|
Records |
|
Author |
Schalm, O.; Crabbé, A.; Storme, P.; Wiesinger, R.; Gambirasi, A.; Grieten, E.; Tack, P.; Bauters, S.; Kleber, C.; Favaro, M.; Schryvers, D.; Vincze, L.; Terryn, H.; Patelli, A. |
|
Title |
The corrosion process of sterling silver exposed to a Na2S solution: monitoring and characterizing the complex surface evolution using a multi-analytical approach |
Type |
A1 Journal article |
|
Year |
2016 |
Publication |
Applied Physics A-Materials Science & Processing |
Abbreviated Journal |
Appl Phys A-Mater |
|
Volume |
122 |
Issue |
122 |
Pages |
903 |
|
Keywords |
A1 Journal article; Electron Microscopy for Materials Science (EMAT); |
|
Abstract |
Many historical ‘silver’ objects are composed of sterling silver, a silver alloy containing small amounts of copper. Besides the dramatic impact of copper on the corrosion process, the chemical composition of the corrosion layer evolves continuously. The evolution of the surface during the exposure to a Na2S solution was monitored by means of visual observation at macroscopic level, chemical analysis at microscopic level and analysis at the nanoscopic level. The corrosion process starts with the preferential oxidation of copper, forming mixtures of oxides and sulphides while voids are being created beneath the corrosion layer. Only at a later stage, the silver below the corrosion layer is consumed. This results in the formation of jalpaite and at a later stage of acanthite. The acanthite is found inside the corrosion layer at the boundaries of jalpaite grains and as individual grains between the jalpaite grains but also as a thin film on top of the corrosion layer. The corrosion process could be described as a sequence of 5 subsequent surface states with transitions between these states. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
|
Editor |
|
|
Language |
|
Wos |
000384753800033 |
Publication Date |
2016-09-20 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
0947-8396 |
ISBN |
|
Additional Links |
|
|
Impact Factor |
1.455 |
Times cited |
9 |
Open Access |
|
|
Notes |
The authors are grateful for the financial support by the EU-FP7 Grant PANNA No. 282998 and for the opportunity to perform SR-XPS measurements at the NanoESCA beamline of the Elettra storage ring, under the approval of the advisory Committee (Proposal No. 20135164), as well as the opportunity to perform XANES measurements at the DUBBLE beamline of the ESRF storage ring (Proposal No. 26-01-990). The authors are grateful for the financial support by the STIMPRO Project FFB150215 of the University of Antwerp. Pieter Tack is funded by a Ph.D. Grant of the Agency for Innovation by Science and Technology (IWT). We would also like to thank Peter Van den Haute for the XRD measurements that were performed at the University of Ghent. |
Approved |
Most recent IF: 1.455 |
|
Call Number |
EMAT @ emat @ |
Serial |
4331 |
Permanent link to this record |
|
|
|
|
Author |
Pittarello, L.; Mckibbin, S.; Yamaguchi, A.; Ji, G.; Schryvers, D.; Debaille, V.; Claeys, P. |
|
Title |
Two generations of exsolution lamellae in pyroxene from Asuka 09545 : Clues to the thermal evolution of silicates in mesosiderite |
Type |
A1 Journal article |
|
Year |
2019 |
Publication |
The American mineralogist |
Abbreviated Journal |
Am Mineral |
|
Volume |
104 |
Issue |
11 |
Pages |
1663-1672 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
Abstract |
Mesosiderite meteorites consist of a mixture of crustal basaltic or gabbroic material and metal. Their formation process is still debated due to their unexpected combination of crust and core materials, possibly derived from the same planetesimal parent body, and lacking an intervening mantle component. Mesosiderites have experienced an extremely slow cooling rate from ca. 550 degrees C, as recorded in the metal (0.25-0.5 degrees C/Ma). Here we present a detailed investigation of exsolution features in pyroxene from the Antarctic mesosiderite Asuka (A) 09545. Geothermobarometry calculations, lattice parameters, lamellae orientation, and the presence of clinoenstatite as the host were used in an attempt to constrain the evolution of pyroxene from 1150 to 570 degrees C and the formation of two generations of exsolution lamellae. After pigeonite crystallization at ca. 1150 degrees C, the first exsolution process generated the thick augite lamellae along (100) in the temperature interval 1000-900 degrees C. By further cooling, a second order of exsolution lamellae formed within augite along (001), consisting of monoclinic low-Ca pyroxene, equilibrated in the temperature range 900-800 degrees C. The last process, occurring in the 600-500 degrees C temperature range, was likely the inversion of high to low pigeonite in the host crystal, lacking evidence for nucleation of orthopyroxene. The formation of two generations of exsolution lamellae, as well as of likely metastable pigeonite, suggest non-equilibrium conditions. Cooling was sufficiently slow to allow the formation of the lamellae, their preservation, and the transition from high to low pigeonite. In addition, the preservation of such fine-grained lamellae limits long-lasting, impact reheating to a peak temperature lower than 570 degrees C. These features, including the presence of monoclinic low-Ca pyroxene as the host, are reported in only a few mesosiderites. This suggests a possibly different origin and thermal history from most mesosiderites and that the crystallography (i.e., space group) of low-Ca pyroxene could be used as parameter to distinguish mesosiderite populations based on their cooling history. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
|
Editor |
|
|
Language |
|
Wos |
000494707400014 |
Publication Date |
2019-08-22 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
0003-004x |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
2.021 |
Times cited |
|
Open Access |
|
|
Notes |
|
Approved |
Most recent IF: 2.021 |
|
Call Number |
UA @ admin @ c:irua:164645 |
Serial |
6331 |
Permanent link to this record |
|
|
|
|
Author |
Zelaya, E.; Esquivel, M.R.; Schryvers, D. |
|
Title |
Evolution of the phase stability of NiAl under low energy ball milling |
Type |
A1 Journal article |
|
Year |
2013 |
Publication |
Advanced powder technology |
Abbreviated Journal |
Adv Powder Technol |
|
Volume |
24 |
Issue |
6 |
Pages |
1063-1069 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
Abstract |
Low energy mechanical alloying of Ni35 at.%Al and Ni40 at.%Al material was performed and the resulting structures were investigated by XRD and TEM. The final intermetallics observed consist of two phases, NiAl(B2) and Ni3Al while 7R and 3R martensite was observed in post-annealed samples. Different integrated milling times were associated to the intermetallic consolidation and initial blend dissociation. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
Zeist |
Editor |
|
|
Language |
|
