| Records |
| Author |
Maheshi, D.; Van Passel, S.; Van Karel, A. |
| Title |
Environmental and economic assessment of 'open waste dump' mining in Sri Lanka |
Type |
A1 Journal article |
| Year |
2015 |
Publication |
Resources Conservation And Recycling |
Abbreviated Journal |
Resour Conserv Recy |
| Volume |
102 |
Issue |
|
Pages |
67-79 |
| Keywords |
A1 Journal article; Engineering Management (ENM) |
| Abstract |
Open waste dumps in Sri Lanka generate adverse environmental and socio-economic impacts due to inadequate maintenance. In this study, a concept of 'open waste dump mining' is suggested in order to minimise the environmental and socio-economic impacts, together with resource recovery. A model based on life cycle assessment and life cycle costing has been used to assess the environmental and economic feasibility of the suggested open waste dump mining concept. Two scenarios have been defined for a hypothetical case, dependent on the destination of the refuse derived fuel fraction. Scenario 1 comprises direct selling of refuse derived fuel as an alternative fuel to replace coal usage in the cement industry, while Scenario 2 consists of thermal treatment of refuse derived fuel with the objective of producing electricity. The study shows that both scenarios are beneficial from an environmental point of view, but not from an economic view point. However, economic profits can be obtained by adjusting waste transport distances and the price of electricity. The environmental analysis further reveals that the higher global warming potential of open waste dumps can be eliminated to a large extent by applying suggested mining and waste valorisation scenarios. (C) 2015 Elsevier B.V. All rights reserved. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
000362147800008 |
Publication Date |
2015-07-24 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0921-3449 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor  |
3.313 |
Times cited |
26 |
Open Access |
|
| Notes |
; ; |
Approved |
Most recent IF: 3.313; 2015 IF: 2.564 |
| Call Number |
UA @ admin @ c:irua:128753 |
Serial |
6196 |
| Permanent link to this record |
| |
|
| |
| Author |
Lizin, S.; Van Dael, M.; Van Passel, S.; Van Dael, M. |
| Title |
Battery pack recycling : behaviour change interventions derived from an integrative theory of planned behaviour study |
Type |
A1 Journal article |
| Year |
2017 |
Publication |
Resources Conservation And Recycling |
Abbreviated Journal |
Resour Conserv Recy |
| Volume |
122 |
Issue |
|
Pages |
66-82 |
| Keywords |
A1 Journal article; Economics; Engineering Management (ENM) |
| Abstract |
Belgium has passed the 45% cap, mandated by the European Union, by achieving a collection rate of over 50% in 2012. Having such a collection rate, Belgium is amongst the frontrunners in battery recycling in Europe. However, despite the efforts, about 40% of used batteries are still not properly collected. Particularly troublesome according to the national producer responsibility organization are the battery packs. In this paper we therefore investigate the drivers and barriers to battery pack drop-off intention perceived by Belgian households using an integrative model based on the Theory of Planned Behaviour. An R2 of 0.64 was found, which according to the literature on partial least squares structural equation modelling signals a moderate yet very close to substantial coefficient of determination. We find that on average perceived behavioural control and moral norms have the largest influence on the intention to drop-off used battery packs as quickly as possible. Based on the insights gained, recommendations are made for both behaviour change interventions and future research. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
000401881300007 |
Publication Date |
2017-02-15 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0921-3449 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles; WoS full record; WoS citing articles |
| Impact Factor |
3.313 |
Times cited |
21 |
Open Access |
|
| Notes |
; The corresponding author wishes to thank the Research Foundation Flanders (FWO) for granting him a postdoctoral grant [grant number: 12G5415N]. Furthermore, the second author wishes to express her gratitude for funding her to the SUMMA policy platform. Furthermore, we wish to express our sincere gratitude to Peter Coonen and Nele Peeters of Bebat for their time and willingness to share information with us. ; |
Approved |
Most recent IF: 3.313 |
| Call Number |
UA @ admin @ c:irua:140681 |
Serial |
6159 |
| Permanent link to this record |
| |
|
| |
| Author |
Hoogmartens, R.; Eyckmans, J.; Van Passel, S. |
| Title |
A Hotelling model for the circular economy including recycling, substitution and waste accumulation |
Type |
A1 Journal article |
| Year |
2018 |
Publication |
Resources Conservation And Recycling |
Abbreviated Journal |
Resour Conserv Recy |
| Volume |
128 |
Issue |
128 |
Pages |
98-109 |
| Keywords |
A1 Journal article; Engineering Management (ENM) |
| Abstract |
Non-renewable resources include a large variety of deposits that have been formed by geological processes over millions of years. Although extraction of such resources provides benefits as employment and economic revenues, it also contributes to negative environmental externalities and it increases resource scarcity. An important policy question is how to optimally extract non-renewable resource stocks over time while taking possible substitutes and recycling into account. The present paper adds to the literature by developing a generic numerical optimisation model that can be used to simulate non-renewable resource management regimes and the effects of different policy instruments deployed at different stages of the resource's life cycle. By including recycling and substitution, the model extends the seminal cake-eating Hotelling model that dominates the non-renewable resource economics literature. In addition to being generically designed, the model can accommodate for non-competitive market settings, interacting policy instruments and environmental externalities at different stages of the material's life cycle. The model's possibilities are illustrated by means of a numerical simulation example for the extraction of sand. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
000417658500013 |
Publication Date |
2017-10-12 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0921-3449 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles; WoS full record; WoS citing articles |
| Impact Factor |
3.313 |
Times cited |
5 |
Open Access |
|
| Notes |
; ; |
Approved |
Most recent IF: 3.313 |
| Call Number |
UA @ admin @ c:irua:148496 |
Serial |
6142 |
| Permanent link to this record |
| |
|
| |
| Author |
Larraín, M.; Van Passel, S.; Thomassen, G.; Van Gorp, B.; Nhu, T.T.; Huysveld, S.; Van Geem, K.M.; De Meester, S.; Billen, P. |
| Title |
Techno-economic assessment of mechanical recycling of challenging post-consumer plastic packaging waste |
Type |
A1 Journal article |
| Year |
2021 |
Publication |
Resources Conservation And Recycling |
Abbreviated Journal |
Resour Conserv Recy |
| Volume |
170 |
Issue |
|
Pages |
105607 |
| Keywords |
A1 Journal article; Economics; Engineering sciences. Technology; Engineering Management (ENM); Intelligence in PRocesses, Advanced Catalysts and Solvents (iPRACS) |
