NANOlab Center of Excellence literature database -- Query Results

	NANOlab Center of Excellence literature database Home \| Show All \| Simple Search \| Advanced Search	Login Quick Search: Field: contains: ...
	1–30 of 377 records found matching your query (RSS \| history):

Select All Deselect All

<< 1 2 3 4 5 6 7 8 9 10 11 12 13 >>

List View

Citations

Details

	Records
	Author	Bittencourt, C.; Hitchock, A.P.; Ke, X.; Van Tendeloo, G.; Ewels, C.P.; Guttmann, P.
	Title	X-ray absorption spectroscopy by full-field X-ray microscopy of a thin graphite flake: Imaging and electronic structure via the carbon K-edge			Type	A1 Journal article
	Year	2012	Publication	Beilstein journal of nanotechnology	Abbreviated Journal	Beilstein J Nanotech
	Volume	3	Issue		Pages	345-350
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	We demonstrate that near-edge X-ray-absorption fine-structure spectra combined with full-field transmission X-ray microscopy can be used to study the electronic structure of graphite flakes consisting of a few graphene layers. The flake was produced by exfoliation using sodium cholate and then isolated by means of density-gradient ultracentrifugation. An image sequence around the carbon K-edge, analyzed by using reference spectra for the in-plane and out-of-plane regions of the sample, is used to map and spectrally characterize the flat and folded regions of the flake. Additional spectral features in both π and σ regions are observed, which may be related to the presence of topological defects. Doping by metal impurities that were present in the original exfoliated graphite is indicated by the presence of a pre-edge signal at 284.2 eV.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000303243400001	Publication Date	2012-04-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2190-4286;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.127	Times cited	15	Open Access
	Notes				Approved	Most recent IF: 3.127; 2012 IF: 2.374
	Call Number	UA @ lucian @ c:irua:97703			Serial	3924
Permanent link to this record



	Author	Neyts, E.C.
	Title	PECVD growth of carbon nanotubes : from experiment to simulation			Type	A1 Journal article
	Year	2012	Publication	Journal of vacuum science and technology: B: micro-electronics processing and phenomena	Abbreviated Journal
	Volume	30	Issue	3	Pages	030803-030803,17
	Keywords	A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Nanostructured carbon materials show a tremendous variety in atomic structure, morphology, properties, and applications. As all properties are ultimately determined by the structure of the material, a thorough understanding of the growth mechanisms that give rise to the particular structure is critical. On many occasions, it has been shown that plasma enhanced growth can be strongly beneficial. This review will describe the authors current understanding of plasma enhanced growth of carbon nanotubes, the prototypical example of nanostructured carbon materials, as obtained from experiments, simulations, and modeling. Specific emphasis is put on where experiments and computational approaches correspond, and where they differ. Also, the current status on simulating PECVD growth of some other carbon nanomaterials is reviewed, including amorphous carbon, graphene, and metallofullerenes. Finally, computational challenges with respect to the simulation of PECVD growth are identified.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York, N.Y.	Editor
	Language		Wos	000305042000010	Publication Date	2012-04-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2166-2746;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	42	Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:97166			Serial	2570
Permanent link to this record



	Author	Zhao, S.-X.; Gao, F.; Wang, Y.-N.; Bogaerts, A.
	Title	The effect of F₂ attachment by low-energy electrons on the electron behaviour in an Ar/CF₄ inductively coupled plasma			Type	A1 Journal article
	Year	2012	Publication	Plasma sources science and technology	Abbreviated Journal	Plasma Sources Sci T
	Volume	21	Issue	2	Pages	025008-025008,13
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	The electron behaviour in an Ar/CF4 inductively coupled plasma is investigated by a Langmuir probe and a hybrid model. The simulated and measured results include electron density, temperature and electron energy distribution function for different values of Ar/CF4 ratio, coil power and gas pressure. The hybrid plasma equipment model simulations show qualitative agreement with experiment. The effect of F2 electron attachment on the electron behaviour is explored by comparing two sets of data based on different F atom boundary conditions. It is demonstrated that electron attachment at F2 molecules is responsible for the depletion of low-energy electrons, causing a density decrease as well as a temperature increase when CF4 is added to an Ar plasma.
	Address
	Corporate Author				Thesis
	Publisher	Institute of Physics	Place of Publication	Bristol	Editor
	Language		Wos	000302779400022	Publication Date	2012-03-12
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0963-0252;1361-6595;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.302	Times cited	23	Open Access
	Notes				Approved	Most recent IF: 3.302; 2012 IF: 2.515
	Call Number	UA @ lucian @ c:irua:96549			Serial	841
Permanent link to this record



	Author	Delabie, A.; Sioncke, S.; Rip, J.; Van Elshocht, S.; Pourtois, G.; Mueller, M.; Beckhoff, B.; Pierloot, K.
	Title	Reaction mechanisms for atomic layer deposition of aluminum oxide on semiconductor substrates			Type	A1 Journal article
	Year	2012	Publication	Journal of vacuum science and technology: A: vacuum surfaces and films	Abbreviated Journal	J Vac Sci Technol A
	Volume	30	Issue	1	Pages	01a127-01a127,10
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	In this work, we have studied the TMA/H(2)O (TMA Al(CH(3))(3)) atomic layer deposition (ALD) of Al(2)O(3) on hydroxyl (OH) and thiol (SH) terminated semiconductor substrates. Total reflection x-ray fluorescence reveals a complex growth-per-cycle evolution during the early ALD reaction cycles. OH and SH terminated surfaces demonstrate growth inhibition from the second reaction cycle on. Theoretical calculations, based on density functional theory, are performed on cluster models to investigate the first TMA/H(2)O reaction cycle. Based on the theoretical results, we discuss possible mechanisms for the growth inhibition from the second reaction cycle on. In addition, our calculations show that AlCH(3) groups are hydrolyzed by a H(2)O molecule adsorbed on a neighboring Al atom, independent of the type of backbonds (Si-O, Ge-O, or Ge-S) of AlCH(3). The coordination of Al remains four-fold after the first TMA/H(2)O reaction cycle. (C) 2012 American Vacuum Society. [DOI: 10.1116/1.3664090]
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York, N.Y.	Editor
	Language		Wos	000298992800027	Publication Date	2011-12-02
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0734-2101;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.374	Times cited	41	Open Access
	Notes				Approved	Most recent IF: 1.374; 2012 IF: 1.432
	Call Number	UA @ lucian @ c:irua:96253			Serial	2818
Permanent link to this record