Wos |
000339175000024 |
Publication Date |
2013-03-30 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
0921-8831; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
2.659 |
Times cited |
10 |
Open Access |
|
|
Notes |
Fwo |
Approved |
Most recent IF: 2.659; 2013 IF: 1.642 |
|
Call Number |
UA @ lucian @ c:irua:107345 |
Serial |
1102 |
Permanent link to this record |
|
|
|
|
Author |
Van Aert, S.; Turner, S.; Delville, R.; Schryvers, D.; Van Tendeloo, G.; Salje, E.K.H. |
|
Title |
Direct observation of ferrielectricity at ferroelastic domain boundaries in CaTiO3 by electron microscopy |
Type |
A1 Journal article |
|
Year |
2012 |
Publication |
Advanced materials |
Abbreviated Journal |
Adv Mater |
|
Volume |
24 |
Issue |
4 |
Pages |
523-527 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
Abstract |
High-resolution aberration-corrected transmission electron microscopy aided by statistical parameter estimation theory is used to quantify localized displacements at a (110) twin boundary in orthorhombic CaTiO3. The displacements are 36 pm for the Ti atoms and confined to a thin layer. This is the first direct observation of the generation of ferroelectricity by interfaces inside this material which opens the door for domain boundary engineering. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
Weinheim |
Editor |
|
|
Language |
|
Wos |
000299156400011 |
Publication Date |
2011-12-24 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
0935-9648; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
19.791 |
Times cited |
150 |
Open Access |
|
|
Notes |
Fwo |
Approved |
Most recent IF: 19.791; 2012 IF: 14.829 |
|
Call Number |
UA @ lucian @ c:irua:94110 |
Serial |
717 |
Permanent link to this record |
|
|
|
|
Author |
Idrissi, H.; Wang, B.; Colla, M.S.; Raskin, J.P.; Schryvers, D.; Pardoen, T. |
|
Title |
Ultrahigh strain hardening in thin palladium films with nanoscale twins |
Type |
A1 Journal article |
|
Year |
2011 |
Publication |
Advanced materials |
Abbreviated Journal |
Adv Mater |
|
Volume |
23 |
Issue |
18 |
Pages |
2119-2122 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
Abstract |
Nanocrystalline Pd thin films containing coherent growth twin boundaries are deformed using on-chip nanomechanical testing. A large work-hardening capacity is measured. The origin of the observed behavior is unraveled using transmission electron microscopy and shows specific dislocations and twin boundaries interactions. The results indicate the potential for large strength and ductility balance enhancement in Pd films, as needed in membranes for H technologies. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
Weinheim |
Editor |
|
|
Language |
|
Wos |
000291164200013 |
Publication Date |
2011-04-04 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
0935-9648; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
19.791 |
Times cited |
57 |
Open Access |
|
|
Notes |
Iap |
Approved |
Most recent IF: 19.791; 2011 IF: 13.877 |
|
Call Number |
UA @ lucian @ c:irua:90103 |
Serial |
3794 |
Permanent link to this record |
|
|
|
|
Author |
Gonnissen, J.; Batuk, D.; Nataf, G.F.; Jones, L.; Abakumov, A.M.; Van Aert, S.; Schryvers, D.; Salje, E.K.H. |
|
Title |
Direct Observation of Ferroelectric Domain Walls in LiNbO3: Wall-Meanders, Kinks, and Local Electric Charges |
Type |
A1 Journal article |
|
Year |
2016 |
Publication |
Advanced functional materials |
Abbreviated Journal |
Adv Funct Mater |
|
Volume |
26 |
Issue |
26 |
Pages |
7599-7604 |
|
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
|
Abstract |
Direct observations of the ferroelectric domain boundaries in LiNbO3 are performed using high-resolution high-angle annular dark field scanning transmission electron microscopy imaging, revealing a very narrow width of the domain wall between the 180° domains. The domain walls demonstrate local side-way meandering, which results in inclinations even when the overall wall orientation follows the ferroelectric polarization. These local meanders contain kinks with “head-to-head” and “tail-to-tail” dipolar configurations and are therefore locally charged. The charged meanders are confined to a few cation layers along the polarization direction and are separated by longer stretches of straight domain walls. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
|
Editor |
|
|
Language |
|
Wos |
000388166700006 |
Publication Date |
2016-09-16 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1616-301X |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
12.124 |
Times cited |
23 |
Open Access |
|
|
Notes |
J.G. acknowledges the support from the Research Foundation Flanders (FWO, Belgium) through various project fundings (G.0368.15N, G.0369.15N, and G.0374.13N), as well as the financial support from the European Union Seventh Framework Program (FP7/2007–2013) under Grant agreement no. 312483 (ESTEEM2). The authors thank J. Hadermann for useful suggestions on the interpretation of the HAADFSTEM images. E.K.H.S. thanks the EPSRC (EP/K009702/1) and the Leverhulme Trust (EM-2016-004) for support. G.F.N. thanks the National Research Fund, Luxembourg (FNR/P12/4853155/Kreisel) for support.; esteem2_jra2 |
Approved |
Most recent IF: 12.124 |
|
Call Number |
c:irua:135336 c:irua:135336 |
Serial |
4129 |
Permanent link to this record |
|
|
|
|
Author |
Chen, Z.; Tan, Z.; Ji, G.; Schryvers, D.; Ouyang, Q.; Li, Z. |
|
Title |
Effect of interface evolution on thermal conductivity of vacuum hot pressed SiC/Al composites |
Type |
A1 Journal article |
|
Year |
2015 |
Publication |
Advanced engineering materials |
Abbreviated Journal |
Adv Eng Mater |
|
Volume |
17 |
Issue |
17 |
Pages |
1076-1084 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
Abstract |
The SiC/Al composites have been fabricated by a vacuum hot pressing (VHP) process in order to study the effect of interface evolution on the global thermal conductivity (TC). By optimizing the VHP parameters of sintering temperature and time, the three different kinds of SiC/Al interface configurations, that is, non-bonded, diffusion-bonded, and reaction-bonded interfaces, are formed and identified by measurement of relative density, X-ray diffraction, scanning and (high-resolution) transmission electron microscopy. The VHPed composite sintered at 655 °C for 60 min is fully dense and presents a tightly-adhered and clean SiC/Al interface at the nanoscale, the ideal diffusion-bonded interface being the most favorable for minimizing interfacial thermal resistance, which in turn results in the highest TC of around 270 W/mK. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
Weinheim |
Editor |
|
|
Language |
|
Wos |
000357680700019 |
Publication Date |
2015-01-02 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1438-1656; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
2.319 |
Times cited |
9 |
Open Access |
|
|
Notes |
|
Approved |
