| Records |
| Author |
Samaeeaghmiyoni, V.; Idrissi, H.; Groten, J.; Schwaiger, R.; Schryvers, D. |
| Title |
Quantitative in-situ TEM nanotensile testing of single crystal Ni facilitated by a new sample preparation approach |
Type |
A1 Journal article |
| Year |
2017 |
Publication |
Micron |
Abbreviated Journal |
Micron |
| Volume |
94 |
Issue |
94 |
Pages |
66-73 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
Twin-jet electro-polishing and Focused Ion Beam (FIB) were combined to produce small size Nickel single crystal specimens for quantitative in-situ nanotensile experiments in the transmission electron microscope. The combination of these techniques allows producing samples with nearly defect-free zones in the centre in contrast to conventional FIB-prepared samples. Since TEM investigations can be performed on the electro-polished samples prior to in-situ TEM straining, specimens with desired crystallographic orientation and initial microstructure can be prepared. The present results reveal a dislocation nucleation controlled plasticity, in which small loops induced by FIB near the edges of the samples play a central role. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
000393247300008 |
Publication Date |
2016-12-21 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
ISSN  |
0968-4328 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
1.98 |
Times cited |
11 |
Open Access |
OpenAccess |
| Notes |
This research has been performed with the financial support of the Belgian Science Policy (Belspo) under the framework of the interuniversity attraction poles program, IAP7/21. Financial support from the Flemish (FWO) and German Research Foundation (DFG) through the European M-ERA.NET project “FaSS” (Fatigue Simulation near Surfaces) under the grant numbers GA.014.13N and SCHW855/5-1, respectively, is gratefully acknowledged. V. Samaeeaghmiyoni also acknowledges the FWO research project G012012N “Understanding nanocrystalline mechanical behaviour from structural investigations”. H. Idrissi is currently mandated by the Belgian National Fund for Scientific Research (FSR-FNRS). |
Approved |
Most recent IF: 1.98 |
| Call Number |
EMAT @ emat @ c:irua:139515 |
Serial |
4341 |
| Permanent link to this record |
| |
|
| |
| Author |
Cooper, D.; Denneulin, T.; Bernier, N.; Béché, A.; Rouvière, J.-L. |
| Title |
Strain mapping of semiconductor specimens with nm-scale resolution in a transmission electron microscope |
Type |
A1 Journal article |
| Year |
2016 |
Publication |
Micron |
Abbreviated Journal |
Micron |
| Volume |
80 |
Issue |
80 |
Pages |
145-165 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
The last few years have seen a great deal of progress in the development of transmission electron microscopy based techniques for strain mapping. New techniques have appeared such as dark field electron holography and nanobeam diffraction and better known ones such as geometrical phase analysis have been improved by using aberration corrected ultra-stable modern electron microscopes. In this paper we apply dark field electron holography, the geometrical phase analysis of high angle annular dark field scanning transmission electron microscopy images, nanobeam diffraction and precession diffraction, all performed at the state-of-the-art to five different types of semiconductor samples. These include a simple calibration structure comprising 10-nm-thick SiGe layers to benchmark the techniques. A SiGe recessed source and drain device has been examined in order to test their capabilities on 2D structures. Devices that have been strained using a nitride stressor have been examined to test the sensitivity of the different techniques when applied to systems containing low values of deformation. To test the techniques on modern semiconductors, an electrically tested device grown on a SOI wafer has been examined. Finally a GaN/AlN superlattice was tested in order to assess the different methods of measuring deformation on specimens that do not have a perfect crystalline structure. The different deformation mapping techniques have been compared to one another and the strengths and weaknesses of each are discussed. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
Oxford |
Editor |
|
| Language |
|
Wos |
000366770100018 |
Publication Date |
2015-09-15 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0968-4328 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
1.98 |
Times cited |
50 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 1.98 |
| Call Number |
UA @ lucian @ c:irua:136446 |
Serial |
4401 |
| Permanent link to this record |
| |
|
| |
| Author |
Godet, M.; Vergès-Belmin, V.; Gauquelin, N.; Saheb, M.; Monnier, J.; Leroy, E.; Bourgon, J.; Verbeeck, J.; Andraud, C. |
| Title |
Nanoscale investigation by TEM and STEM-EELS of the laser induced yellowing |
Type |
A1 Journal article |
| Year |
2018 |
Publication |
Micron |
Abbreviated Journal |
Micron |
| Volume |
115 |
Issue |
|
Pages |
25-31 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
Nd-YAG QS laser cleaning of soiled stone at 1064 nm can sometimes result in a more yellow appearance compared to other cleaning techniques. Especially in France, this yellowing effect is still considered as a major aesthetic issue by the architects and conservators. One explanation states that the yellowing is linked to the formation of iron-rich nanophase(s) through the laser beam interaction with black crusts that would re-deposit on the cleaned substrate after irradiation. To characterize these nanophases, a model crust containing hematite was elaborated and laser irradiated using a Nd-YAG QS laser. The color of the sample shifted instantaneously from red to a bright yellow and numerous particles were ablated in a visible smoke. Transmission electron microscopy (TEM) was used to examine the morphology and the crystallinity of the neo-formed compounds, both on the surface of the samples and in the ablated materials. In addition, an investigation of the chemical and structural properties of the nanophases was conducted by X-ray dispersive energy (EDX) and electron energy loss (EELS) spectroscopies. It was found that both the surface of the sample and the ablated materials are covered by crystallized nano-spheres and nano-residues, all containing iron and oxygen, sometimes along with calcium and sulfur. In particular an interfacial area containing the four elements was evidenced between some nanostructures and the substrate. Magnetite Fe3O4 was also identified at the nanoscale. This study demonstrates that the laser yellowing of a model crust is linked to the presence of iron-rich nanophases including CaxFeySzOδ nanostructures and magnetite Fe3O4 at the surface after irradiation. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
