Records |
Author |
van Oers, C.J.; Stevens, W.J.J.; Bruijn, E.; Mertens, M.; Lebedev, O.I.; Van Tendeloo, G.; Meynen, V.; Cool, P. |
Title |
Formation of a combined micro- and mesoporous material using zeolite Beta nanoparticles |
Type |
A1 Journal article |
Year ![sorted by Year field, descending order (down)](img/sort_desc.gif) |
2009 |
Publication |
Microporous and mesoporous materials: zeolites, clays, carbons and related materials |
Abbreviated Journal |
Micropor Mesopor Mat |
Volume |
120 |
Issue |
1/2 |
Pages |
29-34 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT); Laboratory of adsorption and catalysis (LADCA) |
Abstract |
Composite micro- and mesoporous materials are synthesized using zeolite Beta nanoparticles without the need for a structure directing agent to form the mesopores. This leads to important ecological and economical advantages. The influence of the way of cooling the aged nanoparticles solution on the formation of the composite materials has been studied. The materials have been characterized towards porosity by N2-sorption, towards zeolitic properties by TGA, DRIFT, XRD and TEM, towards aluminium content by EPMA. All prepared structures possess zeolitic properties. However, the method of cooling down of the aged seeds leads to differences in the porosity and intensity of the zeolitic characteristics. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Amsterdam |
Editor |
|
Language |
|
Wos |
000264619200006 |
Publication Date |
2008-09-12 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1387-1811; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
3.615 |
Times cited |
42 |
Open Access |
|
Notes |
Crp; Sfr Ua |
Approved |
Most recent IF: 3.615; 2009 IF: 2.652 |
Call Number |
UA @ lucian @ c:irua:74950 |
Serial |
1254 |
Permanent link to this record |
|
|
|
Author |
Shabalovskaya, S.A.; Tian, H.; Anderegg, J.W.; Schryvers, D.U.; Carroll, W.U.; van Humbeeck, J. |
Title |
The influence of surface oxides on the distribution and release of nickel from Nitinol wires |
Type |
A1 Journal article |
Year ![sorted by Year field, descending order (down)](img/sort_desc.gif) |
2009 |
Publication |
Biomaterials |
Abbreviated Journal |
Biomaterials |
Volume |
30 |
Issue |
4 |
Pages |
468-477 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
The patterns of Ni release from Nitinol vary depending on the type of material (NiTi alloys with low or no processing versus commercial wires or sheets). A thick TiO2 layer generated on the wire surface during processing is often considered as a reliable barrier against Ni release. The present study of Nitinol wires with surface oxides resulting from production was conducted to identify the sources of Ni release and its distribution in the surface sublayers. The chemistry and topography of the surfaces of Nitinol wires drawn using different techniques were studied with XPS and SEM. The distribution of Ni into surface depth and the surface oxide thickness were evaluated using Auger spectroscopy, TEM with FIB and ELNES. Ni release was estimated using either ICPA or AAS. Potentiodynamic potential polarization of selected wires was performed in as-received state with no strain and in treated strained samples. Wire samples in the as-received state showed low breakdown potentials (200 mV); the improved corrosion resistance of these wires after treatment was not affected by strain. It is shown how processing techniques affect surface topography, chemistry and also Ni release. Nitinol wires with the thickest surface oxide TiO2 (up to 720 nm) showed the highest Ni release, attributed to the presence of particles of essentially pure Ni whose number and size increased while approaching the interface between the surface and the bulk. The biological implications of high and lasting Ni release are also discussed. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Guildford |
Editor |
|
Language |
|
Wos |
000262065500006 |
Publication Date |
2008-11-09 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0142-9612; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
8.402 |
Times cited |
102 |
Open Access |
|
Notes |
Fwo; G.0465.05 |
Approved |
Most recent IF: 8.402; 2009 IF: 7.365 |
Call Number |
UA @ lucian @ c:irua:72320 |
Serial |
1641 |
Permanent link to this record |
|
|
|
Author |
Tirry, W.; Schryvers, D. |
Title |
Linking a completely three-dimensional nanostrain to a structural transformation eigenstrain |
Type |
A1 Journal article |
Year ![sorted by Year field, descending order (down)](img/sort_desc.gif) |
2009 |
Publication |
Nature materials |
Abbreviated Journal |
Nat Mater |
Volume |
8 |
Issue |
9 |
Pages |
752-757 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
NiTi is one of the most popular shape-memory alloys, a phenomenon resulting from a martensitic transformation. Commercial NiTi-based alloys are often thermally treated to contain Ni4Ti3 precipitates. The presence of these precipitates can introduce an extra transformation step related to the so-called R-phase. It is believed that the strain field surrounding the precipitates, caused by the matrixprecipitate lattice mismatch, lies at the origin of this intermediate transformation step. Atomic-resolution transmission electron microscopy in combination with geometrical phase analysis is used to measure the elastic strain field surrounding these precipitates. By combining measurements from two different crystallographic directions, the three-dimensional strain matrix is determined from two-dimensional measurements. Comparison of the measured strain matrix to the eigenstrain of the R-phase shows that both are very similar and that the introduction of the R-phase might indeed compensate the elastic strain introduced by the precipitate. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
London |
Editor |
|
Language |
|
Wos |
000269215500022 |
Publication Date |
2009-06-21 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1476-1122;1476-4660; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
39.737 |
Times cited |
53 |
Open Access |
|
Notes |
Multimat |
Approved |
Most recent IF: 39.737; 2009 IF: 29.504 |
Call Number |
UA @ lucian @ c:irua:77657 |
Serial |
1822 |
Permanent link to this record |
|
|
|
Author |
Salje, E.K.H.; Zhang, H.; Idrissi, H.; Schryvers, D.; Carpenter, M.A.; Moya, X.; Planes, A. |
Title |
Mechanical resonance of the austenite/martensite interface and the pinning of the martensitic microstructures by dislocations in Cu74.08Al23.13Be2.79 |
Type |
A1 Journal article |
Year ![sorted by Year field, descending order (down)](img/sort_desc.gif) |
2009 |
Publication |
Physical review: B: condensed matter and materials physics |
Abbreviated Journal |
Phys Rev B |
Volume |
80 |
Issue |
13 |
Pages |
134114,1-1134114,8 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
