NANOlab Center of Excellence literature database -- Query Results

	NANOlab Center of Excellence literature database Home \| Show All \| Simple Search \| Advanced Search	Login Quick Search: Field: contains: ...
	61–79 of 79 records found matching your query (RSS):

Select All Deselect All

<< 1 2 3 >>

List View

Citations

Details

	Records
	Author	Idrissi, H.; Renard, K.; Schryvers, D.; Jacques, P.J.
	Title	TEM investigation of the formation mechanism of deformation twins in Fe-Mn-Si-Al TWIP steels			Type	A1 Journal article
	Year	2013	Publication	Philosophical magazine	Abbreviated Journal	Philos Mag
	Volume	93	Issue	35	Pages	4378-4391
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The microstructure of a Fe-Mn-Si-Al twinning-induced plasticity (TWIP) steel exhibiting remarkable work hardening rate under uniaxial tensile deformation was investigated using transmission electron microscopy to uncover the mechanism(s) controlling the nucleation and growth of the mechanically induced twins. The results show that the stair-rod cross-slip deviation mechanism is necessary for the formation of the twins, while large extrinsic stacking faults homogenously distributed within the grains could act as preferential sources for the activation of the deviation process. The influence of such features on the thickness and strength of the twins and the resulting mechanical behaviour is discussed and compared to similar works recently performed on Fe-Mn-C TWIP steels.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000327478300005	Publication Date	2013-09-12
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1478-6435;1478-6443;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.505	Times cited	15	Open Access
	Notes				Approved	Most recent IF: 1.505; 2013 IF: 1.427
	Call Number	UA @ lucian @ c:irua:112815			Serial	3478
Permanent link to this record



	Author	Amin-Ahmadi, B.; Idrissi, H.; Galceran, M.; Colla, M.S.; Raskin, J.P.; Pardoen, T.; Godet, S.; Schryvers, D.
	Title	Effect of deposition rate on the microstructure of electron beam evaporated nanocrystalline palladium thin films			Type	A1 Journal article
	Year	2013	Publication	Thin solid films : an international journal on the science and technology of thin and thick films	Abbreviated Journal	Thin Solid Films
	Volume	539	Issue		Pages	145-150
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The influence of the deposition rate on the formation of growth twins in nanocrystalline Pd films deposited by electron beam evaporation is investigated using transmission electron microscopy. Statistical measurements prove that twin boundary (TB) density and volume fraction of grains containing twins increase with increasing deposition rate. A clear increase of the dislocation density was observed for the highest deposition rate of 5 Å/s, caused by the increase of the internal stress building up during deposition. Based on crystallographic orientation indexation using transmission electron microscopy, it can be concluded that a {111} crystallographic texture increases with increasing deposition rate even though the {101} crystallographic texture remains dominant. Most of the TBs are fully coherent without any residual dislocations. However, for the highest deposition rate (5 Å/s), the coherency of the TBs decreases significantly as a result of the interaction of lattice dislocations emitted during deposition with the growth TBs. The analysis of the grain boundary character of different Pd films shows that an increasing fraction of high angle grain boundaries with misorientation angles around 5565° leads to a higher potential for twin formation.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lausanne	Editor
	Language		Wos	000321111100025	Publication Date	2013-05-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0040-6090;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.879	Times cited	13	Open Access
	Notes	Fwo			Approved	Most recent IF: 1.879; 2013 IF: 1.867
	Call Number	UA @ lucian @ c:irua:109268			Serial	807
Permanent link to this record