| Abstract |
Increasing plastic recycling rates is crucial to tackle plastic pollution and reduce consumption of fossil resources. Recycling routes for post-consumer plastic fractions that are technologically and economically feasible remain a challenge. Profitable value chains for recycling mixed film and tray-like plastics have hardly been implemented today, in sharp contrast to recycling of relatively pure fractions such as polyethylene terephthalate and high-density polyethylene bottles. This study examines the economic feasibility of implementing mechanical recycling for plastic waste such as polypropylene, polystyrene, polyethylene films and mixed polyolefins. In most European countries these plastic fractions are usually incinerated or landfilled whilst in fact technologies exist to mechanically recycle them into regranulates or regrinds. Results show that the economic incentives for the recycling of plastic packaging depend predominantly on the product price and product yield. At current price levels, the most profitable plastic fraction to be recycled is PS rigids, with an internal rate of return of 14%, whereas the least profitable feed is a mixed polyolefin fraction with a negative internal rate of return in a scenario with steadily rising oil prices. Moreover, these values would be substantially reduced if oil prices, and therefore plastic product prices decrease. Considering a discount rate of 15% for a 15-year period, mechanical recycling is not profitable if no policy changes would be imposed by governments. Clearly low oil prices may jeopardize the mechanical recycling industry, inducing the need for policies that would increase the demand of recycled products such as imposing minimal recycled content targets. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
000667309200042 |
Publication Date |
2021-04-20 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0921-3449 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.313 |
Times cited |
|
Open Access |
OpenAccess |
| Notes |
|
Approved |
Most recent IF: 3.313 |
| Call Number |
UA @ admin @ c:irua:177325 |
Serial |
6946 |
| Permanent link to this record |
| |
|
| |
| Author |
Navare, K.; Muys, B.; Vrancken, K.C.; Van Acker, K. |
| Title |
Circular economy monitoring – How to make it apt for biological cycles? |
Type |
A1 Journal article |
| Year |
2021 |
Publication |
Resources Conservation And Recycling |
Abbreviated Journal |
Resour Conserv Recy |
| Volume |
170 |
Issue |
|
Pages |
105563 |
| Keywords |
A1 Journal article; Sustainable Energy, Air and Water Technology (DuEL) |
| Abstract |
Circular economy (CE) principles distinguish between technical and biological cycles. Technical cycles involve the management of stocks of non-renewable abiotic resources that cannot be appropriately returned to the biosphere, whereas, biological cycles involve the flows of renewable biotic resources that can safely cycle in and out of the biosphere. Despite this distinction, existing CE monitors are typically developed for technical cycles, and focus mainly on the extent to which resources are looped back in the technosphere. These monitors seem less apt to assess the circularity of biological cycles. This study aims to identify this gap by critically reviewing the CE monitoring criteria and CE assessment tools, and evaluate if they include the four key characteristics of biological cycles. Firstly, biotic resources, although renewable, require to be harvested sustainably. Secondly, while abiotic resources can be restored and recycled to their original quality, biotic resources degrade in quality with every subsequent use and are, hence, cascaded in use. Thirdly, biotic resources should safely return as nutrients to the biosphere to support the regeneration of ecosystems. Fourthly, biological cycles have environmental impacts due to resource extraction, resulting from land-use and resource-depletion and biogenic carbon flows. The CE monitoring criteria lack in thoroughly assessing these characteristics. With the growing demand for biotic resources, the gap in the assessment could exacerbate the overexploitation of natural resources and cause the degradation of ecosystems. The study discusses measures to bridge this gap and suggests ways to design a CE assessment framework that is also apt for biological cycles. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
000667309200009 |
Publication Date |
2021-03-31 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0921-3449 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.313 |
Times cited |
|
Open Access |
Not_Open_Access |
| Notes |
|
Approved |
Most recent IF: 3.313 |
| Call Number |
UA @ admin @ c:irua:191685 |
Serial |
7666 |
| Permanent link to this record |
| |
|
| |
| Author |
Parchomenko, A.; Nelen, D.; Gillabel, J.; Vrancken, K.C.M.; Rechberger, H. |
| Title |
Resource effectiveness of the European automotive sector : a statistical entropy analysis over time |
Type |
A1 Journal article |
| Year |
2021 |
Publication |
Resources Conservation And Recycling |
Abbreviated Journal |
Resour Conserv Recy |
| Volume |
169 |
Issue |
|
Pages |
105558 |
| Keywords |
A1 Journal article; Sustainable Energy, Air and Water Technology (DuEL) |
| Abstract |
The European automotive sector is faced with potentially disruptive challenges. In particular, the projected increase in the share of electric vehicles (EVs) and calls to prepare for the implementation of more circular economy (CE) strategies are increasingly demanding systemic adaptations. Given the goals of the CE, the adaptations should enable a maximal preservation of the function and value of products (e.g. extension of lifetime), components (e.g. reuse of parts) and materials (e.g., material recycling), thus saving on the energy, materials and effort that would be required to restore the lost functionalities. In this context, statistical entropy analysis (SEA) is proposed as a methodology to assess the effort needed for preserving and restoring functionality at different product, component and material life cycle stages. Effort is measured as changes in statistical entropy that are caused by concentration and dilution activities in the production – consumption – End-of-Life (EoL) system. SEA was applied to a generic model of the European automotive system, in combination with a stock-driven model and a material flow analysis (MFA), allowing statistical entropy changes to be projected over time. The paper demonstrates how SEA can facilitate decision making on the transition towards a more circular economy by quantifying the effects of particular CE strategies and their combinations. The results show that without any additional system adaptations, an increasing share of EVs towards the year 2050 will lead to substantially increased effort in production as well as end-of-life vehicle treatment. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
000657320800074 |
Publication Date |
2021-03-18 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0921-3449 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.313 |
Times cited |
|
Open Access |
OpenAccess |
| Notes |
|
Approved |
Most recent IF: 3.313 |
| Call Number |
UA @ admin @ c:irua:179770 |
Serial |
8475 |
| Permanent link to this record |
| |
|
| |
| Author |
