NANOlab Center of Excellence literature database -- Query Results

	NANOlab Center of Excellence literature database Home \| Show All \| Simple Search \| Advanced Search	Login Quick Search: Field: contains: ...
	211–240 of 259 records found matching your query (RSS \| history):

Select All Deselect All

<< 1 2 3 4 5 6 7 8 9 >>

List View

Citations

Details

	Records
	Author	Geurts, R.; Milošević, M.V.; Peeters, F.M.
	Title	Second generation of vortex-antivortex states in mesoscopic superconductors: stabilization by artificial pinning			Type	A1 Journal article
	Year	2009	Publication	Physical review : B : solid state	Abbreviated Journal	Phys Rev B
	Volume	79	Issue	17	Pages	174508,1-174508,5
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	Antagonistic symmetries of superconducting polygons and their induced multivortex states in a homogeneous magnetic field may lead to the appearance of antivortices in the vicinity of the superconducting/normal-state boundary (where mesoscopic confinement is particularly strong). Resulting vortex-antivortex (V-Av) molecules match the sample symmetry but are extremely sensitive to defects and fluctuations and remain undetected experimentally. Here we show that V-Av states can reappear deep in the superconducting state due to an array of perforations in a polygonal setting, surrounding a central hole. Such states are no longer caused by the symmetry of the sample but rather by pinning itself, which prevents the vortex-antivortex annihilation. As a result, even micron size, clearly spaced V-Av molecules can be stabilized in large mesoscopic samples.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lancaster, Pa	Editor
	Language		Wos	000266501100098	Publication Date	2009-05-06
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1098-0121;1550-235X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.836	Times cited	17	Open Access
	Notes				Approved	Most recent IF: 3.836; 2009 IF: 3.475
	Call Number	UA @ lucian @ c:irua:77399			Serial	2956
Permanent link to this record



	Author	de Backer, J.W.; Vos, W.G.; Burnell, P.; Verhulst, S.L.; Salmon, P.; de Clerck, N.; de Backer, W.
	Title	Study of the variability in upper and lower airway morphology in Sprague-Dawley rats using modern micro-CT scan-based segmentation techniques			Type	A1 Journal article
	Year	2009	Publication	The anatomical record: advances in integrative anatomy and evolutionary biology	Abbreviated Journal	Anat Rec
	Volume	292	Issue	5	Pages	720-727
	Keywords	A1 Journal article; Condensed Matter Theory (CMT); Laboratory Experimental Medicine and Pediatrics (LEMP)
	Abstract	Animal models are being used extensively in pre-clinical and safety assessment studies to assess the effectiveness and safety of new chemical entities and delivery systems. Although never entirely replacing the need for animal testing, the use of computer simulations could eventually reduce the amount of animals needed for research purposes and refine the data acquired from the animal studies. Computational fluid dynamics is a powerful tool that makes it possible to simulate flow and particle behavior in animal or patient-specific respiratory models, for purposes of inhaled delivery. This tool requires an accurate representation of the respiratory system, respiration and dose delivery attributes. The aim of this study is to develop a representative airway model of the Sprague-Dawley rat using static and dynamic micro-CT scans. The entire respiratory tract was modeled, from the snout and nares down to the central airways at the point where no distinction could be made between intraluminal air and the surrounding tissue. For the selection of the representative model, variables such as upper airway movement, segmentation length, airway volume and size are taken into account. Dynamic scans of the nostril region were used to illustrate the characteristic morphology of this region in anaesthetized animals. It could be concluded from this study that it was possible to construct a highly detailed representative model of a Sprague-Dawley rat based on imaging modalities such as micro-CT scans
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York, N.Y.	Editor
	Language		Wos	000265766000010	Publication Date	2009-03-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-8486;1932-8494;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.431	Times cited	16	Open Access
	Notes				Approved	Most recent IF: 1.431; 2009 IF: 1.490
	Call Number	UA @ lucian @ c:irua:76455			Serial	3342
Permanent link to this record



	Author	Parsons, T.G.; d' Hondt, H.; Hadermann, J.; Hayward, M.A.
	Title	Synthesis and structural characterization of La_1-xA_xMnO_2.5 (A = Ba, Sr, Ca) phases: mapping the variants of the brownmillerite structure			Type	A1 Journal article
	Year	2009	Publication	Chemistry of materials	Abbreviated Journal	Chem Mater
	Volume	21	Issue	22	Pages	5527-5538
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Analysis of the structural parameters of phases that adopt brownmillerite-type structures suggests the distribution of the different complex ordering schemes adopted within this structure type can be rationalized by considering both the size of the separation between the tetrahedral layers and the tetrahedral chain distortion angle. A systematic study using structural data obtained from La1−xAxMnO2,5 (A = Ba, Sr, Ca,) phases, prepared by the topotactic reduction of the analogous La1−xAxMnO3 perovskite phases, was performed to investigate this relationship. By manipulating the A-cation composition, both the tetrahedral layer separation and tetrahedral chain distortion angle in the La1−xAxMnO2,5 phases were controlled and from the data obtained a ¡°structure map¡± of the different brownmillerite variants was plotted as a function of these structural parameters. This map has been extended to include a wide range of reported brownmillerite phases showing the structural ideas presented are widely applicable. The complete structural characterization of La1−xAxMnO2,5 0.1 ¡Ü x ¡Ü 0.33, A = Ba; 0.15 ¡Ü x ¡Ü 0.5 A = Sr, and 0.22 ¡Ü x ¡Ü 0.5 A = Ca is described and includes compositions which exhibit complex intralayer ordered structures and Mn2+/Mn3+ charge ordering.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000271756400021	Publication Date	2009-10-29
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0897-4756;1520-5002;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	9.466	Times cited	60	Open Access
	Notes	Iap Vi			Approved	Most recent IF: 9.466; 2009 IF: 5.368
	Call Number	UA @ lucian @ c:irua:79935			Serial	3435
Permanent link to this record



