NANOlab Center of Excellence literature database -- Query Results

	NANOlab Center of Excellence literature database Home \| Show All \| Simple Search \| Advanced Search	Login Quick Search: Field: contains: ...
	31–60 of 92 records found matching your query (RSS \| history):

Select All Deselect All

<< 1 2 3 4 >>

List View

Citations

Details

	Records
	Author	Aghaei, M.; Lindner, H.; Bogaerts, A.
	Title	Optimization of operating parameters for inductively coupled plasma mass spectrometry : a computational study			Type	A1 Journal article
	Year	2012	Publication	Spectrochimica acta: part B : atomic spectroscopy	Abbreviated Journal	Spectrochim Acta B
	Volume	76	Issue		Pages	56-64
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	An inductively coupled plasma, connected to a mass spectrometer interface, is computationally investigated. The effect of pressure behind the sampler, injector gas flow rate, auxiliary gas flow rate, and applied power is studied. There seems to be an optimum range of injector gas flow rate for each setup which guaranties the presence and also a proper length of the central channel in the torch. Moreover, our modeling results show that for any specific purpose, it is possible to control that either only the central gas flow passes through the sampler orifice or that it is accompanied by the auxiliary gas flow. It was also found that depending on geometry, the variation of outgoing gas flow rate is much less than the variation of the injector gas flow rate and this causes a slightly higher pressure inside the torch. The general effect of increasing the applied power is a rise in the plasma temperature, which results in a higher ionization in the coil region. However, the negative effect is reducing the length of the cool central channel which is important to transfer the sample substances to the sampler. Using a proper applied power can enhance the efficiency of the system. Indeed, by changing the gas path lines, the power can control which flow (i.e., only from injector gas or also from the auxiliary gas) goes to the sampler orifice. Finally, as also reported from experiments in literature, the pressure behind the sampler has no dramatic effect on the plasma characteristics.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000311008600008	Publication Date	2012-06-23
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0584-8547;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.241	Times cited	18	Open Access
	Notes				Approved	Most recent IF: 3.241; 2012 IF: 3.141
	Call Number	UA @ lucian @ c:irua:101356			Serial	2488
Permanent link to this record



	Author	Lizin, S.; Leroy, J.; Delvenne, C.; Dijk, M.; De Schepper, E.; Van Passel, S.
	Title	A patent landscape analysis for organic photovoltaic solar cells : identifying the technology's development phase			Type	A1 Journal article
	Year	2013	Publication	Renewable Energy	Abbreviated Journal	Renew Energ
	Volume	57	Issue		Pages	5-11
	Keywords	A1 Journal article; Engineering sciences. Technology; Engineering Management (ENM)
	Abstract	Organic photovoltaics (OPV) have developed into a vast research area. Progress in various directions has made it difficult to monitor the technology's precise development state. We offer a patent landscape analysis over all OPV devices, their substrates and encapsulation materials to provide an overview of patenting activity from a historical, organizational, geographical and technological point of view. Such an exercise is instrumental for private companies and research institutes aiming at both internal or external technology creation. We discuss our findings in the context of the Industrial Life Cycle model and find OPV still residing in the fluid technology development phase. Technology development is still following an exponential growth path, with the majority of patents coming from the Asian continent and in general private companies. For devices, the main technological focus can be traced back to the “H01L-031” international patent classification (IPC) main group. For the queried substrates, the most attention has gone to glass, but paper and textile have drawn significant interest too. Finally, encapsulation is found to be a less mature research field given the smaller number of patent families. The latter shows that the technology has not matured to the level where processing is carried out on a commercial scale. (C) 2013 Elsevier Ltd. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000319025000002	Publication Date	2013-02-13
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0960-1481	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.357	Times cited	18	Open Access
	Notes	; The authors are much obliged to INTERREG for their financial support of the ORGANEXT project (www.organext.org), without which it would have been impossible to conduct this research. ;			Approved	Most recent IF: 4.357; 2013 IF: 3.361
	Call Number	UA @ admin @ c:irua:127551			Serial	6143
Permanent link to this record



	Author	Neira, I.S.; Kolen'ko, Y.V.; Lebedev, O.I.; Van Tendeloo, G.; Gupta, H.S.; Matsushita, N.; Yoshimura, M.; Guitian, F.
	Title	Rational synthesis of a nanocrystalline calcium phosphate cement exhibiting rapid conversion to hydroxyapatite			Type	A1 Journal article
	Year	2009	Publication	Materials science and engineering: part C: biomimetic materials	Abbreviated Journal	Mat Sci Eng C-Mater
	Volume	29	Issue	7	Pages	2124-2132
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The rational synthesis, comprehensive characterization, and mechanical and micromechanical properties of a calcium phosphate cement are presented. Hydroxyapatite cement biomaterial was synthesized from reactive sub-micrometer-sized dicalcium phosphate dihydrate and tetracalcium phosphate via a dissolution-precipitation reaction using water as the liquid phase. As a result nanostructured, Ca-deficient and carbonated B-type hydroxyapatite is formed. The cement shows good processibility, sets in 22 ± 2 min and entirely transforms to the end product after 6 h of setting reaction, one of the highest conversion rates among previously reported for calcium phosphate cements based on dicalcium and tetracalcium phosphates. The combination of all elucidated physical-chemical traits leads to an essential bioactivity and biocompatibility of the cement, as revealed by in vitro acellular simulated body fluid and cell culture studies. The compressive strength of the produced cement biomaterial was established to be 25 ± 3 MPa. Furthermore, nanoindentation tests were performed directly on the cement to probe its local elasticity and plasticity at sub-micrometer/micrometer level. The measured elastic modulus and hardness were established to be Es = 23 ± 3.5 and H = 0.7 ± 0.2 GPa, respectively. These values are in close agreement with those reported in literature for trabecular and cortical bones, reflecting good elastic and plastic coherence between synthesized cement biomaterial and human bones.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lausanne	Editor
	Language		Wos	000270159200008	Publication Date	2009-04-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0928-4931;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.164	Times cited	18	Open Access
	Notes	Esteem 026019			Approved	Most recent IF: 4.164; 2009 IF: NA
	Call Number	UA @ lucian @ c:irua:79312			Serial	2812
Permanent link to this record