	Author	Schryvers, D.; Cao, S.; Tirry, W.; Idrissi, H.; Van Aert, S.
	Title	Advanced three-dimensional electron microscopy techniques in the quest for better structural and functional materials			Type	A1 Journal article
	Year	2013	Publication	Science and technology of advanced materials	Abbreviated Journal	Sci Technol Adv Mat
	Volume	14	Issue	1	Pages	014206-14213
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	After a short review of electron tomography techniques for materials science, this overview will cover some recent results on different shape memory and nanostructured metallic systems obtained by various three-dimensional (3D) electron imaging techniques. In binary NiTi, the 3D morphology and distribution of Ni4Ti3 precipitates are investigated by using FIB/SEM slice-and-view yielding 3D data stacks. Different quantification techniques will be presented including the principal ellipsoid for a given precipitate, shape classification following a Zingg scheme, particle distribution function, distance transform and water penetration. The latter is a novel approach to quantifying the expected matrix transformation in between the precipitates. The different samples investigated include a single crystal annealed with and without compression yielding layered and autocatalytic precipitation, respectively, and a polycrystal revealing different densities and sizes of the precipitates resulting in a multistage transformation process. Electron tomography was used to understand the interaction between focused ion beam-induced Frank loops and long dislocation structures in nanobeams of Al exhibiting special mechanical behaviour measured by on-chip deposition. Atomic resolution electron tomography is demonstrated on Ag nanoparticles in an Al matrix.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Sendai	Editor
	Language		Wos	000316463800008	Publication Date	2013-03-13
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1468-6996;1878-5514;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.798	Times cited	6	Open Access
	Notes	Fwo; Iap; Esteem			Approved	Most recent IF: 3.798; 2013 IF: 2.613
	Call Number	UA @ lucian @ c:irua:107343			Serial	77
Permanent link to this record



	Author	Amin-Ahmadi, B.; Idrissi, H.; Delmelle, R.; Pardoen, T.; Proost, J.; Schryvers, D.
	Title	High resolution transmission electron microscopy characterization of fcc -> 9R transformation in nanocrystalline palladium films due to hydriding			Type	A1 Journal article
	Year	2013	Publication	Applied physics letters	Abbreviated Journal	Appl Phys Lett
	Volume	102	Issue	7	Pages	071911-71914
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Sputtered nanocrystalline palladium thin films with nanoscale growth twins have been subjected to hydriding cycles. The evolution of the twin boundaries has been investigated using high resolution transmission electron microscopy. Surprisingly, the Sigma 3{112} incoherent twin boundaries dissociate after hydriding into two phase boundaries bounding a 9R phase. This phase which corresponds to single stacking faults located every three {111} planes in the fcc Pd structure was not expected because of the high stacking fault energy of Pd. This observation is connected to the influence of the Hydrogen on the stacking fault energy of palladium and the high compressive stresses building up during hydriding. (C) 2013 American Institute of Physics. [http://dx.doi.org/10.1063/1.4793512]
	Address
	Corporate Author				Thesis
	Publisher	American Institute of Physics	Place of Publication	New York, N.Y.	Editor
	Language		Wos	000315596700023	Publication Date	2013-02-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0003-6951;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.411	Times cited	14	Open Access
	Notes	Iap			Approved	Most recent IF: 3.411; 2013 IF: 3.515
	Call Number	UA @ lucian @ c:irua:108303			Serial	1462
Permanent link to this record



	Author	Schryvers, D.; Van Aert, S.; Delville, R.; Idrissi, H.; Turner, S.; Salje, E.K.H.
	Title	Dedicated TEM on domain boundaries from phase transformations and crystal growth			Type	A1 Journal article
	Year	2013	Publication	Phase transitions	Abbreviated Journal	Phase Transit
	Volume	86	Issue	1	Pages	15-22
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Investigating domain boundaries and their effects on the behaviour of materials automatically implies the need for detailed knowledge on the structural aspects of the atomic configurations at these interfaces. Not only in view of nearest neighbour interactions but also at a larger scale, often surpassing the unit cell, the boundaries can contain structural elements that do not exist in the bulk. In the present contribution, a number of special boundaries resulting from phase transformations or crystal growth and those recently investigated by advanced transmission electron microscopy techniques in different systems will be reviewed. These include macrotwins between microtwinned martensite plates in NiAl, austenite-single variant martensite habit planes in low hysteresis NiTiPd, nanotwins in non-textured nanostructured Pd and ferroelastic domain boundaries in CaTiO3. In all discussed cases these boundaries play an essential role in the properties of the respective materials.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York	Editor
	Language		Wos	000312586700003	Publication Date	2012-12-19
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0141-1594;1029-0338;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.06	Times cited		Open Access
	Notes	Fwo; Iap			Approved	Most recent IF: 1.06; 2013 IF: 1.044
	Call Number	UA @ lucian @ c:irua:101222			Serial	612
Permanent link to this record