A single crystal of Cu74.08Al23.13Be2.79 undergoes a martensitic phase transition at 246 and 232 K under heating and cooling, respectively. The phase fronts between the austenite and martensite regions of the sample are weakly mobile with a power-law resonance under external stress fields. Surprisingly, the martensite phase is elastically much harder than the austenite phase showing that interfaces between various crystallographic variants are strongly pinned and cannot be moved by external stress while the phase boundary between the austenite and martensite regions in the sample remains mobile. This unusual behavior was studied by dynamical mechanical analysis (DMA) and resonant ultrasound spectroscopy. The remnant strain, storage modulus, and internal friction were recorded simultaneously for different applied forces in DMA. With increasing forces, the remnant strain increases monotonously while the internal friction peak height shows a minimum at 300 mN. Transmission electron microscopy shows that the pinning is generated by dislocations which are inherited from the austenite phase. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Lancaster, Pa |
Editor |
|
Language |
|
Wos |
000271351300033 |
Publication Date |
2009-10-22 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1098-0121;1550-235X; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
3.836 |
Times cited |
38 |
Open Access |
|
Notes |
Multimat |
Approved |
Most recent IF: 3.836; 2009 IF: 3.475 |
Call Number |
UA @ lucian @ c:irua:78542 |
Serial |
1975 |
Permanent link to this record |
|
|
|
Author |
Malard, B.; Pilch, J.; Sittner, P.; Gartnerova, V.; Delville, R.; Schryvers, D.; Curfs, C. |
Title |
Microstructure and functional property changes in thin Ni-Ti wires heat teated by electric current: high energy X-ray and TEM investigations |
Type |
A1 Journal article |
Year ![sorted by Year field, descending order (down)](img/sort_desc.gif) |
2009 |
Publication |
Functional materials letters |
Abbreviated Journal |
Funct Mater Lett |
Volume |
2 |
Issue |
2 |
Pages |
45-54 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
High energy synchrotron X-ray diffraction, transmission electron microscopy and mechanical testing were employed to investigate the evolution of microstructure, texture and functional superelastic properties of 0.1 mm thin as drawn NiTi wires subjected to a nonconventional heat treatment by controlled electric current (FTMT-EC method). As drawn NiTi wires were prestrained in tension and exposed to a sequence of short DC power pulses in the millisecond range. The annealing time in the FTMT-EC processing can be very short but the temperature and force could be very high compared to the conventional heat treatment of SMAs. It is shown that the heavily strained, partially amorphous microstructure of the as drawn NiTi wire transforms under the effect of the DC pulse and tensile stress into a wide range of annealed nanosized microstructures depending on the pulse time. The functional superelastic properties and microstructures of the FTMT-EC treated NiTi wire are comparable to those observed in straight annealed wires. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
000271077000001 |
Publication Date |
2009-07-22 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1793-6047;1793-7213; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
1.234 |
Times cited |
21 |
Open Access |
|
Notes |
Multimat |
Approved |
Most recent IF: 1.234; 2009 IF: 2.561 |
Call Number |
UA @ lucian @ c:irua:77656 |
Serial |
2052 |
Permanent link to this record |
|
|
|
Author |
Colomer, J.-F.; Marega, R.; Traboulsi, H.; Meneghetti, M.; Van Tendeloo, G.; Bonifazi, D. |
Title |
Microwave-assisted bromination of double-walled carbon nanotubes |
Type |
A1 Journal article |
Year ![sorted by Year field, descending order (down)](img/sort_desc.gif) |
2009 |
Publication |
Chemistry of materials |
Abbreviated Journal |
Chem Mater |
Volume |
21 |
Issue |
20 |
Pages |
4747-4749 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
|
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Washington, D.C. |
Editor |
|
Language |
|
Wos |
000270807800001 |
Publication Date |
2009-09-28 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0897-4756;1520-5002; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
9.466 |
Times cited |
46 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 9.466; 2009 IF: 5.368 |
Call Number |
UA @ lucian @ c:irua:94504 |
Serial |
2080 |
Permanent link to this record |
|
|
|
Author |
Vast, L.; Carpentier, L.; Lallemand, F.; Colomer, J.-F.; Van Tendeloo, G.; Fonseca, A.; Nagy, J.B.; Mekhalif, Z.; Delhalle, J. |
Title |
Multiwalled carbon nanotubes functionalized with 7-octenyltrichlorosilane and n-octyltrichlorosilane: dispersion in Sylgard®184 silicone and Youngs modulus |
Type |
A1 Journal article |
Year ![sorted by Year field, descending order (down)](img/sort_desc.gif) |
2009 |
Publication |
Journal of materials science |
Abbreviated Journal |
J Mater Sci |
Volume |
44 |
Issue |
13 |
Pages |
3476-3482 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
Sylgard®184/multiwalled carbon nanotube (MWNT) composites have been prepared by in situ polymerization using purified and functionalized multiwalled carbon nanotubes (f-MWNTs) as fillers. Surface modification of the MWNTs has been carried out by silanization with 7-octenyltrichlorosilane (7OTCS) and n-octyltrichlorosilane (nOTCS). The modification and dispersion of the carbon nanotubes in composites were characterized by X-ray photoelectron spectroscopy (XPS), transmission electron spectroscopy (TEM), and high-resolution transmission electron spectroscopy (HRTEM). Youngs modulus results were derived from indentation testing. It is shown that the terminal-vinyl group of 7OTCS molecules plays an essential role for both the dispersion of the f-MWNTs in the composite and its mechanical properties. At loading as low as 0.2 wt%, the Youngs modulus is shown to increase up to 50%. This is interpreted as resulting from a combination of the good compatibility in the forming silicone matrix of the MWNTs coated with a siloxane network, on the one hand, and the covalent links created between the terminal-vinyl groups and the host matrix in formation, on the other hand. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
London |
Editor |
|
Language |
|
Wos |
000267153200022 |
Publication Date |
2009-04-20 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0022-2461;1573-4803; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
2.599 |
Times cited |
16 |
Open Access |
|
Notes |
Iuap |
Approved |
Most recent IF: 2.599; 2009 IF: 1.471 |
Call Number |
UA @ lucian @ c:irua:77844 |
Serial |
2245 |
Permanent link to this record |
|
|
|
Author |
Vlasov, I.I.; Barnard, A.S.; Ralchenko, V.G.; Lebedev, O.I.; Kanzyuba, M.V.; Saveliev, A.V.; Konov, V.I.; Goovaerts, E. |
Title |
Nanodiamond photoemitters based on strong narrow-band luminescence from silicon-vacancy defects |
Type |
A1 Journal article |
Year ![sorted by Year field, descending order (down)](img/sort_desc.gif) |
2009 |
Publication |
Advanced materials |
Abbreviated Journal |
Adv Mater |
Volume |
21 |
Issue |
7 |
Pages |
