|
Records |
Links |
|
Author |
Pandey, T.; Covaci, L.; Peeters, F.M. |
|
|
Title |
Tuning flexoelectricty and electronic properties of zig-zag graphene nanoribbons by functionalization |
Type |
A1 Journal article |
|
Year |
2021 |
Publication |
Carbon |
Abbreviated Journal |
Carbon |
|
|
Volume |
171 |
Issue |
|
Pages |
551-559 |
|
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT); Condensed Matter Theory (CMT) |
|
|
Abstract |
The flexoelectric and electronic properties of zig-zag graphene nanoribbons are explored under mechanical bending using state of the art first principles calculations. A linear dependence of the bending induced out of plane polarization on the applied strain gradient is found. The inferior flexoelectric properties of graphene nanoribbons can be improved by more than two orders of magnitude by hydrogen and fluorine functionalization (CH and CF nanoribbons). A large out of plane flexoelectric effect is predicted for CF nanoribbons. The origin of this enhancement lies in the electro-negativity difference between carbon and fluorine atoms, which breaks the out of plane charge symmetry even for a small strain gradient. The flexoelectric effect can be further improved by co-functionalization with hydrogen and fluorine (CHF Janus-type nanoribbon), where a spontaneous out of plane dipole moment is formed even for flat nanoribbons. We also find that bending can control the charge localization of valence band maxima and therefore enables the tuning of the hole effective masses and band gaps. These results present an important advance towards the understanding of flexoelectric and electronic properties of hydrogen and fluorine functionalized graphene nanoribbons, which can have important implications for flexible electronic applications. (C) 2020 Elsevier Ltd. All rights reserved. |
|
|
Address |
|
|
|
Corporate Author |
|
Thesis |
|
|
|
Publisher |
|
Place of Publication |
|
Editor |
|
|
|
Language |
|
Wos |
000598371500058 |
Publication Date |
2020-09-17 |
|
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
|
ISSN |
0008-6223 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
|
Impact Factor |
6.337 |
Times cited |
15 |
Open Access |
OpenAccess |
|
|
Notes |
; The computational resources and services used for the first-principles calculations in this work were provided by the VSC (Flemish Supercomputer Center), funded by the Flemish Science Foundation (FWO-VI). T. P. is supported by a postdoctoral research fellowship from BOF-UAntwerpen. ; |
Approved |
Most recent IF: 6.337 |
|
|
Call Number |
UA @ admin @ c:irua:175014 |
Serial |
6700 |
|
Permanent link to this record |
|
|
|
|
Author |
Veronesi, S.; Pfusterschmied, G.; Fabbri, F.; Leitgeb, M.; Arif, O.; Esteban, D.A.; Bals, S.; Schmid, U.; Heun, S. |
|
|
Title |
3D arrangement of epitaxial graphene conformally grown on porousified crystalline SiC |
Type |
A1 Journal article |
|
Year |
2022 |
Publication |
Carbon |
Abbreviated Journal |
Carbon |
|
|
Volume |
189 |
Issue |
|
Pages |
210-218 |
|
|
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
|
|
Abstract |
|
|
|
Address |
|
|
|
Corporate Author |
|
Thesis |
|
|
|
Publisher |
|
Place of Publication |
|
Editor |
|
|
|
Language |
|
Wos |
000760358800008 |
Publication Date |
2021-12-17 |
|
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
|
ISSN |
0008-6223 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
|
Impact Factor |
10.9 |
Times cited |
3 |
Open Access |
OpenAccess |
|
|
Notes |
Horizon 2020; European Commission; Horizon 2020 Framework Programme; European Research Council, 128 731 019 ; European Research Council, REALNANO 815 128 ; sygmaSB |
Approved |
Most recent IF: 10.9 |
|
|
Call Number |
EMAT @ emat @c:irua:186583 |
Serial |
6952 |
|
Permanent link to this record |
|
|
|
|
Author |
Cao, M.; Xiong, D.-B.; Tan, Z.; Ji, G.; Amin-Ahmadi, B.; Guo, Q.; Fan, G.; Guo, C.; Li, Z.; Zhang, D. |
|
|
Title |
Aligning graphene in bulk copper : nacre-inspired nanolaminated architecture coupled with in-situ processing for enhanced mechanical properties and high electrical conductivity |
Type |
A1 Journal article |
|
Year |
2017 |
Publication |
Carbon |
Abbreviated Journal |
|
|
|
Volume |
117 |
Issue |
|
Pages |
65-74 |
|
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
|
Abstract |
Methods used to strengthen metals generally also cause a pronounced decrease in ductility and electrical conductivity. In this work a bioinspired strategy is applied to surmount the dilemma. By assembling copper submicron flakes cladded with in-situ grown graphene, graphene/copper matrix composites with a nanolaminated architecture inspired by a natural nacre have been prepared. Owing to a combined effect-from the bioinspired nanolaminated architecture and improved interfacial bonding, a synergy has been achieved between mechanical strength and ductility as well as electrical conductivity in the graphene/copper matrix composites. With a low volume fraction of only 2.5% of graphene, the composite shows a yield strength and elastic modulus similar to 177% and similar to 25% higher than that of unreinforced copper matrix, respectively, while retains ductility and electrical conductivity comparable to that of pure copper. The bioinspired nanolaminated architecture enhances the efficiencies of two-dimensional (2D) graphene in mechanical strengthening and electrical conducting by aligning graphene to maximize performance for required loading and carrier transporting conditions, and toughens the composites by crack deflection. Meanwhile, in-situ growth of graphene is beneficial for improving interfacial bonding and structural quality of graphene. The strategy sheds light on the development of composites with good combined structural and functional properties. (C) 2017 Elsevier Ltd. All rights reserved. |
