Home | << 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 >> [101–200] |
Records | |||||
---|---|---|---|---|---|
Author | Batenburg, K.J.; Bals, S.; Sijbers, J.; Kübel, C.; Midgley, P.A.; Hernandez, J.C.; Kaiser, U.; Encina, E.R.; Coronado, E.A.; Van Tendeloo, G. | ||||
Title | 3D imaging of nanomaterials by discrete tomography | Type | A1 Journal article | ||
Year | 2009 | Publication | Ultramicroscopy | Abbreviated Journal | Ultramicroscopy |
Volume | 109 | Issue | 6 | Pages | 730-740 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab | ||||
Abstract | The field of discrete tomography focuses on the reconstruction of samples that consist of only a few different materials. Ideally, a three-dimensional (3D) reconstruction of such a sample should contain only one grey level for each of the compositions in the sample. By exploiting this property in the reconstruction algorithm, either the quality of the reconstruction can be improved significantly, or the number of required projection images can be reduced. The discrete reconstruction typically contains fewer artifacts and does not have to be segmented, as it already contains one grey level for each composition. Recently, a new algorithm, called discrete algebraic reconstruction technique (DART), has been proposed that can be used effectively on experimental electron tomography datasets. In this paper, we propose discrete tomography as a general reconstruction method for electron tomography in materials science. We describe the basic principles of DART and show that it can be applied successfully to three different types of samples, consisting of embedded ErSi2 nanocrystals, a carbon nanotube grown from a catalyst particle and a single gold nanoparticle, respectively. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Amsterdam | Editor | ||
Language | Wos | 000265816400005 | Publication Date | 2009-02-01 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0304-3991; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 2.843 | Times cited | 220 | Open Access | |
Notes | Fwo; Esteem 026019 | Approved | Most recent IF: 2.843; 2009 IF: 2.067 | ||
Call Number | UA @ lucian @ c:irua:74665 c:irua:74665 | Serial | 12 | ||
Permanent link to this record | |||||
Author | Ren, X.-N.; Wu, L.; Jin, J.; Liu, J.; Hu, Z.-Y.; Li, Y.; Hasan, T.; Yang, X.-Y.; Van Tendeloo, G.; Su, B.-L. | ||||
Title | 3D interconnected hierarchically macro-mesoporous TiO2networks optimized by biomolecular self-assembly for high performance lithium ion batteries | Type | A1 Journal article | ||
Year | 2016 | Publication | RSC advances | Abbreviated Journal | Rsc Adv |
Volume | 6 | Issue | 6 | Pages | 26856-26862 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | Biomolecular self-assembly is an effective synthesis strategy for materials fabrication with unique structural complexity and properties. For the first time, we intergrate inner-particle mesoporosity in a three-dimensional (3D) interconnected macroporous TiO2 structure via the mediation of biomolecular self-assembly of the lipids and proteins from rape pollen coats and P123 to optimize the structure for high performance lithium storage. Benefitting from the hierarchically 3D interconnected macro-mesoporous structure with high surface area, small nanocrystallites and good electrolyte permeation, such unique porous structure demonstrates superior electrochemical performance, with high initial coulombic efficiency (94.4% at 1C) and a reversible discharge capacity of 161, 145, 127 and 97 mA h g-1 at 2, 5, 10 and 20C for 1000 cycles, with 79.3%, 89.9%, 90.1% and 87.4% capacity retention, respectively. Using SEM, TEM and HRTEM observations on the TiO2 materials before and after cycling, we verify that the inner-particle mesoporosity and the Li2Ti2O4 nanocrystallites formed during the cycling process in interconnected macroporous structure largely enhance the cycle life and rate performance. Our demonstration here offers opportunities towards developing and optimizing hierarchically porous structures for energy storage applications via biomolecular self-assembly. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000372253700043 | Publication Date | 2016-03-07 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 2046-2069 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 3.108 | Times cited | 16 | Open Access | |
Notes | G. Van Tendeloo and Z. Y. Hu acknowledge support from the EC Framework 7 program ESTEEM2 (Reference 312483).; esteem2_jra4 | Approved | Most recent IF: 3.108 | ||
Call Number | c:irua:131915 c:irua:131915 c:irua:131915 | Serial | 4022 | ||
Permanent link to this record | |||||
Author | Wolf, D.; Rodriguez, L.A.; Béché, A.; Javon, E.; Serrano, L.; Magen, C.; Gatel, C.; Lubk, A.; Lichte, H.; Bals, S.; Van Tendeloo, G.; Fernández-Pacheco, A.; De Teresa, J.M.; Snoeck, E. | ||||
Title | 3D Magnetic Induction Maps of Nanoscale Materials Revealed by Electron Holographic Tomography | Type | A1 Journal article | ||
Year | 2015 | Publication | Chemistry of materials | Abbreviated Journal | Chem Mater |
Volume | 27 | Issue | 27 | Pages | 6771-6778 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | The investigation of three-dimensional (3D) ferromagnetic nanoscale materials constitutes one of the key research areas of the current magnetism roadmap, and carries great potential to impact areas such as data storage, sensing and biomagnetism. The properties of such nanostructures are closely connected with their 3D magnetic nanostructure, making their determination highly valuable. Up to now, quantitative 3D maps providing both the internal magnetic and electric configuration of the same specimen with high spatial resolution are missing. Here, we demonstrate the quantitative 3D reconstruction of the dominant axial component of the magnetic induction and electrostatic potential within a cobalt nanowire (NW) of 100 nm in diameter with spatial resolution below 10 nanometers by applying electron holographic tomography. The tomogram was obtained using a dedicated TEM sample holder for acquisition, in combination with advanced alignment and tomographic reconstruction routines. The powerful approach presented here is widely applicable to a broad range of 3D magnetic nanostructures and may trigger the progress of novel spintronic non-planar nanodevices. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000362920700037 | Publication Date | 2015-09-08 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0897-4756;1520-5002; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 9.466 | Times cited | 50 | Open Access | OpenAccess |
Notes | This work was supported by the European Union under the Seventh Framework Program under a contract for an Inte-grated Infrastructure Initiative Reference 312483-ESTEEM2. S.B. and A.B. gratefully acknowledge funding by ERC Starting grants number 335078 COLOURATOMS and number 278510 VORTEX. AF-P acknowledges an EPSRC Early Career fellowship and support from the Winton Foundation. E.S., C.G. and L.A. R. acknowledge the French ANR program for support though the project EMMA.; esteem2jra4; ECASJO;; ECAS_Sara; (ROMEO:white; preprint:; postprint:restricted 12 months embargo; pdfversion:cannot); | Approved | Most recent IF: 9.466; 2015 IF: 8.354 | ||
Call Number | c:irua:129180 c:irua:129180 c:irua:129180 | Serial | 3950 | ||