	Author	Vanhellemont, J.; Romano Rodriguez, A.; Fedina, L.; van Landuyt, J.; Aseev, A.
	Title	Point defect reactions in silicon studied in situ by high flux electron irradiation in high voltage transmission electron microscope			Type	A1 Journal article
	Year	1995	Publication	Materials science and technology	Abbreviated Journal	Mater Sci Tech-Lond
	Volume	11	Issue	11	Pages	1194-1202
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Results are presented of in situ studies of 1 MeV electron irradiation induced (113) defect generation in silicon containing different types and concentrations of extrinsic point defects. A semiquantitative model is developed describing the influence of interfaces and stress fields and of extrinsic point defects on the (113) defect generation in silicon during irradiation. The theoretical results obtained are correlated with experimental data obtained on silicon uniformly doped with boron and phosphorus and with observations obtained by irradiating cross-sectional samples of wafers with highly doped surface layers. It is shown that in situ irradiation in a high voltage election microscope is a powerful tool for studying local point defect reactions in silicon. (C) 1995 The Institute of Materials.
	Address
	Corporate Author				Thesis
	Publisher	Inst Materials	Place of Publication	London	Editor
	Language		Wos	A1995TQ95100016	Publication Date	2014-01-09
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0267-0836;1743-2847;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	0.995	Times cited	7	Open Access
	Notes				Approved	no
	Call Number	UA @ lucian @ c:irua:95911			Serial	2654
Permanent link to this record



	Author	Wu, Z.; Zhang, Z.Z.; Chang, K.; Peeters, F.M.
	Title	Quantum tunneling through graphene nanorings			Type	A1 Journal article
	Year	2010	Publication	Nanotechnology	Abbreviated Journal	Nanotechnology
	Volume	21	Issue	18	Pages	185201
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	We investigate theoretically quantum transport through graphene nanorings in the presence of a perpendicular magnetic field. Our theoretical results demonstrate that the graphene nanorings behave like a resonant tunneling device, contrary to the Aharonov-Bohm oscillations found in conventional semiconductor rings. The resonant tunneling can be tuned by the Fermi energy, the size of the central part of the graphene nanorings and the external magnetic field.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Bristol	Editor
	Language		Wos	000276672100005	Publication Date	2010-04-15
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0957-4484;1361-6528;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.44	Times cited	34	Open Access
	Notes	; This work is partly supported by the NSFC, the project from the Chinese Academy of Sciences, the bilateral project between China and Sweden, the Flemish Science Foundation (FWLO-Vl) and the Belgium Science Policy (IAP). ;			Approved	Most recent IF: 3.44; 2010 IF: 3.652
	Call Number	UA @ lucian @ c:irua:95614			Serial	2796
Permanent link to this record



	Author	Tan, H.; Lebedev, O.I.; McLaughlin, A.C.; Van Tendeloo, G.
	Title	The superstructure and superconductivity of Ru1222 based RuSr₂Gd_2-x-yY_yCe_xCu₂O_10-\delta compounds			Type	A1 Journal article
	Year	2010	Publication	Superconductor science and technology	Abbreviated Journal	Supercond Sci Tech
	Volume	23	Issue	11	Pages	115013-115013,8
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	For the first time, the local structure and physical properties of Ru1222 based compounds (RuSr(2)Gd(1.4)Ce(0.6)Cu(2)O(10-delta) and RuSr(2)Gd(1.8-x)Y(0.2)CexCu(2)O(10) (x = 0.90-0.55)) have been investigated and analyzed together on the very same compounds. The Ru1222 superstructure was confirmed by TEM at a local scale and was suggested to have an orthorhombic symmetry with space group Aba2 and lattice parameters a(s) similar or equal to root 2a, b(s) similar or equal to root 2a and c(s) = c. This new Ru1222 superstructure distortion from tetragonal symmetry is proposed to have a positive correlation with the superconductivity variation of these compounds. The more the distortion towards orthorhombic symmetry, the higher the critical superconducting temperature these compounds can achieve. The T(c)(0) of RuSr(2)Gd(1.8-x)Y(0.2)Ce(x)Cu(2)O(10-delta) (x = 0.85-0.55) increases monotonically from 4 to 16 K when x decreases from 0.85 to 0.70, then RuSr(2)Gd(2)Cu(2)O(8) defects emerge and the T(c) decreases with decreasing x. Ru1212 defects are observed to intergrow epitaxially with the Ru1222 structure as lamellas along the c-axis in RuSr(2)Gd(1.4)Ce(0.6)Cu(2)O(10-delta). Although Ru1212 is a superconductor, the intergrowth severely restrains its superconductivity.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Bristol	Editor
	Language		Wos	000284308000013	Publication Date	2010-10-09
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0953-2048;1361-6668;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.878	Times cited	1	Open Access
	Notes	Fwo; Esteem 026019			Approved	Most recent IF: 2.878; 2010 IF: 2.402
	Call Number	UA @ lucian @ c:irua:95553			Serial	3385
Permanent link to this record



	Author	Kalitzova, M.; Vlakhov, E.; Marinov, Y.; Gesheva, K.; Ignatova, V.A.; Lebedev, O.; Muntele, C.; Gijbels, R.
	Title	Effect of high-frequency electromagnetic field on Te⁺-implanted (001) Si</tex>			Type	A1 Journal article
	Year	2004	Publication	Vacuum: the international journal and abstracting service for vacuum science and technology	Abbreviated Journal	Vacuum
	Volume	76	Issue	2-3	Pages	325-328
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	The analysis of high-frequency electromagnetic field (HFEMF) effects on the microstructure and electrical properties of Te+ implanted (0 0 1) Si is reported. Cross-sectional high-resolution transmission electron microscopy (XHRTEM) demonstrates the formation of Te nanoclusters (NCs) embedded in the Si layer amorphized by implantation (a-Si) at fluences greater than or equal to 1 x 10(16) cm(-2). Post-implantation treatment with 0.45 MHz HFEMF leads to enlargement of Te NCs, their diffusion and accumulation at the a-Si surface and formation of laterally connected extended tellurium structures above the percolation threshold, appearing at an ion fluence of 1 x 10(17) cm(-2). AC electrical conductivity measurements show nearly four orders of magnitude decrease of impedance resistivity in this case, which is in good agreement with the results of our structural studies. The results obtained are discussed in terms of the two-phase isotropic spinodal structure. (C) 2004 Elsevier Ltd. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000224890100048	Publication Date	2004-08-21
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0042-207X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.53	Times cited	2	Open Access
	Notes				Approved	Most recent IF: 1.53; 2004 IF: 0.902
	Call Number	UA @ lucian @ c:irua:95105			Serial	814
Permanent link to this record