	Author	Lindner, H.; Autrique, D.; Garcia, C.C.; Niemax, K.; Bogaerts, A.
	Title	Optimized transport setup for high repetition rate pulse-separated analysis in laser ablation-inductively coupled plasma mass spectrometry			Type	A1 Journal article
	Year	2009	Publication	Analytical chemistry	Abbreviated Journal	Anal Chem
	Volume	81	Issue	11	Pages	4241-4248
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	An optimized laser ablation setup, proposed for high repetition rate inductively coupled plasma mass spectrometry (ICPMS) analyses such as 2D imaging or depth profiling, is presented. For such applications, the particle washout time needs to be as short as possible to allow high laser pulse frequencies for reduced analysis time. Therefore, it is desirable to have an ablation setup that operates as a laminar flow reactor (LFR). A top-down strategy was applied that resulted in the present design. In the first step, a previously applied ablation setup was analyzed on the basis of computational fluid dynamics (CFD) results presented by D. Autrique et al. (Spectrochim. Acta, B 2008, 63, 257−270). By means of CFD simulations, the design was modified in such a way that it operated in the LFR regime. Experimental results demonstrate that the current design can indeed be regarded as an LFR. Furthermore, the operation under LFR conditions allowed some insight into the initial radial concentration distribution if the experimental ICPMS signal and analytical expressions are taken into account. Recommendations for a modified setup for more resilient spatial distributions are given. With the present setup, a washout time of 140 ms has been achieved for a 3% signal area criterion. Therefore, 7 Hz repetition rates can be applied with the present setup. Using elementary formulas of the analytical model, an upper bound for the washout times for similar setups can be predicted. The authors believe that the presented setup geometry comes close to the achievable limit for reliable short washout times.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000266601800014	Publication Date	2009-04-29
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0003-2700;1520-6882;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.32	Times cited	18	Open Access
	Notes				Approved	Most recent IF: 6.32; 2009 IF: 5.214
	Call Number	UA @ lucian @ c:irua:76935			Serial	2492
Permanent link to this record



	Author	Dominiczak, M.; Ruyter, A.; Limelette, P.; Monot-Laffez, I.; Giovannelli, F.; Rossell, M.D.; Van Tendeloo, G.
	Title	Effects of nanocracks on the magnetic and electrical properties of La_0.8Sr_0.2MnO₃ single crystals			Type	A1 Journal article
	Year	2009	Publication	Solid state communications	Abbreviated Journal	Solid State Commun
	Volume	149	Issue	37/38	Pages	1543-1548
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	An investigation of the physical properties of La0.8Sr0.2MnO3 single crystals grown by the molten zone technique is realized close to the metal-to-insulator transition temperature (TMI). In this paper, we review the effect of the structural defects through magnetotransport and local magnetic microstructures. From electron microscopy observations, some nanocrack defects (i.e. defects at a nanometer scale) were found, essentially in the center part of the single crystals. At room temperature, magnetic force microscopy measurements have shown that the absence of defects allowed a magnetic ordering of the domains at the crystal edge, which is the best-crystallized region. In addition, the magnetization loops have permitted us to verify that the crystal was ferromagnetically weaker in the center. On analyzing the electrical resistivity data, we observed in the linear current regime a sensitive variation of the resistivity due to defects, by comparing the center and the edge of the material at TMI. Additionally, at strong current, non-linearity phenomena have been supposed to be related to local heating. Finally, we discuss the structural disorder effect on the relaxation of the ferromagnetic domains.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York, N.Y.	Editor
	Language		Wos	000269679500012	Publication Date	2009-06-09
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0038-1098;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.554	Times cited	3	Open Access
	Notes				Approved	Most recent IF: 1.554; 2009 IF: 1.837
	Call Number	UA @ lucian @ c:irua:78289			Serial	868
Permanent link to this record



	Author	Mao, D.; Lookman, R.; van de Weghe, H.; Vanermen, G.; de Brucker, N.; Diels, L.
	Title	Aqueous solubility calculation for petroleum mixtures in soil using comprehensive two-dimensional gas chromatography analysis data			Type	A1 Journal article
	Year	2009	Publication	Journal of chromatography : A	Abbreviated Journal
	Volume	1216	Issue	14	Pages	2873-2880
	Keywords	A1 Journal article; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	An assessment of aqueous solubility (leaching potential) of soil contaminations with petroleum hydrocarbons (TPH) is important in the context of the evaluation of (migration) risks and soil/groundwater remediation. Field measurements using monitoring wells often overestimate real TPH concentrations in case of presence of pure oil in the screened interval of the well. This paper presents a method to calculate TPH equilibrium concentrations in groundwater using soil analysis by high-performance liquid chromatography followed by comprehensive two-dimensional gas chromatography (HPLCGCXGC). The oil in the soil sample is divided into 79 defined hydrocarbon fractions on two GCXGC color plots. To each of these fractions a representative water solubility is assigned. Overall equilibrium water solubility of the non-aqueous phase liquid (NAPL) present in the sample and the water phase's chemical composition (in terms of the 79 fractions defined) are then calculated using Raoult's law. The calculation method was validated using soil spiked with 13 different TPH mixtures and 1 field-contaminated soil. Measured water solubilities using a column recirculation equilibration experiment agreed well to calculated equilibrium concentrations and water phase TPH composition.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000264730900020	Publication Date	2008-08-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0021-9673	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:76414			Serial	7492
Permanent link to this record



	Author	Tambuyzer, B.R.; Bergwerf, I.; de Vocht, N.; Reekmans, K.; Daans, J.; Jorens, P.G.; Goossens, H.; Ysebaert, D.K.; Chatterjee, S.; Van Marck, E.; Berneman, Z.N.; Ponsaerts, P.
	Title	Allogeneic stromal cell implantation in brain tissue leads to robust microglial activation			Type	A1 Journal article
	Year	2009	Publication	Immunology and cell biology	Abbreviated Journal	Immunol Cell Biol
	Volume		Issue		Pages
	Keywords	A1 Journal article; Antwerp Surgical Training, Anatomy and Research Centre (ASTARC); Laboratory Experimental Medicine and Pediatrics (LEMP); Bio-Imaging lab; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Although adult and embryonic stem cell-based therapy for central nervous system (CNS) injury is being developed worldwide, less attention is given to the immunological aspects of allogeneic cell implantation in the CNS. The latter is of major importance because, from a practical point of view, future stem cell-based therapy for CNS injury will likely be performed using well-characterised allogeneic stem cell populations. In this study, we aimed to further describe the immunological mechanism leading to rejection of allogeneic bone marrow-derived stromal cells (BM-SC) after implantation in murine CNS. For this, we first investigated the impact of autologous and allogeneic BM-SC on microglia activation in vitro. Although the results indicate that both autologous and allogeneic BM-SC do not activate microglia themselves in vitro, they also do not inhibit activation of microglia after exogenous stimuli in vitro. Next, we investigated the impact of allogeneic BM-SC on microglia activation in vivo. In contrast to the in vitro observations, microglia become highly activated in vivo after implantation of allogeneic BM-SC in the CNS of immune-competent mice. Moreover, our results suggest that microglia, rather than T-cells, are the major contributors to allograft rejection in the CNS.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Adelaide	Editor
	Language		Wos	000266208800003	Publication Date	2009-03-17
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0818-9641	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.557	Times cited	31	Open Access
	Notes				Approved	Most recent IF: 4.557; 2009 IF: 4.200
	Call Number	UA @ lucian @ c:irua:74903			Serial	4515
Permanent link to this record



