NANOlab Center of Excellence literature database -- Query Results

	NANOlab Center of Excellence literature database Home \| Show All \| Simple Search \| Advanced Search	Login Quick Search: Field: contains: ...
	181–210 of 336 records found matching your query (RSS \| history):

Select All Deselect All

<< 1 2 3 4 5 6 7 8 9 10 11 12 >>

List View

Citations

Details

	Records
	Author	van Renterghem, W.; Schryvers, D.; van Landuyt, J.; van Roost, C.; de Keyzer, R.
	Title	The influence of crystal thickness on the image tone			Type	A1 Journal article
	Year	2003	Publication	Journal of imaging science	Abbreviated Journal	J Imaging Sci Techn
	Volume	47	Issue	2	Pages	133-138
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	It is known that the neutral image tone of a developed photographic film becomes brownish when the thickness of the original silver halide tabular crystals is reduced. We investigate by electron microscopy to what extent the silver filament structure has changed and how it induces the shift in image tone. Therefore, two samples of AgBr {111} tabular crystals with average thicknesses of 160 nm and 90 nm respectively, are compared. It is shown that the dimensions and defect structure of the filaments are comparable, but that the 90 nm crystals result in a more widely spaced structure, which explains the shift in image tone on a qualitative level. The influence of the addition of an image toner, i.e., phenylmercaptotetrazole, on the filament structure is also investigated. An even more open filament structure of longer, but smaller filaments was observed.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Springfield, Va	Editor
	Language		Wos		Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	8750-9237; 1062-3701	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	0.348	Times cited		Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:48384			Serial	1619
Permanent link to this record



	Author	Idrissi, H.; Samaee, V.; Lumbeeck, G.; Werf, T.; Pardoen, T.; Schryvers, D.; Cordier, P.
	Title	In Situ Quantitative Tensile Testing of Antigorite in a Transmission Electron Microscope			Type	A1 Journal article
	Year	2020	Publication	Journal Of Geophysical Research-Solid Earth	Abbreviated Journal	J Geophys Res-Sol Ea
	Volume	125	Issue	3	Pages
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The determination of the mechanical properties of serpentinites is essential toward the understanding of the mechanics of faulting and subduction. Here we present the first in situ tensile tests on antigorite in a transmission electron microscope. A push‐to‐pull deformation device is used to perform quantitative tensile tests, during which force and displacement are measured, while the evolving microstructure is imaged with the microscope. The experiments have been performed at room temperature on 2 × 1 × 0.2 μm3 beams prepared by focused ion beam. The specimens are not single crystals despite their small sizes. Orientation mapping indicated that several grains were well oriented for plastic slip. However, no dislocation activity has been observed even though the engineering tensile stress went up to 700 MPa. We show also that antigorite does not exhibit a purely elastic‐brittle behavior since, despite the presence of defects, the specimens accumulate permanent deformation and did not fail within the elastic regime. Instead, we observe that strain localizes at grain boundaries. All observations concur to show that under these experimental conditions, grain boundary sliding is the dominant deformation mechanism. This study sheds a new light on the mechanical properties of antigorite and calls for further studies on the structure and properties of grain boundaries in antigorite and more generally in phyllosilicates.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000530895800023	Publication Date	2020-02-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2169-9313	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.9	Times cited		Open Access	OpenAccess
	Notes	We thank S. Guillot for having kindly provided us with the two antigorite samples investigated in this study. We acknowledge funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program under Grant Agreement 787198—TimeMan. H. Idrissi is mandated by the Belgian National Fund for Scientific Research (FSR‐FNRS). We acknowledge fruitful discussions with A. Baronnet. We thank J. Gasc and an anonymous reviewer for their critical comments. Data (movies of the three in situ deformation experiments) can be downloaded (from https://doi.org/10.5281/zenodo.3583135).			Approved	Most recent IF: 3.9; 2020 IF: 3.35
	Call Number	EMAT @ emat @c:irua:167594			Serial	6355
Permanent link to this record



