NANOlab Center of Excellence literature database -- Query Results

	NANOlab Center of Excellence literature database Home \| Show All \| Simple Search \| Advanced Search	Login Quick Search: Field: contains: ...
	61–90 of 164 records found matching your query (RSS \| history):

Select All Deselect All

<< 1 2 3 4 5 6 >>

List View

Citations

Details

	Records
	Author	Meledina, M.; Turner, S.; Galvita, V.V.; Poelman, H.; Marin, G.B.; Van Tendeloo, G.
	Title	Local environment of Fe dopants in nanoscale Fe : CeO_2-x oxygen storage material			Type	A1 Journal article
	Year	2015	Publication	Nanoscale	Abbreviated Journal	Nanoscale
	Volume	7	Issue	7	Pages	3196-3204
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Nanoscale Fe : CeO2-x oxygen storage material for the process of chemical looping has been investigated by advanced transmission electron microscopy and electron energy-loss spectroscopy before and after a model looping procedure, consisting of redox cycles at heightened temperature. Separately, the activity of the nanomaterial has been tested in a toluene total oxidation reaction. The results show that the material consists of ceria nanoparticles, doped with single Fe atoms and small FeOx clusters. The iron ion is partially present as Fe3+ in a solid solution within the ceria lattice. Furthermore, enrichment of reduced Fe2+ species is observed in nanovoids present in the ceria nanoparticles, as well as at the ceria surface. After chemical looping, agglomeration occurs and reduced nanoclusters appear at ceria grain boundaries formed by sintering. These clusters originate from surface Fe2+ aggregation, and from bulk Fe3+, which “leaks out” in reduced state after cycling to a slightly more agglomerated form. The activity of Fe : CeO2 during the toluene total oxidation part of the chemical looping cycle is ensured by the dopant Fe in the Fe1-xCexO2 solid solution, and by surface Fe species. These measurements on a model Fe : CeO2-x oxygen storage material give a unique insight into the behavior of dopants within a nanosized ceria host, and allow to interpret a plethora of (doped) cerium oxide-based reactions.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge	Editor
	Language		Wos	000349473200046	Publication Date	2015-01-13
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2040-3364;2040-3372;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	7.367	Times cited	17	Open Access
	Notes				Approved	Most recent IF: 7.367; 2015 IF: 7.394
	Call Number	c:irua:125299			Serial	1828
Permanent link to this record



	Author	Shestakov, M.V.; Meledina, M.; Turner, S.; Baekelant, W.; Verellen, N.; Chen, X.; Hofkens, J.; Van Tendeloo, G.; Moshchalkov, V.V.
	Title	Luminescence of fixed site Ag nanoclusters in a simple oxyfluoride glass host and plasmon absorption of amorphous Ag nanoparticles in a complex oxyfluoride glass host			Type	P1 Proceeding
	Year	2015	Publication	Proceedings of the Society of Photo-optical Instrumentation Engineers T2 – 8th International Conference on Photonics, Devices, and System VI, AUG 27-29, 2014, Prague, CZECH REPUBLIC	Abbreviated Journal
	Volume		Issue		Pages	Unsp 94501n
	Keywords	P1 Proceeding; Electron microscopy for materials research (EMAT)
	Abstract	Ag nanocluster-doped glasses have been prepared by a conventional melt-quenching method. The effect of melt temperature and dwell time on the formation of Ag nanoclusters and Ag nanoparticles in simple host oxyfluoride glasses has been studied. The increase of melt temperature and dwell time results in the dissolution of Ag nanoparticles and substantial red-shift of absorption and photoluminescence spectra of the prepared glasses. The quantum yield of the glasses is similar to 5% and does not depend on melt temperature and dwell time. The prepared glasses may be used as red phosphors or down-conversion layers for solar-cells.
	Address
	Corporate Author				Thesis
	Publisher	Spie-int soc optical engineering	Place of Publication	Bellingham	Editor
	Language		Wos	000349404500057	Publication Date	2015-01-06
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume	9450	Series Issue		Edition
	ISSN	978-1-62841-566-7	ISBN		Additional Links	UA library record; WoS full record
	Impact Factor		Times cited		Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:144783			Serial	4668
Permanent link to this record



	Author	Pospisilova, A.; Filippov, S.K.; Bogomolova, A.; Turner, S.; Sedlacek, O.; Matushkin, N.; Cernochova, Z.; Stepanek, P.; Hruby, M.
	Title	Glycogen-graft-poly(2-alkyl-2-oxazolines) – the new versatile biopolymer-based thermoresponsive macromolecular toolbox			Type	A1 Journal article
	Year	2014	Publication	RSC advances	Abbreviated Journal	Rsc Adv
	Volume	4	Issue	106	Pages	61580-61588
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	This study is focused on thermoresponsive glycogen-graft-poly(2-alkyl-2-oxazolines), a new group of nanostructured hybrid dendrimeric stimuli-responsive polymers connecting the body's own biodegradable polysaccharidic dendrimer glycogen with the widely tuneable thermoresponsive behavior of polypeptide-analogic poly(2-alkyl-2-oxazolines), which are known to be biocompatible. Glycogen-graft-poly(2-alkyl-2-oxazolines) were prepared by a simple one-pot two-step procedure involving cationic ring-opening polymerization of 2-alkyl-2-oxazolines followed by termination of the living cationic ends with sodium glycogenate. As confirmed by light and X-ray scattering, as well as cryo-transmission electron microscopy, the grafted dendrimer structure allows easy adjustment of the cloud point temperature, the concentration dependence and nanostructure of the self-assembled phase separated polymer by crosstalk during graft composition, the graft length and the grafting density, in a very wide range.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000345656600045	Publication Date	2014-11-04
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2046-2069;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.108	Times cited	15	Open Access
	Notes				Approved	Most recent IF: 3.108; 2014 IF: 3.840
	Call Number	UA @ lucian @ c:irua:122222			Serial	1355
Permanent link to this record



