| Records |
| Author |
Amin-Ahmadi, B.; Idrissi, H.; Delmelle, R.; Pardoen, T.; Proost, J.; Schryvers, D. |
| Title |
High resolution transmission electron microscopy characterization of fcc -> 9R transformation in nanocrystalline palladium films due to hydriding |
Type |
A1 Journal article |
| Year |
2013 |
Publication |
Applied physics letters |
Abbreviated Journal |
Appl Phys Lett |
| Volume |
102 |
Issue |
7 |
Pages |
071911-71914 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
Sputtered nanocrystalline palladium thin films with nanoscale growth twins have been subjected to hydriding cycles. The evolution of the twin boundaries has been investigated using high resolution transmission electron microscopy. Surprisingly, the Sigma 3{112} incoherent twin boundaries dissociate after hydriding into two phase boundaries bounding a 9R phase. This phase which corresponds to single stacking faults located every three {111} planes in the fcc Pd structure was not expected because of the high stacking fault energy of Pd. This observation is connected to the influence of the Hydrogen on the stacking fault energy of palladium and the high compressive stresses building up during hydriding. (C) 2013 American Institute of Physics. [http://dx.doi.org/10.1063/1.4793512] |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
American Institute of Physics |
Place of Publication |
New York, N.Y. |
Editor |
|
| Language |
|
Wos |
000315596700023 |
Publication Date |
2013-02-26 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
ISSN  |
0003-6951; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.411 |
Times cited |
14 |
Open Access |
|
| Notes |
Iap |
Approved |
Most recent IF: 3.411; 2013 IF: 3.515 |
| Call Number |
UA @ lucian @ c:irua:108303 |
Serial |
1462 |
| Permanent link to this record |
| |
|
| |
| Author |
Salje, E.K.H.; Zhang, H.; Schryvers, D.; Bartova, B. |
| Title |
Quantitative Landau potentials for the martensitic transformation in Ni-Al |
Type |
A1 Journal article |
| Year |
2007 |
Publication |
Applied physics letters |
Abbreviated Journal |
Appl Phys Lett |
| Volume |
90 |
Issue |
22 |
Pages |
221903,1-3 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
|
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
American Institute of Physics |
Place of Publication |
New York, N.Y. |
Editor |
|
| Language |
|
Wos |
000246909900020 |
Publication Date |
2007-05-30 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0003-6951; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.411 |
Times cited |
9 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 3.411; 2007 IF: 3.596 |
| Call Number |
UA @ lucian @ c:irua:64777 |
Serial |
2757 |
| Permanent link to this record |
| |
|
| |
| Author |
Idrissi, H.; Kobler, A.; Amin-Ahmadi, B.; Coulombier, M.; Galceran, M.; Raskin, J.-P.; Godet, S.; Kuebel, C.; Pardoen, T.; Schryvers, D. |
| Title |
Plasticity mechanisms in ultrafine grained freestanding aluminum thin films revealed by in-situ transmission electron microscopy nanomechanical testing |
Type |
A1 Journal article |
| Year |
2014 |
Publication |
Applied physics letters |
Abbreviated Journal |
Appl Phys Lett |
| Volume |
104 |
Issue |
10 |
Pages |
101903 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
In-situ bright field transmission electron microscopy (TEM) nanomechanical tensile testing and in-situ automated crystallographic orientation mapping in TEM were combined to unravel the elementary mechanisms controlling the plasticity of ultrafine grained Aluminum freestanding thin films. The characterizations demonstrate that deformation proceeds with a transition from grain rotation to intragranular dislocation glide and starvation plasticity mechanism at about 1% deformation. The grain rotation is not affected by the character of the grain boundaries. No grain growth or twinning is detected. (C) 2014 AIP Publishing LLC. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
American Institute of Physics |
Place of Publication |
New York, N.Y. |
Editor |
|
| Language |
|
Wos |
000333082800022 |
Publication Date |
2014-03-12 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0003-6951;1077-3118; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.411 |
Times cited |
24 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 3.411; 2014 IF: 3.302 |
| Call Number |
UA @ lucian @ c:irua:116866 |
Serial |
2649 |
| Permanent link to this record |
| |
|
| |
| Author |
Vanhumbeeck, J.-F.; Tian, H.; Schryvers, D.; Proost, J. |
| Title |
Stress-assisted crystallisation in anodic titania |
Type |
A1 Journal article |
| Year |
2011 |
Publication |
Corrosion science |
Abbreviated Journal |
Corros Sci |
| Volume |
53 |
Issue |
4 |
Pages |
1269-1277 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
The relationship between the microstructural and internal stress evolution during Ti anodising is discussed. Samples anodised galvanostatically to 12 V and 40 V, corresponding to different stages of the internal stress evolution, were examined by in-plane and cross-section transmission electron microscopy. Electron diffraction patterns have been complemented with stoichiometry data obtained from energy loss near edge structure spectra. The sample anodised to 40 V was observed to consist of two regions, with a crystallised inner region adjacent to the metal/oxide interface. Crystallisation of this region is associated with the presence of large compressive internal stresses which build up during anodising up to 12 V. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
Oxford |
Editor |
|
| Language |
|
Wos |
000288972000016 |
Publication Date |
2010-12-31 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0010-938X; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
5.245 |
Times cited |
11 |
Open Access |
|
| Notes |
Fwo |
Approved |
Most recent IF: 5.245; 2011 IF: 3.734 |
| Call Number |
UA @ lucian @ c:irua:88385 |
Serial |
3177 |
| Permanent link to this record |
| |
|
| |
| Author |
Gong, X.; Marmy, P.; Volodin, A.; Amin-Ahmadi, B.; Qin, L.; Schryvers, D.; Gavrilov, S.; Stergar, E.; Verlinden, B.; Wevers, M.; Seefeldt, M. |
| Title |
Multiscale investigation of quasi-brittle fracture characteristics in a 9Cr–1Mo ferritic–martensitic steel embrittled by liquid lead–bismuth under low cycle fatigue |
Type |
A1 Journal article |
| Year |
2016 |
Publication |
Corrosion science |
Abbreviated Journal |
|
| Volume |
102 |
Issue |
102 |
Pages |
137-152 |
| Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
| Abstract |
Liquid metal embrittlement (LME) induced quasi-brittle fracture characteristics of a 9Cr–1Mo ferritic–martensitic steel (T91) after fatigue cracking in lead–bismuth eutectic (LBE) have been investigated at various length scales. The results show that the LME fracture morphology is primarily characterized by quasi-brittle translath flat regions partially covered by nanodimples, shallow secondary cracks propagating along the martensitic lath boundaries as well as tear ridges covered by micro dimples. These diverse LME fracture features likely indicate a LME mechanism involving multiple physical processes, such as weakening induced interatomic decohesion at the crack tip and plastic shearing induced nano/micro voiding in the plastic zone. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
000367275700014 |
Publication Date |
2015-10-22 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0010938X |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
|
Times cited |
16 |
Open Access |
|
| Notes |
The work is financially supported by the MYRRHA project,SCK•CEN, Belgium and partly funded by the European AtomicEnergy Community’s (Euratom) Seventh Framework ProgrammeFP7/2007-2013 under grant agreement No. 604862 (MatISSEproject) and in the framework of the EERA (European EnergyResearch Alliance) Joint Programme on Nuclear Materials. Dr. TomVan der Donck (KU Leuven) is acknowledged for the EBSD mea-surements. The authors are grateful to Dr. Van Renterghem Wouter(SCK•CEN) for fruitful discussion of the TEM results. Xing Gongsincerely acknowledges valuable suggestions from Dr. S.P. Lynch(Defence Science and Technology Organisation and Monash Uni-versity, Melbourne, Australia). |
Approved |
Most recent IF: NA |
| Call Number |
c:irua:129997 |
Serial |
4013 |
| Permanent link to this record |
| |
|
| |
| Author |
Charalampopoulou, E.; Delville, R.; Verwerft, M.; Lambrinou, K.; Schryvers, D. |
| Title |
Transmission electron microscopy study of complex oxide scales on DIN 1.4970 steel exposed to liquid Pb-Bi eutectic |
Type |
A1 Journal article |
| Year |
2019 |
Publication |
Corrosion science |
Abbreviated Journal |
Corrosion Science |
| Volume |
147 |
Issue |
|
Pages |
22-31 |
| Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
| Abstract |
The deployment of Gen-IV lead-cooled fast reactors requires a good compatibility between the selected structural/cladding steels and the inherently corrosive heavy liquid metal coolant. An effective liquid metal corrosion mitigation strategy involves the in-situ steel passivation in contact with the oxygen-containing Pb-alloy coolant. Transmission electron microscopy was used in this work to study the multi-layered oxide scales forming on an austenitic stainless steel fuel cladding exposed to oxygen-containing (CO ≈ 10−6 mass%) static liquid leadbismuth eutectic (LBE) for 1000 h between 400 and 500 °C. The oxide scale constituents were analyzed, including the intertwined phases comprising the innermost biphasic layer. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
000456902100003 |
Publication Date |
2018-10-31 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0010938X |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
|
Times cited |
5 |
Open Access |
OpenAccess |
| Notes |
The authors would like to thank J. Joris for the technical support during corrosion testing and J. Lim for the manufacturing and calibration of the oxygen sensors and oxygen pumps used in this work. E. Charalampopoulou personally thanks H. Heidari, S. Pourbabak, A. Orekhov (EMAT) and N. Cautaerts (EMAT, SCK•CEN), for their valuable help with the training of the FEI Tecnai Osiris S/TEM and Jeol 3000 S/ TEM, respectively, as well as S. Van den Broeck (EMAT), J. Pakarinen (SCK•CEN) and W. Van Renterghem (SCK•CEN) for FIB sample preparation. Moreover, the authors gratefully acknowledge the funding provided in the framework of the ongoing development of the MYRRHA irradiation facility. The research leading to these results falls within the framework of the European Energy Research Alliance Joint Programme on Nuclear Materials (EERA JPNM). |
Approved |
Most recent IF: NA |
| Call Number |
EMAT @ emat @UA @ admin @ c:irua:157541 |
Serial |
5164 |
| Permanent link to this record |
| |
|
| |
| Author |
Schryvers, D.; Boullay, P.; Potapov, P.L.; Kohn, R.V.; Ball, J.M. |
| Title |
Microstructures and interfaces in Ni-Al martensite: comparing HRTEM observations with continuum theories |
Type |
A1 Journal article |
| Year |
2002 |
Publication |
International journal of solids and structures |
Abbreviated Journal |
Int J Solids Struct |
| Volume |
39 |
Issue |
|
Pages |
3543-3554 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
|
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
Oxford |
Editor |
|
| Language |
|
Wos |
000176752500014 |
Publication Date |
2002-10-14 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0020-7683; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
2.76 |
Times cited |
13 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 2.76; 2002 IF: 1.080 |
| Call Number |
UA @ lucian @ c:irua:48771 |
Serial |
2078 |
| Permanent link to this record |
| |
|
| |
| Author |
Lumbeeck, G.; Idrissi, H.; Amin-Ahmadi, B.; Favache, A.; Delmelle, R.; Samaee, V.; Proost, J.; Pardoen, T.; Schryvers, D. |
| Title |
Effect of hydriding induced defects on the small-scale plasticity mechanisms in nanocrystalline palladium thin films |
Type |
A1 Journal Article |
| Year |
2018 |
Publication |
Journal Of Applied Physics |
Abbreviated Journal |
J Appl Phys |
| Volume |
124 |
Issue |
22 |
Pages |
225105 |
| Keywords |
A1 Journal Article; Electron Microscopy for Materials Science (EMAT) ; |
| Abstract |
Nanoindentation tests performed on nanocrystalline palladium films subjected to hydriding/dehydriding cycles demonstrate a significant softening when compared to the as-received material. The origin of this softening is unraveled by combining in situ TEM nanomechanical testing with automated crystal orientation mapping in TEM and high resolution TEM. The softening is attributed to the presence of a high density of stacking faults and of Shockley partial dislocations after hydrogen loading. The hydrogen induced defects affect the elementary plasticity mechanisms and the mechanical response by acting as preferential sites for twinning/detwinning during deformation. These results are analyzed and compared to previous experimental and simulation works in the literature. This study provides new insights into the effect of hydrogen on the atomistic deformation and cracking mechanisms as well as on the mechanical properties of nanocrystalline thin films and membranes. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