	Author	Kindratenko, V.V.; van Espen, P.J.M.; Treiger, B.A.; Van Grieken, R.E.
	Title	Fractal dimensional classification of aerosol particles by computer-controlled scanning electron microscopy			Type	A1 Journal article
	Year	1994	Publication	Environmental science and technology	Abbreviated Journal
	Volume	28	Issue		Pages	2197-2202
	Keywords	A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation); Chemometrics (Mitac 3)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	A1994PP82900033	Publication Date	2007-05-30
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0013-936x; 1520-5851	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:9497			Serial	7983
Permanent link to this record



	Author	Mattauch, S.; Heger, G.; Michel, K.H.
	Title	High resolution neutron and X-ray diffraction studies as a function of temperature and electric field of the ferroelectric phase transition of RDP			Type	A1 Journal article
	Year	2004	Publication	Crystal research and technology	Abbreviated Journal	Cryst Res Technol
	Volume	39	Issue	12	Pages	1027-1054
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	Neutron and high resolution X-ray diffraction investigations on perfect single crystals of RbH2PO4 (RDP), a hydrogen bonded ferroelectric of KDP type are reported. The results of crystal structure analysis from diffraction data, below and above the paraelectric – ferroelectric phase transition, support a disorder – order character Of [PO4H2](-)-groups. The tetragonal symmetry of the paraelectric phase with the double well potential of the hydrogen atoms obtained by diffraction, results simply from a time-space average of orthorhombic symmetry. According to the group – subgroup relation between the tetragonal space group 142d and the orthorhombic Fdd2 a short range order of ferroelectric clusters in the tetragonal phase is observed. With decreasing temperature the ferroelectric clusters increase and the long range interaction between their local polarisation vectors leads to the formation of lamellar ferroelectric domains with alternating polarisation directions at T-C = 147 K. From the high resolution X-ray data it is concluded that below T-C the ferroelastic strain in the (a,b)-plane leads to micro-angle grain boundaries at the domain walls. The tilt angle is enhanced by an applied electric field parallel to the ferroelectric axis. The resulting dislocations at the domain walls persist in the paraelectric phase leading to a memory effect for the arrangement of twin lamellae. With increased electric field the phase transition temperature T-C is decreased.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Berlin	Editor
	Language		Wos	000225681100001	Publication Date	2004-11-12
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0232-1300;1521-4079;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1	Times cited	12	Open Access
	Notes				Approved	Most recent IF: 1; 2004 IF: 0.770
	Call Number	UA @ lucian @ c:irua:94785			Serial	1459
Permanent link to this record



	Author	Helm, M.; Hilber, W.; Fromherz, T.; Peeters, F.M.; Alavi, K.; Pathak, R.N.
	Title	Bloch and localized electrons in semiconductor superlattices			Type	A1 Journal article
	Year	1994	Publication	Semiconductor science and technology	Abbreviated Journal	Semicond Sci Tech
	Volume	9	Issue		Pages	1989-1993
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	A1994PT27100023	Publication Date	2002-08-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0268-1242;1361-6641;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.19	Times cited	1	Open Access
	Notes				Approved	no
	Call Number	UA @ lucian @ c:irua:9370			Serial	244
Permanent link to this record



	Author	Ray, S.; Kolen'ko, Y.V.; Kovnir, K.A.; Lebedev, O.I.; Turner, S.; Chakraborty, T.; Erni, R.; Watanabe, T.; Van Tendeloo, G.; Yoshimura, M.; Itoh, M.
	Title	Defect controlled room temperature ferromagnetism in Co-doped barium titanate nanocrystals			Type	A1 Journal article
	Year	2012	Publication	Nanotechnology	Abbreviated Journal	Nanotechnology
	Volume	23	Issue	2	Pages	025702,1-025702,10
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Defect mediated high temperature ferromagnetism in oxide nanocrystallites is the central feature of this work. Here, we report the development of room temperature ferromagnetism in nanosized Co-doped barium titanate particles with a size of around 14 nm, synthesized by a solvothermal drying method. A combination of x-ray diffraction with state-of-the-art electron microscopy techniques confirms the intrinsic doping of Co into BaTiO3. The development of the room temperature ferromagnetism was tracked down to the different donor defects, namely hydroxyl groups at the oxygen site (\mathrm {OH}_{\mathrm {(O)}}
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Bristol	Editor
	Language		Wos	000298409000011	Publication Date	2011-12-14
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0957-4484;1361-6528;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.44	Times cited	19	Open Access
	Notes	Esteem 026019; Fwo			Approved	Most recent IF: 3.44; 2012 IF: 3.842
	Call Number	UA @ lucian @ c:irua:93636			Serial	614
Permanent link to this record