	Author	Wang, B.; Idrissi, H.; Galceran, M.; Colla, M.S.; Turner, S.; Hui, S.; Raskin, J.P.; Pardoen, T.; Godet, S.; Schryvers, D.
	Title	Advanced TEM investigation of the plasticity mechanisms in nanocrystalline freestanding palladium films with nanoscale twins			Type	A1 Journal article
	Year	2012	Publication	International journal of plasticity	Abbreviated Journal	Int J Plasticity
	Volume	37	Issue		Pages	140-156
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Nanocrystalline palladium thin films deposited by electron-beam evaporation and deformed by on-chip tensile testing reveal a surprisingly large strain hardening capacity when considering the small similar to 25 nm grain size. The as-grown films contain several coherent single and multifold twin boundaries. The coherency of the twin boundaries considerably decreases with deformation due to dislocation/twin boundary interactions. These reactions are described based on a detailed analysis of the number and the type of dislocations located at the twin boundaries using high-resolution TEM, including aberration corrected microscopy. Sessile Frank dislocations were observed at the twin/matrix interfaces, explaining the loss of the TB coherency due to the Burgers vector pointing out of the twinning plane. Grain boundary mediated processes were excluded as a mechanism dominating the plastic deformation based on the investigation of the grain size distribution as well as the crystallographic texture using Automated Crystallographic Orientation Indexation TEM. Other factors influencing the plastic deformation such as impurities and the presence of a native passivation oxide layer at the surface of the films were investigated using analytical TEM. The twin boundaries observed in the present work partly explain the high strain hardening capacity by providing both increasing resistance to dislocation motion with deformation and a source for dislocation multiplication. (C) 2012 Elsevier Ltd. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000307416100009	Publication Date	2012-05-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0749-6419;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	5.702	Times cited	44	Open Access
	Notes	Iap; Fwo			Approved	Most recent IF: 5.702; 2012 IF: 4.356
	Call Number	UA @ lucian @ c:irua:101082			Serial	74
Permanent link to this record



	Author	Renard, K.; Idrissi, H.; Schryvers, D.; Jacques, P.J.
	Title	Multiscale characterization of the work hardening mechanisms in Fe-Mn based TWIP steels			Type	A1 Journal article
	Year	2012	Publication	Steel research international	Abbreviated Journal	Steel Res Int
	Volume	83	Issue	4	Pages	385-390
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	When strained in tension, high-manganese austenitic twinning induced plasticity (TWIP) steels achieve very high strength and elongation before necking. The main hypotheses available in the literature about the origin of their excellent work hardening include deformation twinning and dynamic strain ageing. In order to provide some answers, various experiments at different scales were conducted on FeMnC steels and the Fe28 wt%Mn3.5 wt%Al2.8 wt%Si alloy. At a macroscopic scale, tensile tests were performed on all the studied grades. It was shown that, though the FeMnAlSi based alloy retains very high elongation, the FeMnC steels properties are even more extraordinary. Tensile tests at different strain rates with the help of digital image correlation were also performed on the Fe20 wt%Mn1.2 wt%C steel to study the PLC effect occurring in this type of steel. It is suggested that supplementary hardening could come from reorientation of MnC pairs in the cores of the dislocations. At a microscopic scale, the Fe20 wt%Mn1.2 wt%C TWIP steel and the FeMnAlSi grade were thoroughly investigated by means of in situ TEM analysis. In the FeMnC steel, the formed twins could also lead to a composite effect, since they contain plenty of sessile dislocations. In the FeMnAlSi alloy, mechanical twins are thicker and contain fewer defects, leading to a lower work hardening than the other grade.
	Address
	Corporate Author				Thesis
	Publisher	Verlag Stahleisen	Place of Publication	Düsseldorf	Editor
	Language		Wos	000302471600016	Publication Date	2012-02-22
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1611-3683;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.235	Times cited	12	Open Access
	Notes				Approved	Most recent IF: 1.235; 2012 IF: 0.493
	Call Number	UA @ lucian @ c:irua:97391			Serial	2239
Permanent link to this record