|
|
Address |
|
|
|
Corporate Author |
|
Thesis |
|
|
|
Publisher |
|
Place of Publication |
|
Editor |
|
|
|
Language |
|
Wos |
000400212100008 |
Publication Date |
2017-02-27 |
|
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
|
ISSN |
0008-6223 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
|
Impact Factor |
|
Times cited |
|
Open Access |
|
|
|
Notes |
|
Approved |
no |
|
|
Call Number |
UA @ admin @ c:irua:152635 |
Serial |
7435 |
|
Permanent link to this record |
|
|
|
|
Author |
Pierard, N.; Fonseca, A.; Colomer, J.-F.; Bossuot, C.; Benoit, J.-M.; Van Tendeloo, G.; Pirard, J.-P.; Nagy, J.B. |
|
|
Title |
Ball milling effect on the structure of single-wall carbon nanotubes |
Type |
A1 Journal article |
|
Year |
2004 |
Publication |
Carbon |
Abbreviated Journal |
Carbon |
|
|
Volume |
42 |
Issue |
8/9 |
Pages |
1691-1697 |
|
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
|
Abstract |
|
|
|
Address |
|
|
|
Corporate Author |
|
Thesis |
|
|
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
|
|
Language |
|
Wos |
000221948000035 |
Publication Date |
2004-04-09 |
|
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
|
ISSN |
0008-6223; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
|
Impact Factor |
6.337 |
Times cited |
133 |
Open Access |
|
|
|
Notes |
Pai/Iuap P5/01 |
Approved |
Most recent IF: 6.337; 2004 IF: 3.331 |
|
|
Call Number |
UA @ lucian @ c:irua:54866 |
Serial |
213 |
|
Permanent link to this record |
|
|
|
|
Author |
Corthals, S.; van Noyen, J.; Geboers, J.; Vosch, T.; Liang, D.; Ke, X.; Hofkens, J.; Van Tendeloo, G.; Jacobs, P.; Sels, B. |
|
|
Title |
The beneficial effect of CO2 in the low temperature synthesis of high quality carbon nanofibers and thin multiwalled carbon nanotubes from CH_{4} over Ni catalysts |
Type |
A1 Journal article |
|
Year |
2012 |
Publication |
Carbon |
Abbreviated Journal |
Carbon |
|
|
Volume |
50 |
Issue |
2 |
Pages |
372-384 |
|
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
|
Abstract |
A low temperature chemical vapor deposition method is described for converting CH4 into high-quality carbon nanofibers (CNFs) using a Ni catalyst supported on either spinel or perovskite oxides in the presence of CO2. The addition of CO2 has a significant influence on CNF purity and stability, while the CNF diameter distribution is significantly narrowed. Ultimately, the addition of CO2 changes the CNF structure from fishbone fibers to thin multiwalled carbon nanotubes. A new in situ cooling principle taking into account dry reforming chemistry and thermodynamics is introduced to account for the structural effects of CO2. |
|
|
Address |
|
|
|
Corporate Author |
|
Thesis |
|
|
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
|
|
Language |
|
Wos |
000297397700004 |
Publication Date |
2011-09-01 |
|
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
|
ISSN |
0008-6223; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
|
Impact Factor |
6.337 |
Times cited |
26 |
Open Access |
|
|
|
Notes |
Iwt; Iap |
Approved |
Most recent IF: 6.337; 2012 IF: 5.868 |
|
|
Call Number |
UA @ lucian @ c:irua:93626 |
Serial |
228 |
|
Permanent link to this record |
|
|
|
|
Author |
Lu, Y.-G.; Turner, S.; Ekimov, E.A.; Verbeeck, J.; Van Tendeloo, G. |
|
|
Title |
Boron-rich inclusions and boron distribution in HPHT polycrystalline superconducting diamond |
Type |
A1 Journal article |
|
Year |
2015 |
Publication |
Carbon |
Abbreviated Journal |
Carbon |
|
|
Volume |
86 |
Issue |
86 |
Pages |
156-162 |
|
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
|
Abstract |
Polycrystalline boron-doped superconducting diamond, synthesized at high pressure and high temperature (HPHT) via a reaction of a single piece of crystalline boron with monolithic graphite, has been investigated by analytical transmission electron microscopy. The local boron distribution and boron environment have been studied by a combination of (scanning) transmission electron microscopy ((S)TEM) and spatially resolved electron energy-loss spectroscopy (EELS). High resolution TEM imaging and EELS elemental mapping have established, for the first time, the presence of largely crystalline diamond-diamond grain boundaries within the material and have evidenced the presence of substitutional boron dopants within individual diamond grains. Confirmation of the presence of substitutional B dopants has been obtained through comparison of acquired boron K-edge EELS fine structures with known references. This confirmation is important to understand the origin of superconductivity in polycrystalline B-doped diamond. In addition to the substitutional boron doping, boron-rich inclusions and triple-points, both amorphous and crystalline, with chemical compositions close to boron carbide B4C, are evidenced. (C) 2015 Elsevier Ltd. All rights reserved. |
|
|
Address |
|
|
|
Corporate Author |
|
Thesis |
|
|
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
|
|
Language |
|
Wos |
000352922700019 |
Publication Date |
2015-01-22 |
|
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
|
ISSN |
0008-6223; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
|
Impact Factor |
6.337 |
Times cited |
20 |
Open Access |
|
|
|
Notes |
