| Home | << 1 2 3 >> |
|
| Records | |||||
|---|---|---|---|---|---|
| Author | Li, D.Y.; Zeng, Y.J.; Pereira, L.M.C.; Batuk, D.; Hadermann, J.; Zhang, Y.Z.; Ye, Z.Z.; Temst, K.; Vantomme, A.; Van Bael, M.J.; Van Haesendonck, C.; | ||||
| Title | Anisotropic magnetism and spin-dependent transport in Co nanoparticle embedded ZnO thin films | Type | A1 Journal article | ||
| Year | 2013 | Publication | Journal of applied physics | Abbreviated Journal | J Appl Phys |
| Volume | 114 | Issue | 3 | Pages | 033909-6 |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | Oriented Co nanoparticles were obtained by Co ion implantation in crystalline ZnO thin films grown by pulsed laser deposition. Transmission electron microscopy revealed the presence of elliptically shaped Co precipitates with nanometer size, which are embedded in the ZnO thin films, resulting in anisotropic magnetic behavior. The low-temperature resistance of the Co-implanted ZnO thin films follows the Efros-Shklovskii type variable-range-hopping. Large negative magnetoresistance (MR) exceeding 10% is observed in a magnetic field of 1 T at 2.5K and the negative MR survives up to 250K (0.3%). The negative MR reveals hysteresis as well as anisotropy that correlate well with the magnetic properties, clearly demonstrating the presence of spin-dependent transport. (C) 2013 AIP Publishing LLC. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
Publisher  |
American Institute of Physics | Place of Publication | New York, N.Y. | Editor | |
| Language | Wos | 000322202700071 | Publication Date | 2013-07-17 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0021-8979; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 2.068 | Times cited | 10 | Open Access | |
| Notes | Approved | Most recent IF: 2.068; 2013 IF: 2.185 | |||
| Call Number | UA @ lucian @ c:irua:110765 | Serial | 126 | ||
| Permanent link to this record | |||||
| Author | Zhao, S.-X.; Zhang, Y.-R.; Gao, F.; Wang, Y.-N.; Bogaerts, A. | ||||
| Title | Bulk plasma fragmentation in a C4F8 inductively coupled plasma : a hybrid modelling study | Type | A1 Journal article | ||
| Year | 2015 | Publication | Journal of applied physics | Abbreviated Journal | J Appl Phys |
| Volume | 117 | Issue | 117 | Pages | 243303 |
| Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract | A hybrid model is used to investigate the fragmentation of C4F8 inductive discharges. Indeed, the resulting reactive species are crucial for the optimization of the Si-based etching process, since they determine the mechanisms of fluorination, polymerization, and sputtering. In this paper, we present the dissociation degree, the density ratio of F vs. CxFy (i.e., fluorocarbon (fc) neutrals), the neutral vs. positive ion density ratio, details on the neutral and ion components, and fractions of various fc neutrals (or ions) in the total fc neutral (or ion) density in a C4F8 inductively coupled plasma source, as well as the effect of pressure and power on these results. To analyze the fragmentation behavior, the electron density and temperature and electron energy probability function (EEPF) are investigated. Moreover, the main electron-impact generation sources for all considered neutrals and ions are determined from the complicated C4F8 reaction set used in the model. The C4F8 plasma fragmentation is explained, taking into account many factors, such as the EEPF characteristics, the dominance of primary and secondary processes, and the thresholds of dissociation and ionization. The simulation results are compared with experiments from literature, and reasonable agreement is obtained. Some discrepancies are observed, which can probably be attributed to the simplified polymer surface kinetics assumed in the model. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher |
American Institute of Physics | Place of Publication | New York, N.Y. | Editor | |
| Language | Wos | 000357613900009 | Publication Date | 2015-06-30 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0021-8979;1089-7550; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 2.068 | Times cited | 11 | Open Access | |
| Notes | Approved | Most recent IF: 2.068; 2015 IF: 2.183 | |||
| Call Number | c:irua:126477 | Serial | 261 | ||
| Permanent link to this record | |||||
| Author | Zhang, Y.; Jiang, W.; Zhang, Q.Z.; Bogaerts, A. | ||||
| Title | Computational study of plasma sustainability in radio frequency micro-discharges | Type | A1 Journal article | ||
| Year | 2014 | Publication | Journal of applied physics | Abbreviated Journal | J Appl Phys |
| Volume | 115 | Issue | 19 | Pages | 193301-193311 |
| Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract | We apply an implicit particle-in-cell Monte-Carlo (PIC-MC) method to study a radio-frequency argon microdischarge at steady state in the glow discharge limit, in which the microdischarge is sustained by secondary electron emission from the electrodes. The plasma density, electron energy distribution function (EEDF), and electron temperature are calculated in a wide range of operating conditions, including driving voltage, microdischarge gap, and pressure. Also, the effect of gap size scaling (in the range of 50-1000 μm) on the plasma sustaining voltage and peak electron density at atmospheric pressure is examined, which has not been explored before. In our simulations, three different EEDFs, i.e., a so-called three temperature hybrid mode, a two temperature α mode, and a two temperature γ mode distribution, are identified at different gaps and voltages. The maximum sustaining voltage to avoid a transition from the glow mode to an arc is predicted, as well as the minimum sustaining voltage for a steady glow discharge. Our calculations elucidate that secondary electrons play an essential role in sustaining the discharge, and as a result the relationship between breakdown voltage and gap spacing is far away from the Paschen law at atmospheric pressure. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher |
American Institute of Physics | Place of Publication | New York, N.Y. | Editor | |
| Language | Wos | 000336920200010 | Publication Date | 2014-05-16 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0021-8979;1089-7550; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 2.068 | Times cited | 11 | Open Access | |
| Notes | Approved | Most recent IF: 2.068; 2014 IF: 2.183 | |||
| Call Number | UA @ lucian @ c:irua:116948 | Serial | 458 | ||
| Permanent link to this record | |||||
| Author | Zhang, Y.; Fischetti, M.V.; Sorée, B.; Magnus, W.; Heyns, M.; Meuris, M. | ||||
| Title | Physical modeling of strain-dependent hole mobility in Ge p-channel inversion layers | Type | A1 Journal article | ||
| Year | 2009 | Publication | Journal of applied physics | Abbreviated Journal | J Appl Phys |
| Volume | 106 | Issue | 8 | Pages | 083704,1-083704,9 |
| Keywords | A1 Journal article; Condensed Matter Theory (CMT) | ||||
| Abstract | We present comprehensive calculations of the low-field hole mobility in Ge p-channel inversion layers with SiO2 insulator using a six-band k·p band-structure model. The cases of relaxed, biaxially, and uniaxially (both tensily and compressively) strained Ge are studied employing an efficient self-consistent methodmaking use of a nonuniform spatial mesh and of the Broyden second methodto solve the coupled envelope-wave function k·p and Poisson equations. The hole mobility is computed using the KuboGreenwood formalism accounting for nonpolar hole-phonon scattering and scattering with interfacial roughness. Different approximations to handle dielectric screening are also investigated. As our main result, we find a large enhancement (up to a factor of 10 with respect to Si) of the mobility in the case of uniaxial compressive stress similarly to the well-known case of Si. Comparison with experimental data shows overall qualitative agreement but with significant deviations due mainly to the unknown morphology of the rough Ge-insulator interface, to additional scattering with surface optical phonon from the high- insulator, to Coulomb scattering interface traps or oxide chargesignored in our calculationsand to different channel structures employed. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher |
American Institute of Physics | Place of Publication | New York, N.Y. | Editor | |
| Language | Wos | 000271358100050 | Publication Date | 2009-10-20 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0021-8979; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 2.068 | Times cited | 29 | Open Access | |
| Notes | Approved | Most recent IF: 2.068; 2009 IF: 2.072 | |||
| Call Number | UA @ lucian @ c:irua:80137 | Serial | 2617 | ||
| Permanent link to this record | |||||
| Author | Quintanilla, M.; Zhang, Y.; Liz-Marzan, L.M. | ||||
| Title | Subtissue plasmonic heating monitored with CaF2:Nd3+,Y3+ nanothermometers in the second biological window | Type | A1 Journal article | ||
| Year | 2018 | Publication | Chemistry of materials | Abbreviated Journal | Chem Mater |
| Volume | 30 | Issue | 8 | Pages | 2819-2828 |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | Measuring temperature in biological environments is an ambitious goal toward supporting medical treatment and diagnosis. Minimally invasive techniques based on optical probes require very specific properties that are difficult to combine within a single material. These include high chemical stability in aqueous environments, optical signal stability, low toxicity, high emission intensity, and, essential, working at wavelengths within the biological transparency windows so as to minimize invasiveness while maximizing penetration depth. We propose CaF2:Nd3+,Y3+ as a candidate for thermometry based on an intraband ratiometric approach, fully working within the biological windows (excitation at 808 nm; emission around 1050 nm). We optimized the thermal probes through the addition of Y3+ as a dopant to improve both emission intensity and thermal sensitivity. To define the conditions under which the proposed technique can be applied, gold nanorods were used to optically generate subtissue hot areas, while the resulting temperature variation was monitored with the new nanothermometers. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher |
American Chemical Society | Place of Publication | Washington, D.C | Editor | |
| Language | Wos | 000431088400038 | Publication Date | 2018-03-27 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0897-4756 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 9.466 | Times cited | 28 | Open Access | Not_Open_Access |
| Notes | ; The authors would like to thank Dr. Guillermo Gonzalez Rubio for the kind support with the synthesis of gold nanorods. M.Q and L.M.L.-M. acknowledge financial support from the European Commission under the Marie Sklodowska-Curie program (H2020-MSCA-IF-2014_659021 – PHELLINI). Y.Z. acknowledges financial support from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Grant Agreement No. 665501 through a FWO [PEGASUS]^2 Marie Sklodowska-Curie fellowship (12U4917N). ; | Approved | Most recent IF: 9.466 | ||
| Call Number | UA @ lucian @ c:irua:151576 | Serial | 5042 | ||
| Permanent link to this record | |||||
| Author | Wang, Z.; Zhang, Y.; Neyts, E.C.; Cao, X.; Zhang, X.; Jang, B.W.-L.; Liu, C.-jun | ||||
| Title | Catalyst preparation with plasmas : how does it work? | Type | A1 Journal article | ||
| Year | 2018 | Publication | ACS catalysis | Abbreviated Journal | Acs Catal |
| Volume | 8 | Issue | 3 | Pages | 2093-2110 |
| Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract | Catalyst preparation with plasmas is increasingly attracting interest. A plasma is a partially ionized gas, consisting of electrons, ions, molecules, radicals, photons, and excited species, which are all active species for catalyst preparation and treatment. Under the influence of plasma, nucleation and crystal growth in catalyst preparation can be very different from those in the conventional thermal approach. Some thermodynamically unfavorable reactions can easily take place with plasmas. Compounds such as sulfides, nitrides, and phosphides that are produced under harsh conditions can be synthesized by plasma under mild conditions. Plasmas can produce catalysts with smaller particle sizes and controllable structure. Plasma is also a facile tool for reduction, oxidation, doping, etching, coating, alloy formation, surface treatment, and surface cleaning in a simple and direct way. A rapid and convenient plasma template removal has thus been established for zeolite synthesis. It can operate at room temperature and allows the catalyst preparation on temperature-sensitive supporting materials. Plasma is typically effective for the production of various catalysts on metallic substrates. In addition, plasma-prepared transition-metal catalysts show enhanced low-temperature activity with improved stability. This provides a useful model catalyst for further improvement of industrial catalysts. In this review, we aim to summarize the recent advances in catalyst preparation with plasmas. The present understanding of plasma-based catalyst preparation is discussed. The challenges and future development are addressed. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher |
Amer chemical soc | Place of Publication | Washington | Editor | |
| Language | Wos | 000426804100055 | Publication Date | 2018-01-29 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 2155-5435 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 10.614 | Times cited | 81 | Open Access | Not_Open_Access |
| Notes | Approved | Most recent IF: 10.614 | |||
| Call Number | UA @ lucian @ c:irua:150880 | Serial | 4963 | ||
| Permanent link to this record | |||||
| Author | Liu, Y.-X.; Zhang, Y.-R.; Bogaerts, A.; Wang, Y.-N. | ||||
| Title | Electromagnetic effects in high-frequency large-area capacitive discharges : a review | Type | A1 Journal article | ||
| Year | 2015 | Publication | Journal of vacuum science and technology: A: vacuum surfaces and films | Abbreviated Journal | J Vac Sci Technol A |
| Volume | 33 | Issue | 33 | Pages | 020801 |
| Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract | In traditional capacitively coupled plasmas, the discharge can be described by an electrostatic model, in which the Poisson equation is employed to determine the electrostatic electric field. However, current plasma reactors are much larger and driven at a much higher frequency. If the excitation wavelength k in the plasma becomes comparable to the electrode radius, and the plasma skin depth d becomes comparable to the electrode spacing, the electromagnetic (EM) effects will become significant and compromise the plasma uniformity. In this regime, capacitive discharges have to be described by an EM model, i.e., the full set of Maxwells equations should be solved to address the EM effects. This paper gives an overview of the theory, simulation and experiments that have recently been carried out to understand these effects, which cause major uniformity problems in plasma processing for microelectronics and flat panel display industries. Furthermore, some methods for improving the plasma uniformity are also described and compared. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher |
A v s amer inst physics | Place of Publication | Melville | Editor | |
| Language | Wos | 000355739500007 | Publication Date | 2015-02-12 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0734-2101;1520-8559; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 1.374 | Times cited | 10 | Open Access | |
| Notes | Approved | Most recent IF: 1.374; 2015 IF: 2.322 | |||
| Call Number | c:irua:123541 | Serial | 903 | ||
| Permanent link to this record | |||||
| Author | Zhang, Y.-R.; Van Laer, K.; Neyts, E.C.; Bogaerts, A. | ||||
| Title | Can plasma be formed in catalyst pores? A modeling investigation | Type | A1 Journal article | ||
| Year | 2016 | Publication | Applied catalysis : B : environmental | Abbreviated Journal | Appl Catal B-Environ |
| Volume | 185 | Issue | 185 | Pages | 56-67 |
| Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract | tWe investigate microdischarge formation inside catalyst pores by a two-dimensional fluid model forvarious pore sizes in the m-range and for various applied voltages. Indeed, this is a poorly understoodphenomenon in plasma catalysis. The calculations are performed for a dielectric barrier discharge inhelium, at atmospheric pressure. The electron and ion densities, electron temperature, electric field andpotential, as well as the electron impact ionization and excitation rate and the densities of excited plasmaspecies, are examined for a better understanding of the characteristics of the plasma inside a pore. Theresults indicate that the pore size and the applied voltage are critical parameters for the formation of amicrodischarge inside a pore. At an applied voltage of 20 kV, our calculations reveal that the ionizationmainly takes place inside the pore, and the electron density shows a significant increase near and inthe pore for pore sizes larger than 200m, whereas the effect of the pore on the total ion density isevident even for 10m pores. When the pore size is fixed at 30m, the presence of the pore has nosignificant influence on the plasma properties at an applied voltage of 2 kV. Upon increasing the voltage,the ionization process is enhanced due to the strong electric field and high electron temperature, andthe ion density shows a remarkable increase near and in the pore for voltages above 10 kV. These resultsindicate that the plasma species can be formed inside pores of structured catalysts (in the m range),and they may interact with the catalyst surface, and affect the plasma catalytic process. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher |
Place of Publication | Editor | |||
| Language | Wos | 000369452000006 | Publication Date | 2015-12-11 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0926-3373 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 9.446 | Times cited | 75 | Open Access | |
| Notes | This work was supported by the Fund for Scientific ResearchFlanders (FWO) (Grant no. G.0217.14N), the National Natural Sci-ence Foundation of China (Grant no. 11405019), and the ChinaPostdoctoral Science Foundation (Grant no. 2015T80244). Theauthors are very grateful to V. Meynen for the useful discussions oncatalysts. This work was carried out in part using the Turing HPCinfrastructure at the CalcUA core facility of the Universiteit Antwer-pen, a division of the Flemish Supercomputer Center VSC, fundedby the Hercules Foundation, the Flemish Government (departmentEWI) and the University of Antwerp. | Approved | Most recent IF: 9.446 | ||
| Call Number | c:irua:129808 | Serial | 3984 | ||
| Permanent link to this record | |||||
| Author | Zhang, Y.-R.; Neyts, E.C.; Bogaerts, A. | ||||
| Title | Influence of the Material Dielectric Constant on Plasma Generation inside Catalyst Pores | Type | A1 Journal article | ||
| Year | 2016 | Publication | The journal of physical chemistry: C : nanomaterials and interfaces | Abbreviated Journal | J Phys Chem C |
| Volume | 120 | Issue | 120 | Pages | 25923-25934 |
| Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract | Plasma catalysis is gaining increasing interest for various environmental applications, but the crucial question is whether plasma can be created inside catalyst pores and under which conditions. In practice, various catalytic support materials are used, with various dielectric constants. We investigate here the influence of the dielectric constant on the plasma properties inside catalyst pores and in the sheath in front of the pores, for various pore sizes. The calculations are performed by a two-dimensional fluid model for an atmospheric pressure dielectric barrier discharge in helium. The electron impact ionization rate, electron temperature, electron and ion density, as well as the potential distribution and surface charge density, are analyzed for a better understanding of the discharge behavior inside catalyst pores. The results indicate that, in a 100 μm pore, the electron impact ionization in the pore, which is characteristic for the plasma generation inside the pore, is greatly enhanced for dielectric constants below 300. Smaller pore sizes only yield enhanced ionization for smaller dielectric constants, i.e., up to εr = 200, 150, and 50 for pore sizes of 50, 30, and 10 μm. Thus, the most common catalyst supports, i.e., Al2O3 and SiO2, which have dielectric constants around εr = 8−11 and 4.2, respectively, should allow more easily that microdischarges can be formed inside catalyst pores, even for smaller pore sizes. On the other hand, ferroelectric materials with dielectric constants above 300 never seem to yield plasma enhancement inside catalyst pores, not even for 100 μm pore sizes. Furthermore, it is clear that the dielectric constant of the material has a large effect on the extent of plasma enhancement inside the catalyst pores, especially in the range between εr = 4 and εr = 200. The obtained results are explained in detail based on the surface charge density at the pore walls, and the potential distribution and electron temperature inside and above the pores. The results obtained with this model are important for plasma catalysis, as the production plasma species in catalyst pores might affect the catalyst properties, and thus improve the applications of plasma catalysis. |
||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher |
Place of Publication | Editor | |||
| Language | Wos | 000388429100029 | Publication Date | 2016-11-17 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1932-7447 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 4.536 | Times cited | 34 | Open Access | |
| Notes | This work was supported by the Fund for Scientific Research Flanders (FWO) (Grant G.0217.14N), the National Natural Science Foundation of China (Grant 11405019), and the China Postdoctoral Science Foundation (Grant 2015T80244). This work was carried out in part using the Turing HPC infrastructure at the CalcUA core facility of the Universiteit Antwerpen, a division of the Flemish Supercomputer Center VSC, funded by the Hercules Foundation, the Flemish Government (department EWI), and the University of Antwerp. | Approved | Most recent IF: 4.536 | ||
| Call Number | PLASMANT @ plasmant @ c:irua:138602 | Serial | 4319 | ||
| Permanent link to this record | |||||
| Author | Zhang, Y.; Wang, H.-yu; Zhang, Y.-ru; Bogaerts, A. | ||||
| Title | Formation of microdischarges inside a mesoporous catalyst in dielectric barrier discharge plasmas | Type | A1 Journal article | ||
| Year | 2017 | Publication | Plasma sources science and technology | Abbreviated Journal | Plasma Sources Sci T |
| Volume | 26 | Issue | 26 | Pages | 054002 |
| Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract | The formation process of a microdischarge (MD) in both μm- and nm-sized catalyst pores is simulated by a two-dimensional particle-in-cell/Monte Carlo collision model. A parallel-plate dielectric barrier discharge configuration in filamentary mode is considered in ambient air. The discharge is powered by a high voltage pulse. Our calculations reveal that a streamer can penetrate into the surface features of a porous catalyst and MDs can be formed inside both μm- and nm-sized pores, yielding ionization inside the pore. For the μm-sized pores, the ionization mainly occurs inside the pore, while for the nm-sized pores the ionization is strongest near and inside the pore. Thus, enhanced discharges near and inside the mesoporous catalyst are observed. Indeed, the maximum values of the electric field, ionization rate and electron density occur near and inside the pore. The maximum electric field and electron density inside the pore first increase when the pore size rises from 4 nm to 10 nm, and then they decrease for the 100 nm pore, due to a more pronounced surface discharge for the smaller pores. However, the ionization rate is highest for the 100 nm pore due to the largest effective ionization region. |
||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher |
Place of Publication | Editor | |||
| Language | Wos | 000399277700001 | Publication Date | 2017-04-05 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1361-6595 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 3.302 | Times cited | 15 | Open Access | OpenAccess |
| Notes | This work was supported by the NSFC (11405067, 11275007, 11375163). Y Zhang gratefully acknowledges the Belgian Federal Science Policy Office for financial support. The authors are very grateful to Wei Jiang for the useful discussions on the photo-ionization model and the particle-incell/ Monte-Carlo model. | Approved | Most recent IF: 3.302 | ||
| Call Number | PLASMANT @ plasmant @ c:irua:142806 | Serial | 4566 | ||
| Permanent link to this record | |||||
| Author | Sentosun, K.; Lobato, I.; Bladt, E.; Zhang, Y.; Palenstijn, W.J.; Batenburg, K.J.; Van Dyck, D.; Bals, S. | ||||
| Title | Artifact Reduction Based on Sinogram Interpolation for the 3D Reconstruction of Nanoparticles Using Electron Tomography | Type | A1 Journal article | ||
| Year | 2017 | Publication | Particle and particle systems characterization | Abbreviated Journal | Part. Part. Syst. Charact. |
| Volume | 34 | Issue | 34 | Pages | 1700287 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT); Vision lab | ||||
| Abstract | Electron tomography is a well-known technique providing a 3D characterization of the morphology and chemical composition of nanoparticles. However, several reasons hamper the acquisition of tilt series with a large number of projection images, which deteriorate the quality of the 3D reconstruction. Here, an inpainting method that is based on sinogram interpolation is proposed, which enables one to reduce artifacts in the reconstruction related to a limited tilt series of projection images. The advantages of the approach will be demonstrated for the 3D characterization of nanoparticles using phantoms and several case studies. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher |
Place of Publication | Editor | |||
| Language | Wos | 000418416100005 | Publication Date | 2017-10-27 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1521-4117 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | Times cited | 2 | Open Access | OpenAccess | |
| Notes | K.S. and S.B. acknowledge support from the Fund for Scientific ResearchFlanders (FWO) (G019014N and G021814N). S.B. acknowledges financial support from European Research Council (ERC Starting Grant #335078-COLOURATOM). Y.Z. acknowledges financial support from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Grant Agreement No. 665501 through a FWO [PEGASUS]2 Marie Skłodowska-Curie fellowship (12U4917N). The authors would like to thank Prof. Luis Liz-Marzán for provision of the samples. (ROMEO:yellow; preprint:; postprint:restricted ; pdfversion:cannot); saraecas; ECAS_Sara; | Approved | Most recent IF: NA | ||
| Call Number | EMAT @ emat @c:irua:147857UA @ admin @ c:irua:147857 | Serial | 4798 | ||
| Permanent link to this record | |||||
| Author | Gao, M.; Zhang, Y.; Wang, H.; Guo, B.; Zhang, Q.; Bogaerts, A. | ||||
| Title | Mode Transition of Filaments in Packed-Bed Dielectric Barrier Discharges | Type | A1 Journal article | ||
| Year | 2018 | Publication | Catalysts | Abbreviated Journal | Catalysts |
| Volume | 8 | Issue | 6 | Pages | 248 |
| Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract | We investigated the mode transition from volume to surface discharge in a packed bed dielectric barrier discharge reactor by a two-dimensional particle-in-cell/Monte Carlo collision method. The calculations are performed at atmospheric pressure for various driving voltages and for gas mixtures with different N2 and O2 compositions. Our results reveal that both a change of the driving voltage and gas mixture can induce mode transition. Upon increasing voltage, a mode transition from hybrid (volume+surface) discharge to pure surface discharge occurs, because the charged species can escape much more easily to the beads and charge the bead surface due to the strong electric field at high driving voltage. This significant surface charging will further enhance the tangential component of the electric field along the dielectric bead surface, yielding surface ionization waves (SIWs). The SIWs will give rise to a high concentration of reactive species on the surface, and thus possibly enhance the surface activity of the beads, which might be of interest for plasma catalysis. Indeed, electron impact excitation and ionization mainly take place near the bead surface. In addition, the propagation speed of SIWs becomes faster with increasing N2 content in the gas mixture, and slower with increasing O2 content, due to the loss of electrons by attachment to O2 molecules. Indeed, the negative O-2 ion density produced by electron impact attachment is much higher than the electron and positive O+2 ion density. The different ionization rates between N2 and O2 gases will create different amounts of electrons and ions on the dielectric bead surface, which might also have effects in plasma catalysis. |
||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher |
Place of Publication | Editor | |||
| Language | Wos | 000436128600027 | Publication Date | 2018-06-15 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 2073-4344 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 3.082 | Times cited | 7 | Open Access | OpenAccess |
| Notes | The authors are very grateful to Wei Jiang for the useful discussions on the particle-incell/ Monte-Carlo collision model. | Approved | Most recent IF: 3.082 | ||