808-812 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT); Nanostructured and organic optical and electronic materials (NANOrOPT) |
Abstract |
|
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Weinheim |
Editor |
|
Language |
|
Wos |
000263737800012 |
Publication Date |
2008-12-12 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0935-9648;1521-4095; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
19.791 |
Times cited |
98 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 19.791; 2009 IF: NA |
Call Number |
UA @ lucian @ c:irua:74513 |
Serial |
2253 |
Permanent link to this record |
|
|
|
Author |
Caignaert, V.; Abakumov, A.M.; Pelloquin, D.; Pralong, V.; Maignan, A.; Van Tendeloo, G.; Raveau, B. |
Title |
A new mixed-valence ferrite with a cubic structure, YBaFe4O7: spin-glass-like behavior |
Type |
A1 Journal article |
Year ![sorted by Year field, descending order (down)](img/sort_desc.gif) |
2009 |
Publication |
Chemistry of materials |
Abbreviated Journal |
Chem Mater |
Volume |
21 |
Issue |
6 |
Pages |
1116-1122 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
A new mixed-valence ferrite, YBaFe4O7, has been synthesized. Its unique cubic structure, with a = 8.9595(2) Å, is closely related to that of the hexagonal 114 oxides YBaCo4O7 and CaBaFe4O7. It consists of corner-sharing FeO4 tetrahedra, forming triangular and kagome layers parallel to (111)C. In fact, the YBaFe4O7 and CaBaFe4O7 structures can be described as two different ccc and chch close packings of [BaO3]∞ and [O4]∞ layers, respectively, whose tetrahedral cavities are occupied by Fe2+/Fe3+ cations. The local structure of YBaFe4O7 is characterized by a large amount of stacking faults originating from the presence of hexagonal layers in the ccc cubic close-packed YBaFe4O7 structure. In this way, they belong to the large family of spinels and hexagonal ferrites studied for their magnetic properties. Differently from all the ferrites and especially from CaBaFe4O7, which are ferrimagnetic, YBaFe4O7 is an insulating spin glass with Tg = 50 K. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Washington, D.C. |
Editor |
|
Language |
|
Wos |
000264310900019 |
Publication Date |
2009-02-25 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0897-4756;1520-5002; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
9.466 |
Times cited |
39 |
Open Access |
|
Notes |
Esteem 026019 |
Approved |
Most recent IF: 9.466; 2009 IF: 5.368 |
Call Number |
UA @ lucian @ c:irua:76432 |
Serial |
2325 |
Permanent link to this record |
|
|
|
Author |
Neyts, E.C.; Bogaerts, A. |
Title |
Numerical study of the size-dependent melting mechanisms of nickel nanoclusters |
Type |
A1 Journal article |
Year ![sorted by Year field, descending order (down)](img/sort_desc.gif) |
2009 |
Publication |
The journal of physical chemistry: C : nanomaterials and interfaces |
Abbreviated Journal |
J Phys Chem C |
Volume |
113 |
Issue |
7 |
Pages |
2771-2776 |
Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
Molecular dynamics simulations were used to investigate the size-dependent melting mechanism of nickel nanoclusters of various sizes. The melting process was monitored by the caloric curve, the overall cluster Lindemann index, and the atomic Lindemann index. Size-dependent melting temperatures were determined, and the correct linear dependence on inverse diameter was recovered. We found that the melting mechanism gradually changes from dynamic coexistence melting to surface melting with increasing cluster size. These findings are of importance in better understanding carbon nanotube growth by catalytic chemical vapor deposition as the phase state of the catalyst nanoparticle codetermines the growth mechanism. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Washington, D.C. |
Editor |
|
Language |
|
Wos |
|
Publication Date |
0000-00-00 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1932-7447 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
4.536 |
Times cited |
|
Open Access |
|
Notes |
|
Approved |
Most recent IF: 4.536; 2009 IF: 4.224 |
Call Number |
UA @ lucian @ c:irua:76495 |
Serial |
2410 |
Permanent link to this record |
|
|
|
Author |
Yang, X.-Y.; Li, Y.; Van Tendeloo, G.; Xiao, F.-S.; Su, B.-L. |
Title |
One-pot synthesis of catalytically stable and active nanoreactors: encapsulation of size-controlled nanoparticles within a hierarchically macroporous core@ordered mesoporous shell system |
Type |
A1 Journal article |
Year ![sorted by Year field, descending order (down)](img/sort_desc.gif) |
2009 |
Publication |
Advanced materials |
Abbreviated Journal |
Adv Mater |
Volume |
21 |
Issue |
13 |
Pages |
1368-1372 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
Size-controlled, catalytically active nanoparticles are successfully encapsulated in a one-pot synthesis to form novel hierarchical macroporous core@mesoporous shell structures, where macroporous cores are connected by uniform and ordered mesoporous channels. Most importantly, the encapsulated nanoparticles can be used as nanoreactors, with high activities and excellent long-term recycling stability. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Weinheim |
Editor |
|
Language |
|
Wos |
000265432700011 |
Publication Date |
2009-01-14 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0935-9648;1521-4095; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
19.791 |
Times cited |
61 |
Open Access |
|
Notes |
Iap |
Approved |
Most recent IF: 19.791; 2009 IF: NA |
Call Number |
UA @ lucian @ c:irua:77316 |
Serial |
2466 |
Permanent link to this record |
|
|
|
Author |
Kirschhock, C.E.A.; Liang, D.; Van Tendeloo, G.; Fécant, A.; Hastoye, G.; Vanbutsele, G.; Bats, N.; Guillon, E.; Martens, J.A. |
Title |
Ordered end-member of ZSM-48 zeolite family |
Type |
A1 Journal article |
Year ![sorted by Year field, descending order (down)](img/sort_desc.gif) |
2009 |
Publication |
Chemistry of materials |
Abbreviated Journal |
Chem Mater |
Volume |
21 |
Issue |
2 |
Pages |
371-380 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
ZSM-48 and related zeolites are considered to be highly disordered structures. Different polytypes can be clearly distinguished by simulation of high-resolution electron microscopy images. Synthesis of phase-pure polytypes was attempted. One of the investigated samples crystallized via seeding designated as COK-8 consisted of nanoscopic, needlelike crystals with a very large length/width ratio, growing along the pore direction. These specimens are phase-pure polytype 6 (PT6, numbering according to Lobo and van Koningsveld). Aggregates of these nanoneedles occasionally contained a second polytype: PT1. The latter polytype occurred more abundantly in larger crystal rods in an IZM-1 sample crystallized in ethylene glycol. Here too, the isolated crystallites mainly consist of large, defect-free regions of PT6. A simulation of polytype lattice energies offers a rational explanation for the observed polytypical intergrowth formation. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Washington, D.C. |