FWO; 246791 COUNTATOMS; 278510 VORTEX; Hercules ECASJO_; |
Approved |
Most recent IF: 6.337; 2015 IF: 6.196 |
|
|
Call Number |
c:irua:125994UA @ admin @ c:irua:125994 |
Serial |
250 |
|
Permanent link to this record |
|
|
|
|
Author |
Tikhomirov, A.S.; Sorokina, N.E.; Shornikova, O.N.; Morozov, V.A.; Van Tendeloo, G.; Avdeev, V.V. |
|
|
Title |
The chemical vapor infiltration of exfoliated graphite to produce carbon/carbon composites |
Type |
A1 Journal article |
|
Year |
2011 |
Publication |
Carbon |
Abbreviated Journal |
Carbon |
|
|
Volume |
49 |
Issue |
1 |
Pages |
147-153 |
|
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
|
Abstract |
Chemical vapor infiltration was used for the production of carbon/carbon composites based on exfoliated graphite and pyrolytic carbon Two different exfoliated graphites compacted to densities of 0 05-0 4 g/cm(3) were used as a preform The influence of the synthesis conditions (temperature, pressure, time etc) on the degree of infiltration, the pyrolytic carbon morphology and the C/C composite characteristics was examined using Raman spectroscopy, scanning electron microscopy and low-temperature nitrogen adsorption (C) 2010 Elsevier Ltd All rights reserved |
|
|
Address |
|
|
|
Corporate Author |
|
Thesis |
|
|
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
|
|
Language |
|
Wos |
000284977500021 |
Publication Date |
2010-09-08 |
|
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
|
ISSN |
0008-6223; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
|
Impact Factor |
6.337 |
Times cited |
7 |
Open Access |
|
|
|
Notes |
Iap |
Approved |
Most recent IF: 6.337; 2011 IF: 5.378 |
|
|
Call Number |
UA @ lucian @ c:irua:99185 |
Serial |
354 |
|
Permanent link to this record |
|
|
|
|
Author |
Titantah, J.T.; Lamoen, D.; Schowalter, M.; Rosenauer, A. |
|
|
Title |
Density-functional theory calculations of the electron energy-loss near-edge structure of Li-intercalated graphite |
Type |
A1 Journal article |
|
Year |
2009 |
Publication |
Carbon |
Abbreviated Journal |
Carbon |
|
|
Volume |
47 |
Issue |
10 |
Pages |
2501-2510 |
|
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
|
Abstract |
We have studied the structural and electronic properties of lithium-intercalated graphite (LIG) for various Li content. Atomic relaxation shows that Li above the center of the carbon hexagon in a AAAA stacked graphite is the only stable Li configuration in stage 1 intercalated graphite. Lithium and Carbon 1s energy-loss near-edge structure (ELNES) calculations are performed on the Li-intercalated graphite using the core-excited density-functional theory formulation. Several features of the Li 1s ELNES are correlated with reported experimental features. The ELNES spectra of Li is found to be electron beam orientation sensitive and this property is used to assign the origin of the various Li 1s ELNES features. Information about core-hole screening by the valence electrons and charge transfer in the LIG systems is obtained from the C 1s ELNES and valence charge density difference calculations, respectively. |
|
|
Address |
|
|
|
Corporate Author |
|
Thesis |
|
|
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
|
|
Language |
|
Wos |
000268429000025 |
Publication Date |
2009-05-11 |
|
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
|
ISSN |
0008-6223; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
|
Impact Factor |
6.337 |
Times cited |
12 |
Open Access |
|
|
|
Notes |
Fwo G.0425.05; Esteem 026019 |
Approved |
Most recent IF: 6.337; 2009 IF: 4.504 |
|
|
Call Number |
UA @ lucian @ c:irua:77973 |
Serial |
638 |
|
Permanent link to this record |
|
|
|
|
Author |
He, Z.; Ke, X.; Bals, S.; Van Tendeloo, G. |
|
|
Title |
Direct evidence for the existence of multi-walled carbon nanotubes with hexagonal cross-sections |
Type |
A1 Journal article |
|
Year |
2012 |
Publication |
Carbon |
Abbreviated Journal |
Carbon |
|
|
Volume |
50 |
Issue |
7 |
Pages |
2524-2529 |
|
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
|
Abstract |
Carbon nanotubes (CNTs) with a polygonal cross-section have been paid increasing attention since their three-dimensional structure is related to specific physical properties, which are found to be different in comparison to CNTs with a circular cross-section. Here, we report the existence of novel multi-walled CNTs yielding walls with a rounded-hexagonal configuration. This structure was directly confirmed for the first time by both cross-sectional transmission electron microscopy and electron tomography. The morphology of the Fe catalytic particle also exhibits hexagonal characteristics, and is proposed as the origin of the formation of the rounded-hexagonal walls of the CNT. This observation is of great importance with respect to the design of polygonal (such as pentagonal or hexagonal) cross-sectional CNTs. By controlling the morphology of the catalytic nanoparticles it will be possible to grow CNTs with desired electronic and mechanical properties. |
|
|
Address |
|
|
|
Corporate Author |
|
Thesis |
|
|
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
|
|
Language |
|
Wos |
000303038400015 |
Publication Date |
2012-02-06 |
|
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
|
ISSN |
0008-6223; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
|
Impact Factor |
6.337 |
Times cited |
8 |
Open Access |
|
|
|
Notes |
Fwo |
Approved |
Most recent IF: 6.337; 2012 IF: 5.868 |
|
|
Call Number |
UA @ lucian @ c:irua:96956 |
Serial |
711 |
|
Permanent link to this record |
|
|
|
|