Permanent link to this record | |||||
Author | Wang, J.; Zhang, K.; Bogaerts, A.; Meynen, V. | ||||
Title | 3D porous catalysts for plasma-catalytic dry reforming of methane : how does the pore size affect the plasma-catalytic performance? | Type | A1 Journal article | ||
Year | 2023 | Publication | Chemical engineering journal | Abbreviated Journal | |
Volume | 464 | Issue | Pages | 142574-12 | |
Keywords | A1 Journal article; Laboratory of adsorption and catalysis (LADCA); Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
Abstract | The effect of pore size on plasma catalysis is crucial but still unclear. Studies have shown plasma cannot enter micropores and mesopores, so catalysts for traditional thermocatalysis may not fit plasma catalysis. Here, 3D porous Cu and CuO with different pore sizes were prepared using uniform silica particles (10–2000 nm) as templates, and compared in plasma-catalytic dry reforming. In most cases, the smaller the pore size, the higher the conversion of CH4 and CO2. Large pores reachable by more electrons did not improve the reaction efficiency. We attribute this to the small surface area and large crystallite size, as indicated by N2-sorption, mercury intrusion and XRD. While the smaller pores might not be reachable by electrons, due to the sheath formed in front of them, as predicted by modeling, they can still be reached by radicals formed in the plasma, and ions can even be attracted into these pores. An exception are the samples synthesized from 1 μm silica, which show better performance. We believe this is due to the electric field enhancement for pore sizes close to the Debye length. The performances of CuO and Cu with different pore sizes can provide references for future research on oxide supports and metal components of plasma catalysts. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000966076400001 | Publication Date | 2023-03-21 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1385-8947; 1873-3212 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 15.1 | Times cited | Open Access | OpenAccess | |
Notes | Approved | Most recent IF: 15.1; 2023 IF: 6.216 | |||
Call Number | UA @ admin @ c:irua:194862 | Serial | 7262 | ||
Permanent link to this record | |||||
Author | Pulinthanathu Sree, S.; Dendooven, J.; Geerts, L.; Ramachandran, R.K.; Javon, E.; Ceyssens, F.; Breynaert, E.; Kirschhock, C.E.A.; Puers, R.; Altantzis, T.; Van Tendeloo, G.; Bals, S.; Detavernier, C.; Martens, J.A. | ||||
Title | 3D porous nanostructured platinum prepared using atomic layer deposition | Type | A1 Journal article | ||
Year | 2017 | Publication | Journal of materials chemistry A : materials for energy and sustainability | Abbreviated Journal | J Mater Chem A |
Volume | 5 | Issue | 5 | Pages | 19007-19016 |
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | A robust and easy to handle 3D porous platinum structure was created via replicating the 3D channel system of an ordered mesoporous silica material using atomic layer deposition (ALD) over micrometer distances. After ALD of Pt in the silica material, the host template was digested using hydrogen fluoride (HF). A fully connected ordered Pt nanostructure was obtained with morphology and sizes corresponding to that of the pores of the host matrix, as revealed with high-resolution scanning transmission electron microscopy and electron tomography. The Pt nanostructure consisted of hexagonal Pt rods originating from the straight mesopores (11 nm) of the host structure and linking features resulting from Pt replication of the interconnecting mesopore segments (2–4 nm) present in the silica host structure. Electron tomography of partial replicas, made by incomplete infilling of Zeotile-4 material with Pt, provided insight in the connectivity and formation mechanism of the Pt nanostructure by ALD. The Pt replica was evaluated for its potential use as electrocatalyst for the hydrogen evolution reaction, one of the half-reactions of water electrolysis, and as microelectrode for biomedical sensing. The Pt replica showed high activity for the hydrogen evolution reaction and electrochemical characterization revealed a large impedance improvement in comparison with reference Pt electrodes. |
||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000411232100010 | Publication Date | 2017-06-28 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 2050-7488 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 8.867 | Times cited | 9 | Open Access | OpenAccess |
Notes | This work was supported by the Flemish government through long-term structural funding (Methusalem) to JAM and FWO for a research project (G0A5417N). JD, TA and FC acknowledge Flemish FWO for a post-doctoral fellowship. S. B. acknowledges funding from ERC Starting Grant COLOURATOMS (335078). (ROMEO:yellow; preprint:; postprint:restricted ; pdfversion:cannot); saraecas; ECAS_Sara; | Approved | Most recent IF: 8.867 | ||
Call Number | EMAT @ emat @ c:irua:144624 c:irua:144624 c:irua:144624UA @ admin @ c:irua:144624 | Serial | 4634 | ||
Permanent link to this record | |||||
Author | Cao, S.; Tirry, W.; van den Broek, W.; Schryvers, D. | ||||
Title | 3D reconstruction of Ni4Ti3 precipitates in a Ni51Ti49 alloy in a FIB/SEM dual-beam system | Type | A1 Journal article | ||
Year | 2008 | Publication | Materials science forum | Abbreviated Journal | |
Volume | 583 | Issue | Pages | 277-284 | |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab | ||||
Abstract | Ni4Ti3 precipitates play an important role in the shape memory and superelastic behaviour of thermo-mechanically treated Ni-Ti material. The 3D morphology and distribution of such precipitates with lenticular shape and rhombohedral atomic structure in the austenitic B2 matrix of a binary Ni-rich Ni-Ti alloy has been elucidated via a slice view procedure in a Dual-Beam FIB/SEM system. With the sequence of cross-section SE images obtained from the SEM, a 3D reconstruction has been achieved after proper alignment and image processing, from which both qualitative and quantitative analysis can be performed. Careful imaging is needed to ensure that all variants of the precipitates are observed with equal probability, regardless sample orientation. Moreover, due to the weak contrast of the precipitates, proper imaging conditions need to be selected to allow for semi-automated image treatment. Finally, a volume ratio of 10.2% for the Ni4Ti3 precipitates could be calculated, summed over all variants, which yields a net composition of Ni50.36Ti49.64 for the matrix, leading to an increase of 113 degrees for the martensitic start temperature Ms. Also, the expected relative orientation of the different variants of the precipitates could be confirmed. In the near future, other quantitative measures on the distribution of the precipitates can be expected. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Lausanne | Editor | ||
Language | Wos | Publication Date | 2009-03-11 | ||
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1662-9752; | ISBN | Additional Links | UA library record | |
Impact Factor | Times cited | Open Access | |||
Notes | Multimat; Fwo | Approved | Most recent IF: NA | ||
Call Number | UA @ lucian @ c:irua:77454 | Serial | 16 | ||
Permanent link to this record | |||||
