NANOlab Center of Excellence literature database -- Query Results

	NANOlab Center of Excellence literature database Home \| Show All \| Simple Search \| Advanced Search	Login Quick Search: Field: contains: ...
	31–60 of 91 records found matching your query (RSS):

Select All Deselect All

<< 1 2 3 4 >>

List View

Citations

Details

	Records
	Author	Ghosh, S.; Gaspari, R.; Bertoni, G.; Spadaro, M.C.; Prato, M.; Turner, S.; Cavalli, A.; Manna, L.; Brescia, R.
	Title	Pyramid-Shaped Wurtzite CdSe Nanocrystals with Inverted Polarity			Type	A1 Journal article
	Year	2015	Publication	ACS nano	Abbreviated Journal	Acs Nano
	Volume	9	Issue	9	Pages	8537-8546
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	We report on pyramid-shaped wurtzite cadmium selenide (CdSe) nanocrystals (NCs), synthesized by hot injection in the presence of chloride ions as shape-directing agents, exhibiting reversed crystal polarity compared to former reports. Advanced transmission electron microscopy (TEM) techniques (image-corrected high-resolution TEM with exit wave reconstruction and probe-corrected high-angle annular dark field-scanning TEM) unequivocally indicate that the triangular base of the pyramids is the polar (0001) facet and their apex points toward the [0001] direction. Density functional theory calculations, based on a simple model of binding of Cl(-) ions to surface Cd atoms, support the experimentally evident higher thermodynamic stability of the (0001) facet over the (0001) one conferred by Cl(-) ions. The relative stability of the two polar facets of wurtzite CdSe is reversed compared to previous experimental and computational studies on Cd chalcogenide NCs, in which no Cl-based chemicals were deliberately used in the synthesis or no Cl(-) ions were considered in the binding models. Self-assembly of these pyramids in a peculiar clover-like geometry, triggered by the addition of oleic acid, suggests that the basal (polar) facet has a density and perhaps type of ligands significantly different from the other three facets, since the pyramids interact with each other exclusively via their lateral facets. A superstructure, however with no long-range order, is observed for clovers with their (0001) facets roughly facing each other. The CdSe pyramids were also exploited as seeds for CdS pods growth, and the peculiar shape of the derived branched nanostructures clearly arises from the inverted polarity of the seeds.
	Address	Department of Nanochemistry, Istituto Italiano di Tecnologia (IIT) , via Morego 30, I-16163 Genova, Italy
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language	English	Wos	000360323300085	Publication Date	2015-07-23
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1936-0851;1936-086X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	13.942	Times cited	16	Open Access
	Notes	PMID:26203791			Approved	Most recent IF: 13.942; 2015 IF: 12.881
	Call Number	c:irua:127807			Serial	3956
Permanent link to this record



	Author	Sliem, M.A.; Turner, S.; Heeskens, D.; Kalidindi, S.B.; Van Tendeloo, G.; Muhler, M.; Fischer, R.A.
	Title	Preparation, microstructure characterization and catalytic performance of Cu/ZnO and ZnO/Cu composite nanoparticles for liquid phase methanol synthesis			Type	A1 Journal article
	Year	2012	Publication	Physical chemistry, chemical physics	Abbreviated Journal	Phys Chem Chem Phys
	Volume	14	Issue	22	Pages	8170-8178
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Stearate@Cu/ZnO nanocomposite particles with molar ratios of ZnO ∶ Cu = 2 and 5 are synthesized by reduction of the metalorganic Cu precursor [Cu{(OCH(CH3)CH2N(CH3)2)}2] in the presence of stearate@ZnO nanoparticles. In the case of ZnO ∶ Cu = 5, high-angle annular dark field-scanning transmission electron microscopy (HAADF-STEM) combined with electron-energy-loss-spectroscopy (EELS) as well as attenuated total reflection Fourier transform infrared (ATR-IR) spectroscopy are used to localize the small amount of Cu deposited on the surface of 35 nm sized stearate@ZnO particles. For ZnO ∶ Cu = 2, the microstructure of the nanocomposites after catalytic activity testing is characterized by HAADF-STEM techniques. This reveals the construction of large Cu nanoparticles (2050 nm) decorated by small ZnO nanoparticles (35 nm). The catalytic activity of both composites for the synthesis of methanol from syn gas is evaluated.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge	Editor
	Language		Wos	000304102200033	Publication Date	2012-04-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1463-9076;1463-9084;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.123	Times cited	16	Open Access
	Notes	Fwo			Approved	Most recent IF: 4.123; 2012 IF: 3.829
	Call Number	UA @ lucian @ c:irua:98377			Serial	2702
Permanent link to this record



	Author	Coeck, R.; Meeprasert, J.; Li, G.; Altantzis, T.; Bals, S.; Pidko, E.A.; De Vos, D.E.
	Title	Gold and silver-catalyzed reductive amination of aromatic carboxylic acids to benzylic amines			Type	A1 Journal article
	Year	2021	Publication	Acs Catalysis	Abbreviated Journal	Acs Catal
	Volume	11	Issue	13	Pages	7672-7684
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT); Applied Electrochemistry & Catalysis (ELCAT)
	Abstract	The reductive amination of benzoic acid and its derivatives would be an effective addition to current synthesis methods for benzylamine. However, with current technology it is very difficult to keep the aromaticity intact when starting from benzoic acid, and salt wastes are often generated in the process. Here, we report a heterogeneous catalytic system for such a reductive amination, requiring solely H-2 and NH3 as the reactants. The Ag/TiO2 or Au/TiO2 catalysts can be used multiple times, and very little noble metal is required, only 0.025 mol % Au. The catalysts are bifunctional: the support catalyzes the dehydration of both the ammonium carboxylate to the amide and of the amide to the nitrile, while the sites at the metal-support interface promote the hydrogenation of the in situ generated nitrile. Yields of up to 92% benzylamine were obtained.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000670659900005	Publication Date	2021-06-10
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2155-5435	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	10.614	Times cited	16	Open Access	OpenAccess
	Notes	R.C. thanks the FWO for his SB PhD fellowship. D.E.D.V. acknowledges FWO for research project funding, as well as KU Leuven for funding in the Metusalem program Casas. S.B. acknowledges support from the European Research Council (ERC Consolidator grant #815128 REALNANO). T.A. acknowledges funding from the University of Antwerp Research fund (BOF). E.A.P. acknowledges the support from the European Research Council (ERC Consolidator grant #725686 DeliCAT). J.M. acknowledges financial support through the Royal Thai Government Scholarship. DFT calculations on SURFsara supercomputer facilities were performed with support from the Netherlands Organization for Scientific Research (NWO).; sygmaSB			Approved	Most recent IF: 10.614
	Call Number	UA @ admin @ c:irua:179851			Serial	6840
Permanent link to this record



