Home | << 1 2 3 4 5 6 7 8 9 10 11 12 >> |
![]() |
Records | |||||
---|---|---|---|---|---|
Author | Lu, J.; Bartholomeeusen, E.; Sels, B.F.; Schryvers, D. | ||||
Title | Internal architecture of coffin-shaped ZSM-5 zeolite crystals with hourglass contrast unravelled by focused ion beam-assisted transmission electron microscopy: INTERNAL ARCHITECTURE OF COFFIN-SHAPED | Type | A1 Journal article | ||
Year | 2017 | Publication | Journal of microscopy | Abbreviated Journal | J Microsc-Oxford |
Volume | 265 | Issue | 265 | Pages | 27-33 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | Optical microscopy, focused ion beam and transmission electron microscopy are combined to study the internal architecture in a coffin-shaped ZSM-5 crystal showing an hourglass contrast in optical microscopy. Based on parallel lamellas from different positions in the crystal, the orientation relationships between the intergrowth components of the crystal are studied and the internal architecture and growth mechanism are illustrated. The crystal is found to contain two pyramid-like components aside from a central component. Both pyramid-like components are rotated by 90 degrees along the common c-axis and with respect to the central component while the interfaces between the components show local zig-zag feature, the latter indicating variations in relative growth velocity of the two components. The pyramid-like intergrowth components are larger and come closer to one another in the middle of the crystal than at the edges, but they do not connect. A model of multisite nucleation and growth of 90 degrees intergrowth components is proposed. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000392487400004 | Publication Date | 2016-08-19 | |
Series Editor | Series Title ![]() |
Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0022-2720 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 1.692 | Times cited | 4 | Open Access | OpenAccess |
Notes | Fonds Wetenschappelijk Onderzoek, G.0603.10N ; | Approved | Most recent IF: 1.692 | ||
Call Number | EMAT @ emat @ c:irua:141015 | Serial | 4437 | ||
Permanent link to this record | |||||
Author | Ghidelli, M.; Idrissi, H.; Gravier, S.; Blandin, J.-J.; Raskin, J.-P.; Schryvers, D.; Pardoen, T. | ||||
Title | Homogeneous flow and size dependent mechanical behavior in highly ductile Zr 65 Ni 35 metallic glass films | Type | A1 Journal article | ||
Year | 2017 | Publication | Acta materialia | Abbreviated Journal | Acta Mater |
Volume | 131 | Issue | 131 | Pages | 246-259 |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | Motivated by recent studies demonstrating a high strength – high ductility potential of nano-scale metallic glass samples, the mechanical response of freestanding Zr65Ni35 film with sub-micron thickness has been investigated by combining advanced on-chip tensile testing and electron microscopy. Large deformation up to 15% is found for specimen thicknesses below 500 nm with variations depending on specimen size and frame compliance. The deformation is homogenous until fracture, with no evidence of shear banding. The yield stress is doubled when decreasing the specimen cross-section, reaching ~3 GPa for small cross-sections. The fracture strain variation is related to both the stability of the test device and to the specimen size. The study concludes on clear disconnect between the mechanisms controlling the onset of plasticity and the fracture process. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000402343400023 | Publication Date | 2017-03-31 | |
Series Editor | Series Title ![]() |
Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1359-6454 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 5.301 | Times cited | 42 | Open Access | OpenAccess |
Notes | This work has been funded by the Belgian Science Policy through the IAP 7/21 project. We acknowledge IDS-FunMat for the PhD financial support.We thank the Renatech network and the PTA (Plateforme Technologique Amont) in Grenoble (France) for TFMG deposition facilities. The WINFAB infrastructure at the UCL and the help of R. Vayrette and M. Coulombier for the on-chip tests. H. Idrissi is currently mandated by the Belgian National Fund for Scientific Research (FSR-FNRS). | Approved | Most recent IF: 5.301 | ||
Call Number | EMAT @ emat @ c:irua:142642 | Serial | 4562 | ||
Permanent link to this record | |||||
Author | Lambrinou, K.; Charalampopoulou, E.; Van der Donck, T.; Delville, R.; Schryvers, D. | ||||
Title | Dissolution corrosion of 316L austenitic stainless steels in contact with static liquid lead-bismuth eutectic (LBE) at 500 °C | Type | A1 Journal article | ||
Year | 2017 | Publication | Journal of nuclear materials | Abbreviated Journal | J Nucl Mater |
Volume | 490 | Issue | 490 | Pages | 9-27 |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | This work addresses the dissolution corrosion behaviour of 316L austenitic stainless steels. For this purpose, solution-annealed and cold-deformed 316L steels were simultaneously exposed to oxygen-poor (<10-8 mass%) static liquid lead-bismuth eutectic (LBE) for 253e3282 h at 500 °C. Corrosion was consistently more severe for the cold-drawn steels than the solution-annealed steel, indicating the importance of the steel thermomechanical state. The thickness of the dissolution-affected zone was nonuniform, and sites of locally-enhanced dissolution were occasionally observed. The progress of LBE dissolution attack was promoted by the interplay of certain steel microstructural features (grain boundaries, deformation twin laths, precipitates) with the dissolution corrosion process. The identified dissolution mechanisms were selective leaching leading to steel ferritization, and non-selective leaching; the latter was mainly observed in the solution-annealed steel. The maximum corrosion rate decreased with exposure time and was found to be inversely proportional to the depth of dissolution attack. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000403132300002 | Publication Date | 2017-04-10 | |
Series Editor | Series Title ![]() |
Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0022-3115 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 2.048 | Times cited | 24 | Open Access | OpenAccess |
Notes | The authors would like to acknowledge the following 316L stainless steel suppliers: Industeel, ArcelorMittal Group, for the 316LSA plate procured and characterised in the FP6 EUROTRANSDEMETRA project (Contract no. FI6W-CT-2004-516520); OLARRA Aceros Inoxidables, Spain, for the 316LH1 rod; and SIDERO STAAL nv, Belgium, for the 316LH2 rod. K. Lambrinou would like to thank J. Joris for technical support during the launching and follow up of all corrosion tests, J. Lim for the manufacturing and calibration of the oxygen sensors used in these tests, T. Lapauw for the XRD measurements on the pristine steels, and S. Van den Broeck for the FIB sample preparation. Special thanks to S. Gavrilov for fruitful and intense discussions. The authors gratefully acknowledge the funding provided in the framework of the ongoing development of the MYRRHA irradiation facility. The research leading to these results falls within the framework of the European Energy Research Alliance Joint Programme on Nuclear Materials (EERA JPNM). | Approved | Most recent IF: 2.048 | ||
Call Number | EMAT @ emat @ c:irua:142644 | Serial | 4563 | ||
Permanent link to this record | |||||
Author | Pourbabak, S.; Wang, X.; Van Dyck, D.; Verlinden, B.; Schryvers, D. | ||||
Title | Ni cluster formation in low temperature annealed Ni50.6Ti49.4 | Type | A1 Journal article | ||
Year | 2017 | Publication | Functional materials letters | Abbreviated Journal | Funct Mater Lett |
Volume | 10 | Issue | 10 | Pages | 1740005 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab | ||||
Abstract | Various low temperature treatments of Ni50.6Ti49.4 have shown an unexpected effect on the martensitic start temperature. Periodic diffuse intensity distributions in reciprocal space indicate the formation of short pure Ni strings along the <111> directions in the B2 ordered lattice, precursing the formation of Ni4Ti3 precipitates formed at higher annealing temperatures. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000395164100006 | Publication Date | 2017-01-10 | |
Series Editor | Series Title ![]() |
Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1793-6047 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 1.234 | Times cited | 4 | Open Access | Not_Open_Access |
Notes | The authors like to thank the Flemish Science Foundation FWO for financial support under project G.0366.15N “Influence of nano- and microstructural features and defects in fine-grained Ni-Ti on the thermal and mechanical reversibility of the martensitic transformation and the shape memory and superelastic behavior”. We are also very grateful to Prof. Dr. Jan Van Humbeeck for initiating this work, for his continuous support and inspiring discussions. | Approved | Most recent IF: 1.234 | ||
Call Number | EMAT @ emat @ c:irua:142545 | Serial | 4619 | ||
Permanent link to this record | |||||
Author | Grieten, E.; Schalm, O.; Tack, P.; Bauters, S.; Storme, P.; Gauquelin, N.; Caen, J.; Patelli, A.; Vincze, L.; Schryvers, D. | ||||
