NANOlab Center of Excellence literature database -- Query Results

	NANOlab Center of Excellence literature database Home \| Show All \| Simple Search \| Advanced Search	Login Quick Search: Field: contains: ...
	301–330 of 336 records found matching your query (RSS):

Select All Deselect All

<< 1 2 3 4 5 6 7 8 9 10 11 12 >>

List View

Citations

Details

	Records
	Author	Wang, X.; Li, K.; Schryvers, D.; Verlinden, B.; Van Humbeeck, J.
	Title	R-phase transition and related mechanical properties controlled by low-temperature aging treatment in a Ti50.8 at.% Ni thin wire			Type	A1 Journal article
	Year	2014	Publication	Scripta materialia	Abbreviated Journal	Scripta Mater
	Volume	72-73	Issue		Pages	21-24
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	A cold-drawn Ti50.8 at.% Ni wire was annealed at 600 °C for 30 min, followed by aging at 250 °C for different times. A microstructure with small grains and nanoscaled precipitates was obtained. The thermally induced martensite transformation is suppressed in the samples aged for 4 h or longer, leaving a one-stage R-phase transition between −150 and +150 °C. The transformation behavior, work output and recovery stress associated with the R-phase transition are presented.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000329148500006	Publication Date	2013-10-17
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-6462;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.747	Times cited	27	Open Access
	Notes	Fwo			Approved	Most recent IF: 3.747; 2014 IF: 3.224
	Call Number	UA @ lucian @ c:irua:111847			Serial	2806
Permanent link to this record



	Author	Yandouzi, M.; Pauwels, B.; Schryvers, D.; van Swygenhoven, H.; Van Tendeloo, G.
	Title	Structural characterisation of nanostructured Ni₃Al processed by inert gas condensation			Type	A3 Journal article
	Year	2003	Publication	Defects and diffusion in metals	Abbreviated Journal
	Volume	213/215	Issue		Pages	19-30
	Keywords	A3 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos		Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Additional Links	UA library record; WoS full record;
	Impact Factor		Times cited		Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:48777			Serial	3215
Permanent link to this record



	Author	Yandouzi, M.; Pauwels, B.; Schryvers, D.; Van Swygenhoven, H.; Van Tendeloo, G.
	Title	Structural characterization of nanostructured Ni₃Al processed by inert gas condensation			Type	A1 Journal article
	Year	2003	Publication	Diffusion and defect data : solid state data : part A : defect and diffusion forum	Abbreviated Journal
	Volume	213	Issue	2	Pages	19-30
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	High-resolution transmission electron microscopy was performed on compacted Ni(3)Al nanostructured material prepared by the inert gas condensation technique. From electron diffraction data an incomplete L1(2) ordering of the crystallites is observed in the free particles as well as in the room temperature compacted samples. However, a completely ordered L1(2) structure with much bigger and well-defined crystallites exhibiting several defects is observed in material compacted and annealed at 773 K. Sharp crystallite boundaries as well as amorphous material and voids are observed in between crystallites in all samples, the former being dominant in the annealed material, the latter in the as-prepared one.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Aedermannsdorf	Editor
	Language		Wos		Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1012-0386	ISBN		Additional Links	UA library record; WoS full record;
	Impact Factor		Times cited		Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:94868			Serial	3221
Permanent link to this record



	Author	Yang, Z.; Schryvers, D.
	Title	Composition gradients surrounding Ni₄Ti₃ precipitates in a NiTi alloy studied by EELS, EFTEM and EDX			Type	A1 Journal article
	Year	2006	Publication	International journal of applied electromagnetics and mechanics	Abbreviated Journal	Int J Appl Electrom
	Volume	23	Issue	1/2	Pages	17-24
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos		Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1383-5416	ISBN		Additional Links	UA library record; WoS full record;
	Impact Factor	0.769	Times cited		Open Access
	Notes				Approved	Most recent IF: 0.769; 2006 IF: 0.262
	Call Number	UA @ lucian @ c:irua:59610			Serial	443
Permanent link to this record