000449125600004 |
Publication Date |
2018-08-18 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0968-4328 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
1.98 |
Times cited |
9 |
Open Access |
Not_Open_Access: Available from 19.08.2020
|
| Notes |
The authors wish to thank Valérie Lalanne for the sample preparation for TEM and Stijn Van den Broeck for the FIB cut elaboration. The research leading to these results has received funding from the European Union Seventh Framework Programme under Grant Agreement 312483 – ESTEEM2 (Integrated Infrastructure Initiative–I3). |
Approved |
Most recent IF: 1.98 |
| Call Number |
EMAT @ emat @c:irua:154356UA @ admin @ c:irua:154356 |
Serial |
5056 |
| Permanent link to this record |
| |
|
| |
| Author |
De Meyer, R.; Albrecht, W.; Bals, S. |
| Title |
Effectiveness of reducing the influence of CTAB at the surface of metal nanoparticles during in situ heating studies by TEM |
Type |
A1 Journal article |
| Year |
2021 |
Publication |
Micron |
Abbreviated Journal |
Micron |
| Volume |
144 |
Issue |
|
Pages |
103036 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
In situ TEM is a valuable technique to offer novel insights in the behavior of nanomaterials under various conditions. However, interpretation of in situ experiments is not straightforward since the electron beam can impact the outcome of such measurements. For example, ligands surrounding metal nanoparticles transform into a protective carbon layer upon electron beam irradiation and may impact the apparent thermal stability during in situ heating experiments. In this work, we explore the effect of different treatments typically proposed to remove such ligands. We found that plasma treatment prior to heating experiments for Au nanorods and nanostars increased the apparent thermal stability of the nanoparticles, while an activated carbon treatment resulted in a decrease of the observed thermal stability. Treatment with HCl barely changed the experimental outcome. These results demonstrate the importance of carefully selecting pre-treatments procedures during in situ heating experiments. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
000632282600002 |
Publication Date |
2021-02-19 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0968-4328 |
ISBN |
|
Additional Links |
UA library record; WoS full record |
| Impact Factor |
1.98 |
Times cited |
|
Open Access |
OpenAccess |
| Notes |
H2020; European Research Council; This work was supported by the European Union’s Horizon 2020 research and innovation program [grant agreement No 823717 (ESTEEM3) and No 815128 (REALNANO)]; We acknowledge Prof. Luis M. Liz-Marzán and co-workers of the Bionanoplasmonics Laboratory, CICbiomaGUNE, Spain for providing the Au nanoparticles.; sygma; esteem3jra; esteem3reported |
Approved |
Most recent IF: 1.98 |
| Call Number |
EMAT @ emat @c:irua:175874 |
Serial |
6677 |
| Permanent link to this record |
| |
|
| |
| Author |
Jain, N.; Hao, Y.; Parekh, U.; Kaltenegger, M.; Pedrazo-Tardajos, A.; Lazzaroni, R.; Resel, R.; Geerts, Y.H.; Bals, S.; Van Aert, S. |
| Title |
Exploring the effects of graphene and temperature in reducing electron beam damage: A TEM and electron diffraction-based quantitative study on Lead Phthalocyanine (PbPc) crystals |
Type |
A1 Journal article |
| Year |
2023 |
Publication |
Micron |
Abbreviated Journal |
|
| Volume |
169 |
Issue |
|
Pages |
103444 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
High-resolution transmission electron microscopy (TEM) of organic crystals, such as Lead Phthalocyanine (PbPc), is very challenging since these materials are prone to electron beam damage leading to the breakdown of the crystal structure during investigation. Quantification of the damage is imperative to enable high-resolution imaging of PbPc crystals with minimum structural changes. In this work, we performed a detailed electron diffraction study to quantitatively measure degradation of PbPc crystals upon electron beam irradiation. Our study is based on the quantification of the fading intensity of the spots in the electron diffraction patterns. At various incident dose rates (e/Å2/s) and acceleration voltages, we experimentally extracted the decay rate (1/s), which directly correlates with the rate of beam damage. In this manner, a value for the critical dose (e/Å2) could be determined, which can be used as a measure to quantify beam damage. Using the same methodology, we explored the influence of cryogenic temperatures, graphene TEM substrates, and graphene encapsulation in prolonging the lifetime of the PbPc crystal structure during TEM investigation. The knowledge obtained by diffraction experiments is then translated to real space high-resolution TEM imaging of PbPc. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
000965998800001 |
Publication Date |
2023-03-21 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0968-4328 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
2.4 |
Times cited |
1 |
Open Access |
OpenAccess |
| Notes |
This work is supported by FWO and FNRS within the 2Dto3D network of the EOS (Excellence of Science) program (grant number 30489208) and ERC-CoGREALNANO-815128 (to Prof. Dr. Sara Bals). N.J. would like to thank Dr. Kunal S. Mali and Dr. Da Wang for useful and interesting discussions on sample preparation procedures. |
Approved |
Most recent IF: 2.4; 2023 IF: 1.98 |
| Call Number |
EMAT @ emat @c:irua:196069 |
Serial |
7379 |
| Permanent link to this record |
| |
|
| |
| Author |
Van Passel, S. |
| Title |
Food miles to assess sustainability : a revision |
Type |
A1 Journal article |
| Year |
2013 |
Publication |
Sustainable Development |
Abbreviated Journal |
Sustain Dev |
| Volume |
21 |
Issue |
1 |
Pages |
1-17 |
| Keywords |
A1 Journal article; Economics; Engineering Management (ENM) |
| Abstract |