Title | Reclaiming the image of daguerreotypes: Characterization of the corroded surface before and after atmospheric plasma treatment | Type | A1 Journal article | ||
Year | 2017 | Publication | Journal of cultural heritage | Abbreviated Journal | J Cult Herit |
Volume | Issue | Pages | |||
Keywords | A1 Journal article; Art; History; Electron microscopy for materials research (EMAT); Antwerp Cultural Heritage Sciences (ARCHES) | ||||
Abstract | Technological developments such as atmospheric plasma jets for industry can be adapted for the conservation of cultural heritage. This application might offer a potential method for the removal or transformation of the corrosion on historical photographs. We focus on daguerreotypes and present an in-depth study of the induced changes by a multi-analytical approach using optical microscopy, scanning electron microscopy, different types of transmission electron microscopy and X-ray absorption fine structure. The H2-He afterglow removes S from an Ag2S or Cu2S layer which results in a nano-layer of metallic Ag or Cu on top of the deteriorated microstructure. In case the corrosion layer is composed of Cu-Ag-S compounds, our proposed setup can be used to partially remove the corrosion. These alterations of the corrosion results in an improvement in the readability of the photographic image. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000414230700007 | Publication Date | 2017-06-16 | |
Series Editor | Series Title ![]() |
Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1296-2074 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 1.838 | Times cited | 9 | Open Access | Not_Open_Access |
Notes | The authors thank Herman Maes for the daguerreotypes used in this study. The authors also acknowledge the opportunity to perform XAFS measurements at the DUBBLE beamline of the ESRF storage ring under the approval of the advisory Committee (beam time nr. 26-01-990) and acknowledge the DUBBLE beamline staff for their support. They are also grateful for the financial support by the EU-FP7 grant PANNA no. 282998 and the STIMPRO project FFB150215 of the University of Antwerp. Pieter Tack is funded by a Ph.D. grant of the Agency for Innovation by Science and Technology (IWT). | Approved | Most recent IF: 1.838 | ||
Call Number | EMAT @ emat @c:irua:144430 | Serial | 4625 | ||
Permanent link to this record | |||||
Author | Schryvers, D.; Salje, E.K.H.; Nishida, M.; De Backer, A.; Idrissi, H.; Van Aert, S. | ||||
Title | Quantification by aberration corrected (S)TEM of boundaries formed by symmetry breaking phase transformations | Type | A1 Journal article | ||
Year | 2017 | Publication | Ultramicroscopy | Abbreviated Journal | Ultramicroscopy |
Volume | 176 | Issue | Pages | 194-199 | |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | The present contribution gives a review of recent quantification work of atom displacements, atom site occupations and level of crystallinity in various systems and based on aberration corrected HR(S)TEM images. Depending on the case studied, picometer range precisions for individual distances can be obtained, boundary widths at the unit cell level determined or statistical evolutions of fractions of the ordered areas calculated. In all of these cases, these quantitative measures imply new routes for the applications of the respective materials. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000403992200026 | Publication Date | 2017-01-09 | |
Series Editor | Series Title ![]() |
Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0304-3991 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 2.843 | Times cited | 1 | Open Access | OpenAccess |
Notes | The authors acknowledge financial support from the Fund for Scientific Research-Flanders (G.0064.10N, G.0393.11N, G.0374.13N, G.0368.15N, G.0369.15N) and the Flemish Hercules 3 program for large infrastructure as well as financial support from the European Union Seventh Framework Programme (FP7/2007 – 2013) under Grant agreement no. 312483 (ESTEEM2). EKHS thanks EPSRC (EP/ K009702/1) and the Leverhulme trust (EM-2016-004) for support. DS and MN acknowledge financial support from the Japan Society for the Promotion of Science (JSPS, Japan) through the Grant-in-Aid for Scientific Research (A: No. 26249090) and the Strategic Young Researcher Overseas Visits Program for Accelerating Brain Circulation (R2408). | Approved | Most recent IF: 2.843 | ||
Call Number | EMAT @ emat @c:irua:149654 | Serial | 4914 | ||
Permanent link to this record | |||||
Author | Radi, A.; Khalil-Allafi, J.; Etminanfar, M.R.; Pourbabak, S.; Schryvers, D.; Amin-Ahmadi, B. | ||||
Title | Influence of stress aging process on variants of nano-N4Ti3precipitates and martensitic transformation temperatures in NiTi shape memory alloy | Type | A1 Journal article | ||
Year | 2018 | Publication | Materials & design | Abbreviated Journal | Mater Design |
Volume | 262 | Issue | 262 | Pages | 74-81 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | In this study, the effect of a stress aging process on the microstructure and martensitic phase transformation of NiTi shape memory alloy has been investigated. NiTi samples were aged at 450 degrees C for 1 h and 5 h under different levels of external tensile stress of 15, 60 and 150 MPa. Transmission electron microscopy (TEM) was used to characterize different variants and morphology of precipitates. The results show that application of all stress levels restricts the formation of precipitates variants in the microstructure after I h stress aging process. However, all variants can be detected by prolonging aging time to 5 h at 15 MPa stress level and the variants formation is again restricted by increasing the stress level. Moreover, the stress aging process resulted in changing the shape of precipitates in comparison with that of the stress-free aged samples. Coffee-bean shaped morphologies were detected for precipitates in all stress levels. According to the Differential Scanning Calorimetry (DSC) results, the martensite start temperature (M-s) on cooling shifts to higher temperatures with increasing the tensile stress during the aging process. This can be related to the change ofaustenite to martensite interface energy due to the different volume fractions and variants of precipitates. (c) 2018 Elsevier Ltd. All rights reserved. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | Publication Date | 2018-01-04 | ||
Series Editor | Series Title ![]() |
Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0264-1275 | ISBN | Additional Links | UA library record; ; WoS full record; WoS citing articles | |
Impact Factor | 4.364 | Times cited | Open Access | OpenAccess | |
Notes | Approved | Most recent IF: 4.364 | |||
Call Number | UA @ lucian @ c:irua:149854 | Serial | 4938 | ||
Permanent link to this record | |||||
Author | Du, C.; Hoefnagels, J.P.M.; Kolling, S.; Geers, M.G.D.; Sietsma, J.; Petrov, R.; Bliznuk, V.; Koenraad, P.M.; Schryvers, D.; Amin-Ahmadi, B. | ||||
Title | Martensite crystallography and chemistry in dual phase and fully martensitic steels | Type | A1 Journal article | ||
Year | 2018 | Publication | Materials characterization | Abbreviated Journal | Mater Charact |
Volume | 139 | Issue | Pages | 411-420 | |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | Lath martensite is important in industry because it is the key strengthening component in many advanced high strength steels. The study of crystallography and chemistry of lath martensite is extensive in the literature, however, mostly based on fully martensitic steels. In this work, lath martensite in dual phase steels is investigated with a focus on the substructure identification of the martensite islands and microstructural bands using electron backscattered diffraction, and on the influence of the accompanied tempering process during industrial coating process on the distribution of alloying elements using atom probe tomography. Unlike findings for the fully martensitic steels, no martensite islands with all 24 Kurdjumov-Sachs variants have been observed. Almost all martensite islands contain only one main packet with all six variants and minor variants from the remaining three packets of the same prior austenite grain. Similarly, the martensite bands are typically composed of connected domains originating from prior austenite grains, each containing one main packets (mostly with all variants) and few separate variants. The effect of tempering at similar to 450 degrees C (due to the industrial zinc coating process) has also been investigated. The results show a strong carbon partitioning to lath boundaries and Cottrell atmospheres at dislocation core regions due to the thermal process of coating. In contrast, auto-tempering contributes to the carbon redistribution only in a limited manner. The substitutional elements are all homogenously distributed. The phase transformation process has two effects on the material: mechanically, the earlier-formed laths are larger and softer and therefore more ductile (as revealed by nanoindentation); chemically, due to the higher dislocation density inside the later-formed laths, which are generally smaller, carbon Cottrell atmospheres are predominantly observed. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | New York | Editor | ||