| Call Number | PLASMANT @ plasmant @c:irua:152171 | Serial | 4991 | ||
| Permanent link to this record | |||||
| Author | Zhang, Y.-R.; Neyts, E.C.; Bogaerts, A. | ||||
| Title | Enhancement of plasma generation in catalyst pores with different shapes | Type | A1 Journal article | ||
| Year | 2018 | Publication | Plasma sources science and technology | Abbreviated Journal | Plasma Sources Sci T |
| Volume | 27 | Issue | 5 | Pages | 055008 |
| Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract | Plasma generation inside catalyst pores is of utmost importance for plasma catalysis, as the existence of plasma species inside the pores affects the active surface area of the catalyst available to the plasma species for catalytic reactions. In this paper, the electric field enhancement, and thus the plasma production inside catalyst pores with different pore shapes is studied with a two-dimensional fluid model. The results indicate that the electric field will be significantly enhanced near tip-like structures. In a conical pore with small opening, the strongest electric field appears at the opening and bottom corners of the pore, giving rise to a prominent ionization rate throughout the pore. For a cylindrical pore, the electric field is only enhanced at the bottom corners of the pore, with lower absolute value, and thus the ionization rate inside the pore is only slightly enhanced. Finally, in a conical pore with large opening, the electric field is characterized by a maximum at the bottom of the pore, yielding a similar behavior for the ionization rate. These results demonstrate that the shape of the pore has a significantly influence on the electric field enhancement, and thus modifies the plasma properties. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher |
Place of Publication | Editor | |||
| Language | Wos | 000432351700002 | Publication Date | 2018-05-15 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1361-6595 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 3.302 | Times cited | 11 | Open Access | OpenAccess |
| Notes | This work was supported by the Fund for Scientific Research Flanders (FWO) (Grant No. G.0217.14N) and the Fundamental Research Funds for the Central Universities (Grant No. DUT17LK52). | Approved | Most recent IF: 3.302 | ||
| Call Number | PLASMANT @ plasmant @c:irua:151546 | Serial | 4998 | ||
| Permanent link to this record | |||||
| Author | Zhang, Y.; Bals, S.; Van Tendeloo, G. | ||||
| Title | Understanding CeO2-Based Nanostructures through Advanced Electron Microscopy in 2D and 3D | Type | A1 Journal article | ||
| Year | 2019 | Publication | Particle and particle systems characterization | Abbreviated Journal | Part Part Syst Char |
| Volume | 36 | Issue | 36 | Pages | 1800287 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | Engineering morphology and size of CeO2-based nanostructures on a (sub)nanometer scale will greatly influence their performance; this is because of their high oxygen storage capacity and unique redox properties, which allow faster switching of the oxidation state between Ce4+ and Ce3+. Although tremendous research has been carried out on the shapecontrolled synthesis of CeO2, the characterization of these nanostructures at the atomic scale remains a major challenge and the origin of debate. The rapid developments of aberration-corrected transmission electron microscopy (AC-TEM) have pushed the resolution below 1 Å, both in TEM and in scanning transmission electron microscopy (STEM) mode. At present, not only morphology and structure, but also composition and electronic structure can be analyzed at an atomic scale, even in 3D. This review summarizes recent significant achievements using TEM/ STEM and associated spectroscopic techniques to study CeO2-based nanostructures and related catalytic phenomena. Recent results have shed light on the understanding of the different mechanisms. The potential and limitations, including future needs of various techniques, are discussed with recommendations to facilitate further developments of new and highly efficient CeO2-based nanostructures. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher |
Place of Publication | Editor | |||
| Language | Wos | 000455414600012 | Publication Date | 2018-10-24 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0934-0866 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 4.474 | Times cited | 22 | Open Access | OpenAccess |
| Notes | Y.Z. acknowledges financial support from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska- Curie grant agreement no. 665501 through a FWO [PEGASUS]2 Marie Skłodowska-Curie fellowship (12U4917N). S.B. acknowledges funding from the European Research Council, ERC grant no. 335078-Colouratom. ; ecas_sara | Approved | Most recent IF: 4.474 | ||
| Call Number | EMAT @ emat @UA @ admin @ c:irua:156391 | Serial | 5151 | ||
| Permanent link to this record | |||||
| Author | Altantzis, T.; Lobato, I.; De Backer, A.; Béché, A.; Zhang, Y.; Basak, S.; Porcu, M.; Xu, Q.; Sánchez-Iglesias, A.; Liz-Marzán, L.M.; Van Tendeloo, G.; Van Aert, S.; Bals, S. | ||||
| Title | Three-Dimensional Quantification of the Facet Evolution of Pt Nanoparticles in a Variable Gaseous Environment | Type | A1 Journal article | ||
| Year | 2019 | Publication | Nano letters | Abbreviated Journal | Nano Lett |
| Volume | 19 | Issue | 19 | Pages | 477-481 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | Pt nanoparticles play an essential role in a wide variety of catalytic reactions. The activity of the particles strongly depends on their three-dimensional (3D) structure and exposed facets, as well as on the reactive environment. High-resolution electron microscopy has often been used to characterize nanoparticle catalysts but unfortunately most observations so far have been either performed in vacuum and/or using conventional (2D) in situ microscopy. The latter however does not provide direct 3D morphological information. We have implemented a quantitative methodology to measure variations of the 3D atomic structure of nanoparticles under the flow of a selected gas. We were thereby able to quantify refaceting of Pt nanoparticles with atomic resolution during various oxidation−reduction cycles. In a H2 environment, a more faceted surface morphology of the particles was observed with {100} and {111} planes being dominant. On the other hand, in O2 the percentage of {100} and {111} facets decreased and a significant increase of higher order facets was found, resulting in a more rounded morphology. This methodology opens up new opportunities toward in situ characterization of catalytic nanoparticles because for the first time it enables one to directly measure 3D morphology variations at the atomic scale in a specific gaseous reaction environment. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher |
Place of Publication | Editor | |||
| Language | Wos | 000455561300061 | Publication Date | 2019-01-09 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1530-6984 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 12.712 | Times cited | 82 | Open Access | OpenAccess |
| Notes | This work was supported by the European Research Council (Grant 335078 COLOURATOM to S.B. and Grant 770887 PICOMETRICS to S.V.A.). The authors acknowledge funding from the European Commission Grant (EUSMI 731019 to S.B., L.M.L.-M., and Q.X. and MUMMERING 765604 to S.B. and Q.X.). The authors gratefully acknowledge funding from the Research Foundation Flanders (FWO, Belgium) through project fundings (G.0368.15N, G.0369.15N, and G.0267.18N), postdoctoral grants to T.A. and A.D.B, and an FWO [PEGASUS]2 Marie Sklodowska-Curie fellowship to Y.Z. (12U4917N). L.M.L.-M. acknowledges funding from the Spanish Ministerio de Economía y Competitividad (Grant MAT2017-86659-R). We gratefully acknowledge the support of NVIDIA Corporation with the donation of the Titan X Pascal GPU used for this research. ecas_sara Realnano 815128; sygma | Approved | Most recent IF: 12.712 | ||
| Call Number | EMAT @ emat @UA @ admin @ c:irua:156390 | Serial | 5150 | ||
| Permanent link to this record | |||||
| Author | van der Burgt, J.S.; Geuchies, J.J.; van der Meer, B.; Vanrompay, H.; Zanaga, D.; Zhang, Y.; Albrecht, W.; Petukhov, A.V.; Filion, L.; Bals, S.; Swart, I.; Vanmaekelbergh, D. | ||||
| Title | Cuboidal supraparticles self-assembled from cubic CsPbBr3 perovskite nanocrystals | Type | A1 Journal article | ||
| Year | 2018 | Publication | The journal of physical chemistry: C : nanomaterials and interfaces | Abbreviated Journal | J Phys Chem C |
| Volume | 122 | Issue | 122 | Pages | 15706-15712 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | Colloidal CsPbBr3 nanocrystals (NCs) have emerged as promising candidates for various opto-electronic applications, such as light-emitting diodes, photodetectors, and solar cells. Here, we report on the self-assembly of cubic NCs from an organic suspension into ordered cuboidal supraparticles (SPs) and their structural and optical properties. Upon increasing the NC concentration or by addition of a nonsolvent, the formation of the SPs occurs homogeneously in the suspension, as monitored by in situ X-ray scattering measurements. The three-dimensional structure of the SPs was resolved through high-angle annular dark-field scanning transmission electron microscopy and electron tomography. The NCs are atomically aligned but not connected. We characterize NC vacancies on superlattice positions both in the bulk and on the surface of the SPs. The occurrence of localized atomic-type NC vacancies-instead of delocalized ones-indicates that NC-NC attractions are important in the assembly, as we verify with Monte Carlo simulations. Even when assembled in SPs, the NCs show bright emission, with a red shift of about 30 meV compared to NCs in suspension. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher |
Place of Publication | Washington, D.C. | Editor | ||
| Language | Wos | 000439003600071 | Publication Date | 2018-06-14 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1932-7447; 1932-7455 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 4.536 | Times cited | 60 | Open Access | OpenAccess |
| Notes | ; The authors thank Dr. Rajeev Dattani and Jacques Gorini from the ID02 beamline of the ESRF for their excellent assistance during the X-ray scattering experiments. We also thank Carlo van Overbeek, P. Tim Prins, and Federico Montanarella for their support during the synchrotron experiments. The authors gratefully acknowledge Prof. Dr. Alfons van Blaaderen for fruitful discussions. D.V. acknowledges funding from NWO-CW TOPPUNT “Superficial superstructures.” J.J.G. acknowledges the joint Debye and ESRF graduate programs for the financial support. H.V. gratefully acknowledges the financial support by the Flemish Fund for Scientific Research (FWO grant 1S32617NN). S.B. acknowledges the financial support from the European Research Council (ERC Starting grant # 335078-COLOURATOMS). Y.Z. acknowledges the financial support from the European Union's Horizon 2020 research and innovation program, under the Marie Sklodowska-Curie grant agreement #665501 through a FWO [PEGASUS]2 Marie Sklodowska-Curie fellowship (12U4917N). W.A. acknowledges the financial support from the European Research Council under the European Unions Seventh Framework Program (FP-2007-2013)/ERC Advanced grant agreement 291667 HierarSACol. ; ecas_Sara | Approved | Most recent IF: 4.536 | ||
| Call Number | UA @ lucian @ c:irua:153161UA @ admin @ c:irua:153161 | Serial | 5087 | ||
| Permanent link to this record | |||||
| Author | Bogaerts, A.; Zhang, Q.-Z.; Zhang, Y.-R.; Van Laer, K.; Wang, W. | ||||
| Title | Burning questions of plasma catalysis: Answers by modeling | Type | A1 Journal article | ||
| Year | 2019 | Publication | Catalysis today | Abbreviated Journal | Catal Today |
| Volume | 337 | Issue | Pages | 3-14 | |
| Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract | Plasma catalysis is promising for various environmental, energy and chemical synthesis applications, but the underlying mechanisms are far from understood. Modeling can help to obtain a better insight in these mechanisms. Some burning questions relate to the plasma behavior inside packed bed reactors and whether plasma can penetrate into catalyst pores. In this paper, we try to provide answers to these questions, by means of both fluid modeling and particle-in-cell/Monte Carlo collision simulations. We present a short overview of recent findings obtained in our group by means of modeling, i.e., the enhanced electric field near the contact points and the streamer propagation through the packing in packed bed reactors, as well as the plasma behavior in catalyst pores, to determine the minimum pore size in which plasma streamers can penetrate. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher |
Place of Publication | Editor | |||
| Language | Wos | 000482179500002 | Publication Date | 2019-04-24 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0920-5861 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 4.636 | Times cited | 7 | Open Access | |
| Notes | University of Antwerp, the European Marie Skłodowska-Curie Individual Fellowships “GlidArc”; “CryoEtch” within Horizon2020, 657304 702604 ;We would like to thank H.-H. Kim for performing experiments to validate the modeling of streamer propagation in packed bed reactors. We acknowledge financial support from the TOP-BOF project of the University of Antwerp, the European Marie Skłodowska-Curie Individual Fellowships “GlidArc” and “CryoEtch” within Horizon2020 (Grant Nos. 657304 and 702604). | Approved | Most recent IF: 4.636 | ||
| Call Number | PLASMANT @ plasmant @c:irua:161775 | Serial | 5356 | ||
| Permanent link to this record | |||||
| Author | Wu, L.; Kolmeijer, K.E.; Zhang, Y.; An, H.; Arnouts, S.; Bals, S.; Altantzis, T.; Hofmann, J.P.; Costa Figueiredo, M.; Hensen, E.J.M.; Weckhuysen, B.M.; van der Stam, W. | ||||
| Title | Stabilization effects in binary colloidal Cu and Ag nanoparticle electrodes under electrochemical CO₂ reduction conditions | Type | A1 Journal article | ||
| Year | 2021 | Publication | Nanoscale | Abbreviated Journal | Nanoscale |
| Volume | 13 | Issue | 9 | Pages | 4835-4844 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT); Applied Electrochemistry & Catalysis (ELCAT) | ||||
| Abstract | Nanoparticle modified electrodes constitute an attractive way to tailor-make efficient carbon dioxide (CO2) reduction catalysts. However, the restructuring and sintering processes of nanoparticles under electrochemical reaction conditions not only impedes the widespread application of nanoparticle catalysts, but also misleads the interpretation of the selectivity of the nanocatalysts. Here, we colloidally synthesized metallic copper (Cu) and silver (Ag) nanoparticles with a narrow size distribution (<10%) and utilized them in electrochemical CO2 reduction reactions. Monometallic Cu and Ag nanoparticle electrodes showed severe nanoparticle sintering already at low overpotential of -0.8 V vs. RHE, as evidenced by ex situ SEM investigations, and potential-dependent variations in product selectivity that resemble bulk Cu (14% for ethylene at -1.3 V vs. RHE) and Ag (69% for carbon monoxide at -1.0 V vs. RHE). However, by co-deposition of Cu and Ag nanoparticles, a nanoparticle stabilization effect was observed between Cu and Ag, and the sintering process was greatly suppressed at CO2 reducing potentials (-0.8 V vs. RHE). Furthermore, by varying the Cu/Ag nanoparticle ratio, the CO2 reduction reaction (CO2RR) selectivity towards methane (maximum of 20.6% for dense Cu-2.5-Ag-1 electrodes) and C-2 products (maximum of 15.7% for dense Cu-1-Ag-1 electrodes) can be tuned, which is attributed to a synergistic effect between neighbouring Ag and Cu nanoparticles. We attribute the stabilization of the nanoparticles to the positive enthalpies of Cu-Ag solid solutions, which prevents the dissolution-redeposition induced particle growth under CO2RR conditions. The observed nanoparticle stabilization effect enables the design and fabrication of active CO2 reduction nanocatalysts with high durability. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher |
Place of Publication | Editor | |||
| Language | Wos | 000628024200011 | Publication Date | 2021-02-22 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 2040-3364 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 7.367 | Times cited | 24 | Open Access | OpenAccess |
| Notes | This work is funded by the Strategic UU-TU/e Alliance project ‘Joint Centre for Chemergy Research’ (budget holder B. M. W.). S. B. acknowledges support from the European Research Council (ERC Consolidator Grant #815128 REALNANO). S. A. and T. A. acknowledge funding from the University of Antwerp Research fund (BOF). We thank Eric Hellebrand (Faculty of Geosciences, Utrecht University) for the assistance in SEM measurements. Dr Ramon Oord (ARC Chemical Building Blocks Consortium, Faculty of Science, Utrecht University) is acknowledged for assisting with the grazing incidence XRD measurements; sygma | Approved | Most recent IF: 7.367 | ||
| Call Number | UA @ admin @ c:irua:176723 | Serial | 6737 | ||
| Permanent link to this record | |||||
| Author | Freund, R.; Canossa, S.; Cohen, S.M.; Yan, W.; Deng, H.; Guillerm, V.; Eddaoudi, M.; Madden, D.G.; Fairen-Jimenez, D.; Lyu, H.; Macreadie, L.K.; Ji, Z.; Zhang, Y.; Wang, B.; Haase, F.; Wöll, C.; Zaremba, O.; Andreo, J.; Wuttke, S.; Diercks, C.S. | ||||
| Title | 25 years of Reticular Chemistry | Type | A1 Journal article | ||
| Year | 2021 | Publication | Angewandte Chemie-International Edition | Abbreviated Journal | Angew Chem Int Edit |
| Volume | Issue | Pages | anie.202101644 | ||
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
| Abstract | At its core, reticular chemistry has translated the precision and expertise of organic and inorganic synthesis to the solid state. While initial excitement over metal‐organic frameworks (MOFs) and covalent organic frameworks (COFs) was undoubtedly fueled by their unprecedented porosity and surface areas, the most profound scientific innovation of the field has been the elaboration of design strategies for the synthesis of extended crystalline solids through strong directional bonds. In this contribution we highlight the different classes of reticular materials that have been developed, how these frameworks can be functionalized and how complexity can be introduced into their backbones. Finally, we show how the structural control over these materials is being extended from the molecular scale to their crystal morphology and shape on the nanoscale, all the way to their shaping on the bulk scale. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher |
Place of Publication | Editor | |||
| Language | Wos | 000672037800001 | Publication Date | 2021-03-29 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1433-7851 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 11.994 | Times cited | Open Access | OpenAccess | |
| Notes | Approved | Most recent IF: 11.994 | |||
| Call Number | EMAT @ emat @c:irua:177778 | Serial | 6743 | ||
| Permanent link to this record | |||||
| Author | Yi, Y.; Li, S.; Cui, Z.; Hao, Y.; Zhang, Y.; Wang, L.; Liu, P.; Tu, X.; Xu, X.; Guo, H.; Bogaerts, A. | ||||
| Title | Selective oxidation of CH4 to CH3OH through plasma catalysis: Insights from catalyst characterization and chemical kinetics modelling | Type | A1 Journal Article;Methane conversion | ||
| Year | 2021 | Publication | Applied Catalysis B-Environmental | Abbreviated Journal | Appl Catal B-Environ |
| Volume | 296 | Issue | Pages | 120384 | |