	Author	Volkova, N.E.; Lebedev, O.I.; Gavrilova, L.Y.; Turner, S.; Gauquelin, N.; Seikh, M.M.; Caignaert, V.; Cherepanov, V.A.; Raveau, B.; Van Tendeloo, G.
	Title	Nanoscale ordering in oxygen deficient quintuple perovskite Sm_2-\epsilonBa_3+\epsilonFe₅O_15-\delta : implication for magnetism and oxygen stoichiometry			Type	A1 Journal article
	Year	2014	Publication	Chemistry of materials	Abbreviated Journal	Chem Mater
	Volume	26	Issue	21	Pages	6303-6310
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The investigation of the system SmBaFe-O in air has allowed an oxygen deficient perovskite Sm2-epsilon Ba3+epsilon Fe5O15-delta (delta = 0.75, epsilon = 0.125) to be synthesized. In contrast to the XRPD pattern which gives a cubic symmetry (a(p) = 3.934 angstrom), the combined HREM/EELS study shows that this phase is nanoscale ordered with a quintuple tetragonal cell, a(p) X a(p) X 5(ap). The nanodomains exhibit a unique stacking sequence of the A-site cationic layers along the crystallographic c-axis, namely SmBaBa/SmBa/SmBaSm, and are chemically twinned in the three crystallographic directions. The nanoscale ordering of this perovskite explains its peculiar magnetic properties on the basis of antiferromagnetic interactions with spin blockade at the boundary between the nanodomains. The variation of electrical conductivity and oxygen content of this oxide versus temperature suggest potential SOFC applications. They may be related to the particular distribution of oxygen vacancies in the lattice and to the 3d(5)(L) under bar configuration of iron.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000344905600029	Publication Date	2014-10-07
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0897-4756;1520-5002;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	9.466	Times cited	16	Open Access
	Notes	The UrFU authors were financially supported by the Ministry of Education and Science of Russian Federation (project N 4.1039.2014/K) and by UrFU under the Framework Program of development of UrFU through the «Young scientists UrFU» competition. The CRISMAT authors gratefully acknowledge the EC, the CNRS and the French Minister of Education and Research for financial support through their Research, Strategic and Scholarship programs. This work was supported by funding from the European Research Council under the Seventh Framework Program (FP7), ERC grant N°246791 – COUNTATOMS. S.T. gratefully acknowledges the fund for scientific research Flanders for a post-doctoral fellowship and for financial support under contract number G004413N. N.G. acknowledges funding from the European Research Council under the 7th Framework Program (FP7), ERC starting grant number 278510 – VORTEX; ECASJO_;			Approved	Most recent IF: 9.466; 2014 IF: 8.354
	Call Number	UA @ lucian @ c:irua:122137			Serial	2269
Permanent link to this record



	Author	Goris, B.; Turner, S.; Bals, S.; Van Tendeloo, G.
	Title	Three-dimensional valency mapping in ceria nanocrystals			Type	A1 Journal article
	Year	2014	Publication	ACS nano	Abbreviated Journal	Acs Nano
	Volume	8	Issue	10	Pages	10878-10884
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Using electron tomography combined with electron energy loss spectroscopy (EELS), we are able to map the valency of the Ce ions in CeO2-x nanocrystals in three dimensions. Our results show a clear facet-dependent reduction shell at the surface of ceria nanoparticles; {111} surface facets show a low surface reduction, whereas at {001} surface facets, the cerium ions are more likely to be reduced over a larger surface shell. Our generic tomographic technique allows a full 3D data cube to be reconstructed, containing an EELS spectrum in each voxel. This possibility enables a three-dimensional investigation of a plethora of material-specific physical properties such as valency, chemical composition, oxygen coordination, or bond lengths, triggering the synthesis of nanomaterials with improved properties.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000343952600126	Publication Date	2014-10-06
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1936-0851;1936-086X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	13.942	Times cited	85	Open Access	OpenAccess
	Notes	335078 Colouratom; 246791 Countatoms; Fwo; 312483 Esteem2; esteem2jra4; ECASSara; (ROMEO:white; preprint:; postprint:restricted 12 months embargo; pdfversion:cannot);			Approved	Most recent IF: 13.942; 2014 IF: 12.881
	Call Number	UA @ lucian @ c:irua:121219			Serial	3656
Permanent link to this record



	Author	Carraro, G.; Gasparotto, A.; Maccato, C.; Bontempi, E.; Lebedev, O.I.; Sada, C.; Turner, S.; Van Tendeloo, G.; Barreca, D.
	Title	Rational synthesis of F-doped iron oxides on Al2O3(0001) single crystals			Type	A1 Journal article
	Year	2014	Publication	RSC advances	Abbreviated Journal	Rsc Adv
	Volume	4	Issue	94	Pages	52140-52146
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	A plasma enhanced-chemical vapor deposition (PE-CVD) route to Fe2O3-based materials on Al2O3(0001) single crystals at moderate growth temperatures (200-400 degrees C) is reported. The use of the fluorinated Fe(hfa)(2)TMEDA (hfa = 1,1,1,5,5,5-hexafluoro-2,4-pentanedionate; TMEDA = N,N,N',N'-tetramethylethylenediamine) molecular precursor in Ar/O-2 plasmas enabled an in situ F-doping of iron oxide matrices, with a fluorine content tunable as a function of the adopted preparative conditions. Variations of the thermal energy supply enabled control of the system phase composition, resulting in gamma-Fe2O3 at 200 degrees C and alpha-Fe2O3 nanostructures at higher deposition temperatures. Notably, at 400 degrees C the formation of highly oriented alpha-Fe2O3 nanocolumns characterized by an epitaxial relation with the Al2O3(0001) substrate was observed. Beside fluorine content, phase composition and nano-organization, even the system optical properties and, in particular, energy gap values, could be tailored by proper modifications of processing parameters.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000344389000041	Publication Date	2014-10-02
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2046-2069;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.108	Times cited	4	Open Access
	Notes				Approved	Most recent IF: 3.108; 2014 IF: 3.840
	Call Number	UA @ lucian @ c:irua:121239			Serial	2813
Permanent link to this record



	Author	Carraro, G.; Gasparotto, A.; Maccato, C.; Bontempi, E.; Lebedev, O.I.; Sada, C.; Turner, S.; Van Tendeloo, G.; Barreca, D.
	Title	Rational synthesis of F-doped iron oxides on Al₂O₃(0001) single crystals			Type	A1 Journal article
	Year	2014	Publication	Rsc Advances	Abbreviated Journal	Rsc Adv
	Volume		Issue	94	Pages	52140-52146
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	A plasma enhanced-chemical vapor deposition (PE-CVD) route to Fe2O3-based materials on Al2O3(0001) single crystals at moderate growth temperatures (200400 °C) is reported. The use of the fluorinated Fe(hfa)2TMEDA (hfa = 1,1,1,5,5,5-hexafluoro-2,4-pentanedionate; TMEDA = N,N,N′,N′-tetramethylethylenediamine) molecular precursor in Ar/O2 plasmas enabled an in situ F-doping of iron oxide matrices, with a fluorine content tunable as a function of the adopted preparative conditions. Variations of the thermal energy supply enabled control of the system phase composition, resulting in γ-Fe2O3 at 200 °C and α-Fe2O3 nanostructures at higher deposition temperatures. Notably, at 400 °C the formation of highly oriented α-Fe2O3 nanocolumns characterized by an epitaxial relation with the Al2O3(0001) substrate was observed. Beside fluorine content, phase composition and nano-organization, even the system optical properties and, in particular, energy gap values, could be tailored by proper modifications of processing parameters.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000344389000041	Publication Date	2014-10-02
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2046-2069;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.108	Times cited	4	Open Access
	Notes				Approved	Most recent IF: 3.108; 2014 IF: 3.840
	Call Number	UA @ lucian @ c:irua:119529			Serial	2814
Permanent link to this record