Language | Wos | 000431469300044 | Publication Date | 2018-03-09 | |
Series Editor | Series Title ![]() |
Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1044-5803 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 2.714 | Times cited | Open Access | Not_Open_Access | |
Notes | Approved | Most recent IF: 2.714 | |||
Call Number | UA @ lucian @ c:irua:151554 | Serial | 5033 | ||
Permanent link to this record | |||||
Author | Cautaerts, N.; Delville, R.; Stergar, E.; Schryvers, D.; Verwerft, M. | ||||
Title | Tailoring the Ti-C nanoprecipitate population and microstructure of titanium stabilized austenitic steels | Type | A1 Journal article | ||
Year | 2018 | Publication | Journal of nuclear materials | Abbreviated Journal | J Nucl Mater |
Volume | 507 | Issue | 507 | Pages | 177-187 |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | The present work reports on the microstructural evolution of a new heat of 24% cold worked austenitic DIN 1.4970 (15-15Ti) nuclear cladding steel subjected to ageing heat treatments of varying duration between 500 and 800 degrees C (by steps of 100 degrees C). The primary aim was studying the finely dispersed Ti-C nanoprecipitate population, which are thought to be beneficial for creep and swelling resistance during service. Their size distribution and number density were estimated through dark field imaging and bright field Moire imaging techniques in the transmission electron microscope. Nanoprecipitates formed at and above 600 degrees C, which is a lower temperature than previously reported. The observed nucleation, growth and coarsening behavior of the nanoprecipitates were consistent with simple diffusion arguments. The formation of nanoprecipitates coincided with significant dissociation of dislocations as evidenced by weak beam dark field imaging. Possible mechanisms, including Silcock's stacking fault growth model and Suzuki segregation, are discussed. Recrystallization observed after extended ageing at 800 degrees C caused the redissolution of nanoprecipitates. Large primary Ti(C,N) and (Ti,Mo)C precipitates that occur in the as-received material, and M23C6 precipitates that nucleate on grain boundaries at low temperatures were also characterized by a selective dissolution procedure involving filtration, X-ray diffraction and quantitative Rietveld refinement. The partitioning of key elements between the different phases was derived by combining these findings and was consistent with thermodynamic considerations and the processing history of the steel. (C) 2018 Elsevier B.V. All rights reserved. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Amsterdam | Editor | ||
Language | Wos | 000438019800021 | Publication Date | 2018-04-30 | |
Series Editor | Series Title ![]() |
Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0022-3115 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 2.048 | Times cited | 1 | Open Access | Not_Open_Access |
Notes | ; We would like to acknowledge ENGIE, SCK.CEN, the SCK.CEN academy and the MYRRHA project for the financial support of this work. Special thanks to T. Wangle and P. Dries for their help with filtration and gravimetry. Also thanks to Dr. G. Leinders for the discussions on XRD and Rietveld refinement. Thanks to E. Charalampopoulou and A. Youssef for assisting with the dissolution experiments. ; | Approved | Most recent IF: 2.048 | ||
Call Number | UA @ lucian @ c:irua:152382 | Serial | 5043 | ||
Permanent link to this record | |||||
Author | Guzzinati, G.; Altantzis, T.; Batuk, M.; De Backer, A.; Lumbeeck, G.; Samaee, V.; Batuk, D.; Idrissi, H.; Hadermann, J.; Van Aert, S.; Schryvers, D.; Verbeeck, J.; Bals, S. | ||||
Title | Recent Advances in Transmission Electron Microscopy for Materials Science at the EMAT Lab of the University of Antwerp | Type | A1 Journal article | ||
Year | 2018 | Publication | Materials | Abbreviated Journal | Materials |
Volume | 11 | Issue | 11 | Pages | 1304 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | The rapid progress in materials science that enables the design of materials down to the nanoscale also demands characterization techniques able to analyze the materials down to the same scale, such as transmission electron microscopy. As Belgium’s foremost electron microscopy group, among the largest in the world, EMAT is continuously contributing to the development of TEM techniques, such as high-resolution imaging, diffraction, electron tomography, and spectroscopies, with an emphasis on quantification and reproducibility, as well as employing TEM methodology at the highest level to solve real-world materials science problems. The lab’s recent contributions are presented here together with specific case studies in order to highlight the usefulness of TEM to the advancement of materials science. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000444112800041 | Publication Date | 2018-07-28 | |
Series Editor | Series Title ![]() |
Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1996-1944 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 2.654 | Times cited | 15 | Open Access | OpenAccess |
Notes | Fonds Wetenschappelijk Onderzoek, G.0502.18N, G.0267.18N, G.0120.12N, G.0365.15N, G.0934.17N, S.0100.18N AUHA13009 ; European Research Council, COLOURATOM 335078 ; Universiteit Antwerpen, GOA Solarpaint ; G. Guzzinati, T. Altantzis and A. De Backer have been supported by postdoctoral fellowship grants from the Research Foundation Flanders (FWO). Funding was also received from the European Research Council (starting grant no. COLOURATOM 335078), the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement no. 770887), the Research Foundation Flanders (FWO, Belgium) through project fundings (G.0502.18N, G.0267.18N, G.0120.12N, G.0365.15N, G.0934.17N, S.0100.18N, G.0401.16N) and from the University of Antwerp through GOA project Solarpaint. Funding for the TopSPIN precession system under grant AUHA13009, as well as for the Qu-Ant-EM microscope, is acknowledged from the HERCULES Foundation. H. Idrissi is mandated by the Belgian National Fund for Scientific Research (F.R.S.-FNRS). (ROMEO:green; preprint:; postprint:can ; pdfversion:can); saraecas; ECAS_Sara; | Approved | Most recent IF: 2.654 | ||
Call Number | EMAT @ emat @c:irua:153737UA @ admin @ c:irua:153737 | Serial | 5064 | ||
Permanent link to this record | |||||
Author | Jimenez-Mena, N.; Jacques, P.J.; Ding, L.; Gauquelin, N.; Schryvers, D.; Idrissi, H.; Delannay, F.; Simar, A. | ||||
Title | Enhancement of toughness of Al-to-steel Friction Melt Bonded welds via metallic interlayers | Type | A1 Journal article | ||
Year | 2019 | Publication | Materials science and engineering: part A: structural materials: properties, microstructure and processing | Abbreviated Journal | Mat Sci Eng A-Struct |
Volume | 740-741 | Issue | Pages | 274-284 | |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | The toughness of Al-to-steel welds decreases with increasing thickness of the intermetallic (IM) layer formed at the interface. Co plating has been added as interlayer in Al-to-steel Friction Melt Bonded (FMB) welds to control the nature and thickness of the IM layer. In comparison to a weld without interlayer, Co plating brings about a reduction of the thickness of the IM layer by 70%. The critical energy release rate of the crack propagating in the weld is used as an indicator of toughness. It is evaluated via an adapted crack propagation test using an energy conservation criterion. For a weld without interlayer, critical energy release rate is found to increase when the thickness of the intermetallic layer decreases. When the intermetallic layer is thick, the crack propagates in a brittle manner through the intermetallic whereas, at low layer thickness, the crack deviates and partially propagates through the Al plate, which causes an increase of toughness. The use of a Co interlayer brings about an increase of toughness by causing full deviation of the crack towards the Al plate. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000453494500029 | Publication Date | 2018-10-24 | |
Series Editor | Series Title ![]() |
Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0921-5093 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 3.094 | Times cited | 4 | Open Access | Not_Open_Access: Available from 25.10.2020 |
Notes | The authors acknowledge the financial support of the Interuniversity Attraction Poles Program from the Belgian State through the Belgian Policy Agency, Belgium, contract IAP7/21 INTEMATE. N. Jimenez-Mena acknowledges the financial support of the (Fonds pour la formation à la recherchedans l'industrie et dans l'agriculture (FRIA), Belgium. A. Simar acknowledges the financial support of the (European Research Council – Starting Grant (ERC-StG), project ALUFIX, grant agreement no 716678. H. Idrissi is mandated by the Belgian National Fund for Scientific Research (FSR-FNRS), Belgium. The authors also acknowledge M. Coulombier for the help provided in the measurement of the friction coefficient, and T. Pardoen and F. Lani for the fruitful discussions. | Approved | Most recent IF: 3.094 | ||
Call Number | EMAT @ emat @c:irua:154866UA @ admin @ c:irua:154866 | Serial | 5061 | ||
Permanent link to this record | |||||