Khaydarov, R.T.; Beisinbaeva, H.B.; Sabitov, M.M.; Kalal, M.; Berdiyorov, G.R. |
| Title |
Conditions defining the mechanisms of the formation of light gas ions in multicomponent laser-produced plasmas |
Type |
A1 Journal article |
| Year |
2010 |
Publication |
Nuclear fusion |
Abbreviated Journal |
Nucl Fusion |
| Volume |
50 |
Issue |
10 |
Pages |
105007,1-105007,4 |
| Keywords |
A1 Journal article; Condensed Matter Theory (CMT) |
| Abstract |
Using the mass-spectrometric method we study the charge, energy and spatial characteristics of ions in multicomponent plasma, generated under the action of Nd : YAG laser radiation on the surface of solid targets. We focus on the effect of the entry form of light gas atoms on the parameters of ions in such laser-produced plasmas. We found that the presence of light gas atoms considerably affects the parameters (e.g. the intensity and the charge multiplicity) of the heavier ions. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
Vienna |
Editor |
|
| Language |
|
Wos |
000281859300008 |
Publication Date |
2010-08-21 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0029-5515;1741-4326; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.307 |
Times cited |
1 |
Open Access |
|
| Notes |
; ; |
Approved |
Most recent IF: 3.307; 2010 IF: 3.303 |
| Call Number |
UA @ lucian @ c:irua:84876 |
Serial |
476 |
| Permanent link to this record |
| |
|
| |
| Author |
Khaydarov, R.T.; Beisinbaeva, H.B.; Sabitov, M.M.; Kalal, M.; Berdiyorov, G.R. |
| Title |
Effect of light gas atom inclusions on the characteristics of laser-produced plasma ions |
Type |
A1 Journal article |
| Year |
2011 |
Publication |
Nuclear fusion |
Abbreviated Journal |
Nucl Fusion |
| Volume |
51 |
Issue |
10 |
Pages |
103041,1-103041,3 |
| Keywords |
A1 Journal article; Condensed Matter Theory (CMT) |
| Abstract |
Using the mass-spectrometric method we studied the effect of light gas inclusions on the formation process of multi-component laser-induced plasma ions. Masscharge characteristics, as well as energy and spatial distribution of the plasma ions are analysed. We found that both the energy and maximal charge of heavy component ions decrease due to the presence of gas atoms in the solid target surface layer. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
Vienna |
Editor |
|
| Language |
|
Wos |
000296603800043 |
Publication Date |
2011-09-23 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0029-5515;1741-4326; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.307 |
Times cited |
1 |
Open Access |
|
| Notes |
; ; |
Approved |
Most recent IF: 3.307; 2011 IF: 4.090 |
| Call Number |
UA @ lucian @ c:irua:93761 |
Serial |
821 |
| Permanent link to this record |
| |
|
| |
| Author |
Khaydarov, R.T.; Beisinbaeva, H.B.; Sabitov, N.M.; Terentev, V.B.; Berdiyorov, G.R. |
| Title |
Effect of neutron irradiation on the characteristics of laser-produced plasma |
Type |
A1 Journal article |
| Year |
2010 |
Publication |
Nuclear fusion |
Abbreviated Journal |
Nucl Fusion |
| Volume |
50 |
Issue |
2 |
Pages |
025024,1-025024,5 |
| Keywords |
A1 Journal article; Condensed Matter Theory (CMT) |
| Abstract |
Using the mass-spectrometric method we studied the formation of multi-charged plasma ions during the interaction of laser radiation with solid targets irradiated by neutron beams. We found that structural defects, caused by the neutron irradiation, influence not only the efficiency of the process of material evaporation and emission of plasma, but also the ionization and recombination processes taking place at the initial stage of plasma formation and expansion. We also show the effect of the dose of neutron irradiation on the threshold of plasma formation from the surface of the target. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
Vienna |
Editor |
|
| Language |
|
Wos |
000275322200029 |
Publication Date |
2010-01-27 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0029-5515;1741-4326; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.307 |
Times cited |
3 |
Open Access |
|
| Notes |
; This work was supported by MINVIZ Uzbekistan and by IAEA (No 13738). G. R. B acknowledges support from FWO-Vlaanderen. ; |
Approved |
Most recent IF: 3.307; 2010 IF: 3.303 |
| Call Number |
UA @ lucian @ c:irua:81769 |
Serial |
825 |
| Permanent link to this record |
| |
|
| |
| Author |
Meert, K.W.; Morozov, V.A.; Abakumov, A.M.; Hadermann, J.; Poelman, D.; Smet, P.F. |
| Title |
Energy transfer in Eu3+ doped scheelites : use as thermographic phosphor |
Type |
A1 Journal article |
| Year |
2014 |
Publication |
Optics express |
Abbreviated Journal |
Opt Express |
| Volume |
22 |
Issue |
9 |
Pages |
A961-A972 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
In this paper the luminescence of the scheelite-based CaGd2(1-x)Eu2x(WO4)4 solid solutions is investigated as a function of the Eu content and temperature. All phosphors show intense red luminescence due to the 5D0 7F2 transition in Eu3+, along with other transitions from the 5D1 and 5D0 excited states. For high Eu3+ concentrations the intensity ratio of the emission originating from the 5D1 and 5D0 levels has a non-conventional temperature dependence, which could be explained by a phonon-assisted cross-relaxation process. It is demonstrated that this intensity ratio can be used as a measure of temperature with high spatial resolution, allowing the use of these scheelites as thermographic phosphor. The main disadvantage of many thermographic phosphors, a decreasing signal for increasing temperature, is absent. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
000335905300037 |
Publication Date |
2014-04-22 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
1094-4087; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.307 |
Times cited |
47 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 3.307; 2014 IF: 3.488 |
| Call Number |
UA @ lucian @ c:irua:117067 |
Serial |
1044 |
| Permanent link to this record |
| |
|
| |
| Author |
Roose, D.; Leroux, F.; de Vocht, N.; Guglielmetti, C.; Pintelon, I.; Adriaensen, D.; Ponsaerts, P.; van der Linden, A.-M.; Bals, S. |
| Title |
Multimodal imaging of micron-sized iron oxide particles following in vitro and in vivo uptake by stem cells: down to the nanometer scale |
Type |
A1 Journal article |
| Year |
2014 |
Publication |
Contrast media and molecular imaging |
Abbreviated Journal |
Contrast Media Mol I |
| Volume |
9 |
Issue |
6 |
Pages |
400-408 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT); Bio-Imaging lab |
| Abstract |
In this study, the interaction between cells and micron-sized paramagnetic iron oxide (MPIO) particles was investigated by characterizing MPIO in their original state, and after cellular uptake in vitro as well as in vivo. Moreover, MPIO in the olfactory bulb were studied 9months after injection. Using various imaging techniques, cell-MPIO interactions were investigated with increasing spatial resolution. Live cell confocal microscopy demonstrated that MPIO co-localize with lysosomes after in vitro cellular uptake. In more detail, a membrane surrounding the MPIO was observed by high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM). Following MPIO uptake in vivo, the same cell-MPIO interaction was observed by HAADF-STEM in the subventricular zone at 1week and in the olfactory bulb at 9months after MPIO injection. These findings provide proof for the current hypothesis that MPIO are internalized by the cell through endocytosis. The results also show MPIO are not biodegradable, even after 9months in the brain. Moreover, they show the possibility of HAADF-STEM generating information on the labeled cell as well as on the MPIO. In summary, the methodology presented here provides a systematic route to investigate the interaction between cells and nanoparticles from the micrometer level down to the nanometer level and beyond. Copyright (c) 2014 John Wiley Sons, Ltd. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