	Author	Pokatilov, E.P.; Fomin, V.M.; Balaban, S.N.; Gladilin, V.N.; Klimin, S.N.; Devreese, J.T.; Magnus, W.; Schoenmaker, W.; Collaert, N.; van Rossum, M.; de Meyer, K.
	Title	Distribution of fields and charge carriers in cylindrical nanosize silicon-based metal-oxide-semiconductor structures			Type	A1 Journal article
	Year	1999	Publication	Journal Of Applied Physics	Abbreviated Journal	J Appl Phys
	Volume	85	Issue		Pages	6625-6631
	Keywords	A1 Journal article; Electron Microscopy for Materials Science (EMAT);
	Abstract
	Address
	Corporate Author				Thesis
	Publisher	American Institute of Physics	Place of Publication	New York, N.Y.	Editor
	Language		Wos	000079871200053	Publication Date	2002-07-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0021-8979;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.068	Times cited	16	Open Access
	Notes				Approved	Most recent IF: 2.068; 1999 IF: 2.275
	Call Number	UA @ lucian @ c:irua:24444			Serial	743
Permanent link to this record



	Author	Volkova, N.E.; Lebedev, O.I.; Gavrilova, L.Y.; Turner, S.; Gauquelin, N.; Seikh, M.M.; Caignaert, V.; Cherepanov, V.A.; Raveau, B.; Van Tendeloo, G.
	Title	Nanoscale ordering in oxygen deficient quintuple perovskite Sm_2-\epsilonBa_3+\epsilonFe₅O_15-\delta : implication for magnetism and oxygen stoichiometry			Type	A1 Journal article
	Year	2014	Publication	Chemistry of materials	Abbreviated Journal	Chem Mater
	Volume	26	Issue	21	Pages	6303-6310
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The investigation of the system SmBaFe-O in air has allowed an oxygen deficient perovskite Sm2-epsilon Ba3+epsilon Fe5O15-delta (delta = 0.75, epsilon = 0.125) to be synthesized. In contrast to the XRPD pattern which gives a cubic symmetry (a(p) = 3.934 angstrom), the combined HREM/EELS study shows that this phase is nanoscale ordered with a quintuple tetragonal cell, a(p) X a(p) X 5(ap). The nanodomains exhibit a unique stacking sequence of the A-site cationic layers along the crystallographic c-axis, namely SmBaBa/SmBa/SmBaSm, and are chemically twinned in the three crystallographic directions. The nanoscale ordering of this perovskite explains its peculiar magnetic properties on the basis of antiferromagnetic interactions with spin blockade at the boundary between the nanodomains. The variation of electrical conductivity and oxygen content of this oxide versus temperature suggest potential SOFC applications. They may be related to the particular distribution of oxygen vacancies in the lattice and to the 3d(5)(L) under bar configuration of iron.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000344905600029	Publication Date	2014-10-07
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0897-4756;1520-5002;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	9.466	Times cited	16	Open Access
	Notes	The UrFU authors were financially supported by the Ministry of Education and Science of Russian Federation (project N 4.1039.2014/K) and by UrFU under the Framework Program of development of UrFU through the «Young scientists UrFU» competition. The CRISMAT authors gratefully acknowledge the EC, the CNRS and the French Minister of Education and Research for financial support through their Research, Strategic and Scholarship programs. This work was supported by funding from the European Research Council under the Seventh Framework Program (FP7), ERC grant N°246791 – COUNTATOMS. S.T. gratefully acknowledges the fund for scientific research Flanders for a post-doctoral fellowship and for financial support under contract number G004413N. N.G. acknowledges funding from the European Research Council under the 7th Framework Program (FP7), ERC starting grant number 278510 – VORTEX; ECASJO_;			Approved	Most recent IF: 9.466; 2014 IF: 8.354
	Call Number	UA @ lucian @ c:irua:122137			Serial	2269
Permanent link to this record



	Author	Rossell, M.D.; Lebedev, O.I.; Van Tendeloo, G.; Hayashi, N.; Terashima, T.; Takano, M.
	Title	Structure of epitaxial Ca₂Fe₂O₅ films deposited on different perovskite-type substrates			Type	A1 Journal article
	Year	2004	Publication	Journal of applied physics	Abbreviated Journal	J Appl Phys
	Volume	95	Issue	9	Pages	5145-5152
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher	American Institute of Physics	Place of Publication	New York, N.Y.	Editor
	Language		Wos	000220875400096	Publication Date	2004-04-14
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0021-8979;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.068	Times cited	16	Open Access
	Notes				Approved	Most recent IF: 2.068; 2004 IF: 2.255
	Call Number	UA @ lucian @ c:irua:54828			Serial	3310
Permanent link to this record