	Author	Proost, J.; Blaffart, F.; Turner, S.; Idrissi, H.
	Title	On the Origin of Damped Electrochemical Oscillations at Silicon Anodes (Revisited)			Type	A1 Journal article
	Year	2014	Publication	ChemPhysChem : a European journal of chemical physics and physical chemistry	Abbreviated Journal	Chemphyschem
	Volume	15	Issue	14	Pages	3116-3124
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Electrochemical oscillations accompanying the formation of anodic silica have been shown in the past to be correlated with rather abrupt changes in the mechanical stress state of the silica film, commonly associated with some kind of fracture or porosification of the oxide. To advance the understanding on the origin of such oscillations in fluoride-free electrolytes, we have revisited a seminal experiment reported by Lehmann almost two decades ago. We thereby demonstrate that the oscillations are not stress-induced, and do not originate from a morphological transformation of the oxide in the course of anodisation. Alternatively, the mechanical features accompanying the oscillations can be explained by a partial relaxation of the field-induced electrostrictive stress. Furthermore, our observations suggest that the oscillation mechanism more likely results from a periodic depolarisation of the anodic silica.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Weinheim	Editor
	Language		Wos	000342770500029	Publication Date	2014-08-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1439-4235;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.075	Times cited	5	Open Access
	Notes				Approved	Most recent IF: 3.075; 2014 IF: 3.419
	Call Number	UA @ lucian @ c:irua:121086			Serial	2444
Permanent link to this record



	Author	Boulay, E.; Nakano, J.; Turner, S.; Idrissi, H.; Schryvers, D.; Godet, S.
	Title	Critical assessments and thermodynamic modeling of BaO-SiO₂ and SiO₂-TiO₂ systems and their extensions into liquid immiscibility in the BaO-SiO₂-TiO₂ system			Type	A1 Journal article
	Year	2014	Publication	Calphad computer coupling of phase diagrams and thermochemistry	Abbreviated Journal	Calphad
	Volume	47	Issue		Pages	68-82
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	This study discusses rational reproduction of liquid immiscibility in the BaO-SiO2-TiO2 system. While a ternary assessment requires sub-binary descriptions in the same thermodynamic model, the related sub-binary systems BaO-SiO2, BaO-TiO2 and SiO2-TiO2 liquid and solid phases have been evaluated using different thermodynamic models in the literature. In this study, BaO-SiO2 and SiO2-TiO2 were assessed using the Ionic Two Sublattice model (I2SL) based on experimental data from the literature. BaO-TiO2 was already assessed using this model. Binary descriptions developed were then used for the assessment of liquid immiscibility in the BaO-SiO2-TiO2 system. Ternary interaction parameters were found necessary for rational reproduction of the new ternary experimental data gathered in the present work. The model parameters for each system were evaluated using a CAPLHAD approach. A set of parameters is proposed. They show good agreement between the calculated and experimental equilibrium liquidus, liquid immiscibility and thermochemical properties in the BaO-SiO2-TiO2 system. (C) 2014 Elsevier Ltd. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000346224700008	Publication Date	2014-07-05
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0364-5916;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.6	Times cited	9	Open Access
	Notes				Approved	Most recent IF: 1.6; 2014 IF: 1.370
	Call Number	UA @ lucian @ c:irua:122776			Serial	540
Permanent link to this record



	Author	Mai, H.H.; Kaydashev, V.E.; Tikhomirov, V.K.; Janssens, E.; Shestakov, M.V.; Meledina, M.; Turner, S.; Van Tendeloo, G.; Moshchalkov, V.V.; Lievens, P.
	Title	Nonlinear optical properties of Ag nanoclusters and nanoparticles dispersed in a glass host			Type	A1 Journal article
	Year	2014	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	118	Issue	29	Pages	15995-16002
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The nonlinear absorption of Ag atomic clusters and nanoparticles dispersed in a transparent oxyfluoride glass host has been studied. The as-prepared glass, containing 0.15 atom % Ag, shows an absorption band in the UV/violet attributed to the presence of amorphous Ag atomic nanoclusters with an average size of 1.2 nm. Upon heat treatment the Ag nanoclusters coalesce into larger nanoparticles that show a surface plasmon absorption band in the visible. Open aperture z-scan experiments using 480 nm nanosecond laser pulses demonstrated nonsaturated and saturated nonlinear absorption with large nonlinear absorption indices for the Ag nanoclusters and nanoparticles, respectively. These properties are promising, e.g., for applications in optical limiting and objects contrast enhancement.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000339540700049	Publication Date	2014-07-01
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	43	Open Access
	Notes	FWO; Methusalem; funding from the European Research Council under the seventh Framework Program (FP7); ERC Grant 246791 COUNTATOMS and the EC project IFOX.			Approved	Most recent IF: 4.536; 2014 IF: 4.772
	Call Number	UA @ lucian @ c:irua:118626			Serial	2353
Permanent link to this record



	Author	Shen, Y.; Turner, S.; Yang, P.; Van Tendeloo, G.; Lebedev, O.I.; Wu, T.
	Title	Epitaxy-enabled vapor-liquid-solid growth of tin-doped indium oxide nanowires with controlled orientations			Type	A1 Journal article
	Year	2014	Publication	Nano letters	Abbreviated Journal	Nano Lett
	Volume	14	Issue	8	Pages	4342-4351
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Controlling the morphology of nanowires in bottom-up synthesis and assembling them on planar substrates is of tremendous importance for device applications in electronics, photonics, sensing and energy conversion. To date, however, there remain challenges in reliably achieving these goals of orientation-controlled nanowire synthesis and assembly. Here we report that growth of planar, vertical and randomly oriented tin-doped indium oxide (ITO) nanowires can be realized on yttria-stabilized zirconia (YSZ) substrates via the epitaxy-assisted vaporliquidsolid (VLS) mechanism, by simply regulating the growth conditions, in particular the growth temperature. This robust control on nanowire orientation is facilitated by the small lattice mismatch of 1.6% between ITO and YSZ. Further control of the orientation, symmetry and shape of the nanowires can be achieved by using YSZ substrates with (110) and (111), in addition to (100) surfaces. Based on these insights, we succeed in growing regular arrays of planar ITO nanowires from patterned catalyst nanoparticles. Overall, our discovery of unprecedented orientation control in ITO nanowires advances the general VLS synthesis, providing a robust epitaxy-based approach toward rational synthesis of nanowires.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington	Editor
	Language		Wos	000340446200022	Publication Date	2014-06-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1530-6984;1530-6992;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	12.712	Times cited	33	Open Access
	Notes	European Union Seventh Framework Programme under Grant 312483 – ESTEEM; FWOl; esteem2_ta			Approved	Most recent IF: 12.712; 2014 IF: 13.592
	Call Number	UA @ lucian @ c:irua:118622			Serial	1075
Permanent link to this record