	Author	Huyskens, C.; Lenaerts, S.; Brauns, E.; Diels, L.; de Wever, H.
	Title	Study of (ir)reversible fouling in MBRs under various operating conditions using new on-line fouling sensor			Type	A1 Journal article
	Year	2011	Publication	Separation and purification technology	Abbreviated Journal	Sep Purif Technol
	Volume	81	Issue	2	Pages	208-215
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	In this study, a new fouling sensor was validated under different conditions of hydraulic (HRT) and sludge retention time (SRT). The MBR-VFM (membrane bioreactor-VITO Fouling Measurement) allows the simultaneous determination of the physically reversible and irreversible fouling potential of a mixed liquor during a single crossflow filtration test. In accordance with the on-line filtration behavior, the measured reversible and irreversible fouling propensities differed significantly between MBRs operated at different combinations of HRT-SRT. Moreover, a significant negative correlation was found between the on-line permeability and the reversible and irreversible fouling propensity measured by the MBR-VFM. This corresponded to observations made on membrane recovery after physical or chemical cleaning actions. Higher reversible and irreversible fouling were observed at lower HRT, presumably as a consequence of increased concentrations of foulants present. The effect of SRT was much smaller and restricted to the reversible fouling component. Possible explanations for the increased fouling at prolonged SRT are the higher sludge and colloid concentration and the smaller floc size. It can be concluded that the MBR-VFM is a useful tool to monitor fluctuations in a mixed liquors (ir)reversible fouling potential and can contribute to a deeper understanding of the occurring fouling phenomena.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000296108500012	Publication Date	2011-08-01
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1383-5866	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.359	Times cited	15	Open Access
	Notes	; ;			Approved	Most recent IF: 3.359; 2011 IF: 2.921
	Call Number	UA @ admin @ c:irua:93410			Serial	5992
Permanent link to this record



	Author	Talgorn, E.; Gao, Y.; Aerts, M.; Kunneman, L.T.; Schins, J.M.; Savenije, T.J.; van Huis, M.A.; van der Zant, H.S.J.; Houtepen, A.J.; Siebbeles, L.D.A.
	Title	Unity quantum yield of photogenerated charges and band-like transport in quantum-dot solids			Type	A1 Journal article
	Year	2011	Publication	Nature nanotechnology	Abbreviated Journal	Nat Nanotechnol
	Volume	6	Issue	11	Pages	733-739
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Solid films of colloidal quantum dots show promise in the manufacture of photodetectors and solar cells. These devices require high yields of photogenerated charges and high carrier mobilities, which are difficult to achieve in quantum-dot films owing to a strong electronhole interaction and quantum confinement. Here, we show that the quantum yield of photogenerated charges in strongly coupled PbSe quantum-dot films is unity over a large temperature range. At high photoexcitation density, a transition takes place from hopping between localized states to band-like transport. These strongly coupled quantum-dot films have electrical properties that approach those of crystalline bulk semiconductors, while retaining the size tunability and cheap processing properties of colloidal quantum dots.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000296737300012	Publication Date	2011-09-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1748-3387;1748-3395;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	38.986	Times cited	129	Open Access
	Notes				Approved	Most recent IF: 38.986; 2011 IF: 27.270
	Call Number	UA @ lucian @ c:irua:93296			Serial	3813
Permanent link to this record



	Author	Potgieter-Vermaak, S.S.; Mmari, A.; Van Grieken, R.; McCrindle, R.I.; Potgieter, J.H.
	Title	Degradation of galvanised iron roofing material in Tanzania by atmospheric corrosion			Type	A1 Journal article
	Year	2011	Publication	Corrosion engineering science and technology	Abbreviated Journal
	Volume	46	Issue	5	Pages	642-650
	Keywords	A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation)
	Abstract	Galvanised iron is popular in many applications, particular as a roofing material. However, just like other materials, especially metallic ones, it is prone to degradation by corrosion. In this particular study, the degradation of galvanised roof sheets was investigated at a coastal, urban and rural site in Tanzania, Africa. Samples were exposed to various outdoor environments over a period of 3 years. In addition, some accelerated laboratory investigations were conducted in different simulated air pollution environments in an artificial corrosion chamber constructed for this purpose to supplement the outdoor exposure tests. It was found that the combination of the tropical climate and increasing air pollution due to industrial development in the capital Dar-es-Salaam resulted in substantial atmospheric corrosion of the roof sheets, which eventually leads to failure and the necessity for replacement. The rural site had the lowest degree of atmospheric corrosion as expected. A combination of different corrosion products was identified as a result of the atmospheric corrosion by Raman and EDX analyses. The information gained from this investigation could be utilised to construct more durable structures requiring less frequent replacement and maintenance in future.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000294421100008	Publication Date	2010-04-12
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1478-422x	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:92094			Serial	7758
Permanent link to this record



	Author	Orlinskii, S.B.; Bogomolov, R.S.; Kiyamova, A.M.; Yavkin, B.V.; Mamin, G.M.; Turner, S.; Van Tendeloo, G.; Shiryaev, A.A.; Vlasov, I.I.; Shenderova, O.
	Title	Identification of substitutional nitrogen and surface paramagnetic centers in nanodiamond of dynamic synthesis by electron paramagnetic resonance			Type	A1 Journal article
	Year	2011	Publication	Nanoscience and nanotechnology letters	Abbreviated Journal	Nanosci Nanotech Let
	Volume	3	Issue	1	Pages	63-67
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Production of nanodiamond particles containing substitutional nitrogen is important for a wide variety of advanced applications. In the current work nanodiamond particles synthesized from a mixture of graphite and hexogen were analyzed to determine the presence of substitutional nitrogen using pulsed electron paramagnetic resonance (EPR) spectroscopy. Nitrogen paramagnetic centers in the amount of 1.2 ppm have been identified. The spin relaxation characteristics for both nitrogen and surface defects are also reported. A new approach for efficient depletion of the strong non-nitrogen EPR signal in nanodiamond material by immersing nanodiamond particles into ice matrix is suggested. This approach allows an essential decrease of the spin relaxation time of the dominant non-nitrogen defects, while preserving the substitutional nitrogen spin relaxation time.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000293211200012	Publication Date	2011-09-19
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1941-4900;1941-4919;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.889	Times cited	14	Open Access
	Notes				Approved	Most recent IF: 1.889; 2011 IF: 0.528
	Call Number	UA @ lucian @ c:irua:91943			Serial	1548
Permanent link to this record