Sustainability assessment is an essential process in our aim to reach a more sustainable production and consumption pattern. This research revises the food miles concept as a guiding tool to assess sustainability. Food miles measure the distance that food travels from where it is grown or raised to where it is consumed. Three different concepts to assess sustainability are described: (i) food miles, (ii) enhanced food miles, (iii) food chain sustainability. An illustrative case study shows that there is a strong danger of oversimplification when using food miles as an assessment tool. Second, the food miles concept can be enhanced with all relevant transport externalities taking into account different transport modes and transport (in)efficiency. Third, all relevant economic, social, and ecological aspects should be taken into account. Besides transport externalities, also externalities caused by food production, food packaging, food marketing, and food consumption should be incorporated. Moreover, the trade-off with development goals cannot be neglected. As a consequence, there is a strong danger of incommensurability as the result of different sustainability model assumptions and unclear system boundaries. Nevertheless, sustainability assessment can enrich policy making and support tailored policy measures to improve food chain sustainability. Copyright (c) 2010 John Wiley & Sons, Ltd and ERP Environment. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
000314187900001 |
Publication Date |
2010-07-15 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0968-0802 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
2.167 |
Times cited |
17 |
Open Access |
|
| Notes |
; ; |
Approved |
Most recent IF: 2.167; 2013 IF: 1.692 |
| Call Number |
UA @ admin @ c:irua:127553 |
Serial |
6204 |
| Permanent link to this record |
| |
|
| |
| Author |
Schryvers, D.; Holland-Moritz, D. |
| Title |
Austenite and martensite microstructures in splat-cooled Ni-Al |
Type |
A1 Journal article |
| Year |
1998 |
Publication |
Intermetallics |
Abbreviated Journal |
Intermetallics |
| Volume |
6 |
Issue |
|
Pages |
427-436 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
|
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
Chicago, Ill. |
Editor |
|
| Language |
|
Wos |
000074235500010 |
Publication Date |
2002-07-25 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0966-9795; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.14 |
Times cited |
13 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 3.14; 1998 IF: 1.785 |
| Call Number |
UA @ lucian @ c:irua:48365 |
Serial |
209 |
| Permanent link to this record |
| |
|
| |
| Author |
Zelaya, E.; Schryvers, D.; Tolley, A.; Fitchner, P.F.P. |
| Title |
Cavity nucleation and growth in Cu-Zn-Al irradiated with Cu+ ions at different temperatures |
Type |
A1 Journal article |
| Year |
2010 |
Publication |
Intermetallics |
Abbreviated Journal |
Intermetallics |
| Volume |
18 |
Issue |
4 |
Pages |
493-498 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
The effects of high dose ion irradiation in β CuZnAl were investigated between room temperature and 150 °C. Single crystal samples with surface normal close to [001]β were irradiated with 300 keV Cu+ ions. Microstructural changes were characterized using transmission electron microscopy. Irradiation induced cavities located on the surface exposed to the irradiation were observed. The morphology, size and density distribution of these cavities were analyzed as a function of different irradiation conditions. The shape and location of the cavities with respect to the irradiation surface were not affected by irradiation temperature or irradiation dose. Instead, the cavity size distribution showed a bi-modal shape for a dose of 15 dpa, regardless of irradiation temperature. For a dose of 30 dpa the bi-modal distribution was only observed after room temperature irradiation. The diffusion effects of vacancies produced by irradiation are analyzed in shape memory CuZnAl alloys, which main characteristic is the diffusionless martensitic transformation. Particularly, the cavity size distributions were analyzed in terms of nucleation, growth and coalescence. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
Chicago, Ill. |
Editor |
|
| Language |
|
Wos |
000276058200014 |
Publication Date |
2009-10-17 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0966-9795; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.14 |
Times cited |
1 |
Open Access |
|
| Notes |
Iaea |
Approved |
Most recent IF: 3.14; 2010 IF: 2.335 |
| Call Number |
UA @ lucian @ c:irua:80924 |
Serial |
302 |
| Permanent link to this record |
| |
|
| |
| Author |
Srivastava, A.K.; Schryvers, D.; van Humbeeck, J. |
| Title |
Grain growth and precipitation in an annealed cold-rolled Ni50.2Ti49.8 alloy |
Type |
A1 Journal article |
| Year |
2007 |
Publication |
Intermetallics |
Abbreviated Journal |
Intermetallics |
| Volume |
15 |
Issue |
12 |
Pages |
1538-1547 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
|
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
Chicago, Ill. |
Editor |
|
| Language |
|
Wos |
000250930300006 |
Publication Date |
2007-08-17 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0966-9795; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.14 |
Times cited |
37 |
Open Access |
|
| Notes |
FWO project G.0465.05; EU RTN |
Approved |
Most recent IF: 3.14; 2007 IF: 2.219 |
| Call Number |
UA @ lucian @ c:irua:65851 |
Serial |
1363 |
| Permanent link to this record |
| |
|
| |
| Author |
Satto, C.; Ledda, A.; Potapov, P.; Janssens, J.F.; Schryvers, D. |
| Title |
Phase transformations and precipitation in amorphous Ti50Ni25Cu25 ribbons |
Type |
A1 Journal article |
| Year |
2001 |
Publication |
Intermetallics |
Abbreviated Journal |
Intermetallics |
| Volume |
9 |
Issue |
|
Pages |
395-401 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
|
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
Chicago, Ill. |
Editor |
|
| Language |
|
Wos |
000168882500005 |
Publication Date |
2002-07-25 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0966-9795; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.14 |
Times cited |
16 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 3.14; 2001 IF: 1.239 |
| Call Number |
UA @ lucian @ c:irua:48367 |
Serial |
2590 |
| Permanent link to this record |
| |
|
| |
| Author |
Samajdar, I.; Ratchev, P.; Verlinden, B.; Schryvers, D. |
| Title |
Recrystallization and grain growth in a B2 iron aluminide alloy |
Type |
A1 Journal article |
| Year |
1998 |
Publication |
Intermetallics |
Abbreviated Journal |
