| Home | << 1 2 3 >> |
|
| Records | |||||
|---|---|---|---|---|---|
| Author | Saraiva, M.; Chen, H.; Leroy, W.P.; Mahieu, S.; Jehanathan, N.; Lebedev, O.; Georgieva, V.; Persoons, R.; Depla, D. | ||||
| Title | Influence of Al content on the properties of MgO grown by reactive magnetron sputtering | Type | A1 Journal article | ||
| Year | 2009 | Publication | Plasma processes and polymers | Abbreviated Journal | Plasma Process Polym |
| Volume | 6 | Issue  |
S:1 | Pages | S751-S754 |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT); Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract | In the present work, reactive magnetron sputtering in DC mode was used to grow complex oxide thin films, starting from two separate pure metal targets. A series of coatings was produced with a stoichiometry of the film ranging from MgO, over MgxAlyOz to Al2O3. The surface energy, crystallinity, hardness, refractive index, and surface roughness were investigated. A relationship between all properties studied and the Mg content of the samples was found. A critical compositional region for the Mg-Al-O system where all properties exhibit a change was noticed. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Weinheim | Editor | ||
| Language | Wos | 000272302900144 | Publication Date | 2009-09-08 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1612-8850; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 2.846 | Times cited | 13 | Open Access | |
| Notes | Iwt | Approved | Most recent IF: 2.846; 2009 IF: 4.037 | ||
| Call Number | UA @ lucian @ c:irua:79363 | Serial | 1613 | ||
| Permanent link to this record | |||||
| Author | Bultinck, E.; Mahieu, S.; Depla, D.; Bogaerts, A. | ||||
| Title | Particle-in-cell/Monte Carlo collisions model for the reactive sputter deposition of nitride layers | Type | A1 Journal article | ||
| Year | 2009 | Publication | Plasma processes and polymers | Abbreviated Journal | Plasma Process Polym |
| Volume | 6 | Issue |
S:1 | Pages | S784-S788 |
| Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract | A 2d3v Particle-in-cell/Monte Carlo collisions (PIC/MCC) model was constructed for an Ar/N2 reactive gas mixture in a magnetron discharge. A titanium target was used, in order to study the sputter deposition of a TiNx thin film. Cathode currents and voltages were calculated self-consistently and compared with experiments. Also, ion fluxes to the cathode were calculated, which cause sputtering of the target. The sputtered atom fluxes from the target, and to the substrate were calculated, in order to visualize the deposition of the TiNx film. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Weinheim | Editor | ||
| Language | Wos | 000272302900149 | Publication Date | 2009-09-16 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1612-8850; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 2.846 | Times cited | 2 | Open Access | |
| Notes | Approved | Most recent IF: 2.846; 2009 IF: 4.037 | |||
| Call Number | UA @ lucian @ c:irua:79364 | Serial | 2558 | ||
| Permanent link to this record | |||||
| Author | Tinck, S.; Tillocher, T.; Georgieva, V.; Dussart, R.; Neyts, E.; Bogaerts, A. | ||||
| Title | Concurrent effects of wafer temperature and oxygen fraction on cryogenic silicon etching with SF6/O2plasmas | Type | A1 Journal article | ||
| Year | 2017 | Publication | Plasma processes and polymers | Abbreviated Journal | Plasma Process Polym |
| Volume | 14 | Issue |
9 | Pages | 1700018 |
| Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract | Cryogenic plasma etching is a promising technique for high-control wafer development with limited plasma induced damage. Cryogenic wafer temperatures effectively reduce surface damage during etching, but the fundamental mechanism is not well understood. In this study, the influences of wafer temperature, gas mixture and substrate bias on the (cryogenic) etch rates of Si with SF6/O2 inductively coupled plasmas are experimentally and computationally investigated. The etch rates are measured in situ with double-point reflectometry and a hybrid computational Monte Carlo – fluid model is applied to calculate plasma properties. This work allows the reader to obtain a better insight in the effects of wafer temperature on the etch rate and to find operating conditions for successful anisotropic (cryo)etching. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000410773200012 | Publication Date | 2017-04-03 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1612-8850 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 2.846 | Times cited | Open Access | Not_Open_Access | |
| Notes | Fonds Wetenschappelijk Onderzoek, 0880.212.840 ; Hercules Foundation; Flemish Government (Department EWI); Universiteit Antwerpen; | Approved | Most recent IF: 2.846 | ||
| Call Number | PLASMANT @ plasmant @c:irua:145637 | Serial | 4708 | ||
| Permanent link to this record | |||||
| Author | Tampieri, F.; Gorbanev, Y.; Sardella, E. | ||||
| Title | Plasma‐treated liquids in medicine: Let's get chemical | Type | A1 Journal Article | ||
| Year | 2023 | Publication | Plasma Processes and Polymers | Abbreviated Journal | Plasma Processes & Polymers |
| Volume | 20 | Issue |
9 | Pages | e2300077 |
| Keywords | A1 Journal Article; Plasma, laser ablation and surface modeling Antwerp (PLASMANT) ; | ||||
| Abstract | Fundamental and applied research on plasma‐treated liquids for biomedical applications was boosted in the last few years, dictated by their advantages with respect to direct treatments. However, often, the lack of consistent analysis at a molecular level of these liquids, and of the processes used to produce them, have raised doubts of their usefulness in the clinic. The aim of this article is to critically discuss some basic aspects related to the use of plasma‐treated liquids in medicine, with a focus on their chemical composition. We analyze the main liquids used in the field, how they are affected by non‐thermal plasmas, and the possibility to replicate them without plasma treatment. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 001005060700001 | Publication Date | 2023-06-08 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1612-8850 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 3.5 | Times cited | Open Access | Not_Open_Access | |
| Notes | We thank COST Actions CA20114 (Therapeutical Applications of Cold Plasmas) and CA19110 (Plasma Applications for Smart and Sustainable Agriculture) for the stimulating environment provided. Francesco Tampieri wishes to thank Dr. Cristina Canal for the helpful discussion during the planning stage of this paper. | Approved | Most recent IF: 3.5; 2023 IF: 2.846 | ||
| Call Number | PLASMANT @ plasmant @c:irua:197386 | Serial | 8814 | ||
| Permanent link to this record | |||||
| Author | Tinck, S.; De Schepper, P.; Bogaerts, A. | ||||
| Title | Numerical investigation of SiO2 coating deposition in wafer processing reactors with SiCl4/O2/Ar inductively coupled plasmas | Type | A1 Journal article | ||