	Author	Batuk, D.; Hadermann, J.; Abakumov, A.; Vranken, T.; Hardy, A.; van Bael, M.; Van Tendeloo, G.
	Title	Layered perovskite-like Pb₂Fe₂O₅ structure as a parent matrix for the nucleation and growth of crystallographic shear planes			Type	A1 Journal article
	Year	2011	Publication	Inorganic chemistry	Abbreviated Journal	Inorg Chem
	Volume	50	Issue	11	Pages	4978-4986
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The Pb2Fe2O5 compound with a layered intergrowth structure has been prepared by a solid-state reaction at 700 °C. The incommensurate compound crystallizes in a tetragonal system with a = 3.9037(2) Å, c = 3.9996(4) Å, and q = 0.1186(4)c*, or when treated as a commensurate approximant, a = 3.9047(2) Å, c = 36.000(3) Å, space group I4/mmm. The crystal structure of Pb2Fe2O5 was resolved from transmission electron microscopy data. Atomic coordinates and occupancies of the cation positions were estimated from high-angle annular dark-field scanning transmission electron microscopy data. Direct visualization of the positions of the oxygen atoms was possible using annular bright-field scanning transmission electron microscopy. The structure can be represented as an intergrowth of perovskite blocks and partially disordered blocks with a structure similar to that of the Bi2O2 blocks in Aurivillius-type phases. The A-cation positions at the border of the perovskite block and the cation positions in the Aurivillius-type blocks are jointly occupied by Pb2+ and Fe3+ cations, resulting in a layer sequence along the c axis: PbOFeO2PbOFeO2Pb7/8Fe1/8O1xFe5/8Pb3/8O2Fe5/8Pb3/8. Upon heating, the layered Pb2Fe2O5 structure transforms into an anion-deficient perovskite modulated by periodically spaced crystallographic shear (CS) planes. Considering the layered Pb2Fe2O5 structure as a parent matrix for the nucleation and growth of CS planes allows an explanation of the specific microstructure observed for the CS structures in the PbFeO system.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Easton, Pa	Editor
	Language		Wos	000290978400038	Publication Date	2011-04-29
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0020-1669;1520-510X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.857	Times cited	16	Open Access
	Notes				Approved	Most recent IF: 4.857; 2011 IF: 4.601
	Call Number	UA @ lucian @ c:irua:90141			Serial	1809
Permanent link to this record



	Author	Schowalter, M.; Lamoen, D.; Kruse, P.; Gerthsen, D.; Rosenauer, A.
	Title	First-principles calculations of the mean inner Coulomb potential for sphalerite type II.VI semiconductors			Type	A1 Journal article
	Year	2004	Publication	Applied Physics Letters	Abbreviated Journal	Appl Phys Lett
	Volume	85	Issue	21	Pages	4938-4940
	Keywords	A1 Journal article; Electron Microscopy for Materials Science (EMAT);
	Abstract
	Address
	Corporate Author				Thesis
	Publisher	American Institute of Physics	Place of Publication	New York, N.Y.	Editor
	Language		Wos	000225300600037	Publication Date	2004-11-24
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0003-6951;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.411	Times cited	16	Open Access
	Notes				Approved	Most recent IF: 3.411; 2004 IF: 4.308
	Call Number	UA @ lucian @ c:irua:49657			Serial	1203
Permanent link to this record



	Author	Peeters, F.M.; Smondyrev, M.A.
	Title	Exact and approximate results for the polaron in one dimension			Type	A1 Journal article
	Year	1991	Publication	Physical review : B : condensed matter and materials physics	Abbreviated Journal	Phys Rev B
	Volume	43	Issue		Pages	4920-4924
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lancaster, Pa	Editor
	Language		Wos	A1991EY62300044	Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1098-0121; 0163-1829	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.736	Times cited	16	Open Access
	Notes				Approved	no
	Call Number	UA @ lucian @ c:irua:963			Serial	1104
Permanent link to this record



	Author	He, Z.; Lee, C.S.; Maurice, J.-L.; Pribat, D.; Haghi-Ashtiani, P.; Cojocaru, C.S.
	Title	Vertically oriented nickel nanorod/carbon nanofiber core/shell structures synthesized by plasma-enhanced chemical vapor deposition			Type	A1 Journal article
	Year	2011	Publication	Carbon	Abbreviated Journal	Carbon
	Volume	49	Issue	14	Pages	4710-4718
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Plasma-enhanced chemical vapor deposition, without a nickel-containing gaseous precursor, was used to synthesize continuous nickel (Ni) nanorods inside the hollow cavity of carbon nanofibers (CNFs), thus forming vertically aligned Ni/CNF core/shell structures. Scanning and transmission electron microscopic images indicate that the elongated Ni nanorods originate from the catalyst particles at the tips of the CNFs and that their formation is due to the effect of extrusion induced by the compressive force of the graphene layers during growth. Different from previous work, each vertically-aligned core/shell structure reported is totally isolated from its neighbors. Continuous Ni nanorods are found to separate into smaller ones with increasing growth time, which was ascribed to (i) the limited amount of Ni available in the tip of the CNF, (ii) the polycrystalline nature of the Ni nanorods and (iii) the combined effects of the compressive stresses on the side of the Ni nanorods and of the tensile stress along their axis.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000295308300010	Publication Date	2011-06-30
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0008-6223;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.337	Times cited	16	Open Access
	Notes				Approved	Most recent IF: 6.337; 2011 IF: 5.378
	Call Number	UA @ lucian @ c:irua:92782			Serial	3841
Permanent link to this record



	Author	Briers, J.; Eevers, W.; Cos, P.; Geise, H.J.; Mertens, R.; Nagels, P.; Zhang, X.B.; Van Tendeloo, G.; Herrebout, W.; van der Veken, B.
	Title	Molecular orientation and conductivity in highly oriented poly(p-phenylene vinylene)			Type	A1 Journal article
	Year	1994	Publication	Polymer	Abbreviated Journal	Polymer
	Volume	35	Issue		Pages	4569-4572
	Keywords	A1 Journal article; Molecular Spectroscopy (MolSpec); Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Guildford	Editor
	Language		Wos	A1994PM11600014	Publication Date	2003-06-21
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0032-3861;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.562	Times cited	16	Open Access
	Notes				Approved	no
	Call Number	UA @ lucian @ c:irua:8539			Serial	2180
Permanent link to this record