	Author	Tinck, S.; Boullart, W.; Bogaerts, A.
	Title	Modeling Cl₂/O₂/Ar inductively coupled plasmas used for silicon etching : effects of SiO₂ chamber wall coating			Type	A1 Journal article
	Year	2011	Publication	Plasma sources science and technology	Abbreviated Journal	Plasma Sources Sci T
	Volume	20	Issue	4	Pages	045012-045012,19
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	In this paper, simulations are performed to gain a better insight into the properties of a Cl2/Ar plasma, with and without O2, during plasma etching of Si. Both plasma and surface properties are calculated in a self-consistent manner. Special attention is paid to the behavior of etch products coming from the wafer or the walls, and how the chamber walls can affect the plasma and the resulting etch process. Two modeling cases are considered. In the first case, the reactor walls are defined as clean (Al2O3), whereas in the second case a SiO2 coating is introduced on the reactor walls before the etching process, so that oxygen will be sputtered from the walls and introduced into the plasma. For this reason, a detailed reaction set is presented for a Cl2/O2/Ar plasma containing etched species, as well as an extensive reaction set for surface processes, including physical and chemical sputtering, chemical etching and deposition processes. Density and flux profiles of various species are presented for a better understanding of the bulk plasma during the etching process. Detailed information is also given on the composition of the surfaces at various locations of the reactor, on the etch products in the plasma and on the surface loss probabilities of the plasma species at the walls, with different compositions. It is found that in the clean chamber, walls are mostly chlorinated (Al2Cl3), with a thin layer of etch products residing on the wall. In the coated chamber, an oxy-chloride layer is grown on the walls for a few nanometers during the etching process. The Cl atom wall loss probability is found to decrease significantly in the coated chamber, hence increasing the etch rate. SiCl2, SiCl4 and SiCl3 are found to be the main etch products in the plasma, with the fraction of SiCl2 being always slightly higher. The simulation results compare well with experimental data available from the literature.
	Address
	Corporate Author				Thesis
	Publisher	Institute of Physics	Place of Publication	Bristol	Editor
	Language		Wos	000295829800014	Publication Date	2011-06-14
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0963-0252;1361-6595;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.302	Times cited	22	Open Access
	Notes				Approved	Most recent IF: 3.302; 2011 IF: 2.521
	Call Number	UA @ lucian @ c:irua:91045			Serial	2141
Permanent link to this record



	Author	Jochems, P.; Satyawali, Y.; van Roy, S.; Doyen, W.; Diels, L.; Dejonghe, W.
	Title	Characterization and optimization of \beta-galactosidase immobilization process on a mixed-matrix membrane			Type	A1 Journal article
	Year	2011	Publication	Enzyme and microbial technology	Abbreviated Journal
	Volume	49	Issue	6/7	Pages	580-588
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	β-Galactosidase is an important enzyme catalyzing not only the hydrolysis of lactose to the monosaccharides glucose and galactose but also the transgalactosylation reaction to produce galacto-oligosaccharides (GOS). In this study, β-galactosidase was immobilized by adsorption on a mixed-matrix membrane containing zirconium dioxide. The maximum β-galactosidase adsorbed on these membranes was 1.6 g/m2, however, maximal activity was achieved at an enzyme concentration of around 0.5 g/m2. The tests conducted to investigate the optimal immobilization parameters suggested that higher immobilization can be achieved under extreme parameters (pH and temperature) but the activity was not retained at such extreme operational parameters. The investigations on immobilized enzymes indicated that no real shift occurred in its optimal temperature after immobilization though the activity in case of immobilized enzyme was better retained at lower temperature (5 °C). A shift of 0.5 unit was observed in optimal pH after immobilization (pH 6.5 to 7). Perhaps the most striking results are the kinetic parameters of the immobilized enzyme; while the Michaelis constant (Km) value increased almost eight times compared to the free enzyme, the maximum enzyme velocity (Vmax) remained almost constant.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000298529600015	Publication Date	2011-06-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0141-0229	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:90060			Serial	7608
Permanent link to this record



	Author	Bultinck, E.; Bogaerts, A.
	Title	Characterization of an Ar/O₂ magnetron plasma by a multi-species Monte Carlo model			Type	A1 Journal article
	Year	2011	Publication	Plasma sources science and technology	Abbreviated Journal	Plasma Sources Sci T
	Volume	20	Issue	4	Pages	045013-045013,12
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	A combined Monte Carlo (MC)/analytical surface model is developed to study the plasma processes occurring during the reactive sputter deposition of TiOx thin films. This model describes the important plasma species with a MC approach (i.e. electrons, Ar+ ions, {\rm O}_2
	Address
	Corporate Author				Thesis
	Publisher	Institute of Physics	Place of Publication	Bristol	Editor
	Language		Wos	000295829800015	Publication Date	2011-06-14
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0963-0252;1361-6595;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.302	Times cited	7	Open Access
	Notes				Approved	Most recent IF: 3.302; 2011 IF: 2.521
	Call Number	UA @ lucian @ c:irua:89732			Serial	316
Permanent link to this record



	Author	Jehanathan, N.; Georgieva, V.; Saraiva, M.; Depla, D.; Bogaerts, A.; Van Tendeloo, G.
	Title	The influence of Cr and Y on the micro structural evolution of Mg―Cr―O and Mg―Y―O thin films			Type	A1 Journal article
	Year	2011	Publication	Thin solid films : an international journal on the science and technology of thin and thick films	Abbreviated Journal	Thin Solid Films
	Volume	519	Issue	16	Pages	5388-5396
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT); Electron microscopy for materials research (EMAT)
	Abstract	The compositional influence of Cr and Y on the microstructure of Mg―Cr―O, and Mg―Y―O films synthesized by reactive magnetron sputtering has been investigated by transmission electron microscopy, X-ray diffraction and molecular dynamics simulations. A decrease in crystallinity is observed in these films as the M (Cr or Y) content is increased. It is found that M forms a solid solution with MgO for metal ratios up to ~ 70% and ~ 50% for Cr and Y respectively. Above ~ 70% Cr metal ratio the Mg―Cr―O films are found to be completely amorphous. The Mg―Y―O films are composed of Mg(Y)O and Y2O3 nano crystallites, up to ~ 50% Y metal ratio. Above this ratio, only Y2O3 nano crystallites are found. The preferential < 111> MgO grain alignment is strongly affected by the increase in M content. For M metal ratios up to ~ 50%, there is a selective promotion of the < 100> MgO grain alignments and a decline in the < 111> grain alignments.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lausanne	Editor
	Language		Wos	000292573500013	Publication Date	2011-02-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0040-6090;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.879	Times cited	4	Open Access
	Notes	Iwt			Approved	Most recent IF: 1.879; 2011 IF: 1.890
	Call Number	UA @ lucian @ c:irua:89516			Serial	1618
Permanent link to this record