	Author	Janssens, K.; van der Snickt, G.; Alfeld, M.; Noble, P.; van Loon, A.; Delaney, J.; Conover, D.; Zeibel, J.; Dik, J.
	Title	Rembrandt's 'Saul and David' (c. 1652) : use of multiple types of smalt evidenced by means of non-destructive imaging			Type	A1 Journal article
	Year	2016	Publication	Microchemical journal	Abbreviated Journal	Microchem J
	Volume	126	Issue		Pages	515-523
	Keywords	A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation)
	Abstract	The painting Saul and David, considered to date from c. 1652 and previously attributed to Rembrandt van Rijn and/or his studio, is a complex work of art that has been recently subjected to intensive investigation and conservation treatment. The goal of the research was to give insight into the painting's physical construction and condition in preparation for conservation treatment. It was also anticipated that analysis would shed light on authenticity questions and Rembrandt's role in the creation of the painting. The painting depicts the Old Testament figures of King Saul and David. At left is Saul, seated, holding a spear and wiping a tear from his eye with a curtain. David kneels before him at the right playing his harp. In the past, the large sections with the life-size figures were cut apart and later reassembled. A third piece of canvas was added to replace a missing piece of canvas above the head of David. As part of the investigation into the authenticity of the curtain area, a number of paint micro samples were examined with LM and SEM-EDX. Given that the earth, smalt and lake pigments used in the painting could not be imaged with traditional imaging techniques, the entire painting was also examined with state of the art non-destructive imaging techniques. Special attention was devoted to the presence of cobalt-containing materials, specifically the blue glass pigment smalt considered characteristic for the late Rembrandt. A combination of quantitative electron microprobe analysis and macroscopic X-ray fluorescence scanning revealed that three types of cobalt-containing materials are present in the painting. The first type is a cobalt drier that was found in the overpaint used to cover up the canvas inset and the joins that were added in the 19th century. The other two Co-containing materials are part of the original paint used by Rembrandt and comprise two varieties of smalt, a K-rich glass pigment that derives its gray-blue color by doping with Co-ions. Smalt paint with a higher Ni content (NiO:CoO ratio of around 1:4) was used to depict the blue stripes in Saul's colorful turban, while smalt with a lower Ni content was employed (NiO:CoO ratio of around 1:5) for the broad expanses of Saul's garments. The presence of two types of smalt not only supports the recent re-attribution of the painting to Rembrandt, but also that the picture was painted in two phases. Saul's dark red garment is painted in a rough, “loose” manner and the now discolored smalt-rich layer was found to have been partially removed during a past restoration treatment/s. In contrast, the blue-green smalt in the turban is much better preserved and provides a colorful accent. While the use of different types of smalt in a Rembrandt painting has been previously identified using quantitative EDX analysis of paint cross-sections, to the best of our knowledge this is the first time such a distinction has been observed in a 17th-century painting using non-destructive imaging techniques. In addition to the XRF-based non-invasive elemental mapping, hyperspectral imaging in the visual to near-infrared (VNIR) region was also carried out. (C) 2016 Elsevier B.V. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000373647500063	Publication Date	2016-01-29
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0026-265x; 0026-265x	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.034	Times cited	18	Open Access
	Notes	; This research is part of the ReVisualising late Rembrandt: Developing and Applying New Imaging Techniques research project, supported by the Science4Arts research program of the Netherlands Organisation for Scientific Research (NWO, The Hague, NL, ReVisRembrandt project) and the National Science Foundation (NSF, Washington DC, USA, award 1041827). We would like to thank colleagues of the Mauritshuis (The Hague, NL) and the Dutch Cultural Heritage Agency (RCE) in Rijswijk, NL for their support and assistance during the scanning of the Saul and David painting. The GOA project “SOLARPAINT” (University of Antwerp) and the Fund Baillet Latour (Brussels, B) are acknowledged for financial support to GvdS and KJ. We also like to acknowledge the help of Eliza Longhini and Stijn Legrand during some of the XRF scanning stages. ;			Approved	Most recent IF: 3.034
	Call Number	UA @ admin @ c:irua:133258			Serial	5813
Permanent link to this record



	Author	Abakumov, A.M.; Rossell, M.D.; Alekseeva, A.M.; Vassiliev, S.Y.; Mudrezova, S.N.; Van Tendeloo, G.; Antipov, E.V.
	Title	Phase transitions in K₃AlF₆			Type	A1 Journal article
	Year	2006	Publication	Journal of solid state chemistry	Abbreviated Journal	J Solid State Chem
	Volume	179	Issue	2	Pages	421-428
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000235282400011	Publication Date	2005-12-06
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-4596;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.299	Times cited	18	Open Access
	Notes				Approved	Most recent IF: 2.299; 2006 IF: 2.107
	Call Number	UA @ lucian @ c:irua:56561			Serial	2597
Permanent link to this record



	Author	Cagno, S.; Cosyns, P.; Izmer, A.; Vanhaecke, F.; Nys, K.; Janssens, K.
	Title	Deeply colored and black-appearing Roman glass : a continued research			Type	A1 Journal article
	Year	2014	Publication	Journal of archaeological science	Abbreviated Journal	J Archaeol Sci
	Volume	42	Issue		Pages	128-139
	Keywords	A1 Journal article; Philosophy; History; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation)
	Abstract	In the context of archaeological and historical assessment of Roman black-appearing glass, the chemical and physical characterization of a large collection of samples originating from various areas of the Roman Empire has been gathered over the past years to (i) verify whether a minor segment of the overall Roman glass production can help in determining possible diachronic changes in Roman imperial glass production (1st century AD – 5th century AD) and (ii) reveal regional compositional differences. In this paper, the latest results on the chemical composition of an additional 44 black-appearing Roman glass samples are presented, together with general conclusions based upon the entire compositional dataset of over 400 analyzed black glass samples. The results show that the Roman black glass is obtained through several glass compositions with a specific chronological, geographical and typological distribution. (C) 2013 Elsevier Ltd. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000332133100011	Publication Date	2013-11-13
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0305-4403	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.602	Times cited	18	Open Access
	Notes	; This research was supported by the Interuniversity Attraction Poles Programme – Belgian Science Policy (IUAP VI/16) and the Hercules fund, Brussels (grant A11/ 0387). The text also presents results of GOA “XANES meets ELNES” (Research Fund University of Antwerp, Belgium), FWO (Brussels, Belgium) projects no. G.0704.08 and G.01769.09, and VUB project OZR-BOF 1247. This work was partly supported by the Research Council of Norway through its Centres of Excellence funding scheme, project number 223268/F50. ;			Approved	Most recent IF: 2.602; 2014 IF: 2.196
	Call Number	UA @ admin @ c:irua:115865			Serial	5567
Permanent link to this record