	Author	Seo, J.W.; Schryvers, D.; Potapov, P.
	Title	Electron microscopy study of ternary precipitates in Ni39.6Mn47.5Ti12.9			Type	P1 Proceeding
	Year	1998	Publication		Abbreviated Journal
	Volume		Issue		Pages	17-18
	Keywords	P1 Proceeding; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher	IOP Publishing Ltd	Place of Publication	Bristol	Editor
	Language		Wos	000077019900008	Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0-7503-0565-7	ISBN		Additional Links	UA library record; WoS full record;
	Impact Factor		Times cited		Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:95855			Serial	972
Permanent link to this record



	Author	Schryvers, D.; Van Aert, S.; Delville, R.; Idrissi, H.; Turner, S.; Salje, E.K.H.
	Title	Dedicated TEM on domain boundaries from phase transformations and crystal growth			Type	A1 Journal article
	Year	2013	Publication	Phase transitions	Abbreviated Journal	Phase Transit
	Volume	86	Issue	1	Pages	15-22
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Investigating domain boundaries and their effects on the behaviour of materials automatically implies the need for detailed knowledge on the structural aspects of the atomic configurations at these interfaces. Not only in view of nearest neighbour interactions but also at a larger scale, often surpassing the unit cell, the boundaries can contain structural elements that do not exist in the bulk. In the present contribution, a number of special boundaries resulting from phase transformations or crystal growth and those recently investigated by advanced transmission electron microscopy techniques in different systems will be reviewed. These include macrotwins between microtwinned martensite plates in NiAl, austenite-single variant martensite habit planes in low hysteresis NiTiPd, nanotwins in non-textured nanostructured Pd and ferroelastic domain boundaries in CaTiO3. In all discussed cases these boundaries play an essential role in the properties of the respective materials.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York	Editor
	Language		Wos	000312586700003	Publication Date	2012-12-19
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0141-1594;1029-0338;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.06	Times cited		Open Access
	Notes	Fwo; Iap			Approved	Most recent IF: 1.06; 2013 IF: 1.044
	Call Number	UA @ lucian @ c:irua:101222			Serial	612
Permanent link to this record



	Author	Schryvers, D.; Potapov, P.; Santamarta, R.; Tirry, W.
	Title	Applications of advanced transmission electron microscopic techniques to Ni-Ti based shape memory materials			Type	A1 Journal article
	Year	2004	Publication	Materials science and engineering: part A: structural materials: properties, microstructure and processing	Abbreviated Journal	Mat Sci Eng A-Struct
	Volume	378	Issue	1/2	Pages	11-15
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lausanne	Editor
	Language		Wos	000223329900003	Publication Date	2004-03-23
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0921-5093;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.094	Times cited	6	Open Access
	Notes				Approved	Most recent IF: 3.094; 2004 IF: 1.445
	Call Number	UA @ lucian @ c:irua:48783			Serial	145
Permanent link to this record



	Author	Lu, J.B.; Schryvers, D.
	Title	Microstructure and phase composition characterization in a Co38Ni33Al29 ferromagnetic shape memory alloy			Type	A1 Journal article
	Year	2016	Publication	Materials characterization	Abbreviated Journal	Mater Charact
	Volume	118	Issue	118	Pages	9-13
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Transmission electron microscopy was performed to investigate the microstructures of a secondary phase and its surrounding matrix in a Co38Ni33Al29 ferromagnetic shape memory alloy. The secondary phase shows a γ′ L12 structure exhibiting a dendritic morphology with enclosed B2 austenite regions while the matrix shows the L10 martensitic structure. A secondary phase-austenite-martensite sandwich structure with residual austenite ranging from several hundred nanometers to several micrometers wide is observed at the secondary phase-martensite interface due to the depletion of Co and enrichment of Al in the chemical gradient zone and the effect of the strong martensitic start temperature dependency of the element concentrations. The crystallographic orientation relationship of the secondary phase and the B2 austenite fits the Kurdjumov-Sachs relationship.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000383292000002	Publication Date	2016-05-04
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1044-5803	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.714	Times cited	3	Open Access
	Notes	J.B. Lu thanks the Belgian Science Ministry (Belspo) for support of his post-doctoral research stay at EMAT. We thank S. Sedlakova-Ignacova from the Institute of Physics in Prague, Czech Republic, for providing samples.			Approved	Most recent IF: 2.714
	Call Number	c:irua:133100			Serial	4071
Permanent link to this record