	Author	Grieten, E.; Schalm, O.; Tack, P.; Bauters, S.; Storme, P.; Gauquelin, N.; Caen, J.; Patelli, A.; Vincze, L.; Schryvers, D.
	Title	Reclaiming the image of daguerreotypes: Characterization of the corroded surface before and after atmospheric plasma treatment			Type	A1 Journal article
	Year	2017	Publication	Journal of cultural heritage	Abbreviated Journal	J Cult Herit
	Volume		Issue		Pages
	Keywords	A1 Journal article; Art; History; Electron microscopy for materials research (EMAT); Antwerp Cultural Heritage Sciences (ARCHES)
	Abstract	Technological developments such as atmospheric plasma jets for industry can be adapted for the conservation of cultural heritage. This application might offer a potential method for the removal or transformation of the corrosion on historical photographs. We focus on daguerreotypes and present an in-depth study of the induced changes by a multi-analytical approach using optical microscopy, scanning electron microscopy, different types of transmission electron microscopy and X-ray absorption fine structure. The H2-He afterglow removes S from an Ag2S or Cu2S layer which results in a nano-layer of metallic Ag or Cu on top of the deteriorated microstructure. In case the corrosion layer is composed of Cu-Ag-S compounds, our proposed setup can be used to partially remove the corrosion. These alterations of the corrosion results in an improvement in the readability of the photographic image.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000414230700007	Publication Date	2017-06-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1296-2074	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.838	Times cited	9	Open Access	Not_Open_Access
	Notes	The authors thank Herman Maes for the daguerreotypes used in this study. The authors also acknowledge the opportunity to perform XAFS measurements at the DUBBLE beamline of the ESRF storage ring under the approval of the advisory Committee (beam time nr. 26-01-990) and acknowledge the DUBBLE beamline staff for their support. They are also grateful for the financial support by the EU-FP7 grant PANNA no. 282998 and the STIMPRO project FFB150215 of the University of Antwerp. Pieter Tack is funded by a Ph.D. grant of the Agency for Innovation by Science and Technology (IWT).			Approved	Most recent IF: 1.838
	Call Number	EMAT @ emat @c:irua:144430			Serial	4625
Permanent link to this record



	Author	Goessens, C.; Schryvers, D.; van Landuyt, J.; Amelinckx, S.; Verbeeck, A.; de Keyzer, R.
	Title	Characterization of crystal defects in mixed tabular silver halide grains by conventional transmission electron microscopy and X-ray diffractometry			Type	A1 Journal article
	Year	1991	Publication	Journal of crystal growth	Abbreviated Journal	J Cryst Growth
	Volume	110	Issue		Pages	930-941
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	A1991FL02100033	Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-0248	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.698	Times cited	40	Open Access
	Notes				Approved
	Call Number	UA @ lucian @ c:irua:48349			Serial	321
Permanent link to this record



	Author	van Renterghem, W.; Goessens, C.; Schryvers, D.; van Landuyt, J.; Verrept, P.; Bollen, D.; van Roost, C.; de Keyzer, R.
	Title	Defects and growth mechanisms of AgCl(100) tabular crystals			Type	A1 Journal article
	Year	1998	Publication	Journal of crystal growth	Abbreviated Journal	J Cryst Growth
	Volume	187	Issue		Pages	410-420
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000073710800014	Publication Date	2002-07-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-0248;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.751	Times cited	8	Open Access
	Notes				Approved	Most recent IF: 1.751; 1998 IF: 1.307
	Call Number	UA @ lucian @ c:irua:29675			Serial	625
Permanent link to this record



	Author	Goessens, C.; Schryvers, D.; van Landuyt, J.; Millan, A.; de Keyzer, R.
	Title	Electron microscopical investigation of AgBr needle crystals			Type	A1 Journal article
	Year	1995	Publication	Journal of crystal growth	Abbreviated Journal	J Cryst Growth
	Volume	151	Issue		Pages	335-341
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	A1995RE62100017	Publication Date	2003-05-19
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-0248;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.698	Times cited	14	Open Access
	Notes				Approved	MATERIALS SCIENCE, MULTIDISCIPLINARY 135/271 Q2 # PHYSICS, APPLIED 70/145 Q2 # PHYSICS, CONDENSED MATTER 40/67 Q3 #
	Call Number	UA @ lucian @ c:irua:13163			Serial	941
Permanent link to this record



	Author	Goessens, C.; Schryvers, D.; van Landuyt, J.; de Keyzer, R.
	Title	Electron microscopical investigation of tetrahedral-shaped AgBr microcrystals			Type	A1 Journal article
	Year	1997	Publication	Journal of crystal growth	Abbreviated Journal	J Cryst Growth
	Volume	172	Issue		Pages	426-432
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	A1997WL65300018	Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-0248	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.751	Times cited	15	Open Access
	Notes				Approved	Most recent IF: 1.751; 1997 IF: 1.259
	Call Number	UA @ lucian @ c:irua:21345			Serial	942
Permanent link to this record