000453254000025 |
Publication Date |
2018-12-14 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0021-8979 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
2.068 |
Times cited |
2 |
Open Access |
Not_Open_Access |
| Notes |
This work was supported by the Hercules Foundation under Grant No. AUHA13009, the Flemish Research Fund (FWO) under Grant No. G.0365.15N, and the Flemish Strategic Initiative for Materials (SIM) under the project InterPoCo. Dr. H. Idrissi is mandated by the Belgian National Fund for Scientific Research (FSR-FNRS). We would like to thank Dr. Hadi Pirgazi from UGent for his technical support to process the ACOM data in the OIM Analysis software. |
Approved |
Most recent IF: 2.068 |
| Call Number |
EMAT @ emat @c:irua:155742 |
Serial |
5135 |
| Permanent link to this record |
| |
|
| |
| Author |
Salman, O.U.; Finel, A.; Delville, R.; Schryvers, D. |
| Title |
The role of phase compatibility in martensite |
Type |
A1 Journal article |
| Year |
2012 |
Publication |
Journal of applied physics
T2 – 22nd International Symposium on Integrated Functionalities (ISIF), JUN 13-16, 2010, San Juan, PR |
Abbreviated Journal |
J Appl Phys |
| Volume |
111 |
Issue |
10 |
Pages |
103517 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
Shape memory alloys inherit their macroscopic properties from their mesoscale microstructure originated from the martensitic phase transformation. In a cubic to orthorhombic transition, a single variant of martensite can have a compatible (exact) interface with the austenite for some special lattice parameters in contrast to conventional austenite/twinned martensite interface with a transition layer. Experimentally, the phase compatibility results in a dramatic drop in thermal hysteresis and gives rise to very stable functional properties over cycling. Here, we investigate the microstructures observed in Ti50Ni50-xPdx alloys that undergo a cubic to orthorhombic martensitic transformation using a three-dimensional phase field approach. We will show that the simulation results are in very good agreement with transmission electron microscopy observations. However, the understanding of the drop in thermal hysteresis requires the coupling of phase transformation with plastic activity. We will discuss this point within the framework of thermoelasticity, which is a generic feature of the martensitic transformation. (C) 2012 American Institute of Physics. [http://dx.doi.org/10.1063/1.4712629] |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
American Institute of Physics |
Place of Publication |
New York, N.Y. |
Editor |
|
| Language |
|
Wos |
000305363700053 |
Publication Date |
2012-05-21 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0021-8979; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
2.068 |
Times cited |
11 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 2.068; 2012 IF: 2.210 |
| Call Number |
UA @ lucian @ c:irua:100310 |
Serial |
2919 |
| Permanent link to this record |
| |
|
| |
| Author |
Goessens, C.; Schryvers, D.; van Landuyt, J.; Amelinckx, S.; Verbeeck, A.; de Keyzer, R. |
| Title |
Characterization of crystal defects in mixed tabular silver halide grains by conventional transmission electron microscopy and X-ray diffractometry |
Type |
A1 Journal article |
| Year |
1991 |
Publication |
Journal of crystal growth |
Abbreviated Journal |
J Cryst Growth |
| Volume |
110 |
Issue |
|
Pages |
930-941 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
|
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
Amsterdam |
Editor |
|
| Language |
|
Wos |
A1991FL02100033 |
Publication Date |
0000-00-00 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0022-0248 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
1.698 |
Times cited |
40 |
Open Access |
|
| Notes |
|
Approved |
|
| Call Number |
UA @ lucian @ c:irua:48349 |
Serial |
321 |
| Permanent link to this record |
| |
|
| |
| Author |
Goessens, C.; Schryvers, D.; van Landuyt, J.; de Keyzer, R. |
| Title |
Electron microscopical investigation of tetrahedral-shaped AgBr microcrystals |
Type |
A1 Journal article |
| Year |
1997 |
Publication |
Journal of crystal growth |
Abbreviated Journal |
J Cryst Growth |
| Volume |
172 |
Issue |
|
Pages |
426-432 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
|
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
Amsterdam |
Editor |
|
| Language |
|
Wos |
A1997WL65300018 |
Publication Date |
0000-00-00 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0022-0248 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
1.751 |
Times cited |
15 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 1.751; 1997 IF: 1.259 |
| Call Number |
UA @ lucian @ c:irua:21345 |
Serial |
942 |
| Permanent link to this record |
| |
|
| |
| Author |
van Renterghem, W.; Goessens, C.; Schryvers, D.; van Landuyt, J.; Verrept, P.; Bollen, D.; van Roost, C.; de Keyzer, R. |
| Title |
Defects and growth mechanisms of AgCl(100) tabular crystals |
Type |
A1 Journal article |
| Year |
1998 |
Publication |
Journal of crystal growth |
Abbreviated Journal |
J Cryst Growth |
| Volume |
187 |
Issue |
|
Pages |
410-420 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
|
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
Amsterdam |
Editor |
|
| Language |
|
Wos |
000073710800014 |
Publication Date |
2002-07-25 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0022-0248; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
1.751 |
Times cited |
8 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 1.751; 1998 IF: 1.307 |
| Call Number |
UA @ lucian @ c:irua:29675 |
Serial |
625 |
| Permanent link to this record |
| |
|
| |
| Author |
Goessens, C.; Schryvers, D.; van Landuyt, J.; Millan, A.; de Keyzer, R. |
| Title |
Electron microscopical investigation of AgBr needle crystals |
Type |
A1 Journal article |
| Year |
1995 |
Publication |
Journal of crystal growth |
Abbreviated Journal |
J Cryst Growth |
| Volume |
151 |
Issue |
|
Pages |
335-341 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
|
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