	Author	Shenderova, O.; Vargas, A.; Turner, S.; Ivanov, D.M.; Ivanov, M.G.
	Title	Nanodiamond-based nanolubricants : investigation of friction surfaces			Type	A1 Journal article
	Year	2014	Publication	Tribology transactions	Abbreviated Journal	Tribol T
	Volume	57	Issue	6	Pages	1051-1057
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Synergistic compositions of detonation nanodiamond (DND) particles with polytetrafluoroethylene and molybdenum dialkyldithiophosphate were used in ring-on-ring, four-ball, and block-on-ring tests as an additive to polyalphaolefins and engine oils. Modest to significant reductions in the friction coefficients, wear, or both were observed. In the wear scars produced in the block-on-ring tests, the friction surfaces were characterized by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and profilometry. Significant polishing effects of the friction surfaces in lubricants containing DND were revealed in SEM observations and roughness measurements. The roughness of the scar surfaces produced in the presence of DND additives was about 35% lower than the roughness of the scars observed in pure oil experiments.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Park Ridge, Ill.	Editor
	Language		Wos	000345317900009	Publication Date	2014-06-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1040-2004;1547-397X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.685	Times cited	23	Open Access
	Notes				Approved	Most recent IF: 1.685; 2014 IF: 1.349
	Call Number	UA @ lucian @ c:irua:122161			Serial	2252
Permanent link to this record



	Author	Leus, K.; Liu, Y.-Y.; Meledina, M.; Turner, S.; Van Tendeloo, G.; van der Voort, P.
	Title	A Mo^VI grafted metal organic framework : synthesis, characterization and catalytic investigations			Type	A1 Journal article
	Year	2014	Publication	Journal of catalysis	Abbreviated Journal	J Catal
	Volume	316	Issue		Pages	201-209
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	We present the post-modification of a gallium based Metal Organic Framework, COMOC-4, with a Mo-complex. The resulting Mo@COMOC-4 was characterized by means of N2 sorption, XRPD, DRIFT, TGA, XRF, XPS and TEM analysis. The results demonstrate that even at high Mo-complex loadings on the framework, no aggregation or any Mo or Mo oxide species are formed. Moreover, the Mo@COMOC-4 was evaluated as a catalyst in the epoxidation of cyclohexene, cyclooctene and cyclododecene employing TBHP in decane as oxidant. The post-modified COMOC-4 exhibits a very high selectivity toward the epoxide (up to 100%). Regenerability and stability tests have been carried out demonstrating that the catalyst can be recycled without leaching of Mo or loss of crystallinity.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	San Diego, Calif.	Editor
	Language		Wos	000340853800020	Publication Date	2014-06-19
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0021-9517;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.844	Times cited	36	Open Access
	Notes	European Research Council under the Seventh Framework Program (FP7); ; ERC Grant No. 246791 – COUNTATOMS; Hercules; FWO			Approved	Most recent IF: 6.844; 2014 IF: 6.921
	Call Number	UA @ lucian @ c:irua:117416			Serial	3546
Permanent link to this record



	Author	Janssen, W.; Turner, S.; Sakr, G.; Jomard, F.; Barjon, J.; Degutis, G.; Lu, Y.G.; D'Haen, J.; Hardy, A.; Bael, M.V.; Verbeeck, J.; Van Tendeloo, G.; Haenen, K.
	Title	Substitutional phosphorus incorporation in nanocrystalline CVD diamond thin films			Type	A1 Journal article
	Year	2014	Publication	Physica status solidi: rapid research letters	Abbreviated Journal	Phys Status Solidi-R
	Volume	8	Issue	8	Pages	705-709
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Nanocrystalline diamond (NCD) thin films were produced by chemical vapor deposition (CVD) and doped by the addition of phosphine to the gas mixture. The characterization of the films focused on probing the incorporation and distribution of the phosphorus (P) dopants. Electron microscopy evaluated the overall film morphology and revealed the interior structure of the nanosized grains. The homogeneous films with distinct diamond grains featured a notably low sp(2):sp(3)-ratio as confirmed by Raman spectroscopy. High resolution spectroscopy methods demonstrated a homogeneous P-incorporation, both in-depth and in-plane. The P concentration in the films was determined to be in the order of 10(19) cm(-3) with a significant fraction integrated at substitutional donor sites. (C) 2014 WILEY-VCH Verlag GmbH Co. KGaA, Weinheim
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Berlin	Editor
	Language		Wos	000340484100007	Publication Date	2014-06-05
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1862-6254;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.032	Times cited	20	Open Access
	Notes	Fwo G055510n; G056810n; G.045612; 246791 Countatoms; 312483 Esteem2; esteem2_jra3			Approved	Most recent IF: 3.032; 2014 IF: 2.142
	Call Number	UA @ lucian @ c:irua:119220			Serial	3346
Permanent link to this record



	Author	Khaletskaya, K.; Turner, S.; Tu, M.; Wannapaiboon, S.; Schneemann, A.; Meyer, R.; Ludwig, A.; Van Tendeloo, G.; Fischer, R.A.
	Title	Self-directed localization of ZIF-8 thin film formation by conversion of ZnO nanolayers			Type	A1 Journal article
	Year	2014	Publication	Advanced functional materials	Abbreviated Journal	Adv Funct Mater
	Volume	24	Issue	30	Pages	4804-4811
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Control of localized metal-organic framework (MOF) thin film formation is a challenge. Zeolitic imidazolate frameworks (ZIFs) are an important sub-class of MOFs based on transition metals and imidazolate linkers. Continuous coatings of intergrown ZIF crystals require high rates of heterogeneous nucleation. In this work, substrates coated with zinc oxide layers are used, obtained by atomic layer deposition (ALD) or by magnetron sputtering, to provide the Zn2+ ions required for nucleation and localized growth of ZIF-8 films ([Zn(mim)(2)]; Hmim = 2-methylimidazolate). The obtained ZIF-8 films reveal the expected microporosity, as deduced from methanol adsorption studies using an environmentally controlled quartz crystal microbalance (QCM) and comparison with bulk ZIF-8 reference data. The concept is transferable to other MOFs, and is applied to the formation of [Al(OH)(1,4-ndc)](n) (ndc = naphtalenedicarboxylate) thin films derived from Al2O3 nanolayers.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Weinheim	Editor
	Language		Wos	000340549900010	Publication Date	2014-05-07
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1616-301X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	12.124	Times cited	77	Open Access
	Notes	312483 Esteem2; Fwo; esteem2_ta			Approved	Most recent IF: 12.124; 2014 IF: 11.805
	Call Number	UA @ lucian @ c:irua:119215			Serial	2975
Permanent link to this record