Editor |
|
Language |
|
Wos |
000262605200026 |
Publication Date |
2008-12-30 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0897-4756;1520-5002; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
9.466 |
Times cited |
30 |
Open Access |
|
Notes |
Fwo; Goa |
Approved |
Most recent IF: 9.466; 2009 IF: 5.368 |
Call Number |
UA @ lucian @ c:irua:76032 |
Serial |
2503 |
Permanent link to this record |
|
|
|
Author |
Esken, D.; Zhang, X.; Lebedev, O.I.; Schröder, F.; Fischer, R.A. |
Title |
Pd@MOF-5: limitations of gas-phase infiltration and solution impregnation of [Zn4O(bdc)3] (MOF-5) with metalorganic palladium precursors for loading with Pd nanoparticles |
Type |
A1 Journal article |
Year ![sorted by Year field, descending order (down)](img/sort_desc.gif) |
2009 |
Publication |
Journal of materials chemistry |
Abbreviated Journal |
J Mater Chem |
Volume |
19 |
Issue |
9 |
Pages |
1314-1319 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
The limitations of the loading of the porous metalorganic framework [Zn4O(bdc)3] (bdc = benzene-1,4-dicarboxylate; MOF-5 or IRMOF-1) with Pd nanoparticles was investigated. First, the volatile organometallic precursor [Pd(5-C5H5)(3-C3H5)] was employed to get the inclusion compound [Pd(5-C5H5)(3-C3H5)]x@MOF-5 via gas-phase infiltration at 10-3 mbar. A loading of four molecules of [Pd(5-C5H5)(3-C3H5)] per formula unit of MOF-5 (x = 4) can be reached (35 wt.% Pd). Second, the metalorganic precursor [Pd(acac)2] (acac = 2,4-pentanedionate) was used and the inclusion materials [Pd(acac)2]x@MOF-5 of different Pd loadings were obtained by incipient wetness infiltration. However, the maximum loading was lower as compared with the former case with about two precursor molecules per formula unit of MOF-5. Both loading routes are suitable for the synthesis of Pd nanoparticles inside the porous host matrix. Homogeneously distributed nanoparticles with diameter of 2.4(±0.2) nm can be achieved by photolysis of the inclusion compounds [Pd(5-C5H5)(3-C3H5)]x@MOF-5 (x 4), while the hydrogenolysis of [Pd(acac)2]x@MOF-5 (x 2) leads to a mixture of small particles inside the network (< 3 nm) and large Pd agglomerates (40 nm) on the outer surface of the MOF-5 specimens. The pure Pdx@MOF-5 materials proved to be stable under hydrogen pressure (2 bar) at 150 °C over many hours. Neither hydrogenation of the bdc linkers nor particle growth was observed. The new composite materials were characterized by 1H/13C-MAS-NMR, powder XRD, ICP-AES, FT-IR, N2 sorption measurements and high resolution TEM. Raising the Pd loading of a representative sample Pd4@MOF-5 (35 wt.% Pd) by using [Pd(5-C5H5)(3-C3H5)] as precursor in a second cycle of gas-phase infiltration and photolysis was accompanied by the collapse of the long-range crystalline order of the MOF. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Cambridge |
Editor |
|
Language |
|
Wos |
000263450300015 |
Publication Date |
2009-01-22 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0959-9428;1364-5501; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
|
Times cited |
100 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: NA |
Call Number |
UA @ lucian @ c:irua:76318 |
Serial |
2565 |
Permanent link to this record |
|
|
|
Author |
Smeulders, G.; Meynen, V.; van Baelen, G.; Mertens, M.; Lebedev, O.I.; Van Tendeloo, G.; Maes, B.U.W.; Cool, P. |
Title |
Rapid microwave-assisted synthesis of benzene bridged periodic mesoporous organosilicas |
Type |
A1 Journal article |
Year ![sorted by Year field, descending order (down)](img/sort_desc.gif) |
2009 |
Publication |
Journal of materials chemistry |
Abbreviated Journal |
J Mater Chem |
Volume |
19 |
Issue |
19 |
Pages |
3042-3048 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT); Laboratory of adsorption and catalysis (LADCA); Organic synthesis (ORSY) |
Abstract |
Following extended use in organic chemistry, microwave-assisted synthesis is gaining more importance in the field of inorganic chemistry, especially for the synthesis of nanoporous materials. It offers some major advantages such as a significant shortening of the synthesis time and an improved promotion of nucleation. In the research here reported, microwave technology is applied for the synthesis of benzene bridged PMOs (periodic mesoporous organosilicas). PMOs are one of the latest innovations in the field of hybrid ordered mesoporous materials and have attracted much attention because of their feasibility in electronics, catalysis, separation and sorption applications. The different synthesis steps (stirring, aging and extraction) of the classical PMO synthesis are replaced by microwave-assisted synthesis steps. The characteristics of the as-synthesized materials are evaluated by X-ray diffraction, N2-sorption, thermogravimetric analysis, scanning- and transmission electron microscopy. The microwave-assisted synthesis drastically reduces the synthesis time by more than 40 hours without any loss in structural properties, such as mesoscale and molecular ordering. The porosity of the PMO materials has even been improved by more than 25%. Moreover, the number of handling/transfer steps and amounts of chemicals and waste are drastically reduced. The study also shows that there is a clear time (1 to 3 hours) and temperature frame (373 K to 403 K) wherein synthesis of benzene bridged PMO is optimal. In conclusion, the microwave-assisted synthesis pathway allows an improved material to be obtained in a more economical way i.e. a much shorter time with fewer chemicals and less waste. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Cambridge |
Editor |
|
Language |
|
Wos |
000265919300024 |
Publication Date |
2009-03-17 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0959-9428;1364-5501; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
|
Times cited |
20 |
Open Access |
|
Notes |
Fwo; Iwt |
Approved |
Most recent IF: NA |
Call Number |
UA @ lucian @ c:irua:76844 |
Serial |
2810 |
Permanent link to this record |
|
|
|
Author |
Neira, I.S.; Kolen'ko, Y.V.; Lebedev, O.I.; Van Tendeloo, G.; Gupta, H.S.; Matsushita, N.; Yoshimura, M.; Guitian, F. |
Title |
Rational synthesis of a nanocrystalline calcium phosphate cement exhibiting rapid conversion to hydroxyapatite |
Type |
A1 Journal article |
Year ![sorted by Year field, descending order (down)](img/sort_desc.gif) |
2009 |
Publication |
Materials science and engineering: part C: biomimetic materials |
Abbreviated Journal |
Mat Sci Eng C-Mater |
Volume |
29 |
Issue |
7 |
Pages |
2124-2132 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