Author | Cautaerts, N.; Delville, R.; Stergar, E.; Schryvers, D.; Verwerft, M. | ||||
Title | Characterization of (Ti,Mo,Cr)C nanoprecipitates in an austenitic stainless steel on the atomic scale | Type | A1 Journal article | ||
Year | 2019 | Publication | Acta materialia | Abbreviated Journal | Acta Mater |
Volume | 164 | Issue | Pages | 90-98 | |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | Nanometer sized (Ti,Mo,Cr)C (MX-type) precipitates that grew in a 24% cold worked Ti-stabilized austenitic stainless steel (grade DIN 1.4970, member of the 15-15Ti austenitic stainless steels) after heat treatment were fully characterized with transmission electron microscopy (TEM), probe corrected high angle annular dark field scanning transmission electron microscopy (HR-HAADF STEM), and atom probe tomography (APT). The precipitates shared the cube-on-cube orientation with the matrix and were facetted on {111} planes, yielding octahedral and elongated octahedral shapes. The misfit dislocations were believed to have Burgers vectors a/6<112> which was verified by geometrical phase analysis (GPA) strain mapping of a matrix-precipitate interface. The dislocations were spaced five to seven atomic planes apart, on average slightly wider than expected for the lattice parameters of steel and TiC. Quantitative atom probe tomography analysis of the precipitates showed that precipitates were significantly enriched in Mo, Cr and V, and that they were hypostoichiometric with respect to C. These findings were consistent with a reduced lattice parameter. The precipitates were found primarily on Shockley partial dislocations originating from the original perfect dislocation network. These novel findings could contribute to the understanding of how TiC nanoprecipitates interact with point defects and matrix dislocations. This is essential for the application of these Ti-stabilized steels in high temperature environments or fast spectrum nuclear fission reactors. |
||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000456902800008 | Publication Date | 2018-10-11 | |
Series Editor | Series Title ![]() |
Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1359-6454 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 5.301 | Times cited | 2 | Open Access | Not_Open_Access: Available from 12.10.2020 |
Notes | This work was supported by ENGIE [contract number 2015-AC- 007 e BSUEZ6900]; the U.S. Department of Energy, Office of Nuclear Energy under DOE Idaho Operations Office Contract DE-AC07- 051D14517 as part of a Nuclear Science User Facilities experiment; and by the MYRRHA program in development at SCKCEN, Belgium. Special thanks to Dr. H. Mezerji and Dr. T. Altantzis for the work on the FEI Titan microscope.We also want to thank Ms. J. Burns for the help on the FIB and Dr. Y. Wu at CAES for conducting the APT measurements. | Approved | Most recent IF: 5.301 | ||
Call Number | EMAT @ emat @c:irua:154873UA @ admin @ c:irua:154873 | Serial | 5060 | ||
Permanent link to this record | |||||
Author | Ding, L.; Orekhov, A.; Weng, Y.; Jia, Z.; Idrissi, H.; Schryvers, D.; Muraishi, S.; Hao, L.; Liu, Q. | ||||
Title | Study of the Q′ (Q)-phase precipitation in Al–Mg–Si–Cu alloys by quantification of atomic-resolution transmission electron microscopy images and atom probe tomography | Type | A1 Journal article | ||
Year | 2019 | Publication | Journal of materials science | Abbreviated Journal | J Mater Sci |
Volume | 54 | Issue | 10 | Pages | 7943-7952 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | The precipitation mechanism of the Q phase in Al-Mg-Si-Cu alloys has long been the subject of ambiguity and debate since its metastable phase (Q 0) has the same crystal structure and similar lattice parameters as its equilibrium counterparts. In the present work, the evolution of the Q 0 (Q) phase during aging is studied by combination of quantitative atomic-resolution scanning transmission electron microscopy and atom probe tomography. It was found that the transformation from the Q 0 to the Q phase involves changes of the occupancy of Al atoms in atomic columns of the Q 0 (Q) phase. The Al atoms incorporated in the Cu, Si and Mg columns are gradually released into the Al matrix, while mixing between Cu and Si atoms occurs in the Si columns. This transformation process is mainly attributed to the low lattice misfit of the equilibrium Q phase. Besides, the formation of various compositions of the Q phase is due to the different occupancy in the atomic columns of the Q phase. The occupancy changes in the columns of the Q phase are kinetically controlled and are strongly influenced by the alloy composition and aging temperature. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000460069500043 | Publication Date | 2019-02-14 | |
Series Editor | Series Title ![]() |
Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0022-2461 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 2.599 | Times cited | 1 | Open Access | Not_Open_Access |
Notes | Special major R & D Projects for Key Technology Innovation of Key Industries in Chongqing, cstc2017zdcy-zdzxX0006 ; Fundamental Research Funds for the Central Universities of China, 2018CDGFCL0002 106112017CDJQJ308822 ; Belgian National Fund for Scientific Research; the National Natural Science Foundation of China, 51871035 ; This work was supported by the Special major R & D Projects for Key Technology Innovation of Key Industries in Chongqing (Grant No. cstc2017zdcyzdzxX0006), the Fundamental Research Funds for the Central Universities of China (Grant No. 2018CDGFCL0002), the National Natural Science Foundation of China (Grant No. 51871035) and the Foundation for Innovative Research Groups J Mater Sci National Natural Science Foundation of China (Grant No. 51421001). H. Idrissi is mandated by the Belgian National Fund for Scientific Research (FSR-FNRS). | Approved | Most recent IF: 2.599 | ||
Call Number | EMAT @ emat @UA @ admin @ c:irua:158112 | Serial | 5158 | ||
Permanent link to this record | |||||
Author | Miotti Bettanini, A.; Ding, L.; Mithieux, J.-D.; Parrens, C.; Idrissi, H.; Schryvers, D.; Delannay, L.; Pardoen, T.; Jacques, P.J. | ||||
Title | Influence of M23C6 dissolution on the kinetics of ferrite to austenite transformation in Fe-11Cr-0.06C stainless steel | Type | A1 Journal article | ||
Year | 2019 | Publication | Materials & design | Abbreviated Journal | Mater Design |
Volume | 162 | Issue | Pages | 362-374 | |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | The design of high-strength martensitic stainless steels requires an accurate control over the stability of undesired phases, like carbides and ferrite, which can hamper strength and ductility. Here, the ferrite to austenite transformation in Fe-11Cr-0.06C has been studied with a combined experimental-modelling approach. Experimental observations of the austenization process indicate that austenite growth proceeds in multiple steps, each one characterized by a different transformation rate. DICTRA based modelling reveals that the dissolution of the M23C6 Cr-rich carbides leads to Cr partitioning between austenite and parent phases, which controls the rate of transformation through (i) a soft-impingement effect and (ii) consequent stabilization of the ferrite, which remains untransformed inside chromium-enriched-zones even after prolonged austenization stage. Slow heating rate and smaller initial particle sizes allow the design of ferrite-free microstructure. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000454128400036 | Publication Date | 2018-12-06 | |
Series Editor | Series Title ![]() |
Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0264-1275 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 4.364 | Times cited | 3 | Open Access | OpenAccess |
Notes | The authors thank Professor Anne-Francoise Gourgues-Lorenzon and Helene Godin, Ecole Nationale Superiore des Mines de Paris (MINES ParisTech) for their fruitful discussions. AMB thanks Stijn Van den broek (Universiteit Antwerpen) for the skillful preparation of TEM samples with FIB. The financial support of CBMM (Companhia Brasileira de Metalurgia e Mineracao) is gratefully acknowledged. L. Delannay is mandated by the FNRS-Belgium. Computational resources have been provided by the supercomputing facilities of the UCLouvain (CISM/UCL) and the Consortium des Equipements de Calcul Intensif en Federation Wallonie Bruxelles (CÉCI) funded by the Fond de la Recherche Scientifique de Belgique (F.R.S.-FNRS) under convention 2.5020.11.; Cbmm; F.r.s.-fnrs, 2.5020.11 ; | Approved | Most recent IF: 4.364 | ||
Call Number | EMAT @ emat @UA @ admin @ c:irua:156721 | Serial | 5161 | ||
Permanent link to this record | |||||
Author | Cautaerts, N.; Delville, R.; Schryvers, D. | ||||
Title | ALPHABETA: a dedicated open-source tool for calculating TEM stage tilt angles | Type | A1 Journal article | ||
Year | 2019 | Publication | Journal of microscopy | Abbreviated Journal | J Microsc-Oxford |
Volume | 273 | Issue | 3 | Pages | 189-198 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | |||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000458426100004 | Publication Date | 2018-12-24 | |
Series Editor | Series Title ![]() |
Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0022-2720 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 1.692 | Times cited | 2 | Open Access | Not_Open_Access |