Intermetallics |
| Volume |
6 |
Issue |
|
Pages |
419-425 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
|
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
Chicago, Ill. |
Editor |
|
| Language |
|
Wos |
000074235500009 |
Publication Date |
2002-07-25 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0966-9795; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.14 |
Times cited |
17 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 3.14; 1998 IF: 1.785 |
| Call Number |
UA @ lucian @ c:irua:48366 |
Serial |
2846 |
| Permanent link to this record |
| |
|
| |
| Author |
Delville, R.; Schryvers, D. |
| Title |
Transmission electron microscopy study of combined precipitation of Ti2Ni(Pd) and Ti2Pd(Ni) in a Ti50Ni30Pd20 alloy |
Type |
A1 Journal article |
| Year |
2010 |
Publication |
Intermetallics |
Abbreviated Journal |
Intermetallics |
| Volume |
18 |
Issue |
12 |
Pages |
2353-2360 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
We report a new mode of precipitation in a B19 martensitic Ti50Ni30Pd20 shape memory alloy consisting of a central Ti2Ni(Pd) precipitate surrounded by an austenite area containing Ti2Pd(Ni) precipitates. The morphology and crystallography of the precipitation area is investigated using conventional and high resolution electron microscopy. In particular, the orientation relationship and the coherency strain between the Ti2Pd(Ni) precipitate and the surrounding retained B2 matrix are discussed. A study of local composition in relation with a ternary phase diagram using X-ray energy dispersive spectroscopy with a nanoprobe gives evidences of the formation mechanism. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
Chicago, Ill. |
Editor |
|
| Language |
|
Wos |
000284447500014 |
Publication Date |
2010-09-04 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0966-9795; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.14 |
Times cited |
9 |
Open Access |
|
| Notes |
Multimat; Iap |
Approved |
Most recent IF: 3.14; 2010 IF: 2.335 |
| Call Number |
UA @ lucian @ c:irua:84473 |
Serial |
3714 |
| Permanent link to this record |
| |
|
| |
| Author |
Santamarta, R.; Schryvers, D. |
| Title |
Twinned b.c.c. sherical particles in a partially crystallised Ti50Ni25Cu25 melt-spun ribbon |
Type |
A1 Journal article |
| Year |
2004 |
Publication |
Intermetallics |
Abbreviated Journal |
Intermetallics |
| Volume |
12 |
Issue |
|
Pages |
341-348 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
|
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
Chicago, Ill. |
Editor |
|
| Language |
|
Wos |
000189229300012 |
Publication Date |
2004-01-29 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0966-9795; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.14 |
Times cited |
14 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 3.14; 2004 IF: 1.770 |
| Call Number |
UA @ lucian @ c:irua:48369 |
Serial |
3767 |
| Permanent link to this record |
| |
|
| |
| Author |
Potgieter-Vermaak, S.; Van Grieken, R.; Potgieter, J.H. |
| Title |
Integrated analytical techniques for the characterisation of environmental particles |
Type |
A1 Journal article |
| Year |
2010 |
Publication |
Spectroscopy Europe |
Abbreviated Journal |
|
| Volume |
22 |
Issue |
5 |
Pages |
12-15 |
| Keywords |
A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation) |
| Abstract |
|
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
|
Publication Date |
|
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0966-0941; 2634-2561 |
ISBN |
|
Additional Links |
UA library record |
| Impact Factor |
|
Times cited |
|
Open Access |
|
| Notes |
|
Approved |
no |
| Call Number |
UA @ admin @ c:irua:85517 |
Serial |
8109 |
| Permanent link to this record |
| |
|
| |
| Author |
Yandouzi, M.; Toth, L.; Schryvers, D. |
| Title |
High resolution transmission electron microscopy study of nanoscale Ni-rich Ni-Al films evaporated onto NaCl and KCl |
Type |
A1 Journal article |
| Year |
1998 |
Publication |
Nanostructured materials |
Abbreviated Journal |
Nanostruct Mater |
| Volume |
10 |
Issue |
|
Pages |
99-115 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
|
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
New York |
Editor |
|
| Language |
|
Wos |
000073840600011 |
Publication Date |
2002-07-25 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0965-9773; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
|
Times cited |
2 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: NA |
| Call Number |
UA @ lucian @ c:irua:48370 |
Serial |
1463 |
| Permanent link to this record |
| |
|
| |
| Author |
Oleshko, V.P.; van Daele, A.; Gijbels, R.H.; Jacob, W.A. |
| Title |
Structural and analytical characterization of Ag(Br,I) nanocrystals by cryo-AEM techniques |
Type |
A1 Journal article |
| Year |
1998 |
Publication |
Journal of nanostructured materials |
Abbreviated Journal |
Nanostruct Mater |
| Volume |
10 |
Issue |
8 |
Pages |
1225-1246 |
| Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
| Abstract |
|
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
000079226900001 |
Publication Date |
2002-07-25 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0965-9773; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
|
Times cited |
5 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: NA |
| Call Number |
UA @ lucian @ c:irua:24909 |
Serial |
3190 |
| Permanent link to this record |
| |
|
| |
| Author |
Hosseininia, G.; Rafiaani Khachak, P.; Nooripoor, M.; Van Passel, S.; Azadi, H. |
| Title |
Understanding communicational behavior among rangelands' stakeholders : application of social network analysis |
Type |
A1 Journal article |
| Year |
2016 |
Publication |
Journal Of Environmental Planning And Management |
Abbreviated Journal |
J Environ Plann Man |
| Volume |
59 |
Issue |
2 |
Pages |
320-341 |
| Keywords |
A1 Journal article; Economics; Engineering Management (ENM) |
| Abstract |
Understanding communicational behavior of rangelands stakeholders is fundamental for effective development of rangeland management plans. This study aimed to understand differences between stakeholders relations among various actors involved in rangeland management using social network analysis (SNA). A survey was conducted on 334 stakeholders (89 extension agents, 110 researchers and 135 executive agents) in the Tehran province, Iran. Results showed that all the three groups of stakeholders are interested in making contact mainly within their own group. Furthermore, while the executive agents have shared the strongest technical and friendship relations with the two other groups, the extension agents established the strongest administrative interactions. The researchers, however, made a poor link especially with the extension agents. The study concluded that SNA could be an efficient tool to assess communicational behavior in rangeland management. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