| Year | 2013 | Publication | Plasma processes and polymers | Abbreviated Journal | Plasma Process Polym |
| Volume | 10 | Issue |
8 | Pages | 714-730 |
| Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract | Simulations and experiments are performed to obtain a better insight in the plasma enhanced chemical vapor deposition process of SiO2 by SiCl4/O2/Ar plasmas for introducing a SiO2-like coating in wafer processing reactors. Reaction sets describing the plasma and surface chemistry of the SiCl4/O2/Ar mixture are presented. Typical calculation results include the bulk plasma characteristics, i.e., electrical properties, species densities, and information on important production and loss processes, as well as the chemical composition of the deposited coating, and the thickness uniformity of the film on all reactor surfaces. The film deposition characteristics, and the trends for varying discharge conditions, are explained based on the plasma behavior, as calculated by the model. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Weinheim | Editor | ||
| Language | Wos | 000327790000006 | Publication Date | 2013-05-28 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1612-8850; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 2.846 | Times cited | 3 | Open Access | |
| Notes | Approved | Most recent IF: 2.846; 2013 IF: 2.964 | |||
| Call Number | UA @ lucian @ c:irua:109900 | Serial | 2397 | ||
| Permanent link to this record | |||||
| Author | Yusupov, M.; Lackmann, J.-W.; Razzokov, J.; Kumar, S.; Stapelmann, K.; Bogaerts, A. | ||||
| Title | Impact of plasma oxidation on structural features of human epidermal growth factor | Type | A1 Journal article | ||
| Year | 2018 | Publication | Plasma processes and polymers | Abbreviated Journal | Plasma Process Polym |
| Volume | 15 | Issue |
8 | Pages | 1800022 |
| Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract | We perform computer simulations supported by experiments to investigate the oxidation of an important signaling protein, that is, human epidermal growth factor (hEGF), caused by cold atmospheric plasma (CAP) treatment. Specifically, we study the conformational changes of hEGF with different degrees of oxidation, to mimic short and long CAP treatment times. Our results indicate that the oxidized structures become more flexible, due to their conformational changes and breakage of the disulfide bonds, especially at higher oxidation degrees. MM/GBSA calculations reveal that an increasing oxidation level leads to a lower binding free energy of hEGF with its receptor. These results help to understand the fundamentals of the use of CAP for wound healing versus cancer treatment at short and longer treatment times. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000441895700004 | Publication Date | 2018-05-07 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1612-8850 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 2.846 | Times cited | 7 | Open Access | Not_Open_Access |
| Notes | Fonds Wetenschappelijk Onderzoek, 1200216N ; Bundesministerium für Bildung und Forschung, 03Z22DN12 ; | Approved | Most recent IF: 2.846 | ||
| Call Number | PLASMANT @ plasmant @c:irua:152815 | Serial | 5008 | ||
| Permanent link to this record | |||||
| Author | Teodoru, S.; Kusano, Y.; Bogaerts, A. | ||||
| Title | The effect of O2 in a humid O2/N2/NOx gas mixture on NOx and N2O remediation by an atmospheric pressure dielectric barrier discharge | Type | A1 Journal article | ||
| Year | 2012 | Publication | Plasma processes and polymers | Abbreviated Journal | Plasma Process Polym |
| Volume | 9 | Issue |
7 | Pages | 652-689 |
| Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract | A numerical model for NxOy remediation in humid air plasma produced with a dielectric barrier discharge at atmospheric pressure is presented. Special emphasis is given to NO2 and N2O reduction with the decrease of O2 content in the feedstock gas. A detailed reaction mechanism including electronic and ionic processes, as well as the contribution of radicals and excited atomic/molecular species is proposed. The temporal evolution of the densities of NO, NO2 and N2O species, and some other by-products, is analyzed, and the major pathways for the NxOy remediation are discussed for one pulse. Subsequently, simulations are presented for a multi-pulses case, where three O2 contents are tested for optimization of the remediation process. It is found that when the gas mixture O2/N2/H2O/NOx has no initial O2 content, the best NOx and N2O remediation is achieved. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Weinheim | Editor | ||
| Language | Wos | 000306279500005 | Publication Date | 2012-03-14 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1612-8850; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 2.846 | Times cited | 24 | Open Access | |
| Notes | Approved | Most recent IF: 2.846; 2012 IF: 3.730 | |||
| Call Number | UA @ lucian @ c:irua:100920 | Serial | 842 | ||
| Permanent link to this record | |||||
| Author | Somers, W.; Dubreuil, M.F.; Neyts, E.C.; Vangeneugden, D.; Bogaerts, A. | ||||
| Title | Incorporation of fluorescent dyes in atmospheric pressure plasma coatings for in-line monitoring of coating homogeneity | Type | A1 Journal article | ||
| Year | 2014 | Publication | Plasma processes and polymers | Abbreviated Journal | Plasma Process Polym |
| Volume | 11 | Issue |
7 | Pages | 678-684 |
| Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract | This paper reports on the incorporation of three commercial fluorescent dyes, i.e., rhodamine 6G, fluorescein, and fluorescent brightener 184, in plasma coatings, by utilizing a dielectric barrier discharge (DBD) reactor, and the subsequent monitoring of the coatings homogeneity based on the emitted fluorescent light. The plasma coatings are qualitatively characterized with fluorescence microscopy, UVvis spectroscopy and profilometry for the determination of the coating thickness. The emitted fluorescent light of the coating correlates to the amount of dye per area, and deviations of these factors can hence be observed by monitoring the intensity of this light. This allows monitoring the homogeneity of the plasma coatings in a fast and simple way, without making major adjustments to the process. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Weinheim | Editor | ||
| Language | Wos | 000340416300007 | Publication Date | 2014-05-03 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1612-8850; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 2.846 | Times cited | 3 | Open Access | |
| Notes | Approved | Most recent IF: 2.846; 2014 IF: 2.453 | |||
| Call Number | UA @ lucian @ c:irua:118063 | Serial | 1598 | ||
| Permanent link to this record | |||||
| Author | Van de Vijver, E.; Van Meirvenne, M.; Vandenhaute, L.; Delefortrie, S.; De Smedt, P.; Saey, T.; Seuntjens, P. | ||||