Author |
Afanasov, I.M.; Shornikova, O.N.; Avdeev, V.V.; Lebedev, O.I.; Van Tendeloo, G.; Matveev, A.T. |
|
|
Title |
Expanded graphite as a support for Ni/carbon composites |
Type |
A1 Journal article |
|
Year |
2009 |
Publication |
Carbon |
Abbreviated Journal |
Carbon |
|
|
Volume |
47 |
Issue |
2 |
Pages |
513-518 |
|
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
|
Abstract |
Expanded graphite decorated with nickel oxide particles (EGNiO) has been synthesized through electrochemical oxidation of natural graphite in an aqueous nickel nitrate solution followed by a heat treatment. EGNiO was used to prepare nickel/carbon composites using two techniques: (a) hydrogen reduction of nickel oxide particles loaded on the expanded graphite surface and (b) pyrolysis of coal tar pitch-impregnated EGNiO blocks. The EGNiO as well as the nickel/carbon composites have been characterized by X-ray diffraction, scanning and transmission electron microscopy, energy dispersive X-ray spectroscopy and selected area electron diffraction. |
|
|
Address |
|
|
|
Corporate Author |
|
Thesis |
|
|
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
|
|
Language |
|
Wos |
000262558300018 |
Publication Date |
2008-11-11 |
|
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
|
ISSN |
0008-6223; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
|
Impact Factor |
6.337 |
Times cited |
45 |
Open Access |
|
|
|
Notes |
Iap-Vi |
Approved |
Most recent IF: 6.337; 2009 IF: 4.504 |
|
|
Call Number |
UA @ lucian @ c:irua:76033 |
Serial |
1132 |
|
Permanent link to this record |
|
|
|
|
Author |
Afanasov, I.M.; Shornikova, O.N.; Kirilenko, D.A.; Vlasov, I.I.; Zhang, L.; Verbeeck, J.; Avdeev, V.V.; Van Tendeloo, G. |
|
|
Title |
Graphite structural transformations during intercalation by HNO3 and exfoliation |
Type |
L1 Letter to the editor |
|
Year |
2010 |
Publication |
Carbon |
Abbreviated Journal |
Carbon |
|
|
Volume |
48 |
Issue |
6 |
Pages |
1862-1865 |
|
|
Keywords |
L1 Letter to the editor; Electron microscopy for materials research (EMAT) |
|
|
Abstract |
Expandable graphite of two types was synthesized by (1) hydrolysis of graphite nitrate of II stage and (2) anodic polarization of graphite in 60% HNO3. Exfoliated graphite samples were produced by thermal shock of expandable graphite samples in air at 900 °C. A comparative study of microstructural distinctions of both expandable and exfoliated graphite samples was carried out using X-ray diffraction, Raman spectroscopy, electron energy loss spectroscopy and high resolution transmission electron microscopy. |
|
|
Address |
|
|
|
Corporate Author |
|
Thesis |
|
|
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
|
|
Language |
|
Wos |
000276132800021 |
Publication Date |
2010-02-02 |
|
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
|
ISSN |
0008-6223; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
|
Impact Factor |
6.337 |
Times cited |
43 |
Open Access |
|
|
|
Notes |
|
Approved |
Most recent IF: 6.337; 2010 IF: 4.896 |
|
|
Call Number |
UA @ lucian @ c:irua:82315UA @ admin @ c:irua:82315 |
Serial |
1379 |
|
Permanent link to this record |
|
|
|
|
Author |
Zhang, X.F.; Zhang, X.B.; Van Tendeloo, G.; Meijer, G. |
|
|
Title |
“Harmless” carbon tubes around “dangerous” asbestos fibres |
Type |
A1 Journal article |
|
Year |
1994 |
Publication |
Carbon |
Abbreviated Journal |
Carbon |
|
|
Volume |
32 |
Issue |
|
Pages |
363-366 |
|
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
|
Abstract |
|
|
|
Address |
|
|
|
Corporate Author |
|
Thesis |
|
|
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
|
|
Language |
|
Wos |
A1994NC96800026 |
Publication Date |
2003-06-20 |
|
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
|
ISSN |
0008-6223; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
|
Impact Factor |
6.196 |
Times cited |
2 |
Open Access |
|
|
|
Notes |
|
Approved |
MATERIALS SCIENCE, MULTIDISCIPLINARY 135/271 Q2 # PHYSICS, APPLIED 70/145 Q2 # PHYSICS, CONDENSED MATTER 40/67 Q3 # |
|
|
Call Number |
UA @ lucian @ c:irua:10029 |
Serial |
1411 |
|
Permanent link to this record |
|
|
|
|
Author |
Felten, A.; Bittencourt, C.; Colomer, J.-F.; Van Tendeloo, G.; Pireaux, J.-J. |
|
|
Title |
Nucleation of metal clusters on plasma treated multi wall carbon nanotubes |
Type |
A1 Journal article |
|
Year |
2007 |
Publication |
Carbon |
Abbreviated Journal |
Carbon |
|
|
Volume |
45 |
Issue |
1 |
Pages |
110-116 |
|
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
|
Abstract |
|
|
|
Address |
|
|
|
Corporate Author |
|
Thesis |
|
|
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
|
|
Language |
|
Wos |
000243583300017 |
Publication Date |
2006-09-27 |
|
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
|
ISSN |
0008-6223; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
|
Impact Factor |
6.337 |
Times cited |
40 |
Open Access |
|
|
|
Notes |
|
Approved |
Most recent IF: 6.337; 2007 IF: 4.260 |
|
|
Call Number |
UA @ lucian @ c:irua:63033 |
Serial |
2389 |
|
Permanent link to this record |
|
|
|
|
Author |
Felten, A.; Ghijsen, J.; Pireaux, J.-J.; Whelan, C.M.; Liang, D.; Van Tendeloo, G.; Bittencourt, C. |
|
|
Title |
Photoemission study of CF4 rf-plasma treated multi-wall carbon nanotubes |
Type |
A1 Journal article |
|
Year |
2008 |
Publication |
Carbon |
Abbreviated Journal |
Carbon |
|
|
Volume |
46 |
Issue |
10 |
Pages |
1271-1275 |
|
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
|
Abstract |