	Author	Meulebroeck, W.; Cosyns, P.; Baert, K.; Wouters, H.; Cagno, S.; Janssens, K.; Terryn, H.; Nys, K.; Thienpont, H.
	Title	Optical spectroscopy as a rapid and low-cost tool for the first-line analysis of glass artefacts : a step-by-step plan for Roman green glass			Type	A1 Journal article
	Year	2011	Publication	Journal of archaeological science	Abbreviated Journal	J Archaeol Sci
	Volume	38	Issue	9	Pages	2387-2398
	Keywords	A1 Journal article; Engineering sciences. Technology; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation)
	Abstract	Archaeometric research on glass artefacts is continuously evolving and is converging towards a multidisciplinary research domain where different types of techniques are applied depending on the questions asked and the circumstances involved. The technique described in this work is optical spectroscopy. The benefit of this technique being the possibility of building up a knowledge database for a large amount of material in a relatively short period of time and with a relatively limited budget. This is of particular interest for the investigation of extensive and/or unexplored glass collections where a first-line analysis of artefacts could facilitate the selection of material needing further and more detailed examination. This publication explores the extent to which optical spectroscopy can be used for a first-line analysis of green coloured glass artefacts from the Roman period. It is shown that the colour coordinates calculated from the measured transmission spectrum could reveal information about the fragment under study. In particular it is shown that 1) based on the position of the calculated colour values on the colour diagram (CIE1931) one could easily know whether the artefact was coloured using only iron or if copper oxides were also present. In the case of the artefact owing its colour solely to the presence of iron, the distance between the measured colour values and the colour diagrams white point can roughly indicate the iron concentration of the sample; 2) artefacts that were fabricated under similar furnace conditions can also be identified on the colour diagram; 3) samples with identical compositions and fabrication conditions but with different sample thickness, gave rise to a variation in the colour coordinates, thus allowing optical spectroscopy to help identify fragments which might belong to the same object.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000293551200037	Publication Date	2011-05-12
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0305-4403	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.602	Times cited	18	Open Access
	Notes	; The authors would like to express their gratitude to the Vrije Universiteit Brussel for funding this research in the framework of HOA15, a “Horizontal Research Action” which encourages collaboration between research groups from different departments within the same University having expertise in specific research disciplines and also to the OZR-project 1247 BOF. The authors are also very grateful to the following persons for having permitted the study of their material: Rica Annaert and Sofie Vanhoutte of the “Vlaams lnstituut voor Onroerend Erfgoed (VIOE): Grobbendonk, Matagne-la-Petite, Oudenburg; Jean-Louis Antoine of the Musee Archeologique Namur: Nismes; Tom Debruyne of the ”Erfgoedcel“ Tienen: Tienen: Marc Rogge and Kurt Braeckman of the ”Provinciaal Archeologisch Museum (PAM)": Kruishoutem, Velzeke; Walter Sevenants: Rumst and Anne de Pyre-Gysel from the Musee Romain d'Avenches: Avenches. ;			Approved	Most recent IF: 2.602; 2011 IF: 1.914
	Call Number	UA @ admin @ c:irua:92389			Serial	5756
Permanent link to this record



	Author	Deyneko, D.V.; Morozov, V.A.; Hadermann, J.; Savon, A.E.; Spassky, D.A.; Stefanovich, S.Y.; Belik, A.A.; Lazoryak, B.I.
	Title	A novel red Ca_8.5Pb_0.5Eu(PO₄)₇ phosphor for light emitting diodes application			Type	A1 Journal article
	Year	2015	Publication	Journal of alloys and compounds	Abbreviated Journal	J Alloy Compd
	Volume	647	Issue	647	Pages	965-972
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Ca9-xPbxEu(PO4)(7) (0 <= x <= 1) solid solutions with a whitlockite-type (or beta-Ca-3(PO4)(2)-type) structure (sp.gr. R3c) were prepared by a standard solid-state method in air. Their luminescent properties under near-ultraviolet (n-UV) light were investigated. Excitation spectra of Ca9-xPbxEu(PO4)(7) showed the strongest absorption at about 395 nm, which matches well with commercially available n-UV-emitting GaN-based LED chips. Emission spectra indicated an intense red emission due to the D-5(0) -> F-7(2) transition of Eu3+, with a maximum in the intensity for Ca8.5Pb0.5Eu(PO4)(7). The emission intensity of Ca8.5Pb0.5Eu(PO4)(7) was about 1.8 times higher than that of a Ca9Eu(PO4)(7) phosphor. We suggest that the introduction of Pb2+ is an efficient approach to enhance luminescence properties of such phosphors. We clarified the influence of the Ca2+/Pb2+ substitution on intensities of three bands for the D-5(0) -> F-7(0) transition in excitation spectra of Ca9-xPbxEu(PO4)(7). In addition, we found a reversible first-order phase transition from R3c to R (3) over barc symmetry by second-harmonic generation in the range from 753 K (x = 1) to 846 K (x = 0). (C) 2015 Elsevier B.V. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000361156400135	Publication Date	2015-06-18
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0925-8388	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.133	Times cited	18	Open Access
	Notes				Approved	Most recent IF: 3.133; 2015 IF: 2.999
	Call Number	UA @ lucian @ c:irua:128720			Serial	4215
Permanent link to this record



	Author	Douglas, A.; Neethling, J.H.; Santamarta, R.; Schryvers, D.; Cornish, L.A.
	Title	Unexpected ordering behaviour of Pt₃Al intermetallic precipitates			Type	A1 Journal article
	Year	2007	Publication	Journal of alloys and compounds	Abbreviated Journal	J Alloy Compd
	Volume	432	Issue	1/2	Pages	96-102
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000245486300024	Publication Date	2006-07-13
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0925-8388;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.133	Times cited	18	Open Access
	Notes				Approved	Most recent IF: 3.133; 2007 IF: 1.455
	Call Number	UA @ lucian @ c:irua:64279			Serial	3808
Permanent link to this record



	Author	Van Meensel, J.; Lauwers, L.; Van Huylenbroeck, G.; Van Passel, S.
	Title	Comparing frontier methods for economic-environmental trade-off analysis			Type	A1 Journal article
	Year	2010	Publication	European Journal Of Operational Research	Abbreviated Journal	Eur J Oper Res
	Volume	207	Issue	2	Pages	1027-1040
	Keywords	A1 Journal article; Economics
	Abstract	This paper uses a mechanistic frontier approach as a reference to evaluate the ability of conventional parametric (SFA) and non-parametric (DEA) frontier approaches for analyzing economicenvironmental trade-offs. Conventional frontier approaches are environmentally adjusted through incorporating the materials balance principle. The analysis is worked out for the Flemish pig finishing case, which is both representative and didactic. Results show that, on average, SFA and DEA yield adequate economicenvironmental trade-offs. Both methods are good estimators for technical efficiency. Cost allocative and environmental allocative efficiency scores are less robust, due to the well-known methodological advantages and disadvantages of SFA and DEA. For particular firms, SFA, DEA and the mechanistic approach may yield different economicenvironmental trade-offs. One has therefore to be careful when using conventional frontier approaches for firm-specific decision support. The mechanistic approach allows for optimizing performances per average present finisher, which is the production unit in pig finishing. Conventional frontier methods do not allow for this optimization since the number of average present finishers varies along the production functions. Since the mechanistic production function is based on underlying growth, feed uptake and mortality functions, additional firm-specific indicators can also be calculated at each point of the production function.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000281107200045	Publication Date	2010-05-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0377-2217	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.297	Times cited	18	Open Access
	Notes	; This research is funded by the Institute for the Promotion of Innovation by Science and Technology in Flanders (IWT Vlaanderen). ;			Approved	Most recent IF: 3.297; 2010 IF: 2.159
	Call Number	UA @ admin @ c:irua:136761			Serial	6171
Permanent link to this record