	Author	Renard, K.; Idrissi, H.; Schryvers, D.; Jacques, P.J.
	Title	On the stress state dependence of the twinning rate and work hardening in twinning-induced plasticity steels			Type	A1 Journal article
	Year	2012	Publication	Scripta materialia	Abbreviated Journal	Scripta Mater
	Volume	66	Issue	12	Pages	966-971
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The influence of the stress state on the twinning rate and work hardening is studied in the case of an FeMnC TWIP steel strained in uniaxial tension, simple shear and rolling. The resulting stressstrain responses exhibit marked differences. The twinning rate, number of activated twinning systems in each grain, twin thickness and transmission of twins across grain boundaries are dependent on the imposed stress state during straining. Relationships between twin features and macroscopic work hardening rate are established.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000304641500004	Publication Date	2012-02-10
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-6462;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.747	Times cited	41	Open Access
	Notes	Iap			Approved	Most recent IF: 3.747; 2012 IF: 2.821
	Call Number	UA @ lucian @ c:irua:98374			Serial	2454
Permanent link to this record



	Author	Colla, M.-S.; Wang, B.; Idrissi, H.; Schryvers, D.; Raskin, J.-P.; Pardoen, T.
	Title	High strength-ductility of thin nanocrystalline palladium films with nanoscale twins : on-chip testing and grain aggregate model			Type	A1 Journal article
	Year	2012	Publication	Acta materialia	Abbreviated Journal	Acta Mater
	Volume	60	Issue	4	Pages	1795-1806
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	The mechanical behaviour of thin nanocrystalline palladium films with an ∼30 nm in plane grain size has been characterized on chip under uniaxial tension. The films exhibit a large strain hardening capacity and a significant increase in the strength with decreasing thickness. Transmission electron microscopy has revealed the presence of a moderate density of growth nanotwins interacting with dislocations. A semi-analytical grain aggregate model is proposed to investigate the impact of different contributions to the flow behaviour, involving the effect of twins, of grain size and of the presence of a thin surface layer. This model provides guidelines to optimizing the strength/ductility ratio of the films.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000301989500035	Publication Date	2012-02-02
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-6454;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	5.301	Times cited	38	Open Access
	Notes	Iap			Approved	Most recent IF: 5.301; 2012 IF: 3.941
	Call Number	UA @ lucian @ c:irua:94213			Serial	1465
Permanent link to this record



	Author	Wang, B.; Idrissi, H.; Shi, H.; Colla, M.S.; Michotte, S.; Raskin, J.P.; Pardoen, T.; Schryvers, D.
	Title	Texture-dependent twin formation in nanocrystalline thin Pd films			Type	A1 Journal article
	Year	2012	Publication	Scripta materialia	Abbreviated Journal	Scripta Mater
	Volume	66	Issue	11	Pages	866-871
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Nanocrystalline Pd films were produced by electron-beam evaporation and sputter deposition. The electron-beam-evaporated films reveal randomly oriented nanograins with a relatively high density of growth twins, unexpected in view of the high stacking fault energy of Pd. In contrast, sputter-deposited films show a clear 〈1 1 1〉 crystallographic textured nanostructure without twins. These results provide insightful information to guide the generation of microstructures with enhanced strength/ductility balance in high stacking fault energy nanocrystalline metallic thin films.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000303621900007	Publication Date	2012-01-31
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-6462;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.747	Times cited	19	Open Access
	Notes	Iap; Fwo			Approved	Most recent IF: 3.747; 2012 IF: 2.821
	Call Number	UA @ lucian @ c:irua:96955			Serial	3566
Permanent link to this record