Multi-wall carbon nanotubes (MWCNTs) were exposed to a CF4 rf-plasma. X-ray photoelectron spectroscopy analysis shows that the treatment effectively grafts fluorine atoms onto the MWCNTs. The fluorine atomic concentration and the nature of the CF bond (semi-ionic or covalent) can be tuned by varying the exposure time. Ultraviolet photoelectron spectroscopy analysis confirms that the valence electronic states are altered by the grafting of fluorine atoms. Characterization with high-resolution transmission electron microscopy reveals that while the plasma treatment does not induce significant etching impact on the CNT-surface, it does increase the number of active sites for gold cluster formation. |
|
|
Address |
|
|
|
Corporate Author |
|
Thesis |
|
|
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
|
|
Language |
|
Wos |
000258987500001 |
Publication Date |
2008-05-16 |
|
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
|
ISSN |
0008-6223; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
|
Impact Factor |
6.337 |
Times cited |
21 |
Open Access |
|
|
|
Notes |
|
Approved |
Most recent IF: 6.337; 2008 IF: 4.373 |
|
|
Call Number |
UA @ lucian @ c:irua:76481 |
Serial |
2612 |
|
Permanent link to this record |
|
|
|
|
Author |
Afanasov, I.M.; Morozov, V.A.; Kepman, A.V.; Ionov, S.G.; Seleznev, A.N.; Van Tendeloo, G.; Audeev, V.V. |
|
|
Title |
Preparation, electrical and thermal properties of new exfoliated graphite-based composites |
Type |
A1 Journal article |
|
Year |
2009 |
Publication |
Carbon |
Abbreviated Journal |
Carbon |
|
|
Volume |
47 |
Issue |
1 |
Pages |
263-270 |
|
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
|
Abstract |
Exfoliated graphite samples (EG) with different bulk densities were prepared by the exfoliation of expandable graphite under a thermal shock regime. As a conductive filler, EG has been incorporated successfully into the coal tar pitch matrix by mechanical mixing. The conducting behavior of the composite was interpreted based on the percolation theory. The percolation threshold of the EG/pitch conducting composites at room temperature was as low as 1.5 wt% and did not depend on the bulk density of the EG used. By means of thermogravimetry the improvement of thermal stability of the composites in comparison with pure pitches was detected. The phenomenon was ascribed to heat shielding effect of the EG particles evidenced by matrix-assisted laser desorption/ionization mass spectrometry. |
|
|
Address |
|
|
|
Corporate Author |
|
Thesis |
|
|
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
|
|
Language |
|
Wos |
000262143500032 |
Publication Date |
2008-10-14 |
|
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
|
ISSN |
0008-6223; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
|
Impact Factor |
6.337 |
Times cited |
42 |
Open Access |
|
|
|
Notes |
Iap-Vi |
Approved |
Most recent IF: 6.337; 2009 IF: 4.504 |
|
|
Call Number |
UA @ lucian @ c:irua:75767 |
Serial |
2701 |
|
Permanent link to this record |
|
|
|
|
Author |
Suarez-Martinez, I.; Bittencourt, C.; Ke, X.; Felten, A.; Pireaux, J.J.; Ghijsen, J.; Drube, W.; Van Tendeloo, G.; Ewels, C.P. |
|
|
Title |
Probing the interaction between gold nanoparticles and oxygen functionalized carbon nanotubes |
Type |
A1 Journal article |
|
Year |
2009 |
Publication |
Carbon |
Abbreviated Journal |
Carbon |
|
|
Volume |
47 |
Issue |
6 |
Pages |
1549-1554 |
|
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
|
Abstract |
The interaction between evaporated gold and pristine or oxygen plasma treated multi-walled carbon nanotubes (MWCNTs) is investigated. Experimental and theoretical results indicate that gold nucleation occurs at defect sites, whether initially present or introduced by oxygen plasma treatment. Uniform gold cluster dispersion is observed on plasma treated carbon nanotubes (CNTs) and associated with the presence of uniformly dispersed oxidized vacancy centres on the CNT surface. |
|
|
Address |
|
|
|
Corporate Author |
|
Thesis |
|
|
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
|
|
Language |
|
Wos |
000265518700018 |
Publication Date |
2009-02-11 |
|
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
|
ISSN |
0008-6223; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
|
Impact Factor |
6.337 |
Times cited |
38 |
Open Access |
|
|
|
Notes |
Pai |
Approved |
Most recent IF: 6.337; 2009 IF: 4.504 |
|
|
Call Number |
UA @ lucian @ c:irua:77267 |
Serial |
2717 |
|
Permanent link to this record |
|
|
|
|
Author |
Van Tendeloo, G.; Bernaerts, D.; Amelinckx, S. |
|
|
Title |
Reduced dimensionality in different forms of carbon |
Type |
A1 Journal article |
|
Year |
1998 |
Publication |
Carbon |
Abbreviated Journal |
Carbon |
|
|
Volume |
36 |
Issue |
5/6 |
Pages |
487-493 |
|
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
|
Abstract |
|
|
|
Address |
|
|
|
Corporate Author |
|
Thesis |
|
|
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
|
|
Language |
|
Wos |
000074824600003 |
Publication Date |
2002-07-25 |
|
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
|
ISSN |
0008-6223; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
|
Impact Factor |
6.337 |
Times cited |
4 |
Open Access |
|
|
|
Notes |
|
Approved |
Most recent IF: 6.337; 1998 IF: 1.293 |
|
|
Call Number |
UA @ lucian @ c:irua:25662 |
Serial |
2851 |
|
Permanent link to this record |
|
|
|
|
Author |
Cabana, L.; Ke, X.; Kepić, D.; Oro-Solé, J.; Tobías-Rossell, E.; Van Tendeloo, G.; Tobias, G. |
|
|
Title |
The role of steam treatment on the structure, purity and length distribution of multi-walled carbon nanotubes |