	Author	Djoković, V.; Krsmanović, R.; Božanić, D.K.; McPherson, M.; Van Tendeloo, G.; Nair, P.S.; Georges, M.K.; Radhakrishnan, T.
	Title	Adsorption of sulfur onto a surface of silver nanoparticles stabilized with sago starch biopolymer			Type	A1 Journal article
	Year	2009	Publication	Colloids and surfaces: B : biointerfaces	Abbreviated Journal	Colloid Surface B
	Volume	73	Issue	1	Pages	30-35
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Adsorption of sulfide ions onto a surface of starch capped silver nanoparticles upon addition of thioacetamide was investigated. UVvis absorption spectroscopy revealed that the adsorption of the sulfide ion on the surface of the silver nanoparticles induced damping as well as blue shift of the silver surface plasmon resonance band. Further increase in thioacetamide concentration led to shift of the resonance band toward higher wavelengths indicating the formation of the continuous Ag2S layer on the silver surface. Thus fabricated nanoparticles were investigated using electron microscopy techniques (TEM, HRTEM, and HAADF-STEM) and X-ray photoelectron spectroscopy (XPS), which confirmed their coreshell structure.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000268657500005	Publication Date	2009-05-05
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0927-7765;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.887	Times cited	41	Open Access
	Notes	Esteem 026019			Approved	Most recent IF: 3.887; 2009 IF: 2.600
	Call Number	UA @ lucian @ c:irua:77972			Serial	66
Permanent link to this record



	Author	Verstraelen, H.; de Baere, K.; Schillemans, W.; Lemmens, L.; Dewil, R.; Lenaerts, S.; Potters, G.
	Title	In situ study of ballast tank corrosion on ships: part 2			Type	A1 Journal article
	Year	2009	Publication	Materials performance	Abbreviated Journal	Mater Performance
	Volume	48	Issue	11	Pages	54-57
	Keywords	A1 Journal article; Engineering sciences. Technology; Theory of quantum systems and complex systems; Sustainable Energy, Air and Water Technology (DuEL)
	Abstract	A study was undertaken to determine causes and effects of corrosion processes in ballast tanks. Part 1 of this article (October 2009 MP) described the data collection. Part 2 describes the development of a corrosion index (CI) derived from the general International Association of Classification Societies corrosion assessment methods. The CI can be used in situ to assess ballast tank corrosion. An average timeline for-corrosion of tanks is presented.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos		Publication Date
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0094-1492	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	0.149	Times cited		Open Access
	Notes				Approved	Most recent IF: 0.149; 2009 IF: 0.124
	Call Number	UA @ admin @ c:irua:79761			Serial	5964
Permanent link to this record



	Author	Leon, M.; Merino, J.M.; Van Tendeloo, G.
	Title	Structural analysis of CuInSe₂, CuInTe₂ and CuInSeTe by electron microscopy and X-ray techniques			Type	A1 Journal article
	Year	2009	Publication	Acta Microscopica	Abbreviated Journal	Acta Microsc
	Volume	18	Issue	2	Pages	128-138
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	A structural research of semiconductor compounds for photovoltaic applications CuInSe(2), CuInTe(2) and CuInSeTe, has been done by x-ray diffraction using the Rietveld analysis of experimental diagrams. Besides, in the CuInSeTe compound the electron diffraction and high resolution microscopy techniques have been used. All the studied compounds were polycrystals with chalcopyrite tetragonal structure, I. 42d. A model for the atomic occupancy in each compound has been proposed, and the results have been compared analyzing the Se-Te substitution effect.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos		Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0798-4545	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	0.07	Times cited		Open Access
	Notes				Approved	Most recent IF: 0.07; 2009 IF: NA
	Call Number	UA @ lucian @ c:irua:95679			Serial	3189
Permanent link to this record



	Author	Idrissi, H.; Schryvers, D.; Salje, E.K.H.; Zhang, H.; Carpenter, M.A.; Moya, X.
	Title	Pinning of the martensitic microstructures by dislocations in Cu_74.08Al_23.13Be_2.79			Type	P1 Proceeding
	Year	2009	Publication		Abbreviated Journal
	Volume		Issue		Pages	02029,1-02029,5
	Keywords	P1 Proceeding; Electron microscopy for materials research (EMAT)
	Abstract	A single crystal of Cu74.08Al23.13Be2.79 undergoes a martensitic phase transition at 246K and 232K under heating and cooling, respectively. Surprisingly, the martensite phase is elastically much harder than the austenite phase showing that interfaces between various crystallographic variants are strongly pinned and can not be moved by external stress while the phase boundary between the austenite and martensite regions in the sample remains mobile. This unusual behavior was revealed by Dynamical Mechanical Analysis and Resonant Ultrasound Spectroscopy. Transmission Electron Microscopy shows that the pinning is generated by dislocations, which are inherited from the austenite phase. Such dislocations can hinder the movement of stacking faults in the 18R martensite structure or twin boundaries between martensite variants.
	Address
	Corporate Author				Thesis
	Publisher	Edp	Place of Publication	Coutaboeuf	Editor
	Language		Wos	000274582300033	Publication Date	2009-08-31
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	2	Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:81952			Serial	2626
Permanent link to this record