S.l. |
Editor |
|
| Language |
|
Wos |
000346172100001 |
Publication Date |
2014-04-24 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
1555-4309; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.307 |
Times cited |
5 |
Open Access |
Not_Open_Access |
| Notes |
; The authors would like to thank Sofie Thys for her technical support. The UltraVIEW VoX spinning disk confocal microscope was purchased with support of the Hercules Foundation (Hercules Type 1: AUHA 09/001 and AUHA 11/01). The authors also appreciate financial support from the European Union under the Seventh Framework Program (Integrated Infrastructure Initiative no. 262348 European Soft Matter Infrastructure, ESMI), the Fund for Scientific Research- Flanders and the Flemish Institute for Science and Technology and the Belgian government through the Interuniversity Attraction Pole Program (IAP- PAI). ; |
Approved |
Most recent IF: 3.307; 2014 IF: 2.923 |
| Call Number |
UA @ lucian @ c:irua:122750 |
Serial |
2222 |
| Permanent link to this record |
| |
|
| |
| Author |
Tikhomirov, V.K.; Rodriguez, V.D.; Kutznetsov, D.; Kirilenko, D.; Van Tendeloo, G.; Moshchalkov, V.V. |
| Title |
Preparation and luminescence of bulk oxyfluoride glasses doped with Ag nanoclusters |
Type |
A1 Journal article |
| Year |
2010 |
Publication |
Optics express |
Abbreviated Journal |
Opt Express |
| Volume |
18 |
Issue |
21 |
Pages |
22032-22040 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
Bulk oxyfluoride glasses doped with Ag nanoclusters have been prepared using the melt quenching technique. When pumped in the absorption band of Ag nanoclusters between 300 to 500 nm, these glasses emit a very broad luminescence band covering all the visible range with a weak tail extending into the near infrared. The maximum of the luminescence band and its color shifts to the blue with a shortening of the excitation wavelength and an increasing ratio of oxide to fluoride components, resulting in white color luminescence at a particular ratio of oxide to fluoride; with a quantum yield above 20%. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
000283686500057 |
Publication Date |
2010-10-04 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
1094-4087; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.307 |
Times cited |
74 |
Open Access |
|
| Notes |
Methusalem |
Approved |
Most recent IF: 3.307; 2010 IF: 3.753 |
| Call Number |
UA @ lucian @ c:irua:85802 |
Serial |
2698 |
| Permanent link to this record |
| |
|
| |
| Author |
Shestakov, M.V.; Tikhomirov, V.K.; Kirilenko, D.; Kuznetsov, A.S.; Chibotaru, L.F.; Baranov, A.N.; Van Tendeloo, G.; Moshchalkov, V.V. |
| Title |
Quantum cutting in Li (770 nm) and Yb (1000 nm) co-dopant emission bands by energy transfer from the ZnO nano-crystalline host |
Type |
A1 Journal article |
| Year |
2011 |
Publication |
Optics express |
Abbreviated Journal |
Opt Express |
| Volume |
19 |
Issue |
17 |
Pages |
15955-15964 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
Li-Yb co-doped nano-crystalline ZnO has been synthesized by a method of thermal growth from the salt mixtures. X-ray diffraction, transmission electron microscopy, atomic absorption spectroscopy and optical spectroscopy confirm the doping and indicate that the dopants may form Li-Li and Yb3+-Li based nanoclusters. When pumped into the conduction and exciton absorption bands of ZnO between 250 to 425 nm, broad emission bands of about 100 nm half-height-width are excited around 770 and 1000 nm, due to Li and Yb dopants, respectively. These emission bands are activated by energy transfer from the ZnO host mostly by quantum cutting processes, which generate pairs of quanta in Li (770 nm) and Yb (1000 nm) emission bands, respectively, out of one quantum absorbed by the ZnO host. These quantum cutting phenomena have great potential for application in the down-conversion layers coupled to the Si solar cells. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
000293894900033 |
Publication Date |
2011-08-04 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
1094-4087; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.307 |
Times cited |
19 |
Open Access |
|
| Notes |
FWO; Methusalem |
Approved |
Most recent IF: 3.307; 2011 IF: 3.587 |
| Call Number |
UA @ lucian @ c:irua:92428 |
Serial |
2776 |
| Permanent link to this record |
| |
|
| |
| Author |
Van Aert, S.; van Dyck, D.; den Dekker, A.J. |
| Title |
Resolution of coherent and incoherent imaging systems reconsidered: classical criteria and a statistical alternative |
Type |
A1 Journal article |
| Year |
2006 |
Publication |
Optics express |
Abbreviated Journal |
Opt Express |
| Volume |
14 |
Issue |
9 |
Pages |
3830-3839 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab |
| Abstract |
|
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
000237296200013 |
Publication Date |
2006-05-04 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
1094-4087; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.307 |
Times cited |
45 |
Open Access |
|
| Notes |
Fwo |
Approved |
Most recent IF: 3.307; 2006 IF: 4.009 |
| Call Number |
UA @ lucian @ c:irua:58262 |
Serial |
2883 |
| Permanent link to this record |
| |
|
| |
| Author |
Roose, D.; Leroux, F.; De Vocht, N.; Guglielmetti, C.; Pintelon, I.; Adriaensen, D.; Ponsaerts, P.; Van der Linden, A.; Bals, S. |
| Title |
Multimodal imaging of micron-sized iron oxide particles following in vitro and in vivo uptake by stem cells: down to the nanometer scale |
Type |
A1 Journal article |
| Year |
2014 |
Publication |
Contrast Media & Molecular Imaging |
Abbreviated Journal |
Contrast Media Mol I |
| Volume |
9 |
Issue |
6 |
Pages |
400-408 |
| Keywords |
A1 Journal article; Electron Microscopy for Materials Science (EMAT); |
| Abstract |
In this study, the interaction between cells and micron-sized paramagnetic iron oxide (MPIO) particles was investigated by characterizing MPIO in their original state, and after cellular uptake in vitro as well as in vivo. Moreover, MPIO in the olfactory bulb were studied 9 months after injection. Using various imaging techniques, cell-MPIO interactions were investigated with increasing spatial resolution. Live cell confocal microscopy demonstrated that MPIO co-localize with lysosomes after in vitro cellular uptake. In more detail, a membrane surrounding the MPIO was observed by high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM). Following MPIO uptake in vivo, the same cell-MPIO interaction was observed by HAADF-STEM in the subventricular zone at 1 week and in the olfactory bulb at 9 months after MPIO injection. These findings provide proof for the current hypothesis that MPIO are internalized by the cell through endocytosis. The results also show MPIO are not biodegradable, even after 9 months in the brain. Moreover, they show the possibility of HAADF-STEM generating information on the labeled cell as well as on the MPIO. In summary, the methodology presented here provides a systematic route to investigate the interaction between cells and nanoparticles from the micrometer level down to the nanometer level and beyond. |