	Author	Yan, L.; Niu, H.; Bridges, C.A.; Marshall, P.A.; Hadermann, J.; Van Tendeloo, G.; Chalker, P.R.; Rosseinsky, M.J.
	Title	Unit-cell-level assembly of metastable transition-metal oxides by pulsed-laser deposition			Type	A1 Journal article
	Year	2007	Publication	Angewandte Chemie: international edition in English	Abbreviated Journal	Angew Chem Int Edit
	Volume	46	Issue	24	Pages	4539-4542
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Weinheim	Editor
	Language		Wos	000247500600026	Publication Date	2007-05-10
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1433-7851;1521-3773;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	11.994	Times cited	16	Open Access
	Notes				Approved	Most recent IF: 11.994; 2007 IF: 10.031
	Call Number	UA @ lucian @ c:irua:65593			Serial	3812
Permanent link to this record



	Author	Singh, S.K.; Costamagna, S.; Neek-Amal, M.; Peeters, F.M.
	Title	Melting of partially fluorinated graphene : from detachment of fluorine atoms to large defects and random coils			Type	A1 Journal article
	Year	2014	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	118	Issue	8	Pages	4460-4464
	Keywords	A1 Journal article; Engineering sciences. Technology; Condensed Matter Theory (CMT)
	Abstract	The melting of fluorographene is very unusual and depends strongly on the degree of fluorination. For temperatures below 1000 K, fully fluorinated graphene (FFG) is thermomechanically more stable than graphene but at T-m approximate to 2800 K FFG transits to random coils which is almost 2 times lower than the melting temperature of graphene, i.e., 5300 K. For fluorinated graphene up to 30% ripples causes detachment of individual F-atoms around 2000 K, while for 40%-60% fluorination large defects are formed beyond 1500 K and beyond 60% of fluorination F-atoms remain bonded to graphene until melting. The results agree with recent experiments on the dependence of the reversibility of the fluorination process on the percentage of fluorination.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000332188100069	Publication Date	2014-01-22
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447; 1932-7455	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	16	Open Access
	Notes	; This work was supported by the EU-Marie Curie IIF postdoc Fellowship/299855 (for M.N.-A.), the ESF-Eurographene project CONGRAN, and the Flemish Science Foundation (FWO-VI). Financial support from the Collaborative program MINCyT (Argentina)-FWO(Belgium) is also acknowledged. ;			Approved	Most recent IF: 4.536; 2014 IF: 4.772
	Call Number	UA @ lucian @ c:irua:128874			Serial	4600
Permanent link to this record



	Author	Ke, X.; Turner, S.; Quintana, M.; Hadad, C.; Montellano-López, A.; Carraro, M.; Sartorel, A.; Bonchio, M.; Prato, M.; Bittencourt, C.; Van Tendeloo, G.;
	Title	Dynamic motion of Ru-polyoxometalate ions (POMs) on functionalized few-layer graphene			Type	A1 Journal article
	Year	2013	Publication	Small	Abbreviated Journal	Small
	Volume	9	Issue	23	Pages	3922-3927
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The interaction and stability of Ru4POM on few layer graphene via functional groups is investigated by time-dependent imaging using aberration-corrected transmission electron microscopy. The Ru4POM demonstrates dynamic motion on the graphene surface with its frequency and amplitude of rotation related to the nature of the functional group used. The stability of the Ru4POMgraphene hybrid corroborates its long-term robustness when applied to multielectronic catalytic processes.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Weinheim	Editor
	Language		Wos	000331282400003	Publication Date	2013-07-01
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1613-6810;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	8.643	Times cited	16	Open Access
	Notes	IAP-7; Countatoms;			Approved	Most recent IF: 8.643; 2013 IF: 7.514
	Call Number	UA @ lucian @ c:irua:115768			Serial	763
Permanent link to this record



	Author	Bekaert, J.; Khestanova, E.; Hopkinson, D.G.; Birkbeck, J.; Clark, N.; Zhu, M.; Bandurin, D.A.; Gorbachev, R.; Fairclough, S.; Zou, Y.; Hamer, M.; Terry, D.J.; Peters, J.J.P.; Sanchez, A.M.; Partoens, B.; Haigh, S.J.; Milošević, M.V.; Grigorieva, I., V
	Title	Enhanced superconductivity in few-layer TaS₂ due to healing by oxygenation			Type	A1 Journal article
	Year	2020	Publication	Nano Letters	Abbreviated Journal	Nano Lett
	Volume	20	Issue	5	Pages	3808-3818
	Keywords	A1 Journal article; Engineering sciences. Technology; Condensed Matter Theory (CMT)
	Abstract	When approaching the atomically thin limit, defects and disorder play an increasingly important role in the properties of two-dimensional (2D) materials. While defects are generally thought to negatively affect superconductivity in 2D materials, here we demonstrate the contrary in the case of oxygenation of ultrathin tantalum disulfide (TaS2). Our first-principles calculations show that incorporation of oxygen into the TaS2 crystal lattice is energetically favorable and effectively heals sulfur vacancies typically present in these crystals, thus restoring the electronic band structure and the carrier density to the intrinsic characteristics of TaS2. Strikingly, this leads to a strong enhancement of the electron-phonon coupling, by up to 80% in the highly oxygenated limit. Using transport measurements on fresh and aged (oxygenated) few-layer TaS2, we found a marked increase of the superconducting critical temperature (T-c) upon aging, in agreement with our theory, while concurrent electron microscopy and electron-energy loss spectroscopy confirmed the presence of sulfur vacancies in freshly prepared TaS2 and incorporation of oxygen into the crystal lattice with time. Our work thus reveals the mechanism by which certain atomic-scale defects can be beneficial to superconductivity and opens a new route to engineer T-c in ultrathin materials.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000535255300114	Publication Date	2020-04-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1530-6984	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	10.8	Times cited	16	Open Access
	Notes	; This work was supported by Research Foundation-Flanders (FWO). J.Be. acknowledges support of a postdoctoral fellowship of the FWO. The computational resources and services used for the first-principles calculations in this work were provided by the VSC (Flemish Supercomputer Center), funded by the FWO and the Flemish Government-department EWI. S.J.H., D.H., and S.F. would like to thank the Engineering and Physical Sciences Research Council (EPSRC) U.K (grants EP/R031711/1, EP/P009050/1 and the Graphene NOWNANO CDT) and the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (grant agreement ERC-2016-STG-EvoluTEM-715502, the Hetero2D Synergy grant and EC-FET Graphene Flagship) for funding. We thank Diamond Light Source for access and support in use of the electron Physical Science Imaging Centre (Instrument E02 and proposal numbers EM19315 and MG21597) that contributed to the results presented here. ;			Approved	Most recent IF: 10.8; 2020 IF: 12.712
	Call Number	UA @ admin @ c:irua:170264			Serial	6507
Permanent link to this record