	Author	Kapra, A.V.; Misko, V.R.; Vodolazov, D.Y.; Peeters, F.M.
	Title	The guidance of vortex-antivortex pairs by in-plane magnetic dipoles in a superconducting finite-size film			Type	A1 Journal article
	Year	2011	Publication	Superconductor science and technology	Abbreviated Journal	Supercond Sci Tech
	Volume	24	Issue	2	Pages	024014-024014,8
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	The possibility of manipulating vortex matter by using various artificial pinning arrays is of significant importance for possible applications in nano and micro fluxonics devices. By numerically solving the time-dependent GinzburgLandau equations, we study the vortexantivortex (vav) dynamics in a hybrid structure consisting of a finite-size superconductor with magnetic dipoles on top which generate vav pairs in the presence of an external current. The vav dynamics is analyzed for different arrangements and magnetic moments of the dipoles, as a function of angle α between the direction of the magnetic dipole and that of the Lorentz force produced by the applied current. The interplay of the attractive interaction between a vav pair and the Lorentz force leads either to the separation of (anti)vortices and their motion in opposite directions or to their annihilation. We found a critical angle αc, below which vortices and antivortices are repelled, while for larger angles they annihilate. In case of a single (few) magnetic dipole(s), this magnetic dipole induced vav guidance is influenced by the self-interaction of the vav pairs with their images in a finite-size sample, while for a periodic array of dipoles the guidance is determined by the interaction of a vav pair with other dipoles and vav pairs created by them. This effect is tunable through the external current and the magnetization and size of the magnetic dipoles.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Bristol	Editor
	Language		Wos	000286379900015	Publication Date	2011-01-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0953-2048;1361-6668;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.878	Times cited	28	Open Access
	Notes	; This work was supported by the 'Odysseus' program of the Flemish Government and the Flemish Science Foundation (FWO-Vl), the Interuniversity Attraction Poles (IAP) Programme-Belgian State-Belgian Science Policy, and the FWO-Vl. DYV acknowledges support from the Russian Fund for Basic Research and Russian Agency of Education under the Federal Programme 'Scientific and educational personnel of innovative Russia in 2009-2013'. ;			Approved	Most recent IF: 2.878; 2011 IF: 2.662
	Call Number	UA @ lucian @ c:irua:88732			Serial	1399
Permanent link to this record



	Author	Milošević, M.V.; Peeters, F.M.; Jankó, B.
	Title	Vortex manipulation in superconducting films with tunable magnetic topology			Type	A1 Journal article
	Year	2011	Publication	Superconductor science and technology	Abbreviated Journal	Supercond Sci Tech
	Volume	24	Issue	2	Pages	024001-024001,6
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	Using a combination of the phenomenological GinzburgLandau theory and micromagnetic simulations, we study properties of a superconducting film with an array of soft magnetic dots on top. An external in-plane magnetic field gradually drives the magnets from an out-of-plane or magnetic vortex state to an in-plane single-domain state, which changes spatially the distribution of the superconducting condensate. If induced by the magnets, the vortexantivortex molecules exhibit rich transitions as a function of the applied in-plane field. At the same time, we show how the magnetic dots act as very effective dynamic pinning centers for vortices in an applied perpendicular magnetic field.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Bristol	Editor
	Language		Wos	000286379900002	Publication Date	2011-01-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0953-2048;1361-6668;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.878	Times cited	8	Open Access
	Notes	; This research was supported by the Flemish Science Foundation (FWO-Vl), the Belgian Science Policy (IAP), the JSPS/ESF-NES program, the bilateral project between Flanders and the USA, NSF NIRT, ECS-0609249, and the Institute for Theoretical Sciences. ;			Approved	Most recent IF: 2.878; 2011 IF: 2.662
	Call Number	UA @ lucian @ c:irua:88731			Serial	3870
Permanent link to this record



	Author	Molina, L.; Tan, H.; Biermans, E.; Batenburg, K.J.; Verbeeck, J.; Bals, S.; Van Tendeloo, G.
	Title	Barrier efficiency of sponge-like La₂Zr₂O₇ buffer layers for YBCO-coated conductors			Type	A1 Journal article
	Year	2011	Publication	Superconductor science and technology	Abbreviated Journal	Supercond Sci Tech
	Volume	24	Issue	6	Pages	065019-065019,8
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab
	Abstract	Solution derived La2Zr2O7 films have drawn much attention for potential applications as thermal barriers or low-cost buffer layers for coated conductor technology. Annealing and coating parameters strongly affect the microstructure of La2Zr2O7, but different film processing methods can yield similar microstructural features such as nanovoids and nanometer-sized La2Zr2O7 grains. Nanoporosity is a typical feature found in such films and the implications for the functionality of the films are investigated by a combination of scanning transmission electron microscopy (STEM), electron energy-loss spectroscopy (EELS) and quantitative electron tomography. Chemical solution based La2Zr2O7 films deposited on flexible Ni5 at.%W substrates with a {100}lang001rang biaxial texture were prepared for an in-depth characterization. A sponge-like structure composed of nanometer-sized voids is revealed by high-angle annular dark-field scanning transmission electron microscopy in combination with electron tomography. A three-dimensional quantification of nanovoids in the La2Zr2O7 film is obtained on a local scale. Mostly non-interconnected highly faceted nanovoids compromise more than one-fifth of the investigated sample volume. The diffusion barrier efficiency of a 170 nm thick La2Zr2O7 film is investigated by STEM-EELS, yielding a 1.8 ± 0.2 nm oxide layer beyond which no significant nickel diffusion can be detected and intermixing is observed. This is of particular significance for the functionality of YBa2Cu3O7 − δ coated conductor architectures based on solution derived La2Zr2O7 films as diffusion barriers.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Bristol	Editor
	Language		Wos	000290472900021	Publication Date	2011-04-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0953-2048;1361-6668;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.878	Times cited	31	Open Access
	Notes	Esteem 026019; Fwo			Approved	Most recent IF: 2.878; 2011 IF: 2.662
	Call Number	UA @ lucian @ c:irua:88639UA @ admin @ c:irua:88639			Serial	221
Permanent link to this record