	Author	Lambrinou, K.; Charalampopoulou, E.; Van der Donck, T.; Delville, R.; Schryvers, D.
	Title	Dissolution corrosion of 316L austenitic stainless steels in contact with static liquid lead-bismuth eutectic (LBE) at 500 °C			Type	A1 Journal article
	Year	2017	Publication	Journal of nuclear materials	Abbreviated Journal	J Nucl Mater
	Volume	490	Issue	490	Pages	9-27
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	This work addresses the dissolution corrosion behaviour of 316L austenitic stainless steels. For this purpose, solution-annealed and cold-deformed 316L steels were simultaneously exposed to oxygen-poor (<10-8 mass%) static liquid lead-bismuth eutectic (LBE) for 253e3282 h at 500 °C. Corrosion was consistently more severe for the cold-drawn steels than the solution-annealed steel, indicating the importance of the steel thermomechanical state. The thickness of the dissolution-affected zone was nonuniform, and sites of locally-enhanced dissolution were occasionally observed. The progress of LBE dissolution attack was promoted by the interplay of certain steel microstructural features (grain boundaries, deformation twin laths, precipitates) with the dissolution corrosion process. The identified dissolution mechanisms were selective leaching leading to steel ferritization, and non-selective leaching; the latter was mainly observed in the solution-annealed steel. The maximum corrosion rate decreased with exposure time and was found to be inversely proportional to the depth of dissolution attack.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000403132300002	Publication Date	2017-04-10
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-3115	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.048	Times cited	24	Open Access	OpenAccess
	Notes	The authors would like to acknowledge the following 316L stainless steel suppliers: Industeel, ArcelorMittal Group, for the 316LSA plate procured and characterised in the FP6 EUROTRANSDEMETRA project (Contract no. FI6W-CT-2004-516520); OLARRA Aceros Inoxidables, Spain, for the 316LH1 rod; and SIDERO STAAL nv, Belgium, for the 316LH2 rod. K. Lambrinou would like to thank J. Joris for technical support during the launching and follow up of all corrosion tests, J. Lim for the manufacturing and calibration of the oxygen sensors used in these tests, T. Lapauw for the XRD measurements on the pristine steels, and S. Van den Broeck for the FIB sample preparation. Special thanks to S. Gavrilov for fruitful and intense discussions. The authors gratefully acknowledge the funding provided in the framework of the ongoing development of the MYRRHA irradiation facility. The research leading to these results falls within the framework of the European Energy Research Alliance Joint Programme on Nuclear Materials (EERA JPNM).			Approved	Most recent IF: 2.048
	Call Number	EMAT @ emat @ c:irua:142644			Serial	4563
Permanent link to this record



	Author	Pauwels, B.; Yandouzi, M.; Schryvers, D.; Van Tendeloo, G.; Verschoren, G.; Lievens, P.; Hou, M.; van Swygenhoven, H.
	Title	Atomic scale characterization of supported and assembled nanoparticles			Type	P3 Proceeding
	Year	2001	Publication		Abbreviated Journal
	Volume		Issue		Pages	B8.3,1-6
	Keywords	P3 Proceeding; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	s.l.	Editor
	Language		Wos		Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Additional Links	UA library record
	Impact Factor		Times cited		Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:48390			Serial	181
Permanent link to this record



	Author	Zhurkin, E.; Hou, M.; van Swygenhoven, H.; Pauwels, B.; Yandouzi, M.; Schryvers, D.; Van Tendeloo, G.; Lievens, P.; Verschoren, G.; Kuriplach, J.; van Peteghem, S.; Segers, D.; Dauwe, C.
	Title	Atomic scale modeling of supported and assembled nanoparticles			Type	P3 Proceeding
	Year	2001	Publication		Abbreviated Journal
	Volume		Issue		Pages	B8.2,1-6
	Keywords	P3 Proceeding; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	s.l.	Editor
	Language		Wos		Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Additional Links	UA library record
	Impact Factor		Times cited		Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:48391			Serial	186
Permanent link to this record



	Author	van Renterghem, W.; Goessens, C.; Schryvers, D.; van Landuyt, J.; Verrept, P.; Bollen, D.; van Roost, C.; de Keyzer, R.
	Title	Defects in AgCl and AgBr(100) tabular crystals studied by TEM			Type	P3 Proceeding
	Year	1998	Publication		Abbreviated Journal
	Volume		Issue		Pages	6-11
	Keywords	P3 Proceeding; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Antwerpen	Editor
	Language		Wos		Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Additional Links	UA library record
	Impact Factor		Times cited		Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:29680			Serial	628
Permanent link to this record