	Author	Maes, D.; Van Passel, S.
	Title	Advantages and limitations of exergy indicators to assess sustainability of bioenergy and biobased materials			Type	A1 Journal article
	Year	2014	Publication	Environmental Impact Assessment Review	Abbreviated Journal	Environ Impact Asses
	Volume	45	Issue		Pages	19-29
	Keywords	A1 Journal article; Engineering sciences. Technology; Engineering Management (ENM)
	Abstract	Innovative bioenergy projects show a growing diversity in biomass pathways, transformation technologies and end-products, leading to complex new processes. Existing energy-based indicators are not designed to include multiple impacts and are too constrained to assess the sustainability of these processes. Alternatively, indicators based on exergy, a measure of “qualitative energy”, could allow a more holistic view. Exergy is increasingly applied in analyses of both technical and biological processes. But sustainability assessments including exergy calculations, are not very common and are not generally applicable to all types of impact. Hence it is important to frame the use of exergy for inclusion in a sustainability assessment. This paper reviews the potentials and the limitations of exergy calculations, and presents solutions for coherent aggregation with other metrics. The resulting approach is illustrated in a case study. Within the context of sustainability assessment of bioenergy, exergy is a suitable metric for the impacts that require an ecocentric interpretation, and it allows aggregation on a physical basis. The use of exergy is limited to a measurement of material and energy exchanges with the sun, biosphere and lithosphere. Exchanges involving services or human choices are to be measured in different metrics. This combination provides a more inclusive and objective sustainability assessment, especially compared to standard energy- or carbon-based indicators. Future applications of this approach in different situations are required to clarify the potential of exergy-based indicators in a sustainability context. (C) 2013 Elsevier Inc. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000331924600003	Publication Date	2013-12-05
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0195-9255	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.094	Times cited	18	Open Access
	Notes	; ;			Approved	Most recent IF: 3.094; 2014 IF: 2.400
	Call Number	UA @ admin @ c:irua:127545			Serial	6147
Permanent link to this record



	Author	Ang, F.; Van Passel, S.
	Title	The sustainable value approach : a clarifying and constructive comment			Type	A1 Journal article
	Year	2010	Publication	Ecological Economics	Abbreviated Journal	Ecol Econ
	Volume	69	Issue	12	Pages	2303-2306
	Keywords	A1 Journal article; Economics
	Abstract	Recently, the original benchmarking methodology of the Sustainable Value approach became subjected to serious debate. While Kuosmanen and Kuosmanen (2009b) critically question its validity introducing productive efficiency theory, Figge and Hahn (2009) put forward that the implementation of productive efficiency theory severely conflicts with the original financial economics perspective of the Sustainable Value approach. We argue that the debate is very confusing because the original Sustainable Value approach presents two largely incompatible objectives. Nevertheless, we maintain that both ways of benchmarking could provide useful and moreover complementary insights. If one intends to present the overall resource efficiency of the firm from the investor's viewpoint, we recommend the original benchmarking methodology. If one on the other hand aspires to create a prescriptive tool setting up some sort of reallocation scheme, we advocate implementation of the productive efficiency theory. Although the discussion on benchmark application is certainly substantial, we should avoid the debate to become accordingly narrowed. Next to the benchmark concern, we see several other challenges considering the development of the Sustainable Value approach: (1) a more systematic resource selection, (2) the inclusion of the value chain and (3) additional analyses related to policy in order to increase interpretative power.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000283700900001	Publication Date	2010-07-30
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0921-8009; 1873-6106	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles; WoS full record; WoS citing articles
	Impact Factor	2.965	Times cited	18	Open Access
	Notes	; ;			Approved	Most recent IF: 2.965; 2010 IF: 2.754
	Call Number	UA @ admin @ c:irua:136760			Serial	6258
Permanent link to this record



	Author	Neyts, E.; Tacq, M.; Bogaerts, A.
	Title	Reaction mechanisms of low-kinetic energy hydrocarbon radicals on typical hydrogenated amorphous carbon (a-C:H) sites: a molecular dynamics study			Type	A1 Journal article
	Year	2006	Publication	Diamond and related materials	Abbreviated Journal	Diam Relat Mater
	Volume	15	Issue	10	Pages	1663-1676
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000241224000026	Publication Date	2006-03-08
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0925-9635;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.561	Times cited	18	Open Access
	Notes				Approved	Most recent IF: 2.561; 2006 IF: 1.935
	Call Number	UA @ lucian @ c:irua:59634			Serial	2819
Permanent link to this record



	Author	Dixit, H.; Saniz, R.; Lamoen, D.; Partoens, B.
	Title	Accurate pseudopotential description of the GW bandstructure of ZnO			Type	A1 Journal article
	Year	2011	Publication	Computer physics communications	Abbreviated Journal	Comput Phys Commun
	Volume	182	Issue	9	Pages	2029-2031
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT); Condensed Matter Theory (CMT)
	Abstract	We present the GW band structure of ZnO in its wurtzite (WZ), zincblende (ZB) and rocksalt (RS) phases at the Γ point, calculated within the GW approximation. We have used a Zn20+ pseudopotential which is essential for the adequate treatment of the exchange interaction in the self-energy. The accuracy of the pseudopotential used is also discussed. The effect of the pd hybridization on the GW corrections to the band gap is correlated by comparing the ZB and RS phase.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000292675100062	Publication Date	2011-02-17
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0010-4655;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.936	Times cited	18	Open Access
	Notes	; ;			Approved	Most recent IF: 3.936; 2011 IF: 3.268
	Call Number	UA @ lucian @ c:irua:90761			Serial	51
Permanent link to this record