	Author	Vast, L.; Carpentier, L.; Lallemand, F.; Colomer, J.-F.; Van Tendeloo, G.; Fonseca, A.; Nagy, J.B.; Mekhalif, Z.; Delhalle, J.
	Title	Multiwalled carbon nanotubes functionalized with 7-octenyltrichlorosilane and n-octyltrichlorosilane: dispersion in Sylgard®184 silicone and Youngs modulus			Type	A1 Journal article
	Year	2009	Publication	Journal of materials science	Abbreviated Journal	J Mater Sci
	Volume	44	Issue	13	Pages	3476-3482
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Sylgard®184/multiwalled carbon nanotube (MWNT) composites have been prepared by in situ polymerization using purified and functionalized multiwalled carbon nanotubes (f-MWNTs) as fillers. Surface modification of the MWNTs has been carried out by silanization with 7-octenyltrichlorosilane (7OTCS) and n-octyltrichlorosilane (nOTCS). The modification and dispersion of the carbon nanotubes in composites were characterized by X-ray photoelectron spectroscopy (XPS), transmission electron spectroscopy (TEM), and high-resolution transmission electron spectroscopy (HRTEM). Youngs modulus results were derived from indentation testing. It is shown that the terminal-vinyl group of 7OTCS molecules plays an essential role for both the dispersion of the f-MWNTs in the composite and its mechanical properties. At loading as low as 0.2 wt%, the Youngs modulus is shown to increase up to 50%. This is interpreted as resulting from a combination of the good compatibility in the forming silicone matrix of the MWNTs coated with a siloxane network, on the one hand, and the covalent links created between the terminal-vinyl groups and the host matrix in formation, on the other hand.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000267153200022	Publication Date	2009-04-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-2461;1573-4803;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.599	Times cited	16	Open Access
	Notes	Iuap			Approved	Most recent IF: 2.599; 2009 IF: 1.471
	Call Number	UA @ lucian @ c:irua:77844			Serial	2245
Permanent link to this record



	Author	Michel, K.H.; Nikolaev, A.V.
	Title	Theory of distinct crystal structures of polymerized fullerides AC₆₀, A=K, Rb, Cs: the specific role of alkalis			Type	A1 Journal article
	Year	2000	Publication	Physical review letters	Abbreviated Journal	Phys Rev Lett
	Volume	85	Issue		Pages	3197-3200
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York, N.Y.	Editor
	Language		Wos	000089807800033	Publication Date	2002-07-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0031-9007;1079-7114;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	8.462	Times cited	16	Open Access
	Notes				Approved	Most recent IF: 8.462; 2000 IF: 6.462
	Call Number	UA @ lucian @ c:irua:34339			Serial	3615
Permanent link to this record



	Author	de Witte, H.; Vandervorst, W.; Gijbels, R.
	Title	Modeling of bombardment induced oxidation of silicon			Type	A1 Journal article
	Year	2001	Publication	Journal of applied physics	Abbreviated Journal	J Appl Phys
	Volume	89	Issue	5	Pages	3001-3011
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher	American Institute of Physics	Place of Publication	New York, N.Y.	Editor
	Language		Wos	000167133000077	Publication Date	2002-07-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0021-8979;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.068	Times cited	16	Open Access
	Notes				Approved	Most recent IF: 2.068; 2001 IF: 2.128
	Call Number	UA @ lucian @ c:irua:37253			Serial	2119
Permanent link to this record



	Author	Frangis, N.; van Landuyt, J.; Lartiprete, R.; Martelli, S.; Borsella, E.; Chiussi, S.; Castro, J.; Leon, B.
	Title	High resolution electron microscopy and X-ray photoelectron spectroscopy studies of heteroepitaxial Si_xGe_1-x alloys produced through laser induced processing			Type	A1 Journal article
	Year	1998	Publication	Applied physics letters	Abbreviated Journal	Appl Phys Lett
	Volume	72	Issue	22	Pages	2877-2879
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher	American Institute of Physics	Place of Publication	New York, N.Y.	Editor
	Language		Wos	000075273700034	Publication Date	2002-07-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0003-6951;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.411	Times cited	16	Open Access
	Notes				Approved	Most recent IF: 3.411; 1998 IF: 3.349
	Call Number	UA @ lucian @ c:irua:29684			Serial	1447
Permanent link to this record



	Author	Vagov, A.; Croitoru, M.D.; Axt, V.M.; Kuhn, T.; Peeters, F.M.
	Title	High pulse area undamping of Rabi oscillations in quantum dots coupled to phonons			Type	A1 Journal article
	Year	2006	Publication	Physica status solidi B – Basic solid state physics	Abbreviated Journal	Phys Status Solidi B
	Volume	243	Issue	10	Pages	2233-2240
	Keywords	A1 Journal article; Condensed Matter Theory (CMT); Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000239932300005	Publication Date	2006-07-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0370-1972;1521-3951;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.674	Times cited	16	Open Access
	Notes				Approved	Most recent IF: 1.674; 2006 IF: 0.967
	Call Number	UA @ lucian @ c:irua:60891			Serial	1440
Permanent link to this record