	Author	Lu, J.B.; Shi, H.; Sedlakova-Ignacova, S.; Espinoza, R.; Kopeček, J.; Sittner, P.; Bártová, B.; Schryvers, D.
	Title	Microstructure and precipitates in annealed Co₃₈Ni₃₃Al₂₉ ferromagnetic shape memory alloy			Type	A1 Journal article
	Year	2013	Publication	Journal of alloys and compounds	Abbreviated Journal	J Alloy Compd
	Volume	572	Issue		Pages	5-10
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Transmission electron microscopy was performed to investigate the microstructure and precipitates in the annealed Co38Ni33Al29 ferromagnetic shape memory alloy. Apart from the dendritic secondary phase in the austenite matrix, micron-sized (up to 100 μm) fcc-based precipitates with partial γ′ L12 ordering and containing none, one or three {1 1 1}p parallel twin planes were found. The orientation relationship between the precipitates and matrix was found to be KurdjumovSachs. STEMEDX analysis indicates that twinned and non-twinned precipitates are Co-rich and Al- and Ni-deficient with respect to the matrix and with a lower Co/Al ratio for the latter. The 3D morphologies of precipitates were reconstructed with focused ion beam/scanning electron microscope dual-beam slice-and-view imaging, showing that the single {1 1 1}p plane twinned precipitates have a plate-like shape while the non-twinned precipitates are lath-like and often bent.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000319209600002	Publication Date	2013-04-02
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0925-8388;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.133	Times cited	10	Open Access
	Notes				Approved	Most recent IF: 3.133; 2013 IF: 2.726
	Call Number	UA @ lucian @ c:irua:107914			Serial	2058
Permanent link to this record



	Author	Schryvers, D.; Goessens, C.; van Renterghem, W.; van Landuyt, J.; de Keyzer, R.
	Title	Conventional and HREM study of structural defects in nanostructured silver halides			Type	P3 Proceeding
	Year	1998	Publication		Abbreviated Journal
	Volume		Issue		Pages	1-6
	Keywords	P3 Proceeding; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Antwerpen	Editor
	Language		Wos		Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Additional Links	UA library record
	Impact Factor		Times cited		Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:29681			Serial	509
Permanent link to this record



	Author	Peirs, J.; Verleysen, P.; Tirry, W.; Rabet, L.; Schryvers, D.; Degrieck, J.
	Title	Dynamic shear localization in Ti6Al4V			Type	P1 Proceeding
	Year	2011	Publication	Procedia Engineering T2 – 11th International Conference on the Mechanical Behavior of Materials, (ICM), 2011, Como, ITALY (ICM11)	Abbreviated Journal
	Volume		Issue		Pages	1-6
	Keywords	P1 Proceeding; Electron microscopy for materials research (EMAT)
	Abstract	The alloy Ti6Al4V is known to be prone to the formation of adiabatic shear bands when dynamically loaded in shear. This causes a catastrophic decrease of the load carrying capacity and is usually followed by fracture. Although, the main mechanism is recognized to be the competition between strain hardening and thermal softening, a detailed understanding of the role of microstructural plasticity mechanisms and macroscopic loading conditions does not exist yet. To study strain localization and shear fracture, different high strain rate shear tests have been carried out: compression of hat-shaped specimens, torsion of thin walled tubular specimens and in-plane shear tests. The value of the three techniques in studying shear localization is evaluated. Post-mortem analysis of the fracture surface and the materials' microstructure is performed with optical and electron microscopy. In all cases a ductile fracture is observed. SEM and TEM techniques are used to study the local microstructure and composition in the shear band and as such the driving mechanism for the ASB formation. (C) 2011 Published by Elsevier Ltd. Selection and/or peer-review under responsibility of ICM11
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000300451302060	Publication Date	2011-06-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume	10	Series Issue		Edition
	ISSN	1877-7058;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	4	Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:113069			Serial	767
Permanent link to this record