	Author	Fang, C.M.; van Huis, M.A.; Zandbergen, H.W.
	Title	Stability and structures of the CFCC-TmC phases : a first-principles study			Type	A1 Journal article
	Year	2012	Publication	Computational materials science	Abbreviated Journal	Comp Mater Sci
	Volume	51	Issue	1	Pages	146-150
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The η-M6C, γ-M23C6, and π-M11C2 phases (M = Cr, Mn and Fe) have complex cubic lattices with lattice parameters of approximately 1.0 nm. They belong to the CFCC-TmC family (complex face-centered cubic transition metal carbides), display a rich variety of crystal structures, and play in important role in iron alloys and steels. Here we show that first-principles calculations predict high stability for the γ-M23C6 and η-M6C phases, and instability for the π-M11C2 phases, taking into account various compositional and structural possibilities. The calculations also show a wide variety in magnetic properties. The Cr-containing phases were found to be non-magnetic and the Fe-phases to be ferromagnetic, while the Mn-containing phases were found to be either ferrimagnetic or non-magnetic. Details of the local atomic structures, and the formation and stability of these precipitates in alloys are discussed.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000296214300020	Publication Date	2011-08-29
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0927-0256;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.292	Times cited	18	Open Access
	Notes				Approved	Most recent IF: 2.292; 2012 IF: 1.878
	Call Number	UA @ lucian @ c:irua:93277			Serial	3119
Permanent link to this record



	Author	Krekels, T.; Milat, O.; Van Tendeloo, G.; van Landuyt, J.; Amelinckx, S.; Slater, P.R.; Greaves, C.
	Title	SO₄-chain formation and ordering in [YSrCa]Sr₂Cu_2.78(SO₄)_0.22O_7-\delta			Type	A1 Journal article
	Year	1993	Publication	Physica: C : superconductivity	Abbreviated Journal	Physica C
	Volume	210	Issue	3-4	Pages	439-446
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	YBCO-based materials containing SO4-tetrahedra centered on the Cu(1)-sites of the CuO-chain plane have been examined by means of electron diffraction and high resolution electron microscopy. An incommensurate modulation is observed and attributed to the ordering of b-oriented SO4-rich chains in the Cu(1)-S-O-layer, described in terms of an SO4-concentration wave.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	A1993LG46100018	Publication Date	2002-10-17
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0921-4534;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	0.942	Times cited	18	Open Access
	Notes				Approved	PHYSICS, APPLIED 47/145 Q2 #
	Call Number	UA @ lucian @ c:irua:102977			Serial	3557
Permanent link to this record



	Author	Martin, J.M.L.; Francois; Gijbels, R.
	Title	The anharmonic-force field of thioformaldehyde, h2cs, by ab-initio methods			Type	A1 Journal article
	Year	1994	Publication	Journal of molecular spectroscopy	Abbreviated Journal	J Mol Spectrosc
	Volume	168	Issue	2	Pages	363-373
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	The quartic force field of thioformaldehyde has been calculated ab initio using large basis sets and augmented coupled cluster methods. Calculated fundamentals are in excellent agreement with experiment, as is the most important Coriolis coupling constant. Computed values for the anharmonicity, rovibrational coupling, and centrifugal distortion constants of the four isotopomers (H2CS)-S-32, (H2CS)-S-34, (HDCS)-S-32, and (D2CS)-S-32 have been reported. Predictions have been made for all vibrational transitions from the ground state to excited states with at most two quanta for these isotopomers, both using second-order perturbation theory corrected for Darling-Dennison resonance and using vibrational SCF-CI calculations. For (D2CS)-S-32, perturbation theory performs quite well; for the other isotopomers, performance is poorer for states involving excitation of the out-of-plane bend and, for the (H2CS)-S-32 and (H2CS)-S-34 isotopomers, also for the antisymmetric bend that is in severe Coriolis resonance with it. A possible explanation has been suggested. (C) 1994 Academic Press, Inc.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York, N.Y.	Editor
	Language		Wos	A1994PU60800015	Publication Date	2002-10-07
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-2852;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.482	Times cited	18	Open Access
	Notes				Approved	PHYSICS, APPLIED 47/145 Q2 #
	Call Number	UA @ lucian @ c:irua:95414			Serial	3570
Permanent link to this record



	Author	Bogaerts, A.; Bultinck, E.; Eckert, M.; Georgieva, V.; Mao, M.; Neyts, E.; Schwaederlé, L.
	Title	Computer modeling of plasmas and plasma-surface interactions			Type	A1 Journal article
	Year	2009	Publication	Plasma processes and polymers	Abbreviated Journal	Plasma Process Polym
	Volume	6	Issue	5	Pages	295-307
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	In this paper, an overview is given of different modeling approaches used for describing gas discharge plasmas, as well as plasma-surface interactions. A fluid model is illustrated for describing the detailed plasma chemistry in capacitively coupled rf discharges. The strengths and limitations of Monte Carlo simulations and of a particle-in-cell-Monte Carlo collisions model are explained for a magnetron discharge, whereas the capabilities of a hybrid Monte Carlo-fluid approach are illustrated for a direct current glow discharge used for spectrochemical analysis of materials. Finally, some examples of molecular dynamics simulations, for the purpose of plasma-deposition, are given.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Weinheim	Editor
	Language		Wos	000266471800003	Publication Date	2009-04-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1612-8850;1612-8869;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.846	Times cited	18	Open Access
	Notes				Approved	Most recent IF: 2.846; 2009 IF: 4.037
	Call Number	UA @ lucian @ c:irua:76833			Serial	461
Permanent link to this record



	Author	Carraro, G.; Maccato, C.; Bontempi, E.; Gasparotto, A.; Lebedev, O.I.; Turner, S.; Depero, L.E.; Van Tendeloo, G.; Barreca, D.
	Title	Insights on growth and nanoscopic investigation of uncommon iron oxide polymorphs			Type	A1 Journal article
	Year	2013	Publication	European journal of inorganic chemistry	Abbreviated Journal	Eur J Inorg Chem
	Volume		Issue	31	Pages	5454-5461
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Si(100)-supported Fe2O3 nanomaterials were developed by a chemical vapor deposition (CVD) approach. The syntheses, which were performed at temperatures between 400 and 550 °C, selectively yielded the scarcely studied β- and ϵ-Fe2O3 polymorphs under O2 or O2 + H2O reaction environments, respectively. Correspondingly, the observed morphology underwent a progressive evolution from interconnected nanopyramids to vertically aligned nanorods. The present study aims to provide novel insights into Fe2O3 nano-organization by a systematic investigation of the system structure/morphology and of their interrelations with growth conditions. In particular, for the first time, the β- and ϵ-Fe2O3 preparation process has been accompanied by a thorough multitechnique investigation, which, beyond X-ray photoelectron spectroscopy (XPS) and field-emission scanning electron microscopy (FESEM), is carried out by X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDXS), atomic force microscopy (AFM), high-resolution transmission electron microscopy (HRTEM), electron diffraction (ED), scanning TEM electron energy-loss spectroscopy (STEM-EELS), and high-angle annular dark-field STEM (HAADF-STEM). Remarkably, the target materials showed a high structural and compositional homogeneity throughout the whole thickness of the nanodeposit. In particular, spatially resolved EELS chemical maps through the spectrum imaging (SI) technique enabled us to gain important information on the local Fe coordination, which is of crucial importance in determining the system reactivity. The described preparation method is in fact a powerful tool to simultaneously tailor phase composition and morphology of iron(III) oxide nanomaterials, the potential applications of which include photocatalysis, magnetic devices, gas sensors, and anodes for Li-ion batteries.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Weinheim	Editor
	Language		Wos	000330567000009	Publication Date	2013-10-08
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1434-1948;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.444	Times cited	18	Open Access
	Notes	Fwo; Countatoms			Approved	Most recent IF: 2.444; 2013 IF: 2.965
	Call Number	UA @ lucian @ c:irua:110946			Serial	1676
Permanent link to this record