Author | Gao, Y.-J.; Jin, H.; Esteban, D.A.; Weng, B.; Saha, R.A.; Yang, M.-Q.; Bals, S.; Steele, J.A.; Huang, H.; Roeffaers, M.B.J. | ||||
Title | 3D-cavity-confined CsPbBr₃ quantum dots for visible-light-driven photocatalytic C(sp³)-H bond activation | Type | A1 Journal article | ||
Year | 2024 | Publication | Carbon Energy | Abbreviated Journal | |
Volume | Issue | Pages | e559 | ||
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | Metal halide perovskite (MHP) quantum dots (QDs) offer immense potential for several areas of photonics research due to their easy and low-cost fabrication and excellent optoelectronic properties. However, practical applications of MHP QDs are limited by their poor stability and, in particular, their tendency to aggregate. Here, we develop a two-step double-solvent strategy to grow and confine CsPbBr3 QDs within the three-dimensional (3D) cavities of a mesoporous SBA-16 silica scaffold (CsPbBr3@SBA-16). Strong confinement and separation of the MHP QDs lead to a relatively uniform size distribution, narrow luminescence, and good ambient stability over 2 months. In addition, the CsPbBr3@SBA-16 presents a high activity and stability for visible-light-driven photocatalytic toluene C(sp(3))-H bond activation to produce benzaldehyde with similar to 730 mu mol g(-1) h(-1) yield rate and near-unity selectivity. Similarly, the structural stability of CsPbBr3@SBA-16 QDs is superior to that of both pure CsPbBr3 QDs and those confined in MCM-41 with 1D channels. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 001223583600001 | Publication Date | 2024-05-16 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 2637-9368 | ISBN | Additional Links | UA library record; WoS full record | |
Impact Factor | Times cited | Open Access | |||
Notes | Approved | Most recent IF: NA | |||
Call Number | UA @ admin @ c:irua:206000 | Serial | 9133 | ||
Permanent link to this record | |||||
Author | Parrilla, M.; Vanhooydonck, A.; Johns, M.; Watts, R.; De Wael, K. | ||||
Title | 3D-printed microneedle-based potentiometric sensor for pH monitoring in skin interstitial fluid | Type | A1 Journal article | ||
Year | 2023 | Publication | Sensors and actuators : B : chemical | Abbreviated Journal | |
Volume | 378 | Issue | Pages | 133159-10 | |
Keywords | A1 Journal article; Engineering sciences. Technology; Internet Data Lab (IDLab); Product development; Antwerp Electrochemical and Analytical Sciences Lab (A-Sense Lab) | ||||
Abstract | Wearable electrochemical sensors are driven by the user-friendly capability of continuous monitoring of key biomarkers for diagnostic or therapeutic operations. Particularly, microneedle (MN)-based sensors can access the interstitial fluid (ISF) in the dermis layer of skin to carry out on-body transdermal detection of analytes. Interestingly, 3D-printing technology allows for rapid and versatile prototyping reaching micrometer resolution. Herein, for the first time, we explore 3D-printed hollow MN patches (1 mm height x 1 mm base with 0.3 mm hole) which are modified with conductive inks to develop a potentiometric sensor for pH monitoring. First, the piercing capability of 3D-printed MN patches is demonstrated by using the parafilm model and their insertion in porcine skin. Subsequently, the hollow MNs are filled with conductive inks to engineer a set of microelectrodes. Thereafter, the working and reference electrodes are properly modified with polyaniline and polyvinyl butyral, respectively, toward a highly stable potentiometric cell. A full in vitro characterization is performed within a broad range of pH (i.e. pH 4 to pH 9). Besides, the MN sensor is analytically assessed in phantom gel and pierced on porcine skin to evaluate the resilience of the MN sensor. Finally, the MN sensor is pierced on the forearm of a subject and tested for its on-body monitoring capability. Overall, 3D-printed MN-based potentiometric sensing brings a versatile and affordable technology to minimally-invasively monitor key physiological parameters in the body. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000904590500008 | Publication Date | 2022-12-12 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0925-4005 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | Times cited | Open Access | OpenAccess | ||
Notes | Approved | Most recent IF: NA | |||
Call Number | UA @ admin @ c:irua:192381 | Serial | 8824 | ||
Permanent link to this record | |||||
Author | Zhang, F.; Vanmeensel, K.; Inokoshi, M.; Batuk, M.; Hadermann, J.; Van Meerbeek, B.; Naert, I.; Vleugels, J. | ||||
Title | 3Y-TZP ceramics with improved hydrothermal degradation resistance and fracture toughness | Type | A1 Journal article | ||
Year | 2014 | Publication | Journal of the European Ceramic Society | Abbreviated Journal | J Eur Ceram Soc |
Volume | 34 | Issue | 10 | Pages | 2453-2463 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | Different factors such as the way of incorporating the Y2O3 stabilizer, alumina addition and sintering temperature were assessed with the goal to improve the low temperature degradation (LTD) resistance of 3Y-TZP without compromising on the mechanical properties. The degradation of hydrothermally treated specimens was studied by X-ray diffraction, micro-Raman spectroscopy and scanning electron microscopy. Decreasing the sintering temperature decreased the LTD susceptibility of 3Y-TZPs but did not allow to obtain a LTD resistant 3Y-TZP with optimized mechanical properties. Alumina addition along with the use of Y2O3 stabilizer coated starting powder allowed to combine both an excellent toughness and LTD resistance, as compared to alumina-free and stabilizer co-precipitated powder based equivalents. Transmission electron microscopy revealed that the improved LTD resistance could be attributed to the segregation of Al3+ at the grain boundary and the heterogeneously distributed Y3+ stabilizer. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Barking | Editor | ||
Language | Wos | 000336352500033 | Publication Date | 2014-03-07 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0955-2219; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 3.411 | Times cited | 48 | Open Access | |
Notes | Fwo G.0431.10n | Approved | Most recent IF: 3.411; 2014 IF: 2.947 | ||
Call Number | UA @ lucian @ c:irua:117065 c:irua:117065 | Serial | 11 | ||
Permanent link to this record | |||||
Author | He, Z.B.; Deng, G.; Tian, H.; Xu, Q.; Van Tendeloo, G. | ||||
Title | 90° Rotation of orbital stripes in bilayer manganite PrCa2Mn2O7 studied by in situ transmission electron microscopy | Type | A1 Journal article | ||
Year | 2013 | Publication | Journal of solid state chemistry | Abbreviated Journal | J Solid State Chem |
Volume | 200 | Issue | Pages | 287-293 | |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | We present an in situ transmission electron microscopy study on the half-doped bilayer manganite PrCa2Mn2O7 to reveal the rotation process of the orbital stripes. Between the reported initial and final ordering phases, we identified an intermediate state with two sets of satellite spots to bridge the 90° rotation of the orbital stripes. Furthermore, we determined that the rotation of the orbital stripes does not always occur. Some restricted conditions for the orbital rotation to occur were found and reasons are discussed. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | London | Editor | ||