	Author	Coghe, F.; Tirry, W.; Rabet, L.; Schryvers, D.; Van Houtte, P.
	Title	Importance of twinning in static and dynamic compression of a Ti-6Al-4V titanium alloy with an equiaxed microstructure			Type	A1 Journal article
	Year	2012	Publication	Materials science and engineering: part A: structural materials: properties, microstructure and processing	Abbreviated Journal	Mat Sci Eng A-Struct
	Volume	537	Issue		Pages	1-10
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Whereas deformation twinning is known to be an important deformation mechanism for hexagonal materials like magnesium and pure titanium, so far almost no literature exists on the twinning behaviour of the Ti-6Al-4V alloy. In this work it was shown that the activation of twinning as a deformation mechanism could have a pronounced effect on the mechanical behaviour of the Ti-6Al-4V alloy. This effect is even more pronounced under dynamic loading conditions. Transmission electron microscopy showed that only the {1 0 1 2}{1 0 1 1} tensile twin system was activated under certain loading conditions. Light-optical microscopy and electron backscatter diffraction data were afterwards used to experimentally determine the twin fractions. The importance of twinning for the texture evolution was also studied. It was shown that even small twin fractions can lead to distinct texture features, especially due to the discrete reorientation of the c-axes. The experimental results were compared to simulated results that were obtained with a viscoplastic self-consistent crystal plasticity code, after experimental validation that twinning can be reliably modelled as a unidirectional slip system. Although good agreement was obtained for the experimental and simulated stress-strain curves, the simulated results concerning twinning correlated well only on a qualitative basis as the simulated twin fractions were systematically higher than the experimental fractions. This seems to strengthen the hypothesis made by other research groups that complete grains might reorient by twinning. (C) 2011 Elsevier B.V. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lausanne	Editor
	Language		Wos	000301473300001	Publication Date	2011-12-21
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0921-5093;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.094	Times cited	35	Open Access
	Notes				Approved	Most recent IF: 3.094; 2012 IF: 2.108
	Call Number	UA @ lucian @ c:irua:97818			Serial	1565
Permanent link to this record



	Author	Muto, S.; Schryvers, D.
	Title	In situ high resolution electron microscopy observation of electron-irradiation-induced martensitic transformation in a Ni₆₃Al₃₇ alloy			Type	A1 Journal article
	Year	1993	Publication	Journal of alloys and compounds	Abbreviated Journal	J Alloy Compd
	Volume	199	Issue	1-2	Pages	1-6
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	An electron-irradiation-induced transformation from cubic beta2 austenite to monoclinic 7M martensite was observed in situ under high resolution electron microscopy conditions in a thin foil of Ni63Al37 beta2 phase (B2, CsCl structure), with the start temperature of the martensitic transformation below but very close to room temperature. The structure of the martensite is consistent with thermoelastic or stress-induced martensite at this composition, including the existence of multiple stacking faults. The transformation is described by a gradual increase in the shear and shuffle amplitudes already existing in the precursor domains. Possible origins of the transformation are discussed.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	A1993LV15200004	Publication Date	2003-06-21
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0925-8388;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.999	Times cited	8	Open Access
	Notes				Approved	no
	Call Number	UA @ lucian @ c:irua:102953			Serial	1576
Permanent link to this record



	Author	Muto, S.; Schryvers, D.
	Title	In-situ HREM observation of electron-irradation-induced martensitic transformation in a Ni₆₃Al₃₇ alloy			Type	A1 Journal article
	Year	1993	Publication	Journal of alloys and compounds	Abbreviated Journal	J Alloy Compd
	Volume	199	Issue		Pages	1-6
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	A1993LV15200004	Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0925-8388	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.999	Times cited	8	Open Access
	Notes				Approved	no
	Call Number	UA @ lucian @ c:irua:6777			Serial	1579
Permanent link to this record



	Author	Potapov, P.; Shelyakov, A.; Schryvers, D.
	Title	On the crystal structure of TiNi-Cu martensite			Type	A1 Journal article
	Year	2001	Publication	Scripta materialia	Abbreviated Journal	Scripta Mater
	Volume	44	Issue		Pages	1-7
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000166808100001	Publication Date	2002-07-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-6462;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.747	Times cited	36	Open Access
	Notes				Approved	Most recent IF: 3.747; 2001 IF: 1.130
	Call Number	UA @ lucian @ c:irua:48378			Serial	2433
Permanent link to this record