	Author	Heyer, S.; Janssen, W.; Turner, S.; Lu, Y.-G.; Yeap, W.S.; Verbeeck, J.; Haenen, K.; Krueger, A.
	Title	Toward deep blue nano hope diamonds : heavily boron-doped diamond nanoparticles			Type	A1 Journal article
	Year	2014	Publication	ACS nano	Abbreviated Journal	Acs Nano
	Volume	8	Issue	6	Pages	5757-5764
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The production of boron-doped diamond nanoparticles enables the application of this material for a broad range of fields, such as electrochemistry, thermal management, and fundamental superconductivity research. Here we present the production of highly boron-doped diamond nanoparticles using boron-doped CVD diamond films as a starting material. In a multistep milling process followed by purification and surface oxidation we obtained diamond nanoparticles of 1060 nm with a boron content of approximately 2.3 × 1021 cm3. Aberration-corrected HRTEM reveals the presence of defects within individual diamond grains, as well as a very thin nondiamond carbon layer at the particle surface. The boron K-edge electron energy-loss near-edge fine structure demonstrates that the B atoms are tetrahedrally embedded into the diamond lattice. The boron-doped diamond nanoparticles have been used to nucleate growth of a boron-doped diamond film by CVD that does not contain an insulating seeding layer.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000338089200039	Publication Date	2014-04-09
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1936-0851;1936-086X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	13.942	Times cited	71	Open Access
	Notes	the Research Foundation Flanders (FWO-Vlaanderen) (G.0555.10N;G.0568.10N; G.0456.12; G0044.13N and a postdoctoral scholarship for S.T.); EU FP7 through Marie Curie ITN “MATCON” (PITNGA-127 2009-238201)the Collaborative Project “DINAMO” (No. 245122) Integrated Infrastructure Initiative, Reference No. 312483-ESTEEM2.; esteem2_jra3			Approved	Most recent IF: 13.942; 2014 IF: 12.881
	Call Number	UA @ lucian @ c:irua:117599			Serial	3683
Permanent link to this record



	Author	Leusink, D.P.; Coneri, F.; Hoek, M.; Turner, S.; Idrissi, H.; Van Tendeloo, G.; Hilgenkamp, H.
	Title	Thin films of the spin ice compound Ho₂Ti₂O₇			Type	A1 Journal article
	Year	2014	Publication	APL materials	Abbreviated Journal	Apl Mater
	Volume	2	Issue	3	Pages	032101-32107
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The pyrochlore compounds Ho2Ti2O7 and Dy2Ti2O7 show an exotic form of magnetism called the spin ice state, resulting from the interplay between geometrical frustration and ferromagnetic coupling. A fascinating feature of this state is the appearance of magnetic monopoles as emergent excitations above the degenerate ground state. Over the past years, strong effort has been devoted to the investigation of these monopoles and other properties of the spin ice state in bulk crystals. Here, we report the fabrication of Ho2Ti2O7 thin films using pulsed laser deposition on yttria-stabilized ZrO2 substrates. We investigated the structural properties of these films by X-ray diffraction, scanning transmission electron microscopy, and atomic force microscopy, and the magnetic properties by vibrating sample magnetometry at 2 K. The films not only show a high crystalline quality, but also exhibit the hallmarks of a spin ice: a pronounced magnetic anisotropy and an intermediate plateau in the magnetization along the [111] crystal direction.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000334220300002	Publication Date	2014-03-04
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2166-532X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.335	Times cited	18	Open Access
	Notes	The authors acknowledge support from the Dutch FOM and NWO foundations and from the European Union under the Framework 7 program under a contract from an Integrated Infrastructure Initiative (Reference 312483 ESTEEM2). G.V.T. acknowledges the ERC Grant N246791- COUNTATOMS. S.T. gratefully acknowledges financial support from the Fund for Scientific Research Flanders (FWO). H.I. acknowledges the IAP program of the Belgian State Federal Office for Scientific, Technical and Cultural Affairs under Contract No. P7/21. The microscope used in this study was partially financed by the Hercules Foundation of the Flemish Government. The authors acknowledge fruitful interactions with A. Brinkman, M. G. Blamire, M. Egilmez, F. J. G. Roesthuis, J. N. Beukers, C. G. Molenaar, M. Veldhorst, and X. Renshaw Wang; esteem2_ta			Approved	Most recent IF: 4.335; 2014 IF: NA
	Call Number	UA @ lucian @ c:irua:115555			Serial	3641
Permanent link to this record



	Author	Stambula, S.; Gauquelin, N.; Bugnet, M.; Gorantla, S.; Turner, S.; Sun, S.; Liu, J.; Zhang, G.; Sun, X.; Botton, G.A.
	Title	Chemical structure of nitrogen-doped graphene with single platinum atoms and atomic clusters as a platform for the PEMFC electrode			Type	A1 Journal article
	Year	2014	Publication	The journal of physical chemistry: C : nanomaterials and interfaces	Abbreviated Journal	J Phys Chem C
	Volume	118	Issue	8	Pages	3890-3900
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	A platform for producing stabilized Pt atoms and clusters through the combination of an N-doped graphene support and atomic layer deposition (ALD) for the Pt catalysts was investigated using transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM). It was determined, using imaging and spectroscopy techniques, that a wide range of N-dopant types entered the graphene lattice through covalent bonds without largely damaging its structure. Additionally and most notably, Pt atoms and atomic clusters formed in the absence of nanoparticles. This work provides a new strategy for experimentally producing stable atomic and subnanometer cluster catalysts, which can greatly assist the proton exchange membrane fuel cell (PEMFC) development by producing the ultimate surface area to volume ratio catalyst.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000332188100004	Publication Date	2014-02-12
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-7447;1932-7455;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.536	Times cited	57	Open Access
	Notes	Fwo			Approved	Most recent IF: 4.536; 2014 IF: 4.772
	Call Number	UA @ lucian @ c:irua:115571			Serial	352
Permanent link to this record



	Author	Rehor, I.; Slegerova, J.; Kucka, J.; Proks, V.; Petrakova, V.; Adam, M.P.; Treussart, F.; Turner, S.; Bals, S.; Sacha, P.; Ledvina, M.; Wen, A.M.; Steinmetz, N.F.; Cigler, P.;
	Title	Fluorescent nanodiamonds embedded in biocompatible translucent shells			Type	A1 Journal article
	Year	2014	Publication	Small	Abbreviated Journal	Small
	Volume	10	Issue	6	Pages	1106-1115
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	High pressure high temperature (HPHT) nanodiamonds (NDs) represent extremely promising materials for construction of fluorescent nanoprobes and nanosensors. However, some properties of bare NDs limit their direct use in these applications: they precipitate in biological solutions, only a limited set of bio-orthogonal conjugation techniques is available and the accessible material is greatly polydisperse in shape. In this work, we encapsulate bright 30-nm fluorescent nanodiamonds (FNDs) in 1020-nm thick translucent (i.e., not altering FND fluorescence) silica shells, yielding monodisperse near-spherical particles of mean diameter 66 nm. High yield modification of the shells with PEG chains stabilizes the particles in ionic solutions, making them applicable in biological environments. We further modify the opposite ends of PEG chains with fluorescent dyes or vectoring peptide using click chemistry. High conversion of this bio-orthogonal coupling yielded circa 2000 dye or peptide molecules on a single FND. We demonstrate the superior properties of these particles by in vitro interaction with human prostate cancer cells: while bare nanodiamonds strongly aggregate in the buffer and adsorb onto the cell membrane, the shell encapsulated NDs do not adsorb nonspecifically and they penetrate inside the cells.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Weinheim	Editor
	Language		Wos	000333538000012	Publication Date	2014-02-05
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1613-6810;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	8.643	Times cited	79	Open Access	Not_Open_Access
	Notes	262348 ESMI; Hercules; FWO			Approved	Most recent IF: 8.643; 2014 IF: 8.368
	Call Number	UA @ lucian @ c:irua:115566			Serial	1234
Permanent link to this record