Most recent IF: 2.319; 2015 IF: 1.758 |
|
Call Number |
c:irua:123000 |
Serial |
818 |
Permanent link to this record |
|
|
|
|
Author |
Wang, X.; Kustov, S.; Li, K.; Schryvers, D.; Verlinden, B.; Van Humbeeck, J. |
|
Title |
Effect of nanoprecipitates on the transformation behavior and functional properties of a Ti50.8 at.% Ni alloy with micron-sized grains |
Type |
A1 Journal article |
|
Year |
2015 |
Publication |
Acta materialia |
Abbreviated Journal |
Acta Mater |
|
Volume |
82 |
Issue |
82 |
Pages |
224-233 |
|
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
|
Abstract |
In order to take advantage of both grain refinement and precipitation hardening effects, nanoscaled Ni4Ti3 precipitates are introduced in a Ti50.8 at.% Ni alloy with micron-sized grains (average grain size of 1.7 μm). Calorimetry, electrical resistance studies and thermomechanical tests were employed to study the transformation behavior and functional properties in relation to the obtained microstructure. A significant suppression of martensite transformation by the obtained microstructure is observed. The thermomechanical tests show that the advantageous properties of both grain refinement and precipitation hardening are combined in the developed materials, resulting in superior shape memory characteristics and stability of pseudoelasticity. It is concluded that introducing nanoscaled Ni4Ti3 precipitates into small grains is a new approach to improve the functional properties of NiTi shape memory alloys. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
|
Language |
|
Wos |
000347017800021 |
Publication Date |
2014-10-04 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1359-6454; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
5.301 |
Times cited |
51 |
Open Access |
|
|
Notes |
Fwo |
Approved |
Most recent IF: 5.301; 2015 IF: 4.465 |
|
Call Number |
c:irua:120469 |
Serial |
824 |
Permanent link to this record |
|
|
|
|
Author |
Yang, Z.; Tirry, W.; Lamoen, D.; Kulkova, S.; Schryvers, D. |
|
Title |
Electron energy-loss spectroscopy and first-principles calculation studies on a Ni-Ti shape memory alloy |
Type |
A1 Journal article |
|
Year |
2008 |
Publication |
Acta materialia |
Abbreviated Journal |
Acta Mater |
|
Volume |
56 |
Issue |
3 |
Pages |
395-404 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
Abstract |
|
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
|
Language |
|
Wos |
000253020900011 |
Publication Date |
2007-12-01 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1359-6454; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
5.301 |
Times cited |
20 |
Open Access |
|
|
Notes |
Goa; Ec Rtn; Fwo |
Approved |
Most recent IF: 5.301; 2008 IF: 3.729 |
|
Call Number |
UA @ lucian @ c:irua:67462 |
Serial |
931 |
Permanent link to this record |
|
|
|
|
Author |
Berg, L.K.; Gjønnes, J.; Hansen, V.; Li, X.Z.; Knutson-Wedel, M.; Waterloo, G.; Schryvers, D.; Wallenberg, L.R. |
|
Title |
GP-zones in Al-Zn-Mg alloys and their role in artificial aging |
Type |
A1 Journal article |
|
Year |
2001 |
Publication |
Acta materialia |
Abbreviated Journal |
Acta Mater |
|
Volume |
49 |
Issue |
|
Pages |
3443-3451 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
Abstract |
|
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
|
Language |
|
Wos |
000171445700006 |
Publication Date |
2002-07-25 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1359-6454; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
5.301 |
Times cited |
261 |
Open Access |
|
|
Notes |
|
Approved |
Most recent IF: 5.301; 2001 IF: 2.658 |
|
Call Number |
UA @ lucian @ c:irua:48363 |
Serial |
1361 |
Permanent link to this record |
|
|
|
|
Author |
Colla, M.-S.; Wang, B.; Idrissi, H.; Schryvers, D.; Raskin, J.-P.; Pardoen, T. |
|
Title |
High strength-ductility of thin nanocrystalline palladium films with nanoscale twins : on-chip testing and grain aggregate model |
Type |
A1 Journal article |
|
Year |
2012 |
Publication |
Acta materialia |
Abbreviated Journal |
Acta Mater |
|
Volume |
60 |
Issue |
4 |
Pages |
1795-1806 |
|
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
|
Abstract |
The mechanical behaviour of thin nanocrystalline palladium films with an ∼30 nm in plane grain size has been characterized on chip under uniaxial tension. The films exhibit a large strain hardening capacity and a significant increase in the strength with decreasing thickness. Transmission electron microscopy has revealed the presence of a moderate density of growth nanotwins interacting with dislocations. A semi-analytical grain aggregate model is proposed to investigate the impact of different contributions to the flow behaviour, involving the effect of twins, of grain size and of the presence of a thin surface layer. This model provides guidelines to optimizing the strength/ductility ratio of the films. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
|
Language |
|
Wos |
000301989500035 |
Publication Date |
2012-02-02 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1359-6454; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
5.301 |
Times cited |
38 |
Open Access |
|
|
Notes |
Iap |
Approved |
Most recent IF: 5.301; 2012 IF: 3.941 |
|
Call Number |
UA @ lucian @ c:irua:94213 |
Serial |
1465 |
Permanent link to this record |
|
|
|
|
Author |
Rotaru, G.-M.; Tirry, W.; Sittner, P.; van Humbeeck, J.; Schryvers, D. |
|
Title |
Microstructural study of equiatomic PtTi martensite and the discovery of a new long-period structure |
Type |
A1 Journal article |
|
Year |
2007 |
Publication |
Acta materialia |
Abbreviated Journal |
Acta Mater |
|
Volume |
55 |
Issue |
13 |
Pages |
4447-4454 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
Abstract |
|
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
|
Language |
|
Wos |
000248436400021 |
Publication Date |
2007-06-04 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1359-6454; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
5.301 |
Times cited |
7 |
Open Access |
|
|
Notes |
Fwo G.0465.05; Multimat |
Approved |
Most recent IF: 5.301; 2007 IF: 3.624 |
|
Call Number |
UA @ lucian @ c:irua:65849 |
Serial |
2047 |
Permanent link to this record |
|
|
|
|
Author |
Delville, R.; Malard, B.; Pilch, J.; Schryvers, D. |
|
Title |
Microstructure changes during non-conventional heat treatment of thin NiTi wires by pulsed electric current studied by transmission electron microscopy |
Type |
A1 Journal article |
|
Year |
2010 |
Publication |
Acta materialia |
Abbreviated Journal |
Acta Mater |
|
Volume |
58 |
Issue |
13 |
Pages |
4503-4515 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
Abstract |