	Author	Lumbeeck, G.; Idrissi, H.; Amin-Ahmadi, B.; Favache, A.; Delmelle, R.; Samaee, V.; Proost, J.; Pardoen, T.; Schryvers, D.
	Title	Effect of hydriding induced defects on the small-scale plasticity mechanisms in nanocrystalline palladium thin films			Type	A1 Journal Article
	Year	2018	Publication	Journal Of Applied Physics	Abbreviated Journal	J Appl Phys
	Volume	124	Issue	22	Pages	225105
	Keywords	A1 Journal Article; Electron Microscopy for Materials Science (EMAT) ;
	Abstract	Nanoindentation tests performed on nanocrystalline palladium films subjected to hydriding/dehydriding cycles demonstrate a significant softening when compared to the as-received material. The origin of this softening is unraveled by combining in situ TEM nanomechanical testing with automated crystal orientation mapping in TEM and high resolution TEM. The softening is attributed to the presence of a high density of stacking faults and of Shockley partial dislocations after hydrogen loading. The hydrogen induced defects affect the elementary plasticity mechanisms and the mechanical response by acting as preferential sites for twinning/detwinning during deformation. These results are analyzed and compared to previous experimental and simulation works in the literature. This study provides new insights into the effect of hydrogen on the atomistic deformation and cracking mechanisms as well as on the mechanical properties of nanocrystalline thin films and membranes.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000453254000025	Publication Date	2018-12-14
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0021-8979	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.068	Times cited	2	Open Access	Not_Open_Access
	Notes	This work was supported by the Hercules Foundation under Grant No. AUHA13009, the Flemish Research Fund (FWO) under Grant No. G.0365.15N, and the Flemish Strategic Initiative for Materials (SIM) under the project InterPoCo. Dr. H. Idrissi is mandated by the Belgian National Fund for Scientific Research (FSR-FNRS). We would like to thank Dr. Hadi Pirgazi from UGent for his technical support to process the ACOM data in the OIM Analysis software.			Approved	Most recent IF: 2.068
	Call Number	EMAT @ emat @c:irua:155742			Serial	5135
Permanent link to this record



	Author	Salman, O.U.; Finel, A.; Delville, R.; Schryvers, D.
	Title	The role of phase compatibility in martensite			Type	A1 Journal article
	Year	2012	Publication	Journal of applied physics T2 – 22nd International Symposium on Integrated Functionalities (ISIF), JUN 13-16, 2010, San Juan, PR	Abbreviated Journal	J Appl Phys
	Volume	111	Issue	10	Pages	103517
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Shape memory alloys inherit their macroscopic properties from their mesoscale microstructure originated from the martensitic phase transformation. In a cubic to orthorhombic transition, a single variant of martensite can have a compatible (exact) interface with the austenite for some special lattice parameters in contrast to conventional austenite/twinned martensite interface with a transition layer. Experimentally, the phase compatibility results in a dramatic drop in thermal hysteresis and gives rise to very stable functional properties over cycling. Here, we investigate the microstructures observed in Ti50Ni50-xPdx alloys that undergo a cubic to orthorhombic martensitic transformation using a three-dimensional phase field approach. We will show that the simulation results are in very good agreement with transmission electron microscopy observations. However, the understanding of the drop in thermal hysteresis requires the coupling of phase transformation with plastic activity. We will discuss this point within the framework of thermoelasticity, which is a generic feature of the martensitic transformation. (C) 2012 American Institute of Physics. [http://dx.doi.org/10.1063/1.4712629]
	Address
	Corporate Author				Thesis
	Publisher	American Institute of Physics	Place of Publication	New York, N.Y.	Editor
	Language		Wos	000305363700053	Publication Date	2012-05-21
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0021-8979;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.068	Times cited	11	Open Access
	Notes				Approved	Most recent IF: 2.068; 2012 IF: 2.210
	Call Number	UA @ lucian @ c:irua:100310			Serial	2919
Permanent link to this record