	Author	Iyikanat, F.; Yagmurcukardes, M.; Senger, R.T.; Sahin, H.
	Title	Tuning electronic and magnetic properties of monolayer \alpha-RuCl₃ by in-plane strain			Type	A1 Journal article
	Year	2018	Publication	Journal of materials chemistry C : materials for optical and electronic devices	Abbreviated Journal	J Mater Chem C
	Volume	6	Issue	8	Pages	2019-2025
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	By employing density functional theory-based methods, the structural, vibrational, electronic, and magnetic properties of monolayer -RuCl3 were investigated. It was demonstrated that ferromagnetic (FM) and zigzag-antiferromagnetic (ZZ-AFM) spin orders in the material have very close total energies with the latter being the ground state. We found that each Ru atom possesses a magnetic moment of 0.9 (B) and the material exhibits strong magnetic anisotropy. While both phases exhibit indirect gaps, the FM phase is a magnetic semiconductor and the ZZ-AFM phase is a non-magnetic semiconductor. The structural stability of the material was confirmed by phonon calculations. Moreover, dynamical analysis revealed that the magnetic order in the material can be monitored via Raman measurements of the crystal structure. In addition, the magnetic ground state of the material changes from ZZ-AFM to FM upon certain applied strains. Valence and conduction band-edges of the material vary considerably under in-plane strains. Owing to the stable lattice structure and unique and controllable magnetic properties, monolayer -RuCl3 is a promising material in nanoscale device applications.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000426483800015	Publication Date	2018-01-22
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2050-7526; 2050-7534	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	5.256	Times cited	16	Open Access
	Notes	; Computational resources were provided by TUBITAK ULAKBIM, High Performance and Grid Computing Center (TR-Grid e-Infrastructure). H. S. acknowledges financial support from TUBITAK under project number 116C073. H. S. also acknowledges support from Bilim Akademisi-The Science Academy, Turkey, under the BAGEP program. ;			Approved	Most recent IF: 5.256
	Call Number	UA @ lucian @ c:irua:149900UA @ admin @ c:irua:149900			Serial	4952
Permanent link to this record



	Author	Radaelli, P.G.; Marezio, M.; Tholence, J.L.; de Brion, S.; Santoro, A.; Huang, Q.; Capponi, J.J.; Chaillout, C.; Krekels, T.; Van Tendeloo, G.
	Title	Crystal structure of the double Hg-layer copper oxide superconductor (Hg, Pr)₂Ba₂(Y, Ca)Cu₂O_8-\delta as a function of doping			Type	A1 Journal article
	Year	1995	Publication	The journal of physics and chemistry of solids	Abbreviated Journal	J Phys Chem Solids
	Volume	56	Issue	10	Pages	1471-1478
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York, N.Y.	Editor
	Language		Wos	A1995RR95600025	Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-3697	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.853	Times cited	16	Open Access
	Notes				Approved	no
	Call Number	UA @ lucian @ c:irua:13323			Serial	573
Permanent link to this record



	Author	Radaelli, P.G.; Marezio, M.; Tholence, J.L.; Debrion, S.; Santoro, A.; Huang, Q.; Capponi, J.J.; Chaillout, C.; Krekels, T.; Van Tendeloo, G.
	Title	Crystal-structure of the double-hg-layer copper-oxide superconductor (Hg,Pr)₂Ba₂(Y,Ca)Cu₂O_8-\deltaas a function of doping			Type	A1 Journal article
	Year	1995	Publication	The journal of physics and chemistry of solids	Abbreviated Journal	J Phys Chem Solids
	Volume	56	Issue	10	Pages	1471-1478
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The crystal structure of the newly discovered double-Hg-layer copper oxide superconductor (Hg, Pr)(2)Ba-2(Y, Ca)Cu2O8-delta was studied as a function of chemical doping using neutron and electron diffraction and high-resolution transmission electron microscopy (HREM). Rietveld refinements of the structural parameters from neutron powder diffraction data indicate that the oxygen site O3 on the mercury plane is highly defective, being both partially occupied and displaced from the high-symmetry position. The variable concentration of oxygen vacancies partially compensates for the cation doping and, together with the O3 displacement field, makes some of the Hg atoms acquire an unusual pyramidal coordination. HREM images confirm that the structure is of the '2212' type, with very few defects. In some grains, faint superstructure reflections were evidenced by electron diffraction, suggesting that both the oxygen vacancies and the O3 displacement field may order at least on a local scale.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York, N.Y.	Editor
	Language		Wos	A1995RR95600025	Publication Date	2002-07-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-3697;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.853	Times cited	16	Open Access
	Notes				Approved	no
	Call Number	UA @ lucian @ c:irua:104423			Serial	574
Permanent link to this record



