metallofullerene complexes by simulated ion implantation			Type	A1 Journal article
	Year	2009	Publication	Carbon	Abbreviated Journal	Carbon
	Volume	47	Issue	4	Pages	1028-1033
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	The interaction of thermal and hyperthermal Ni ions with gas-phase C60 fullerene was investigated at two temperatures with classical molecular dynamics simulations using a recently developed interatomic many-body potential. The interaction between Ni and C60 is characterized in terms of the NiC60 binding sites, complex formation, and the collision and temperature induced deformation of the C60 cage structure. The simulations show how ion implantation theoretically allows the synthesis of both endohedral Ni@C60 and exohedral NiC60 metallofullerene complexes.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000264252900012	Publication Date	2008-12-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0008-6223;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.337	Times cited	15	Open Access
	Notes				Approved	Most recent IF: 6.337; 2009 IF: 4.504
	Call Number	UA @ lucian @ c:irua:76434			Serial	1260
Permanent link to this record