	Author	De Bie, C.; Martens, T.; van Dijk, J.; Paulussen, S.; Verheyde, B.; Corthals, S.; Bogaerts, A.
	Title	Dielectric barrier discharges used for the conversion of greenhouse gases: modeling the plasma chemistry by fluid simulations			Type	A1 Journal article
	Year	2011	Publication	Plasma sources science and technology	Abbreviated Journal	Plasma Sources Sci T
	Volume	20	Issue	2	Pages	024008,1-024008,11
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	The conversion of methane to value-added chemicals and fuels is considered to be one of the challenges of the 21st century. In this paper we study, by means of fluid modeling, the conversion of methane to higher hydrocarbons or oxygenates by partial oxidation with CO2 or O2 in a dielectric barrier discharge. Sixty-nine different plasma species (electrons, ions, molecules, radicals) are included in the model, as well as a comprehensive set of chemical reactions. The calculation results presented in this paper include the conversion of the reactants and the yields of the reaction products as a function of residence time in the reactor, for different gas mixing ratios. Syngas (i.e. H2 + CO) and higher hydrocarbons (C2Hx) are typically found to be important reaction products.
	Address
	Corporate Author				Thesis
	Publisher	Institute of Physics	Place of Publication	Bristol	Editor
	Language		Wos	000290719900009	Publication Date	2011-04-02
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0963-0252;1361-6595;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.302	Times cited	38	Open Access
	Notes				Approved	Most recent IF: 3.302; 2011 IF: 2.521
	Call Number	UA @ lucian @ c:irua:87868			Serial	689
Permanent link to this record



	Author	Lubyshev, D.; Fastenau, J.M.; Fang, X.-M.; Wu, Y.; Doss, C.; Snyder, A.; Liu, W.K.; Lamb, M.S.M.; Bals, S.; Song, C.
	Title	Comparison of As- and P-based metamorphic buffers for high performance InP heterojunction bipolar transistor and high electron mobility transistor applications			Type	A1 Journal article
	Year	2004	Publication	Journal of vacuum science & technology. B. Microelectronics and nanometer structures. Processing, measurement and phenomena	Abbreviated Journal
	Volume	22	Issue	3	Pages	1565-1569
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Metamorphic buffers (M-buffers) consisting of graded InAlAs or bulk InP were employed for the production of InP-based epiwafers on GaAs substrates by molecular-beam epitaxy. The graded InAlAs is the standard for production metamorphic high electron mobility transistors (M-HEMTs), while the bulk InP offers superior thermal properties for higher current density circuits. The surface morphology and crystal structure of the two M-buffers showed different relaxation mechanisms. The graded InAlAs gave a cross-hatched pattern with nearly full relaxation and very effective dislocation filtering, while the bulk InP had a uniform isotropic surface with dislocations propagating further up towards the active layers. Both types of M-buffers had atomic force microscopy root-mean-square roughness values around 2030 Å. The Hall transport properties of high electron mobility transistors (HEMTs) grown on the InAlAs M-buffer, and a baseline HEMT grown lattice matched on InP, both had room-temperature mobilities >10 000 cm2/V s, while the M-HEMT on the InP M-buffer showed a decrease to 9000 cm2/V s. Similarly, the dc parameters of a double heterojunction bipolar transistor (DHBT) grown on the InAlAs M-buffer were much closer to the baseline heterojunction bipolar transistor than a DHBT grown on the InP M-buffer. A high breakdown voltage of 11.3 V was achieved on an M-DHBT with the InAlAs M-buffer. We speculate that the degradation in device characteristics on the InP M-buffer was related to the incomplete dislocation filtering.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Woodbury, N.Y.	Editor
	Language		Wos	000222481400141	Publication Date	2004-07-08
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0734-211X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	25	Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:87596			Serial	427
Permanent link to this record



	Author	Tinck, S.; Bogaerts, A.
	Title	Computer simulations of an oxygen inductively coupled plasma used for plasma-assisted atomic layer deposition			Type	A1 Journal article
	Year	2011	Publication	Plasma sources science and technology	Abbreviated Journal	Plasma Sources Sci T
	Volume	20	Issue	1	Pages	015008-015008,10
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	In this paper, an O2 inductively coupled plasma used for plasma enhanced atomic layer deposition of Al2O3 thin films is investigated by means of modeling. This work intends to provide more information about basic plasma properties such as species densities and species fluxes to the substrate as a function of power and pressure, which might be hard to measure experimentally. For this purpose, a hybrid model developed by Kushner et al is applied to calculate the plasma characteristics in the reactor volume for different chamber pressures ranging from 1 to 10 mTorr and different coil powers ranging from 50 to 500 W. Density profiles of the various oxygen containing plasma species are reported as well as fluxes to the substrate under various operating conditions. Furthermore, different orientations of the substrate, which can be placed vertically or horizontally in the reactor, are taken into account. In addition, special attention is paid to the recombination process of atomic oxygen on the different reactor walls under the stated operating conditions. From this work it can be concluded that the plasma properties change significantly in different locations of the reactor. The plasma density near the cylindrical coil is high, while it is almost negligible in the neighborhood of the substrate. Ion and excited species fluxes to the substrate are found to be very low and negligible. Finally, the orientation of the substrate has a minor effect on the flux of O2, while it has a significant effect on the flux of O. In the horizontal configuration, the flux of atomic oxygen can be up to one order of magnitude lower than in the vertical configuration.
	Address
	Corporate Author				Thesis
	Publisher	Institute of Physics	Place of Publication	Bristol	Editor
	Language		Wos	000286592200009	Publication Date	2011-01-08
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0963-0252;1361-6595;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.302	Times cited	11	Open Access
	Notes				Approved	Most recent IF: 3.302; 2011 IF: 2.521
	Call Number	UA @ lucian @ c:irua:85285			Serial	467
Permanent link to this record