| Address |
EMAT, University of Antwerp, Antwerp, Belgium; Bio-Imaging Lab, University of Antwerp, Antwerp, Belgium; Laboratory of Experimental Hematology, University of Antwerp, Antwerp, Belgium |
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
English |
Wos |
000346172100002 |
Publication Date |
2014-04-22 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
1555-4309; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.307 |
Times cited |
8 |
Open Access |
Not_Open_Access |
| Notes |
IAP-PAI; 262348 ESMI; Hercules Type 1: AUHA 09/001 and AUHA 11/01 |
Approved |
Most recent IF: 3.307; 2014 IF: 2.923 |
| Call Number |
UA @ lucian @ |
Serial |
3938 |
| Permanent link to this record |
| |
|
| |
| Author |
Mayer, J.A.; Offermans, T.; Chrapa, M.; Pfannmöller, M.; Bals, S.; Ferrini, R.; Nisato, G. |
| Title |
Optical enhancement of a printed organic tandem solar cell using diffractive nanostructures |
Type |
A1 Journal article |
| Year |
2018 |
Publication |
Optics express |
Abbreviated Journal |
Opt Express |
| Volume |
26 |
Issue |
26 |
Pages |
A240 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
Solution processable organic tandem solar cells offer a promising approach to achieve cost-effective, lightweight and flexible photovoltaics. In order to further enhance the efficiency of optimized organic tandem cells, diffractive light-management nanostructures were designed for an optimal redistribution of the light as function of both wavelength and propagation angles in both sub-cells. As the fabrication of these optical structures is compatible with roll-to-roll production techniques such as hot-embossing or UV NIL imprinting, they present an optimal cost-effective solution for printed photovoltaics. Tandem cells with power conversion efficiencies of 8-10% were fabricated in the ambient atmosphere by doctor blade coating, selected to approximate the conditions during roll-to-roll manufacturing. Application of the light management structure onto an 8.7% efficient encapsulated tandem cell boosted the conversion efficiency of the cell to 9.5%. (C) 2018 Optical Society of America under the terms of the OSA Open Access Publishing Agreement |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
000427900400003 |
Publication Date |
2018-02-26 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
1094-4087 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.307 |
Times cited |
9 |
Open Access |
OpenAccess |
| Notes |
; FP7 European collaborative project SUNFLOWER (FP7-ICT-2011-7, grant number 287594); German Federal Ministry of Education and Research (BMBF) (03xEK3504, project TAURUS); FP7 European project ESTEEM2 (grant number 312483); HEiKA centre FunTECH-3D. ; |
Approved |
Most recent IF: 3.307 |
| Call Number |
UA @ lucian @ c:irua:150839UA @ admin @ c:irua:150839 |
Serial |
4975 |
| Permanent link to this record |
| |
|
| |
| Author |
Dong, H.M.; Xu, W.; Peeters, F.M. |
| Title |
Electrical generation of terahertz blackbody radiation from graphene |
Type |
A1 Journal article |
| Year |
2018 |
Publication |
Optics express |
Abbreviated Journal |
Opt Express |
| Volume |
26 |
Issue |
19 |
Pages |
24621-24626 |
| Keywords |
A1 Journal article; Condensed Matter Theory (CMT) |
| Abstract |
Recent experimental work on the application of graphene for novel illumination motivated us to present a theoretical study of the blackbody radiation emission from a freely suspended graphene driven by a dc electric field. Strong terahertz (THz) emission, with intensity up to mW/cm(2), can be generated with increasing electric field strength due to the heating of electrons in graphene. We show that the intensity of the THz emission generated electrically from graphene depends rather sensitively on the lattice temperature in relatively weak electric fields, whereas it is less sensitive to the lattice temperature in relative strong electric fields. Our study highlights the practical application of graphene as intense THz source where the radiation is generated electrically. (C) 2018 Optical Society of America under the terms of the OSA Open Access Publishing Agreement |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
000444705000026 |
Publication Date |
2018-09-05 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
1094-4087 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.307 |
Times cited |
14 |
Open Access |
|
| Notes |
; National Natural Science Foundation of China (NSFC) (11604380, 11574319); Center of Science and Technology of Hefei Academy of Science (2016FXZY002); Department of Science and Technology of Yunnan Province (2016FC001). ; |
Approved |
Most recent IF: 3.307 |
| Call Number |
UA @ lucian @ c:irua:153632UA @ admin @ c:irua:153632 |
Serial |
5095 |
| Permanent link to this record |
| |
|
| |
| Author |
Prabhakara, V.; Nuytten, T.; Bender, H.; Vandervorst, W.; Bals, S.; Verbeeck, J. |
| Title |
Linearized radially polarized light for improved precision in strain measurements using micro-Raman spectroscopy |
Type |
A1 Journal article |
| Year |
2021 |
Publication |
Optics Express |
Abbreviated Journal |
Opt Express |
| Volume |
29 |
Issue |
21 |
Pages |
34531 |
| Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| Abstract |
Strain engineering in semiconductor transistor devices has become vital in the semiconductor industry due to the ever-increasing need for performance enhancement at the nanoscale. Raman spectroscopy is a non-invasive measurement technique with high sensitivity to mechanical stress that does not require any special sample preparation procedures in comparison to characterization involving transmission electron microscopy (TEM), making it suitable for inline strain measurement in the semiconductor industry. Indeed, at present, strain measurements using Raman spectroscopy are already routinely carried out in semiconductor devices as it is cost effective, fast and non-destructive. In this paper we explore the usage of linearized radially polarized light as an excitation source, which does provide significantly enhanced accuracy and precision as compared to linearly polarized light for this application. Numerical simulations are done to quantitatively evaluate the electric field intensities that contribute to this enhanced sensitivity. We benchmark the experimental results against TEM diffraction-based techniques like nano-beam diffraction and Bessel diffraction. Differences between both approaches are assigned to strain relaxation due to sample thinning required in TEM setups, demonstrating the benefit of Raman for nondestructive inline testing. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
|
Place of Publication |
|
Editor |
|
| Language |
|
Wos |
000708940500144 |
Publication Date |
2021-10-11 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
1094-4087 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.307 |
Times cited |
2 |
Open Access |