	Author	Salje, E.K.H.; Zhang, H.; Idrissi, H.; Schryvers, D.; Carpenter, M.A.; Moya, X.; Planes, A.
	Title	Mechanical resonance of the austenite/martensite interface and the pinning of the martensitic microstructures by dislocations in Cu_74.08Al_23.13Be_2.79			Type	A1 Journal article
	Year	2009	Publication	Physical review: B: condensed matter and materials physics	Abbreviated Journal	Phys Rev B
	Volume	80	Issue	13	Pages	134114,1-1134114,8
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	A single crystal of Cu74.08Al23.13Be2.79 undergoes a martensitic phase transition at 246 and 232 K under heating and cooling, respectively. The phase fronts between the austenite and martensite regions of the sample are weakly mobile with a power-law resonance under external stress fields. Surprisingly, the martensite phase is elastically much harder than the austenite phase showing that interfaces between various crystallographic variants are strongly pinned and cannot be moved by external stress while the phase boundary between the austenite and martensite regions in the sample remains mobile. This unusual behavior was studied by dynamical mechanical analysis (DMA) and resonant ultrasound spectroscopy. The remnant strain, storage modulus, and internal friction were recorded simultaneously for different applied forces in DMA. With increasing forces, the remnant strain increases monotonously while the internal friction peak height shows a minimum at 300 mN. Transmission electron microscopy shows that the pinning is generated by dislocations which are inherited from the austenite phase.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lancaster, Pa	Editor
	Language		Wos	000271351300033	Publication Date	2009-10-22
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1098-0121;1550-235X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.836	Times cited	38	Open Access
	Notes	Multimat			Approved	Most recent IF: 3.836; 2009 IF: 3.475
	Call Number	UA @ lucian @ c:irua:78542			Serial	1975
Permanent link to this record



	Author	Delville, R.; Schryvers, D.; Zhang, Z.; James, R.D.
	Title	Transmission electron microscopy investigation of microstructures in low-hysteresis alloys with special lattice parameters			Type	A1 Journal article
	Year	2009	Publication	Scripta materialia	Abbreviated Journal	Scripta Mater
	Volume	60	Issue	5	Pages	293-296
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	A sharp drop in hysteresis is observed for shape memory alloys satisfying the compatibility condition between austenite and martensite, i.e. ë2 = 1, where ë2 is the middle eigenvalue of the transformation strain matrix. The present work investigates the evolution of microstructure by transmission electron microscopy as the composition of the Ti50Ni50−xPdx system is systemically tuned to achieve the condition ë2 = 1. Changes in morphology, twinning density and twinning modes are reported along with twinless martensite and exact austenitemartensite interfaces.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000262553300007	Publication Date	2008-11-08
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-6462;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.747	Times cited	56	Open Access
	Notes	Multimat			Approved	Most recent IF: 3.747; 2009 IF: 2.949
	Call Number	UA @ lucian @ c:irua:76017			Serial	3710
Permanent link to this record



	Author	Ke, X.; Bals, S.; Romo Negreira, A.; Hantschel, T.; Bender, H.; Van Tendeloo, G.
	Title	TEM sample preparation by FIB for carbon nanotube interconnects			Type	A1 Journal article
	Year	2009	Publication	Ultramicroscopy	Abbreviated Journal	Ultramicroscopy
	Volume	109	Issue	11	Pages	1353-1359
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	A powerful method to study carbon nanotubes (CNTs) grown in patterned substrates for potential interconnects applications is transmission electron microscopy (TEM). However, high-quality TEM samples are necessary for such a study. Here, TEM specimen preparation by focused ion beam (FIB) has been used to obtain lamellae of patterned samples containing CNTs grown inside contact holes. A dual-cap Pt protection layer and an extensive 5 kV cleaning procedure are applied in order to preserve the CNTs and avoid deterioration during milling. TEM results show that the inner shell structure of the carbon nanotubes has been preserved, which proves that focused ion beam is a useful technique to prepare TEM samples of CNT interconnects.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000270765800006	Publication Date	2009-07-11
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0304-3991;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.843	Times cited	21	Open Access
	Notes	Esteem 026019; Iap			Approved	Most recent IF: 2.843; 2009 IF: 2.067
	Call Number	UA @ lucian @ c:irua:79074			Serial	3485
Permanent link to this record



	Author	Avetisyan, A.A.; Partoens, B.; Peeters, F.M.
	Title	Electric field tuning of the band gap in graphene multilayers			Type	A1 Journal article
	Year	2009	Publication	Physical review : B : solid state	Abbreviated Journal	Phys Rev B
	Volume	79	Issue	3	Pages	035421,1-035421,7
	Keywords	A1 Journal article; Condensed Matter Theory (CMT)
	Abstract	A perpendicular electric field applied to multilayers of graphene modifies the electronic structure near the K point and may induce an energy gap in the electronic spectrum. This gap is tunable by the gate voltage and its size depends on the number of layers. We use a tight-binding approach to calculate the band structure and include a self-consistent calculation in order to obtain the density of charge carriers. Results are presented for systems consisting of three and four layers of graphene. The effect of the circular asymmetry of the band structure on the gap is critically examined.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lancaster, Pa	Editor
	Language		Wos	000262978200119	Publication Date	2009-01-30
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1098-0121;1550-235X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.836	Times cited	106	Open Access
	Notes				Approved	Most recent IF: 3.836; 2009 IF: 3.475
	Call Number	UA @ lucian @ c:irua:75984			Serial	887
Permanent link to this record