Language | Wos | 000317158000043 | Publication Date | 2013-02-08 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0022-4596; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 2.299 | Times cited | 5 | Open Access | |
Notes | Countatoms | Approved | Most recent IF: 2.299; 2013 IF: 2.200 | ||
Call Number | UA @ lucian @ c:irua:106183 | Serial | 20 | ||
Permanent link to this record | |||||
Author | Prituzhalov, V.A.; Abakumov, A.M.; Ardashnikova, E.I.; Dolgikh, V.A.; Van Tendeloo, G. | ||||
Title | :Ba2.1Bi0.9(O, F)6.8-\delta: a new ordered anion-excess fluorite | Type | A1 Journal article | ||
Year | 2007 | Publication | Materials research bulletin | Abbreviated Journal | Mater Res Bull |
Volume | 42 | Issue | 5 | Pages | 861-869 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | |||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | New York, N.Y. | Editor | ||
Language | Wos | 000245842600010 | Publication Date | 2006-10-05 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0025-5408; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 2.446 | Times cited | 4 | Open Access | |
Notes | Approved | Most recent IF: 2.446; 2007 IF: 1.484 | |||
Call Number | UA @ lucian @ c:irua:64724 | Serial | 3515 | ||
Permanent link to this record | |||||
Author | Lioutas, C.B.; Manolikas, C.; Van Tendeloo, G.; van Landuyt, J. | ||||
Title | A 2a2a3c superstructure in hexagonal Ni1-xS : a study by means of electron-diffraction and HRTEM | Type | A1 Journal article | ||
Year | 1993 | Publication | Journal of crystal growth | Abbreviated Journal | J Cryst Growth |
Volume | 126 | Issue | 2-3 | Pages | 457-465 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | The high temperature phase of Ni1-xS has the NiAs-type structure. The coexistence of two superstructures, ''3a3a3c'' and ''2a2a3c'' with the basic phase is confirmed by means of electron diffraction. The 2a2a3c superstructure is studied by means of electron diffraction and high resolution electron microscopy. A structure model is proposed based on the periodic insertion of stacking faults in the NiAs-type basic structure and the ordering of vacancies in alternate metal-atom layers. Microtwinning in very narrow slabs is found to be a main feature of the 2a2a3c regions and two defect models are discussed. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Amsterdam | Editor | ||
Language | Wos | A1993KH92500029 | Publication Date | 2002-10-16 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0022-0248; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 1.698 | Times cited | 4 | Open Access | |
Notes | Approved | no | |||
Call Number | UA @ lucian @ c:irua:103012 | Serial | 23 | ||
Permanent link to this record | |||||
Author | Lioutas, C.B.; Manolikas, C.; Van Tendeloo, G.; van Landuyt, J. | ||||
Title | A 2a2b3c superstructure in hexagonal NiS1-x: a study by means of electron diffraction and HREM | Type | A1 Journal article | ||
Year | 1993 | Publication | Journal of crystal growth | Abbreviated Journal | J Cryst Growth |
Volume | 126 | Issue | Pages | 457-465 | |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | |||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Amsterdam | Editor | ||
Language | Wos | A1993KH92500029 | Publication Date | 0000-00-00 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0022-0248 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 1.698 | Times cited | 4 | Open Access | |
Notes | Approved | no | |||
Call Number | UA @ lucian @ c:irua:7499 | Serial | 9 | ||
Permanent link to this record | |||||
Author | Kolev, S.; Bogaerts, A. | ||||
Title | A 2D model for a gliding arc discharge | Type | A1 Journal article | ||
Year | 2015 | Publication | Plasma sources science and technology | Abbreviated Journal | Plasma Sources Sci T |
Volume | 24 | Issue | 24 | Pages | 015025 |
Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
Abstract | In this study we report on a 2D fluid model of a gliding arc discharge in argon. Despite the 3D nature of the discharge, 2D models are found to be capable of providing very useful information about the operation of the discharge. We employ two modelsan axisymmetric and a Cartesian one. We show that for the considered experiment and the conditions of a low current arc (around 30 mA) in argon, there is no significant heating of the cathode surface and the discharge is sustained by field electron emission from the cathode accompanied by the formation of a cathode spot. The obtained discharge power and voltage are relatively sensitive to the surface properties and particularly to the surface roughness, causing effectively an amplification of the normal electric field. The arc body and anode region are not influenced by this and depend mainly on the current value. The gliding of the arc is modelled by means of a 2D Cartesian model. The arcelectrode contact points are analysed and the gliding mechanism along the electrode surface is discussed. Following experimental observations, the cathode spot is simulated as jumping from one point to another. A complete arc cycle is modelled from initial ignition to arc decay. The results show that there is no interaction between the successive gliding arcs. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Institute of Physics | Place of Publication | Bristol | Editor | |
Language | Wos | 000348298200026 | Publication Date | 2014-12-23 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0963-0252;1361-6595; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 3.302 | Times cited | 34 | Open Access | |
Notes | Approved | Most recent IF: 3.302; 2015 IF: 3.591 | |||
Call Number | c:irua:122538 c:irua:122538 c:irua:122538 c:irua:122538 | Serial | 3 | ||
Permanent link to this record | |||||
Author | Demuynck, R.; Efimova, I.; Lin, A.; Declercq, H.; Krysko, D.V. | ||||
Title | A 3D cell death assay to quantitatively determine ferroptosis in spheroids | Type | A1 Journal article | ||
Year | 2020 | Publication | Cells | Abbreviated Journal | |
Volume | 9 | Issue | 3 | Pages | 703-713 |
Keywords | A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
Abstract | The failure of drug efficacy in clinical trials remains a big issue in cancer research. This is largely due to the limitations of two-dimensional (2D) cell cultures, the most used tool in drug screening. Nowadays, three-dimensional (3D) cultures, including spheroids, are acknowledged to be a better model of the in vivo environment, but detailed cell death assays for 3D cultures (including those for ferroptosis) are scarce. In this work, we show that a new cell death analysis method, named 3D Cell Death Assay (3DELTA), can efficiently determine different cell death types including ferroptosis and quantitatively assess cell death in tumour spheroids. Our method uses Sytox dyes as a cell death marker and Triton X-100, which efficiently permeabilizes all cells in spheroids, was used to establish 100% cell death. After optimization of Sytox concentration, Triton X-100 concentration and timing, we showed that the 3DELTA method was able to detect signals from all cells without the need to disaggregate spheroids. Moreover, in this work we demonstrated that 2D experiments cannot be extrapolated to 3D cultures as 3D cultures are less sensitive to cell death induction. In conclusion, 3DELTA is a more cost-effective way to identify and measure cell death type in 3D cultures, including spheroids. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000529337400180 | Publication Date | 2020-03-13 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 2073-4409 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | Times cited | 5 | Open Access | ||