	Author	Van Dael, M.; Marquez, N.; Reumerman, P.; Pelkmans, L.; Kuppens, T.; Van Passel, S.
	Title	Development and techno-economic evaluation of a biorefinery based on biomass (waste) streams : case study in the Netherlands			Type	A1 Journal article
	Year	2014	Publication	Biofuels Bioproducts & Biorefining-Biofpr	Abbreviated Journal	Biofuel Bioprod Bior
	Volume	8	Issue	5	Pages	635-644
	Keywords	A1 Journal article; Engineering sciences. Technology; Engineering Management (ENM)
	Abstract	In this paper, the technical and economic advantages of combining conversion technologies into a multi-dimensional plant primarily using regional biomass residues are investigated. The main objective is to show how locally available biomass can be used more efficiently as a source for renewable energy and bio-based products. Therefore, not only is the theoretical perspective considered, but also a reality check for the local situation is taken into account. Although industrial attitude toward biorefineries is positive, the efficient production of a portfolio of bio-based products has not yet been implemented. A biorefinery concept for Moerdijk (the Netherlands) was developed, focusing on grass refining, production of pyrolysis oil, biodiesel production, and bio-LNG production. Grass refining is the most experimental technique of all proposed conversion techniques. In terms of development, pyrolysis oil and bio-LNG production are in the demonstration phase. Anaerobic digestion and biodiesel production are proven techniques. It is shown that this concept allows for synergies with regard to the utilization of residue flows from internal processes. Furthermore, it is demonstrated that by integrating different conversion technologies, an economically feasible concept can be developed in which technologies, currently residing in a demonstration phase, can also be brought to the market. (c) 2013 Society of Chemical Industry and John Wiley & Sons, Ltd
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000342662200015	Publication Date	2013-11-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1932-104x	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.694	Times cited	18	Open Access
	Notes	; We would like to thank the editor and the anonymous referees for their helpful suggestions and insightful comments that have significantly improved the paper. The Energy Conversion Parks (ECP) project is funded by the Interreg IVa – Flanders-Netherlands program from the European Fund for Regional Development that stimulates cross-border projects. Also the Dutch Ministry of Economic Affairs, the Flemish Government, the Provinces of Noord-Brabant (NL), Zeeland (NL), Limburg (BE) and the partners (VITO, Avans University of Applied Sciences, Wageningen University and Research, Hasselt University, and Zeeland University of Applied Sciences) themselves are co-financing the project. We also would like to express our gratitude toward the organization of the 2nd Iberoamerican Congress on Biorefineries in Jaen (Spain) for giving us the opportunity to present and thereby fine-tune our work. ;			Approved	Most recent IF: 3.694; 2014 IF: 4.214
	Call Number	UA @ admin @ c:irua:127541			Serial	6180
Permanent link to this record



	Author	Takeda, M.; Suzuki, N.; Shinohara, G.; Endo, T.; van Landuyt, J.
	Title	TEM study on precipitation behavior in Cu-Co alloys			Type	A1 Journal article
	Year	1998	Publication	Physica status solidi: A: applied research	Abbreviated Journal	Phys Status Solidi A
	Volume	168	Issue		Pages	27-35
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Berlin	Editor
	Language		Wos	000075226500005	Publication Date	2002-09-10
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0031-8965;1521-396X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor		Times cited	18	Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:29677			Serial	3494
Permanent link to this record



	Author	Martin, J.M.L.; François, J.P.; Gijbels, R.
	Title	The anharmonic force field of thioformaldehyde, H₂CS			Type	A1 Journal article
	Year	1994	Publication	Journal of molecular spectroscopy	Abbreviated Journal	J Mol Spectrosc
	Volume	168	Issue		Pages	363-373
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York, N.Y.	Editor
	Language		Wos	A1994PU60800015	Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0022-2852	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.482	Times cited	18	Open Access
	Notes				Approved	no
	Call Number	UA @ lucian @ c:irua:10259			Serial	119
Permanent link to this record



	Author	Lubk, A.; Javon, E.; Cherkashin, N.; Reboh, S.; Gatel, C.; Hytch, M.
	Title	Dynamic scattering theory for dark-field electron holography of 3D strain fields			Type	A1 Journal article
	Year	2014	Publication	Ultramicroscopy	Abbreviated Journal	Ultramicroscopy
	Volume	136	Issue		Pages	42-49
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Dark-held electron holography maps strain in crystal lattices into reconstructed phases over large fields of view. Here we investigate the details of the lattice strain-reconstructed phase relationship by applying dynamic scattering theory both analytically and numerically. We develop efficient analytic linear projection rules for 3D strain fields, facilitating a straight-forward calculation of reconstructed phases from 3D strained materials. They are used in the following to quantify the influence of various experimental parameters like strain magnitude, specimen thickness, excitation error and surface relaxation. (C) 2013 Elsevier B.V. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000327884700006	Publication Date	2013-07-29
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0304-3991;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.843	Times cited	18	Open Access
	Notes	European Union under the Seventh Framework Program under a contract for an Integrated Infrastructure Initiative (Reference312483 – ESTEEM2); esteem2_jra4			Approved	Most recent IF: 2.843; 2014 IF: 2.436
	Call Number	UA @ lucian @ c:irua:112836			Serial	766
Permanent link to this record