Transmission electron microscopy, electrical resistivity measurements and mechanical testing were employed to investigate the evolution of microstructure and functional superelastic properties of 0.1 mm diameter as-drawn NiTi wires subjected to a non-conventional heat treatment by controlled electric pulse currents. This method enables a better control of the recovery and recrystallization processes taking place during the heat treatment and accordingly a better control on the final microstructure. Using a stepwise approach of millisecond pulse annealing, it is shown how the microstructure evolves from a severely deformed state with no functional properties to an optimal nanograined microstructure (2050 nm) that is partially recovered through polygonization and partially recrystallized and that has the best functional properties. Such a microstructure is highly resistant against dislocation slip upon cycling, while microstructures annealed for longer times and showing mostly recrystallized grains were prone to dislocation slip, particularly as the grain size exceeds 200 nm. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
|
Language |
|
Wos |
000279787100020 |
Publication Date |
2010-06-02 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1359-6454; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
5.301 |
Times cited |
110 |
Open Access |
|
|
Notes |
Multimat; FWO
IAA |
Approved |
Most recent IF: 5.301; 2010 IF: 3.791 |
|
Call Number |
UA @ lucian @ c:irua:83279 |
Serial |
2062 |
Permanent link to this record |
|
|
|
|
Author |
Bartova, B.; Wiese, N.; Schryvers, D.; Chapman, J.N.; Ignacova, S. |
|
Title |
Microstructure of precipitates and magnetic domain structure in an annealed Co38Ni33Al29 shape memory alloy |
Type |
A1 Journal article |
|
Year |
2008 |
Publication |
Acta materialia |
Abbreviated Journal |
Acta Mater |
|
Volume |
56 |
Issue |
16 |
Pages |
4470-4476 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
Abstract |
The microstructure of a Co38Ni33Al29 ferromagnetic shape memory alloy was determined by conventional transmission electron microscopy (TEM), electron diffraction studies together with advanced microscopy techniques and in situ Lorentz microscopy. Rod-like precipitates, 1060 nm long, of hexagonal close-packed -Co were confirmed to be present by high-resolution TEM. The orientation relationship between the precipitates and B2 matrix is described by the Burgers orientation relationship. The crystal structure of the martensite obtained after cooling is tetragonal L10 with a (111) twinning plane. The magnetic domain structure was determined during an in situ cooling experiment using the Fresnel mode of Lorentz microscopy. While transformation proceeds from B2 austenite to L10 martensite, new domains are nucleated, leading to a decrease in domain width, with the magnetization lying predominantly along a single direction. It was possible to completely describe the relationship between magnetic domains and crystallographic directions in the austenite phase though complications existed for the martensite phase. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
|
Language |
|
Wos |
000259931300033 |
Publication Date |
2008-06-11 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1359-6454; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
5.301 |
Times cited |
23 |
Open Access |
|
|
Notes |
Multimat |
Approved |
Most recent IF: 5.301; 2008 IF: 3.729 |
|
Call Number |
UA @ lucian @ c:irua:72321 |
Serial |
2072 |
Permanent link to this record |
|
|
|
|
Author |
Boullay, P.; Schryvers, D.; Ball, J.M. |
|
Title |
Nano-structures at martensite macrotwin interfaces in Ni65Al35 |
Type |
A1 Journal article |
|
Year |
2003 |
Publication |
Acta materialia |
Abbreviated Journal |
Acta Mater |
|
Volume |
51 |
Issue |
5 |
Pages |
1421-1436 |
|
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
|
Abstract |
The atomic configurations at macrotwin interfaces between microtwinned martensite plates in Ni65Al35 material are investigated using transmission electron microscopy. The observed structures are interpreted in view of possible formation mechanisms for these interfaces. A distinction is made between cases in which the microtwins, originating from mutually perpendicular {110} austenite planes, enclose a final angle larger or smaller than 90degrees. Two different configurations, a crossing and a step type are described. Depending on the actual case, tapering, bending and tip splitting of the smaller microtwinvariants are observed. The most reproducible deformations occur in a region of approximately 5-10 nm width around the interface while a variety of structural defects are observed further away from the interface. These structures and deformations are interpreted in terms of the coalescence of two separately nucleated microtwinned martensite plates and the need to accommodate remaining stresses. (C) 2003 Acta Materialia Inc. Published by Elsevier Science Ltd. All rights reserved. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
|
Language |
|
Wos |
000181677700018 |
Publication Date |
2003-03-14 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1359-6454; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
5.301 |
Times cited |
31 |
Open Access |
|
|
Notes |
|
Approved |
Most recent IF: 5.301; 2003 IF: 3.059 |
|
Call Number |
UA @ lucian @ c:irua:48364 |
Serial |
2248 |
Permanent link to this record |
|
|
|
|
Author |
Potapov, P.L.; Ochin, P.; Pons, J.; Schryvers, D. |
|
Title |
Nanoscale inhomogeneities in melt-spun Ni-Al |
Type |
A1 Journal article |
|
Year |
2000 |
Publication |
Acta materialia |
Abbreviated Journal |
Acta Mater |
|
Volume |
48 |
Issue |
|
Pages |
3833-3845 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
Abstract |
|
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
|
Language |
|
Wos |
000089632800003 |
Publication Date |
2002-07-25 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1359-6454; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
5.301 |
Times cited |
28 |
Open Access |
|
|
Notes |
|
Approved |
Most recent IF: 5.301; 2000 IF: 2.166 |
|
Call Number |
UA @ lucian @ c:irua:48362 |
Serial |
2265 |
Permanent link to this record |
|
|
|
|
Author |
Idrissi, H.; Renard, K.; Ryelandt, L.; Schryvers, D.; Jacques, P.J. |
|
Title |
On the mechanism of twin formation in FeMnC TWIP steels |
Type |
A1 Journal article |
|
Year |
2010 |
Publication |
Acta materialia |
Abbreviated Journal |
Acta Mater |
|
Volume |
58 |
Issue |
7 |
Pages |
2464-2476 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
Abstract |
Although it is well known that FeMnC TWIP steels exhibit high work-hardening rates, the elementary twinning mechanisms controlling the plastic deformation of these steels have still not been characterized. The aim of the present study is to analyse the extended defects related to the twinning occurrence using transmission electron microscopy. Based on these observations, the very early stage of twin nucleation can be attributed to the pole mechanism with deviation proposed by Cohen and Weertman or to the model of Miura, Takamura and Narita, while the twin growth is controlled by the pole mechanism proposed by Venables. High densities of sessile Frank dislocations are observed within the twins at the early stage of deformation, which can affect the growth and the stability of the twins, but also the strength of these twins and their interactions with the gliding dislocations present in the matrix. This experimental evidence is discussed and compared to recent results in order to relate the defects analysis to the macroscopic behaviour of this category of material. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