The rational synthesis, comprehensive characterization, and mechanical and micromechanical properties of a calcium phosphate cement are presented. Hydroxyapatite cement biomaterial was synthesized from reactive sub-micrometer-sized dicalcium phosphate dihydrate and tetracalcium phosphate via a dissolution-precipitation reaction using water as the liquid phase. As a result nanostructured, Ca-deficient and carbonated B-type hydroxyapatite is formed. The cement shows good processibility, sets in 22 ± 2 min and entirely transforms to the end product after 6 h of setting reaction, one of the highest conversion rates among previously reported for calcium phosphate cements based on dicalcium and tetracalcium phosphates. The combination of all elucidated physical-chemical traits leads to an essential bioactivity and biocompatibility of the cement, as revealed by in vitro acellular simulated body fluid and cell culture studies. The compressive strength of the produced cement biomaterial was established to be 25 ± 3 MPa. Furthermore, nanoindentation tests were performed directly on the cement to probe its local elasticity and plasticity at sub-micrometer/micrometer level. The measured elastic modulus and hardness were established to be Es = 23 ± 3.5 and H = 0.7 ± 0.2 GPa, respectively. These values are in close agreement with those reported in literature for trabecular and cortical bones, reflecting good elastic and plastic coherence between synthesized cement biomaterial and human bones. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Lausanne |
Editor |
|
Language |
|
Wos |
000270159200008 |
Publication Date |
2009-04-20 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0928-4931; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
4.164 |
Times cited |
18 |
Open Access |
|
Notes |
Esteem 026019 |
Approved |
Most recent IF: 4.164; 2009 IF: NA |
Call Number |
UA @ lucian @ c:irua:79312 |
Serial |
2812 |
Permanent link to this record |
|
|
|
Author |
Lisiecki, I.; Turner, S.; Bals, S.; Pileni, M.P.; Van Tendeloo, G. |
Title |
The remarkable and intriguing resistance to oxidation of 2D ordered hcp Co nanocrystals: a new intrinsic property |
Type |
A1 Journal article |
Year ![sorted by Year field, descending order (down)](img/sort_desc.gif) |
2009 |
Publication |
Chemistry of materials |
Abbreviated Journal |
Chem Mater |
Volume |
21 |
Issue |
12 |
Pages |
2335-2338 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
|
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Washington, D.C. |
Editor |
|
Language |
|
Wos |
000267049200001 |
Publication Date |
2009-05-14 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0897-4756;1520-5002; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
9.466 |
Times cited |
28 |
Open Access |
|
Notes |
Iap-Vi; Esteem 026019 |
Approved |
Most recent IF: 9.466; 2009 IF: 5.368 |
Call Number |
UA @ lucian @ c:irua:77887 |
Serial |
2867 |
Permanent link to this record |
|
|
|
Author |
Parsons, T.G.; d' Hondt, H.; Hadermann, J.; Hayward, M.A. |
Title |
Synthesis and structural characterization of La1-xAxMnO2.5 (A = Ba, Sr, Ca) phases: mapping the variants of the brownmillerite structure |
Type |
A1 Journal article |
Year ![sorted by Year field, descending order (down)](img/sort_desc.gif) |
2009 |
Publication |
Chemistry of materials |
Abbreviated Journal |
Chem Mater |
Volume |
21 |
Issue |
22 |
Pages |
5527-5538 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
Analysis of the structural parameters of phases that adopt brownmillerite-type structures suggests the distribution of the different complex ordering schemes adopted within this structure type can be rationalized by considering both the size of the separation between the tetrahedral layers and the tetrahedral chain distortion angle. A systematic study using structural data obtained from La1−xAxMnO2,5 (A = Ba, Sr, Ca,) phases, prepared by the topotactic reduction of the analogous La1−xAxMnO3 perovskite phases, was performed to investigate this relationship. By manipulating the A-cation composition, both the tetrahedral layer separation and tetrahedral chain distortion angle in the La1−xAxMnO2,5 phases were controlled and from the data obtained a ¡°structure map¡± of the different brownmillerite variants was plotted as a function of these structural parameters. This map has been extended to include a wide range of reported brownmillerite phases showing the structural ideas presented are widely applicable. The complete structural characterization of La1−xAxMnO2,5 0.1 ¡Ü x ¡Ü 0.33, A = Ba; 0.15 ¡Ü x ¡Ü 0.5 A = Sr, and 0.22 ¡Ü x ¡Ü 0.5 A = Ca is described and includes compositions which exhibit complex intralayer ordered structures and Mn2+/Mn3+ charge ordering. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Washington, D.C. |
Editor |
|
Language |
|
Wos |
000271756400021 |
Publication Date |
2009-10-29 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0897-4756;1520-5002; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
9.466 |
Times cited |
60 |
Open Access |
|
Notes |
Iap Vi |
Approved |
Most recent IF: 9.466; 2009 IF: 5.368 |
Call Number |
UA @ lucian @ c:irua:79935 |
Serial |
3435 |
Permanent link to this record |
|
|
|
Author |
Mandal, T.K.; Croft, M.; Hadermann, J.; Van Tendeloo, G.; Stephens, P.W.; Greenblatt, M. |
Title |
La2MnVO6 double perovskite: a structural, magnetic and X-ray absorption investigation |
Type |
A1 Journal article |
Year ![sorted by Year field, descending order (down)](img/sort_desc.gif) |
2009 |
Publication |
Journal of materials chemistry |
Abbreviated Journal |
J Mater Chem |
Volume |
19 |
Issue |
25 |
Pages |
4382-4390 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
The synthesis, electron diffraction (ED), synchrotron X-ray and neutron structure, X-ray absorption spectroscopy (XAS) and magnetic property studies of La2MnVO6 double perovskite are described. Analysis of the synchrotron powder X-ray diffraction data for La2MnVO6 indicates a disordered arrangement of Mn and V at the B-site of the perovskite structure. Absence of super-lattice reflections in the ED patterns for La2MnVO6 supports the disordered cation arrangement. Room temperature time-of-flight (TOF) neutron powder diffraction (NPD) data show no evidence of cation ordering, in corroboration with the ED and synchrotron studies (orthorhombic Pnma, a = 5.6097(3), b = 7.8837(5) and c = 5.5668(3) ; 295 K, NPD). A comparison of XAS analyses of La2TVO6 with T = Ni and Co shows T2+ formal oxidation state while the T = Mn material evidences a Mn3+ admixture into a dominantly Mn2+ ground state. V-K edge measurements manifest a mirror image behavior with a V4+ state for T = Ni and Co with a V3+ admixture arising in the T = Mn material. The magnetic susceptibility data for La2MnVO6 show ferromagnetic correlations; the observed effective moment, µeff (5.72 µB) is much smaller than the calculated moment (6.16 µB) based on the spin-only formula for Mn2+ (d5, HS) /V4+ (d1), supportive of the partly oxidized Mn and reduced V scenario (Mn3+/V3+). |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Cambridge |
Editor |
|
Language |
|
Wos |
000266989800015 |
Publication Date |
2009-04-24 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0959-9428;1364-5501; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
|
Times cited |
10 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: NA |
Call Number |
UA @ lucian @ c:irua:77367 |
Serial |
3540 |