Amsterdam |
Editor |
|
| Language |
|
Wos |
A1995RE62100017 |
Publication Date |
2003-05-19 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0022-0248; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
1.698 |
Times cited |
14 |
Open Access |
|
| Notes |
|
Approved |
MATERIALS SCIENCE, MULTIDISCIPLINARY 135/271 Q2 # PHYSICS, APPLIED 70/145 Q2 # PHYSICS, CONDENSED MATTER 40/67 Q3 # |
| Call Number |
UA @ lucian @ c:irua:13163 |
Serial |
941 |
| Permanent link to this record |
| |
|
| |
| Author |
Ding, L.; Orekhov, A.; Weng, Y.; Jia, Z.; Idrissi, H.; Schryvers, D.; Muraishi, S.; Hao, L.; Liu, Q. |
| Title |
Study of the Q′ (Q)-phase precipitation in Al–Mg–Si–Cu alloys by quantification of atomic-resolution transmission electron microscopy images and atom probe tomography |
Type |
A1 Journal article |
| Year |
2019 |
Publication |
Journal of materials science |
Abbreviated Journal |
J Mater Sci |
| Volume |
54 |
Issue |
10 |
Pages |
7943-7952 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
The precipitation mechanism of the Q phase in Al-Mg-Si-Cu alloys has long been the subject of ambiguity and debate since its metastable phase (Q 0) has the same crystal structure and similar lattice parameters as its equilibrium counterparts. In the present work, the evolution of the Q 0 (Q) phase during aging is studied by combination of quantitative atomic-resolution scanning transmission electron microscopy and atom probe tomography. It was found that the transformation from the Q 0 to the Q phase involves changes of the occupancy of Al atoms in atomic columns of the Q 0 (Q) phase. The Al atoms incorporated in the Cu, Si and Mg columns are gradually released into the Al matrix, while mixing between Cu and Si atoms occurs in the Si columns. This transformation process is mainly attributed to the low lattice misfit of the equilibrium Q phase. Besides, the formation of various compositions of the Q phase is due to the different occupancy in the atomic columns of the Q phase. The occupancy changes in the columns of the Q phase are kinetically controlled and are strongly influenced by the alloy composition and aging temperature. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
000460069500043 |
Publication Date |
2019-02-14 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0022-2461 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
2.599 |
Times cited |
1 |
Open Access |
Not_Open_Access |
| Notes |
Special major R & D Projects for Key Technology Innovation of Key Industries in Chongqing, cstc2017zdcy-zdzxX0006 ; Fundamental Research Funds for the Central Universities of China, 2018CDGFCL0002 106112017CDJQJ308822 ; Belgian National Fund for Scientific Research; the National Natural Science Foundation of China, 51871035 ; This work was supported by the Special major R & D Projects for Key Technology Innovation of Key Industries in Chongqing (Grant No. cstc2017zdcyzdzxX0006), the Fundamental Research Funds for the Central Universities of China (Grant No. 2018CDGFCL0002), the National Natural Science Foundation of China (Grant No. 51871035) and the Foundation for Innovative Research Groups J Mater Sci National Natural Science Foundation of China (Grant No. 51421001). H. Idrissi is mandated by the Belgian National Fund for Scientific Research (FSR-FNRS). |
Approved |
Most recent IF: 2.599 |
| Call Number |
EMAT @ emat @UA @ admin @ c:irua:158112 |
Serial |
5158 |
| Permanent link to this record |
| |
|
| |
| Author |
Verleysen, E.; Bender, H.; Richard, O.; Schryvers, D.; Vandervorst, W. |
| Title |
Compositional characterization of nickel silicides by HAADF-STEM imaging |
Type |
A1 Journal article |
| Year |
2011 |
Publication |
Journal of materials science |
Abbreviated Journal |
J Mater Sci |
| Volume |
46 |
Issue |
7 |
Pages |
2001-2008 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
A methodology for the quantitative compositional characterization of nickel silicides by high angle annular dark field scanning transmission electron microscopy (HAADF-STEM) imaging is presented. HAADF-STEM images of a set of nickel silicide reference samples Ni3Si, Ni31Si12, Ni2Si, NiSi and NiSi2 are taken at identical experimental conditions. The correlation between sample thickness and HAADF-STEM intensity is discussed. In order to quantify the relationship between the experimental Z-contrast intensities and the composition of the analysed layers, the ratio of the HAADF-STEM intensity to the sample thickness or to the intensity of the silicon substrate is determined for each nickel silicide reference sample. Diffraction contrast is still detected on the HAADF-STEM images, even though the detector is set at the largest possible detection angle. The influence on the quantification results of intensity fluctuations caused by diffraction contrast and channelling is examined. The methodology is applied to FUSI gate devices and to horizontal TFET devices with different nickel silicides formed on source, gate and drain. It is shown that, if the elements which are present are known, this methodology allows a fast quantitative 2-dimensional compositional analysis. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
London |
Editor |
|
| Language |
|
Wos |
000286633000002 |
Publication Date |
2011-01-06 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0022-2461;1573-4803; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
2.599 |
Times cited |
1 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 2.599; 2011 IF: 2.015 |
| Call Number |
UA @ lucian @ c:irua:88950 |
Serial |
446 |
| Permanent link to this record |
| |
|
| |
| Author |
Ramachandran, D.; Egoavil, R.; Crabbe, A.; Hauffman, T.; Abakumov, A.; Verbeeck, J.; Vandendael, I.; Terryn, H.; Schryvers, D. |
| Title |
TEM and AES investigations of the natural surface nano-oxide layer of an AISI 316L stainless steel microfibre |
Type |
A1 Journal article |
| Year |
2016 |
Publication |
Journal of microscopy |
Abbreviated Journal |
J Microsc-Oxford |
| Volume |
264 |
Issue |
264 |
Pages |
207-214 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
The chemical composition, nanostructure and electronic structure of nanosized oxide scales naturally formed on the surface of AISI 316L stainless steel microfibres used for strengthening of composite materials have been characterised using a combination of scanning and transmission electron microscopy with energy-dispersive X-ray, electron energy loss and Auger spectroscopy. The analysis reveals the presence of three sublayers within the total surface oxide scale of 5.0-6.7 nm thick: an outer oxide layer rich in a mixture of FeO.Fe2 O3 , an intermediate layer rich in Cr2 O3 with a mixture of FeO.Fe2 O3 and an inner oxide layer rich in nickel. |