| Title | Urban soil exploration through multi-receiver electromagnetic induction and stepped-frequency ground penetrating radar | Type | A1 Journal article | ||
| Year | 2015 | Publication | Environmental science : processes & impacts | Abbreviated Journal | |
| Volume | 17 | Issue |
7 | Pages | 1271-1281 |
| Keywords | A1 Journal article; Sustainable Energy, Air and Water Technology (DuEL) | ||||
| Abstract | In environmental assessments, the characterization of urban soils relies heavily on invasive investigation, which is often insufficient to capture their full spatial heterogeneity. Non-invasive geophysical techniques enable rapid collection of high-resolution data and provide a cost-effective alternative to investigate soil in a spatially comprehensive way. This paper presents the results of combining multi-receiver electromagnetic induction and stepped-frequency ground penetrating radar to characterize a former garage site contaminated with petroleum hydrocarbons. The sensor combination showed the ability to identify and accurately locate building remains and a high-density soil layer, thus demonstrating the high potential to investigate anthropogenic disturbances of physical nature. In addition, a correspondence was found between an area of lower electrical conductivity and elevated concentrations of petroleum hydrocarbons, suggesting the potential to detect specific chemical disturbances. We conclude that the sensor combination provides valuable information for preliminary assessment of urban soils. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000357793300008 | Publication Date | 2015-06-04 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 2050-7887; 2050-7895 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | Times cited | Open Access | |||
| Notes | Approved | no | |||
| Call Number | UA @ admin @ c:irua:127130 | Serial | 8715 | ||
| Permanent link to this record | |||||
| Author | Tinck, S.; Bogaerts, A.; Shamiryan, D. | ||||
| Title | Simultaneous etching and deposition processes during the etching of silicon with a Cl2/O2/Ar inductively coupled plasma | Type | A1 Journal article | ||
| Year | 2011 | Publication | Plasma processes and polymers | Abbreviated Journal | Plasma Process Polym |
| Volume | 8 | Issue |
6 | Pages | 490-499 |
| Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract | In this article, surface processes occurring during the etching of Si with a Cl2/O2/Ar plasma are investigated by means of experiments and modeling. Cl2-based plasmas are commonly used to etch silicon, while a small fraction of O2 is added to protect the sidewalls from lateral etching during the shallow trench isolation process. When the oxygen fraction exceeds a critical value, the wafer surface process changes from an etching regime to a deposition regime, drastically reducing the etch rate. This effect is commonly referred to as the etch stop phenomenon. To gain better understanding of this mechanism, the oxygen fraction is varied in the gas mixture and special attention is paid to the effects of oxygen and of the redeposition of non-volatile etched species on the overall etch/deposition process. It is found that, when the O2 flow is increased, the etch process changes from successful etching to the formation of a rough surface, and eventually to the actual growth of an oxide layer which completely blocks the etching of the underlying Si. The size of this etch stop island was found to increase as a function of oxygen flow, while its thickness was dependent on the amount of Si etched. This suggests that the growth of the oxide layer mainly depends on the redeposition of non-volatile etch products. The abrupt change in the etch rate as a function of oxygen fraction was not found back in the oxygen content of the plasma, suggesting the competitive nature between oxidation and chlorination at the wafer. Finally, the wafer and reactor wall compositions were investigated by modeling and it was found that the surface rapidly consisted mainly of SiO2 when the O2 flow was increased above about 15 sccm. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Weinheim | Editor | ||
| Language | Wos | 000292116800003 | Publication Date | 2011-03-29 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1612-8850; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 2.846 | Times cited | 5 | Open Access | |
| Notes | Approved | Most recent IF: 2.846; 2011 IF: 2.468 | |||
| Call Number | UA @ lucian @ c:irua:90926 | Serial | 3014 | ||
| Permanent link to this record | |||||
| Author | Neyts, E.C.; Bal, K.M. | ||||
| Title | Effect of electric fields on plasma catalytic hydrocarbon oxidation from atomistic simulations | Type | A1 Journal article | ||
| Year | 2017 | Publication | Plasma processes and polymers | Abbreviated Journal | Plasma Process Polym |
| Volume | 14 | Issue |
6 | Pages | e1600158 |
| Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract | The catalytic oxidative dehydrogenation of hydrocarbons is an industrially important process, in which selectivity is a key issue. We here investigate the conversion of methanol to formaldehyde on a vanadia surface employing long timescale simulations, reaching a time scale of seconds. In particular, we compare the thermal process to the case where an additional external electric field is applied, as would be the case in a direct plasma-catalysis setup. We find that the electric field influences the retention time of the molecules at the catalyst surface. These simulations provide an atomic scale insight in the thermal catalytic oxidative dehydrogenation process, and in how an external electric field may affect this process. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Weinheim | Editor | ||
| Language | Wos | 000403699900013 | Publication Date | 2016-11-08 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1612-8850 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 2.846 | Times cited | 2 | Open Access | Not_Open_Access |
| Notes | Approved | Most recent IF: 2.846 | |||
| Call Number | UA @ lucian @ c:irua:144210 | Serial | 4647 | ||
| Permanent link to this record | |||||
| Author | Rezaei, F.; Gorbanev, Y.; Chys, M.; Nikiforov, A.; Van Hulle, S.W.H.; Cos, P.; Bogaerts, A.; De Geyter, N. | ||||
| Title | Investigation of plasma-induced chemistry in organic solutions for enhanced electrospun PLA nanofibers | Type | A1 Journal article | ||
| Year | 2018 | Publication | Plasma processes and polymers | Abbreviated Journal | Plasma Process Polym |
| Volume | 15 | Issue |
6 | Pages | 1700226 |
| Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract | Electrospinning is a versatile technique for the fabrication of polymer-based nano/microfibers. Both physical and chemical characteristics of pre-electrospinning polymer solutions affect the morphology and chemistry of electrospun nanofibers. An atmospheric-pressure plasma jet has previously been shown to induce physical modifications in polylactic acid (PLA) solutions. This work aims at investigating the plasma-induced chemistry in organic solutions of PLA, and their effects on the resultant PLA nanofibers. Therefore, very broad range of gas, liquid, and solid (nanofiber) analyzing techniques has been applied. Plasma alters the acidity of the solutions. SEM studies illustrated that complete fiber morphology enhancement only occurred when both PLA and solvent molecules were exposed to preelectrospinning plasma treatment. Additionally, the surface chemistry of the PLA nanofibers was mostly preserved. |
||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000436407300005 | Publication Date | 2018-03-24 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1612-8850 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 2.846 | Times cited | 12 | Open Access | Not_Open_Access |
| Notes | Fonds Wetenschappelijk Onderzoek, G.0379.15N ; FP7 Ideas: European Research Council, 335929 (PLASMATS) ; European Marie Sklodowska-Curie Individual Fellowship “LTPAM”, 657304 ; | Approved | Most recent IF: 2.846 | ||
| Call Number | PLASMANT @ plasmant @c:irua:152173 | Serial | 4992 | ||
| Permanent link to this record | |||||
| Author | Boënne, W.; Desmet, N.; Van Looy, S.; Seuntjens, P. | ||||
| Title | Use of online water quality monitoring for assessing the effects of WWTP overflows in rivers | Type | A1 Journal article | ||
| Year | 2014 | Publication | Environmental science : processes & impacts | Abbreviated Journal | |
| Volume | 16 | Issue |
6 | Pages | 1510-1518 |
| Keywords | A1 Journal article; Sustainable Energy, Air and Water Technology (DuEL) | ||||
| Abstract | The effects on river water quality of sewer overflows are not well known. Since the duration of the overflow is in the order of magnitude of minutes to hours, continuous measurements of water quality are needed and traditional grab sampling is unable to quantify the pollution loads. The objective of this paper was to demonstrate the applicability of high frequency measurements for assessing the impacts of waste water treatment plants on the water quality of the receiving surface water. In our in situ water quality monitoring setup, two types of multiparameter sensors mounted on a floating fixed platform were used to determine the dynamics of dissolved oxygen, specific conductivity, ammonium-N, nitrate-N and dissolved organic carbon downstream of a waste water treatment plant (WWTP), in combination with data on rainfall, river discharge and WWTP overflow discharge. The monitoring data for water quantity and water quality were used to estimate the pollution load from waste water overflow events and to assess the impact of waste water overflows on the river water quality. The effect of sewer overflow on a small river in terms of N load was shown to be significant. The WWTP overflow events accounted for about 1/3 of the river discharge. The NH4-N loads during overflow events contributed 29% and 21% to the August 2010 and June 2011 load, respectively, in only 8% and 3% of the monthly time span. The results indicate that continuous monitoring is needed to accurately represent the effects of sewer overflows in river systems. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000336841600031 | Publication Date | 2014-03-18 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 2050-7887; 2050-7895 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | Times cited | Open Access | |||
| Notes | Approved | no | |||
| Call Number | UA @ admin @ c:irua:118390 | Serial | 8722 | ||
| Permanent link to this record | |||||
| Author | Bogaerts, A.; Bultinck, E.; Eckert, M.; Georgieva, V.; Mao, M.; Neyts, E.; Schwaederlé, L. | ||||
| Title | Computer modeling of plasmas and plasma-surface interactions | Type | A1 Journal article | ||
| Year | 2009 | Publication | Plasma processes and polymers | Abbreviated Journal | Plasma Process Polym |
| Volume | 6 | Issue |
5 | Pages | 295-307 |
| Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract | In this paper, an overview is given of different modeling approaches used for describing gas discharge plasmas, as well as plasma-surface interactions. A fluid model is illustrated for describing the detailed plasma chemistry in capacitively coupled rf discharges. The strengths and limitations of Monte Carlo simulations and of a particle-in-cell-Monte Carlo collisions model are explained for a magnetron discharge, whereas the capabilities of a hybrid Monte Carlo-fluid approach are illustrated for a direct current glow discharge used for spectrochemical analysis of materials. Finally, some examples of molecular dynamics simulations, for the purpose of plasma-deposition, are given. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Weinheim | Editor | ||
| Language | Wos | 000266471800003 | Publication Date | 2009-04-20 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1612-8850;1612-8869; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 2.846 | Times cited | 18 | Open Access | |
| Notes | Approved | Most recent IF: 2.846; 2009 IF: 4.037 | |||
| Call Number | UA @ lucian @ c:irua:76833 | Serial | 461 | ||
| Permanent link to this record | |||||
| Author | Tinck, S.; Bogaerts, A. | ||||
| Title | Modeling SiH4/O2/Ar inductively coupled plasmas used for filling of microtrenches in shallow trench isolation (STI) | Type | A1 Journal article | ||
| Year | 2012 | Publication | Plasma processes and polymers | Abbreviated Journal | Plasma Process Polym |
| Volume | 9 | Issue |
5 | Pages | 522-539 |
| Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract | Modeling results are presented to gain a better insight in the properties of a SiH4/O2/Ar inductively coupled plasma (ICP) and how it interacts with a silicon substrate (wafer), as applied in the microelectronics industry for the fabrication of electronic devices. The SiH4/O2/Ar ICP is used for the filling of microtrenches with isolating material (SiO2), as applied in shallow trench isolation (STI). In this article, a detailed reaction set that describes the plasma chemistry of SiH4/O2/Ar discharges as well as surface processes, such as sputtering, oxidation, and deposition, is presented. Results are presented on the plasma properties during the plasma enhanced chemical vapor deposition process (PECVD) for different gas ratios, as well as on the shape of the filled trenches and the surface compositions of the deposited layers. For the operating conditions under study it is found that the most important species accounting for deposition are SiH2, SiH3O, SiH3 and SiH2O, while SiH+2, SiH+3, O+2 and Ar+ are the dominant species for sputtering of the surface. By diluting the precursor gas (SiH4) in the mixture, the deposition rate versus sputtering rate can be controlled for a desired trench filling process. From the calculation results it is clear that a high deposition rate will result in undesired void formation during the trench filling, while a small deposition rate will result in undesired trench bottom and mask damage by sputtering. By varying the SiH4/O2 ratio, the chemical composition of the deposited layer will be influenced. However, even at the highest SiH4/O2 ratio investigated (i.e., 3.2:1; low oxygen content), the bulk deposited layer consists mainly of SiO2, suggesting that low-volatile silane species deposit first and subsequently become oxidized instead of being oxidized first in the plasma before deposition. Finally, it was found that the top surface of the deposited layer contained less oxygen due to preferential sputtering of O atoms, making the top layer more Si-rich. However, this effect is negligible at a SiH4/O2 ratio of 2:1 or lower. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Weinheim | Editor | ||