	Author	Van Tendeloo, G.; Schryvers, D.; Tanner, L.E.; Broddin, D.; Ricolleau, C.; Loiseau, A.
	Title	Structural phase transformations in alloys: an electron microscopy study			Type	P3 Proceeding
	Year	1991	Publication	Symposium on Pahse Transformations	Abbreviated Journal
	Volume		Issue		Pages	1-10
	Keywords	P3 Proceeding; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos		Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Additional Links	UA library record
	Impact Factor		Times cited		Open Access
	Notes				Approved
	Call Number	UA @ lucian @ c:irua:48350			Serial	3244
Permanent link to this record



	Author	Penders, A.; Konstantinovic, M.J.; Bosch, R.W.; Schryvers, D.
	Title	Crack initiation in tapered high Si stainless steel specimens : stress threshold analyses			Type	A1 Journal article
	Year	2020	Publication	Corrosion Engineering Science And Technology	Abbreviated Journal	Corros Eng Sci Techn
	Volume		Issue		Pages	1-8
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Tapered specimens were used for an accelerated test technique to study the crack initiation of high Si stainless steel by means of constant elongation rate tensile testing in a simulated pressurised water reactor environment. Detailed crack density distributions were obtained by applying an advanced crack detection algorithm on iteratively displaced scanning electron microscopy pictures featuring stress corrosion cracks along the specimen's gauge length. By means of finite-element analysis, prominent peaks in the crack density graphs are demonstrated to be related to stress relief and stress build-up during the crack initiation phase. Intrinsic scatter related to the crack detection suggests that stress corrosion cracking is independent of the strain-rate for strain-rates lower than 10(-6 )s(-1). Based on the extrapolation to constant load conditions, the critical threshold value for the duplex high Si stainless steel is estimated to be around 580 MPa.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000549651600001	Publication Date	2020-06-30
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1478-422x	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.8	Times cited	1	Open Access	Not_Open_Access
	Notes	; We would like to acknowledge ENGIE Electrabel for the financial support of this work under the contract number BSUEZ5500. ;			Approved	Most recent IF: 1.8; 2020 IF: 0.879
	Call Number	UA @ admin @ c:irua:171292			Serial	6478
Permanent link to this record



	Author	Pourbabak, S.; Verlinden, B.; Van Humbeeck, J.; Schryvers, D.
	Title	DSC cycling effects on phase transformation temperatures of micron and submicron grain Ni_50.8Ti_49.2 microwires			Type	A1 Journal article
	Year	2020	Publication	Shape memory and superelasticity	Abbreviated Journal
	Volume		Issue		Pages	1-10
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The effect of thermal cycling parameters on the phase transformation temperatures of micron and submicron grain size recrystallized Ni-Ti microwires was investigated. The suppression of martensitic transformation by thermal cycling was found to enhance when combined with room temperature aging between the cycles and enhances even more when aged at elevated temperature of 100 degrees C. While aging at room temperature alone has no clear effect on the martensitic transformation, elevated temperature aging at 100 degrees C alone suppresses the martensitic transformation. All aforementioned effects were found to be stronger in large grain samples than in small grain samples. Martensitic transformation suppression in all cases was in line with the formation of Ni4Ti3 precursors in the form of < 111 & rang;(B2) Ni clusters as concluded from the observed diffuse intensity in the electron diffraction patterns revealing short-range ordering enhancement. Performing thermal cycling in some different temperature ranges to separate the effect of martensitic transformation and high temperature range of DSC cycling revealed that both high temperature- and martensitic transformation-included cycles enhance the short-range ordering.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000530232800001	Publication Date	2020-05-04
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2199-384x; 2199-3858	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	1	Open Access	Not_Open_Access
	Notes	; S.P. would like to thank the Flemish Science Foundation FWO for financial support under Project G.0366.15N. ;			Approved	Most recent IF: NA
	Call Number	UA @ admin @ c:irua:169514			Serial	6492
Permanent link to this record