	Author	Petrović, D.; Martens, T.; van Dijk, J.; Brok, W.J.M.; Bogaerts, A.
	Title	Fluid modelling of an atmospheric pressure dielectric barrier discharge in cylindrical geometry			Type	A1 Journal article
	Year	2009	Publication	Journal of physics: D: applied physics	Abbreviated Journal	J Phys D Appl Phys
	Volume	42	Issue	20	Pages	205206,1-205206,12
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	A numerical parameter study has been performed for a cylindrical atmospheric pressure dielectric barrier discharge (DBD) in helium with nitrogen impurities using a two-dimensional time-dependent fluid model. The calculated electric currents and gap voltages as a function of time for a given applied potential are presented, as well as the number densities of the various plasma species. This study shows that for the geometry under consideration the applied voltage parameters have a large impact on the electric current profiles and that the discharge current is always determined by the electron and ion conduction currents while the displacement current is nearly negligible. A relative broadening of the current profiles (compared with the duration of the half cycle of the applied voltage) with an increase in the applied frequency is obtained. Nearly sinusoidal current wave forms, usually typical for radio frequency DBDs, are observed while still operating at the frequencies of tens of kilohertz. For the setup under investigation, the Townsend mode of the DBD is observed in the entire range of applied voltage amplitudes and frequencies. It is shown that the average power density dissipated in the discharge increases with rising applied voltage and frequency. An increase in applied voltage frequency leads to an increase in the electron density and a decrease in electron energy, while increasing the voltage amplitude has the opposite effect.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000270563200028	Publication Date	2009-09-24
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-3727;1361-6463;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.588	Times cited	29	Open Access
	Notes				Approved	Most recent IF: 2.588; 2009 IF: 2.083
	Call Number	UA @ lucian @ c:irua:78202			Serial	1228
Permanent link to this record



	Author	Caignaert, V.; Abakumov, A.M.; Pelloquin, D.; Pralong, V.; Maignan, A.; Van Tendeloo, G.; Raveau, B.
	Title	A new mixed-valence ferrite with a cubic structure, YBaFe₄O₇: spin-glass-like behavior			Type	A1 Journal article
	Year	2009	Publication	Chemistry of materials	Abbreviated Journal	Chem Mater
	Volume	21	Issue	6	Pages	1116-1122
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	A new mixed-valence ferrite, YBaFe4O7, has been synthesized. Its unique cubic structure, with a = 8.9595(2) Å, is closely related to that of the hexagonal 114 oxides YBaCo4O7 and CaBaFe4O7. It consists of corner-sharing FeO4 tetrahedra, forming triangular and kagome layers parallel to (111)C. In fact, the YBaFe4O7 and CaBaFe4O7 structures can be described as two different ccc and chch close packings of [BaO3]∞ and [O4]∞ layers, respectively, whose tetrahedral cavities are occupied by Fe2+/Fe3+ cations. The local structure of YBaFe4O7 is characterized by a large amount of stacking faults originating from the presence of hexagonal layers in the ccc cubic close-packed YBaFe4O7 structure. In this way, they belong to the large family of spinels and hexagonal ferrites studied for their magnetic properties. Differently from all the ferrites and especially from CaBaFe4O7, which are ferrimagnetic, YBaFe4O7 is an insulating spin glass with Tg = 50 K.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000264310900019	Publication Date	2009-02-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0897-4756;1520-5002;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	9.466	Times cited	39	Open Access
	Notes	Esteem 026019			Approved	Most recent IF: 9.466; 2009 IF: 5.368
	Call Number	UA @ lucian @ c:irua:76432			Serial	2325
Permanent link to this record



	Author	d' Hondt, H.; Hadermann, J.; Abakumov, A.M.; Kalyuzhnaya, A.S.; Rozova, M.G.; Tsirlin, A.A.; Tan, H.; Verbeeck, J.; Antipov, E.V.; Van Tendeloo, G.
	Title	Synthesis, crystal structure and magnetic properties of the Sr₂Al_0.78Mn_1.22O_5.2 anion-deficient layered perovskite			Type	A1 Journal article
	Year	2009	Publication	Journal of solid state chemistry	Abbreviated Journal	J Solid State Chem
	Volume	182	Issue	2	Pages	356-363
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	A new layered perovskite Sr2Al0.78Mn1.22O5.2 has been synthesized by solid state reaction in a sealed evacuated silica tube. The crystal structure has been determined using electron diffraction, high-resolution electron microscopy, and high-angle annular dark field imaging and refined from X-ray powder diffraction data (space group P4/mmm, a=3.89023(5) Å, c=7.8034(1) Å, RI=0.023, RP=0.015). The structure is characterized by an alternation of MnO2 and (Al0.78Mn0.22)O1.2 layers. Oxygen atoms and vacancies, as well as the Al and Mn atoms in the (Al0.78Mn0.22)O1.2 layers are disordered. The local atomic arrangement in these layers is suggested to consist of short fragments of brownmillerite-type tetrahedral chains of corner-sharing AlO4 tetrahedra interrupted by MnO6 octahedra, at which the chain fragments rotate over 90°. This results in an averaged tetragonal symmetry. This is confirmed by the valence state of Mn measured by EELS. The relationship between the Sr2Al0.78Mn1.22O5.2 tetragonal perovskite and the parent Sr2Al1.07Mn0.93O5 brownmillerite is discussed. Magnetic susceptibility measurements indicate spin glass behavior of Sr2Al0.78Mn1.22O5.2. The lack of long-range magnetic ordering contrasts with Mn-containing brownmillerites and is likely caused by the frustration of interlayer interactions due to presence of the Mn atoms in the (Al0.78Mn0.22)O1.2 layers.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000263124700022	Publication Date	2008-11-14
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-4596;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.299	Times cited	12	Open Access
	Notes	Iap Vi			Approved	Most recent IF: 2.299; 2009 IF: 2.340
	Call Number	UA @ lucian @ c:irua:72943			Serial	3450
Permanent link to this record



	Author	Van Aert, S.; Verbeeck, J.; Erni, R.; Bals, S.; Luysberg, M.; van Dyck, D.; Van Tendeloo, G.
	Title	Quantitative atomic resolution mapping using high-angle annular dark field scanning transmission electron microscopy			Type	A1 Journal article
	Year	2009	Publication	Ultramicroscopy	Abbreviated Journal	Ultramicroscopy
	Volume	109	Issue	10	Pages	1236-1244
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab
	Abstract	A model-based method is proposed to relatively quantify the chemical composition of atomic columns using high angle annular dark field (HAADF) scanning transmission electron microscopy (STEM) images. The method is based on a quantification of the total intensity of the scattered electrons for the individual atomic columns using statistical parameter estimation theory. In order to apply this theory, a model is required describing the image contrast of the HAADF STEM images. Therefore, a simple, effective incoherent model has been assumed which takes the probe intensity profile into account. The scattered intensities can then be estimated by fitting this model to an experimental HAADF STEM image. These estimates are used as a performance measure to distinguish between different atomic column types and to identify the nature of unknown columns with good accuracy and precision using statistical hypothesis testing. The reliability of the method is supported by means of simulated HAADF STEM images as well as a combination of experimental images and electron energy-loss spectra. It is experimentally shown that statistically meaningful information on the composition of individual columns can be obtained even if the difference in averaged atomic number Z is only 3. Using this method, quantitative mapping at atomic resolution using HAADF STEM images only has become possible without the need of simultaneously recorded electron energy loss spectra.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000270015200004	Publication Date	2009-05-28
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0304-3991;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.843	Times cited	166	Open Access
	Notes	Fwo; Esteem 026019			Approved	Most recent IF: 2.843; 2009 IF: 2.067
	Call Number	UA @ lucian @ c:irua:78585UA @ admin @ c:irua:78585			Serial	2748
Permanent link to this record