| Language | Wos | 000303858100010 | Publication Date | 2012-03-06 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1612-8850; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 2.846 | Times cited | 5 | Open Access | |
| Notes | Approved | Most recent IF: 2.846; 2012 IF: 3.730 | |||
| Call Number | UA @ lucian @ c:irua:99127 | Serial | 2142 | ||
| Permanent link to this record | |||||
| Author | Zhang, Q.‐Z.; Zhang, L.; Yang, D.‐Z.; Schulze, J.; Wang, Y.‐N.; Bogaerts, A. | ||||
| Title | Positive and negative streamer propagation in volume dielectric barrier discharges with planar and porous electrodes | Type | A1 Journal article | ||
| Year | 2021 | Publication | Plasma Processes And Polymers | Abbreviated Journal | Plasma Process Polym |
| Volume | 18 | Issue |
4 | Pages | 2000234 |
| Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract | The spatiotemporal dynamics of volume and surface positive and negative streamers in a pintoplate volume dielectric barrier discharge is investigated in this study. The discharge characteristics are found to be completely different for positive and negative streamers. First, the spatial propagation of a positive streamer is found to rely on electron avalanches caused by photo-electrons in front of the streamer head, whereas this is not the case for negative streamers. Second, our simulations reveal an interesting phenomenon of floating positive surface discharges, which develop when a positive streamer reaches a dielectric wall and which explain the experimentally observed branching characteristics. Third, we report for the first time, the interactions between a positive streamer and dielectric pores, in which both the pore diameter and depth affect the evolution of a positive streamer. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000617876700001 | Publication Date | 2021-02-17 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1612-8850 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 2.846 | Times cited | Open Access | OpenAccess | |
| Notes | Dalian University of Technology, DUT19RC(3)045 ; National Natural Science Foundation of China, 12020101005 ; Deutsche Forschungsgemeinschaft, SFB 1316 project A5 ; Universiteit Antwerpen, TOP‐BOF ; The authors acknowledge financial support from the TOP-BOF project of the University of Antwerp. This study was carried out in part using the Turing HPC infrastructure at the CalcUA core facility of the Universiteit Antwerpen, a division of the Flemish Supercomputer Center VSC, funded by the Hercules Foundation, the Flemish Government (Department EWI), and the University of Antwerp. Funding by the German Research Foundation (DFG) in the frame of the Collaborative Research Center SFB 1316, project A5, National Natural Science Foundation of China (No. 12020101005), and the Scientific Research Foundation from Dalian University of Technology (DUT19RC(3)045) is also acknowledged. | Approved | Most recent IF: 2.846 | ||
| Call Number | PLASMANT @ plasmant @c:irua:176565 | Serial | 6744 | ||
| Permanent link to this record | |||||
| Author | Neyts, E.; Bogaerts, A.; van de Sanden, M.C.M. | ||||
| Title | Modeling PECVD growth of nanostructured carbon materials | Type | A1 Journal article | ||
| Year | 2009 | Publication | High temperature material processes | Abbreviated Journal | High Temp Mater P-Us |
| Volume | 13 | Issue |
3/4 | Pages | 399-412 |
| Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract | We present here some of our modeling efforts for PECVD growth of nanostructured carbon materials with focus on amorphous hydrogenated carbon. Experimental data from an expanding thermal plasma setup were used as input for the simulations. Attention was focused both on the film growth mechanism, as well as on the hydrocarbon reaction mechanisms during growth of the films. It is found that the reaction mechanisms and sticking coefficients are dependent on the specific surface sites, and the structural properties of the growth radicals. The film growth results are in correspondence with the experiment. Furthermore, it is found that thin a-C:H films can be densified using an additional H-flux towards the substrate. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000274202300012 | Publication Date | 2010-02-01 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1093-3611; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | Times cited | Open Access | |||
| Notes | Approved | Most recent IF: NA | |||
| Call Number | UA @ lucian @ c:irua:80991 | Serial | 2138 | ||
| Permanent link to this record | |||||
| Author | Bogaerts, A.; de Bleecker, K.; Georgieva, V.; Herrebout, D.; Kolev, I.; Madani, M.; Neyts, E. | ||||
| Title | Numerical modeling for a better understanding of gas discharge plasmas | Type | A1 Journal article | ||
| Year | 2005 | Publication | High temperature material processes | Abbreviated Journal | High Temp Mater P-Us |
| Volume | 9 | Issue |
3 | Pages | 321-344 |
| Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract | |||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000231634100001 | Publication Date | 2005-10-07 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1093-3611; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | Times cited | 1 | Open Access | ||
| Notes | Approved | Most recent IF: NA | |||
| Call Number | UA @ lucian @ c:irua:55832 | Serial | 2398 | ||
| Permanent link to this record | |||||
| Author | Lin, A.; Biscop, E.; Gorbanev, Y.; Smits, E.; Bogaerts, A. | ||||
| Title | Toward defining plasma treatment dose : the role of plasma treatment energy of pulsed‐dielectric barrier discharge in dictating in vitro biological responses | Type | A1 Journal article | ||
| Year | 2022 | Publication | Plasma Processes And Polymers | Abbreviated Journal | Plasma Process Polym |
| Volume | 19 | Issue |
3 | Pages | e2100151 |