	Author	Jembrih-Simbürger, D.; Neelmeijer, C.; Schalm, O.; Fredrickx, P.; Schreiner, M.; De Vis, K.; Mäder, M.; Schryvers, D.; Caen, J.
	Title	The colour of silver stained glass : analytical investigations carried out with XRF, SEM/EDX, TEM and IBA			Type	A1 Journal article
	Year	2002	Publication	Journal of analytical atomic spectrometry	Abbreviated Journal	J Anal Atom Spectrom
	Volume	17	Issue		Pages	321-328
	Keywords	A1 Journal article; Art; Electron microscopy for materials research (EMAT); AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation)
	Abstract	Glass treated on its surface with silver compounds and an aluminosilicate, such as ochre or clay, at higher temperatures (between 550 and 650 °C) accepts a wide variety of a yellow colour. It is the aim of this study to investigate the parameters of the manufacturing process affecting the final colour of silver stained glass and to correlate them with the final colour and colour intensity. Therefore, defined mixtures of ochre and a silver compound (AgCl, AgNO3, Ag2SO4, Ag3PO4, Ag2O) were prepared and applied on soda-lime glass. The firing process was modified within the range from 563 to 630 °C and glass samples were analysed after treatment with energy dispersive X-ray fluorescence analysis (EDXRF), scanning electron microscopy (SEM/EDX), transmission electron microscopy (TEM), as well as ion beam analysis (IBA) with an external beam. Within the scope of IBA simultaneous measurements using particle-induced X-ray emission (PIXE), particle-induced gamma-ray emission (PIGE), and Rutherford backscattering spectrometry (RBS) were carried out in order to obtain the thickness of the Ag-rich surface layer and the depth distribution of Ag. By means of TEM the microstructure of the silver particles was visualised. XRF results show that the lowest amount of Ag could be detected on glass samples treated with silver stain mixtures containing AgCl and Ag2O. A low kiln temperature (e.g. 563 °C) results in a higher silver concentration at the surface and lower penetration depths. Furthermore, the results obtained with SEM/EDX at cross-sections of the glass samples could be confirmed by PIXE, PIGE, RBS, and TEM.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000175158900001	Publication Date	2002-07-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0267-9477;1364-5544;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.379	Times cited	42	Open Access
	Notes				Approved	Most recent IF: 3.379; 2002 IF: 4.250
	Call Number	UA @ lucian @ c:irua:48775			Serial	395
Permanent link to this record



	Author	Akamine, H.; Van den Bos, K.H.W.; Gauquelin, N.; Farjami, S.; Van Aert, S.; Schryvers, D.; Nishida, M.
	Title	Determination of the atomic width of an APB in ordered CoPt using quantified HAADF-STEM			Type	A1 Journal article
	Year	2015	Publication	Journal of alloys and compounds	Abbreviated Journal	J Alloy Compd
	Volume	644	Issue	644	Pages	570-574
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Anti-phase boundaries (APBs) in an ordered CoPt alloy are planar defects which disturb the ordered structure in their vicinity and decrease the magnetic properties. However, it has not yet been clarified to what extend the APBs disturb the ordering. In this study, high-resolution HAADF-STEM images are statistically analysed based on the image intensities estimated by the statistical parameter estimation theory. In the procedure, averaging intensities, fitting the intensity profiles to specific functions, and assessment based on a statistical test are performed. As a result, the APBs in the stable CoPt are found to be characterised by two atomic planes, and a contrast transition range as well as the centre of an inclined APB is determined. These results show that the APBs are quite sharp and therefore may have no notable effect on the net magnetic properties due to their small volume fraction. (C) 2015 Elsevier B.V. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000357143900083	Publication Date	2015-05-07
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0925-8388;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.133	Times cited	12	Open Access
	Notes	FWO G036815N; G036915N; G037413N; 278510 VORTEX; Hercules; ECASJO_;			Approved	Most recent IF: 3.133; 2015 IF: 2.999
	Call Number	c:irua:127008 c:irua:127008			Serial	675
Permanent link to this record



	Author	Schryvers, D.; Ma, Y.
	Title	The growth of Ni₅Al₃ in L1₀ martensite studied by in situ transmission electron microscopy and high resolution electron microscopy			Type	A1 Journal article
	Year	1995	Publication	Journal of alloys and compounds	Abbreviated Journal	J Alloy Compd
	Volume	221	Issue		Pages	227-234
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	A1995QZ73800044	Publication Date	2002-07-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0925-8388;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.999	Times cited	19	Open Access
	Notes				Approved	no
	Call Number	UA @ lucian @ c:irua:13169			Serial	1397
Permanent link to this record