	Author	Ma, J.; Duong, T.H.; Smits, M.; Verstraete, W.; Carballa, M.
	Title	Enhanced biomethanation of kitchen waste by different pre-treatments			Type	A1 Journal article
	Year	2011	Publication	Bioresource technology	Abbreviated Journal
	Volume	102	Issue	2	Pages	592-599
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	Five different pre-treatments were investigated to enhance the solubilisation and anaerobic biodegradability of kitchen waste ( KW) in thermophilic batch and continuous tests. In the batch solubilisation tests, the highest and the lowest solubilisation efficiency were achieved with the thermo-acid and the pressuredepressure pre-treatments, respectively. However, in the batch biodegradability tests, the highest cumulative biogas production was obtained with the pressuredepressure method. In the continuous tests, the best performance in terms of an acceptable biogas production efficiency of 60% and stable in-reactor CODs and VFA concentrations corresponded to the pressuredepressure reactor, followed by freezethaw, acid, thermo-acid, thermo and control. The maximum OLR (5 g COD L−1 d−1) applied in the pressuredepressure and freezethaw reactors almost doubled the control reactor. From the overall analysis, the freezethaw pre-treatment was the most profitable process with a net potential profit of around 11.5 ton−1 KW.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000286782700022	Publication Date	2010-08-12
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0960-8524	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:85249			Serial	7910
Permanent link to this record



	Author	Carballa, M.; Smits, M.; Etchebehere, C.; Boon, N.; Verstraete, W.
	Title	Correlations between molecular and operational parameters in continuous lab-scale anaerobic reactors			Type	A1 Journal article
	Year	2011	Publication	Applied microbiology and biotechnology	Abbreviated Journal
	Volume	89	Issue	2	Pages	303-314
	Keywords	A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	In this study, the microbial community characteristics in continuous lab-scale anaerobic reactors were correlated to reactor functionality using the microbial resource management (MRM) approach. Two molecular techniques, denaturing gradient gel electrophoresis (DGGE) and terminal-restriction fragment length polymorphism (T-RFLP), were applied to analyze the bacterial and archaeal communities, and the results obtained have been compared. Clustering analyses showed a similar discrimination of samples with DGGE and T-RFLP data, with a clear separation between the meso- and thermophilic communities. Both techniques indicate that bacterial and mesophilic communities were richer and more even than archaeal and thermophilic communities, respectively. Remarkably, the community composition was highly dynamic for both Bacteria and Archaea, with a rate of change between 30% and 75% per 18 days, also in stable performing periods. A hypothesis to explain the latter in the context of the converging metabolism in anaerobic processes is proposed. Finally, a more even and diverse bacterial community was found to be statistically representative for a well-functioning reactor as evidenced by a low Ripley index and high biogas production.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000285872500008	Publication Date	2010-09-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0175-7598; 1432-0614	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:85202			Serial	7736
Permanent link to this record



	Author	Hauchecorne, B.; Tytgat, T.; Terrens, D.; Vanpachtenbeke, F.; Lenaerts, S.
	Title	Validation of a newly developed FTIR in situ reactor: real time study of photocatalytic degradation of nitric oxide			Type	A1 Journal article
	Year	2010	Publication	Infrared physics and technology	Abbreviated Journal	Infrared Phys Techn
	Volume	53	Issue	6	Pages	469-473
	Keywords	A1 Journal article; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	For many years, photocatalysis has been proposed as one of the promising techniques to abate environmental pollutants. To improve these reactions it is vital to know the reaction mechanisms of the photocatalytic degradation. This new reactor will make it possible to study the catalytic surface at the moment the reactions occur. By the means of UV LED illumination there is no need of an external UV lamp and thus lowers the cost. The validation of this newly developed reactor is done by investigating the photocatalytic reaction mechanism of nitric oxide (NO) and comparing these findings with those already discussed in literature. From these results, it became clear that the newly developed FTIR in situ reactor allows real time study of photocatalytic degradations.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000285169400009	Publication Date	2010-10-09
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1350-4495	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.713	Times cited	12	Open Access
	Notes	; ;			Approved	Most recent IF: 1.713; 2010 IF: 0.932
	Call Number	UA @ admin @ c:irua:84561			Serial	6002
Permanent link to this record



	Author	Paulussen, S.; Verheyde, B.; Tu, X.; De Bie, C.; Martens, T.; Petrovic, D.; Bogaerts, A.; Sels, B.
	Title	Conversion of carbon dioxide to value-added chemicals in atmospheric pressure dielectric barrier discharges			Type	A1 Journal article
	Year	2010	Publication	Plasma sources science and technology	Abbreviated Journal	Plasma Sources Sci T
	Volume	19	Issue	3	Pages	034015,1-034015,6
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	The aim of this work consists of the evaluation of atmospheric pressure dielectric barrier discharges for the conversion of greenhouse gases into useful compounds. Therefore, pure CO2 feed flows are administered to the discharge zone at varying discharge frequency, power input, gas temperature and feed flow rates, aiming at the formation of CO and O2. The discharge obtained in CO2 is characterized as a filamentary mode with a microdischarge zone in each half cycle of the applied voltage. It is shown that the most important parameter affecting the CO2-conversion levels is the gas flow rate. At low flow rates, both the conversion and the CO-yield are significantly higher. In addition, also an increase in the gas temperature and the power input give rise to higher conversion levels, although the effect on the CO-yield is limited. The optimum discharge frequency depends on the power input level and it cannot be unambiguously stated that higher frequencies give rise to increased conversion levels. A maximum CO2 conversion of 30% is achieved at a flow rate of 0.05 L min−1, a power density of 14.75 W cm−3 and a frequency of 60 kHz. The most energy efficient conversions are achieved at a flow rate of 0.2 L min−1, a power density of 11 W cm−3 and a discharge frequency of 30 kHz.
	Address
	Corporate Author				Thesis
	Publisher	Institute of Physics	Place of Publication	Bristol	Editor
	Language		Wos	000277982800016	Publication Date	2010-05-22
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0963-0252;1361-6595;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.302	Times cited	116	Open Access
	Notes				Approved	Most recent IF: 3.302; 2010 IF: 2.218
	Call Number	UA @ lucian @ c:irua:82408			Serial	512
Permanent link to this record