|
Language |
|
Wos |
000276523200018 |
Publication Date |
2010-01-25 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1359-6454; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
5.301 |
Times cited |
244 |
Open Access |
|
|
Notes |
Iap |
Approved |
Most recent IF: 5.301; 2010 IF: 3.791 |
|
Call Number |
UA @ lucian @ c:irua:82270 |
Serial |
2441 |
Permanent link to this record |
|
|
|
|
Author |
Tirry, W.; Schryvers, D. |
|
Title |
Quantitative determination of strain fields around Ni4Ti3 precipitates in NiTi |
Type |
A1 Journal article |
|
Year |
2005 |
Publication |
Acta materialia |
Abbreviated Journal |
Acta Mater |
|
Volume |
53 |
Issue |
4 |
Pages |
1041-1049 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
Abstract |
|
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
|
Language |
|
Wos |
000226774500014 |
Publication Date |
2004-12-14 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1359-6454; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
5.301 |
Times cited |
97 |
Open Access |
|
|
Notes |
|
Approved |
Most recent IF: 5.301; 2005 IF: 3.430 |
|
Call Number |
UA @ lucian @ c:irua:55686 |
Serial |
2750 |
Permanent link to this record |
|
|
|
|
Author |
Cao, S.; Nishida, M.; Schryvers, D. |
|
Title |
Quantitative three-dimensional analysis of Ni4Ti3 precipitate morphology and distribution in polycrystalline Ni-Ti |
Type |
A1 Journal article |
|
Year |
2011 |
Publication |
Acta materialia |
Abbreviated Journal |
Acta Mater |
|
Volume |
59 |
Issue |
4 |
Pages |
1780-1789 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
Abstract |
The three-dimensional size, morphology and distribution of Ni4Ti3 precipitates in a Ni50.8Ti49.2 polycrystalline shape memory alloy with a heterogeneous microstructure have been investigated using a focused ion beam/scanning electron microscopy slice-and-view procedure. The mean volume, central plane diameter, thickness, aspect ratio and sphericity of the precipitates in the grain interior as well as near to the grain boundary were measured and/or calculated. The morphology of the precipitates was quantified by determining the equivalent ellipsoids with the same moments of inertia and classified according to the Zingg scheme. Also, the pair distribution functions describing the three-dimensional distributions were obtained from the coordinates of the precipitate mass centres. Based on this new data it is suggested that the existence of the heterogeneous microstructure could be due to a very small concentration gradient in the grains of the homogenized material and that the resulting multistage martensitic transformation originates in strain effects related to the size of the precipitates and scale differences of the available B2 matrix in between the precipitates. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
|
Language |
|
Wos |
000287265100045 |
Publication Date |
2010-12-20 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1359-6454; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
5.301 |
Times cited |
34 |
Open Access |
|
|
Notes |
Fwo |
Approved |
Most recent IF: 5.301; 2011 IF: 3.755 |
|
Call Number |
UA @ lucian @ c:irua:85533 |
Serial |
2766 |
Permanent link to this record |
|
|
|
|
Author |
Shi, H.; Frenzel, J.; Martinez, G.T.; Van Rompaey, S.; Bakulin, A.; Kulkova, A.; Van Aert, S.; Schryvers, D. |
|
Title |
Site occupation of Nb atoms in ternary Ni-Ti-Nb shape memory alloys |
Type |
A1 Journal article |
|
Year |
2014 |
Publication |
Acta materialia |
Abbreviated Journal |
Acta Mater |
|
Volume |
74 |
Issue |
|
Pages |
85-95 |
|
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
|
Abstract |
Nb occupancy in the austenite B2-NiTi matrix and Ti2Ni phase in NiTiNb shape memory alloys was investigated by aberration-corrected scanning transmission electron microscopy and precession electron diffraction. In both cases, Nb atoms were found to prefer to occupy the Ti rather than Ni sites. A projector augmented wave method within density functional theory was used to calculate the atomic and electronic structures of the austenitic B2-NiTi matrix phase and the Ti2Ni precipitates both with and without addition of Nb. The obtained formation energies and analysis of structural and electronic characteristics explain the preference for Ti sites for Nb over Ni sites. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
|
Language |
|
Wos |
000338621400009 |
Publication Date |
2014-05-08 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1359-6454; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
5.301 |
Times cited |
21 |
Open Access |
|
|
Notes |
|
Approved |
Most recent IF: 5.301; 2014 IF: 4.465 |
|
Call Number |
UA @ lucian @ c:irua:118334 |
Serial |
3028 |
Permanent link to this record |
|
|
|
|
Author |
Seo, J.W.; Schryvers, D. |
|
Title |
TEM investigation of the microstructure and defects of CuZr martensite: 1: morphology and twin systems |
Type |
A1 Journal article |
|
Year |
1998 |
Publication |
Acta materialia |
Abbreviated Journal |
Acta Mater |
|
Volume |
46 |
Issue |
|
Pages |
1165-1175 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
Abstract |
|
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
|
Language |
|
Wos |
000072289100009 |
Publication Date |
2002-07-25 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1359-6454; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
5.301 |
Times cited |
46 |
Open Access |
|
|
Notes |
|
Approved |
Most recent IF: 5.301; 1998 IF: 1.834 |
|
Call Number |
UA @ lucian @ c:irua:48360 |
Serial |
3479 |
Permanent link to this record |
|
|
|
|
Author |
Seo, J.W.; Schryvers, D. |
|
Title |
TEM investigation of the microstructure and defects of CuZr martensite: 2: planar defects |
Type |
A1 Journal article |
|
Year |
1998 |
Publication |
Acta materialia |
Abbreviated Journal |
Acta Mater |
|
Volume |
46 |
Issue |
|
Pages |
1177-1183 |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
|
Abstract |
|
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
|
Language |
|
Wos |
000072289100010 |
Publication Date |
2002-07-25 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1359-6454; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
5.301 |
Times cited |
21 |
Open Access |
|
|
Notes |
|
Approved |
Most recent IF: 5.301; 1998 IF: 1.834 |
|
Call Number |
UA @ lucian @ c:irua:48361 |
Serial |
3480 |
Permanent link to this record |
|
|
|
|
Author |