	Author	Muto, S.; Schryvers, D.
	Title	In situ high resolution electron microscopy observation of electron-irradiation-induced martensitic transformation in a Ni₆₃Al₃₇ alloy			Type	A1 Journal article
	Year	1993	Publication	Journal of alloys and compounds	Abbreviated Journal	J Alloy Compd
	Volume	199	Issue	1-2	Pages	1-6
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	An electron-irradiation-induced transformation from cubic beta2 austenite to monoclinic 7M martensite was observed in situ under high resolution electron microscopy conditions in a thin foil of Ni63Al37 beta2 phase (B2, CsCl structure), with the start temperature of the martensitic transformation below but very close to room temperature. The structure of the martensite is consistent with thermoelastic or stress-induced martensite at this composition, including the existence of multiple stacking faults. The transformation is described by a gradual increase in the shear and shuffle amplitudes already existing in the precursor domains. Possible origins of the transformation are discussed.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	A1993LV15200004	Publication Date	2003-06-21
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0925-8388;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.999	Times cited	8	Open Access
	Notes				Approved	no
	Call Number	UA @ lucian @ c:irua:102953			Serial	1576
Permanent link to this record



	Author	Muto, S.; Schryvers, D.
	Title	In-situ HREM observation of electron-irradation-induced martensitic transformation in a Ni₆₃Al₃₇ alloy			Type	A1 Journal article
	Year	1993	Publication	Journal of alloys and compounds	Abbreviated Journal	J Alloy Compd
	Volume	199	Issue		Pages	1-6
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	A1993LV15200004	Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0925-8388	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.999	Times cited	8	Open Access
	Notes				Approved	no
	Call Number	UA @ lucian @ c:irua:6777			Serial	1579
Permanent link to this record



	Author	Shi, H.; Delville, R.; Srivastava, V.; James, R.D.; Schryvers, D.
	Title	Microstructural dependence on middle eigenvalue in Ti-Ni-Au			Type	A1 Journal article
	Year	2013	Publication	Journal of alloys and compounds	Abbreviated Journal	J Alloy Compd
	Volume	582	Issue		Pages	703-707
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The microstructure of various compounds of the Ti-Ni-Au alloy system is investigated by transmission electron microscopy in relation with changing lattice parameters improving the compatibility conditions between austenite and martensite expressed by the lambda(2) = 1 equation based on the Geometrically NonLinear Theory of Martensite (GNLTM). Although local differences in microstructure are observed, when increasing the gold content compound twins are replaced by Type I twins, while twinned lamellar structures are replaced by untwinned plates and self-accommodating structures when lambda(2) = 1 is approached, all confirming the predictions of the GNLTM. (c) 2013 Elsevier B.V. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000325468100114	Publication Date	2013-08-29
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0925-8388;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.133	Times cited	8	Open Access
	Notes				Approved	Most recent IF: 3.133; 2013 IF: 2.726
	Call Number	UA @ lucian @ c:irua:112209			Serial	2042
Permanent link to this record



	Author	Lu, J.B.; Shi, H.; Sedlakova-Ignacova, S.; Espinoza, R.; Kopeček, J.; Sittner, P.; Bártová, B.; Schryvers, D.
	Title	Microstructure and precipitates in annealed Co₃₈Ni₃₃Al₂₉ ferromagnetic shape memory alloy			Type	A1 Journal article
	Year	2013	Publication	Journal of alloys and compounds	Abbreviated Journal	J Alloy Compd
	Volume	572	Issue		Pages	5-10
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Transmission electron microscopy was performed to investigate the microstructure and precipitates in the annealed Co38Ni33Al29 ferromagnetic shape memory alloy. Apart from the dendritic secondary phase in the austenite matrix, micron-sized (up to 100 μm) fcc-based precipitates with partial γ′ L12 ordering and containing none, one or three {1 1 1}p parallel twin planes were found. The orientation relationship between the precipitates and matrix was found to be KurdjumovSachs. STEMEDX analysis indicates that twinned and non-twinned precipitates are Co-rich and Al- and Ni-deficient with respect to the matrix and with a lower Co/Al ratio for the latter. The 3D morphologies of precipitates were reconstructed with focused ion beam/scanning electron microscope dual-beam slice-and-view imaging, showing that the single {1 1 1}p plane twinned precipitates have a plate-like shape while the non-twinned precipitates are lath-like and often bent.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000319209600002	Publication Date	2013-04-02
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0925-8388;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.133	Times cited	10	Open Access
	Notes				Approved	Most recent IF: 3.133; 2013 IF: 2.726
	Call Number	UA @ lucian @ c:irua:107914			Serial	2058
Permanent link to this record