Notes | ; Research in the D.V.K. group is supported by Fund for Scientific Research Flanders (1506218N, 1507118N, G051918N and G043219N) and Ghent University (Special Research Fund IOP 01/O3618). ; | Approved | Most recent IF: NA | ||
Call Number | UA @ admin @ c:irua:167215 | Serial | 6446 | ||
Permanent link to this record | |||||
Author | Trenchev, G.; Kolev, S.; Bogaerts, A. | ||||
Title | A 3D model of a reverse vortex flow gliding arc reactor | Type | A1 Journal article | ||
Year | 2016 | Publication | Plasma sources science and technology | Abbreviated Journal | Plasma Sources Sci T |
Volume | 25 | Issue | 25 | Pages | 035014 |
Keywords | A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) | ||||
Abstract | In this computational study, a gliding arc plasma reactor with a reverse-vortex flow stabilization is modelled for the first time by a fluid plasma description. The plasma reactor operates with argon gas at atmospheric pressure. The gas flow is simulated using the k-ε Reynolds-averaged Navier–Stokes turbulent model. A quasi-neutral fluid plasma model is used for computing the plasma properties. The plasma arc movement in the reactor is observed, and the results for the gas flow, electrical characteristics, plasma density, electron temperature, and gas temperature are analyzed. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000376557400022 | Publication Date | 2016-04-09 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0963-0252 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 3.302 | Times cited | 20 | Open Access | |
Notes | This research was carried out in the framework of the network on Physical Chemistry of Plasma–Surface Interactions— Interuniversity Attraction Poles, phase VII (http://psi-iap7.ulb. ac.be/), and supported by the Belgian Science Policy Office (BELSPO), and it was also funded by the Fund for Scientific Research Flanders (FWO). Grant number: 11U5316N. | Approved | Most recent IF: 3.302 | ||
Call Number | c:irua:132888 c:irua:132888 | Serial | 4063 | ||
Permanent link to this record | |||||
Author | Parrilla, M.; Sena-Torralba, A.; Steijlen, A.; Morais, S.; Maquieira, Á.; De Wael, K. | ||||
Title | A 3D-printed hollow microneedle-based electrochemical sensing device for in situ plant health monitoring | Type | A1 Journal article | ||
Year | 2024 | Publication | Biosensors and bioelectronics | Abbreviated Journal | |
Volume | 251 | Issue | Pages | 116131-116139 | |
Keywords | A1 Journal article; Engineering sciences. Technology; Antwerp Electrochemical and Analytical Sciences Lab (A-Sense Lab) | ||||
Abstract | Plant health monitoring is devised as a new concept to elucidate in situ physiological processes. The need for increased food production to nourish the growing global population is inconsistent with the dramatic impact of climate change, which hinders crop health and exacerbates plant stress. In this context, wearable sensors play a crucial role in assessing plant stress. Herein, we present a low-cost 3D-printed hollow microneedle array (HMA) patch as a sampling device coupled with biosensors based on screen-printing technology, leading to affordable analysis of biomarkers in the plant fluid of a leaf. First, a refinement of the 3D-printing method showed a tip diameter of 25.9 ± 3.7 μm with a side hole diameter on the microneedle of 228.2 ± 18.6 μm using an affordable 3D printer (<500 EUR). Notably, the HMA patch withstanded the forces exerted by thumb pressing (i.e. 20-40 N). Subsequently, the holes of the HMA enabled the fluid extraction tested in vitro and in vivo in plant leaves (i.e. 13.5 ± 1.1 μL). A paper-based sampling strategy adapted to the HMA allowed the collection of plant fluid. Finally, integrating the sampling device onto biosensors facilitated the in situ electrochemical analysis of plant health biomarkers (i.e. H2O2, glucose, and pH) and the electrochemical profiling of plants in five plant species. Overall, this electrochemical platform advances precise and versatile sensors for plant health monitoring. The wearable device can potentially improve precision farming practices, addressing the critical need for sustainable and resilient agriculture in changing environmental conditions. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 001198047000001 | Publication Date | 2024-02-13 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0956-5663 | ISBN | Additional Links | UA library record; WoS full record | |
Impact Factor | 12.6 | Times cited | Open Access | Not_Open_Access | |
Notes | Approved | Most recent IF: 12.6; 2024 IF: 7.78 | |||
Call Number | UA @ admin @ c:irua:203204 | Serial | 8998 | ||
Permanent link to this record | |||||
Author | Pelloquin, D.; Hervieu, M.; Michel, C.; Van Tendeloo, G.; Maignan, A.; Raveau, B. | ||||
Title | A 94K Hg-based superconductor with a “1212” structure HG0.5Bi0.5Sr2Ca1-xRxCu2O6+\delta (R=ND,Y,Pr) | Type | A1 Journal article | ||
Year | 1993 | Publication | Physica: C : superconductivity | Abbreviated Journal | Physica C |
Volume | 216 | Issue | Pages | 257-263 | |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | |||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Amsterdam | Editor | ||
Language | Wos | A1993ME74800004 | Publication Date | 0000-00-00 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0921-4534 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 0.942 | Times cited | 62 | Open Access | |
Notes | Approved | no | |||
Call Number | UA @ lucian @ c:irua:6844 | Serial | 21 | ||
Permanent link to this record | |||||
Author | de Jong, M.; Sleegers, N.; Schram, J.; Daems, D.; Florea, A.; De Wael, K. | ||||
Title | A Benzocaine‐Induced Local Near‐Surface pH Effect: Influence on the Accuracy of Voltammetric Cocaine Detection | Type | A1 Journal article | ||
Year | 2020 | Publication | Analysis & Sensing | Abbreviated Journal | Anal. Sens. |
Volume | Issue | Pages | anse.202000012 | ||
Keywords | A1 Journal article; Engineering sciences. Technology; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation) | ||||
Abstract | This work reports on a local induced near-surface pH effect (pHS), due to the presence of one analyte, leading to an influence or even suppression of redox signals of a second analyte present in solution. This concept and its impact on voltammetric sensing is illustrated by focusing on the detection of cocaine in the presence of the common adulterant benzocaine. An in-depth study on the occurring interference mechanism and why it occurs for benzocaine specifically and not for other adulterants was performed through the use of multiple electrochemical strategies. It was concluded that the potential shift and loss of intensity of the squarewave voltammetric cocaine signal in the presence of benzocaine was caused by a local pHS effect. A cathodic pretreatment strategy was developed to nonetheless allow accurate cocaine detection. The gathered insights are useful to explain unidentified phenomena involving compounds with properties similar to benzocaine in voltammetric electroanalysis. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | Publication Date | 2020-10-20 | ||