	Author	Pourbabak, S.; Orekhov, A.; Schryvers, D.
	Title	Twin-jet electropolishing for damage-free transmission electron microscopy specimen preparation of metallic microwires			Type	A1 Journal article
	Year	2020	Publication	Microscopy Research And Technique	Abbreviated Journal	Microsc Res Techniq
	Volume		Issue		Pages	1-7
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	A method to prepare TEM specimens from metallic microwires and based on conventional twin-jet electropolishing is introduced. The wire is embedded in an opaque epoxy resin medium and the hardened resin is mechanically polished to reveal the wire on both sides. The resin containing wire is then cut into discs of the appropriate size. The obtained embedded wire is electropolished in a conventional twin-jet electropolishing machine until electron transparency in large areas without radiation damage is achieved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000567944200001	Publication Date	2020-09-28
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1059-910x	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.5	Times cited		Open Access	OpenAccess
	Notes	; Fonds Wetenschappelijk Onderzoek, Grant/Award Number: G.0366.15N ;			Approved	Most recent IF: 2.5; 2020 IF: 1.147
	Call Number	UA @ admin @ c:irua:171969			Serial	6642
Permanent link to this record



	Author	Yao, X.; Cao, S.; Zhang, X.P.; Schryvers, D.
	Title	Microstructural Characterization and Transformation Behavior of Porous Ni50.8Ti49.2			Type	P1 Proceeding
	Year	2015	Publication	Materials Today: Proceedings	Abbreviated Journal
	Volume	2	Issue	2	Pages	S833-S836
	Keywords	P1 Proceeding; Electron microscopy for materials research (EMAT)
	Abstract	Porous Ni50.8Ti49.2 bulk material was prepared by powder metallurgy sintering. Solid solution and aging treatments were applied to improve the phase homogeneity and phase transformation behavior. Scanning and transmission electron microscopy, aided by energy dispersive X-ray analysis, were used to study the microstructure and chemical phase content of the alloys. In-situ cooling was carried out to observe the phase transformation behavior. As-received material contains dispersed Ni2Ti4O particles while Ni4Ti3 precipitates appear after aging. Close to pore edges, the latter have a preferential orientation due to the induced stress fields in the matrix.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000371032100081	Publication Date	2015-11-05
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2214-7853	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes	The author gratefully acknowledges the Chinese Scholarship Council (CSC) for providing a scholarship and the Key Project of the Natural Science Foundation of Guangdong Province under grant No. S2013020012805.			Approved	Most recent IF: NA
	Call Number	c:irua:129980			Serial	3989
Permanent link to this record



	Author	Idrissi, H.; Bollinger, C.; Boioli, F.; Schryvers, D.; Cordier, P.
	Title	Low-temperature plasticity of olivine revisited with in situ TEM nanomechanical testing			Type	A1 Journal article
	Year	2016	Publication	Science Advances	Abbreviated Journal
	Volume	2	Issue	2	Pages	e1501671-e1501671
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The rheology of the lithospheric mantle is fundamental to understanding how mantle convection couples with plate tectonics. However, olivine rheology at lithospheric conditions is still poorly understood because experiments are difficult in this temperature range where rocks and mineral become very brittle. We combine techniques of quantitative in situ tensile testing in a transmission electron microscope and numerical modeling of dislocation dynamics to constrain the low-temperature rheology of olivine. We find that the intrinsic ductility of olivine at low temperature is significantly lower than previously reported values, which were obtained under strain-hardened conditions. Using this method, we can anchor rheological laws determined at higher temperature and can provide a better constraint on intermediate temperatures relevant for the lithosphere. More generally, we demonstrate the possibility of characterizing the mechanical properties of specimens, which can be available in the form of submillimeter-sized particles only.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000379620200043	Publication Date	2016-03-12
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2375-2548	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	32	Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:134983			Serial	4202
Permanent link to this record



	Author	Goessens, C.; Schryvers, D.; van Landuyt, J.; Amelinckx, S.; Geuens, I.; Gijbels, R.; Jacob, W.; Verbeeck, A.; de Keyzer, R.
	Title	Characterization of crystal defects and analysis of iodide distribution in mixed tabular silver halide grains by conventional transmission electron microscopy, X-ray diffractometry and back-scattered electron imaging			Type	P3 Proceeding
	Year	1991	Publication		Abbreviated Journal
	Volume		Issue		Pages
	Keywords	P3 Proceeding; Electron microscopy for materials research (EMAT); Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	St. Paul, Minn.	Editor
	Language		Wos		Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Additional Links	UA library record
	Impact Factor		Times cited		Open Access
	Notes				Approved
	Call Number	UA @ lucian @ c:irua:710			Serial	320
Permanent link to this record