	Author	Van Hoorebeke, L.; Leroux, O.; Leroux, F.; Mastroberti, A.A.; Santos-Silva, F.; Van Loo, D.; Bagniewska-Zadworna, A.; Bals, S.; Popper, Z.A.; de Araujo Mariath, J.E.
	Title	Heterogeneity of silica and glycan-epitope distribution in epidermal idioblast cell walls in Adiantum raddianum laminae			Type	A1 Journal article
	Year	2013	Publication	Planta	Abbreviated Journal	Planta
	Volume	237	Issue	6	Pages	1453-1464
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Laminae of Adiantum raddianum Presl., a fern belonging to the family Pteridaceae, are characterised by the presence of epidermal fibre-like cells under the vascular bundles. These cells were thought to contain silica bodies, but their thickened walls leave no space for intracellular silica suggesting it may actually be deposited within their walls. Using advanced electron microscopy in conjunction with energy dispersive X-ray microanalysis we showed the presence of silica in the cell walls of the fibre-like idioblasts. However, it was specifically localised to the outer layers of the periclinal wall facing the leaf surface, with the thick secondary wall being devoid of silica. Immunocytochemical experiments were performed to ascertain the respective localisation of silica deposition and glycan polymers. Epitopes characteristic for pectic homogalacturonan and the hemicelluloses xyloglucan and mannan were detected in most epidermal walls, including the silica-rich cell wall layers. The monoclonal antibody, LM6, raised against pectic arabinan, labelled the silica-rich primary wall of the epidermal fibre-like cells and the guard cell walls, which were also shown to contain silica. We hypothesise that the silicified outer wall layers of the epidermal fibre-like cells support the lamina during cell expansion prior to secondary wall formation. This implies that silicification does not impede cell elongation. Although our results suggest that pectic arabinan may be implicated in silica deposition, further detailed analyses are needed to confirm this. The combinatorial approach presented here, which allows correlative screening and in situ localisation of silicon and cell wall polysaccharide distribution, shows great potential for future studies.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000319474200004	Publication Date	2013-02-21
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0032-0935;1432-2048;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.361	Times cited	16	Open Access
	Notes	We are grateful to the Laboratorio de Anatomia Vegetal of Universidade Federal do Rio Grande do Sul (UFRGS) and the Centro de Microscopia Eletronica (CME) of UFRGS. Thanks to Conselho Nacional de Desenvolvimento Cientifico e Tecnologico (CNPq) for the undergraduate degree grant provided (PIBIC) for the fourth author and research grant and support for the last one. The third author is grateful to Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior (CAPES) for providing financial support (PRODOC). We acknowledge Christiane de Queiroz Lopes and Moema Queiroz (CME) for the technical assistance. We are indebted to Paul Knox (Centre for Plant Sciences, University of Leeds, UK) for kindly providing the monoclonal antibodies used in this study. The Fund for Scientific Research-Flanders (FWO) is acknowledged for the doctoral grant to D. Van Loo (G.0100.08).			Approved	Most recent IF: 3.361; 2013 IF: 3.376
	Call Number	UA @ lucian @ c:irua:109641			Serial	1419
Permanent link to this record



	Author	Croitoru, M.D.; Gladilin, V.N.; Fomin, V.M.; Devreese, J.T.; Magnus, W.; Schoenmaker, W.; Sorée, B.
	Title	Quantum transport in a nanosize silicon-on-insulator metal-oxide-semiconductor field effect transistor			Type	A1 Journal article
	Year	2003	Publication	Journal of applied physics	Abbreviated Journal	J Appl Phys
	Volume	93	Issue		Pages	1230-1240
	Keywords	A1 Journal article; Theory of quantum systems and complex systems; Condensed Matter Theory (CMT); Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher	American Institute of Physics	Place of Publication	New York, N.Y.	Editor
	Language		Wos	000180134200069	Publication Date	2003-01-03
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0021-8979;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.068	Times cited	16	Open Access
	Notes				Approved	Most recent IF: 2.068; 2003 IF: 2.171
	Call Number	UA @ lucian @ c:irua:40874			Serial	2793
Permanent link to this record



	Author	Milat, O.; Krekels, T.; Van Tendeloo, G.; Amelinckx, S.
	Title	Ordering principles for tetrahedral chains in Ga- and Co-substituted YBCO intergrowths			Type	A1 Journal article
	Year	1993	Publication	Journal de physique: 1: physique générale, physique statistique, matière condensée, domaines interdisciplinaires	Abbreviated Journal
	Volume	3	Issue	5	Pages	1219-1234
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	A model for superstructure ordering in the <<chain>> layers of Ga (Co) substituted YBCO intergrowths with general formula (REO2)NSr2MCu2O5 (M = Co, Ga; n = 1, 2, ...) is proposed. By Ga or Co substitution for Cu, the structure of the <<chain>> layer changes : instead of the CuO4 planar squares, the chains consist of MO4 tetrahedra (M = Ga, Co) running along the [110] perovskite direction. The existing model for the Ga substituted <<123>> implies that all the chains are the same. Our new model is based on the results of Electron diffraction and High-resolution electron microscopy investigations. The model reveals the occurrence of two types of chains as a consequence of <<opposite>> ordering between neighbouring tetrahedra. The comer linked tetrahedra in each chain appear as alternatingly rotated in opposite sense, and a chain itself, as being displaced with respect to the underlying structure in one of two senses ; either forth (right) or back (left) along the chain direction. The regular alternation of chains of opposite type doubles the periodicity within a layer and induces the possibility for intrinsic disorder in the chain layer stacking sequence. The planar superstructure and a staggered stacking of the tetrahedral chain layers is found irrespective of the rest of the intergrowth structure. Superstructure ordering in the case of Co substitution is more perfect than for the Ga substitution.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Les Ulis	Editor
	Language		Wos	A1993LC96100012	Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1155-4304	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	16	Open Access
	Notes				Approved	no
	Call Number	UA @ lucian @ c:irua:102980			Serial	2509
Permanent link to this record



	Author	Abakumov, A.M.; Rozova, M.G.; Antipov, E.V.; Hadermann, J.; Van Tendeloo, G.; Lobanov, M.V.; Greenblatt, M.; Croft, M.; Tsiper, E.V.; Llobet, A.; Lokshin, K.A.; Zhao, Y.
	Title	Synthesis, cation ordering, and magnetic properties of the (Sb_1-xPb_x)₂(Mn_1-ySb_y)O₄ solid solutions with the Sb₂MnO₄-type structure			Type	A1 Journal article
	Year	2005	Publication	Chemistry of materials	Abbreviated Journal	Chem Mater
	Volume	17	Issue		Pages	1123-1134
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000227421300029	Publication Date	2005-03-01
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0897-4756;1520-5002;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	9.466	Times cited	16	Open Access
	Notes	Iap V-1			Approved	Most recent IF: 9.466; 2005 IF: 4.818
	Call Number	UA @ lucian @ c:irua:51440			Serial	3446
Permanent link to this record