	Author	Bogaerts, A.
	Title	Effects of oxygen addition to argon glow discharges: a hybrid Monte Carlo-fluid modeling investigation			Type	A1 Journal article
	Year	2009	Publication	Spectrochimica acta: part B : atomic spectroscopy	Abbreviated Journal	Spectrochim Acta B
	Volume	64	Issue	11/12	Pages	1266-1279
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	A hybrid model is developed for describing the effects of oxygen addition to argon glow discharges. The species taken into account in the model include Ar atoms in the ground state and the metastable level, O2 gas molecules in the ground state and two metastable levels, O atoms in the ground state and one metastable level, O3 molecules, Ar+, O+, O2+ and O− ions, as well as the electrons. The hybrid model consists of a Monte Carlo model for electrons and fluid models for the other plasma species. In total, 87 different reactions between the various plasma species are taken into account. Calculation results include the species densities and the importance of their production and loss processes, as well as the dissociation degree of oxygen. The effect of different O2 additions on these calculation results, as well as on the sputtering rates, is discussed.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000272910300016	Publication Date	2009-10-23
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0584-8547;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.241	Times cited	39	Open Access
	Notes				Approved	Most recent IF: 3.241; 2009 IF: 2.719
	Call Number	UA @ lucian @ c:irua:79271			Serial	869
Permanent link to this record



	Author	Tian, H.; Schryvers, D.; Mohanchandra, K.P.; Carman, G.P.; van Humbeeck, J.
	Title	Fabrication and characterization of functionally graded Ni-Ti multilayer thin films			Type	A1 Journal article
	Year	2009	Publication	Functional materials letters	Abbreviated Journal	Funct Mater Lett
	Volume	2	Issue	2	Pages	61-66
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	A functionally graded multilayer NiTi thin film was deposited on a SiO2/Si substrate by d.c. sputtering using a ramped heated NiTi alloy target. The stand-alone films were crystallized at 500°C in vacuum better than 10-7 Torr. Transmission electron microscopy micrographs taken along the film cross section show two distinct regions, thin and thick, with weak R and B2 phases, respectively. The film compositions along the thickness were measured and quantified using the standard-less EELSMODEL method. The film deposited during the initial thermal ramp (thin regions) displays an average of 54 at.% Ni while the film deposited at a more elevated target temperature (thick regions) shows about 51 at.% Ni.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000271077000003	Publication Date	2009-07-22
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1793-6047;1793-7213;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.234	Times cited	9	Open Access
	Notes	Fwo			Approved	Most recent IF: 1.234; 2009 IF: 2.561
	Call Number	UA @ lucian @ c:irua:77655			Serial	1165
Permanent link to this record



	Author	Neira, I.S.; Kolen'ko, Y.V.; Lebedev, O.I.; Van Tendeloo, G.; Gupta, H.S.; Guitián, F.; Yoshimura, M.
	Title	An effective morphology control of hydroxyapatite crystals via hydrothermal synthesis			Type	A1 Journal article
	Year	2009	Publication	Crystal growth & design	Abbreviated Journal	Cryst Growth Des
	Volume	9	Issue	1	Pages	466-474
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	A facile urea-assisted hydrothermal synthesis and systematic characterization of hydroxyapatite (HA) with calcium nitrate tetrahydrate and diammonium hydrogen phosphate as precursors are reported. The advantage of the proposed technique over previously reported synthetic approaches is the simple but precise control of the HA crystals morphology, which is achieved by employing an intensive, stepwise, and slow thermal decomposition of urea as well as varying initial concentrations of starting reagents. Whereas the plate-, hexagonal prism- and needle-like HA particles preferentially growth along the c-axis, the smaller and fine-plate-like HA crystals demonstrate crystal growth along the (102) and (211) directions, uncommon for HA. Furthermore, it was established that the hydrothermally derived powdered products are phase-pure HA containing CO32− anions in the crystal lattice, that is, AB-type carbonated hydroxyapatite. Transmission electron microscopy (TEM) and electron diffraction (ED) of selected samples reveal that the as-prepared HA crystals are single-crystalline and exhibit a nearly defect-free microstructure. The hardness and elastic modulus of the hexagonal prism-like HA crystals have been investigated on a nanoscale using the nanoindentation technique; the observed trends are discussed.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000262332700073	Publication Date	2008-11-21
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1528-7483;1528-7505;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.055	Times cited	183	Open Access
	Notes	Esteem 026019			Approved	Most recent IF: 4.055; 2009 IF: 4.162
	Call Number	UA @ lucian @ c:irua:75740			Serial	853
Permanent link to this record