| Keywords | A1 Journal article; Pharmacology. Therapy; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract | The energy dependence of a pulsed-dielectric barrier discharge (DBD) plasma treatment on chemical species production and biological responses was investigated. We hypothesized that the total plasma energy delivered during treatment encompasses the influence of major application parameters. A microsecond-pulsed DBD system was used to treat three different cancer cell lines and cell viability was analyzed. The energy per pulse was measured and the total plasma treatment energy was controlled by adjusting the pulse frequency, treatment time, and application distance. Our data suggest that the delivered plasma energy plays a predominant role in stimulating a biological response in vitro. This study aids in developing steps toward defining a plasma treatment unit and treatment dose for biomedical and clinical research. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000711907800001 | Publication Date | 2021-10-28 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1612-8850 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 3.5 | Times cited | Open Access | OpenAccess | |
| Notes | Approved | Most recent IF: 3.5 | |||
| Call Number | UA @ admin @ c:irua:182916 | Serial | 7219 | ||
| Permanent link to this record | |||||
| Author | Vos, L.; Van Grieken, R. | ||||
| Title | Influence of ion-source geometry in spark source-mass spectrometric analysis | Type | A1 Journal article | ||
| Year | 1984 | Publication | International journal of mass spectrometry and ion processes | Abbreviated Journal | |
| Volume | 59 | Issue |
3 | Pages | 221-229 |
| Keywords | A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation) | ||||
| Abstract | |||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | A1984TK37900001 | Publication Date | 2002-07-25 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0168-1176; 1873-2801 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | Times cited | Open Access | |||
| Notes | Approved | no | |||
| Call Number | UA @ admin @ c:irua:113618 | Serial | 8094 | ||
| Permanent link to this record | |||||
| Author | Vos, L.; Van Grieken, R. | ||||
| Title | Influence of spark generator parameters in the analysis of graphite-electrodes by spark source-mass spectrometry | Type | A1 Journal article | ||
| Year | 1984 | Publication | International journal of mass spectrometry and ion processes | Abbreviated Journal | |
| Volume | 55 | Issue |
3 | Pages | 233-247 |
| Keywords | A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation) | ||||
| Abstract | Spark source mass spectrometric analyses of doped carbon samples were performed at different pulse lengths, pulse frequencies and breakdown voltages. The pulse length and pulse frequencies had no influence on the analysis. The relation between breakdown voltage, spark gap and sample matrix was determined. With increasing breakdown voltage, the abundance of the multiply charged ions was found to decrease, whereas the abundance of the cluster ions increased. The breakdown voltage was also found to affect the absolute and relative intensities of different elements in different manners. Interpretation of these results led to some new considerations on the phenomena in a spark discharge. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | A1984SA13700002 | Publication Date | 2002-07-25 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0168-1176; 1873-2801 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | Times cited | Open Access | |||
| Notes | Approved | no | |||
| Call Number | UA @ admin @ c:irua:113619 | Serial | 8098 | ||
| Permanent link to this record | |||||
| Author | Bruynseels, F.; Van Grieken, R. | ||||
| Title | Recombination reactions and geometry effects in laser microprobe mass analysis studied with 12C/13C bilayers | Type | A1 Journal article | ||
| Year | 1986 | Publication | International journal of mass spectrometry and ion processes | Abbreviated Journal | |
| Volume | 74 | Issue |
2-3 | Pages | 161-177 |
| Keywords | A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation) | ||||
| Abstract | Bilayers of carbon, consisting of a layer of natural carbon and a second layer highly enriched in 13C, were investigated with the LAMMA 500-® instrument. When such a bilayer is perforated by the laser beam, comparable amounts of 12C and 13C are evaporated and partly ionized so that geometry effects and recombination reactions during laser-induced ionization can straightforwardly be studied. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | A1986G343200003 | Publication Date | 2002-07-25 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0168-1176; 1873-2801 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | Times cited | Open Access | |||
| Notes | Approved | no | |||
| Call Number | UA @ admin @ c:irua:113611 | Serial | 8461 | ||
| Permanent link to this record | |||||
| Author | Bogaerts, A.; de Bleecker, K.; Georgieva, V.; Kolev, I.; Madani, M.; Neyts, E. | ||||
| Title | Computer simulations for processing plasmas | Type | A1 Journal article | ||
| Year | 2006 | Publication | Plasma processes and polymers | Abbreviated Journal | Plasma Process Polym |
| Volume | 3 | Issue |
2 | Pages | 110-119 |
| Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract | |||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Weinheim | Editor | ||
| Language | Wos | 000235628300003 | Publication Date | 2006-02-02 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1612-8850;1612-8869; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 2.846 | Times cited | 8 | Open Access | |
| Notes | Approved | Most recent IF: 2.846; 2006 IF: 2.298 | |||
| Call Number | UA @ lucian @ c:irua:56076 | Serial | 465 | ||
| Permanent link to this record | |||||
| Author | Kolev, I.; Bogaerts, A. | ||||
| Title | PIC – MCC numerical simulation of a DC planar magnetron | Type | A1 Journal article | ||
| Year | 2006 | Publication | Plasma processes and polymers | Abbreviated Journal | Plasma Process Polym |
| Volume | 3 | Issue |
2 | Pages | 127-134 |
| Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract | |||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Weinheim | Editor | ||
| Language | Wos | 000235628300005 | Publication Date | 2006-02-02 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1612-8850;1612-8869; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 2.846 | Times cited | 27 | Open Access | |
| Notes | Approved | Most recent IF: 2.846; 2006 IF: 2.298 | |||
| Call Number | UA @ lucian @ c:irua:56077 | Serial | 2621 | ||
| Permanent link to this record | |||||
| Author | Cagno, S.; Hellemans, K.; Lind, O.C.; Skipperud, L.; Janssens, K.; Salbu, B. | ||||
| Title | LA-ICP-MS for Pu source identification at Mayak PA, the Urals, Russia | Type | A1 Journal article | ||
| Year | 2014 | Publication | Environmental science : processes & impacts | Abbreviated Journal | Environ Sci-Proc Imp |
| Volume | 16 | Issue |
2 | Pages | 306-312 |
| Keywords | A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation) | ||||