Permanent link to this record |
|
|
|
Author |
Pop, N.; Pralong, V.; Caignaert, V.; Colin, J.F.; Malo, S.; Van Tendeloo, G.; Raveau, B. |
Title |
Topotactic transformation of the cationic conductor Li4Mo5O17 into a rock salt type oxide Li12Mo5O17 |
Type |
A1 Journal article |
Year ![sorted by Year field, descending order (down)](img/sort_desc.gif) |
2009 |
Publication |
Chemistry of materials |
Abbreviated Journal |
Chem Mater |
Volume |
21 |
Issue |
14 |
Pages |
3242-3250 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
Intercalation of lithium in the ribbon structure Li4Mo5O17 has been achieved, using both electrochemistry and soft chemistry. The ab initio structure determination of the ¡°Mo−O¡± framework of Li12Mo5O17 shows that the [Mo5O17]¡Þ ribbons keep the same arrangement of edge sharing MoO6 octahedra and the same orientation as in the parent structure but that a topotactic antidistortion of the ribbons appears, as a result of the larger size of Mo4+ in ¡°Li12¡± compared to Mo6+ in ¡°Li4¡±. On the basis of bond valence calculations, it is observed that 12 octahedral sites are available for Li+ in the new structure so that an ordered hypothetical rock salt type structure can be proposed for Li12Mo5O17. After the first Li insertion, a stable reversible capacity of 100 mA¡¤h/g is maintained after 20 cycles. A complete structural reversibility leading back to the ribbon type Li4Mo5O17 structure is obtained using a very low rate of C/100. The exploration of the Li mobility in those oxides shows that Li4Mo5O17 is a cationic conductor with ¦Ò = 10−3.5 S/cm at 500 ¡ãC and Ea = 0.35 eV. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Washington, D.C. |
Editor |
|
Language |
|
Wos |
000268174400032 |
Publication Date |
2009-06-24 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0897-4756;1520-5002; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
9.466 |
Times cited |
18 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 9.466; 2009 IF: 5.368 |
Call Number |
UA @ lucian @ c:irua:78285 |
Serial |
3682 |
Permanent link to this record |
|
|
|
Author |
Verstraelen, H.; de Baere, K.; Schillemans, W.; Lemmens, L.; Dewil, R.; Lenaerts, S.; Potters, G. |
Title |
In situ study of ballast tank corrosion on ships: part 1 |
Type |
A1 Journal article |
Year ![sorted by Year field, descending order (down)](img/sort_desc.gif) |
2009 |
Publication |
Materials performance |
Abbreviated Journal |
Mater Performance |
Volume |
48 |
Issue |
10 |
Pages |
48-51 |
Keywords |
A1 Journal article; Engineering sciences. Technology; Theory of quantum systems and complex systems; Sustainable Energy, Air and Water Technology (DuEL) |
Abstract |
|
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
|
Publication Date |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0094-1492 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles; WoS full record; WoS citing articles |
Impact Factor |
0.149 |
Times cited |
|
Open Access |
|
Notes |
|
Approved |
Most recent IF: 0.149; 2009 IF: 0.124 |
Call Number |
UA @ admin @ c:irua:78547 |
Serial |
5963 |
Permanent link to this record |
|
|
|
Author |
Verstraelen, H.; de Baere, K.; Schillemans, W.; Lemmens, L.; Dewil, R.; Lenaerts, S.; Potters, G. |
Title |
In situ study of ballast tank corrosion on ships: part 2 |
Type |
A1 Journal article |
Year ![sorted by Year field, descending order (down)](img/sort_desc.gif) |
2009 |
Publication |
Materials performance |
Abbreviated Journal |
Mater Performance |
Volume |
48 |
Issue |
11 |
Pages |
54-57 |
Keywords |
A1 Journal article; Engineering sciences. Technology; Theory of quantum systems and complex systems; Sustainable Energy, Air and Water Technology (DuEL) |
Abstract |
A study was undertaken to determine causes and effects of corrosion processes in ballast tanks. Part 1 of this article (October 2009 MP) described the data collection. Part 2 describes the development of a corrosion index (CI) derived from the general International Association of Classification Societies corrosion assessment methods. The CI can be used in situ to assess ballast tank corrosion. An average timeline for-corrosion of tanks is presented. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
|
Publication Date |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0094-1492 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
0.149 |
Times cited |
|
Open Access |
|
Notes |
|
Approved |
Most recent IF: 0.149; 2009 IF: 0.124 |
Call Number |
UA @ admin @ c:irua:79761 |
Serial |
5964 |
Permanent link to this record |
|
|
|
Author |
Damla, N.; Čevik, U.; Kobya, A.I.; Celik, A.; Van Grieken, R.; Kobya, Y. |
Title |
Characterization of gas concrete materials used in buildings of Turkey |
Type |
A1 Journal article |
Year ![sorted by Year field, descending order (down)](img/sort_desc.gif) |
2009 |
Publication |
Journal of hazardous materials |
Abbreviated Journal |
|
Volume |
168 |
Issue |
2/3 |
Pages |
681-687 |
Keywords |
A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation) |
Abstract |
The activity concentration of 226Ra, 232Th and 40K in gas concrete samples collected from different suppliers and some provinces in Turkey were measured using gamma-ray spectrometry. Knowledge of radioactivity in gas concrete used in building materials enables one to assess any possible radiological risks to human health. The mean activity concentrations observed in the gas concrete samples were 82.0, 28.2 and 383.9 Bq kg−1 for 226Ra, 232Th and 40K, respectively. The radium equivalent activity, external and internal hazard indices as well as terrestrial absorbed dose and annual effective dose rate was calculated. The results indicate that the radium equivalent activity values of gas concrete samples are lower than the limit of 370 Bq kg−1, equivalent to a gamma-dose of 1.5 mSv y−1. Moreover, mass attenuation coefficients were measured in some gas concrete samples. It was found that the mass attenuation coefficients decreased with increasing photon energies. Also, chemical compositions and structural analysis (XRD and SEM) of the gas concrete samples were investigated. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
000268200700014 |
Publication Date |
2009-02-26 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0304-3894 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
|
Times cited |
|
Open Access |
|
Notes |
|
Approved |
no |
Call Number |
UA @ admin @ c:irua:77256 |
Serial |
7621 |
Permanent link to this record |
|
|
|
Author |
Stefaniak, E.A.; Alsecz, A.; Frost, R.; Máthé, Z.; Sajó, I.E.; Török, S.; Worobiec, A.; Van Grieken, R. |
Title |
Combined SEM/EDX and micro-Raman spectroscopy analysis of uranium minerals from a former uranium mine |
Type |
A1 Journal article |
Year ![sorted by Year field, descending order (down)](img/sort_desc.gif) |
2009 |
Publication |
Journal of hazardous materials |
Abbreviated Journal |
|
Volume |
168 |
Issue |
1 |
Pages |
416-423 |
Keywords |
A1 Journal article; Laboratory Experimental Medicine and Pediatrics (LEMP); AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation) |