Chen, X.; Cao, S.; Ikeda, T.; Srivastava, V.; Snyder, G.J.; Schryvers, D.; James, R.D. |
|
Title |
A weak compatibility condition for precipitation with application to the microstructure of PbTe-Sb2Te3 thermoelectrics |
Type |
A1 Journal article |
|
Year |
2011 |
Publication |
Acta materialia |
Abbreviated Journal |
Acta Mater |
|
Volume |
59 |
Issue |
15 |
Pages |
6124-6132 |
|
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
|
Abstract |
We propose a weak condition of compatibility between phases applicable to cases exhibiting full or partial coherence and Widmanstätten microstructure. The condition is applied to the study of Sb2Te3 precipitates in a PbTe matrix in a thermoelectric alloy. The weak condition of compatibility predicts elongated precipitates lying on a cone determined by a transformation stretch tensor. Comparison of this cone with the long directions of precipitates determined by a slice-and-view method of scanning electron microscopy combined with focused ion beam sectioning shows good agreement between theory and experiment. A further study of the morphology of precipitates by the Eshelby method suggests that interfacial energy also plays a role and gives an approximate value of interfacial energy per unit area of 250 dyn cm−1. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
|
Language |
|
Wos |
000294086900026 |
Publication Date |
2011-07-22 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1359-6454; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
5.301 |
Times cited |
8 |
Open Access |
|
|
Notes |
|
Approved |
Most recent IF: 5.301; 2011 IF: 3.755 |
|
Call Number |
UA @ lucian @ c:irua:92388 |
Serial |
3911 |
Permanent link to this record |
|
|
|
|
Author |
Amin-Ahmadi, B.; Connétable, D.; Fivel, M.; Tanguy, D.; Delmelle, R.; Turner, S.; Malet, L.; Godet, S.; Pardoen, T.; Proost, J.; Schryvers, D.; Idrissi, H. |
|
Title |
Dislocation/hydrogen interaction mechanisms in hydrided nanocrystalline palladium films |
Type |
A1 Journal article |
|
Year |
2016 |
Publication |
Acta materialia |
Abbreviated Journal |
Acta Mater |
|
Volume |
111 |
Issue |
111 |
Pages |
253-261 |
|
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
|
Abstract |
The nanoscale plasticity mechanisms activated during hydriding cycles in sputtered nanocrystalline Pd films have been investigated ex-situ using advanced transmission electron microscopy techniques. The internal stress developing within the films during hydriding has been monitored in-situ. Results showed that in Pd films hydrided to β-phase, local plasticity was mainly controlled by dislocation activity in spite of the small grain size. Changes of the grain size distribution and the crystallographic texture have not been observed. In contrast, significant microstructural changes were not observed in Pd films hydrided to α-phase. Moreover, the effect of hydrogen loading on the nature and density of dislocations has been investigated using aberration-corrected TEM. Surprisingly, a high density of shear type stacking faults has been observed after dehydriding, indicating a significant effect of hydrogen on the nucleation energy barriers of Shockley partial dislocations. Ab-initio calculations of the effect of hydrogen on the intrinsic stable and unstable stacking fault energies of palladium confirm the experimental observations. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
|
Editor |
|
|
Language |
|
Wos |
000375812100027 |
Publication Date |
2016-04-06 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1359-6454 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
5.301 |
Times cited |
14 |
Open Access |
|
|
Notes |
This work was carried out in the framework of the IAP program of the Belgian State Federal Office for Scientific, Technical and Cultural Affairs, under Contract No. P7/21. The support of the FWO research project G012012N “Understanding nanocrystalline mechanical behaviour from structural investigations” for B. Amin-Ahmadi is also gratefully acknowledged. This work was granted access to the HPC resources of CALMIP (CICT Toulouse, France) under the allocations 2014-p0912 and 2014-p0749. |
Approved |
Most recent IF: 5.301 |
|
Call Number |
c:irua:132678 |
Serial |
4054 |
Permanent link to this record |
|
|
|
|
Author |
van der Rest, A.; Idrissi, H.; Henry, F.; Favache, A.; Schryvers, D.; Proost, J.; Raskin, J.-P.; Van Overmeere, Q.; Pardoen, T. |
|
Title |
Mechanical behavior of ultrathin sputter deposited porous amorphous Al2O3 films |
Type |
A1 Journal article |
|
Year |
2017 |
Publication |
Acta materialia |
Abbreviated Journal |
Acta Mater |
|
Volume |
125 |
Issue |
125 |
Pages |
27-37 |
|
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
|
Abstract |
The determination of the mechanical properties of porous amorphous Al2O3 thin films is essential to address reliability issues in wear-resistant, optical and electronic coating applications. Testing the mechanical properties of Al2O3 films thinner than 200 nm is challenging, and the link between the mechanical behavior and the microstructure of such films is largely unknown. Herein, we report on the elastic and viscoplastic mechanical properties of amorphous Al2O3 thin films synthesized by reactive magnetron sputtering using a combination of internal stress, nanoindentation, and on-chip uniaxial tensile testing, together with mechanical homogenization models to separate the effect of porosity from intrinsic variations of the response of the sound material. The porosity is made of voids with 2e30 nm diameter. The Young's modulus and hardness of the films decrease by a factor of two when the deposition pressure increases from 1.2 to 8 mTorr. The contribution of porosity was found to be small, and a change in the atomic structure of the amorphous Al2O3 matrix is hypothesized to be the main contributing factor. The activation volume associated to the viscoplastic deformation mechanism is around 100 Å3. Differences in the atomic structure of the films could not be revealed by electron diffraction, pointing to a minute effect of atomic arrangement on the elastic properties. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
|
Editor |
|
|
Language |
|
Wos |
000394201500003 |
Publication Date |
2016-12-02 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1359-6454 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
5.301 |
Times cited |
5 |
Open Access |
OpenAccess |
|
Notes |
This work has been funded by the Belgian Science Policy through the IAP 7/21 project. The support of the ‘Fonds Belge pour la Recherche dans l’Industrie et l’Agriculture (FRIA)’ for A.v.d.R. is also gratefully acknowledged, as well as the support of FNRS through the grant PDR T.0122.13 “Mecano”. |
Approved |
Most recent IF: 5.301 |
|
Call Number |
EMAT @ emat @ c:irua:138990 |
Serial |
4330 |
Permanent link to this record |
|
|
|
|
Author |
Ghidelli, M.; Idrissi, H.; Gravier, S.; Blandin, J.-J.; Raskin, J.-P.; Schryvers, D.; Pardoen, T. |