000366383400008 |
Publication Date |
2015-03-17 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0964-0568 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
1.56 |
Times cited |
1 |
Open Access |
|
| Notes |
; ; |
Approved |
Most recent IF: 1.56 |
| Call Number |
UA @ admin @ c:irua:136755 |
Serial |
6274 |
| Permanent link to this record |
| |
|
| |
| Author |
Motamedi, J.; Azadi, H.; Alijanpour, A.; Shafiei, A.B.; Sheidai-Karkaj, E.; Mofidi-Chelan, M.; Moghaddam, S.M.; Van Passel, S.; Witlox, F. |
| Title |
Economic indices of by-products utilization and forage production in semi-arid rangelands |
Type |
A1 Journal article |
| Year |
2022 |
Publication |
Journal of environmental planning and management |
Abbreviated Journal |
J Environ Plann Man |
| Volume |
|
Issue |
|
Pages |
1-29 |
| Keywords |
A1 Journal article; Sociology; Law; Engineering Management (ENM) |
| Abstract |
One of the most basic criteria in documenting rangeland use prospects is the recognition of byproducts and their economic appraisal. The current study was conducted to assess the economic indices of exploiting byproduct production in Shahindej, Northwest Iran. For this purpose, 24 by-product-generating species were selected in 114 locations that belong to 49 rangeland units. The total expected value of 24 by-product generating species yield and forage production was calculated at 44.22 USD ha(-1). The results of this study showed that the sustainability of natural resources depends on the effective participation and empowerment of local communities. Furthermore, by-product exploitation contributes significantly to the local economy and employment while also reducing grazing intensity. Overall, the findings of this study show that by-product earnings should be considered in range management schemes and comprehensive natural-area management. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
000830614200001 |
Publication Date |
2022-07-26 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0964-0568 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
1.56 |
Times cited |
|
Open Access |
Not_Open_Access |
| Notes |
|
Approved |
Most recent IF: NA |
| Call Number |
UA @ admin @ c:irua:189725 |
Serial |
7355 |
| Permanent link to this record |
| |
|
| |
| Author |
Kolev, S.; Bogaerts, A. |
| Title |
A 2D model for a gliding arc discharge |
Type |
A1 Journal article |
| Year |
2015 |
Publication |
Plasma sources science and technology |
Abbreviated Journal |
Plasma Sources Sci T |
| Volume |
24 |
Issue |
24 |
Pages |
015025 |
| Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
| Abstract |
In this study we report on a 2D fluid model of a gliding arc discharge in argon. Despite the 3D nature of the discharge, 2D models are found to be capable of providing very useful information about the operation of the discharge. We employ two modelsan axisymmetric and a Cartesian one. We show that for the considered experiment and the conditions of a low current arc (around 30 mA) in argon, there is no significant heating of the cathode surface and the discharge is sustained by field electron emission from the cathode accompanied by the formation of a cathode spot. The obtained discharge power and voltage are relatively sensitive to the surface properties and particularly to the surface roughness, causing effectively an amplification of the normal electric field. The arc body and anode region are not influenced by this and depend mainly on the current value. The gliding of the arc is modelled by means of a 2D Cartesian model. The arcelectrode contact points are analysed and the gliding mechanism along the electrode surface is discussed. Following experimental observations, the cathode spot is simulated as jumping from one point to another. A complete arc cycle is modelled from initial ignition to arc decay. The results show that there is no interaction between the successive gliding arcs. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
Institute of Physics |
Place of Publication |
Bristol |
Editor |
|
| Language |
|
Wos |
000348298200026 |
Publication Date |
2014-12-23 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0963-0252;1361-6595; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.302 |
Times cited |
34 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 3.302; 2015 IF: 3.591 |
| Call Number |
c:irua:122538 c:irua:122538 c:irua:122538 c:irua:122538 |
Serial |
3 |
| Permanent link to this record |
| |
|
| |
| Author |
Bultinck, E.; Bogaerts, A. |
| Title |
Characterization of an Ar/O2 magnetron plasma by a multi-species Monte Carlo model |
Type |
A1 Journal article |
| Year |
2011 |
Publication |
Plasma sources science and technology |
Abbreviated Journal |
Plasma Sources Sci T |
| Volume |
20 |
Issue |
4 |
Pages |
045013-045013,12 |
| Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
| Abstract |
A combined Monte Carlo (MC)/analytical surface model is developed to study the plasma processes occurring during the reactive sputter deposition of TiOx thin films. This model describes the important plasma species with a MC approach (i.e. electrons, Ar+ ions, {\rm O}_2 |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
Institute of Physics |
Place of Publication |
Bristol |
Editor |
|
| Language |
|
Wos |
000295829800015 |
Publication Date |
2011-06-14 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0963-0252;1361-6595; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.302 |
Times cited |
7 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 3.302; 2011 IF: 2.521 |
| Call Number |
UA @ lucian @ c:irua:89732 |
Serial |
316 |
| Permanent link to this record |
| |
|
| |
| Author |
Bogaerts, A. |
| Title |
Comprehensive modelling network for dc glow discharges in argon |
Type |
A1 Journal article |
| Year |
1999 |
Publication |
Plasma sources science and technology |
Abbreviated Journal |
Plasma Sources Sci T |
| Volume |
8 |
Issue |
|
Pages |