	Author	Idrissi, H.; Schryvers, D.
	Title	Investigation of the elementary mechanisms controlling dislocation/twin boundary interactions in fcc metals and alloys : from conventional to advanced TEM characterization			Type	H2 Book chapter
	Year	2012	Publication		Abbreviated Journal
	Volume		Issue		Pages	1213-1224
	Keywords	H2 Book chapter; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher	Formatex Research Center	Place of Publication	S.l.	Editor
	Language		Wos		Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN	978-84-939843-6-6	Additional Links	UA library record
	Impact Factor		Times cited		Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:104694			Serial	1737
Permanent link to this record



	Author	Idrissi, H.; Turner, S.; Mitsuhara, M.; Wang, B.; Hata, S.; Coulombier, M.; Raskin, J.-P.; Pardoen, T.; Van Tendeloo, G.; Schryvers, D.
	Title	Point defect clusters and dislocations in FIB irradiated nanocrystalline aluminum films : an electron tomography and aberration-corrected high-resolution ADF-STEM study			Type	A1 Journal article
	Year	2011	Publication	Microscopy and microanalysis	Abbreviated Journal	Microsc Microanal
	Volume	17	Issue	6	Pages	983-990
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Focused ion beam (FIB) induced damage in nanocrystalline Al thin films has been characterized using advanced transmission electron microscopy techniques. Electron tomography was used to analyze the three-dimensional distribution of point defect clusters induced by FIB milling, as well as their interaction with preexisting dislocations generated by internal stresses in the Al films. The atomic structure of interstitial Frank loops induced by irradiation, as well as the core structure of Frank dislocations, has been resolved with aberration-corrected high-resolution annular dark-field scanning TEM. The combination of both techniques constitutes a powerful tool for the study of the intrinsic structural properties of point defect clusters as well as the interaction of these defects with preexisting or deformation dislocations in irradiated bulk or nanostructured materials.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Cambridge, Mass.	Editor
	Language		Wos	000297832300018	Publication Date	2011-10-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1431-9276;1435-8115;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.891	Times cited	25	Open Access
	Notes	Iap; Fwo			Approved	Most recent IF: 1.891; 2011 IF: 3.007
	Call Number	UA @ lucian @ c:irua:93627			Serial	2653
Permanent link to this record



	Author	Idrissi, H.; Wang, B.; Colla, M.S.; Raskin, J.P.; Schryvers, D.; Pardoen, T.
	Title	Ultrahigh strain hardening in thin palladium films with nanoscale twins			Type	A1 Journal article
	Year	2011	Publication	Advanced materials	Abbreviated Journal	Adv Mater
	Volume	23	Issue	18	Pages	2119-2122
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Nanocrystalline Pd thin films containing coherent growth twin boundaries are deformed using on-chip nanomechanical testing. A large work-hardening capacity is measured. The origin of the observed behavior is unraveled using transmission electron microscopy and shows specific dislocations and twin boundaries interactions. The results indicate the potential for large strength and ductility balance enhancement in Pd films, as needed in membranes for H technologies.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Weinheim	Editor
	Language		Wos	000291164200013	Publication Date	2011-04-04
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0935-9648;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	19.791	Times cited	57	Open Access
	Notes	Iap			Approved	Most recent IF: 19.791; 2011 IF: 13.877
	Call Number	UA @ lucian @ c:irua:90103			Serial	3794
Permanent link to this record