	Author	Batuk, M.; Turner, S.; Abakumov, A.M.; Batuk, D.; Hadermann, J.; Van Tendeloo, G.
	Title	Atomic structure of defects in anion-deficient perovskite-based ferrites with a crystallographic shear structure			Type	A1 Journal article
	Year	2014	Publication	Inorganic chemistry	Abbreviated Journal	Inorg Chem
	Volume	53	Issue	4	Pages	2171-2180
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Crystallographic shear (CS) planes provide a new structure-generation mechanism in the anion-deficient perovskites containing lone-pair cations. Pb2Sr2Bi2Fe6O16, a new n = 6 representative of the AnBnO3n2 homologous series of the perovskite-based ferrites with the CS structure, has been synthesized using the solid-state technique. The structure is built of perovskite blocks with a thickness of four FeO6 octahedra spaced by double columns of FeO5 edge-sharing distorted tetragonal pyramids, forming 1/2[110](101)p CS planes (space group Pnma, a = 5.6690(2) Å, b = 3.9108(1) Å, c = 32.643(1) Å). Pb2Sr2Bi2Fe6O16 features a wealth of microstructural phenomena caused by the flexibility of the CS planes due to the variable ratio and length of the constituting fragments with {101}p and {001}p orientation. This leads to the formation of waves, hairpins, Γ-shaped defects, and inclusions of the hitherto unknown layered anion-deficient perovskites Bi2(Sr,Pb)Fe3O8.5 and Bi3(Sr,Pb)Fe4O11.5. Using a combination of diffraction, imaging, and spectroscopic transmission electron microscopy techniques this complex microstructure was fully characterized, including direct determination of positions, chemical composition, and coordination number of individual atomic species. The complex defect structure makes these perovskites particularly similar to the CS structures in ReO3-type oxides. The flexibility of the CS planes appears to be a specific feature of the Sr-based system, related to the geometric match between the SrO perovskite layers and the {100}p segments of the CS planes.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Easton, Pa	Editor
	Language		Wos	000332144100039	Publication Date	2014-01-30
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0020-1669;1520-510X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.857	Times cited	6	Open Access
	Notes	Countatoms; FWO			Approved	Most recent IF: 4.857; 2014 IF: 4.762
	Call Number	UA @ lucian @ c:irua:113507			Serial	198
Permanent link to this record



	Author	Shenderova, O.; Hens, S.; Vlasov, I.; Turner, S.; Lu, Y.-G.; Van Tendeloo, G.; Schrand, A.; Burikov, S.A.; Dolenko, T.A.
	Title	Carbon-dot-decorated nanodiamonds			Type	A1 Journal article
	Year	2014	Publication	Particle and particle systems characterization	Abbreviated Journal	Part Part Syst Char
	Volume	31	Issue	5	Pages	580-590
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The synthesis of a new class of fluorescent carbon nanomaterials, carbon-dot-decorated nanodiamonds (CDD-ND), is reported. These CDD-NDs are produced by specific acid treatment of detonation soot, forming tiny rounded sp2 carbon species (carbon dots), 12 atomic layers thick and 12 nm in size, covalently attached to the surface of the detonation diamond nanoparticles. A combination of nanodiamonds bonded with a graphitic phase as a starting material and the application of graphite intercalated acids for oxidation of the graphitic carbon is necessary for the successful production of CDD-ND. The CDD-ND photoluminescence (PL) is stable, 20 times more intense than the intrinsic PL of well-purified NDs and can be tailored by changing the oxidation process parameters. Carbon-dot-decorated DNDs are shown to be excellent probes for bioimaging applications and inexpensive additives for PL nanocomposites.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Weinheim	Editor
	Language		Wos	000335518900008	Publication Date	2014-01-13
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0934-0866;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.474	Times cited	30	Open Access
	Notes	Fwo; 262348 Esmi; 246791 Countatoms			Approved	Most recent IF: 4.474; 2014 IF: 3.081
	Call Number	UA @ lucian @ c:irua:117332			Serial	280
Permanent link to this record



	Author	Zhang, G.; Turner, S.; Ekimov, E.A.; Vanacken, J.; Timmermans, M.; Samuely, T.; Sidorov, V.A.; Stishov, S.M.; Lu, Y.; Deloof, B.; Goderis, B.; Van Tendeloo, G.; Van de Vondel, J.; Moshchalkov, V.V.;
	Title	Global and local superconductivity in boron-doped granular diamond			Type	A1 Journal article
	Year	2014	Publication	Advanced materials	Abbreviated Journal	Adv Mater
	Volume	26	Issue	13	Pages	2034-2040
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Strong granularity-correlated and intragrain modulations of the superconducting order parameter are demonstrated in heavily boron-doped diamond situated not yet in the vicinity of the metal-insulator transition. These modulations at the superconducting state (SC) and at the global normal state (NS) above the resistive superconducting transition, reveal that local Cooper pairing sets in prior to the global phase coherence.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Weinheim	Editor
	Language		Wos	000333616700008	Publication Date	2013-12-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0935-9648;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	19.791	Times cited	34	Open Access
	Notes	Methusalem Funding; FWO projects; MP1201 COST Action; ERC Grant N246791-COUNTATOMS; post-doctoral grant (S.T.) and for project no. G.0568.10N.;Hercules Foundation			Approved	Most recent IF: 19.791; 2014 IF: 17.493
	Call Number	UA @ lucian @ c:irua:116150			Serial	1346
Permanent link to this record



	Author	Rehor, I.; Mackova, H.; Filippov, S.K.; Kucka, J.; Proks, V.; Slegerova, J.; Turner, S.; Van Tendeloo, G.; Ledvina, M.; Hruby, M.; Cigler, P.;
	Title	Fluorescent nanodiamonds with bioorthogonally reactive protein-resistant polymeric coatings			Type	A1 Journal article
	Year	2014	Publication	ChemPlusChem	Abbreviated Journal	Chempluschem
	Volume	79	Issue	1	Pages	21-24
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The novel synthesis of a polymeric interface grown from the surface of bright fluorescent nanodiamonds is reported. The polymer enables bioorthogonal attachment of various molecules by click chemistry; the particles are resistant to nonspecific protein adsorption and show outstanding colloidal stability in buffers and biological media. The coating fully preserves the unique optical properties of the nitrogen-vacancy centers that are crucial for bioimaging and sensoric applications.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000337974900002	Publication Date	2013-12-11
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2192-6506;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.797	Times cited	34	Open Access
	Notes	EU 7FP Program (no.262348); European Soft Matter Infrastructure; ESMI; ERC (grant no.246791)-COUNTATOMS; FWO			Approved	Most recent IF: 2.797; 2014 IF: 2.997
	Call Number	UA @ lucian @ c:irua:113088			Serial	1235
Permanent link to this record