Abstract |
Samples of the secondary uranium minerals collected in the abandoned uranium mine at Pecs (Hungary) were investigated by two micro-techniques: scanning electron microscopy (SEM/EDX) and micro-Raman spectroscopy (MRS). They were applied to locate U-rich particles and identify the chemical form and oxidation state of the uranium compounds. The most abundant mineral was a K and/or Na uranyl sulphate (zippeite group). U(VI) was also present in the form showing intensive Raman scattering at 860 cm−1 which can be attributed to uranium trioxide. This research has shown the successful application of micro-Raman spectroscopy for the identification of uranyl mineral species on the level of individual particles. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
000267567600060 |
Publication Date |
2009-02-22 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0304-3894 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
|
Times cited |
|
Open Access |
|
Notes |
|
Approved |
no |
Call Number |
UA @ admin @ c:irua:77032 |
Serial |
7681 |
Permanent link to this record |
|
|
|
Author |
Nowak, D.; Florek, M.; Nowak, J.; Kwiatek, W.; Lekki, J.; Chevallier, P.; Hacura, A.; Wrzalik, R.; Ben-Nissan, B.; Van Grieken, R.; Kuczumow, A. |
Title |
Morphology and the chemical make-up of the inorganic components of black corals |
Type |
A1 Journal article |
Year ![sorted by Year field, descending order (down)](img/sort_desc.gif) |
2009 |
Publication |
Materials science and engineering: part C: biomimetic materials |
Abbreviated Journal |
|
Volume |
29 |
Issue |
3 |
Pages |
1029-1038 |
Keywords |
A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation) |
Abstract |
Black corals (Cnidaria, Antipatharia) from three different sources were investigated with the aim of detecting inorganic components and their morphology. In general, the skeleton of black corals was composed of the chitin fibrils admixed with peptides and the chitin presence was confirmed by the X-ray diffraction (XRD), Fourier Transformed Infrared Spectrometry (FTIR) and microRaman Microscopy, the latter giving the opportunity of tracing single fibrils and their location. The composition and concentrations of the inorganic components of the black corals were measured, using a scanning electron microprobe and micro-Particle Induced X-ray Emission (µ-PIXE). The application of such instruments enabled the estimation of the constituent distributions in a microscale. The mapping option was the most useful technique of making analyses in these studies, just to reveal the composition of chamber-like cells. Analysis of the morphology and microstructure showed that there were three distinct regions within the coral: a core and the cells encircled with adjacent interface gluing strips. The majority of the elements analyzed were selectively distributed and segregated in a striking way in mentioned distinctive zones of the skeleton and it was detected for the first time. The core area was characterized by the relatively elevated concentrations of Ca. The measurements gave extremely clear images of the distribution of particular elements in the skeletal tissue, with I, Ca, K and Fe much more concentrated in the gluing zones, while C, N, Na and Mg present in the interiors of particular skeletal cells. The distribution of some elements (Mg, Fe) and some compounds (chitin) and functional groups (SS, CI) allows differentiating the biological and mechanical functions of particular fragments of the rods. The kinds of elements and their concentrations measured were essentially in compliance with rare data available in the literature. The Raman technique gave the additional qualitative information about the structure of gluing zone and the chitin fibrils and surrounding matrix inside the cell interior. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
000266520400065 |
Publication Date |
2008-09-10 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0928-4931 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
|
Times cited |
|
Open Access |
|
Notes |
|
Approved |
no |
Call Number |
UA @ admin @ c:irua:76024 |
Serial |
8284 |
Permanent link to this record |
|
|
|
Author |
Celik, N.; Čevik, U.; Celik, A.; Koz, B. |
Title |
Natural and artificial radioactivity measurements in Eastern Black Sea region of Turkey |
Type |
A1 Journal article |
Year ![sorted by Year field, descending order (down)](img/sort_desc.gif) |
2009 |
Publication |
Journal of hazardous materials |
Abbreviated Journal |
|
Volume |
162 |
Issue |
1 |
Pages |
146-153 |
Keywords |
A1 Journal article; Engineering sciences. Technology; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation) |
Abstract |
In the present work, naturally occurring radionuclides of (226)Ra, (232)Th and (40)K were measured in soil samples collected from the Eastern Black Sea region of Turkey. It was found that the activity concentrations ranged from 12 to 120 Bq kg(-1) for (226)Ra, from 13 to 121 Bq kg(-1) for (232)Th and from 204 to 1295 Bq kg(-1) for (40)K. Besides naturally occurring radionuclides, (137)Cs activity concentration was measured in soil, lichen and moss samples and it was found that (137)Cs activity concentration ranged from 27 to 775 Bq kg(-1) with for soil, from 29 to 879 Bq kg(-1) for lichen and from 67 to 1396 Bq kg(-1) for moss samples. Annual effective doses due to the naturally occurring radionuclides and (137)CS were estimated. Ecological half-lives of (137)CS in lichen and moss species were estimated. The decrease of the activity concentrations in the present measurements (2007) relative to those in 1993 indicated ecological half-lives between 1.36 and 2.96 years for lichen and between 1.35 and 2.85 years for moss species. (C) 2008 Elsevier B.V. All rights reserved. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
000263149400019 |
Publication Date |
2008-05-10 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0304-3894 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
|
Times cited |
|
Open Access |
|
Notes |
|
Approved |
no |
Call Number |
UA @ admin @ c:irua:94562 |
Serial |
8296 |
Permanent link to this record |
|
|
|
Author |
Cao, S.; Tirry, W.; van den Broek, W.; Schryvers, D. |
Title |
3D reconstruction of Ni4Ti3 precipitates in a Ni51Ti49 alloy in a FIB/SEM dual-beam system |
Type |
A1 Journal article |
Year ![sorted by Year field, descending order (down)](img/sort_desc.gif) |
2008 |
Publication |
Materials science forum |
Abbreviated Journal |
|
Volume |
583 |
Issue |
|
Pages |
277-284 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab |
Abstract |