	Author	Chen, B.; Gauquelin, N.; Jannis, D.; Cunha, D.M.; Halisdemir, U.; Piamonteze, C.; Lee, J.H.; Belhadi, J.; Eltes, F.; Abel, S.; Jovanovic, Z.; Spreitzer, M.; Fompeyrine, J.; Verbeeck, J.; Bibes, M.; Huijben, M.; Rijnders, G.; Koster, G.
	Title	Strain-engineered metal-to-insulator transition and orbital polarization in nickelate superlattices integrated on silicon			Type	A1 Journal article
	Year	2020	Publication	Advanced Materials	Abbreviated Journal	Adv Mater
	Volume		Issue		Pages	2004995
	Keywords	A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
	Abstract	Epitaxial growth of SrTiO3 (STO) on silicon greatly accelerates the monolithic integration of multifunctional oxides into the mainstream semiconductor electronics. However, oxide superlattices (SLs), the birthplace of many exciting discoveries, remain largely unexplored on silicon. In this work, LaNiO3/LaFeO3 SLs are synthesized on STO-buffered silicon (Si/STO) and STO single-crystal substrates, and their electronic properties are compared using dc transport and X-ray absorption spectroscopy. Both sets of SLs show a similar thickness-driven metal-to-insulator transition, albeit with resistivity and transition temperature modified by the different amounts of strain. In particular, the large tensile strain promotes a pronounced Ni 3dx2-y2 orbital polarization for the SL grown on Si/STO, comparable to that reported for LaNiO3 SL epitaxially strained to DyScO3 substrate. Those results illustrate the ability to integrate oxide SLs on silicon with structure and property approaching their counterparts grown on STO single crystal, and also open up new prospects of strain engineering in functional oxides based on the Si platform.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000588146500001	Publication Date	2020-11-11
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0935-9648	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	29.4	Times cited	18	Open Access	OpenAccess
	Notes	; This work is supported by the international M-ERA.NET project SIOX (project 4288) and H2020 project ULPEC (project 732642). M.S. acknowledges funding from Slovenian Research Agency (Grants No. J2-9237 and No. P2-0091). This work received support from the ERC CoG MINT (#615759) and from a PHC Van Gogh grant. M.B. thanks the French Academy of Science and the Royal Netherlands Academy of Arts and Sciences for supporting his stays in the Netherlands. This project has received funding as a transnational access project from the European Union's Horizon 2020 research and innovation programme under grant agreement No 823717 – ESTEEM3. N.G. and J.V. acknowledge GOA project “Solarpaint” of the University of Antwerp. ; esteem3TA; esteem3reported			Approved	Most recent IF: 29.4; 2020 IF: 19.791
	Call Number	UA @ admin @ c:irua:173516			Serial	6617
Permanent link to this record



	Author	Yusupov, M.; Neyts, E.C.; Verlackt, C.C.; Khalilov, U.; van Duin, A.C.T.; Bogaerts, A.
	Title	Inactivation of the endotoxic biomolecule lipid A by oxygen plasma species : a reactive molecular dynamics study			Type	A1 Journal article
	Year	2015	Publication	Plasma processes and polymers	Abbreviated Journal	Plasma Process Polym
	Volume	12	Issue	12	Pages	162-171
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Reactive molecular dynamics simulations are performed to study the interaction of reactive oxygen species, such as OH, HO2 and H2O2, with the endotoxic biomolecule lipid A of the gram-negative bacterium Escherichia coli. It is found that the aforementioned plasma species can destroy the lipid A, which consequently results in reducing its toxic activity. All bond dissociation events are initiated by hydrogen-abstraction reactions. However, the mechanisms behind these dissociations are dependent on the impinging plasma species, i.e. a clear difference is observed in the mechanisms upon impact of HO2 radicals and H2O2 molecules on one hand and OH radicals on the other hand. Our simulation results are in good agreement with experimental observations.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Weinheim	Editor
	Language		Wos	000350275400005	Publication Date	2014-09-17
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1612-8850;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.846	Times cited	18	Open Access
	Notes				Approved	Most recent IF: 2.846; 2015 IF: 2.453
	Call Number	c:irua:123540			Serial	1589
Permanent link to this record



	Author	Brault, P.; Neyts, E.C.
	Title	Molecular dynamics simulations of supported metal nanocatalyst formation by plasma sputtering			Type	A1 Journal article
	Year	2015	Publication	Catalysis today	Abbreviated Journal	Catal Today
	Volume	256	Issue	256	Pages	3-12
	Keywords	A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
	Abstract	Magnetron sputtering is a widely used physical vapor deposition technique for deposition and formation of nanocatalyst thin films and clusters. Nevertheless, so far only few studies investigated this formation process at the fundamental level. We here review atomic scale molecular dynamics simulations aimed at elucidating the nanocatalyst growth process through magnetron sputtering. We first introduce the basic magnetron sputtering background and machinery of molecular dynamics simulations, and then describe the studies conducted in this field so far. We also present a perspective view on how the field may be developed further.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000360085300002	Publication Date	2015-02-28
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0920-5861;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.636	Times cited	18	Open Access
	Notes				Approved	Most recent IF: 4.636; 2015 IF: 3.893
	Call Number	c:irua:127408			Serial	2174
Permanent link to this record



	Author	Alvarez-Martin, A.; Trashin, S.; Cuykx, M.; Covaci, A.; De Wael, K.; Janssens, K.
	Title	Photodegradation mechanisms and kinetics of Eosin-Y in oxic and anoxic conditions			Type	A1 Journal article
	Year	2017	Publication	Dyes and pigments	Abbreviated Journal	Dyes Pigments
	Volume	145	Issue		Pages	376-384
	Keywords	A1 Journal article; Pharmacology. Therapy; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation); Toxicological Centre
	Abstract	Lakes based on Eosin-Y are extensively used by 19th century artists. Unfortunately, the identification of these pigments in paintings is a difficult task because Eosin-Y degrades very fast under the influence of light. The characterization of the (photo)degradation products of Eosin-Y can be very useful for the identification of these pigments in historic works of art and related cultural heritage artifacts. Furthermore, knowledge on how different factors influence the discoloration process (e.g. different types of irradiation sources and presence/absence of oxygen) is a valuable tool for preventive conservation. To this aim we performed a study on the photodegradation of Eosin-Y in solution under different illumination and in both oxic and anoxic conditions. The photodegradation of Eosin-Y was monitored by UV-VIS spectrophotometry, LC-QTOFMS and electrochemistry techniques. Results indicated higher degradation rates, by a factor of 20 or higher, under illumination with wavelengths near to the main absorbance band of the red pigment. Two different degradation pathways are observed under the conditions studied. LC-QTOFMS and electrochemistry suggested that in the presence of oxygen the degradation mechanism is an oxidative process where the breakdown of the structure causes the total discoloration. Meanwhile under anoxic conditions, a debromination process takes place while the chromophore, and consequently the color of the molecule in solution, remains essentially intact.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000405972900046	Publication Date	2017-06-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0143-7208	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.473	Times cited	18	Open Access
	Notes	; ;			Approved	Most recent IF: 3.473
	Call Number	UA @ admin @ c:irua:144385			Serial	5770
Permanent link to this record