| Abstract | Information on Pu in environmental samples is traditionally based on the determination of the 240+239PU activity via Alpha Spectrometry (AS). A large number of alpha spectrometry sources (planchettes) containing radiochemically separated Pu are therefore stored worldwide and are available for further analyses. These archive samples represent a resource from which valuable information on isotopic composition of alpha emitters including Pu can be obtained. The relative abundances of Pu isotopes can be used to trace specific Pu sources and characterize the relative contributions of different Pu sources in a sample. Thus, in addition to the total 239+240PU activity, determination of the Pu-240/Pu-239 ratio can provide valuable information on the nature of the Pu emitting sources. The Pu isotopic ratios can be determined by mass spectrometry techniques such as Sector Field Inductively Coupled Plasma Mass Spectrometry (SF-ICPMS) or Accelerator Mass Spectrometry (AMS) that require dissolution and complete destruction of the material deposited on the planchettes. In this study Laser Ablation (LA)-quadrupole-ICP-MS has been employed for the analysis of Pu-239/Pu-240 ratios from alpha-planchettes prepared from samples originating from the Mayak PA nuclear facility, Russia. The results are compared with data from AMS and show that the Pu-240/Pu-239 ratios obtained by LA-ICP-MS can be utilized to distinguish weapons-grade Pu from civil reprocessing sources. Moreover, isotope ratio mapping can also be performed across the planchettes, allowing e.g. the visualization of possible inhomogeneities in the Pu-isotope distribution on their surface. Thus, this solid sample technique can be applied to extract additional information from existing archives of samples. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000331504100015 | Publication Date | 2013-12-09 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 2050-7887; 2050-7895 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 2.592 | Times cited | 10 | Open Access | |
| Notes | ; This work was supported by the Research Council of Norway through its Centres of Excellence funding scheme, project number 223268/F50, and the Hercules fund, Brussels (grant A11/0387). ; | Approved | Most recent IF: 2.592; 2014 IF: 2.171 | ||
| Call Number | UA @ admin @ c:irua:115791 | Serial | 5684 | ||
| Permanent link to this record | |||||
| Author | Balemans, S.; Vlaeminck, S.E.; Torfs, E.; Hartog, L.; Zaharova, L.; Rehman, U.; Nopens, I. | ||||
| Title | The impact of local hydrodynamics on high-rate activated sludge flocculation in laboratory and full-scale reactors | Type | A1 Journal article | ||
| Year | 2020 | Publication | Processes | Abbreviated Journal | |
| Volume | 8 | Issue |
2 | Pages | 131-18 |
| Keywords | A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL) | ||||
| Abstract | High rate activated sludge (HRAS) processes have a high potential for carbon and energy recovery from sewage, yet they suffer frequently from poor settleability due to flocculation issues. The process of flocculation is generally optimized using jar tests. However, detailed jar hydrodynamics are often unknown, and average quantities are used, which can significantly differ from the local conditions. The presented work combined experimental and numerical data to investigate the impact of local hydrodynamics on HRAS flocculation for two different jar test configurations (i.e., radial vs. axial impellers at different impeller velocities) and compared the hydrodynamics in these jar tests to those in a representative section of a full scale reactor using computational fluid dynamics (CFD). The analysis showed that the flocculation performance was highly influenced by the impeller type and its speed. The axial impeller appeared to be more appropriate for floc formation over a range of impeller speeds as it produced a more homogeneous distribution of local velocity gradients compared to the radial impeller. In contrast, the radial impeller generated larger volumes (%) of high velocity gradients in which floc breakage may occur. Comparison to local velocity gradients in a full scale system showed that also here, high velocity gradients occurred in the region around the impeller, which might significantly hamper the HRAS flocculation process. As such, this study showed that a model based approach was necessary to translate lab scale results to full scale. These new insights can help improve future experimental setups and reactor design for improved HRAS flocculation. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000521167900088 | Publication Date | 2020-01-24 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 2227-9717 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | Times cited | Open Access | |||
| Notes | ; This research was funded by Research Foundation Flanders (FWO SB Grant 1.S.705.18N). ; | Approved | Most recent IF: NA | ||
| Call Number | UA @ admin @ c:irua:165420 | Serial | 6543 | ||
| Permanent link to this record | |||||
| Author | Anibas, C.; Schneidewind, U.; Vandersteen, G.; Joris, I.; Seuntjens, P.; Batelaan, O. | ||||
| Title | From streambed temperature measurements to spatial-temporal flux quantification : using the LPML method to study groundwater-surface water interaction | Type | A1 Journal article | ||
| Year | 2016 | Publication | Hydrological processes | Abbreviated Journal | |
| Volume | 30 | Issue |
2 | Pages | 203-216 |
| Keywords | A1 Journal article; Sustainable Energy, Air and Water Technology (DuEL) | ||||
| Abstract | Knowledge on groundwater-surface water interaction and especially on exchange fluxes between streams and aquifers is an important prerequisite for the study of transport and fate of contaminants and nutrients in the hyporheic zone. One possibility to quantify groundwater-surface water exchange fluxes is by using heat as an environmlental tracer. Modern field equipment including multilevel temperature sticks and the novel open-source analysis tool LPML make this technique ever more attractive. The recently developed LPML method solves the one-dimensional fluid flow and heat transport equation by combining a local polynomial method with a maximum likelihood estimator. In this study, we apply the LPML method on field data to quantify the spatial and temporal variability of vertical fluxes and their uncertainties from temperature-time series measured in a Belgian lowland stream. Over several months, temperature data were collected with multilevel temperature sticks at the streambed top and at six depths for a small stream section. Long-term estimates show a range from gaining fluxes of -291 mm day(-1) to loosing fluxes of 12 mm day(-1); average seasonal fluxes ranged from -138 mm day(-1) in winter to -16 mm day(-1) in summer. With our analyses, we could determine a high spatial and temporal variability of vertical exchange fluxes for the investigated stream section. Such spatial and temporal variability should be taken into account in biogeochemical cycling of carbon, nutrients and metals and in fate analysis of contaminant plumes. In general, the stream section was gaining during most of the observation period. Two short-term high stream stage events, seemingly caused by blockage of the stream outlet, led to a change in flow direction from gaining to losing conditions. We also found more discharge occurring at the outer stream bank than at the inner one indicating a local flow-through system. With the conducted analyses, we were able to advance our understanding of the regional groundwater flow system. Copyright (C) 2015 John Wiley & Sons, Ltd. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000369164900004 | Publication Date | 2015-06-24 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 0885-6087 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | Times cited | Open Access | |||