| Address |
Electron Microscopy for Materials Science, University of Antwerp, Antwerp, Belgium |
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
English |
Wos |
000385944300009 |
Publication Date |
2016-06-17 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0022-2720 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
1.692 |
Times cited |
12 |
Open Access |
|
| Notes |
This work was supported by SIM vzw, Technologiepark 935, BE-9052 Zwijnaarde, Belgium, within the InterPoCo project of the H-INT-S horizontal program. The authors are also thankful to Stijn Van den Broeck for help in FIB sample preparation, to Hamed Heidari for useful comments and to the N.V. Bekaert S.A. company for providing the microfibres. RE acknowledges funding by the European Union Council under the 7th Framework Program (FP7) grant nr NMP3-LA-2010-246102 IFOX. |
Approved |
Most recent IF: 1.692 |
| Call Number |
c:irua:134087 |
Serial |
4096 |
| Permanent link to this record |
| |
|
| |
| Author |
Lu, J.; Bartholomeeusen, E.; Sels, B.F.; Schryvers, D. |
| Title |
Internal architecture of coffin-shaped ZSM-5 zeolite crystals with hourglass contrast unravelled by focused ion beam-assisted transmission electron microscopy: INTERNAL ARCHITECTURE OF COFFIN-SHAPED |
Type |
A1 Journal article |
| Year |
2017 |
Publication |
Journal of microscopy |
Abbreviated Journal |
J Microsc-Oxford |
| Volume |
265 |
Issue |
265 |
Pages |
27-33 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
Optical microscopy, focused ion beam and transmission electron microscopy are combined to study the internal architecture in a coffin-shaped ZSM-5 crystal showing an hourglass contrast in optical microscopy. Based on parallel lamellas from different positions in the crystal, the orientation relationships between the intergrowth components of the crystal are studied and the internal architecture and growth mechanism are illustrated. The crystal is found to contain two pyramid-like components aside from a central component. Both pyramid-like components are rotated by 90 degrees along the common c-axis and with respect to the central component while the interfaces between the components show local zig-zag feature, the latter indicating variations in relative growth velocity of the two components. The pyramid-like intergrowth components are larger and come closer to one another in the middle of the crystal than at the edges, but they do not connect. A model of multisite nucleation and growth of 90 degrees intergrowth components is proposed. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
000392487400004 |
Publication Date |
2016-08-19 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0022-2720 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
1.692 |
Times cited |
4 |
Open Access |
OpenAccess |
| Notes |
Fonds Wetenschappelijk Onderzoek, G.0603.10N ; |
Approved |
Most recent IF: 1.692 |
| Call Number |
EMAT @ emat @ c:irua:141015 |
Serial |
4437 |
| Permanent link to this record |
| |
|
| |
| Author |
Cautaerts, N.; Delville, R.; Schryvers, D. |
| Title |
ALPHABETA: a dedicated open-source tool for calculating TEM stage tilt angles |
Type |
A1 Journal article |
| Year |
2019 |
Publication |
Journal of microscopy |
Abbreviated Journal |
J Microsc-Oxford |
| Volume |
273 |
Issue |
3 |
Pages |
189-198 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
|
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
000458426100004 |
Publication Date |
2018-12-24 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0022-2720 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
1.692 |
Times cited |
2 |
Open Access |
Not_Open_Access |
| Notes |
ENGIE Ph.D. sponsorship, 2015-AC-007 – BSUEZ6900 ; |
Approved |
Most recent IF: 1.692 |
| Call Number |
EMAT @ emat @UA @ admin @ c:irua:157474 |
Serial |
5163 |
| Permanent link to this record |
| |
|
| |
| Author |
Verleysen, E.; Bender, H.; Richard, O.; Schryvers, D.; Vandervorst, W. |
| Title |
Characterization of nickel silicides using EELS-based methods |
Type |
A1 Journal article |
| Year |
2010 |
Publication |
Journal of microscopy |
Abbreviated Journal |
J Microsc-Oxford |
| Volume |
240 |
Issue |
1 |
Pages |
75-82 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
The characterization of Ni-silicides using electron energy loss spectroscopy (EELS) based methods is discussed. A series of Ni-silicide phases is examined: Ni3Si, Ni31Si12, Ni2Si, NiSi and NiSi2. The composition of these phases is determined by quantitative core-loss EELS. A study of the low loss part of the EELS spectrum shows that both the energy and the shape of the plasmon peak are characteristic for each phase. Examination of the Ni-L edge energy loss near edge structure (ELNES) shows that the ratio and the sum of the L2 and L3 white line intensities are also characteristic for each phase. The sum of the white line intensities is used to determine the trend in electron occupation of the 3d states of the phases. The dependence of the plasmon energy on the electron occupation of the 3d states is demonstrated. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
Oxford |
Editor |
|
| Language |
|
Wos |
000281715400009 |
Publication Date |
2010-05-20 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0022-2720; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
1.692 |
Times cited |
11 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 1.692; 2010 IF: 1.872 |
| Call Number |
UA @ lucian @ c:irua:84879 |
Serial |
329 |
| Permanent link to this record |
| |
|
| |
| Author |
Yang, Z.; Schryvers, D.; Roels, F.; d' Haese, P.C.; de Broe, M.E. |
| Title |
Demonstration of lanthanum in liver cells by energy-dispersive X-ray spectroscopy, electron energy loss spectroscopy and high-resolution transmission electron microscopy |
Type |
A1 Journal article |
| Year |
2006 |
Publication |
Journal of microscopy |
Abbreviated Journal |
J Microsc-Oxford |
| Volume |
223 |
Issue |
2 |
Pages |
133-139 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT); Pathophysiology |
| Abstract |
|
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
Oxford |
Editor |
|
| Language |
|
Wos |
000239702700006 |
Publication Date |