210-229 |
| Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
| Abstract |
|
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
Institute of Physics |
Place of Publication |
Bristol |
Editor |
|
| Language |
|
Wos |
000080660600004 |
Publication Date |
2002-08-25 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0963-0252;1361-6595; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.302 |
Times cited |
27 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 3.302; 1999 IF: 2.038 |
| Call Number |
UA @ lucian @ c:irua:24129 |
Serial |
451 |
| Permanent link to this record |
| |
|
| |
| Author |
Tinck, S.; Bogaerts, A. |
| Title |
Computer simulations of an oxygen inductively coupled plasma used for plasma-assisted atomic layer deposition |
Type |
A1 Journal article |
| Year |
2011 |
Publication |
Plasma sources science and technology |
Abbreviated Journal |
Plasma Sources Sci T |
| Volume |
20 |
Issue |
1 |
Pages |
015008-015008,10 |
| Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
| Abstract |
In this paper, an O2 inductively coupled plasma used for plasma enhanced atomic layer deposition of Al2O3 thin films is investigated by means of modeling. This work intends to provide more information about basic plasma properties such as species densities and species fluxes to the substrate as a function of power and pressure, which might be hard to measure experimentally. For this purpose, a hybrid model developed by Kushner et al is applied to calculate the plasma characteristics in the reactor volume for different chamber pressures ranging from 1 to 10 mTorr and different coil powers ranging from 50 to 500 W. Density profiles of the various oxygen containing plasma species are reported as well as fluxes to the substrate under various operating conditions. Furthermore, different orientations of the substrate, which can be placed vertically or horizontally in the reactor, are taken into account. In addition, special attention is paid to the recombination process of atomic oxygen on the different reactor walls under the stated operating conditions. From this work it can be concluded that the plasma properties change significantly in different locations of the reactor. The plasma density near the cylindrical coil is high, while it is almost negligible in the neighborhood of the substrate. Ion and excited species fluxes to the substrate are found to be very low and negligible. Finally, the orientation of the substrate has a minor effect on the flux of O2, while it has a significant effect on the flux of O. In the horizontal configuration, the flux of atomic oxygen can be up to one order of magnitude lower than in the vertical configuration. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
Institute of Physics |
Place of Publication |
Bristol |
Editor |
|
| Language |
|
Wos |
000286592200009 |
Publication Date |
2011-01-08 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0963-0252;1361-6595; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.302 |
Times cited |
11 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 3.302; 2011 IF: 2.521 |
| Call Number |
UA @ lucian @ c:irua:85285 |
Serial |
467 |
| Permanent link to this record |
| |
|
| |
| Author |
Paulussen, S.; Verheyde, B.; Tu, X.; De Bie, C.; Martens, T.; Petrovic, D.; Bogaerts, A.; Sels, B. |
| Title |
Conversion of carbon dioxide to value-added chemicals in atmospheric pressure dielectric barrier discharges |
Type |
A1 Journal article |
| Year |
2010 |
Publication |
Plasma sources science and technology |
Abbreviated Journal |
Plasma Sources Sci T |
| Volume |
19 |
Issue |
3 |
Pages |
034015,1-034015,6 |
| Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
| Abstract |
The aim of this work consists of the evaluation of atmospheric pressure dielectric barrier discharges for the conversion of greenhouse gases into useful compounds. Therefore, pure CO2 feed flows are administered to the discharge zone at varying discharge frequency, power input, gas temperature and feed flow rates, aiming at the formation of CO and O2. The discharge obtained in CO2 is characterized as a filamentary mode with a microdischarge zone in each half cycle of the applied voltage. It is shown that the most important parameter affecting the CO2-conversion levels is the gas flow rate. At low flow rates, both the conversion and the CO-yield are significantly higher. In addition, also an increase in the gas temperature and the power input give rise to higher conversion levels, although the effect on the CO-yield is limited. The optimum discharge frequency depends on the power input level and it cannot be unambiguously stated that higher frequencies give rise to increased conversion levels. A maximum CO2 conversion of 30% is achieved at a flow rate of 0.05 L min−1, a power density of 14.75 W cm−3 and a frequency of 60 kHz. The most energy efficient conversions are achieved at a flow rate of 0.2 L min−1, a power density of 11 W cm−3 and a discharge frequency of 30 kHz. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
Institute of Physics |
Place of Publication |
Bristol |
Editor |
|
| Language |
|
Wos |
000277982800016 |
Publication Date |
2010-05-22 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0963-0252;1361-6595; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.302 |
Times cited |
116 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 3.302; 2010 IF: 2.218 |
| Call Number |
UA @ lucian @ c:irua:82408 |
Serial |
512 |
| Permanent link to this record |
| |
|
| |
| Author |
De Bie, C.; Martens, T.; van Dijk, J.; Paulussen, S.; Verheyde, B.; Corthals, S.; Bogaerts, A. |
| Title |
Dielectric barrier discharges used for the conversion of greenhouse gases: modeling the plasma chemistry by fluid simulations |
Type |
A1 Journal article |
| Year |
2011 |
Publication |
Plasma sources science and technology |
Abbreviated Journal |
Plasma Sources Sci T |
| Volume |
20 |
Issue |
2 |
Pages |
024008,1-024008,11 |
| Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
| Abstract |