Notes | ENGIE Ph.D. sponsorship, 2015-AC-007 – BSUEZ6900 ; | Approved | Most recent IF: 1.692 | ||
Call Number | EMAT @ emat @UA @ admin @ c:irua:157474 | Serial | 5163 | ||
Permanent link to this record | |||||
Author | Charalampopoulou, E.; Delville, R.; Verwerft, M.; Lambrinou, K.; Schryvers, D. | ||||
Title | Transmission electron microscopy study of complex oxide scales on DIN 1.4970 steel exposed to liquid Pb-Bi eutectic | Type | A1 Journal article | ||
Year | 2019 | Publication | Corrosion science | Abbreviated Journal | Corrosion Science |
Volume | 147 | Issue | Pages | 22-31 | |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | The deployment of Gen-IV lead-cooled fast reactors requires a good compatibility between the selected structural/cladding steels and the inherently corrosive heavy liquid metal coolant. An effective liquid metal corrosion mitigation strategy involves the in-situ steel passivation in contact with the oxygen-containing Pb-alloy coolant. Transmission electron microscopy was used in this work to study the multi-layered oxide scales forming on an austenitic stainless steel fuel cladding exposed to oxygen-containing (CO ≈ 10−6 mass%) static liquid leadbismuth eutectic (LBE) for 1000 h between 400 and 500 °C. The oxide scale constituents were analyzed, including the intertwined phases comprising the innermost biphasic layer. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000456902100003 | Publication Date | 2018-10-31 | |
Series Editor | Series Title ![]() |
Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0010938X | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | Times cited | 5 | Open Access | OpenAccess | |
Notes | The authors would like to thank J. Joris for the technical support during corrosion testing and J. Lim for the manufacturing and calibration of the oxygen sensors and oxygen pumps used in this work. E. Charalampopoulou personally thanks H. Heidari, S. Pourbabak, A. Orekhov (EMAT) and N. Cautaerts (EMAT, SCK•CEN), for their valuable help with the training of the FEI Tecnai Osiris S/TEM and Jeol 3000 S/ TEM, respectively, as well as S. Van den Broeck (EMAT), J. Pakarinen (SCK•CEN) and W. Van Renterghem (SCK•CEN) for FIB sample preparation. Moreover, the authors gratefully acknowledge the funding provided in the framework of the ongoing development of the MYRRHA irradiation facility. The research leading to these results falls within the framework of the European Energy Research Alliance Joint Programme on Nuclear Materials (EERA JPNM). | Approved | Most recent IF: NA | ||
Call Number | EMAT @ emat @UA @ admin @ c:irua:157541 | Serial | 5164 | ||
Permanent link to this record | |||||
Author | Montero-Sistiaga, M.L.; Pourbabak, S.; Van Humbeeck, J.; Schryvers, D.; Vanmeensel, K. | ||||
Title | Microstructure and mechanical properties of Hastelloy X produced by HP-SLM (high power selective laser melting) | Type | A1 Journal article | ||
Year | 2019 | Publication | Materials & design | Abbreviated Journal | Mater Design |
Volume | 165 | Issue | Pages | 107598 | |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | In order to increase the production rate during selective laser melting (SLM), a high power laser with a large beam diameter is used to build fully dense Hastelloy X parts. Compared to SLM with a low power and small diameter beam, the productivity was increased from 6 mm3/s to 16 mm3/s, i.e. 2.6 times faster. Besides the productivity benefit, the influence of the use of a high power laser on the rapid solidification microstructure and concomitant material properties is highlighted. The current paper compares the microstructure and tensile properties of Hastelloy X built with low and high power lasers. The use of a high power laser results in wider and shallower melt pools inducing an enhanced morphological and crystallographic texture along the building direction (BD). In addition, the increased heat input results in coarser sub-grains or high density dislocation walls for samples processed with a high power laser. Additionally, the influence of hot isostatic pressing (HIP) as a post-processing technique was evaluated. After HIP, the tensile fracture strain increased as compared to the strain in the as-built state and helped in obtaining competitive mechanical properties as compared to conventionally processed Hastelloy X parts. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000458259300020 | Publication Date | 2019-01-09 | |
Series Editor | Series Title ![]() |
Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0264-1275 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 4.364 | Times cited | 15 | Open Access | OpenAccess |
Notes | This research was supported by the ENGIE Research and Technology Division. The authors acknowledge ENGIE Research and Technology Division for the use of the SLM280HL machine. S.P. likes to thank the Flemish Science Foundation FWO for financial support under Project G.0366.15N. | Approved | Most recent IF: 4.364 | ||
Call Number | EMAT @ emat @UA @ admin @ c:irua:157469 | Serial | 5176 | ||
Permanent link to this record | |||||
Author | Pourbabak, S.; Orekhov, A.; Samaee, V.; Verlinden, B.; Van Humbeeck, J.; Schryvers, D. | ||||
Title | In-Situ TEM Stress Induced Martensitic Transformation in Ni50.8Ti49.2 Microwires | Type | A1 Journal article | ||
Year | 2019 | Publication | Shape memory and superelasticity | Abbreviated Journal | Shap. Mem. Superelasticity |
Volume | 5 | Issue | 2 | Pages | 154-162 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | In-situ transmission electron microscopy tensile straining is used to study the stress induced martensitic transformation in Ni50.8Ti49.2. Two microwire samples with different heat treatment are investigated from which one single crystal and three polycrystalline TEM specimens, the latter with micro- and nano-size grains, have been produced. The measured Young’s modulus for all TEM specimens is around 70 GPa, considerably higher than the averaged 55 GPa of the original microwire sample. The height of the superelastic stress plateau shows an inverse relationship with the specimen thickness for the polycrystalline specimens. Martensite starts nucleating within the elastic region of the stress–strain curve and on the edges of the specimens while also grain boundaries act as nucleation sites in the polycrystalline specimens. When a martensite plate reaches a grain boundary in the polycrystalline specimen, it initiates the transformation in the neighboring grain at the other side of the grain boundary. In later stages martensite plates coalesce at higher loads in the stress plateau. In highly strained specimens, residual martensite remains after release. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000472940200002 | Publication Date | 2019-05-20 | |
Series Editor | Series Title ![]() |
Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 2199-384X | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | Times cited | Open Access | Not_Open_Access | ||
Notes | Saeid Pourbabak likes to thank the Flemish Science Foundation FWO for financial support under Project G.0366.15N. This work was also made possible through the AUHA13009 Grant “TopSPIN for TEM nanostatistics” of the Flemish HERCULES foundation. | Approved | Most recent IF: NA | ||
Call Number | EMAT @ emat @UA @ admin @ c:irua:159989 | Serial | 5177 | ||
Permanent link to this record | |||||
Author | Pourbabak, S.; Montero-Sistiaga, M.L.; Schryvers, D.; Van Humbeeck, J.; Vanmeensel, K. | ||||
Title | Microscopic investigation of as built and hot isostatic pressed Hastelloy X processed by Selective Laser Melting | Type | A1 Journal article | ||
Year | 2019 | Publication | Materials characterization | Abbreviated Journal | Mater Charact |
Volume | 153 | Issue | Pages | 366-371 | |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | Microstructural characteristics of Hastelloy X produced by Selective Laser Melting have been investigated by various microscopic techniques in the as built (AB) condition and after hot isostatic pressing (HIP). At sub-grain level the AB material consists of columnar high density dislocation cells while the HIP sample consists of columnar sub-grains with lower dislocation density that originate from the original dislocation cells, contradicting existing models. The sub-grains contain nanoscale precipitates enriched in Al, Ti, Cr and O, located at sub-grain boundaries in the AB condition and within the grains after HIP. At some grain boundaries, micrometer sized chromium carbides are detected after HIP. Micro hardness within the grains was found to decrease after HIP, which was attributed to the decrease in dislocation density due to recovery annealing. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000472696900040 | Publication Date | 2019-05-21 | |
Series Editor | Series Title ![]() |
Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1044-5803 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 2.714 | Times cited | 2 | Open Access | Not_Open_Access |