2006-08-10 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0022-2720;1365-2818; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
1.692 |
Times cited |
29 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 1.692; 2006 IF: 1.947 |
| Call Number |
UA @ lucian @ c:irua:59109 |
Serial |
633 |
| Permanent link to this record |
| |
|
| |
| Author |
Cao, S.; Tirry, W.; van den Broek, W.; Schryvers, D. |
| Title |
Optimization of a FIB/SEM slice-and-view study of the 3D distribution of Ni4Ti3 precipitates in NiTi |
Type |
A1 Journal article |
| Year |
2009 |
Publication |
Journal of microscopy |
Abbreviated Journal |
J Microsc-Oxford |
| Volume |
233 |
Issue |
1 |
Pages |
61-68 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab |
| Abstract |
The 3D morphology and distribution of lenticular Ni4Ti3 precipitates in the austenitic B2 matrix of a binary Ni51Ti49 alloy has been investigated by a slice-and-view procedure in a dual-beam focused ion beam/scanning electron microscope system. Due to the weak contrast of the precipitates, proper imaging conditions need to be selected first to allow for semi-automated image treatment. Knowledgeable imaging is further needed to ensure that all variants of the precipitates are observed with equal probability, regardless of sample orientation. Finally, a volume ratio of 10.2% for the Ni4Ti3 precipitates could be calculated, summed over all variants, which yields a net composition of Ni50.27Ti49.73 for the matrix, leading to an increase of 125 degrees for the martensitic start temperature. Also, the expected relative orientation of the different variants of the precipitates could be confirmed. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
Oxford |
Editor |
|
| Language |
|
Wos |
000262511900008 |
Publication Date |
2009-01-15 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0022-2720;1365-2818; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
1.692 |
Times cited |
22 |
Open Access |
|
| Notes |
Multimat Fwo; G0465.05 |
Approved |
Most recent IF: 1.692; 2009 IF: 1.612 |
| Call Number |
UA @ lucian @ c:irua:76026 |
Serial |
2486 |
| Permanent link to this record |
| |
|
| |
| Author |
Potapov, P.L.; Kulkova, S.E.; Schryvers, D. |
| Title |
Study of changes in L32 EELS ionisation edges upon formation of Ni-based intermetallic compounds |
Type |
A1 Journal article |
| Year |
2003 |
Publication |
Journal of microscopy |
Abbreviated Journal |
J Microsc-Oxford |
| Volume |
210 |
Issue |
|
Pages |
102-109 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
|
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
Oxford |
Editor |
|
| Language |
|
Wos |
000182189600014 |
Publication Date |
2005-12-01 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0022-2720;1365-2818; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
1.692 |
Times cited |
11 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 1.692; 2003 IF: 1.779 |
| Call Number |
UA @ lucian @ c:irua:48778 |
Serial |
3328 |
| Permanent link to this record |
| |
|
| |
| Author |
Boulay, E.; Ragoen, C.; Idrissi, H.; Schryvers, D.; Godet, S. |
| Title |
Influence of amorphous phase separation on the crystallization behavior of glass-ceramics in the BaO-TiO2-SiO2 system |
Type |
A1 Journal article |
| Year |
2014 |
Publication |
Journal of non-crystalline solids |
Abbreviated Journal |
J Non-Cryst Solids |
| Volume |
384 |
Issue |
|
Pages |
61-72 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
The possible role of a prior amorphous phase separation on the subsequent crystallization has been the topic of vigorous debates over the last decades and has not yet been clarified, especially regarding the role of the interfaces created by the phase separation. This study proposes to focus on the interplay between a prior amorphous phase separation and the crystallization of fresnoite in the BaO-TiO2-SiO2 system. The crystallization behavior of a non-stoichiometric composition inside the miscibility gap (called APS) is compared with the stoichiometric composition (called FRES) and a non-stoichiometric composition outside the miscibility gap (called NoAPS). The crystallization mechanisms are compared using differential thermal analysis (DTA) by calculating the Avrami parameters and the activation energies as a function of the particle size. The DTA study shows that the two non-stoichiometric compositions exhibit a pronounced surface crystallization behavior whereas FRES undergoes bulk nucleation. This is supported by a multi-scale microstructure characterization. Furthermore, this study demonstrates that the amorphous phase separation and the associated interfaces do not play any significant role in the nucleation step. Moreover, transmission electron microscope (TEM) and local orientation measurements show that the growth of the dendrites is not hindered by the SiO2-rich droplets. The final stage of crystallization of APS is tentatively explained by two composition effects that must be further investigated: the viscosity effect and the formation of a eutectic. (C) 2013 Elsevier B.V. All rights reserved. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
Amsterdam |
Editor |
|
| Language |
|
Wos |
000329422400010 |
Publication Date |
2013-07-24 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0022-3093; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
2.124 |
Times cited |
10 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 2.124; 2014 IF: 1.766 |
| Call Number |
UA @ lucian @ c:irua:114782 |
Serial |
1614 |
| Permanent link to this record |
| |
|
| |
| Author |
Lambrinou, K.; Charalampopoulou, E.; Van der Donck, T.; Delville, R.; Schryvers, D. |
| Title |
Dissolution corrosion of 316L austenitic stainless steels in contact with static liquid lead-bismuth eutectic (LBE) at 500 °C |
Type |
A1 Journal article |
| Year |
2017 |
Publication |
Journal of nuclear materials |
Abbreviated Journal |
J Nucl Mater |
| Volume |
490 |
Issue |
490 |
Pages |
9-27 |
| Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
| Abstract |