Ni4Ti3 precipitates play an important role in the shape memory and superelastic behaviour of thermo-mechanically treated Ni-Ti material. The 3D morphology and distribution of such precipitates with lenticular shape and rhombohedral atomic structure in the austenitic B2 matrix of a binary Ni-rich Ni-Ti alloy has been elucidated via a slice view procedure in a Dual-Beam FIB/SEM system. With the sequence of cross-section SE images obtained from the SEM, a 3D reconstruction has been achieved after proper alignment and image processing, from which both qualitative and quantitative analysis can be performed. Careful imaging is needed to ensure that all variants of the precipitates are observed with equal probability, regardless sample orientation. Moreover, due to the weak contrast of the precipitates, proper imaging conditions need to be selected to allow for semi-automated image treatment. Finally, a volume ratio of 10.2% for the Ni4Ti3 precipitates could be calculated, summed over all variants, which yields a net composition of Ni50.36Ti49.64 for the matrix, leading to an increase of 113 degrees for the martensitic start temperature Ms. Also, the expected relative orientation of the different variants of the precipitates could be confirmed. In the near future, other quantitative measures on the distribution of the precipitates can be expected. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Lausanne |
Editor |
|
Language |
|
Wos |
|
Publication Date |
2009-03-11 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1662-9752; |
ISBN |
|
Additional Links |
UA library record |
Impact Factor |
|
Times cited |
|
Open Access |
|
Notes |
Multimat; Fwo |
Approved |
Most recent IF: NA |
Call Number |
UA @ lucian @ c:irua:77454 |
Serial |
16 |
Permanent link to this record |
|
|
|
Author |
Leenaerts, O.; Partoens, B.; Peeters, F.M. |
Title |
Adsorption of H2O, NH3, CO, NO2, and NO on graphene: a first-principles study |
Type |
A1 Journal article |
Year ![sorted by Year field, descending order (down)](img/sort_desc.gif) |
2008 |
Publication |
Physical review : B : condensed matter and materials physics |
Abbreviated Journal |
Phys Rev B |
Volume |
77 |
Issue |
|
Pages |
125416,1-6 |
Keywords |
A1 Journal article; Condensed Matter Theory (CMT) |
Abstract |
Motivated by the recent realization of graphene sensors to detect individual gas molecules, we investigate the adsorption of H2O, NH3, CO, NO2, and NO on a graphene substrate using first-principles calculations. The optimal adsorption position and orientation of these molecules on the graphene surface is determined and the adsorption energies are calculated. Molecular doping, i.e., charge transfer between the molecules and the graphene surface, is discussed in light of the density of states and the molecular orbitals of the adsorbates. The efficiency of doping of the different molecules is determined and the influence of their magnetic moment is discussed. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Lancaster, Pa |
Editor |
|
Language |
|
Wos |
000254543000133 |
Publication Date |
2008-03-18 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1098-0121;1550-235X; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
3.836 |
Times cited |
1392 |
Open Access |
|
Notes |
This work was supported by the Flemish Science Foundation FWO-Vl, by the NOI-BOF of the University of Antwerp, and by the Belgian Science Policy IAP. |
Approved |
Most recent IF: 3.836; 2008 IF: 3.322 |
Call Number |
UA @ lucian @ c:irua:69634 |
Serial |
67 |
Permanent link to this record |
|
|
|
Author |
Compemolle, S.; Pourtois, G.; Sorée, B.; Magnus, W.; Chibotaru, L.F.; Ceulemans, A. |
Title |
Conductance of a copper-nanotube bundle interface: impact of interface geometry and wave-function interference |
Type |
A1 Journal article |
Year ![sorted by Year field, descending order (down)](img/sort_desc.gif) |
2008 |
Publication |
Physical review : B : condensed matter and materials physics |
Abbreviated Journal |
Phys Rev B |
Volume |
77 |
Issue |
19 |
Pages |
193406,1-4 |
Keywords |
A1 Journal article; Condensed Matter Theory (CMT); Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
|
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Lancaster, Pa |
Editor |
|
Language |
|
Wos |
000256971600032 |
Publication Date |
2008-05-20 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1098-0121;1550-235X; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
3.836 |
Times cited |
8 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 3.836; 2008 IF: 3.322 |
Call Number |
UA @ lucian @ c:irua:70215 |
Serial |
479 |
Permanent link to this record |
|
|
|
Author |
Wang, Z.-H.; Lebedev, O.I.; Van Tendeloo, G.; Cristiani, G.; Habermeier, H.-U. |
Title |
Crosshatching on La0.5Ca0.5MnO3 ultrathin films epitaxially grown on SrTiO3(100) |
Type |
A1 Journal article |
Year ![sorted by Year field, descending order (down)](img/sort_desc.gif) |
2008 |
Publication |
Physical review : B : condensed matter and materials physics |
Abbreviated Journal |
Phys Rev B |
Volume |
77 |
Issue |
11 |
Pages |
1-5 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
The morphological evolution in La(0.5)Ca(0.5)MnO(3)/SrTiO(3)(100) ultrathin films has been revealed by atomic force microscopy. It was found that ordered linear defects, which are in 1-2 unit cells high and oriented along the cubic [110] and [100] directions, first appear on the smooth surface of films with a thickness of 10 nm. As the epitaxial growth proceeds, these lines on surface develop into a crosshatch pattern for films with a thickness of 25 nm. Using the results of transmission electron microscopy and electrical measurements, we discuss the interplay between the surface pattern formation, the internal dislocation structure, and the variations in the electrical properties. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Lancaster, Pa |
Editor |
|
Language |
|
Wos |
000254542800126 |
Publication Date |
2008-03-18 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1098-0121;1550-235X; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
3.836 |
Times cited |
8 |
Open Access |
|
Notes |
ESTEEM nr 026019 |
Approved |
Most recent IF: 3.836; 2008 IF: 3.322 |
Call Number |
UA @ lucian @ c:irua:70022 |
Serial |
548 |
Permanent link to this record |
|
|
|
Author |
Nikolaev, I.V.; d' Hondt, H.; Abakumov, A.M.; Hadermann, J.; Balagurov, A.M.; Bobrikov, I.A.; Sheptyakov, D.V.; Pomjakushin, V.Y.; Pokholok, K.V.; Filimonov, D.S.; Van Tendeloo, G.; Antipov, E.V. |
Title |
Crystal structure, phase transition, and magnetic ordering in perovskitelike Pb2-xBaxFe2O5 solid solutions |
Type |
A1 Journal article |
Year ![sorted by Year field, descending order (down)](img/sort_desc.gif) |
2008 |
Publication |
Physical review : B : condensed matter and materials physics |
Abbreviated Journal |
Phys Rev B |
Volume |
78 |
Issue |
2 |
Pages |
024426,1-12 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
|
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Lancaster, Pa |
Editor |
|
Language |
|
Wos |
000258190200085 |
Publication Date |
2008-07-24 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1098-0121;1550-235X; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
3.836 |
Times cited |
29 |
Open Access |
|
Notes |
Iap Vi |
Approved |
Most recent IF: 3.836; 2008 IF: 3.322 |
Call Number |
UA @ lucian @ c:irua:70580 |
Serial |
576 |
Permanent link to this record |