| Keywords | A1 Journal Article;Methane conversion; Plasma catalysis; Selective oxidation; Methanol synthesis; Plasma chemistry; Plasma, laser ablation and surface modeling Antwerp (PLASMANT) ; | ||||
| Abstract | The selective oxidation of methane to methanol (SOMTM) by molecular oxygen is a holy grail in catalytic chemistry and remains a challenge in chemical industry. We perform SOMTM in a CH4/O2 plasma, at low temperature and atmospheric pressure, promoted by Ni-based catalysts, reaching 81 % liquid oxygenates selectivity and 50 % CH3OH selectivity, with an excellent catalytic stability. Chemical kinetics modelling shows that CH3OH in the plasma is mainly produced through radical reactions, i.e., CH4 + O(1D) → CH3O + H, followed by CH3O + H + M→ CH3OH + M and CH3O + HCO → CH3OH + CO. The catalyst characterization shows that the improved production of CH3OH is attributed to abundant chemisorbed oxygen species, originating from highly dispersed NiO phase with strong oxide support interaction with γ-Al2O3, which are capable of promoting CH3OH formation through E-R reactions and activating H2O molecules to facilitate CH3OH desorption. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher |
Place of Publication | Editor | |||
| Language | Wos | 000706860000003 | Publication Date | 2021-05-21 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0926-3373 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 9.446 | Times cited | Open Access | OpenAccess | |
| Notes | National Natural Science Foundation of China; PetroChina Innovation Foundation; We acknowledge financial support from the PetroChina Innovation Foundation [grant ID: 2018D-5007-0501], the Young Star Project of Dalian Science and Technology Bureau [grant ID: 2019RQ042], the National Natural Science Foundation of China [grant ID: 21503032] and the TOP research project of the Research Fund of the University of Antwerp [grant ID: 32249]. | Approved | Most recent IF: 9.446 | ||
| Call Number | PLASMANT @ plasmant @c:irua:178816 | Serial | 6793 | ||
| Permanent link to this record | |||||
| Author | Hudry, D.; De Backer, A.; Popescu, R.; Busko, D.; Howard, I.A.; Bals, S.; Zhang, Y.; Pedrazo‐Tardajos, A.; Van Aert, S.; Gerthsen, D.; Altantzis, T.; Richards, B.S. | ||||
| Title | Interface Pattern Engineering in Core‐Shell Upconverting Nanocrystals: Shedding Light on Critical Parameters and Consequences for the Photoluminescence Properties | Type | A1 Journal article | ||
| Year | 2021 | Publication | Small | Abbreviated Journal | Small |
| Volume | Issue | Pages | 2104441 | ||
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT); Applied Electrochemistry & Catalysis (ELCAT) | ||||
| Abstract | Advances in controlling energy migration pathways in core-shell lanthanide (Ln)-based hetero-nanocrystals (HNCs) have relied heavily on assumptions about how optically active centers are distributed within individual HNCs. In this article, it is demonstrated that different types of interface patterns can be formed depending on shell growth conditions. Such interface patterns are not only identified but also characterized with spatial resolution ranging from the nanometer- to the atomic-scale. In the most favorable cases, atomic-scale resolved maps of individual particles are obtained. It is also demonstrated that, for the same type of core-shell architecture, the interface pattern can be engineered with thicknesses of just 1 nm up to several tens of nanometers. Total alloying between the core and shell domains is also possible when using ultra-small particles as seeds. Finally, with different types of interface patterns (same architecture and chemical composition of the core and shell domains) it is possible to modify the output color (yellow, red, and green-yellow) or change (improvement or degradation) the absolute upconversion quantum yield. The results presented in this article introduce an important paradigm shift and pave the way toward the emergence of a new generation of core-shell Ln-based HNCs with better control over their atomic-scale organization. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher |
Place of Publication | Editor | |||
| Language | Wos | 000710758000001 | Publication Date | 2021-10-25 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1613-6810 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 8.643 | Times cited | 17 | Open Access | OpenAccess |
| Notes | The authors would like to acknowledge the financial support provided by the Helmholtz Recruitment Initiative Fellowship (B.S.R.) and the Helmholtz Association's Research Field Energy (Materials and Technologies for the Energy Transition program, Topic 1 Photovoltaics and Wind Energy). The authors would like to thank the Karlsruhe Nano Micro Facility (KNMF) for STEM access. This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Programme (Grant agreement no. 770887 PICOMETRICS to S.V.A. and Grant agreement no. 815128 REALNANO to S.B.). The authors acknowledge financial support from the Research Foundation Flanders (FWO, Belgium) through Projects no. G.0502.18N, G.0267.18N, and a postdoctoral grant to A.D.B. T.A. acknowledges funding from the University of Antwerp Research fund (BOF). This project had received funding (EUSMI proposal #E181100205) from the European Union's Horizon 2020 Research and Innovation Programme under Grant agreement no 731019 (EUSMI). D.H. would like to thank “CGFigures” for helpful tutorials on 3D graphics with Blender.; sygmaSB | Approved | Most recent IF: 8.643 | ||
| Call Number | EMAT @ emat @c:irua:183285 | Serial | 6817 | ||
| Permanent link to this record | |||||
| Author | Mushtaq, A.; Pradhan, B.; Kushavah, D.; Zhang, Y.; Wolf, M.; Schrenker, N.; Fron, E.; Bals, S.; Hofkens, J.; Debroye, E.; Pal, S.K. | ||||
| Title | Third-Order Nonlinear Optical Properties and Saturation of Two-Photon Absorption in Lead-Free Double Perovskite Nanocrystals under Femtosecond Excitation | Type | A1 Journal article | ||
| Year | 2021 | Publication | Acs Photonics | Abbreviated Journal | Acs Photonics |
| Volume | 8 | Issue | 11 | Pages | 3365-3374 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | Lead halide perovskites have been widely explored in the field of photovoltaics, light-emitting diodes, and lasers due to their outstanding linear and nonlinear optical (NLO) properties. But, the presence of lead toxicity and low chemical stability remain serious concerns. Lead-free double perovskite with excellent optical properties and chemical stability could be an alternative. However, proper examination of the NLO properties of such a material is crucial to identify their utility for future nonlinear device applications. Herein, we have made use of femtosecond (fs) Z-scan technique to explore the NLO properties of Cs2AgIn0.9Bi0.1Cl6 nanocrystals (NCs). Our measurements suggest that under nonresonant fs excitation, perovskite NCs exhibit strong twophoton absorption (TPA). The observed saturation of TPA at high light intensities has been explained by a customized model. Furthermore, we have demonstrated a change in the nonlinear refractive index of the NCs under varying input intensities. The strong TPA absorption of lead-free double perovskite NCs could be used for Kerr nonlinearity-based nonlinear applications such as optical shutters for picosecond lasers. |
||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher |
Place of Publication | Editor | |||
| Language | Wos | 000757024100028 | Publication Date | 2021-11-17 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 2330-4022 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 6.756 | Times cited | 25 | Open Access | OpenAccess |
| Notes | A.M. is thankful to IIT Mandi for his fellowship and Advanced Materials Research Centre for the experimental facilities. A.M. is also thankful to Torbjörn Pascher (Pascher Instrument) for writing the Z-scan data acquisition program. J.H. acknowledges financial support from the Research Foundation-Flanders (FWO, Grant No. G983.19N, G0A5817N, and G0H6316N) and the Flemish government through long-term structural funding Methusalem (CASAS2, Meth/15/04). B.P. acknowledges postdoctoral fellowship from the Research Foundation- Flanders (FWO Grant No. 1275521N). D.K. acknowledges the financial support from Science and Engineering Research Board (Grant No. PDF/2018/003146), India. N.J.S. acknowledges financial support from the Research Foundation- Flanders via a postdoctoral fellowship (FWO Grant No. 1238622N). | Approved | Most recent IF: 6.756 | ||
| Call Number | EMAT @ emat @c:irua:184249 | Serial | 6832 | ||
| Permanent link to this record | |||||
| Author | Dey, A.; Ye, J.; De, A.; Debroye, E.; Ha, S.K.; Bladt, E.; Kshirsagar, A.S.; Wang, Z.; Yin, J.; Wang, Y.; Quan, L.N.; Yan, F.; Gao, M.; Li, X.; Shamsi, J.; Debnath, T.; Cao, M.; Scheel, M.A.; Kumar, S.; Steele, J.A.; Gerhard, M.; Chouhan, L.; Xu, K.; Wu, X.-gang; Li, Y.; Zhang, Y.; Dutta, A.; Han, C.; Vincon, I.; Rogach, A.L.; Nag, A.; Samanta, A.; Korgel, B.A.; Shih, C.-J.; Gamelin, D.R.; Son, D.H.; Zeng, H.; Zhong, H.; Sun, H.; Demir, H.V.; Scheblykin, I.G.; Mora-Sero, I.; Stolarczyk, J.K.; Zhang, J.Z.; Feldmann, J.; Hofkens, J.; Luther, J.M.; Perez-Prieto, J.; Li, L.; Manna, L.; Bodnarchuk, M., I; Kovalenko, M., V; Roeffaers, M.B.J.; Pradhan, N.; Mohammed, O.F.; Bakr, O.M.; Yang, P.; Muller-Buschbaum, P.; Kamat, P., V; Bao, Q.; Zhang, Q.; Krahne, R.; Galian, R.E.; Stranks, S.D.; Bals, S.; Biju, V.; Tisdale, W.A.; Yan, Y.; Hoye, R.L.Z.; Polavarapu, L. | ||||
| Title | State of the art and prospects for Halide Perovskite Nanocrystals | Type | A1 Journal article | ||
| Year | 2021 | Publication | Acs Nano | Abbreviated Journal | Acs Nano |
| Volume | 15 | Issue | 7 | Pages | 10775-10981 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