This work addresses the dissolution corrosion behaviour of 316L austenitic stainless steels. For this purpose, solution-annealed and cold-deformed 316L steels were simultaneously exposed to oxygen-poor (<10-8 mass%) static liquid lead-bismuth eutectic (LBE) for 253e3282 h at 500 °C. Corrosion was consistently more severe for the cold-drawn steels than the solution-annealed steel, indicating the importance of the steel thermomechanical state. The thickness of the dissolution-affected zone was nonuniform, and sites of locally-enhanced dissolution were occasionally observed. The progress of LBE dissolution attack was promoted by the interplay of certain steel microstructural features (grain boundaries, deformation twin laths, precipitates) with the dissolution corrosion process. The identified dissolution mechanisms were selective leaching leading to steel ferritization, and non-selective leaching; the latter was mainly observed in the solution-annealed steel. The maximum corrosion rate decreased with exposure time and was found to be inversely proportional to the depth of dissolution attack. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
000403132300002 |
Publication Date |
2017-04-10 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0022-3115 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
2.048 |
Times cited |
24 |
Open Access |
OpenAccess |
| Notes |
The authors would like to acknowledge the following 316L stainless steel suppliers: Industeel, ArcelorMittal Group, for the 316LSA plate procured and characterised in the FP6 EUROTRANSDEMETRA project (Contract no. FI6W-CT-2004-516520); OLARRA Aceros Inoxidables, Spain, for the 316LH1 rod; and SIDERO STAAL nv, Belgium, for the 316LH2 rod. K. Lambrinou would like to thank J. Joris for technical support during the launching and follow up of all corrosion tests, J. Lim for the manufacturing and calibration of the oxygen sensors used in these tests, T. Lapauw for the XRD measurements on the pristine steels, and S. Van den Broeck for the FIB sample preparation. Special thanks to S. Gavrilov for fruitful and intense discussions. The authors gratefully acknowledge the funding provided in the framework of the ongoing development of the MYRRHA irradiation facility. The research leading to these results falls within the framework of the European Energy Research Alliance Joint Programme on Nuclear Materials (EERA JPNM). |
Approved |
Most recent IF: 2.048 |
| Call Number |
EMAT @ emat @ c:irua:142644 |
Serial |
4563 |
| Permanent link to this record |
| |
|
| |
| Author |
Cautaerts, N.; Delville, R.; Stergar, E.; Schryvers, D.; Verwerft, M. |
| Title |
Tailoring the Ti-C nanoprecipitate population and microstructure of titanium stabilized austenitic steels |
Type |
A1 Journal article |
| Year |
2018 |
Publication |
Journal of nuclear materials |
Abbreviated Journal |
J Nucl Mater |
| Volume |
507 |
Issue |
507 |
Pages |
177-187 |
| Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
| Abstract |
The present work reports on the microstructural evolution of a new heat of 24% cold worked austenitic DIN 1.4970 (15-15Ti) nuclear cladding steel subjected to ageing heat treatments of varying duration between 500 and 800 degrees C (by steps of 100 degrees C). The primary aim was studying the finely dispersed Ti-C nanoprecipitate population, which are thought to be beneficial for creep and swelling resistance during service. Their size distribution and number density were estimated through dark field imaging and bright field Moire imaging techniques in the transmission electron microscope. Nanoprecipitates formed at and above 600 degrees C, which is a lower temperature than previously reported. The observed nucleation, growth and coarsening behavior of the nanoprecipitates were consistent with simple diffusion arguments. The formation of nanoprecipitates coincided with significant dissociation of dislocations as evidenced by weak beam dark field imaging. Possible mechanisms, including Silcock's stacking fault growth model and Suzuki segregation, are discussed. Recrystallization observed after extended ageing at 800 degrees C caused the redissolution of nanoprecipitates. Large primary Ti(C,N) and (Ti,Mo)C precipitates that occur in the as-received material, and M23C6 precipitates that nucleate on grain boundaries at low temperatures were also characterized by a selective dissolution procedure involving filtration, X-ray diffraction and quantitative Rietveld refinement. The partitioning of key elements between the different phases was derived by combining these findings and was consistent with thermodynamic considerations and the processing history of the steel. (C) 2018 Elsevier B.V. All rights reserved. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
Amsterdam |
Editor |
|
| Language |
|
Wos |
000438019800021 |
Publication Date |
2018-04-30 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0022-3115 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
2.048 |
Times cited |
1 |
Open Access |
Not_Open_Access |
| Notes |
; We would like to acknowledge ENGIE, SCK.CEN, the SCK.CEN academy and the MYRRHA project for the financial support of this work. Special thanks to T. Wangle and P. Dries for their help with filtration and gravimetry. Also thanks to Dr. G. Leinders for the discussions on XRD and Rietveld refinement. Thanks to E. Charalampopoulou and A. Youssef for assisting with the dissolution experiments. ; |
Approved |
Most recent IF: 2.048 |
| Call Number |
UA @ lucian @ c:irua:152382 |
Serial |
5043 |
| Permanent link to this record |
| |
|
| |
| Author |
Penders, A.G.; Konstantinovic, M.J.; Yang, T.; Bosch, R.-w.; Schryvers, D.; Somville, F. |
| Title |
Microstructural investigation of IASCC crack tips extracted from thimble tube O-ring specimens |
Type |
A1 Journal article |
| Year |
2022 |
Publication |
Journal of nuclear materials |
Abbreviated Journal |
J Nucl Mater |
| Volume |
565 |
Issue |
|
Pages |
153727-16 |
| Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
| Abstract |
The microstructural features of intergranular irradiation-assisted stress corrosion crack tips from a redeemed neutron-irradiated flux thimble tube (60 dpa) have been investigated using focused-ion beam analysis and (scanning) transmission electron microscopy. The current work presents a close examination of the deformation field and oxide assembly associated with intergranular cracking, in addition to the analysis of radiation-induced segregation at leading grain boundaries. Evidence of stress induced martensitic transformation extending from the crack tips is presented. Intergranular crack arrest is demonstrated on the account of the external tensile stress orientation, and as a consequence of MnS inclusion particles segregating close to the fractured grain boundary. Exclusive observations of grain boundary oxidation prior to the cracking are presented, which is in full-agreement with the internal oxidation model.(c) 2022 Elsevier B.V. All rights reserved. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