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 2629-2742 | ISBN | Additional Links | UA library record | |
Impact Factor | Times cited | Open Access | |||
Notes | The authors acknowledge financial support from IOF-SBO/POC (UAntwerp), the Fund for Scientific Research (FWO) Flanders, Grant 1S 37658 17N and Grant 1SB 8120N, and VLAIO IM [HBC.2019.2181]. | Approved | Most recent IF: NA | ||
Call Number | AXES @ axes @c:irua:173031 | Serial | 6427 | ||
Permanent link to this record | |||||
Author | Zhong, Z.; Goris, B.; Schoenmakers, R.; Bals, S.; Batenburg, K.J. | ||||
Title | A bimodal tomographic reconstruction technique combining EDS-STEM and HAADF-STEM | Type | A1 Journal article | ||
Year | 2017 | Publication | Ultramicroscopy | Abbreviated Journal | Ultramicroscopy |
Volume | 174 | Issue | 174 | Pages | 35-45 |
Keywords | A1 Journal article; Electron microscopy for materials research (EMAT) | ||||
Abstract | A three-dimensional (3D) chemical characterization of nanomaterials can be obtained using tomography based on high angle annular dark field (HAADF) scanning transmission electron microscopy (STEM) or energy dispersive X-ray spectroscopy (EDS) STEM. These two complementary techniques have both advantages and disadvantages. The Z-contrast images have good image quality but lack robustness in the compositional analysis, while the elemental maps give more element-specific information, but at a low signal-to-noise ratio and a longer exposure time. Our aim is to combine these two types of complementary information in one single tomographic reconstruction process. Therefore, an imaging model is proposed combining both HAADF-STEM and EDS-STEM. Based on this model, the elemental distributions can be reconstructed using both types of information simultaneously during the reconstruction process. The performance of the new technique is evaluated using simulated data and real experimental data. The results demonstrate that combining two imaging modalities leads to tomographic reconstructions with suppressed noise and enhanced contrast. |
||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000403342200005 | Publication Date | 2016-12-11 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0304-3991 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 2.843 | Times cited | 26 | Open Access | OpenAccess |
Notes | This research is supported by the Dutch Technology Foundation STW (http://www.stw.nl/), which is part of the Netherlands Organization for Scientific Research (NWO), and which is partly funded by the Ministry of Economic Affairs, Agriculture and Innovation under project number 13314. It is also supported by the Flemish research foundation (FWO Vlaanderen) by project funding (G038116N) and a postdoctoral research grant to B.G. Funding from the European Research Council (Starting Grant No. COLOURATOMS 335078) is acknowledged by S.B. The authors would like to thank Dr. Bernd Rieger and Dr. Richard Aveyard for useful discussions, and Prof. Dr. Luis M. Liz-Marzan for providing the investigated samples. We also acknowledge COST Action MP1207 for networking support. (ROMEO:green; preprint:; postprint:can ; pdfversion:cannot); saraecas; ECAS_Sara; | Approved | Most recent IF: 2.843 | ||
Call Number | EMAT @ emat @ c:irua:141719UA @ admin @ c:irua:141719 | Serial | 4484 | ||
Permanent link to this record | |||||
Author | Weiβ, R.; Gritsch, S.; Brader, G.; Nikolic, B.; Spiller, M.; Santolin, J.; Weber, H.K.; Schwaiger, N.; Pluchon, S.; Dietel, K.; Guebitz, G.; Nyanhongo, G. | ||||
Title | A biobased, bioactive, low CO₂ impact coating for soil improvers | Type | A1 Journal article | ||
Year | 2021 | Publication | Green Chemistry | Abbreviated Journal | Green Chem |
Volume | 23 | Issue | 17 | Pages | 6501-6514 |
Keywords | A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL) | ||||
Abstract | Lignosulfonate-based bioactive coatings as soil improvers for lawns were developed using laccase as a biocatalyst. Incorporation of glycerol, xylitol and sorbitol as plasticizers considerably reduced the brittleness of the synthesized coatings of marine carbonate granules while thermal enzyme inactivation at 100 degrees C enabled the production of stable coatings. Heat inactivation produced stable coatings with a molecular weight of 2000 kDa and a viscosity of 4.5 x 10(-3) Pas. The desired plasticity for the spray coating of soil improver granules was achieved by the addition of 2.7% of xylitol. Agriculture beneficial microorganisms (four different Bacillus species) were integrated into the coatings. The stable coatings protected the marine calcium carbonate granules, maintained the viability of the microorganisms and showed no toxic effects on the germination and growth of model plants including corn, wheat, salad, and tomato despite a slight delay in germination. Moreover, the coatings reduced the dust formation of soil improvers by 70%. CO2 emission analysis showed potential for the reduction of up to 3.4 kg CO2-eq. kg(-1) product, making it a viable alternative to fossil-based coatings. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000683056500001 | Publication Date | 2021-08-09 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 1463-9262; 1463-9270 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 9.125 | Times cited | Open Access | OpenAccess | |
Notes | Approved | Most recent IF: 9.125 | |||
Call Number | UA @ admin @ c:irua:180511 | Serial | 7558 | ||
Permanent link to this record | |||||
Author | Xie, Y.; Spiller, M.; Vlaeminck, S.E. | ||||
Title | A bioreactor and nutrient balancing approach for the conversion of solid organic fertilizers to liquid nitrate-rich fertilizers : mineralization and nitrification performance complemented with economic aspects | Type | A1 Journal article | ||
Year | 2022 | Publication | The science of the total environment | Abbreviated Journal | Sci Total Environ |
Volume | 806 | Issue | Pages | 150415 | |
Keywords | A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL) | ||||
Abstract | Due to the high water- and nutrient-use efficiency, hydroponic cultivation is increasingly vital in progressing to environment-friendly food production. To further alleviate the environmental impacts of synthetic fertilizer production, the use of recovered nutrients should be encouraged in horticulture and agriculture at large. Solid organic fertilizers can largely contribute to this, yet their physical and chemical nature impedes application in hydroponics. This study proposes a bioreactor for mineralization and nitrification followed by a supplementation step for limiting macronutrients to produce nitrate-based solutions from solid fertilizers, here based on a novel microbial fertilizer. Batch tests showed that aerobic conversions at 35 °C could realize a nitrate (NO₃−-N) production efficiency above 90% and a maximum rate of 59 mg N L−1 d−1. In the subsequent bioreactor test, nitrate production efficiencies were lower (44–51%), yet rates were higher (175–212 mg N L−1 d−1). Calcium and magnesium hydroxide were compared to control the bioreactor pH at 6.0 ± 0.2, while also providing macronutrients for plant production. A mass balance estimation to mimic the Hoagland nutrient solution showed that 92.7% of the NO₃−-N in the Ca(OH)₂ scenario could be organically sourced, while this was only 37.4% in the Mg(OH)₂ scenario. Besides, carbon dioxide (CO₂) generated in the bioreactor can be used for greenhouse carbon fertilization to save operational expenditure (OPEX). An estimation of the total OPEX showed that the production of a nutrient solution from solid organic fertilizers can be cost competitive compared to using commercially available liquid inorganic fertilizer solutions. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000707640400021 | Publication Date | 2021-09-20 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0048-9697 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 9.8 | Times cited | Open Access | OpenAccess | |