	Author	Cao, S.; Ke, C.B.; Zhang, X.P.; Schryvers, D.
	Title	Morphological characterization and distribution of autocatalytic-grown Ni₄Ti₃ precipitates in a Ni-Ti single crystal			Type	A1 Journal article
	Year	2013	Publication	Journal of alloys and compounds	Abbreviated Journal	J Alloy Compd
	Volume	577	Issue	S:1	Pages	215-218
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The 3D size, morphology and distribution of autocatalytic-grown Ni4Ti3 precipitates in a Ni51Ti49 single crystal were characterized via a FIB/SEM Slice-and-View procedure and phase-field simulation. Important parameters on size and shape of the precipitates were measured. The pair distribution function and the minimum distance between two precipitates from different variants were calculated to describe the 3D distribution of the autocatalytic-grown Ni4Ti3 precipitates in single crystal Ni-Ti, with a comparison to the polycrystalline Ni50.8Ti49.2 alloy. Phase-field simulation was conducted to study the nucleation behavior of precipitates in the single crystal Ni-Ti. (C) 2012 Elsevier B.V. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000329891400045	Publication Date	2012-02-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0925-8388;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.133	Times cited	5	Open Access
	Notes				Approved	Most recent IF: 3.133; 2013 IF: 2.726
	Call Number	UA @ lucian @ c:irua:114831			Serial	2203
Permanent link to this record



	Author	Schryvers, D.; Cao, S.; Pourbabak; Shi, H.; Lu
	Title	Recent EM investigations on nano-and micro-defect structures in SMAs			Type	A1 Journal article
	Year	2013	Publication	Journal of alloys and compounds	Abbreviated Journal	J Alloy Compd
	Volume	577	Issue	s:[1]	Pages	S705-S709
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The present contribution reviews some recent electron microscopy investigations on different shape memory systems in which a variety of nano- and micro-defect structures play an essential role in the functional behaviour of the material. (NiTi3)-Ti-4 precipitates in Ni-Ti are a well-known example for which the focus is now on the 3D configurations, in Ni-Ti-Nb Nb-rich nanoprecipitates are thought to have a large impact on the hysteresis, in Co-Ni-Al an Al-enriched zone nearby the y'-precipitates yields a small sandwiched austenite while some first signs of quasidynamical lattice deformation in non-frozen Ni-Ti strain glass are measured by Cs-aberration-corrected transmission electron microscopy. (C) 2011 Elsevier B.V. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher	Elsevier science sa	Place of Publication	Lausanne	Editor
	Language		Wos	000329891400146	Publication Date	2011-11-10
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0925-8388;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.133	Times cited	7	Open Access
	Notes				Approved	Most recent IF: 3.133; 2013 IF: 2.726
	Call Number	UA @ lucian @ c:irua:114832			Serial	2839
Permanent link to this record



	Author	Douglas, A.; Neethling, J.H.; Santamarta, R.; Schryvers, D.; Cornish, L.A.
	Title	Unexpected ordering behaviour of Pt₃Al intermetallic precipitates			Type	A1 Journal article
	Year	2007	Publication	Journal of alloys and compounds	Abbreviated Journal	J Alloy Compd
	Volume	432	Issue	1/2	Pages	96-102
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000245486300024	Publication Date	2006-07-13
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0925-8388;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.133	Times cited	18	Open Access
	Notes				Approved	Most recent IF: 3.133; 2007 IF: 1.455
	Call Number	UA @ lucian @ c:irua:64279			Serial	3808
Permanent link to this record