	Author	Idrissi, H.; Renard, K.; Schryvers, D.; Jacques, P.J.
	Title	On the relationship between the twin internal structure and the work-hardening rate of TWIP steels			Type	A1 Journal article
	Year	2010	Publication	Scripta materialia	Abbreviated Journal	Scripta Mater
	Volume	63	Issue	10	Pages	961-964
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	FeMnC and FeMnSiAl TWIP steels deformed under the same conditions exhibit different work-hardening rates. The present study investigates the microstructure of plastically deformed FeMnC and FeMnSiAl samples, particularly the internal structure of the mechanically generated twins and their topology at the grain scale. Twins in the FeMnC steel are finer and full of sessile dislocations, rendering this material distinctly stronger with an improved work-hardening rate.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000282461800003	Publication Date	2010-07-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-6462;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.747	Times cited	145	Open Access
	Notes	Iap			Approved	Most recent IF: 3.747; 2010 IF: 2.820
	Call Number	UA @ lucian @ c:irua:84472			Serial	2452
Permanent link to this record



	Author	Idrissi, H.; Renard, K.; Ryelandt, L.; Schryvers, D.; Jacques, P.J.
	Title	On the mechanism of twin formation in FeMnC TWIP steels			Type	A1 Journal article
	Year	2010	Publication	Acta materialia	Abbreviated Journal	Acta Mater
	Volume	58	Issue	7	Pages	2464-2476
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Although it is well known that FeMnC TWIP steels exhibit high work-hardening rates, the elementary twinning mechanisms controlling the plastic deformation of these steels have still not been characterized. The aim of the present study is to analyse the extended defects related to the twinning occurrence using transmission electron microscopy. Based on these observations, the very early stage of twin nucleation can be attributed to the pole mechanism with deviation proposed by Cohen and Weertman or to the model of Miura, Takamura and Narita, while the twin growth is controlled by the pole mechanism proposed by Venables. High densities of sessile Frank dislocations are observed within the twins at the early stage of deformation, which can affect the growth and the stability of the twins, but also the strength of these twins and their interactions with the gliding dislocations present in the matrix. This experimental evidence is discussed and compared to recent results in order to relate the defects analysis to the macroscopic behaviour of this category of material.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000276523200018	Publication Date	2010-01-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-6454;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	5.301	Times cited	244	Open Access
	Notes	Iap			Approved	Most recent IF: 5.301; 2010 IF: 3.791
	Call Number	UA @ lucian @ c:irua:82270			Serial	2441
Permanent link to this record



	Author	Salje, E.K.H.; Zhang, H.; Idrissi, H.; Schryvers, D.; Carpenter, M.A.; Moya, X.; Planes, A.
	Title	Mechanical resonance of the austenite/martensite interface and the pinning of the martensitic microstructures by dislocations in Cu_74.08Al_23.13Be_2.79			Type	A1 Journal article
	Year	2009	Publication	Physical review: B: condensed matter and materials physics	Abbreviated Journal	Phys Rev B
	Volume	80	Issue	13	Pages	134114,1-1134114,8
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	A single crystal of Cu74.08Al23.13Be2.79 undergoes a martensitic phase transition at 246 and 232 K under heating and cooling, respectively. The phase fronts between the austenite and martensite regions of the sample are weakly mobile with a power-law resonance under external stress fields. Surprisingly, the martensite phase is elastically much harder than the austenite phase showing that interfaces between various crystallographic variants are strongly pinned and cannot be moved by external stress while the phase boundary between the austenite and martensite regions in the sample remains mobile. This unusual behavior was studied by dynamical mechanical analysis (DMA) and resonant ultrasound spectroscopy. The remnant strain, storage modulus, and internal friction were recorded simultaneously for different applied forces in DMA. With increasing forces, the remnant strain increases monotonously while the internal friction peak height shows a minimum at 300 mN. Transmission electron microscopy shows that the pinning is generated by dislocations which are inherited from the austenite phase.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lancaster, Pa	Editor
	Language		Wos	000271351300033	Publication Date	2009-10-22
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1098-0121;1550-235X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.836	Times cited	38	Open Access
	Notes	Multimat			Approved	Most recent IF: 3.836; 2009 IF: 3.475
	Call Number	UA @ lucian @ c:irua:78542			Serial	1975
Permanent link to this record