| Abstract | Metal-halide perovskites have rapidly emerged as one of the most promising materials of the 21st century, with many exciting properties and great potential for a broad range of applications, from photovoltaics to optoelectronics and photocatalysis. The ease with which metal-halide perovskites can be synthesized in the form of brightly luminescent colloidal nanocrystals, as well as their tunable and intriguing optical and electronic properties, has attracted researchers from different disciplines of science and technology. In the last few years, there has been a significant progress in the shape-controlled synthesis of perovskite nanocrystals and understanding of their properties and applications. In this comprehensive review, researchers having expertise in different fields (chemistry, physics, and device engineering) of metal-halide perovskite nanocrystals have joined together to provide a state of the art overview and future prospects of metal-halide perovskite nanocrystal research. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher |
Place of Publication | Editor | |||
| Language | Wos | 000679406500006 | Publication Date | 2021-06-17 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1936-0851 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 13.942 | Times cited | 538 | Open Access | OpenAccess |
| Notes | E.D. and J.H. acknowledge financial support from the Research FoundationFlanders (FWO Grant Nos. S002019N, G.0B39.15, G.0B49.15, G.0962.13, G098319N, and ZW15_09-GOH6316), the Research Foundation Flanders postdoctoral fellowships to J.A.S. and E.D. (FWO Grant Nos. 12Y7218N and 12O3719N, respectively), | Approved | Most recent IF: 13.942 | ||
| Call Number | UA @ admin @ c:irua:180553 | Serial | 6846 | ||
| Permanent link to this record | |||||
| Author | Zhang, Y.; Qin, S.; Claes, N.; Schilling, W.; Sahoo, P.K.; Ching, H.Y.V.; Jaworski, A.; Lemière, F.; Slabon, A.; Van Doorslaer, S.; Bals, S.; Das, S. | ||||
| Title | Direct Solar Energy-Mediated Synthesis of Tertiary Benzylic Alcohols Using a Metal-Free Heterogeneous Photocatalyst | Type | A1 Journal article | ||
| Year | 2022 | Publication | ACS Sustainable Chemistry and Engineering | Abbreviated Journal | Acs Sustain Chem Eng |
| Volume | 10 | Issue | 1 | Pages | 530-540 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT); Organic synthesis (ORSY) | ||||
| Abstract | Direct hydroxylation via the functionalization of tertiary benzylic C(sp3)-H bond is of great significance for obtaining tertiary alcohols which find wide applications in pharmaceuticals as well as in fine chemical industries. However, current synthetic procedures use toxic reagents and therefore, the development of a sustainable strategy for the synthesis of tertiary benzyl alcohols is highly desirable. To solve this problem, herein, we report a metal-free heterogeneous photocatalyst to synthesize the hydroxylated products using oxygen as the key reagent. Various benzylic substrates were employed into our mild reaction conditions to afford the desirable products in good to excellent yields. More importantly, gram-scale reaction was achieved via harvesting direct solar energy and exhibited high quantity of the product. The high stability of the catalyst was proved via recycling the catalyst and spectroscopic analyses. Finally, a possible mechanism was proposed based on the EPR and other experimental evidence. |
||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher |
Place of Publication | Editor | |||
| Language | Wos | 000736518000001 | Publication Date | 2022-01-10 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 2168-0485 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 8.4 | Times cited | 24 | Open Access | OpenAccess |
| Notes | We thank BOF joint PhD grant (to Y. Z.), Francqui Foundation and FWO research grant (to S.D.), Chinese Scholarship Council (to Y.Z.). A.S. would like to thank the Swedish Energy Agency for financial support (project nr: 5050-1). The SEM microscope was partly funded by the Hercules Fund from the Flemish Government. | Approved | Most recent IF: 8.4 | ||
| Call Number | EMAT @ emat @c:irua:184744 | Serial | 6900 | ||
| Permanent link to this record | |||||
| Author | Wang, K.; Ceulemans, S.; Zhang, H.; Tsonev, I.; Zhang, Y.; Long, Y.; Fang, M.; Li, X.; Yan, J.; Bogaerts, A. | ||||
| Title | Inhibiting recombination to improve the performance of plasma-based CO2 conversion | Type | A1 Journal Article | ||
| Year | 2024 | Publication | Chemical Engineering Journal | Abbreviated Journal | Chemical Engineering Journal |
| Volume | 481 | Issue | Pages | 148684 | |
| Keywords | A1 Journal Article; Plasma-based CO2 splitting Recombination reactions In-situ gas sampling Fluid dynamics modeling Kinetics modeling Afterglow quenching; Plasma, laser ablation and surface modeling Antwerp (PLASMANT) ; | ||||
| Abstract | Warm plasma offers a promising route for CO2 splitting into valuable CO, yet recombination reactions of CO with oxygen, forming again CO2, have recently emerged as critical limitation. This study combines experiments and fluid dynamics + chemical kinetics modelling to comprehensively analyse the recombination reactions upon CO2 splitting in an atmospheric plasmatron. We introduce an innovative in-situ gas sampling technique, enabling 2D spatial mapping of gas product compositions and temperatures, experimentally confirming for the first time the substantial limiting effect of CO recombination reactions in the afterglow region. Our results show that the CO mole fraction at a 5 L/min flow rate drops significantly from 11.9 % at a vertical distance of z = 20 mm in the afterglow region to 8.6 % at z = 40 mm. We constructed a comprehensive 2D model that allows for spatial reaction rates analysis incorporating crucial reactions, and we validated it to kinetically elucidate this phenomenon. CO2 +M⇌O+CO+M and CO2 +O⇌CO+O2 are the dominant reactions, with the forward reactions prevailing in the plasma region and the backward reactions becoming prominent in the afterglow region. These results allow us to propose an afterglow quenching strategy for performance enhancement, which is further demonstrated through a meticulously developed plasmatron reactor with two-stage cooling. Our approach substantially increases the CO2 conversion (e.g., from 6.6 % to 19.5 % at 3 L/min flow rate) and energy efficiency (from 13.5 % to 28.5 %, again at 3 L/min) and significantly shortens the startup time (from ~ 150 s to 25 s). Our study underscores the critical role of inhibiting recombination reactions in plasma-based CO2 conversion and offers new avenues for performance enhancement. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher |
Place of Publication | Editor | |||
| Language | Wos | 001168999200001 | Publication Date | 2024-01-10 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1385-8947 | ISBN | Additional Links | UA library record; WoS full record | |
| Impact Factor | 15.1 | Times cited | Open Access | Not_Open_Access | |
| Notes | Key Research and Development Program of Zhejiang Province, 2023C03129 ; Vlaamse regering; European Research Council; National Natural Science Foundation of China, 51976191 52276214 ; Horizon 2020 Framework Programme; Fonds De La Recherche Scientifique – FNRS; Fonds Wetenschappelijk Onderzoek, 1101524N ; Vlaams Supercomputer Centrum; Horizon 2020, 101081162 810182 ; European Research Council; | Approved | Most recent IF: 15.1; 2024 IF: 6.216 | ||
| Call Number | PLASMANT @ plasmant @c:irua:204352 | Serial | 8993 | ||
| Permanent link to this record | |||||
| Author | Ghasemitarei, M.; Ghorbi, T.; Yusupov, M.; Zhang, Y.; Zhao, T.; Shali, P.; Bogaerts, A. | ||||
| Title | Effects of Nitro-Oxidative Stress on Biomolecules: Part 1—Non-Reactive Molecular Dynamics Simulations | Type | A1 Journal Article | ||
| Year | 2023 | Publication | Biomolecules | Abbreviated Journal | Biomolecules |
| Volume | 13 | Issue | 9 | Pages | 1371 |
| Keywords | A1 Journal Article; plasma medicine; reactive oxygen and; Plasma, laser ablation and surface modeling Antwerp (PLASMANT) ; | ||||
| Abstract | Plasma medicine, or the biomedical application of cold atmospheric plasma (CAP), is an expanding field within plasma research. CAP has demonstrated remarkable versatility in diverse biological applications, including cancer treatment, wound healing, microorganism inactivation, and skin disease therapy. However, the precise mechanisms underlying the effects of CAP remain incompletely understood. The therapeutic effects of CAP are largely attributed to the generation of reactive oxygen and nitrogen species (RONS), which play a crucial role in the biological responses induced by CAP. Specifically, RONS produced during CAP treatment have the ability to chemically modify cell membranes and membrane proteins, causing nitro-oxidative stress, thereby leading to changes in membrane permeability and disruption of cellular processes. To gain atomic-level insights into these interactions, non-reactive molecular dynamics (MD) simulations have emerged as a valuable tool. These simulations facilitate the examination of larger-scale system dynamics, including protein-protein and protein-membrane interactions. In this comprehensive review, we focus on the applications of non-reactive MD simulations in studying the effects of CAP on cellular components and interactions at the atomic level, providing a detailed overview of the potential of CAP in medicine. We also review the results of other MD studies that are not related to plasma medicine but explore the effects of nitro-oxidative stress on cellular components and are therefore important for a broader understanding of the underlying processes. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher |
Place of Publication | Editor | |||
| Language | Wos | 001071356400001 | Publication Date | 2023-09-11 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 2218-273X | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | Times cited | Open Access | Not_Open_Access | ||