	Author	Ding, L.; Zhao, L.; Weng, Y.; Schryvers, D.; Liu, Q.; Idrissi, H.
	Title	Atomic-scale investigation of the heterogeneous precipitation in the E (Al₁₈Mg₃Cr₂) dispersoid of 7075 aluminum alloy			Type	A1 Journal article
	Year	2021	Publication	Journal Of Alloys And Compounds	Abbreviated Journal	J Alloy Compd
	Volume	851	Issue		Pages	156890
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The heterogeneous precipitation of the eta (MgZn2) phase on the E (Al18Mg3Cr2) dispersoids of the 7075 aluminum alloy was systematically investigated by atomic resolution high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) and energy dispersive X-ray spectrometry (EDX). It is found that coarse B particles are heterogeneously precipitated at the E particle interface after water quenching and isothermal aging at 120 degrees C. The incoherent E/Al interface is responsible for the high tendency of heterogeneous precipitation of the B phase. Two different orientation relationships (ORs) between the eta, E and Al matrix are identified: OR1 [2 (11) over bar0](eta)[011](E)//[(1) over bar 12](Al), (01 (1) over bar0)(eta)//(13 (3) over bar)(E)//(201)(Al), OR2 [(1) over bar 12](E)//[0001](eta)//[011](Al), (01 (1) over bar0 )(eta)//(220)(E)//(34 (4) over bar)(Al). The eta phase is preferential to nucleate along the {111}(E) or the {220}(E) planes, depending on its OR. The heterogeneous nucleation of B phase on the E particle could stabilize the E/Al interface by introducing a coherent E/eta interface, which increases the drive force of heterogeneous precipitation. The reorientation of eta phase and mutual diffusion of solute atoms could assist the coherency of the E/eta interface. The present results suggest that increasing the coherency of the E/Al interface is a promising method to suppress the heterogeneous precipitation of the eta phase. (C) 2020 Elsevier B.V. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000579868900103	Publication Date	2020-08-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0925-8388	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.133	Times cited		Open Access	OpenAccess
	Notes				Approved	Most recent IF: 3.133
	Call Number	UA @ admin @ c:irua:173503			Serial	6717
Permanent link to this record



	Author	Safdel, A.; Zarei-Hanzaki, A.; Abedi, H.R.; Pourbabak, S.; Schryvers, D.; Basu, R.
	Title	Asymmetrical superelastic behavior of thermomechanically processed semi-equiatomic NiTi alloy in tensile and compressive modes of deformation			Type	A1 Journal article
	Year	2021	Publication	Journal Of Alloys And Compounds	Abbreviated Journal	J Alloy Compd
	Volume	878	Issue		Pages	160443
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	In the present work two different cold working and annealing schemes were utilized, and the asymmetric superelastic response of thermomechanically processed materials were then assessed through cyclic tensile and compressive modes of deformation. The values of transformation stress, transformation strain, and pseudoelastic strain were measured for each treated and solutionized specimens and the asymmetric response was compared. In the solution annealed state, the difference of these parameters at different deformation modes was negligible due to the weak texture of the material, while for thermomechanically treated ones, development of specific deformation and recrystallization texture components was identified to be one of the underlying reasons of intensified asymmetry. The evolved substructure during the thermomechanical processing also played a substantial role in determining the asymmetric response. The presence of fine grains and dense dislocation substructure could hinder the movement of the transformation front, thus limiting the range of transformation. In tensile mode, the transformation stress was lower, but higher transformation strain was achieved, which was discussed relying on the slip activity in specified oriented grains. The lower transformation strain in compression mode led to lower pseudoelastic strain due to the narrow transformation range which finally degraded superelastic response of the material. (C) 2021 Elsevier B.V. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000660477400005	Publication Date	2021-05-18
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0925-8388	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.133	Times cited		Open Access	OpenAccess
	Notes				Approved	Most recent IF: 3.133
	Call Number	UA @ admin @ c:irua:179564			Serial	6855
Permanent link to this record



	Author	Schryvers, D.
	Title	SAED and HREM results suggest a NiTi B19' based superstructure for CuZr martensite			Type	A1 Journal article
	Year	1995	Publication	Journal de physique: colloques, suppléments	Abbreviated Journal
	Volume	5	Issue	8	Pages	1047-1052
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Les Ulis	Editor
	Language		Wos	A1995TX21300085	Publication Date	2014-07-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1155-4339;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	2	Open Access
	Notes				Approved	MATERIALS SCIENCE, MULTIDISCIPLINARY 96/271 Q2 #
	Call Number	UA @ lucian @ c:irua:13168			Serial	2939
Permanent link to this record