OpenAccess |
| Notes |
Horizon 2020 Framework Programme, 823717 – ESTEEM3 ; GOA project, “Solarpaint” ; Herculesstichting;; esteem3jra; esteem3reported; |
Approved |
Most recent IF: 3.307 |
| Call Number |
EMAT @ emat @c:irua:182472 |
Serial |
6816 |
| Permanent link to this record |
| |
|
| |
| Author |
Kolev, S.; Bogaerts, A. |
| Title |
A 2D model for a gliding arc discharge |
Type |
A1 Journal article |
| Year |
2015 |
Publication |
Plasma sources science and technology |
Abbreviated Journal |
Plasma Sources Sci T |
| Volume |
24 |
Issue |
24 |
Pages |
015025 |
| Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
| Abstract |
In this study we report on a 2D fluid model of a gliding arc discharge in argon. Despite the 3D nature of the discharge, 2D models are found to be capable of providing very useful information about the operation of the discharge. We employ two modelsan axisymmetric and a Cartesian one. We show that for the considered experiment and the conditions of a low current arc (around 30 mA) in argon, there is no significant heating of the cathode surface and the discharge is sustained by field electron emission from the cathode accompanied by the formation of a cathode spot. The obtained discharge power and voltage are relatively sensitive to the surface properties and particularly to the surface roughness, causing effectively an amplification of the normal electric field. The arc body and anode region are not influenced by this and depend mainly on the current value. The gliding of the arc is modelled by means of a 2D Cartesian model. The arcelectrode contact points are analysed and the gliding mechanism along the electrode surface is discussed. Following experimental observations, the cathode spot is simulated as jumping from one point to another. A complete arc cycle is modelled from initial ignition to arc decay. The results show that there is no interaction between the successive gliding arcs. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
Institute of Physics |
Place of Publication |
Bristol |
Editor |
|
| Language |
|
Wos |
000348298200026 |
Publication Date |
2014-12-23 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0963-0252;1361-6595; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.302 |
Times cited |
34 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 3.302; 2015 IF: 3.591 |
| Call Number |
c:irua:122538 c:irua:122538 c:irua:122538 c:irua:122538 |
Serial |
3 |
| Permanent link to this record |
| |
|
| |
| Author |
Bultinck, E.; Bogaerts, A. |
| Title |
Characterization of an Ar/O2 magnetron plasma by a multi-species Monte Carlo model |
Type |
A1 Journal article |
| Year |
2011 |
Publication |
Plasma sources science and technology |
Abbreviated Journal |
Plasma Sources Sci T |
| Volume |
20 |
Issue |
4 |
Pages |
045013-045013,12 |
| Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
| Abstract |
A combined Monte Carlo (MC)/analytical surface model is developed to study the plasma processes occurring during the reactive sputter deposition of TiOx thin films. This model describes the important plasma species with a MC approach (i.e. electrons, Ar+ ions, {\rm O}_2 |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
Institute of Physics |
Place of Publication |
Bristol |
Editor |
|
| Language |
|
Wos |
000295829800015 |
Publication Date |
2011-06-14 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0963-0252;1361-6595; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.302 |
Times cited |
7 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 3.302; 2011 IF: 2.521 |
| Call Number |
UA @ lucian @ c:irua:89732 |
Serial |
316 |
| Permanent link to this record |
| |
|
| |
| Author |
Bogaerts, A. |
| Title |
Comprehensive modelling network for dc glow discharges in argon |
Type |
A1 Journal article |
| Year |
1999 |
Publication |
Plasma sources science and technology |
Abbreviated Journal |
Plasma Sources Sci T |
| Volume |
8 |
Issue |
|
Pages |
210-229 |
| Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
| Abstract |
|
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
Institute of Physics |
Place of Publication |
Bristol |
Editor |
|
| Language |
|
Wos |
000080660600004 |
Publication Date |
2002-08-25 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0963-0252;1361-6595; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.302 |
Times cited |
27 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 3.302; 1999 IF: 2.038 |
| Call Number |
UA @ lucian @ c:irua:24129 |
Serial |
451 |
| Permanent link to this record |
| |
|
| |
| Author |
Tinck, S.; Bogaerts, A. |
| Title |
Computer simulations of an oxygen inductively coupled plasma used for plasma-assisted atomic layer deposition |
Type |
A1 Journal article |
| Year |
2011 |
Publication |
Plasma sources science and technology |
Abbreviated Journal |
Plasma Sources Sci T |
| Volume |
20 |
Issue |
1 |
Pages |
015008-015008,10 |
| Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
| Abstract |
In this paper, an O2 inductively coupled plasma used for plasma enhanced atomic layer deposition of Al2O3 thin films is investigated by means of modeling. This work intends to provide more information about basic plasma properties such as species densities and species fluxes to the substrate as a function of power and pressure, which might be hard to measure experimentally. For this purpose, a hybrid model developed by Kushner et al is applied to calculate the plasma characteristics in the reactor volume for different chamber pressures ranging from 1 to 10 mTorr and different coil powers ranging from 50 to 500 W. Density profiles of the various oxygen containing plasma species are reported as well as fluxes to the substrate under various operating conditions. Furthermore, different orientations of the substrate, which can be placed vertically or horizontally in the reactor, are taken into account. In addition, special attention is paid to the recombination process of atomic oxygen on the different reactor walls under the stated operating conditions. From this work it can be concluded that the plasma properties change significantly in different locations of the reactor. The plasma density near the cylindrical coil is high, while it is almost negligible in the neighborhood of the substrate. Ion and excited species fluxes to the substrate are found to be very low and negligible. Finally, the orientation of the substrate has a minor effect on the flux of O2, while it has a significant effect on the flux of O. In the horizontal configuration, the flux of atomic oxygen can be up to one order of magnitude lower than in the vertical configuration. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
Institute of Physics |
Place of Publication |
Bristol |
Editor |
|
| Language |
|
Wos |
000286592200009 |
Publication Date |
2011-01-08 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0963-0252;1361-6595; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.302 |
Times cited |
11 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 3.302; 2011 IF: 2.521 |
| Call Number |
UA @ lucian @ c:irua:85285 |
Serial |
467 |
| Permanent link to this record |
| |
|
| |
| Author |
Paulussen, S.; Verheyde, B.; Tu, X.; De Bie, C.; Martens, T.; Petrovic, D.; Bogaerts, A.; Sels, B. |
| Title |