	Author	Idrissi, H.; Schryvers, D.; Salje, E.K.H.; Zhang, H.; Carpenter, M.A.; Moya, X.
	Title	Pinning of the martensitic microstructures by dislocations in Cu_74.08Al_23.13Be_2.79			Type	P1 Proceeding
	Year	2009	Publication		Abbreviated Journal
	Volume		Issue		Pages	02029,1-02029,5
	Keywords	P1 Proceeding; Electron microscopy for materials research (EMAT)
	Abstract	A single crystal of Cu74.08Al23.13Be2.79 undergoes a martensitic phase transition at 246K and 232K under heating and cooling, respectively. Surprisingly, the martensite phase is elastically much harder than the austenite phase showing that interfaces between various crystallographic variants are strongly pinned and can not be moved by external stress while the phase boundary between the austenite and martensite regions in the sample remains mobile. This unusual behavior was revealed by Dynamical Mechanical Analysis and Resonant Ultrasound Spectroscopy. Transmission Electron Microscopy shows that the pinning is generated by dislocations, which are inherited from the austenite phase. Such dislocations can hinder the movement of stacking faults in the 18R martensite structure or twin boundaries between martensite variants.
	Address
	Corporate Author				Thesis
	Publisher	Edp	Place of Publication	Coutaboeuf	Editor
	Language		Wos	000274582300033	Publication Date	2009-08-31
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN		ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	2	Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:81952			Serial	2626
Permanent link to this record



	Author	Idrissi, H.; Ryelandt, L.; Veron, M.; Schryvers, D.; Jacques, P.J.
	Title	Is there a relationship between the stacking fault character and the activated mode of plasticity of FeMn-based austenitic steels?			Type	A1 Journal article
	Year	2009	Publication	Scripta materialia	Abbreviated Journal	Scripta Mater
	Volume	60	Issue	11	Pages	941-944
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	By changing the testing temperature, an austenitic FeMnAlSi alloy presents either å-martensite transformation or mechanical twinning during straining. In order to understand the nucleation and growth mechanisms involved in both phenomena, defects and particularly stacking faults, were characterized by transmission electron microscopy. It is observed that the character of the stacking faults also changes (from extrinsic to intrinsic) together with the temperature and the activated mode of plasticity.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000265359900005	Publication Date	2009-02-10
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-6462;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.747	Times cited	84	Open Access
	Notes	Iap			Approved	Most recent IF: 3.747; 2009 IF: 2.949
	Call Number	UA @ lucian @ c:irua:77276			Serial	1751
Permanent link to this record



	Author	Idrissi, H.; Cordier, P.; Jacob, D.; Walte, N.
	Title	Dislocations and plasticity of experimentally deformed coesite			Type	A1 Journal article
	Year	2008	Publication	European journal of mineralogy	Abbreviated Journal	Eur J Mineral
	Volume	20	Issue	4	Pages	665-671
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Dislocation microstructures have been characterized by transmission electron microscopy in polycrystalline coesite deformed experimentally at 4 GPa, 1200 degrees C. Burgers vectors have been determined by large-angle convergent-beam electron diffraction. Sample orientation was assisted by precession electron diffraction to overcome difficulties arising from pseudo-hexagonal symmetry. The results are explained by using a pseudo-hexagonal setting. We found that most dislocations observed are of the 1/3 < 2 (1) over bar(1) over bar0 > type. No clear glide plane was identified, suggesting that climb is activated under these conditions. This conclusion is supported by the observation of numerous subgrain boundaries. We have also observed some [00011 dislocations. Finally, the C12/cl space group to which coesite belongs being centred, an additional slip system is observed: 1/6[(1) over bar2 (1) over bar3](01 (1) over bar1) (1/2[(1) over bar 10](110) in the monoclinic setting).
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Stuttgart	Editor
	Language		Wos	000262891900021	Publication Date	2008-08-29
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0935-1221;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.362	Times cited	5	Open Access
	Notes				Approved	Most recent IF: 1.362; 2008 IF: 1.220
	Call Number	UA @ lucian @ c:irua:94604			Serial	733
Permanent link to this record