	Author	de Backer, J.W.; Vos, W.G.; Burnell, P.; Verhulst, S.L.; Salmon, P.; de Clerck, N.; de Backer, W.
	Title	Study of the variability in upper and lower airway morphology in Sprague-Dawley rats using modern micro-CT scan-based segmentation techniques			Type	A1 Journal article
	Year	2009	Publication	The anatomical record: advances in integrative anatomy and evolutionary biology	Abbreviated Journal	Anat Rec
	Volume	292	Issue	5	Pages	720-727
	Keywords	A1 Journal article; Condensed Matter Theory (CMT); Laboratory Experimental Medicine and Pediatrics (LEMP)
	Abstract	Animal models are being used extensively in pre-clinical and safety assessment studies to assess the effectiveness and safety of new chemical entities and delivery systems. Although never entirely replacing the need for animal testing, the use of computer simulations could eventually reduce the amount of animals needed for research purposes and refine the data acquired from the animal studies. Computational fluid dynamics is a powerful tool that makes it possible to simulate flow and particle behavior in animal or patient-specific respiratory models, for purposes of inhaled delivery. This tool requires an accurate representation of the respiratory system, respiration and dose delivery attributes. The aim of this study is to develop a representative airway model of the Sprague-Dawley rat using static and dynamic micro-CT scans. The entire respiratory tract was modeled, from the snout and nares down to the central airways at the point where no distinction could be made between intraluminal air and the surrounding tissue. For the selection of the representative model, variables such as upper airway movement, segmentation length, airway volume and size are taken into account. Dynamic scans of the nostril region were used to illustrate the characteristic morphology of this region in anaesthetized animals. It could be concluded from this study that it was possible to construct a highly detailed representative model of a Sprague-Dawley rat based on imaging modalities such as micro-CT scans
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York, N.Y.	Editor
	Language		Wos	000265766000010	Publication Date	2009-03-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-8486;1932-8494;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.431	Times cited	16	Open Access
	Notes				Approved	Most recent IF: 1.431; 2009 IF: 1.490
	Call Number	UA @ lucian @ c:irua:76455			Serial	3342
Permanent link to this record



	Author	Muto, S.; Merk, N.; Schryvers, D.; Tanner, L.E.
	Title	Displacive-replacive phase transformation in a Ni_62.5Al_37.5 phase studies by HREM and microdiffraction			Type	A1 Journal article
	Year	1993	Publication	Philosophical magazine: B: physics of condensed matter: electronic, optical and magnetic properties	Abbreviated Journal
	Volume	67	Issue	5	Pages	673-689
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The structure of the metastable Ni2Al phase, which has long been a matter of controversy, has been carefully re-examined by means of high-resolution transmission electron microscopy (HREM) and electron microdiffraction. First, it is concluded that theas-quenched NixAl100-x(60 less-than-or-equal-to x less-than-or-equal-to 65) material already exhibits a partial omega-type collapse in a one-dimensional fashion which and is consistent with the anomalous dip in the phonon dispersion curve. Ni2Al precipitates are formed on annealing by thermal decomposition of the high-temperature NixAl100-xB2 phase and still retain the small omega-type shuffle. The amount of displacement in the well developed Ni2Al phase was estimated to be between 20 and 50% of the ideal omega collapse; this was determined by means of a combined technique of HREM and microdiffraction together with dynamical calculations of HREM images and diffraction intensities.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	A1993LF72000005	Publication Date	2007-07-08
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1364-2812;1463-6417;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	16	Open Access
	Notes				Approved	no
	Call Number	UA @ lucian @ c:irua:6776			Serial	740
Permanent link to this record



	Author	Van Tendeloo, L.; Wangermez, W.; Vandekerkhove, A.; Willhammar, T.; Bals, S.; Maes, A.; Martens, J.A.; Kirschhock, C.E.A.; Breynaert, E.
	Title	Postsynthetic high-alumina zeolite crystal engineering in organic free hyper-alkaline media			Type	A1 Journal article
	Year	2017	Publication	Chemistry of materials	Abbreviated Journal	Chem Mater
	Volume	29	Issue	29	Pages	629-638
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Postsynthetic modification of high -alumina zeolites in hyper alkaline media can be tailored toward alteration of framework topology, crystal size and morphology, or desired Si/A1 ratio. FAU, EMT, MAZ, KFI, HEU, and LTA starting materials were treated with 1.2 M MOH (M = Na, K, RE, or Cs), leading to systematic ordered porosity or fully transformed frameworks with new topology and adjustable Si/Al ratio. In addition to the versatility of this tool for zeolite crystal engineering, these alterations improve understanding of the crystal chemistry. Such knowledge can guide further development in zeolite crystal engineering. Postsynthetic alteration also provides insight on the long-term stability of aluminosilicate zeolites that are used as a sorption sink in concrete -based waste disposal facilities in harsh alkaline conditions.
	Address
	Corporate Author				Thesis
	Publisher	American Chemical Society	Place of Publication	Washington, D.C	Editor
	Language		Wos	000392891700021	Publication Date	2016-12-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0897-4756	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	9.466	Times cited	16	Open Access	OpenAccess
	Notes	; This work was supported by long-term structural funding by the Flemish Government (Methusalem grant of Prof. J. Martens) and by ONDRAF/NIRAS, the Belgian Agency for Radioactive Waste and Fissile Materials, as part of the program on surface disposal of Belgian Category A waste. The Belgian government is acknowledged for financing the interuniversity poles of attraction (IAP-PAI). S.B. acknowledges financial support from European Research Council (ERC Advanced Grant No. 24691-COUNTATOMS, ERC Starting Grant No. 335078-COLOURATOMS). ; Ecas_Sara			Approved	Most recent IF: 9.466
	Call Number	UA @ lucian @ c:irua:152674UA @ admin @ c:irua:152674			Serial	5145
Permanent link to this record