The conversion of methane to value-added chemicals and fuels is considered to be one of the challenges of the 21st century. In this paper we study, by means of fluid modeling, the conversion of methane to higher hydrocarbons or oxygenates by partial oxidation with CO2 or O2 in a dielectric barrier discharge. Sixty-nine different plasma species (electrons, ions, molecules, radicals) are included in the model, as well as a comprehensive set of chemical reactions. The calculation results presented in this paper include the conversion of the reactants and the yields of the reaction products as a function of residence time in the reactor, for different gas mixing ratios. Syngas (i.e. H2 + CO) and higher hydrocarbons (C2Hx) are typically found to be important reaction products. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
Institute of Physics |
Place of Publication |
Bristol |
Editor |
|
| Language |
|
Wos |
000290719900009 |
Publication Date |
2011-04-02 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0963-0252;1361-6595; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.302 |
Times cited |
38 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 3.302; 2011 IF: 2.521 |
| Call Number |
UA @ lucian @ c:irua:87868 |
Serial |
689 |
| Permanent link to this record |
| |
|
| |
| Author |
Peerenboom, K.; Parente, A.; Kozák, T.; Bogaerts, A.; Degrez, G. |
| Title |
Dimension reduction of non-equilibrium plasma kinetic models using principal component analysis |
Type |
A1 Journal article |
| Year |
2015 |
Publication |
Plasma sources science and technology |
Abbreviated Journal |
Plasma Sources Sci T |
| Volume |
24 |
Issue |
24 |
Pages |
025004 |
| Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
| Abstract |
The chemical complexity of non-equilibrium plasmas poses a challenge for plasma modeling because of the computational load. This paper presents a dimension reduction method for such chemically complex plasmas based on principal component analysis (PCA). PCA is used to identify a low-dimensional manifold in chemical state space that is described by a small number of parameters: the principal components. Reduction is obtained since continuity equations only need to be solved for these principal components and not for all the species. Application of the presented method to a CO2 plasma model including state-to-state vibrational kinetics of CO2 and CO demonstrates the potential of the PCA method for dimension reduction. A manifold described by only two principal components is able to predict the CO2 to CO conversion at varying ionization degrees very accurately. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
Institute of Physics |
Place of Publication |
Bristol |
Editor |
|
| Language |
|
Wos |
000356816200008 |
Publication Date |
2015-01-27 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0963-0252;1361-6595; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.302 |
Times cited |
11 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 3.302; 2015 IF: 3.591 |
| Call Number |
c:irua:123534 |
Serial |
704 |
| Permanent link to this record |
| |
|
| |
| Author |
Zhao, S.-X.; Gao, F.; Wang, Y.-N.; Bogaerts, A. |
| Title |
The effect of F2 attachment by low-energy electrons on the electron behaviour in an Ar/CF4 inductively coupled plasma |
Type |
A1 Journal article |
| Year |
2012 |
Publication |
Plasma sources science and technology |
Abbreviated Journal |
Plasma Sources Sci T |
| Volume |
21 |
Issue |
2 |
Pages |
025008-025008,13 |
| Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
| Abstract |
The electron behaviour in an Ar/CF4 inductively coupled plasma is investigated by a Langmuir probe and a hybrid model. The simulated and measured results include electron density, temperature and electron energy distribution function for different values of Ar/CF4 ratio, coil power and gas pressure. The hybrid plasma equipment model simulations show qualitative agreement with experiment. The effect of F2 electron attachment on the electron behaviour is explored by comparing two sets of data based on different F atom boundary conditions. It is demonstrated that electron attachment at F2 molecules is responsible for the depletion of low-energy electrons, causing a density decrease as well as a temperature increase when CF4 is added to an Ar plasma. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
Institute of Physics |
Place of Publication |
Bristol |
Editor |
|
| Language |
|
Wos |
000302779400022 |
Publication Date |
2012-03-12 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0963-0252;1361-6595; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.302 |
Times cited |
23 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 3.302; 2012 IF: 2.515 |
| Call Number |
UA @ lucian @ c:irua:96549 |
Serial |
841 |
| Permanent link to this record |
| |
|
| |
| Author |
Liu, Y.-X.; Zhang, Q.-Z.; Liu, L.; Song, Y.-H.; Bogaerts, A.; Wang, Y.-N. |
| Title |
Electron bounce resonance heating in dual-frequency capacitively coupled oxygen discharges |
Type |
A1 Journal article |
| Year |
2013 |
Publication |
Plasma sources science and technology |
Abbreviated Journal |
Plasma Sources Sci T |
| Volume |
22 |
Issue |
2 |
Pages |
025012-11 |
| Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
| Abstract |
The electron bounce resonance heating (BRH) in dual-frequency capacitively coupled plasmas operated in oxygen is studied by different experimental methods and a particle-in-cell/Monte Carlo collision (PIC/MCC) simulation, and compared with the electropositive argon discharge. In comparison with argon, the experimental results show that in an oxygen discharge the resonance peaks in positive-ion density and light intensity tend to occur at larger electrode gaps. Moreover, at electrode gaps L > 2.5 cm, the positive-ion (and electron) density and the light emission drop monotonically in the oxygen discharge upon increasing L, whereas they rise (after an initial drop) in the argon case. At resonance gap the electronegativity reaches its maximum due to the BRH. All these experimental observations are explained by PIC/MCC simulations, which show that in the oxygen discharge the bulk electric field becomes quite strong and is out of phase with the sheath field. Therefore, it retards the resonance electrons when traversing the bulk, resulting in a suppressed BRH. Both experiment and simulation results show that this effect becomes more pronounced at lower high-frequency power, when the discharge mode changes from electropositive to electronegative. In a pure oxygen discharge, the BRH is suppressed with increasing pressure and almost diminishes at 12 Pa. Finally, the driving frequency significantly affects the BRH, because it determines the phase relation between bulk electric field and sheath electric field. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