000799256300004 |
Publication Date |
2022-04-11 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0022-3115 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.1 |
Times cited |
|
Open Access |
OpenAccess |
| Notes |
|
Approved |
Most recent IF: 3.1 |
| Call Number |
UA @ admin @ c:irua:188609 |
Serial |
7086 |
| Permanent link to this record |
| |
|
| |
| Author |
Penders, A.G.; Konstantinović, M.J.; Van Renterghem, W.; Bosch, R.-W.; Schryvers, D.; Somville, F. |
| Title |
Characterization of IASCC crack tips extracted from neutron-irradiated flux thimble tube specimens in view of a probabilistic fracture model |
Type |
A1 Journal article |
| Year |
2022 |
Publication |
Journal of nuclear materials |
Abbreviated Journal |
J Nucl Mater |
| Volume |
571 |
Issue |
|
Pages |
154015-154016 |
| Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
| Abstract |
This study reports the properties of irradiation assisted stress corrosion crack tips extracted by means of focused-ion beam from 60 to 80 dpa neutron-irradiated O-ring specimens tested under straining conditions under a pressurized-water reactor environment. Various crack tip morphologies and surrounding deformation features were analyzed as a function of applied stress, surface oxidation state and loading form – constant versus cyclic. All investigated cracks exhibit grain boundary oxidation in front of the crack tip, with the extent of oxidation being proportional to applied stress. These findings clearly demonstrate that, under the subcritical crack propagation regime, the grain boundary oxide grows faster than the crack. On the other hand, crack tips appertaining to specimens with removed oxide layer at the outer surface show comparatively less oxidation at the crack tip, which could indicate towards crack initiation from regions that exemplify lower stress, such as the O-ring inner surface. Cyclic loading is found to have a more pronounced effect on the crack tip microstructure, demonstrating increased deformation twinning and -martensitic transformation, which signifies towards an increased susceptibility to intergranular failure. Still, the extent of crack tip grain boundary oxidation in this case agrees well with expected values for maximum stress applied during cyclic loading. All results are interpreted based on the probabilistic subcritical crack propagation mechanism and provide strong support to a stress-driven internal oxidation model. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
000872389200009 |
Publication Date |
2022-09-06 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0022-3115 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.1 |
Times cited |
|
Open Access |
OpenAccess |
| Notes |
|
Approved |
Most recent IF: 3.1 |
| Call Number |
UA @ admin @ c:irua:190375 |
Serial |
7135 |
| Permanent link to this record |
| |
|
| |
| Author |
Schryvers, D.; de Saegher, B.; van Landuyt, J. |
| Title |
Electron microscopy and diffraction study of the composition dependency of the 3R microtwinned martensite in Ni-Al |
Type |
A1 Journal article |
| Year |
1991 |
Publication |
Materials research bulletin |
Abbreviated Journal |
Mater Res Bull |
| Volume |
26 |
Issue |
|
Pages |
57-66 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
|
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
New York, N.Y. |
Editor |
|
| Language |
|
Wos |
A1991EU98500007 |
Publication Date |
0000-00-00 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0025-5408 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
2.288 |
Times cited |
11 |
Open Access |
|
| Notes |
|
Approved |
no |
| Call Number |
UA @ lucian @ c:irua:48348 |
Serial |
943 |
| Permanent link to this record |
| |
|
| |
| Author |
Schryvers, D.; Van Tendeloo, G.; van Landuyt, J.; Amelinckx, S. |
| Title |
Some examples of electron microscopy studies of microstructures and phase transitions in solids |
Type |
A1 Journal article |
| Year |
1995 |
Publication |
Meccanica |
Abbreviated Journal |
Meccanica |
| Volume |
30 |
Issue |
|
Pages |
433-438 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
|
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
Milano |
Editor |
|
| Language |
|
Wos |
A1995TD08800003 |
Publication Date |
2005-04-21 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0025-6455;1572-9648; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
1.949 |
Times cited |
1 |
Open Access |
|
| Notes |
|
Approved |
CHEMISTRY, PHYSICAL 77/144 Q3 # MATHEMATICS, INTERDISCIPLINARY 19/101 Q1 # PHYSICS, ATOMIC, MOLECULAR & CHEMICAL 17/35 Q2 # |
| Call Number |
UA @ lucian @ c:irua:13170 |
Serial |
3054 |
| Permanent link to this record |
| |
|
| |
| Author |
Tian, H.; Schryvers, D.; Claeys, P. |
| Title |
Nanodiamonds do not provide unique evidence for a Younger Dryas impact |
Type |
A1 Journal article |
| Year |
2011 |
Publication |
Proceedings of the National Academy of Sciences of the United States of America |
Abbreviated Journal |
P Natl Acad Sci Usa |
| Volume |
108 |
Issue |
1 |
Pages |
40-44 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
Microstructural, δ13C isotope and C/N ratio investigations were conducted on excavated material from the black Younger Dryas boundary in Lommel, Belgium, aiming for a characterisation of the carbon content and structures. Cubic diamond nanoparticles are found in large numbers. The larger ones with diameters around or above 10 nm often exhibit single or multiple twins. The smaller ones around 5 nm in diameter are mostly defect-free. Also larger flake-like particles, around 100 nm in lateral dimension, with a cubic diamond structure are observed as well as large carbon onion structures. The combination of these characteristics does not yield unique evidence for an exogenic impact related to the investigated layer. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
Washington, D.C. |
Editor |
|
| Language |
|
Wos |
000285915000012 |
Publication Date |
2010-12-21 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0027-8424;1091-6490; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
9.661 |
Times cited |
32 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 9.661; 2011 IF: 9.681 |
| Call Number |
UA @ lucian @ c:irua:88733 |
Serial |
2254 |
| Permanent link to this record |