|
Title |
Homogeneous flow and size dependent mechanical behavior in highly ductile Zr 65 Ni 35 metallic glass films |
Type |
A1 Journal article |
|
Year |
2017 |
Publication |
Acta materialia |
Abbreviated Journal |
Acta Mater |
|
Volume |
131 |
Issue |
131 |
Pages |
246-259 |
|
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
|
Abstract |
Motivated by recent studies demonstrating a high strength – high ductility potential of nano-scale metallic glass samples, the mechanical response of freestanding Zr65Ni35 film with sub-micron thickness has been investigated by combining advanced on-chip tensile testing and electron microscopy. Large deformation up to 15% is found for specimen thicknesses below 500 nm with variations depending on specimen size and frame compliance. The deformation is homogenous until fracture, with no evidence of shear banding. The yield stress is doubled when decreasing the specimen cross-section, reaching ~3 GPa for small cross-sections. The fracture strain variation is related to both the stability of the test device and to the specimen size. The study concludes on clear disconnect between the mechanisms controlling the onset of plasticity and the fracture process. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
|
Editor |
|
|
Language |
|
Wos |
000402343400023 |
Publication Date |
2017-03-31 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1359-6454 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
5.301 |
Times cited |
42 |
Open Access |
OpenAccess |
|
Notes |
This work has been funded by the Belgian Science Policy through the IAP 7/21 project. We acknowledge IDS-FunMat for the PhD financial support.We thank the Renatech network and the PTA (Plateforme Technologique Amont) in Grenoble (France) for TFMG deposition facilities. The WINFAB infrastructure at the UCL and the help of R. Vayrette and M. Coulombier for the on-chip tests. H. Idrissi is currently mandated by the Belgian National Fund for Scientific Research (FSR-FNRS). |
Approved |
Most recent IF: 5.301 |
|
Call Number |
EMAT @ emat @ c:irua:142642 |
Serial |
4562 |
Permanent link to this record |
|
|
|
|
Author |
Cautaerts, N.; Delville, R.; Stergar, E.; Schryvers, D.; Verwerft, M. |
|
Title |
Characterization of (Ti,Mo,Cr)C nanoprecipitates in an austenitic stainless steel on the atomic scale |
Type |
A1 Journal article |
|
Year |
2019 |
Publication |
Acta materialia |
Abbreviated Journal |
Acta Mater |
|
Volume |
164 |
Issue |
|
Pages |
90-98 |
|
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
|
Abstract |
Nanometer sized (Ti,Mo,Cr)C (MX-type) precipitates that grew in a 24% cold worked Ti-stabilized austenitic stainless steel (grade DIN 1.4970, member of the 15-15Ti austenitic stainless steels) after heat treatment were fully characterized with transmission electron microscopy (TEM), probe corrected high angle annular dark field scanning transmission electron microscopy (HR-HAADF STEM), and atom probe tomography (APT). The precipitates shared the cube-on-cube orientation with the matrix and were facetted on {111} planes, yielding octahedral and elongated octahedral shapes. The misfit dislocations were believed to have Burgers vectors a/6<112> which was verified by geometrical phase analysis (GPA) strain mapping of a matrix-precipitate interface. The dislocations were spaced five to seven atomic
planes apart, on average slightly wider than expected for the lattice parameters of steel and TiC. Quantitative atom probe tomography analysis of the precipitates showed that precipitates were significantly enriched in Mo, Cr and V, and that they were hypostoichiometric with respect to C. These findings were consistent with a reduced lattice parameter. The precipitates were found primarily on Shockley
partial dislocations originating from the original perfect dislocation network. These novel findings could contribute to the understanding of how TiC nanoprecipitates interact with point defects and matrix dislocations. This is essential for the application of these Ti-stabilized steels in high temperature environments or fast spectrum nuclear fission reactors. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
|
Editor |
|
|
Language |
|
Wos |
000456902800008 |
Publication Date |
2018-10-11 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1359-6454 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
5.301 |
Times cited |
2 |
Open Access |
Not_Open_Access: Available from 12.10.2020
|
|
Notes |
This work was supported by ENGIE [contract number 2015-AC- 007 e BSUEZ6900]; the U.S. Department of Energy, Office of Nuclear Energy under DOE Idaho Operations Office Contract DE-AC07- 051D14517 as part of a Nuclear Science User Facilities experiment; and by the MYRRHA program in development at SCKCEN, Belgium. Special thanks to Dr. H. Mezerji and Dr. T. Altantzis for the work on the FEI Titan microscope.We also want to thank Ms. J. Burns for the help on the FIB and Dr. Y. Wu at CAES for conducting the APT measurements. |
Approved |
Most recent IF: 5.301 |
|
Call Number |
EMAT @ emat @c:irua:154873UA @ admin @ c:irua:154873 |
Serial |
5060 |
Permanent link to this record |
|
|
|
|
Author |
Cautaerts, N.; Delville, R.; Stergar, E.; Pakarinen, J.; Verwerft, M.; Yang, Y.; Hofer, C.; Schnitzer, R.; Lamm, S.; Felfer, P.; Schryvers, D. |
|
Title |
The role of Ti and TiC nanoprecipitates in radiation resistant austenitic steel: A nanoscale study |
Type |
A1 Journal article |
|
Year |
2020 |
Publication |
Acta Materialia |
Abbreviated Journal |
Acta Mater |
|
Volume |
197 |
Issue |
|
Pages |
184-197 |
|
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
|
Abstract |
This work encompasses an in-depth transmission electron microscopy and atom probe tomography study of Ti-stabilized austenitic steel irradiated with Fe-ions. The focus is on radiation induced segregation and precipitation, and in particular on how Ti and TiC affect these processes. A 15-15Ti steel (grade: DIN 1.4970) in two thermo-mechanical states (cold-worked and aged) was irradiated at different temperatures up to a dose of 40 dpa. At low irradiation temperatures, the cold-worked and aged materials evolved to a similar microstructure dominated by small Si and Ni clusters, corresponding to segregation to small point defect clusters. TiC precipitates, initially present in the aged material, were found to be unstable under these irradiation conditions. Elevated irradiation temperatures resulted in the nucleation of nanometer sized Cr enriched TiC precipitates surrounded by Si and Ni enriched shells. In addition, nanometer sized Ti- and Mn-enriched G-phase (M6Ni16Si7) precipitates formed, often attached to TiC precipitates. Post irradiation, larger number densities of TiC were observed in the cold-worked material compared to the aged material. This was correlated with a lower volume fraction of G-phase. The findings suggest that at elevated irradiation temperatures, the precipitate-matrix interface is an important point defect sink and contributes to the improved radiation resistance of this material. The study is a first of its kind on stabilized steel and demonstrates the significance of the small Ti addition to the evolution of the microstructure under irradiation. (C) 2020 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