Conversion of carbon dioxide to value-added chemicals in atmospheric pressure dielectric barrier discharges |
Type |
A1 Journal article |
| Year |
2010 |
Publication |
Plasma sources science and technology |
Abbreviated Journal |
Plasma Sources Sci T |
| Volume |
19 |
Issue |
3 |
Pages |
034015,1-034015,6 |
| Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
| Abstract |
The aim of this work consists of the evaluation of atmospheric pressure dielectric barrier discharges for the conversion of greenhouse gases into useful compounds. Therefore, pure CO2 feed flows are administered to the discharge zone at varying discharge frequency, power input, gas temperature and feed flow rates, aiming at the formation of CO and O2. The discharge obtained in CO2 is characterized as a filamentary mode with a microdischarge zone in each half cycle of the applied voltage. It is shown that the most important parameter affecting the CO2-conversion levels is the gas flow rate. At low flow rates, both the conversion and the CO-yield are significantly higher. In addition, also an increase in the gas temperature and the power input give rise to higher conversion levels, although the effect on the CO-yield is limited. The optimum discharge frequency depends on the power input level and it cannot be unambiguously stated that higher frequencies give rise to increased conversion levels. A maximum CO2 conversion of 30% is achieved at a flow rate of 0.05 L min−1, a power density of 14.75 W cm−3 and a frequency of 60 kHz. The most energy efficient conversions are achieved at a flow rate of 0.2 L min−1, a power density of 11 W cm−3 and a discharge frequency of 30 kHz. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
Institute of Physics |
Place of Publication |
Bristol |
Editor |
|
| Language |
|
Wos |
000277982800016 |
Publication Date |
2010-05-22 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0963-0252;1361-6595; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.302 |
Times cited |
116 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 3.302; 2010 IF: 2.218 |
| Call Number |
UA @ lucian @ c:irua:82408 |
Serial |
512 |
| Permanent link to this record |
| |
|
| |
| Author |
De Bie, C.; Martens, T.; van Dijk, J.; Paulussen, S.; Verheyde, B.; Corthals, S.; Bogaerts, A. |
| Title |
Dielectric barrier discharges used for the conversion of greenhouse gases: modeling the plasma chemistry by fluid simulations |
Type |
A1 Journal article |
| Year |
2011 |
Publication |
Plasma sources science and technology |
Abbreviated Journal |
Plasma Sources Sci T |
| Volume |
20 |
Issue |
2 |
Pages |
024008,1-024008,11 |
| Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
| Abstract |
The conversion of methane to value-added chemicals and fuels is considered to be one of the challenges of the 21st century. In this paper we study, by means of fluid modeling, the conversion of methane to higher hydrocarbons or oxygenates by partial oxidation with CO2 or O2 in a dielectric barrier discharge. Sixty-nine different plasma species (electrons, ions, molecules, radicals) are included in the model, as well as a comprehensive set of chemical reactions. The calculation results presented in this paper include the conversion of the reactants and the yields of the reaction products as a function of residence time in the reactor, for different gas mixing ratios. Syngas (i.e. H2 + CO) and higher hydrocarbons (C2Hx) are typically found to be important reaction products. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
Institute of Physics |
Place of Publication |
Bristol |
Editor |
|
| Language |
|
Wos |
000290719900009 |
Publication Date |
2011-04-02 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0963-0252;1361-6595; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.302 |
Times cited |
38 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 3.302; 2011 IF: 2.521 |
| Call Number |
UA @ lucian @ c:irua:87868 |
Serial |
689 |
| Permanent link to this record |
| |
|
| |
| Author |
Peerenboom, K.; Parente, A.; Kozák, T.; Bogaerts, A.; Degrez, G. |
| Title |
Dimension reduction of non-equilibrium plasma kinetic models using principal component analysis |
Type |
A1 Journal article |
| Year |
2015 |
Publication |
Plasma sources science and technology |
Abbreviated Journal |
Plasma Sources Sci T |
| Volume |
24 |
Issue |
24 |
Pages |
025004 |
| Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
| Abstract |
The chemical complexity of non-equilibrium plasmas poses a challenge for plasma modeling because of the computational load. This paper presents a dimension reduction method for such chemically complex plasmas based on principal component analysis (PCA). PCA is used to identify a low-dimensional manifold in chemical state space that is described by a small number of parameters: the principal components. Reduction is obtained since continuity equations only need to be solved for these principal components and not for all the species. Application of the presented method to a CO2 plasma model including state-to-state vibrational kinetics of CO2 and CO demonstrates the potential of the PCA method for dimension reduction. A manifold described by only two principal components is able to predict the CO2 to CO conversion at varying ionization degrees very accurately. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
Institute of Physics |
Place of Publication |
Bristol |
Editor |
|
| Language |
|
Wos |
000356816200008 |
Publication Date |
2015-01-27 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0963-0252;1361-6595; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.302 |
Times cited |
11 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 3.302; 2015 IF: 3.591 |
| Call Number |
c:irua:123534 |
Serial |
704 |
| Permanent link to this record |
| |
|
| |
| Author |
Zhao, S.-X.; Gao, F.; Wang, Y.-N.; Bogaerts, A. |
| Title |
The effect of F2 attachment by low-energy electrons on the electron behaviour in an Ar/CF4 inductively coupled plasma |
Type |
A1 Journal article |
| Year |
2012 |
Publication |
Plasma sources science and technology |
Abbreviated Journal |
Plasma Sources Sci T |
| Volume |
21 |
Issue |
2 |
Pages |
025008-025008,13 |
| Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
| Abstract |
The electron behaviour in an Ar/CF4 inductively coupled plasma is investigated by a Langmuir probe and a hybrid model. The simulated and measured results include electron density, temperature and electron energy distribution function for different values of Ar/CF4 ratio, coil power and gas pressure. The hybrid plasma equipment model simulations show qualitative agreement with experiment. The effect of F2 electron attachment on the electron behaviour is explored by comparing two sets of data based on different F atom boundary conditions. It is demonstrated that electron attachment at F2 molecules is responsible for the depletion of low-energy electrons, causing a density decrease as well as a temperature increase when CF4 is added to an Ar plasma. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
Institute of Physics |
Place of Publication |
Bristol |
Editor |
|
| Language |
|
Wos |
000302779400022 |
Publication Date |
2012-03-12 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0963-0252;1361-6595; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.302 |
Times cited |