Type |
A1 Journal article |
|
Year |
2015 |
Publication |
Carbon |
Abbreviated Journal |
Carbon |
|
|
Volume |
93 |
Issue |
93 |
Pages |
1059-1067 |
|
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
|
Abstract |
Purification and shortening of carbon nanotubes have attracted a great deal of attention to increase the biocompatibility and performance of the material in several applications. Steam treatment has been employed to afford both purification and shortening of multi-walled carbon nanotubes (MWCNTs). Steam removes the amorphous carbon and the graphitic particles that sheath catalytic nanoparticles, facilitating their removal by a subsequent acidic wash. The amount of metal impurities can be reduced in this manner below 0.01 wt.%. The length distribution of MWCNTs after different steam treatment times (from 1 h to 15 h) was assessed by box plot analysis of the electron microscopy data. Samples with a median length of 0.57 μm have been prepared with the reported methodology while preserving the integrity of the tubular wall structure. |
|
|
Address |
|
|
|
Corporate Author |
|
Thesis |
|
|
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
|
|
Language |
|
Wos |
000360292100108 |
Publication Date |
2015-06-23 |
|
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
|
ISSN |
0008-6223; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
|
Impact Factor |
6.337 |
Times cited |
17 |
Open Access |
|
|
|
Notes |
312483 Esteem2; 290023 Raddel; esteem2_ta |
Approved |
Most recent IF: 6.337; 2015 IF: 6.196 |
|
|
Call Number |
c:irua:127691 c:irua:127691 |
Serial |
2921 |
|
Permanent link to this record |
|
|
|
|
Author |
Li, Y.; Zhang, X.B.; Tao, X.Y.; Xu, J.M.; Chen, F.; Shen, L.H.; Yang, X.F.; Liu, F.; Van Tendeloo, G.; Geise, H.J. |
|
|
Title |
Single phase MgMoO4 as catalyst for the synthesis of bundled multi-wall carbon nanotubes by CVD |
Type |
L1 Letter to the editor |
|
Year |
2005 |
Publication |
Carbon |
Abbreviated Journal |
Carbon |
|
|
Volume |
43 |
Issue |
6 |
Pages |
1325-1328 |
|
|
Keywords |
L1 Letter to the editor; Electron microscopy for materials research (EMAT) |
|
|
Abstract |
|
|
|
Address |
|
|
|
Corporate Author |
|
Thesis |
|
|
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
|
|
Language |
|
Wos |
000228676400026 |
Publication Date |
2005-03-11 |
|
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
|
ISSN |
0008-6223; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
|
Impact Factor |
6.337 |
Times cited |
23 |
Open Access |
|
|
|
Notes |
Iap V-1 |
Approved |
Most recent IF: 6.337; 2005 IF: 3.419 |
|
|
Call Number |
UA @ lucian @ c:irua:59055 |
Serial |
3026 |
|
Permanent link to this record |
|
|
|
|
Author |
Tao, X.Y.; Zhang, X.B.; Zhang, L.; Cheng, J.P.; Liu, F.; Luo, J.H.; Luo, Z.Q.; Geise, H.J. |
|
|
Title |
Synthesis of multi-branched porous carbon nanofibers and their application in electrochemical double-layer capacitors |
Type |
A1 Journal article |
|
Year |
2006 |
Publication |
Carbon |
Abbreviated Journal |
Carbon |
|
|
Volume |
44 |
Issue |
8 |
Pages |
1425-1428 |
|
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
|
Abstract |
|
|
|
Address |
|
|
|
Corporate Author |
|
Thesis |
|
|
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
|
|
Language |
|
Wos |
000237765000008 |
Publication Date |
2006-01-11 |
|
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
|
ISSN |
0008-6223; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
|
Impact Factor |
6.337 |
Times cited |
77 |
Open Access |
|
|
|
Notes |
|
Approved |
Most recent IF: 6.337; 2006 IF: 3.884 |
|
|
Call Number |
UA @ lucian @ c:irua:59477 |
Serial |
3458 |
|
Permanent link to this record |
|
|
|
|
Author |
Titantah, J.T.; Lamoen, D. |
|
|
Title |
sp3/sp2 characterization of carbon materials from first-principles calculations: X-ray photoelectron versus high energy electron energy-loss spectroscopy techniques |
Type |
A1 Journal article |
|
Year |
2005 |
Publication |
Carbon |
Abbreviated Journal |
Carbon |
|
|
Volume |
43 |
Issue |
6 |
Pages |
1311-1316 |
|
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
|
Abstract |
|
|
|
Address |
|
|
|
Corporate Author |
|
Thesis |
|
|
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
|
|
Language |
|
Wos |
000228676400022 |
Publication Date |
2005-02-18 |
|
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
|
ISSN |
0008-6223; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
|
Impact Factor |
6.337 |
Times cited |
70 |
Open Access |
|
|
|
Notes |
|
Approved |
Most recent IF: 6.337; 2005 IF: 3.419 |
|
|
Call Number |
UA @ lucian @ c:irua:51762 |
Serial |
3558 |
|
Permanent link to this record |
|
|
|
|
Author |
He, Z.; Lee, C.S.; Maurice, J.-L.; Pribat, D.; Haghi-Ashtiani, P.; Cojocaru, C.S. |
|
|
Title |
Vertically oriented nickel nanorod/carbon nanofiber core/shell structures synthesized by plasma-enhanced chemical vapor deposition |
Type |
A1 Journal article |
|
Year |
2011 |
Publication |
Carbon |
Abbreviated Journal |
Carbon |
|
|
Volume |
49 |
Issue |
14 |
Pages |
4710-4718 |
|
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
|
Abstract |