Notes | Approved | Most recent IF: 9.8 | |||
Call Number | UA @ admin @ c:irua:181787 | Serial | 7132 | ||
Permanent link to this record | |||||
Author | Rather, J.A.; Pilehvar, S.; De Wael, K. | ||||
Title | A biosensor fabricated by incorporation of a redox mediator into a carbon nanotube/nafion composite for tyrosinase immobilization : detection of matairesinol, an endocrine disruptor | Type | A1 Journal article | ||
Year | 2013 | Publication | The analyst | Abbreviated Journal | Analyst |
Volume | 238 | Issue | Pages | 204-210 | |
Keywords | A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation) | ||||
Abstract | An electrochemical matairesinol biosensor was fabricated by immobilizing tyrosinase on a poly(thionine)/nafion/multi-walled carbon nanotube composite film. A polymeric film of the redox dye thionine enables the stable immobilization of tyrosinase while acting as a mediator for the enzymatic process has been incorporated into the carbon nanotube/nafion composite film. The immobilization method is based on crosslinking of the tyrosinase layer with an electropolymerized film of poly(thionine). The good homogenization of the electron conductor CNTs in the integrated films provides the possibility of a three-dimensional electron conductive network. The biosensor was characterized by electrochemical impedance spectroscopy and electrochemical characterization. The composite electrode exhibits catalytic activity, high sensitivity, stability and is applicable over a wide range of concentrations from 180 nM to 4.33 μM with a detection limit (LOD) of 37 nM. The obtained results suggest that the developed sensor can be successfully used for the determination of phenolic endocrine disruptors over a concentration range covering their environmental levels. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000311823200025 | Publication Date | 2012-10-26 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0003-2654 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 3.885 | Times cited | 23 | Open Access | |
Notes | ; The authors are highly thankful for the mobility grant (Non-Europe Postdoc Fellowship) for one of the authors (Jahangir Ahmad Rather) supported by the Belgian Federal Science Policy (Belspo) co-funded by the Marie Curie Actions from the European Commission. ; | Approved | Most recent IF: 3.885; 2013 IF: 3.906 | ||
Call Number | UA @ admin @ c:irua:101648 | Serial | 5490 | ||
Permanent link to this record | |||||
Author | Baetens, D.; Schoofs, K.; Somers, N.; Denys, S. | ||||
Title | A brief review on Multiphysics modelling of the various physical and chemical phenomena occurring in active oxidation reactors | Type | A1 Journal article | ||
Year | 2023 | Publication | Current opinion in green and sustainable chemistry | Abbreviated Journal | |
Volume | 40 | Issue | Pages | 100764-100766 | |
Keywords | A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL) | ||||
Abstract | Heterogeneous photocatalysis can be used as an advanced oxidation technology frequently studied for application in photoreactors for air and water treatment. Extensive experimental investigation entails high costs and is also time consuming. Multiphysics modelling, a relatively new numerical method, provides a cost-effective and valuable alternative. By reconstructing the reactor geometry in dedicated software, meshing it and solving for occurring physical and chemical phenomena, Multiphysics models can be used to evaluate the performance of different reactor designs, increase insight into the occurring phenomena and study the influence of operational parameters on reactor performance. Finally, Multiphysics models are also developed for various applications like optimising the operational parameters, creating the ideal reactor design or scaling up a lab-scale reactor to a realistic prototype. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000947344000001 | Publication Date | 2023-02-02 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 2452-2236 | ISBN | Additional Links | UA library record; WoS full record | |
Impact Factor | 9.3 | Times cited | Open Access | OpenAccess | |
Notes | Approved | Most recent IF: 9.3; 2023 IF: NA | |||
Call Number | UA @ admin @ c:irua:195208 | Serial | 7278 | ||
Permanent link to this record | |||||
Author | Vinchurkar, S.; De Backer, L.; Vos, W.; Van Holsbeke, C.; de Backer, J.; de Backer, W. | ||||
Title | A case series on lung deposition analysis of inhaled medication using functional imaging based computational fluid dynamics in asthmatic patients : effect of upper airway morphology and comparison with in vivo data | Type | A1 Journal article | ||
Year | 2012 | Publication | Inhalation Toxicology | Abbreviated Journal | Inhal Toxicol |
Volume | 24 | Issue | 2 | Pages | 81-88 |
Keywords | A1 Journal article; Pharmacology. Therapy; Biophysics and Biomedical Physics; Condensed Matter Theory (CMT); Laboratory Experimental Medicine and Pediatrics (LEMP) | ||||
Abstract | Context: Asthma affects 20 million Americans resulting in an economic burden of approximately $18 billion in the US alone (Allergies and Asthma Foundation 2000; National Center for Environmental Health (NCEH) 1999). Research studies based on differences in patient-specific airway morphology for asthma and the associated effect on deposition of inhaled aerosols are currently not available in the literature. Therefore, the role of morphological variations such as upper airway (extrathoracic) occlusion is not well documented. Objective: Functional imaging based computational fluid dynamics (CFD) of the respiratory airways for five asthmatic subjects is performed in this study using computed tomography (CT) based patient-specific airway models and boundary conditions. Methods: CT scans for 5 asthma patients were used to reconstruct 3D lung models using segmentation software. An averaged inhalation profile and patient-specific lobar flow distribution were used to perform the simulation. The simulations were used to obtain deposition for BDP/Formoterol (R) HFA pMDI in the patient-specific airway models. Results: The lung deposition obtained using CFD was in excellent agreement with available in vivo data using the same product. Specifically, CFD resulted in 30% lung deposition, whereas in vivo lung deposition was reported to be approximately 31%. Conclusion: It was concluded that a combination of patient-specific airway models and lobar boundary conditions can be used to obtain accurate lung deposition estimates. Lower lung deposition can be expected for patients with higher extrathoracic resistance. Novel respiratory drug delivery devices need to accommodate population subgroups based on these morphological and anatomical differences in addition to subject age. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | New York, N.Y. | Editor | ||