23 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 3.302; 2012 IF: 2.515 |
| Call Number |
UA @ lucian @ c:irua:96549 |
Serial |
841 |
| Permanent link to this record |
| |
|
| |
| Author |
Liu, Y.-X.; Zhang, Q.-Z.; Liu, L.; Song, Y.-H.; Bogaerts, A.; Wang, Y.-N. |
| Title |
Electron bounce resonance heating in dual-frequency capacitively coupled oxygen discharges |
Type |
A1 Journal article |
| Year |
2013 |
Publication |
Plasma sources science and technology |
Abbreviated Journal |
Plasma Sources Sci T |
| Volume |
22 |
Issue |
2 |
Pages |
025012-11 |
| Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
| Abstract |
The electron bounce resonance heating (BRH) in dual-frequency capacitively coupled plasmas operated in oxygen is studied by different experimental methods and a particle-in-cell/Monte Carlo collision (PIC/MCC) simulation, and compared with the electropositive argon discharge. In comparison with argon, the experimental results show that in an oxygen discharge the resonance peaks in positive-ion density and light intensity tend to occur at larger electrode gaps. Moreover, at electrode gaps L > 2.5 cm, the positive-ion (and electron) density and the light emission drop monotonically in the oxygen discharge upon increasing L, whereas they rise (after an initial drop) in the argon case. At resonance gap the electronegativity reaches its maximum due to the BRH. All these experimental observations are explained by PIC/MCC simulations, which show that in the oxygen discharge the bulk electric field becomes quite strong and is out of phase with the sheath field. Therefore, it retards the resonance electrons when traversing the bulk, resulting in a suppressed BRH. Both experiment and simulation results show that this effect becomes more pronounced at lower high-frequency power, when the discharge mode changes from electropositive to electronegative. In a pure oxygen discharge, the BRH is suppressed with increasing pressure and almost diminishes at 12 Pa. Finally, the driving frequency significantly affects the BRH, because it determines the phase relation between bulk electric field and sheath electric field. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
Institute of Physics |
Place of Publication |
Bristol |
Editor |
|
| Language |
|
Wos |
000317275400014 |
Publication Date |
2013-03-18 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0963-0252;1361-6595; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.302 |
Times cited |
20 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 3.302; 2013 IF: 3.056 |
| Call Number |
UA @ lucian @ c:irua:106534 |
Serial |
911 |
| Permanent link to this record |
| |
|
| |
| Author |
Kálna, K.; Mo×ko, M.; Peeters, F.M. |
| Title |
Electron capture in GaAs quantum wells via electron-electron and optic phonon scattering |
Type |
A1 Journal article |
| Year |
1996 |
Publication |
Applied physics letters |
Abbreviated Journal |
Appl Phys Lett |
| Volume |
68 |
Issue |
|
Pages |
117-119 |
| Keywords |
A1 Journal article; Condensed Matter Theory (CMT) |
| Abstract |
|
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
American Institute of Physics |
Place of Publication |
New York, N.Y. |
Editor |
|
| Language |
|
Wos |
A1996TM84700040 |
Publication Date |
0000-00-00 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0003-6951; 1077-3118 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.302 |
Times cited |
10 |
Open Access |
|
| Notes |
|
Approved |
no |
| Call Number |
UA @ lucian @ c:irua:15802 |
Serial |
912 |
| Permanent link to this record |
| |
|
| |
| Author |
Yan, M.; Bogaerts, A.; Goedheer, W.J.; Gijbels, R. |
| Title |
Electron energy distribution function in capacitively coupled RF discharges: differences between electropositive Ar and electronegative SiH4 discharges |
Type |
A1 Journal article |
| Year |
2000 |
Publication |
Plasma sources science and technology |
Abbreviated Journal |
Plasma Sources Sci T |
| Volume |
9 |
Issue |
|
Pages |
583-591 |
| Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
| Abstract |
|
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
Institute of Physics |
Place of Publication |
Bristol |
Editor |
|
| Language |
|
Wos |
000165341000015 |
Publication Date |
2002-08-25 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0963-0252;1361-6595; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.302 |
Times cited |
21 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 3.302; 2000 IF: 1.963 |
| Call Number |
UA @ lucian @ c:irua:34071 |
Serial |
929 |
| Permanent link to this record |
| |
|
| |
| Author |
Van Laer, K.; Tinck, S.; Samara, V.; de Marneffe, J.F.; Bogaerts, A. |
| Title |
Etching of low-k materials for microelectronics applications by means of a N2/H2 plasma : modeling and experimental investigation |
Type |
A1 Journal article |
| Year |
2013 |
Publication |
Plasma sources science and technology |
Abbreviated Journal |
Plasma Sources Sci T |
| Volume |
22 |
Issue |
2 |
Pages |
025011-25019 |
| Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
| Abstract |
In this paper, we investigate the etch process of so-called low-k organic material by means of a N2/H2 capacitively coupled plasma, as applied in the micro-electronics industry for the manufacturing of computer chips. In recent years, such an organic material has emerged as a possible alternative for replacing bulk SiO2 as a dielectric material in the back-end-of-line, because of the smaller parasitic capacity between adjacent conducting lines, and thus a faster propagation of the electrical signals throughout the chip. Numerical simulations with a hybrid plasma model, using an extensive plasma and surface chemistry set, as well as experiments are performed, focusing on the plasma properties as well as the actual etching process, to obtain a better insight into the underlying mechanisms. Furthermore, the effects of gas pressure, applied power and gas composition are investigated to try to optimize the etch process. In general, the plasma density reaches a maximum near the wafer edge due to the so-called 'edge effect'. As a result, the etch rate is not uniform but will also reach its maximum near the wafer edge. The pressure seems not to have a big effect. A higher power increases the etch rate, but the uniformity becomes (slightly) worse. The gas mixing ratio has no significant effect on the etch process, except when a pure H2 or N2 plasma is used, illustrating the synergistic effects of a N2/H2 plasma. In fact, our calculations reveal that the N2/H2 plasma entails an ion-enhanced etch process. The simulation results are in reasonable agreement with the experimental values. The microscopic etch profile shows the desired anisotropic shape under all conditions under study. |
| Address |
|
| Corporate Author |
|
Thesis |
|
| Publisher |
Institute of Physics |
Place of Publication |
Bristol |
Editor |
|
| Language |
|
Wos |
000317275400013 |
Publication Date |
2013-03-18 |
| Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| Series Volume |
|
Series Issue |
|
Edition |
|
| ISSN |
0963-0252;1361-6595; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| Impact Factor |
3.302 |
Times cited |
13 |
Open Access |
|
| Notes |
|
Approved |
Most recent IF: 3.302; 2013 IF: 3.056 |
| Call Number |
UA @ lucian @ c:irua:106654 |
Serial |
1084 |
| Permanent link to this record |