	Author	Stranger, M.; Potgieter-Vermaak, S.; Sacco, P.; Quaglio, F.; Pagani, D.; Cocheo, C.; Godoi, A.F.L.; Van Grieken, R.
	Title	Analysis of indoor gaseous formic and acetic acid, using radial diffusive samplers			Type	A1 Journal article
	Year	2009	Publication	Environmental monitoring and assessment	Abbreviated Journal
	Volume	149	Issue		Pages	411-417
	Keywords	A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation)
	Abstract	A diffusive sampling method for the determination of gaseous acetic and formic acids, using a radial symmetry diffusive sampler, has been optimised for a 7-day exposure time in this study. Sampling rate determinations were performed on data obtained from a dynamic exposure chamber, simulating the indoor conditions of an empty, closed, room, at room temperature and minimal wind speed. Analysis has been performed by means of ion chromatography. The sampling rates for formic acid concentrations of 128 ìg m−3 and 1248 ìg m−3 were determined to be 91.2 ± 3.9 ml min−1 and 111.6 ± 2.8 ml min−1, respectively. The acetic acid sampling rate was independent of the concentration in the range 160 ìg m−31564 ìg m−3, and amounted to 97.3 ± 3.1 ml min−1. Experimentally determined sampling rates showed deviations of 3% for acetic acid, and 321% for formic acid, in relation to theoretically derived values. The blank values were as low as 1.69 ± 0.07 ìg for formic acid and 1.21 ± 0.14 ìg for acetic acid, and detection limits lower than 0.5 ìg m−3 could be achieved, which is an improvement of 9899% compared to previously validated diffusive sampling methods. This study describes the first step of an extended validation program in which the applicability of these types of samplers for the measurement of organic acids will be validated and optimised for the environmental conditions typical for museum showcases.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000263159800038	Publication Date	2008-06-24
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1420-2026; 1573-2967	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited		Open Access
	Notes				Approved	no
	Call Number	UA @ admin @ c:irua:72923			Serial	7447
Permanent link to this record



	Author	Tarakina, N.V.; Denisova, T.A.; Maksimova, L.G.; Baklanova, Y.V.; Tyutyunnik, A.P.; Berger, I.F.; Zubkov, V.G.; Van Tendeloo, G.
	Title	Investigation of stacking disorder in Li₂SnO₃			Type	A1 Journal article
	Year	2009	Publication	Zeitschrift für Kristallographie	Abbreviated Journal
	Volume		Issue	S:30	Pages	375-380
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	A crystal structure investigation of the low temperature Li2SnO3 modification has been carried out. X-ray, neutron powder and electron diffraction data showed that this compound crystallizes in a monoclinic unit cell with parameters: a = 5.3033(2)Å, b = 9.1738(3)Å, c = 10.0195(2)Å, β ~ 100.042(2)º and has stacking disorder along the c-axis. Simulation of diffraction patterns with different stacking faults mainly reveal the presence of rotational stacking faults with a probability of about 40% .
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	München	Editor
	Language		Wos	000271325700024	Publication Date	2009-08-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0930-486X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	16	Open Access
	Notes	Iap			Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:79987			Serial	1735
Permanent link to this record



	Author	Barreca, D.; Gasparotto, A.; Maccato, C.; Tondello, E.; Lebedev, O.I.; Van Tendeloo, G.
	Title	CVD of copper oxides from a \beta-diketonate diamine precursor: tailoring the nano-organization			Type	A1 Journal article
	Year	2009	Publication	Crystal growth & design	Abbreviated Journal	Cryst Growth Des
	Volume	9	Issue	5	Pages	2470-2480
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	A copper(II) hexafluoroacetylacetonate (1,1,1,5,5,5-hexafluoro-2,4-pentanedionate, hfa) adduct with N,N,N¡ä,N¡ä-tetramethylethylenediamine (TMEDA) [Cu(hfa)2¡¤TMEDA] is used for the first time as precursor for the chemical vapor deposition (CVD) of copper oxide nanosystems. The syntheses are carried out under both O2 and O2+H2O reaction atmospheres on Si(100) substrates, at temperatures ranging between 250 and 550 ¡ãC. Subsequently, the interrelations between the preparative conditions and the system composition, nanostructure, and morphology are elucidated by means of complementary analytical techniques [Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron and X-ray excited auger electron spectroscopies (XPS and XE-AES), glancing incidence X-ray diffraction (GIXRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM)]. The obtained data revealed a gradual transformation from Cu2O, to Cu2O + CuO, to CuO nanosystems upon increasing the deposition temperature from 250 to 550 ¡ãC under both growth atmospheres. Such a phenomenon was accompanied by a progressive morphological evolution from continuous films to 1D hyperbranched nanostructures. Water vapor introduction in the deposition environment enabled to lower the deposition temperature and resulted in a higher aggregate interconnection, attributed to a higher density of nucleation centers.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000265892200066	Publication Date	2009-05-06
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1528-7483;1528-7505;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.055	Times cited	60	Open Access
	Notes	Esteem 026019			Approved	Most recent IF: 4.055; 2009 IF: 4.162
	Call Number	UA @ lucian @ c:irua:77053			Serial	597
Permanent link to this record



	Author	Bogaerts, A.
	Title	Hybrid Monte Carlo: fluid model for studying the effects of nitrogen addition to argon glow discharges			Type	A1 Journal article
	Year	2009	Publication	Spectrochimica acta: part B : atomic spectroscopy	Abbreviated Journal	Spectrochim Acta B
	Volume	64	Issue	2	Pages	126-140
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	A computer model is developed for describing argon/nitrogen glow discharges. The species taken into account in the model include electrons, Ar atoms in the ground state and in the 4s metastable levels, N2 molecules in the ground state and in six different electronically excited levels, N atoms, Ar+ ions, N+, N2+, N3+ and N4+ ions. The fast electrons are simulated with a Monte Carlo model, whereas all other species are treated in a fluid model. 74 different chemical reactions are considered in the model. The calculation results include the densities of all the different plasma species, as well as information on their production and loss processes. The effect of different N2 additions, in the range between 0.1 and 10%, is investigated.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000263621300002	Publication Date	2008-12-02
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0584-8547;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.241	Times cited	49	Open Access
	Notes				Approved	Most recent IF: 3.241; 2009 IF: 2.719
	Call Number	UA @ lucian @ c:irua:72829			Serial	1525
Permanent link to this record