| Notes | This research received no external funding. | Approved | Most recent IF: NA | ||
| Call Number | PLASMANT @ plasmant @c:irua:200380 | Serial | 8958 | ||
| Permanent link to this record | |||||
| Author | Bhatia, H.; Keshavarz, M.; Martin, C.; Van Gaal, L.; Zhang, Y.; de Coen, B.; Schrenker, N.J.; Valli, D.; Ottesen, M.; Bremholm, M.; Van de Vondel, J.; Bals, S.; Hofkens, J.; Debroye, E. | ||||
| Title | Achieving High Moisture Tolerance in Pseudohalide Perovskite Nanocrystals for Light-Emitting Diode Application | Type | A1 Journal Article | ||
| Year | 2023 | Publication | ACS Applied Optical Materials | Abbreviated Journal | ACS Appl. Opt. Mater. |
| Volume | 1 | Issue | 6 | Pages | 1184-1191 |
| Keywords | A1 Journal Article; Electron Microscopy for Materials Science (EMAT) ; | ||||
| Abstract | The addition of potassium thiocyanate (KSCN) to the FAPbBr3 structure and subsequent post-treatment of nanocrystals (NCs) lead to high quantum confinement, resulting in a photoluminescent quantum yield (PLQY) approaching unity and microsecond decay times. This synergistic approach demonstrated exceptional stability under humid conditions, retaining 70% of the PLQY for over a month, while the untreated NCs degrade within 24 h. Additionally, the devices incorporating the post-treated NCs displayed 1.5% external quantum efficiency (EQE), a 5-fold improvement over untreated devices. These results provide promising opportunities for the use of perovskites in moisture-stable optoelectronics. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher |
Place of Publication | Editor | |||
| Language | Wos | Publication Date | 2023-06-23 | ||
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 2771-9855 | ISBN | Additional Links | UA library record | |
| Impact Factor | Times cited | Open Access | OpenAccess | ||
| Notes | Hercules Foundation, HER/11/14 ; European Commission; Ministerio de Ciencia e Innovaci?n, PID2021-128761OA-C22 ; European Regional Development Fund; Vlaamse regering, CASAS2 Meth/15/04 ; Fonds Wetenschappelijk Onderzoek, 1238622N 1514220N 1S45223N G.0B39.15 G.0B49.15 G098319N S002019N ZW15_09-GOH6316 ; Onderzoeksraad, KU Leuven, C14/19/079 db/21/006/bm iBOF-21-085 STG/21/010 ; Junta de Comunidades de Castilla-La Mancha, SBPLY/21/180501/000127 ; H2020 European Research Council, 642196 815128 ; | Approved | Most recent IF: NA | ||
| Call Number | EMAT @ emat @c:irua:201011 | Serial | 8975 | ||
| Permanent link to this record | |||||
| Author | Zhang, Y.-R.; Xu, X.; Zhao, S.-X.; Bogaerts, A.; Wang, Y.-N. | ||||
| Title | Comparison of electrostatic and electromagnetic simulations for very high frequency plasmas | Type | A1 Journal article | ||
| Year | 2010 | Publication | Physics of plasmas | Abbreviated Journal | Phys Plasmas |
| Volume | 17 | Issue | 11 | Pages | 113512-113512,11 |
| Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract | A two-dimensional self-consistent fluid model combined with the full set of Maxwell equations is developed to investigate an argon capacitively coupled plasma, focusing on the electromagnetic effects on the discharge characteristics at various discharge conditions. The results indicate that there exist distinct differences in plasma characteristics calculated with the so-called electrostatic model (i.e., without taking into account the electromagnetic effects) and the electromagnetic model (which includes the electromagnetic effects), especially at very high frequencies. Indeed, when the excitation source is in the high frequency regime and the electromagnetic effects are taken into account, the plasma density increases significantly and meanwhile the ionization rate evolves to a very different distribution when the electromagnetic effects are dominant. Furthermore, the dependence of the plasma characteristics on the voltage and pressure is also investigated, at constant frequency. It is observed that when the voltage is low, the difference between these two models becomes more obvious than at higher voltages. As the pressure increases, the plasma density profiles obtained from the electromagnetic model smoothly shift from edge-peaked over uniform to a broad maximum in the center. In addition, the edge effect becomes less pronounced with increasing frequency and pressure, and the skin effect rather than the standing-wave effect becomes dominant when the voltage is high. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher |
Place of Publication | Woodbury, N.Y. | Editor | ||
| Language | Wos | 000285486500105 | Publication Date | 2010-11-22 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1070-664X; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 2.115 | Times cited | 30 | Open Access | |
| Notes | Approved | Most recent IF: 2.115; 2010 IF: 2.320 | |||
| Call Number | UA @ lucian @ c:irua:84763 | Serial | 429 | ||
| Permanent link to this record | |||||
| Author | Zhang, Y.-R.; Gao, F.; Li, X.-C.; Bogaerts, A.; Wang, Y.-N. | ||||
| Title | Fluid simulation of the bias effect in inductive/capacitive discharges | Type | A1 Journal article | ||
| Year | 2015 | Publication | Journal of vacuum science and technology: A: vacuum surfaces and films | Abbreviated Journal | J Vac Sci Technol A |
| Volume | 33 | Issue | 33 | Pages | 061303 |
| Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract | Computer simulations are performed for an argon inductively coupled plasma (ICP) with a capacitive radio-frequency bias power, to investigate the bias effect on the discharge mode transition and on the plasma characteristics at various ICP currents, bias voltages, and bias frequencies. When the bias frequency is fixed at 13.56 MHz and the ICP current is low, e.g., 6A, the spatiotemporal averaged plasma density increases monotonically with bias voltage, and the bias effect is already prominent at a bias voltage of 90 V. The maximum of the ionization rate moves toward the bottom electrode, which indicates clearly the discharge mode transition in inductive/capacitive discharges. At higher ICP currents, i.e., 11 and 13 A, the plasma density decreases first and then increases with bias voltage, due to the competing mechanisms between the ion acceleration power dissipation and the capacitive power deposition. At 11 A, the bias effect is still important, but it is noticeable only at higher bias voltages. At 13 A, the ionization rate is characterized by a maximum at the reactor center near the dielectric window at all selected bias voltages, which indicates that the ICP power, instead of the bias power, plays a dominant role under this condition, and no mode transition is observed. Indeed, the ratio of the bias power to the total power is lower than 0.4 over a wide range of bias voltages, i.e., 0300V. Besides the effect of ICP current, also the effect of various bias frequencies is investigated. It is found that the modulation of the bias power to the spatiotemporal distributions of the ionization rate at 2MHz is strikingly different from the behavior observed at higher bias frequencies. Furthermore, the minimum of the plasma density appears at different bias voltages, i.e., 120V at 2MHz and 90V at 27.12 MHz. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher |
Place of Publication | Editor | |||
| Language | Wos | 000365503800020 | Publication Date | 2015-08-07 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0734-2101;1520-8559; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 1.374 | Times cited | 9 | Open Access | |
| Notes | Approved | Most recent IF: 1.374; 2015 IF: 2.322 | |||
| Call Number | c:irua:126824 | Serial | 1229 | ||
| Permanent link to this record | |||||
| Author | Zhang, Y.-R.; Xu, X.; Bogaerts, A.; Wang, Y.-N. | ||||
| Title | Fluid simulation of the phase-shift effect in hydrogen capacitively coupled plasmas: 1 : transient behaviour of electrodynamics and power deposition | Type | A1 Journal article | ||
| Year | 2012 | Publication | Journal of physics: D: applied physics | Abbreviated Journal | J Phys D Appl Phys |
| Volume | 45 | Issue | 1 | Pages | 015202-015202,11 |
| Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract | A two-dimensional self-consistent fluid model coupled with the full set of Maxwell equations is established to investigate the phase-shift effect on the transient behaviour of electrodynamics and power deposition in a hydrogen capacitively coupled plasma. The effect has been examined at 13.56 MHz and 100 MHz, respectively, because of the different phase-shift modulation when the electromagnetic effects are dominant. The results indicate that the spatiotemporal distributions of the plasma characteristics obtained for various phase-shift cases are obviously different both in shape and especially in absolute values. Indeed, when the phase difference varies from 0 to π, there is an increase in the electron flux, thus the power deposition becomes more pronounced. At the frequency of 13.56 MHz, the axial electron flux in the bulk plasma becomes uniform along the z-axis, and the radial electron flux exhibits two peaks within one period at the reverse-phase case, whereas the oscillation is less pronounced at the in-phase case. Furthermore, in the very high frequency discharge, the radial electron flux is alternately positive and negative with four peaks during one period, and the ionization mainly occurs in the sheath region, due to the prominent power deposition there at a phase difference equal to π. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher |
Place of Publication | London | Editor | ||
| Language | Wos | 000298290000011 | Publication Date | 2011-12-12 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0022-3727;1361-6463; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 2.588 | Times cited | 57 | Open Access | |
| Notes | Approved | Most recent IF: 2.588; 2012 IF: 2.528 | |||
| Call Number | UA @ lucian @ c:irua:92851 | Serial | 1230 | ||
| Permanent link to this record | |||||