|
Editor |
|
|
Language |
|
Wos |
000564767000001 |
Publication Date |
2020-07-10 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1359-6454 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
9.4 |
Times cited |
|
Open Access |
Not_Open_Access |
|
Notes |
; This work was supported by ENGIE [contract number 2015-AC-007 e BSUEZ6900]; the U.S. Department of Energy, Office of Nuclear Energy under DOE Idaho Operations Office Contract DE-AC07051D14517 as part of a Nuclear Science User Facilities experiment; and by the MYRRHA program at SCK-CEN, Belgium. Funding of the Austrian BMK (846933) in the framework of the program “Production of the future” and the “BMK Professorship for Industry” is gratefully acknowledged. We want to thank the staffat MIBL for assisting with the ion irradiations as well as the staffat CAES for assisting with FIB work and conducting APT measurements. ; |
Approved |
Most recent IF: 9.4; 2020 IF: 5.301 |
|
Call Number |
UA @ admin @ c:irua:171956 |
Serial |
6626 |
Permanent link to this record |
|
|
|
|
Author |
Ghidelli, M.; Orekhov, A.; Bassi, A.L.; Terraneo, G.; Djemia, P.; Abadias, G.; Nord, M.; Béché, A.; Gauquelin, N.; Verbeeck, J.; Raskin, J.-p.; Schryvers, D.; Pardoen, T.; Idrissi, H. |
|
Title |
Novel class of nanostructured metallic glass films with superior and tunable mechanical properties |
Type |
A1 Journal article |
|
Year |
2021 |
Publication |
Acta Materialia |
Abbreviated Journal |
Acta Mater |
|
Volume |
|
Issue |
|
Pages |
116955 |
|
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
|
Abstract |
A novel class of nanostructured Zr50Cu50 (%at.) metallic glass films with superior and tunable mechanical
properties is produced by pulsed laser deposition. The process can be controlled to synthetize a wide
range of film microstructures including dense fully amorphous, amorphous embedded with nanocrystals
and amorphous nano-granular. A unique dense self-assembled nano-laminated atomic arrangement
characterized by alternating Cu-rich and Zr/O-rich nanolayers with different local chemical enrichment
and amorphous or amorphous-crystalline composite nanostructure has been discovered, while
significant in-plane clustering is reported for films synthetized at high deposition pressures. This unique
nanoarchitecture is at the basis of superior mechanical properties including large hardness and elastic
modulus up to 10 and 140 GPa, respectively and outstanding total elongation to failure (>9%), leading to
excellent strength/ductility balance, which can be tuned by playing with the film architecture. These
results pave the way to the synthesis of novel class of engineered nanostructured metallic glass films
with high structural performances attractive for a number of applications in microelectronics and
coating industry. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
|
Editor |
|
|
Language |
|
Wos |
000670077800004 |
Publication Date |
2021-05-12 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1359-6454 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
5.301 |
Times cited |
27 |
Open Access |
OpenAccess |
|
Notes |
H.I. is mandated by the Belgian National Fund for Scientific Research (FSR-FNRS). This work was supported by the Fonds de la Recherche Scientifique – FNRS under Grant T.0178.19 and Grant CDR– J011320F. We acknowledge funding for the direct electron detector used in the 4D stem studies from the Hercules fund 'Direct electron detector for soft matter TEM' from the Flemish Government J.V acknowledges funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 823717 – ESTEEM3. A.O. has received partial funding from the GOA project “Solarpaint” of the University of Antwerp. A.B. and J.V. acknowledge funding through FWO project G093417N ('Compressed sensing enabling low dose imaging in transmission electron microscopy') from the Flanders Research Fund. M.G. and A.L.B acknowledge Chantelle Ekanem for support in PLD depositions. |
Approved |
Most recent IF: 5.301 |
|
Call Number |
EMAT @ emat @c:irua:178142 |
Serial |
6761 |
Permanent link to this record |
|
|
|
|
Author |
Yang, M.; Orekhov, A.; Hu, Z.-Y.; Feng, M.; Jin, S.; Sha, G.; Li, K.; Samaee, V.; Song, M.; Du, Y.; Van Tendeloo, G.; Schryvers, D. |
|
Title |
Shearing and rotation of β'' and β' precipitates in an Al-Mg-Si alloy under tensile deformation : in-situ and ex-situ studies |
Type |
A1 Journal article |
|
Year |
2021 |
Publication |
Acta Materialia |
Abbreviated Journal |
Acta Mater |
|
Volume |
220 |
Issue |
|
Pages |
117310 |
|
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
|
Abstract |
The interaction between dislocations and nano-precipitates during deformation directly influences hardening response of precipitation-strengthening metals such as Al-Mg-Si alloys. However, how coherent and semi-coherent nano-precipitates accommodate external deformation applied to an Al alloy remains to be elucidated. In-situ tensile experiments in a transmission electron microscope (TEM) were conducted to study the dynamic process of dislocations cutting through coherent needle-like beta '' precipitates with diameters of 3 similar to 8 nm. Comprehensive investigations using in-situ, ex-situ TEM and atom probe tomography uncovered that beta '' precipitates were firstly sheared into small fragments, and then the rotation of the fragments, via sliding along precipitate/matrix interfaces, destroyed their initially coherent interface with the Al matrix. In contrast, semi-coherent beta' precipitates with sizes similar to beta '' were more difficult to be fragmented and accumulation of dislocations at the interface increased interface misfit between beta' and the Al matrix. Consequently, beta' precipitates could basically maintain their needle-like shape after the tensile deformation. This research gains new insights into the interaction between nano-precipitates and dislocations. (C) 2021 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved. |
|
Address |
|
|
Corporate Author |
|
Thesis |
|
|
Publisher |
|
Place of Publication |
|
Editor |
|
|
Language |
|
Wos |
000705535300005 |
Publication Date |
2021-09-12 |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
|
Series Volume |
|
Series Issue |
|
Edition |
|
|
ISSN |
1359-6454 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
|
Impact Factor |
5.301 |
Times cited |
|
Open Access |
OpenAccess |
|
Notes |
|
Approved |
Most recent IF: 5.301 |
|
Call Number |
UA @ admin @ c:irua:182528 |
Serial |
6884 |
Permanent link to this record |