	Author	Bach, D.; Schneider, R.; Gerthsen, D.; Verbeeck, J.; Sigle, W.
	Title	EELS of niobium and stoichiometric niobium-oxide phases: part 1: plasmon and Near-edges fine structure			Type	A1 Journal article
	Year	2009	Publication	Microscopy and microanalysis	Abbreviated Journal	Microsc Microanal
	Volume	15	Issue	6	Pages	505-523
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	A comprehensive electron energy-loss spectroscopy study of niobium (Nb) and stable Nb-oxide phases (NbO, NbO2, Nb2O5) was carried out. In this work (Part I), the plasmons and energy-loss near-edge structures (ELNES) of all relevant Nb edges (Nb-N2,3, Nb-M4,5, Nb-M2,3, Nb-M1, and Nb-L2,3) up to energy losses of about 2600 eV and the O-K edge are analyzed with respect to achieving characteristic fingerprints of Nb in different formal oxidation states (0 for metallic Nb, +2 for NbO, +4 for NbO2, and +5 for Nb2O5). Chemical shifts of the Nb-N2,3, Nb-M4,5, Nb-M2,3, and Nb-L2,3 edges are extracted from the spectra that amount to about 4 eV as the oxidation state increases from 0 for Nb to +5 for Nb2O5. Four different microscopes, including a 200 keV ZEISS Libra with monochromator, were used. The corresponding wide range of experimental parameters with respect to the primary electron energy, convergence, and collection semi-angles as well as energy resolution allows an assessment of the influence of the experimental setup on the ELNES of the different edges. Finally, the intensity of the Nb-L2,3 white-line edges is correlated with niobium 4d-state occupancy in the different reference materials.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge, Mass.	Editor
	Language		Wos	000272433200005	Publication Date	2009-10-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1431-9276;1435-8115;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.891	Times cited	55	Open Access
	Notes				Approved	Most recent IF: 1.891; 2009 IF: 3.035
	Call Number	UA @ lucian @ c:irua:80320UA @ admin @ c:irua:80320			Serial	790
Permanent link to this record



	Author	Lind, O.C.; Salbu, B.; Skipperud, L.; Janssens, K.; Jaroszewicz, J.; de Nolf, W.
	Title	Solid state speciation and potential bioavailability of depleted uranium particles from Kosovo and Kuwait			Type	A1 Journal article
	Year	2009	Publication	Journal of environmental radioactivity	Abbreviated Journal	J Environ Radioactiv
	Volume	100	Issue	4	Pages	301-307
	Keywords	A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation)
	Abstract	A combination of synchrotron radiation based X-ray microscopic techniques (ì-XRF, ì-XANES, ì-XRD) applied on single depleted uranium (DU) particles and semi-bulk leaching experiments has been employed to link the potential bioavailability of DU particles to site-specific particle characteristics. The oxidation states and crystallographic forms of U in DU particles have been determined for individual particles isolated from selected samples collected at different sites in Kosovo and Kuwait that were contaminated by DU ammunition during the 1999 Balkan conflict and the 1991 Gulf war. Furthermore, small soil or sand samples heavily contaminated with DU particles were subjected to simulated gastrointestinal fluid (0.16 M HCl) extractions. Characteristics of DU particles in Kosovo soils collected in 2000 and in Kuwait soils collected in 2002 varied significantly depending on the release scenario and to some extent on weathering conditions. Oxidized U (+6) was determined in large, fragile and bright yellow DU particles released during fire at a DU ammunition storage facility and crystalline phases such as schoepite (UO3·2.25H2O), dehydrated schoepite (UO3·0.75H2O) and metaschoepite (UO3·2.0H2O) were identified. As expected, these DU particles were rapidly dissolved in 0.16 M HCl (84 ± 3% extracted after 2 h) indicating a high degree of potential mobility and bioavailability. In contrast, the 2 h extraction of samples contaminated with DU particles originating either from corrosion of unspent DU penetrators or from impacted DU ammunition appeared to be much slower (2030%) as uranium was less oxidized (+4 to +6). Crystalline phases such as UO2, UC and metallic U or UTi alloy were determined in impacted DU particles from Kosovo and Kuwait, while the UO2,34 phase, only determined in particles from Kosovo, could reflect a more corrosive environment. Although the results are based on a limited number of DU particles, they indicate that the structure and extractability of DU particles released from similar sources (metallic U penetrators) will depend on the release scenarios (fire, impact) and to some extent environmental conditions. However, most of the DU particles (7396%) in all investigated samples were dissolved in 0.16 M HCl after one week indicating that a majority of the DU material is bioaccessible.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000264649500004	Publication Date	2009-02-18
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0265-931x	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.31	Times cited	49	Open Access
	Notes				Approved	Most recent IF: 2.31; 2009 IF: 1.268
	Call Number	UA @ admin @ c:irua:76413			Serial	5834
Permanent link to this record



	Author	Bultinck, E.; Mahieu, S.; Depla, D.; Bogaerts, A.
	Title	Particle-in-cell/Monte Carlo collisions model for the reactive sputter deposition of nitride layers			Type	A1 Journal article
	Year	2009	Publication	Plasma processes and polymers	Abbreviated Journal	Plasma Process Polym
	Volume	6	Issue	S:1	Pages	S784-S788
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	A 2d3v Particle-in-cell/Monte Carlo collisions (PIC/MCC) model was constructed for an Ar/N2 reactive gas mixture in a magnetron discharge. A titanium target was used, in order to study the sputter deposition of a TiNx thin film. Cathode currents and voltages were calculated self-consistently and compared with experiments. Also, ion fluxes to the cathode were calculated, which cause sputtering of the target. The sputtered atom fluxes from the target, and to the substrate were calculated, in order to visualize the deposition of the TiNx film.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Weinheim	Editor
	Language		Wos	000272302900149	Publication Date	2009-09-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1612-8850;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.846	Times cited	2	Open Access
	Notes				Approved	Most recent IF: 2.846; 2009 IF: 4.037
	Call Number	UA @ lucian @ c:irua:79364			Serial	2558
Permanent link to this record



	Author	Van Aert, S.; Verbeeck, J.; Bals, S.; Erni, R.; van Dyck, D.; Van Tendeloo, G.
	Title	Atomic resolution mapping using quantitative high-angle annular dark field scanning transmission electron microscopy			Type	A1 Journal article
	Year	2009	Publication	Microscopy and microanalysis	Abbreviated Journal	Microsc Microanal
	Volume	15	Issue	S:2	Pages	464-465
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge, Mass.	Editor
	Language		Wos	000208119100230	Publication Date	2009-07-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1431-9276;1435-8115;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.891	Times cited	1	Open Access
	Notes				Approved	Most recent IF: 1.891; 2009 IF: 3.035
	Call Number	UA @ lucian @ c:irua:96555UA @ admin @ c:irua:96555			Serial	178
Permanent link to this record