Plasma-enhanced chemical vapor deposition, without a nickel-containing gaseous precursor, was used to synthesize continuous nickel (Ni) nanorods inside the hollow cavity of carbon nanofibers (CNFs), thus forming vertically aligned Ni/CNF core/shell structures. Scanning and transmission electron microscopic images indicate that the elongated Ni nanorods originate from the catalyst particles at the tips of the CNFs and that their formation is due to the effect of extrusion induced by the compressive force of the graphene layers during growth. Different from previous work, each vertically-aligned core/shell structure reported is totally isolated from its neighbors. Continuous Ni nanorods are found to separate into smaller ones with increasing growth time, which was ascribed to (i) the limited amount of Ni available in the tip of the CNF, (ii) the polycrystalline nature of the Ni nanorods and (iii) the combined effects of the compressive stresses on the side of the Ni nanorods and of the tensile stress along their axis. |
|
|
Address |
|
|
|
Corporate Author |
|
Thesis |
|
|
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
|
|
Language |
|
Wos |
000295308300010 |
Publication Date |
2011-06-30 |
|
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
|
ISSN |
0008-6223; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
|
Impact Factor |
6.337 |
Times cited |
16 |
Open Access |
|
|
|
Notes |
|
Approved |
Most recent IF: 6.337; 2011 IF: 5.378 |
|
|
Call Number |
UA @ lucian @ c:irua:92782 |
Serial |
3841 |
|
Permanent link to this record |
|
|
|
|
Author |
Lamoen, D.; Parrinello, M. |
|
|
Title |
Geometry and electronic structure of porphyrines and porphyrazines |
Type |
A1 Journal article |
|
Year |
1996 |
Publication |
Chemical Physics Letters |
Abbreviated Journal |
Chem Phys Lett |
|
|
Volume |
248 |
Issue |
|
Pages |
309 |
|
|
Keywords |
A1 Journal article; Electron Microscopy for Materials Science (EMAT); |
|
|
Abstract |
|
|
|
Address |
|
|
|
Corporate Author |
|
Thesis |
|
|
|
Publisher |
|
Place of Publication |
Amsterdam |
Editor |
|
|
|
Language |
|
Wos |
A1996TR41900002 |
Publication Date |
0000-00-00 |
|
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
|
ISSN |
0009-2614 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
|
Impact Factor |
1.897 |
Times cited |
46 |
Open Access |
|
|
|
Notes |
|
Approved |
CHEMISTRY, PHYSICAL 88/144 Q3 # PHYSICS, ATOMIC, MOLECULAR & CHEMICAL 19/35 Q3 # |
|
|
Call Number |
UA @ lucian @ c:irua:15821 |
Serial |
1329 |
|
Permanent link to this record |
|
|
|
|
Author |
Ivanov, V.; Nagy, J.B.; Lambin, P.; Lucas, A.; Zhang, X.B.; Zhang, X.F.; Bernaerts, D.; Van Tendeloo, G.; Amelinckx, S.; van Landuyt, J. |
|
|
Title |
The study of carbon nanotubes produced by catalytic method |
Type |
A1 Journal article |
|
Year |
1994 |
Publication |
Chemical physics letters |
Abbreviated Journal |
Chem Phys Lett |
|
|
Volume |
223 |
Issue |
|
Pages |
329-335 |
|
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
|
Abstract |
|
|
|
Address |
|
|
|
Corporate Author |
|
Thesis |
|
|
|
Publisher |
|
Place of Publication |
Amsterdam |
Editor |
|
|
|
Language |
|
Wos |
A1994NT08000011 |
Publication Date |
0000-00-00 |
|
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
|
ISSN |
0009-2614 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
|
Impact Factor |
1.897 |
Times cited |
405 |
Open Access |
|
|
|
Notes |
|
Approved |
PHYSICS, APPLIED 28/145 Q1 # |
|
|
Call Number |
UA @ lucian @ c:irua:10002 |
Serial |
3326 |
|
Permanent link to this record |
|
|
|
|
Author |
Ning, Y.; Zhang, X.; Wang, Y.; Sun, Y.; Shen, L.; Yang, X.; Van Tendeloo, G. |
|
|
Title |
Bulk production of multi-wall carbon nanotube bundles on sol-gel prepared catalyst |
Type |
A1 Journal article |
|
Year |
2002 |
Publication |
Chemical physics letters |
Abbreviated Journal |
Chem Phys Lett |
|
|
Volume |
366 |
Issue |
5/6 |
Pages |
555-560 |
|
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
|
Abstract |
|
|
|
Address |
|
|
|
Corporate Author |
|
Thesis |
|
|
|
Publisher |
|
Place of Publication |
Amsterdam |
Editor |
|
|
|
Language |
|
Wos |
000179484300017 |
Publication Date |
2002-12-03 |
|
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
|
ISSN |
0009-2614; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
|
Impact Factor |
1.815 |
Times cited |
41 |
Open Access |
|
|
|
Notes |
|
Approved |
Most recent IF: 1.815; 2002 IF: 2.526 |
|
|
Call Number |
UA @ lucian @ c:irua:54776 |
Serial |
262 |
|
Permanent link to this record |
|
|
|
|
Author |
Colomer, J.-F.; Benoit, J.-M.; Stephan, C.; Lefrant, S.; Van Tendeloo, G.; Nagy, J.B. |
|
|
Title |
Characterization of single-wall carbon nanotubes produced by CCVD method |
Type |
A1 Journal article |
|
Year |
2001 |
Publication |
Chemical physics letters |
Abbreviated Journal |
Chem Phys Lett |
|
|
Volume |
345 |
Issue |
|
Pages |
11-17 |
|
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
|
Abstract |
|
|
|
Address |
|
|
|
Corporate Author |
|
Thesis |
|
|
|
Publisher |
|
Place of Publication |
Amsterdam |
Editor |
|
|
|
Language |
|
Wos |
000171066300003 |
Publication Date |
2002-07-25 |
|
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
|
ISSN |
0009-2614; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
|
Impact Factor |
1.815 |
Times cited |
45 |
Open Access |
|
|
|
Notes |
|
Approved |
Most recent IF: 1.815; 2001 IF: 2.364 |
|
|
Call Number |
UA @ lucian @ c:irua:54775 |
Serial |
332 |
|
Permanent link to this record |
|
|
|
|
Author |
Willems, I.; Konya, Z.; Colomer, J.F.; Van Tendeloo, G.; Nagaraju, N.; Fonseca, A.; Nagy, J.B. |
|
|
Title |
Control of the outer diameter of thin carbon nanotubes synthesized by catalytic decomposition of hydrocarbons |
Type |
A1 Journal article |
|
Year |
2000 |
Publication |
Chemical physics letters |
Abbreviated Journal |
Chem Phys Lett |
|
|
Volume |
317 |
Issue |
1-2 |
Pages |
71-76 |
|