	Author	Schryvers, D.; Toth, L.; van Humbeeck, J.; Beyer, J.
	Title	Ni₂Al versus Ni₅Al₃ ordering in Ni₆₅Al₃₅ austenite and martensite			Type	A1 Journal article
	Year	1995	Publication	Journal de physique: colloques, suppléments	Abbreviated Journal
	Volume	5	Issue	8	Pages	1029-1034
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Les Ulis	Editor
	Language		Wos	A1995TX21300082	Publication Date	2014-07-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1155-4339;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	12	Open Access
	Notes				Approved	PHYSICS, APPLIED 47/145 Q2 #
	Call Number	UA @ lucian @ c:irua:13167			Serial	3548
Permanent link to this record



	Author	Seo, J.W.; Schryvers, D.
	Title	Defect structures in CuZr martensite, studies by CTEM and HRTEM			Type	A1 Journal article
	Year	1997	Publication	Journal de physique: 4	Abbreviated Journal	J Phys Iv
	Volume	C5	Issue		Pages	149-154
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Les Ulis	Editor
	Language		Wos	000072520300024	Publication Date	2007-07-11
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1155-4339;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	1	Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:21351			Serial	623
Permanent link to this record



	Author	Schryvers, D.
	Title	Electron microscopy studies of martensite microstructures			Type	A1 Journal article
	Year	1997	Publication	Journal de physique: 4	Abbreviated Journal	J Phys Iv
	Volume	C5	Issue		Pages	109-118
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Les Ulis	Editor
	Language		Wos	000072520300018	Publication Date	2007-07-11
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1155-4339;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	2	Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:21348			Serial	968
Permanent link to this record



	Author	Lexcellent, C.; Vivet, A.; Bouvet, C.; Blanc, P.; Satto, C.; Schryvers, D.
	Title	From the lattice measurements of the austenite and the martensite cells to the macroscopic mechanical behavior of shape memory alloys			Type	A1 Journal article
	Year	2001	Publication	Journal de physique: 4	Abbreviated Journal	J Phys Iv
	Volume	11	Issue	5	Pages	317-324
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Les Ulis	Editor
	Language		Wos		Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1155-4339	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:48388			Serial	1288
Permanent link to this record



	Author	Schryvers, D.; Yandouzi, M.; Holland-Moritz, D.; Toth, L.
	Title	HRTEM study of austenite and martensite in splat-cooled and nanoscale thin film Ni-Al			Type	A1 Journal article
	Year	1997	Publication	Journal de physique: 4	Abbreviated Journal	J Phys Iv
	Volume	C5	Issue		Pages	203-208
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Les Ulis	Editor
	Language		Wos	000072520300033	Publication Date	2007-07-11
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1155-4339;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	2	Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:21350			Serial	1517
Permanent link to this record



	Author	Schryvers, D.; Boullay, P.; Kohn, R.; Ball, J.
	Title	Lattice deformations at martensite-martensite interfaces in Ni-Al			Type	A1 Journal article
	Year	2001	Publication	Journal de physique: 4	Abbreviated Journal	J Phys Iv
	Volume	11	Issue		Pages	23-30
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Les Ulis	Editor
	Language		Wos	000173253800005	Publication Date	2007-09-14
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1155-4339;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	9	Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:48385			Serial	1800
Permanent link to this record



	Author	Schryvers, D.
	Title	Martensitic and bainitic transformations in Ni-Al alloys			Type	A1 Journal article
	Year	1994	Publication	Journal de physique: 4	Abbreviated Journal
	Volume	C2	Issue		Pages	225-234
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Les Ulis	Editor
	Language		Wos		Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1155-4339	ISBN		Additional Links	UA library record
	Impact Factor		Times cited		Open Access
	Notes				Approved
	Call Number	UA @ lucian @ c:irua:10014			Serial	1946
Permanent link to this record



	Author	Potapov, P.; Ochin, P.; Pons, J.; Schryvers, D.
	Title	Nanoscale inhomogeneities in melt-spun Ni-Al			Type	A1 Journal article
	Year	2001	Publication	Journal de physique: 4	Abbreviated Journal	J Phys Iv
	Volume	11	Issue		Pages	439-444
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Les Ulis	Editor
	Language		Wos	000173253800074	Publication Date	2007-09-14
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1155-4339;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	1	Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:48387			Serial	2264
Permanent link to this record