Notes | S.P. likes to thank the Flemish Science Foundation FWO for financial support under Project G.0366.15N. The authors acknowledge ENGIE Research and Technology Division for the use of the SLM280HL machine and financial support. This work was also made possible through the AUHA13009 grant “TopSPIN for TEM nanostatistics” of the Flemish HERCULES foundation. | Approved | Most recent IF: 2.714 | ||
Call Number | EMAT @ emat @UA @ admin @ c:irua:159974 | Serial | 5178 | ||
Permanent link to this record | |||||
Author | Charalampopoulou, E.; Cautaerts, N.; Van der Donck, T.; Schryvers, D.; Lambrinou, K.; Delville, R. | ||||
Title | Orientation relationship of the austenite-to-ferrite transformation in austenitic stainless steels due to dissolution corrosion in contact with liquid Pb-Bi eutectic | Type | A1 Journal article | ||
Year | 2019 | Publication | Scripta materialia | Abbreviated Journal | Scripta Mater |
Volume | 167 | Issue | 167 | Pages | 66-70 |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | The orientation relationship of an austenite-to-ferrite phase transformation in 316L stainless steels induced by the loss of austenite stabilizers resulting from the steel dissolution corrosion in liquid Pb-Bi eutectic was studied by means of electron backscatter diffraction. The misorientations at the austenite/ferrite interface were compared to the prevailing orientation relationship models in steels. The Pitsch orientation relationship model was found to be predominant, which is unusual for austenite-to-ferrite bulk transformations in steels. The nature of this particular transformation, which involves loss of steel alloying elements and the presence of an interfacial liquid metal layer, is discussed to explain this finding. (C) 2019 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000468720000014 | Publication Date | 2019-04-06 | |
Series Editor | Series Title ![]() |
Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1359-6462 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 3.747 | Times cited | 3 | Open Access | Not_Open_Access |
Notes | ; The authors would like to thank J. Joris (SCK center dot CEN) for technical support during corrosion testing, J. Lim (SCK center dot CEN) for the manufacture and calibration of the oxygen sensors used in this work and W. Van Renterghem (SCK center dot CEN) for his valuable help with the EBSD measurements. The steel suppliers were: Industeel, ArcelorMittal Group, for the 316L-SA plate, and Panchmahal Steel Ltd., India, for the 316L-CWrod. The authors gratefully acknowledge the financial support provided within the framework of the ongoing development of the MYRRHA irradiation facility. The research leading to these results falls within the framework of the European Energy Research Alliance Joint Programme on Nuclear Materials (EERA JPNM). ; | Approved | Most recent IF: 3.747 | ||
Call Number | UA @ admin @ c:irua:160228 | Serial | 5257 | ||
Permanent link to this record | |||||
Author | Samaee, V.; Sandfeld, S.; Idrissi, H.; Groten, J.; Pardoen, T.; Schwaiger, R.; Schryvers, D. | ||||
Title | Dislocation structures and the role of grain boundaries in cyclically deformed Ni micropillars | Type | A1 Journal article | ||
Year | 2020 | Publication | Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing | Abbreviated Journal | Mat Sci Eng A-Struct |
Volume | 769 | Issue | Pages | 138295 | |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | Transmission electron microscopy and finite element-based dislocation simulations were combined to study the development of dislocation microstructures after cyclic deformation of single crystal and bicrystal Ni micropillars oriented for multi-slip. A direct correlation between large accumulation of plastic strain and the presence of dislocation cell walls in the single crystal micropillars was observed, while the presence of the grain boundary hampered the formation of wall-like structures in agreement with a smaller accumulated plastic strain. Automated crystallographic orientation and nanostrain mapping using transmission electron microscopy revealed the presence of lattice heterogeneities associated to the cell walls including long range elastic strain fields. By combining the nanostrain mapping with an inverse modelling approach, information about dislocation density, line orientation and Burgers vector direction was derived, which is not accessible otherwise in such dense dislocation structures. Simulations showed that the image forces associated with the grain boundary in this specific bicrystal configuration have only a minor influence on dislocation behavior. Thus, the reduced occurrence of “mature” cell walls in the bicrystal can be attributed to the available volume, which is too small to accommodate cell structures. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000500373800018 | Publication Date | 2019-08-21 | |
Series Editor | Series Title ![]() |
Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0921-5093 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 6.4 | Times cited | 1 | Open Access | OpenAccess |
Notes | Financial support from the Flemish (FWO) and German Research Foundation (DFG) through the European M-ERA.NET project “FaSS” (Fatigue Simulation near Surfaces) under the grant numbers GA.014.13 N,SCHW855/5-1, and SA2292/2-1 is gratefully acknowledged. V.S. acknowledges the FWO research project G012012 N “Understanding nanocrystalline mechanical behaviour from structural investigations”. H.I. is mandated by the Belgian National Fund for Scientific Research (FSR-FNRS). S.S. acknowledges financial support from the European Research Council through the ERC Grant Agreement No. 759419 (MuDiLingo – A Multiscale Dislocation Language for Data- Driven Materials Science). | Approved | Most recent IF: 6.4; 2020 IF: 3.094 | ||
Call Number | EMAT @ emat @c:irua:163475 | Serial | 5371 | ||
Permanent link to this record | |||||
Author | Idrissi, H.; Ghidelli, M.; Béché, A.; Turner, S.; Gravier, S.; Blandin, J.-J.; Raskin, J.-P.; Schryvers, D.; Pardoen, T. | ||||
Title | Atomic-scale viscoplasticity mechanisms revealed in high ductility metallic glass films | Type | A1 Journal article | ||
Year | 2019 | Publication | Scientific reports | Abbreviated Journal | Sci Rep-Uk |
Volume | 9 | Issue | 1 | Pages | 13426 |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | The fundamental plasticity mechanisms in thin freestanding Zr65Ni35 metallic glass films are investigated in order to unravel the origin of an outstanding strength/ductility balance. The deformation process is homogenous until fracture with no evidence of catastrophic shear banding. The creep/relaxation behaviour of the films was characterized by on-chip tensile testing, revealing an activation volume in the range 100–200 Å3. Advanced high-resolution transmission electron microscopy imaging and spectroscopy exhibit a very fine glassy nanostructure with well-defined dense Ni-rich clusters embedded in Zr-rich clusters of lower atomic density and a ~2–3 nm characteristic length scale. Nanobeam electron diffraction analysis reveals that the accumulation of plastic deformation at roomtemperature correlates with monotonously increasing disruption of the local atomic order. These results provide experimental evidences of the dynamics of shear transformation zones activation in metallic glasses. The impact of the nanoscale structural heterogeneities on the mechanical properties including the rate dependent behaviour is discussed, shedding new light on the governing plasticity mechanisms in metallic glasses with initially heterogeneous atomic arrangement. |
||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000486139700008 | Publication Date | 2019-09-17 | |
Series Editor | Series Title ![]() |
Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 2045-2322 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 4.259 | Times cited | Open Access | ||
Notes | H. Idrissi is mandated by the Belgian National Fund for Scientific Research (FSR-FNRS). This work was supported by the FNRS under Grant PDR – T.0178.19. FWO project G093417N (‘Compressed sensing enabling low dose imaging in transmission electron microscopy’) and Hercules fund ‘Direct electron detector for soft matter TEM’ from Flemish Government are acknowledged. | Approved | Most recent IF: 4.259 | ||
Call Number | EMAT @ emat @c:irua:162786 | Serial | 5375 | ||
Permanent link to this record | |||||
Author | Yang, M.; Chen, H.; Orekhov, A.; Lu, Q.; Lan, X.; Li, K.; Zhang, S.; Song, M.; Kong, Y.; Schryvers, D.; Du, Y. | ||||
Title | Quantified contribution of β″ and β′ precipitates to the strengthening of an aged Al–Mg–Si alloy | Type | A1 Journal article | ||
Year | 2020 | Publication | Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing | Abbreviated Journal | Mat Sci Eng A-Struct |
Volume | 774 | Issue | Pages | 138776 | |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | It is generally believed that β00 precipitates, rather than β0 precipitates, are the major strengthening precipitates in aged Al–Mg–Si alloys. The reason for this difference is not well understood. To clarify this, two samples of the same Al–Mg–Si alloy but with different aging states were prepared. The under-aged sample only contains nanoprecipitates of the β00 type, while the peak-aged one contains nearly equal volumes of β00 and β0 precipitates. We have, for the first time, separated the strengthening effect of the contribution from βʺ and βʹ precipitates, respectively, by an indirect approach based on high-precision measurements of volume fractions, number densities, sizes, proportions of the precipitates, their lattice strains, the composition and grain size of the matrix. The β0 precipitates, which take 45.6% of the total precipitate volume in the peak-aged sample, contribute to the entire precipitation strengthening by only 31.6%. The main reason why they are less useful compared to β00 precipitates has been found to be associated with their smaller lattice strains relative to the matrix, which is 0.99% versus 2.10% (for β00 ). |