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
|
Abstract |
Multi-wall carbon nanotubes have been produced by the catalytic decomposition of acetylene. Go-Mo, Co-V and Co-Fe mixtures supported either on zeolite or corundum alumina were used as catalysts. When Fe or V is added to Co, the carbon deposit increases. The nanotubes were characterized by both low and high resolution TEM. From histograms representing the outer diameter distributions, it is clear that the outer diameter of the nanotubes can be controlled by choosing the appropriate catalyst. (C) 2000 Elsevier Science B.V. All rights reserved. |
|
|
Address |
|
|
|
Corporate Author |
|
Thesis |
|
|
|
Publisher |
|
Place of Publication |
Amsterdam |
Editor |
|
|
|
Language |
|
Wos |
000085128300013 |
Publication Date |
2002-07-25 |
|
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
|
ISSN |
0009-2614; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
|
Impact Factor |
1.815 |
Times cited |
130 |
Open Access |
|
|
|
Notes |
|
Approved |
Most recent IF: 1.815; 2000 IF: 2.364 |
|
|
Call Number |
UA @ lucian @ c:irua:103956 |
Serial |
499 |
|
Permanent link to this record |
|
|
|
|
Author |
Li, Y.; Zhang, X.; Shen, L.; Luo, J.; Tao, X.; Liu, F.; Xu, G.; Wang, Y.; Geise, H.J.; Van Tendeloo, G. |
|
|
Title |
Controlling the diameters in large-scale synthesis of single-walled carbon nanotubes by catalytic decomposition of CH4 |
Type |
A1 Journal article |
|
Year |
2004 |
Publication |
Chemical physics letters |
Abbreviated Journal |
Chem Phys Lett |
|
|
Volume |
398 |
Issue |
1-3 |
Pages |
276-282 |
|
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
|
Abstract |
High-quality single-walled carbon nanotubes (SWNTs) are synthesized in gram amount on Fe-Mo/MgO catalysts by catalytic decomposition of CH4 in H-2 or N-2. Raman data reveal that the as-prepared SATNTs have a diameter of about 0.74-1.29 nm. It is found that the diameter of the as-prepared SWNTs can be controlled mainly by adjusting the molar ratio of Fe-Mo versus the MgO support. Several other factors that potentially influence the growth of SWNTs have been studied in detail. The experimental results show that the nature of the catalyst determines the diameter of the as-prepared SWNTs. (C) 2004 Elsevier B.V. All rights reserved. |
|
|
Address |
|
|
|
Corporate Author |
|
Thesis |
|
|
|
Publisher |
|
Place of Publication |
Amsterdam |
Editor |
|
|
|
Language |
|
Wos |
000224720300050 |
Publication Date |
2004-10-12 |
|
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
|
ISSN |
0009-2614; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
|
Impact Factor |
1.815 |
Times cited |
45 |
Open Access |
|
|
|
Notes |
|
Approved |
Most recent IF: 1.815; 2004 IF: 2.438 |
|
|
Call Number |
UA @ lucian @ c:irua:103720 |
Serial |
507 |
|
Permanent link to this record |
|
|
|
|
Author |
Bittencourt, C.; Felten, A.; Ghijsen, J.; Pireaux, J.-J.; Drube, W.; Erni, R.; Van Tendeloo, G. |
|
|
Title |
Decorating carbon nanotubes with nickel nanoparticles |
Type |
A1 Journal article |
|
Year |
2007 |
Publication |
Chemical physics letters |
Abbreviated Journal |
Chem Phys Lett |
|
|
Volume |
436 |
Issue |
4/6 |
Pages |
368-372 |
|
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
|
Abstract |
|
|
|
Address |
|
|
|
Corporate Author |
|
Thesis |
|
|
|
Publisher |
|
Place of Publication |
Amsterdam |
Editor |
|
|
|
Language |
|
Wos |
000245302000013 |
Publication Date |
2007-01-28 |
|
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
|
ISSN |
0009-2614; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
|
Impact Factor |
1.815 |
Times cited |
78 |
Open Access |
|
|
|
Notes |
Ia-Sfs; Pai 5/1 |
Approved |
Most recent IF: 1.815; 2007 IF: 2.207 |
|
|
Call Number |
UA @ lucian @ c:irua:64310 |
Serial |
611 |
|
Permanent link to this record |
|
|
|
|
Author |
Colomer, J.F.; Stephan, C.; Lefrant, S.; Van Tendeloo, G.; Willems, I.; Konya, Z.; Fonseca, A.; Laurent, C.; Nagy, J.B. |
|
|
Title |
Large-scale synthesis of single-wall carbon nanotubes by catalytic chemical vapor deposition (CCVD) method |
Type |
A1 Journal article |
|
Year |
2000 |
Publication |
Chemical physics letters |
Abbreviated Journal |
Chem Phys Lett |
|
|
Volume |
317 |
Issue |
1-2 |
Pages |
83-89 |
|
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
|
Abstract |
The large-scale production of single-wall carbon nanotubes (SWNTs) is reported. Large quantities of SWNTs can be synthesised by catalytic decomposition of methane over well-dispersed metal particles supported on MgO at 1000 degrees C. The thus produced SWNTs can be separated easily from the support by a simple acidic treatment to obtain a product with high yields (70-80%) of SWNTs. Because the typical synthesis time is 10 min, 1 g of SWNTs can be synthesised per day by this method. The SWNTs are characterized by high-resolution transmission electron microscopy and by Raman spectroscopy, showing the quality and the quantity of products. (C) 2000 Elsevier Science B.V. All rights reserved. |
|
|
Address |
|
|
|
Corporate Author |
|
Thesis |
|
|
|
Publisher |
|
Place of Publication |
Amsterdam |
Editor |
|
|
|
Language |
|
Wos |
000085128300015 |
Publication Date |
2002-07-26 |
|
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
|
ISSN |
0009-2614; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
|
Impact Factor |
1.815 |
Times cited |
344 |
Open Access |
|
|
|
Notes |
|
Approved |
Most recent IF: 1.815; 2000 IF: 2.364 |
|
|
Call Number |
UA @ lucian @ c:irua:103957 |
Serial |
1782 |
|
Permanent link to this record |