| Notes | Approved | no | |||
| Call Number | UA @ admin @ c:irua:131587 | Serial | 7986 | ||
| Permanent link to this record | |||||
| Author | Van der Paal, J.; Fridman, G.; Bogaerts, A. | ||||
| Title | Ceramide cross-linking leads to pore formation: Potential mechanism behind CAP enhancement of transdermal drug delivery | Type | A1 Journal article | ||
| Year | 2019 | Publication | Plasma processes and polymers | Abbreviated Journal | Plasma Process Polym |
| Volume | 16 | Issue |
16 | Pages | 1900122 |
| Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract | In recent years, cold atmospheric plasma (CAP) has been proposed as a novel method to enhance transdermal drug delivery, while avoiding tissue damage. However, the underlying mechanism for the increasing skin permeability upon CAP treatment is still undefined. We propose a mechanism in which CAP-generated reactive species induce cross-linking of skin lipids, leading to the generation of nanopores, thereby facilitating the permeation of drug molecules. Molecular dynamics simulations support this proposed mechanism. Furthermore, our results indicate that to achieve maximum enhancement of the permeability, the optimal treatment will depend on the exact lipid composition of the skin, as well as on the CAP source used. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000479747500001 | Publication Date | 2019-07-30 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1612-8850 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 2.846 | Times cited | Open Access | ||
| Notes | Approved | Most recent IF: 2.846 | |||
| Call Number | UA @ admin @ c:irua:161874 | Serial | 6287 | ||
| Permanent link to this record | |||||
| Author | Garzia Trulli, M.; Claes, N.; Pype, J.; Bals, S.; Baert, K.; Terryn, H.; Sardella, E.; Favia, P.; Vanhulsel, A. | ||||
| Title | Deposition of aminosilane coatings on porous Al2O3microspheres by means of dielectric barrier discharges | Type | A1 Journal article | ||
| Year | 2017 | Publication | Plasma processes and polymers | Abbreviated Journal | Plasma Process Polym |
| Volume | 14 | Issue |
14 | Pages | 1600211 |
| Keywords | A1 Journal article; Electron microscopy for materials research (EMAT); Laboratory of adsorption and catalysis (LADCA) | ||||
| Abstract | Advances in the synthesis of porous microspheres and in their functionalization are increasing the interest in applications of alumina. This paper deals with coatings plasma deposited from 3-aminopropyltriethoxysilane by means of dielectric barrier discharges on alumina porous microspheres, shaped by a vibrational droplet coagulation technique. Aims of the work are the functionalization of the particles with active amino groups, as well as the evaluation of their surface coverage and of the penetration of the coatings into their pores. A multi-diagnostic approach was used for the chemical/morphological characterization of the particles. It was found that 5 min exposure to plasma discharges promotes the deposition of homogeneous coatings onto the microspheres and within their pores, down to 1 μm. | ||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000410773200003 | Publication Date | 2017-01-05 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1612-8850 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 2.846 | Times cited | 8 | Open Access | OpenAccess |
| Notes | The technical assistance of the VITO staff (Materials Dpt.) is gratefully acknowledged, especially D. Havermans, E. Van Hoof, R. Kemps (SEM-EDX), and A. De Wilde (Hg Porosimetry). Drs. S. Mullens and G. Scheltjens are kindly acknowledged for constructive discussions. Strategic Initiative Materials in Flanders (SIM) is gratefully acknowledged for its financial support. This research was carried out in the framework of the SIM-TRAP program (Tools for rational processing of nano-particles: controlling and tailoring nanoparticle based or nanomodified particle based materials). N. Claes and S. Bals acknowledge financial support from European Research Council (ERC Starting Grant #335078-COLOURATOM). (ROMEO:white; preprint:; postprint:restricted ; pdfversion:cannot); saraecas; ECAS_Sara; | Approved | Most recent IF: 2.846 | ||
| Call Number | EMAT @ emat @ c:irua:139511UA @ admin @ c:irua:139511 | Serial | 4342 | ||
| Permanent link to this record | |||||
| Author | Belov, I.; Vanneste, J.; Aghaee, M.; Paulussen, S.; Bogaerts, A. | ||||
| Title | Synthesis of Micro- and Nanomaterials in CO2and CO Dielectric Barrier Discharges: Synthesis of Micro- and Nanomaterials… | Type | A1 Journal article | ||
| Year | 2017 | Publication | Plasma processes and polymers | Abbreviated Journal | Plasma Process Polym |
| Volume | 14 | Issue |
14 | Pages | 1600065 |
| Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
| Abstract | Dielectric Barrier Discharges operating in CO and CO2 form solid products at atmospheric pressure. The main differences between both plasmas and their deposits were analyzed, at similar energy input. GC measurements revealed a mixture of CO2, CO, and O2 in the CO2 DBD exhaust, while no O2 was found in the CO plasma. A coating of nanoparticles composed of Fe, O, and C was produced by the CO2 discharge, whereas, a microscopic dendrite-like carbon structure was formed in the CO plasma. Fe3O4 and Fe crystalline phases were found in the CO2 sample. The CO deposition was characterized as an amorphous structure, close to polymeric CO (p-CO). Interestingly, p-CO is not formed in the CO2 plasma, in spite of the significant amounts of CO produced (up to 30% in the reactor exhaust). |
||||
| Address | |||||
| Corporate Author | Thesis | ||||
| Publisher | Place of Publication | Editor | |||
| Language | Wos | 000397476000007 | Publication Date | 2016-07-29 | |
| Series Editor | Series Title | Abbreviated Series Title | |||
| Series Volume | Series Issue | Edition | |||
| ISSN | 1612-8850 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
| Impact Factor | 2.846 | Times cited | 10 | Open Access | Not_Open_Access |
| Notes | European Union Seventh Framework Programme FP7-PEOPLE-2013-ITN, 606889 ; | Approved | Most recent IF: 2.846 | ||
| Call Number | PLASMANT @ plasmant @ c:irua:141759 | Serial | 4487 | ||
| Permanent link to this record | |||||