Institute of Physics |
Place of Publication |
Bristol |
Editor |
|
| Language |
|
Wos |
000317275400014 |
Publication Date |
2013-03-18 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0963-0252;1361-6595; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.302 |
Times cited |
20 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 3.302; 2013 IF: 3.056 |
| Call Number |
UA @ lucian @ c:irua:106534 |
Serial |
911 |
| Permanent link to this record |
| |
|
| |
| Author |
Yan, M.; Bogaerts, A.; Goedheer, W.J.; Gijbels, R. |
| Title |
Electron energy distribution function in capacitively coupled RF discharges: differences between electropositive Ar and electronegative SiH4 discharges |
Type |
A1 Journal article |
| Year |
2000 |
Publication |
Plasma sources science and technology |
Abbreviated Journal |
Plasma Sources Sci T |
| Volume |
9 |
Issue |
|
Pages |
583-591 |
| Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
| Abstract |
|
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
Institute of Physics |
Place of Publication |
Bristol |
Editor |
|
| Language |
|
Wos |
000165341000015 |
Publication Date |
2002-08-25 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0963-0252;1361-6595; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.302 |
Times cited |
21 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 3.302; 2000 IF: 1.963 |
| Call Number |
UA @ lucian @ c:irua:34071 |
Serial |
929 |
| Permanent link to this record |
| |
|
| |
| Author |
Van Laer, K.; Tinck, S.; Samara, V.; de Marneffe, J.F.; Bogaerts, A. |
| Title |
Etching of low-k materials for microelectronics applications by means of a N2/H2 plasma : modeling and experimental investigation |
Type |
A1 Journal article |
| Year |
2013 |
Publication |
Plasma sources science and technology |
Abbreviated Journal |
Plasma Sources Sci T |
| Volume |
22 |
Issue |
2 |
Pages |
025011-25019 |
| Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
| Abstract |
In this paper, we investigate the etch process of so-called low-k organic material by means of a N2/H2 capacitively coupled plasma, as applied in the micro-electronics industry for the manufacturing of computer chips. In recent years, such an organic material has emerged as a possible alternative for replacing bulk SiO2 as a dielectric material in the back-end-of-line, because of the smaller parasitic capacity between adjacent conducting lines, and thus a faster propagation of the electrical signals throughout the chip. Numerical simulations with a hybrid plasma model, using an extensive plasma and surface chemistry set, as well as experiments are performed, focusing on the plasma properties as well as the actual etching process, to obtain a better insight into the underlying mechanisms. Furthermore, the effects of gas pressure, applied power and gas composition are investigated to try to optimize the etch process. In general, the plasma density reaches a maximum near the wafer edge due to the so-called 'edge effect'. As a result, the etch rate is not uniform but will also reach its maximum near the wafer edge. The pressure seems not to have a big effect. A higher power increases the etch rate, but the uniformity becomes (slightly) worse. The gas mixing ratio has no significant effect on the etch process, except when a pure H2 or N2 plasma is used, illustrating the synergistic effects of a N2/H2 plasma. In fact, our calculations reveal that the N2/H2 plasma entails an ion-enhanced etch process. The simulation results are in reasonable agreement with the experimental values. The microscopic etch profile shows the desired anisotropic shape under all conditions under study. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
Institute of Physics |
Place of Publication |
Bristol |
Editor |
|
| Language |
|
Wos |
000317275400013 |
Publication Date |
2013-03-18 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0963-0252;1361-6595; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.302 |
Times cited |
13 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 3.302; 2013 IF: 3.056 |
| Call Number |
UA @ lucian @ c:irua:106654 |
Serial |
1084 |
| Permanent link to this record |
| |
|
| |
| Author |
Kozák, T.; Bogaerts, A. |
| Title |
Evaluation of the energy efficiency of CO2 conversion in microwave discharges using a reaction kinetics model |
Type |
A1 Journal article |
| Year |
2015 |
Publication |
Plasma sources science and technology |
Abbreviated Journal |
Plasma Sources Sci T |
| Volume |
24 |
Issue |
24 |
Pages |
015024 |
| Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
| Abstract |
We use a zero-dimensional reaction kinetics model to simulate CO2 conversion in microwave discharges where the excitation of the vibrational levels plays a significant role in the dissociation kinetics. The model includes a description of the CO2 vibrational kinetics, taking into account state-specific VT and VV relaxation reactions and the effect of vibrational excitation on other chemical reactions. The model is used to simulate a general tubular microwave reactor, where a stream of CO2 flows through a plasma column generated by microwave radiation. We study the effects of the internal plasma parameters, namely the reduced electric field, electron density and the total specific energy input, on the CO2 conversion and its energy efficiency. We report the highest energy efficiency (up to 30%) for a specific energy input in the range 0.41.0 eV/molecule and a reduced electric field in the range 50100 Td and for high values of the electron density (an ionization degree greater than 10−5). The energy efficiency is mainly limited by the VT relaxation which contributes dominantly to the vibrational energy losses and also contributes significantly to the heating of the reacting gas. The model analysis provides useful insight into the potential and limitations of CO2 conversion in microwave discharges. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
Institute of Physics |
Place of Publication |
Bristol |
Editor |
|
| Language |
|
Wos |
000348298200025 |
Publication Date |
2014-12-23 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0963-0252;1361-6595; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.302 |
Times cited |
100 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 3.302; 2015 IF: 3.591 |
| Call Number |
c:irua:122243 |
Serial |
1087 |
| Permanent link to this record |