	Author	Goessens, C.; Schryvers, D.; van Dyck, D.; van Landuyt, J.; de Keyzer, R.
	Title	Electron diffraction evidence for ordering of interstitial silver ions in silver bromide microcrystals			Type	A1 Journal article
	Year	1994	Publication	Icem	Abbreviated Journal
	Volume	13	Issue		Pages
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	A1994BC23W00081	Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Additional Links	UA library record; WoS full record;
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ lucian @ c:irua:10058			Serial	918
Permanent link to this record



	Author	Buschmann, V.; Schryvers, D.; van Landuyt, J.; van Roost, C.
	Title	EM study of sensitisation of silver halide grains			Type	A1 Journal article
	Year	1994	Publication	Icem	Abbreviated Journal
	Volume	13	Issue		Pages
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	A1994BE09Y00185	Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Additional Links	UA library record; WoS full record;
	Impact Factor		Times cited		Open Access
	Notes				Approved	CHEMISTRY, PHYSICAL 77/144 Q3 # MATHEMATICS, INTERDISCIPLINARY 19/101 Q1 # PHYSICS, ATOMIC, MOLECULAR & CHEMICAL 17/35 Q2 #
	Call Number	UA @ lucian @ c:irua:10607			Serial	1030
Permanent link to this record



	Author	Frederickx, P.; De Vis, K.; Wouters, H.; Helary, D.; Schryvers, D.
	Title	Nanoparticles in glass and glazes			Type	P3 Proceeding
	Year	2005	Publication		Abbreviated Journal
	Volume		Issue		Pages
	Keywords	P3 Proceeding; Art; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher	Italian Society of Non Destructive Testing Monitoring	Place of Publication	Rome	Editor
	Language		Wos		Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Additional Links	UA library record
	Impact Factor		Times cited		Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:107750			Serial	2261
Permanent link to this record



	Author	Grieten, E.; Schalm, O.; Tack, P.; Bauters, S.; Storme, P.; Gauquelin, N.; Caen, J.; Patelli, A.; Vincze, L.; Schryvers, D.
	Title	Reclaiming the image of daguerreotypes: Characterization of the corroded surface before and after atmospheric plasma treatment			Type	A1 Journal article
	Year	2017	Publication	Journal of cultural heritage	Abbreviated Journal	J Cult Herit
	Volume		Issue		Pages
	Keywords	A1 Journal article; Art; History; Electron microscopy for materials research (EMAT); Antwerp Cultural Heritage Sciences (ARCHES)
	Abstract	Technological developments such as atmospheric plasma jets for industry can be adapted for the conservation of cultural heritage. This application might offer a potential method for the removal or transformation of the corrosion on historical photographs. We focus on daguerreotypes and present an in-depth study of the induced changes by a multi-analytical approach using optical microscopy, scanning electron microscopy, different types of transmission electron microscopy and X-ray absorption fine structure. The H2-He afterglow removes S from an Ag2S or Cu2S layer which results in a nano-layer of metallic Ag or Cu on top of the deteriorated microstructure. In case the corrosion layer is composed of Cu-Ag-S compounds, our proposed setup can be used to partially remove the corrosion. These alterations of the corrosion results in an improvement in the readability of the photographic image.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000414230700007	Publication Date	2017-06-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1296-2074	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.838	Times cited	9	Open Access	Not_Open_Access
	Notes	The authors thank Herman Maes for the daguerreotypes used in this study. The authors also acknowledge the opportunity to perform XAFS measurements at the DUBBLE beamline of the ESRF storage ring under the approval of the advisory Committee (beam time nr. 26-01-990) and acknowledge the DUBBLE beamline staff for their support. They are also grateful for the financial support by the EU-FP7 grant PANNA no. 282998 and the STIMPRO project FFB150215 of the University of Antwerp. Pieter Tack is funded by a Ph.D. grant of the Agency for Innovation by Science and Technology (IWT).			Approved	Most recent IF: 1.838
	Call Number	EMAT @ emat @c:irua:144430			Serial	4625
Permanent link to this record