||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000514747200001 | Publication Date | 2019-12-04 | |
Series Editor | Series Title ![]() |
Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0921-5093 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 6.4 | Times cited | Open Access | OpenAccess | |
Notes | National Natural Science Foundation of China, 51531009 51711530713 51501230 ; Central South University, 2018gczd033 ; Flemish Science Foundation, VS.026.18N ; Program for Guangdong Introducing Innovative and Entrepreneurial Teams, 2016ZT06G025 ; Guangdong Natural Science Foundation, 2017B030306014 ; | Approved | Most recent IF: 6.4; 2020 IF: 3.094 | ||
Call Number | EMAT @ emat @c:irua:165290 | Serial | 5440 | ||
Permanent link to this record | |||||
Author | Boyat, X.; Ballat-Durand, D.; Marteau, J.; Bouvier, S.; Favergeon, J.; Orekhov, A.; Schryvers, D. | ||||
Title | Interfacial characteristics and cohesion mechanisms of linear friction welded dissimilar titanium alloys: Ti–5Al–2Sn–2Zr–4Mo–4Cr (Ti17) and Ti–6Al–2Sn–4Zr–2Mo (Ti6242) | Type | A1 Journal article | ||
Year | 2019 | Publication | Materials characterization | Abbreviated Journal | Mater Charact |
Volume | 158 | Issue | Pages | 109942 | |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | A detailed microstructural examination endeavoring to understand the interfacial phenomena yielding to cohesion in solid-state assembling processes was performed. This study focuses on the transition zone of a dissimilar titanium alloy joint obtained by Linear Friction Welding (LFW) the β-metastable Ti17 to the near-α Ti6242. The transition zone delimitating both alloys is characterized by a sharp microstructure change from acicular HCP (Hexagonal Close-Packed) α′ martensitic laths in the Ti6242 to equiaxed BCC β (Body-Centered Cubic) subgrains in the Ti17; these α′ plates were shown to precipitate within prior-β subgrains remarkably more rotated than the ones formed in the Ti17. Both α′ and β microstructures were found to be intermingled within transitional subgrains demarcating a limited gradient from one chemical composition to the other. These peculiar interfacial grains revealed that the cohesive mechanisms between the rubbing surfaces occurred in the single-phase β domain under severe strain and high-temperature conditions. During the hot deformation process, the mutual migration of the crystalline interfaces from one material to another assisted by a continuous dynamic recrystallization process was identified as the main adhesive mechanism at the junction zone. The latter led to successful cohesion between the rubbing surfaces. Once the reciprocating motion stopped, fast cooling caused both materials to experience either a βlean→α′ or βlean→βmetastable transformation in the interfacial zone depending on their local chemical composition. The limited process time and the subsequent hindered chemical homogenization at the transition zone led to retaining the so-called intermingled α’/βm subgrains constituting the border between both Ti-alloys. |
||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000503314000018 | Publication Date | 2019-10-16 | |
Series Editor | Series Title ![]() |
Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1044-5803 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 2.714 | Times cited | Open Access | ||
Notes | The authors gratefully acknowledge the financial support of the French National Research Agency (ANR) through the OPTIMUM ANR- 14-CE27-0017 project. The authors would also like to thank the Hautsde- France Region and the European Regional Development Fund (ERDF) 2014/2020 for the co-funding of this work. The authors would also like to thank ACB for providing LFW samples as well as Airbus for their technical support. | Approved | Most recent IF: 2.714 | ||
Call Number | EMAT @ emat @c:irua:165084 | Serial | 5441 | ||
Permanent link to this record | |||||
Author | Sandfeld, S.; Samaee, V.; Idrissi, H.; Groten, J.; Pardoen, T.; Schwaiger, R.; Schryvers, D. | ||||
Title | Datasets for the analysis of dislocations at grain boundaries and during vein formation in cyclically deformed Ni micropillars | Type | A1 Journal article | ||
Year | 2019 | Publication | Data in Brief | Abbreviated Journal | |
Volume | 27 | Issue | 27 | Pages | 104724 |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | The dataset together with the corresponding Python scripts and Jupyter notebooks presented in this article are supplementary data for the work presented in Samaee et al., 2019 [1]. The data itself consists of two parts: the simulation data that was used in [1] to analyze the effect of a particular grain boundary on curved dislocations and the precession electron diffraction (PED) strain maps together with post-processed data for analyzing details of the observed dislocation vein structures. Additionally, the complete stress tensor components, which are not shown in [1], have also been included. The data sets are accompanied by Python code explaining the file formats and showing how to post-process the data. (c) 2019 The Author(s). Published by Elsevier Inc. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/). | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000501988200181 | Publication Date | 2019-11-03 | |
Series Editor | Series Title ![]() |
Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 2352-3409 | ISBN | Additional Links | UA library record; WoS full record | |
Impact Factor | Times cited | Open Access | |||
Notes | Approved | Most recent IF: NA | |||
Call Number | UA @ admin @ c:irua:165092 | Serial | 6292 | ||
Permanent link to this record | |||||
Author | Pittarello, L.; Mckibbin, S.; Yamaguchi, A.; Ji, G.; Schryvers, D.; Debaille, V.; Claeys, P. | ||||
Title | Two generations of exsolution lamellae in pyroxene from Asuka 09545 : Clues to the thermal evolution of silicates in mesosiderite | Type | A1 Journal article | ||
Year | 2019 | Publication | The American mineralogist | Abbreviated Journal | Am Mineral |
Volume | 104 | Issue | 11 | Pages | 1663-1672 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | Mesosiderite meteorites consist of a mixture of crustal basaltic or gabbroic material and metal. Their formation process is still debated due to their unexpected combination of crust and core materials, possibly derived from the same planetesimal parent body, and lacking an intervening mantle component. Mesosiderites have experienced an extremely slow cooling rate from ca. 550 degrees C, as recorded in the metal (0.25-0.5 degrees C/Ma). Here we present a detailed investigation of exsolution features in pyroxene from the Antarctic mesosiderite Asuka (A) 09545. Geothermobarometry calculations, lattice parameters, lamellae orientation, and the presence of clinoenstatite as the host were used in an attempt to constrain the evolution of pyroxene from 1150 to 570 degrees C and the formation of two generations of exsolution lamellae. After pigeonite crystallization at ca. 1150 degrees C, the first exsolution process generated the thick augite lamellae along (100) in the temperature interval 1000-900 degrees C. By further cooling, a second order of exsolution lamellae formed within augite along (001), consisting of monoclinic low-Ca pyroxene, equilibrated in the temperature range 900-800 degrees C. The last process, occurring in the 600-500 degrees C temperature range, was likely the inversion of high to low pigeonite in the host crystal, lacking evidence for nucleation of orthopyroxene. The formation of two generations of exsolution lamellae, as well as of likely metastable pigeonite, suggest non-equilibrium conditions. Cooling was sufficiently slow to allow the formation of the lamellae, their preservation, and the transition from high to low pigeonite. In addition, the preservation of such fine-grained lamellae limits long-lasting, impact reheating to a peak temperature lower than 570 degrees C. These features, including the presence of monoclinic low-Ca pyroxene as the host, are reported in only a few mesosiderites. This suggests a possibly different origin and thermal history from most mesosiderites and that the crystallography (i.e., space group) of low-Ca pyroxene could be used as parameter to distinguish mesosiderite populations based on their cooling history. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000494707400014 | Publication Date | 2019-08-22 | |
Series Editor | Series Title ![]() |
Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0003-004x | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 2.021 | Times cited | Open Access | ||
Notes | Approved | Most recent IF: 2.021 | |||