	Author	Kundu, P.; Turner, S.; Van Aert, S.; Ravishankar, N.; Van Tendeloo, G.
	Title	Atomic structure of quantum gold nanowires : quantification of the lattice strain			Type	A1 Journal article
	Year	2014	Publication	ACS nano	Abbreviated Journal	Acs Nano
	Volume	8	Issue	1	Pages	599-606
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Theoretical studies exist to compute the atomic arrangement in gold nanowires and the influence on their electronic behavior with decreasing diameter. Experimental studies, e.g., by transmission electron microscopy, on chemically synthesized ultrafine wires are however lacking owing to the unavailability of suitable protocols for sample preparation and the stability of the wires under electron beam irradiation. In this work, we present an atomic scale structural investigation on quantum single crystalline gold nanowires of 2 nm diameter, chemically prepared on a carbon film grid. Using low dose aberration-corrected high resolution (S)TEM, we observe an inhomogeneous strain distribution in the crystal, largely concentrated at the twin boundaries and the surface along with the presence of facets and surface steps leading to a noncircular cross section of the wires. These structural aspects are critical inputs needed to determine their unique electronic character and their potential as a suitable catalyst material. Furthermore, electron-beam-induced structural changes at the atomic scale, having implications on their mechanical behavior and their suitability as interconnects, are discussed.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000330542900061	Publication Date	2013-11-29
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1936-0851;1936-086X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	13.942	Times cited	20	Open Access
	Notes	FWO; Countatoms; Hercules			Approved	Most recent IF: 13.942; 2014 IF: 12.881
	Call Number	UA @ lucian @ c:irua:113856			Serial	199
Permanent link to this record



	Author	Geukens, I.; Vermoortele, F.; Meledina, M.; Turner, S.; Van Tendeloo, G.; De Vos, D.E.
	Title	Ag nanoparticles on mixed Al₂O₃-Ga₂O₃ supports as catalysts for the N-alkylation of amines with alcohols			Type	A1 Journal article
	Year	2014	Publication	Applied catalysis : A : general	Abbreviated Journal	Appl Catal A-Gen
	Volume	469	Issue		Pages	373-379
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The combination of AgNO3 with NaH results in Ag nanoparticles that can selectively perform alcohol aminations under mild reaction conditions (110 °C). NaH not only serves as a reducing agent for the Ag salt, but also activates the alcohol for dehydrogenation to the corresponding ketone/aldehyde. The stability of the particles can be improved by immobilizing them onto mixed Al2O3Ga2O3 supports; the combination of Ga and Al provides materials with stronger Lewis acidic sites compared to pure alumina or gallium oxide supports. This leads to catalysts with enhanced activities, without the necessity of adding external Lewis acids. Detailed TEM characterization also reveals a close interaction between the Ag NPs and the gallium oxide phase. The obtained catalysts are recyclable and show activity for the alcohol amination using a variety of aliphatic and aromatic amines under mild conditions.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000329266500045	Publication Date	2013-10-10
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0926-860X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.339	Times cited	24	Open Access
	Notes				Approved	Most recent IF: 4.339; 2014 IF: 3.942
	Call Number	UA @ lucian @ c:irua:111095			Serial	83
Permanent link to this record



	Author	Carraro, G.; Maccato, C.; Gasparotto, A.; Montini, T.; Turner, S.; Lebedev, O.I.; Gombac, V.; Adami, G.; Van Tendeloo, G.; Barreca, D.; Fornasiero, P.;
	Title	Enhanced hydrogen production by photoreforming of renewable oxygenates through nanostructured Fe₂O₃ polymorphs			Type	A1 Journal article
	Year	2014	Publication	Advanced functional materials	Abbreviated Journal	Adv Funct Mater
	Volume	24	Issue	3	Pages	372-378
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Sunlight-driven hydrogen production via photoreforming of aqueous solutions containing renewable compounds is an attractive option for sustainable energy generation with reduced carbon footprint. Nevertheless, the absence of photocatalysts combining high efficiency and stability upon solar light activation has up to date strongly hindered the development of this technology. Herein, two scarcely investigated iron(III) oxide polymorphs, β- and ε-Fe2O3, possessing a remarkable activity in sunlight-activated H2 generation from aqueous solutions of renewable oxygenates (i.e., ethanol, glycerol, glucose) are reported. For β-Fe2O3 and ε-Fe2O3, H2 production rates up to 225 and 125 mmol h−1 m−2 are obtained, with significantly superior performances with respect to the commonly investigated α-Fe2O3.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Weinheim	Editor
	Language		Wos	000332832500011	Publication Date	2013-10-08
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1616-301X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	12.124	Times cited	95	Open Access
	Notes	Countatoms; Hercules; Fwo			Approved	Most recent IF: 12.124; 2014 IF: 11.805
	Call Number	UA @ lucian @ c:irua:113090			Serial	1051
Permanent link to this record



	Author	Wu, S.; Luo, X.; Turner, S.; Peng, H.; Lin, W.; Ding, J.; David, A.; Wang, B.; Van Tendeloo, G.; Wang, J.; Wu, T.;
	Title	Nonvolatile resistive switching in Pt/LaAlO₃/SrTiO₃ heterostructures			Type	A1 Journal article
	Year	2013	Publication	Physical review X	Abbreviated Journal	Phys Rev X
	Volume	3	Issue	4	Pages	041027-14
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Resistive switching heterojunctions, which are promising for nonvolatile memory applications, usually share a capacitorlike metal-oxide-metal configuration. Here, we report on the nonvolatile resistive switching in Pt/LaAlO3/SrTiO3 heterostructures, where the conducting layer near the LaAlO3/SrTiO3 interface serves as the unconventional bottom electrode although both oxides are band insulators. Interestingly, the switching between low-resistance and high-resistance states is accompanied by reversible transitions between tunneling and Ohmic characteristics in the current transport perpendicular to the planes of the heterojunctions. We propose that the observed resistive switching is likely caused by the electric-field-induced drift of charged oxygen vacancies across the LaAlO3/SrTiO3 interface and the creation of defect-induced gap states within the ultrathin LaAlO3 layer. These metal-oxide-oxide heterojunctions with atomically smooth interfaces and defect-controlled transport provide a platform for the development of nonvolatile oxide nanoelectronics that integrate logic and memory devices.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	College Park, Md	Editor
	Language		Wos	000328862400001	Publication Date	2013-12-17
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2160-3308;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	12.789	Times cited	77	Open Access
	Notes	FWO;FP7;IFOX; Countatoms; Hercules			Approved	Most recent IF: 12.789; 2013 IF: 8.463
	Call Number	UA @ lucian @ c:irua:112524			Serial	2365
Permanent link to this record