	Author	Srivastava, A.; Van Passel, S.; Laes, E.
	Title	Assessing the success of electricity demand response programs : a meta-analysis			Type	A1 Journal article
	Year	2018	Publication	Energy Research and Social Science	Abbreviated Journal
	Volume	40	Issue	40	Pages	110-117
	Keywords	A1 Journal article; Economics; Engineering Management (ENM)
	Abstract	This paper conducts a meta-analysis of 32 electricity demand response programs in the residential sector to understand whether their success is dependent on specific characteristics. The paper analyses several regression models using various combinations of variables that capture the designs of the programs and the socio-economic conditions in which the programs are implemented. The analysis reveals that demand response programs are more likely to succeed in highly urbanized areas, in areas where economic growth rates are high, and in areas where the renewable energy policy is favorable. These findings provide useful guidance in determining where and how to implement future demand response programs.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000430737800014	Publication Date	2017-12-28
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2214-6296	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles; WoS full record; WoS citing articles
	Impact Factor		Times cited	18	Open Access
	Notes	; ;			Approved	Most recent IF: NA
	Call Number	UA @ admin @ c:irua:149027			Serial	6154
Permanent link to this record



	Author	Velazco, A.; Béché, A.; Jannis, D.; Verbeeck, J.
	Title	Reducing electron beam damage through alternative STEM scanning strategies, Part I: Experimental findings			Type	A1 Journal article
	Year	2022	Publication	Ultramicroscopy	Abbreviated Journal	Ultramicroscopy
	Volume	232	Issue		Pages	113398
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The highly energetic electrons in a transmission electron microscope (TEM) can alter or even completely destroy the structure of samples before sufficient information can be obtained. This is especially problematic in the case of zeolites, organic and biological materials. As this effect depends on both the electron beam and the sample and can involve multiple damage pathways, its study remained difficult and is plagued with irreproducibility issues, circumstantial evidence, rumors, and a general lack of solid data. Here we take on the experimental challenge to investigate the role of the STEM scan pattern on the damage behavior of a commercially available zeolite sample with the clear aim to make our observations as reproducible as possible. We make use of a freely programmable scan engine that gives full control over the tempospatial distribution of the electron probe on the sample and we use its flexibility to obtain multiple repeated experiments under identical conditions comparing the difference in beam damage between a conventional raster scan pattern and a newly proposed interleaved scan pattern that provides exactly the same dose and dose rate and visits exactly the same scan points. We observe a significant difference in beam damage for both patterns with up to 11 % reduction in damage (measured from mass loss). These observations demonstrate without doubt that electron dose, dose rate and acceleration voltage are not the only parameters affecting beam damage in (S)TEM experiments and invite the community to rethink beam damage as an unavoidable consequence of applied electron dose.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000714819200002	Publication Date	2021-10-02
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0304-3991	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.2	Times cited	18	Open Access	OpenAccess
	Notes	A.V., D.J., A.B. and J.V. acknowledge funding from FWO project G093417N (’Compressed sensing enabling low dose imaging in transmission electron microscopy’) and G042920N (’Coincident event detection for advanced spectroscopy in transmission electron microscopy’). This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 823717 ESTEEM3. The Qu-Ant-EM microscope was partly funded by the Hercules fund from the Flemish Government. J.V. acknowledges funding from GOA project “Solarpaint” of the University of Antwerp.; JRA; reported			Approved	Most recent IF: 2.2
	Call Number	EMAT @ emat @c:irua:183282			Serial	6818
Permanent link to this record



	Author	Wang, Y.; Sentosun, K.; Li, A.; Coronado-Puchau, M.; Sánchez-Iglesias, A.; Li, S.; Su, X.; Bals, S.; Liz-Marzán, L.M.
	Title	Engineering Structural Diversity in Gold Nanocrystals by Ligand-Mediated Interface Control			Type	A1 Journal article
	Year	2015	Publication	Chemistry of materials	Abbreviated Journal	Chem Mater
	Volume	27	Issue	27	Pages	8032-8040
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Surface and interface control is fundamentally important for crystal growth engineering, catalysis, surface enhanced spectroscopies, and self-assembly, among other processes and applications. Understanding the role of ligands in regulating surface properties of plasmonic metal nanocrystals during growth has received considerable attention. However, the underlying mechanisms and the diverse functionalities of ligands are yet to be fully addressed. In this contribution, we report a systematic study of ligand-mediated interface control in seeded growth of gold nanocrystals, leading to diverse and exotic nanostructures with an improved surface enhanced Raman scattering (SERS) activity. Three dimensional transmission electron microscopy (3D TEM) revealed an intriguing gold shell growth process mediated by the bifunctional ligand 1,4-benzenedithiol (BDT), which leads to a unique crystal growth mechanism as compared to other ligands, and subsequently to the concept of interfacial energy control mechanism. Volmer-Weber growth mode was proposed to be responsible for BDT-mediated seeded growth, favoring the strongest interfacial energy and generating an asymmetric island growth pathway with internal crevices/gaps. This additionally favors incorporation of BDT at the plasmonic nanogaps, thereby generating strong SERS activity with a maximum efficiency for a core-semishell configuration obtained along seeded growth. Numerical modeling was used to explain this observation. Interestingly, the same strategy can be used to engineer the structural diversity of this system, by using gold nanoparticle seeds with various sizes and shapes, and varying the [Au3+]/[Au0] ratio. This rendered a series of diverse and exotic plasmonic nanohybrids such as semishell-coated gold nanorods, with embedded Raman-active tags and Janus surface with distinct surface functionalities. These would greatly enrich the plasmonic nanostructure toolbox for various studies and applications such as anisotropic nanocrystal engineering, SERS, and high-resolution Raman bioimaging or nanoantenna devices.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000366223200023	Publication Date	2015-10-09
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0897-4756;1520-5002;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	9.466	Times cited	18	Open Access	OpenAccess
	Notes	The authors thank Bart Goris for his help with electron tomography. This work was funded by the European Commission (Grant #310445-2, SAVVY). The authors acknowledge financial support from European Research Council (ERC Advanced Grant # 267867- PLASMAQUO, ERC Starting Grant #335078-COLOURATOMS). The authors also appreciate financial support from the European Union under the Seventh Framework Program (Integrated Infrastructure Initiative N. 262348 European Soft Matter Infrastructure, ESMI). Wang Y. and Su X. would like to acknowledge the Agency for Science, Technology and Research (A*STAR), Singapore, for the financial support under the Grant JCO 14302FG096. M. C.-P. acknowledges an FPU scholarship from the Spanish Ministry of Education, Culture and Sports.; ECAS_Sara; (ROMEO:white; preprint:; postprint:restricted 12 months embargo; pdfversion:cannot);			Approved	Most recent IF: 9.466; 2015 IF: 8.354
	Call Number	c:irua:129598 c:irua:129598			Serial	3972
Permanent link to this record