Call Number | UA @ admin @ c:irua:164645 | Serial | 6331 | ||
Permanent link to this record | |||||
Author | Idrissi, H.; Samaee, V.; Lumbeeck, G.; Werf, T.; Pardoen, T.; Schryvers, D.; Cordier, P. | ||||
Title | In Situ Quantitative Tensile Testing of Antigorite in a Transmission Electron Microscope | Type | A1 Journal article | ||
Year | 2020 | Publication | Journal Of Geophysical Research-Solid Earth | Abbreviated Journal | J Geophys Res-Sol Ea |
Volume | 125 | Issue | 3 | Pages | |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | The determination of the mechanical properties of serpentinites is essential toward the understanding of the mechanics of faulting and subduction. Here we present the first in situ tensile tests on antigorite in a transmission electron microscope. A push‐to‐pull deformation device is used to perform quantitative tensile tests, during which force and displacement are measured, while the evolving microstructure is imaged with the microscope. The experiments have been performed at room temperature on 2 × 1 × 0.2 μm3 beams prepared by focused ion beam. The specimens are not single crystals despite their small sizes. Orientation mapping indicated that several grains were well oriented for plastic slip. However, no dislocation activity has been observed even though the engineering tensile stress went up to 700 MPa. We show also that antigorite does not exhibit a purely elastic‐brittle behavior since, despite the presence of defects, the specimens accumulate permanent deformation and did not fail within the elastic regime. Instead, we observe that strain localizes at grain boundaries. All observations concur to show that under these experimental conditions, grain boundary sliding is the dominant deformation mechanism. This study sheds a new light on the mechanical properties of antigorite and calls for further studies on the structure and properties of grain boundaries in antigorite and more generally in phyllosilicates. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000530895800023 | Publication Date | 2020-02-20 | |
Series Editor | Series Title ![]() |
Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 2169-9313 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 3.9 | Times cited | Open Access | OpenAccess | |
Notes | We thank S. Guillot for having kindly provided us with the two antigorite samples investigated in this study. We acknowledge funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program under Grant Agreement 787198—TimeMan. H. Idrissi is mandated by the Belgian National Fund for Scientific Research (FSR‐FNRS). We acknowledge fruitful discussions with A. Baronnet. We thank J. Gasc and an anonymous reviewer for their critical comments. Data (movies of the three in situ deformation experiments) can be downloaded (from https://doi.org/10.5281/zenodo.3583135). | Approved | Most recent IF: 3.9; 2020 IF: 3.35 | ||
Call Number | EMAT @ emat @c:irua:167594 | Serial | 6355 | ||
Permanent link to this record | |||||
Author | Lumbeeck, G.; Delvaux, A.; Idrissi, H.; Proost, J.; Schryvers, D. | ||||
Title | Analysis of internal stress build-up during deposition of nanocrystalline Ni thin films using transmission electron microscopy | Type | A1 Journal article | ||
Year | 2020 | Publication | Thin solid films : an international journal on the science and technology of thin and thick films | Abbreviated Journal | Thin Solid Films |
Volume | 707 | Issue | Pages | 138076 | |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | Ni thin films sputter-deposited at room temperature with varying Ar pressures were investigated with automated crystal orientation mapping in a transmission electron microscope to uncover the mechanisms controlling the internal stress build-up recorded in-situ during deposition. Large grains were found to induce behaviour similar to a stress-free nucleation layer. The measurements of grain size in most of the Ni thin films are in agreement with the island coalescence model. Low internal stress was observed at low Ar pressure and was explained by the presence of large grains. Relaxation of high internal stress was also noticed at the highest Ar pressure, which was attributed to a decrease of Σ3 twin boundary density due to a low deposition rate. The results provide insightful information to better understand the relationship between structural boundaries and the evolution of internal stress upon deposition of thin films. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000539312200011 | Publication Date | 2020-05-12 | |
Series Editor | Series Title ![]() |
Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | ||
Impact Factor | Times cited | Open Access | OpenAccess | ||
Notes | This work was supported by the Hercules Foundation [Grant No. AUHA13009], the Flemish Research Fund (FWO) [Grant No. G.0365.15N], and the Flemish Strategic Initiative for Materials (SIM) under the project InterPoCo. Thin film deposition has been realised as part of the WallonHY project, funded by the Public Service of Wallonia – Department of Energy and Sustainable Building. H. Idrissi is mandated by the Belgian National Fund for Scientific Research (FSR-FNRS). | Approved | Most recent IF: NA | ||
Call Number | EMAT @ emat @c:irua:169708 | Serial | 6370 | ||
Permanent link to this record | |||||
Author | Cautaerts, N.; Lamm, S.; Stergar, E.; Pakarinen, J.; Yang, Y.; Hofer, C.; Schnitzer, R.; Felfer, P.; Verwerft, M.; Delville, R.; Schryvers, D. | ||||
Title | Atom probe tomography data collection from DIN 1.4970 (15-15Ti) austenitic stainless steel irradiated with Fe ions | Type | Dataset | ||
Year | 2020 | Publication | Abbreviated Journal | ||
Volume | Issue | Pages | |||
Keywords | Dataset; Electron microscopy for materials research (EMAT) | ||||
Abstract | This dataset comprises a large collection of atom probe tomography datasets collected from DIN 1.4970 alloy that was irradiated with Fe ions at different conditions. The DIN 1.4970 alloy is an austenitic stainless steel with 15 wt% Cr, 15 wt% Ni, a small addition of Ti. The full composition and characterization of our material can be found published elsewhere [1,2]. Some of our material was subjected to ageing heat treatments at different temperatures for different times. Small samples of our original material and aged material was irradiated at the Michigan Ion Beam Laboratory in 2017 with 4.5 MeV Fe ions up to 40 dpa at an average dose rate of 2×10−4 dpa/s. This was done at three different temperatures: 300, 450, and 600 ºC. Atom probe samples were made of the irradiated layers (approximately 1.5 micron deep) with focused ion beam and mounted on Microtip coupons. APT measurements took place on three CAMECA LEAP-HR systems located at CAES in Idaho Falls, USA (files beginning with R33), at Montanuniversität Leoben in Leoben, Austria (R21) and at Friedrich–Alexander University in Erlangen, Germany (R56). | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | Publication Date | |||
Series Editor | Series Title ![]() |
Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | ISBN | Additional Links | UA library record | ||
Impact Factor | Times cited | Open Access | Not_Open_Access | ||
Notes | ; ; | Approved | Most recent IF: NA | ||
Call Number | UA @ admin @ c:irua:169127 | Serial | 6454 | ||
Permanent link to this record | |||||
Author | Penders, A.; Konstantinovic, M.J.; Bosch, R.W.; Schryvers, D. | ||||
Title | Crack initiation in tapered high Si stainless steel specimens : stress threshold analyses | Type | A1 Journal article | ||
Year | 2020 | Publication | Corrosion Engineering Science And Technology | Abbreviated Journal | Corros Eng Sci Techn |
Volume | Issue | Pages | 1-8 | ||
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | Tapered specimens were used for an accelerated test technique to study the crack initiation of high Si stainless steel by means of constant elongation rate tensile testing in a simulated pressurised water reactor environment. Detailed crack density distributions were obtained by applying an advanced crack detection algorithm on iteratively displaced scanning electron microscopy pictures featuring stress corrosion cracks along the specimen's gauge length. By means of finite-element analysis, prominent peaks in the crack density graphs are demonstrated to be related to stress relief and stress build-up during the crack initiation phase. Intrinsic scatter related to the crack detection suggests that stress corrosion cracking is independent of the strain-rate for strain-rates lower than 10(-6 )s(-1). Based on the extrapolation to constant load conditions, the critical threshold value for the duplex high Si stainless steel is estimated to be around 580 MPa. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000549651600001 | Publication Date | 2020-06-30 | |
Series Editor | Series Title ![]() |
Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1478-422x | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 1.8 | Times cited | 1 | Open Access | Not_Open_Access |
Notes | ; We would like to acknowledge ENGIE Electrabel for the financial support of this work under the contract number BSUEZ5500. ; | Approved | Most recent IF: 1.8; 2020 IF: 0.879 | ||
Call Number | UA @ admin @ c:irua:171292 | Serial | 6478 | ||
Permanent link to this record |