	Author	Bogomolova, A.; Hruby, M.; Panek, J.; Rabyk, M.; Turner, S.; Bals, S.; Steinhart, M.; Zhigunov, A.; Sedlacek, O.; Stepanek, P.; Filippov, S.K.;
	Title	Small-angle X-ray scattering and light scattering study of hybrid nanoparticles composed of thermoresponsive triblock copolymer F127 and thermoresponsive statistical polyoxazolines with hydrophobic moieties			Type	A1 Journal article
	Year	2013	Publication	Journal of applied crystallography	Abbreviated Journal	J Appl Crystallogr
	Volume	46	Issue	6	Pages	1690-1698
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	A combination of new thermoresponsive statistical polyoxazolines, poly[(2-butyl-2-oxazoline)-stat-(2-isopropyl-2-oxazoline)] [pBuOx-co-piPrOx], with different hydrophobic moieties and F127 surfactant as a template system for the creation of thermosensitive nanoparticles for radionuclide delivery has recently been tested [Pánek, Filippov, Hrubý, Rabyk, Bogomolova, Kučka Stěpánek (2012). Macromol. Rapid Commun.33, 16831689]. It was shown that the presence of the thermosensitive F127 triblock copolymer in solution reduces nanoparticle size and polydispersity. This article focuses on a determination of the internal structure and solution properties of the nanoparticles in the temperature range from 288 to 312 K. Here, it is demonstrated that below the cloud point temperature (CPT) the polyoxazolines and F127 form complexes that co-exist in solution with single F127 molecules and large aggregates. When the temperature is raised above the CPT, nanoparticles composed of polyoxazolines and F127 are predominant in solution. These nanoparticles could be described by a spherical shell model. It was found that the molar weight and hydrophobicity of the polymer do not influence the size of the outer radius and only slightly change the inner radius of the nanoparticles. At the same time, molar weight and hydrophobicity did affect the process of nanoparticle formation. In conclusion, poly(2-oxazoline) molecules are fully incorporated inside of F127 micelles, and this result is very promising for the successful application of such systems in radionuclide delivery.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Copenhagen	Editor
	Language		Wos	000327070000020	Publication Date	2013-11-06
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0021-8898;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	18	Open Access
	Notes	262348 Esmi; Fwo; Iap-Pai			Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:112420			Serial	3042
Permanent link to this record



	Author	Mei, B.; Wiktor, C.; Turner, S.; Pougin, A.; Van Tendeloo, G.; Fischer, R.A.; Muhler, M.; Strunk, J.
	Title	Evidence for metalsupport interactions in Au modified TiO_x/SBA-15 materials prepared by photodeposition			Type	A1 Journal article
	Year	2013	Publication	ACS catalysis	Abbreviated Journal	Acs Catal
	Volume	3	Issue	12	Pages	3041-3049
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Gold nanoparticles have been efficiently photodeposited onto titanate-loaded SBA-15 (Ti(x)/SBA-15) with different titania coordination. Transmission electron microscopy shows that relatively large Au nanoparticles are photodeposited on the outer surface of the Ti(x)/SBA-15 materials and that TiOx tends to form agglomerates in close proximity to the Au nanoparticles, often forming coreshell Au/TiOx structures. This behavior resembles typical processes observed due to strong-metal support interactions. In the presence of gold, the formation of hydrogen on Ti(x)/SBA-15 during the photodeposition process and the performance in the hydroxylation of terephthalic acid is greatly enhanced. The activity of the Au/Ti(x)/SBA-15 materials is found to depend on the TiOx loading, increasing with a larger amount of initially isolated TiO4 tetrahedra. Samples with initially clustered TiOx species show lower photocatalytic activities. When isolated zinc oxide (ZnOx) species are present on Ti(x)/SBA-15, gold nanoparticles are smaller and well dispersed within the pores. Agglomeration of TiOx species and the formation of Au/TiOx structures is negligible. The dispersion of gold and the formation of Au/TiOx in the SBA-15 matrix seem to depend on the mobility of the TiOx species. The mobility is determined by the initial degree of agglomeration of TiOx. Effective hydrogen evolution requires Au/TiOx coreshell composites as in Au/Ti(x)/SBA-15, whereas hydroxylation of terephthalic acid can also be performed with Au/ZnOx/TiOx/SBA-15 materials. However, isolated TiOx species have to be grafted onto the support prior to the zinc oxide species, providing strong evidence for the necessity of TiOSi bridges for high photocatalytic activity in terephthalic acid hydroxylation.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000328231400044	Publication Date	2013-11-05
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2155-5435;2155-5435;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	10.614	Times cited	22	Open Access
	Notes	262348 ESMI; FWO; 246791 COUNTATOMS; IAP-PAI; Hercules			Approved	Most recent IF: 10.614; 2013 IF: 7.572
	Call Number	UA @ lucian @ c:irua:112502			Serial	1094
Permanent link to this record



	Author	Turner, S.; Shenderova, O.; da Pieve, F.; Lu, Y.-G.; Yücelen, E.; Verbeeck, J.; Lamoen, D.; Van Tendeloo, G.
	Title	Aberration-corrected microscopy and spectroscopy analysis of pristine, nitrogen containing detonation nanodiamond			Type	A1 Journal article
	Year	2013	Publication	Physica status solidi : A : applications and materials science	Abbreviated Journal	Phys Status Solidi A
	Volume	210	Issue	10	Pages	1976-1984
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Aberration-corrected transmission electron microscopy, electron energy-loss spectroscopy, and density functional theory (DFT) calculations are used to solve several key questions about the surface structure, the particle morphology, and the distribution and nature of nitrogen impurities in detonation nanodiamond (DND) cleaned by a recently developed ozone treatment. All microscopy and spectroscopy measurements are performed at a lowered acceleration voltage (80/120kV), allowing prolonged and detailed experiments to be carried out while minimizing the risk of knock-on damage or surface graphitization of the nanodiamond. High-resolution TEM (HRTEM) demonstrates the stability of even the smallest nanodiamonds under electron illumination at low voltage and is used to image the surface structure of pristine DND. High resolution electron energy-loss spectroscopy (EELS) measurements on the fine structure of the carbon K-edge of nanodiamond demonstrate that the typical * pre-peak in fact consists of three sub-peaks that arise from the presence of, amongst others, minimal fullerene-like reconstructions at the nanoparticle surfaces and deviations from perfect sp(3) coordination at defects in the nanodiamonds. Spatially resolved EELS experiments evidence the presence of nitrogen within the core of DND particles. The nitrogen is present throughout the whole diamond core, and can be enriched at defect regions. By comparing the fine structure of the experimental nitrogen K-edge with calculated energy-loss near-edge structure (ELNES) spectra from DFT, the embedded nitrogen is most likely related to small amounts of single substitutional and/or A-center nitrogen, combined with larger nitrogen clusters.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000329299700025	Publication Date	2013-10-18
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1862-6300;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.775	Times cited	37	Open Access
	Notes	262348 ESMI; 246791 COUNTATOMS; FWO; Hercules; GOA XANES meets ELNES			Approved	Most recent IF: 1.775; 2013 IF: 1.525
	Call Number	UA @ lucian @ c:irua:110821UA @ admin @ c:irua:110821			Serial	41
Permanent link to this record