Language | Wos | 000299744800001 | Publication Date | 2012-01-20 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0895-8378;1091-7691; | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | 1.751 | Times cited | 36 | Open Access | |
Notes | ; ; | Approved | Most recent IF: 1.751; 2012 IF: 1.894 | ||
Call Number | UA @ lucian @ c:irua:96238 | Serial | 286 | ||
Permanent link to this record | |||||
Author | Potgieter, J.H.; Godoi, R.H.M.; Van Grieken, R. | ||||
Title | A case study of high-temperature corrosion in rotary cement kilns | Type | A1 Journal article | ||
Year | 2004 | Publication | Journal of the South African Institute of Mining and Metallurgy | Abbreviated Journal | |
Volume | 104 | Issue | Pages | 603-606 | |
Keywords | A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation) | ||||
Abstract | |||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000226560900008 | Publication Date | ||
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0038-223x | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | Times cited | Open Access | |||
Notes | Approved | no | |||
Call Number | UA @ admin @ c:irua:50187 | Serial | 7581 | ||
Permanent link to this record | |||||
Author | Noone, K.J.; Johnson, D.W.; Taylor, J.P.; Ferek, R.J.; Garrett, T.; Hobbs, P.V.; Durkee, P.A.; Nielsen, K.; Öström, E.; O'Dowd, C.D.; Smith, M.H.; Russell, L.M.; Flagan, R.C.; Seinfeld, J.H.; de Bock, L.; Van Grieken, R.E.; Hudson, J.G.; Brooks, I.; Gasparovic, R.F.; Pockalny, R.A. | ||||
Title | A case study of ship track formation in a polluted marine boundary layer | Type | A1 Journal article | ||
Year | 2000 | Publication | Journal of the atmospheric sciences | Abbreviated Journal | |
Volume | 57 | Issue | Pages | 2748-2764 | |
Keywords | A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation) | ||||
Abstract | |||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000088911800016 | Publication Date | 2002-07-27 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0022-4928; 1520-0469 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | Times cited | Open Access | |||
Notes | Approved | no | |||
Call Number | UA @ admin @ c:irua:31631 | Serial | 7582 | ||
Permanent link to this record | |||||
Author | Noone, K.J.; Öström, E.; Ferek, R.J.; Garrett, T.; Hobbs, P.V.; Johnson, D.W.; Taylor, J.P.; Russell, L.M.; Flagan, R.C.; Seinfeld, J.H.; O'Dowd, C.D.; Smith, M.H.; Durkee, P.A.; Nielsen, K.; Hudson, J.G.; Pockalny, R.A.; de Bock, L.; Van Grieken, R.E.; Gasparovic, R.F.; Brooks, I. | ||||
Title | A case study of ships forming and not forming tracks in moderately polluted clouds | Type | A1 Journal article | ||
Year | 2000 | Publication | Journal of the atmospheric sciences | Abbreviated Journal | |
Volume | 57 | Issue | Pages | 2729-2747 | |
Keywords | A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation) | ||||
Abstract | |||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000088911800015 | Publication Date | 2002-07-27 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0022-4928; 1520-0469 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | Times cited | Open Access | |||
Notes | Approved | no | |||
Call Number | UA @ admin @ c:irua:31624 | Serial | 7583 | ||
Permanent link to this record | |||||
Author | Potgieter-Vermaak, S.S.; Potgieter, J.H.; Kruger, R.A.; Spolnik, Z.; Van Grieken, R. | ||||
Title | A characterisation of the surface properties of an ultra fine fly ash (UFFA) used in the polymer industry | Type | A1 Journal article | ||
Year | 2005 | Publication | Fuel | Abbreviated Journal | |
Volume | 84 | Issue | 18 | Pages | 2295-2300 |
Keywords | A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation) | ||||
Abstract | |||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000233053100002 | Publication Date | 2005-06-28 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | 0016-2361 | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | |
Impact Factor | Times cited | Open Access | |||
Notes | Approved | no | |||
Call Number | UA @ admin @ c:irua:54564 | Serial | 7603 | ||
Permanent link to this record | |||||
Author | Sathiya, M.; Jacquet, Q; Doublet, M.L; Karakulina, O.M.; Hadermann, J.; Tarascon, J.-M. | ||||
Title | A Chemical Approach to Raise Cell Voltage and Suppress Phase Transition in O3 Sodium Layered Oxide Electrodes | Type | A1 Journal article | ||
Year | 2018 | Publication | Advanced energy materials | Abbreviated Journal | Adv. Energy Mater. |
Volume | Issue | Pages | |||
Keywords | A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) | ||||
Abstract | Sodium ion batteries (NIBs) are one of the versatile technologies for lowcost rechargeable batteries. O3-type layered sodium transition metal oxides (NaMO2, M = transition metal ions) are one of the most promising positive electrode materials considering their capacity. However, the use of O3 phases is limited due to their low redox voltage and associated multiple phase transitions which are detrimental for long cycling. Herein, a simple strategy is proposed to successfully combat these issues. It consists of the introduction of a larger, nontransition metal ion Sn4+ in NaMO2 to prepare a series of NaNi0.5Mn0.5−y SnyO2 (y = 0–0.5) compositions with attractive electrochemical performances, namely for y = 0.5, which shows a single-phase transition from O3 ⇔ P3 at the very end of the oxidation process. Na-ion NaNi0.5Sn0.5O2/C coin cells are shown to deliver an average cell voltage of 3.1 V with an excellent capacity retention as compared to an average stepwise voltage of ≈2.8 V and limited capacity retention for the pure NaNi0.5Mn0.5O2 phase. This study potentially shows the way to manipulate the O3 NaMO2 for facilitating their practical use in NIBs. | ||||
Address | |||||
Corporate Author | Thesis | ||||
Publisher | Place of Publication | Editor | |||
Language | Wos | 000430163100013 | Publication Date | 2018-01-11 | |
Series Editor | Series Title | Abbreviated Series Title | |||
Series Volume | Series Issue | Edition | |||
ISSN | ISBN | Additional Links | UA library record; WoS full record; WoS citing articles | ||
Impact Factor | 21.875 | Times cited | 28 | Open Access | OpenAccess |
Notes | M.S. and Q.J. contributed equally to this work. The authors thank Dr. Daniel Alves Dalla Corte and Sujoy Saha for electronic conductivity measurements and Prof. Dominique Larcher for fruitful discussions. Q.J. thanks the ANR “Deli-Redox” for Ph.D. funding. J.-M.T. acknowledges funding from the European Research Council (ERC) (FP/2014)/ERC Grant-Project 670116-ARPEMA. TGA analysis by Matthieu Courty, LRCS, Amiens, is greatly acknowledged. J.H. and O.M.K. acknowledge funding from FWO Vlaanderen project G040116N. | Approved | Most recent IF: NA | ||
Call Number | EMAT @ emat @c:irua:149515 | Serial | 4907 | ||
Permanent link to this record |