Home << 1 2 3 4 5 6 7 8 9 10 11 12 >>
List View
 | 
Citations
 | 
Details
   web
Records
Author Pourbabak, S.; Verlinden, B.; Van Humbeeck, J.; Schryvers, D.
Title DSC cycling effects on phase transformation temperatures of micron and submicron grain Ni50.8Ti49.2 microwires Type A1 Journal article
Year 2020 Publication (down) Shape memory and superelasticity Abbreviated Journal
Volume Issue Pages 1-10
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract The effect of thermal cycling parameters on the phase transformation temperatures of micron and submicron grain size recrystallized Ni-Ti microwires was investigated. The suppression of martensitic transformation by thermal cycling was found to enhance when combined with room temperature aging between the cycles and enhances even more when aged at elevated temperature of 100 degrees C. While aging at room temperature alone has no clear effect on the martensitic transformation, elevated temperature aging at 100 degrees C alone suppresses the martensitic transformation. All aforementioned effects were found to be stronger in large grain samples than in small grain samples. Martensitic transformation suppression in all cases was in line with the formation of Ni4Ti3 precursors in the form of < 111 & rang;(B2) Ni clusters as concluded from the observed diffuse intensity in the electron diffraction patterns revealing short-range ordering enhancement. Performing thermal cycling in some different temperature ranges to separate the effect of martensitic transformation and high temperature range of DSC cycling revealed that both high temperature- and martensitic transformation-included cycles enhance the short-range ordering.
Address
Corporate Author Thesis
Publisher Place of Publication Editor
Language Wos 000530232800001 Publication Date 2020-05-04
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 2199-384x; 2199-3858 ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor Times cited 1 Open Access Not_Open_Access
Notes ; S.P. would like to thank the Flemish Science Foundation FWO for financial support under Project G.0366.15N. ; Approved Most recent IF: NA
Call Number UA @ admin @ c:irua:169514 Serial 6492
Permanent link to this record
 
 
Author Schryvers, D.; Lahjouji, D.E.; Slootmaekers, B.; Potapov, P.L.
Title HREM investigation of martensite precursor effects and stacking sequences in Ni-Mn-Ti alloys Type A1 Journal article
Year 1996 Publication (down) Scripta metallurgica et materialia Abbreviated Journal Scripta Mater
Volume 35 Issue Pages 1235-1241
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract
Address
Corporate Author Thesis
Publisher Place of Publication New York Editor
Language Wos A1996VL92800019 Publication Date 2002-07-26
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1359-6462; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 3.224 Times cited 2 Open Access
Notes Approved no
Call Number UA @ lucian @ c:irua:15427 Serial 1506
Permanent link to this record
 
 
Author Yang, Z.; Tirry, W.; Schryvers, D.
Title Analytical TEM investigations on concentration gradients surrounding Ni4Ti3 precipitates in Ni-Ti shape memory material Type A1 Journal article
Year 2005 Publication (down) Scripta materialia Abbreviated Journal Scripta Mater
Volume 52 Issue 11 Pages 1129-1134
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract
Address
Corporate Author Thesis
Publisher Place of Publication Oxford Editor
Language Wos 000228190200010 Publication Date 2005-03-16
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1359-6462; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 3.747 Times cited 49 Open Access
Notes GOA project; MCRTN-FP6-505226 Multimat Approved Most recent IF: 3.747; 2005 IF: 2.228
Call Number UA @ lucian @ c:irua:55687 Serial 110
Permanent link to this record
 
 
Author Li, K.; Béché, A.; Song, M.; Sha, G.; Lu, X.; Zhang, K.; Du, Y.; Ringer, S.P.; Schryvers, D.
Title Atomistic structure of Cu-containing \beta" precipitates in an Al-Mg-Si-Cu alloy Type A1 Journal article
Year 2014 Publication (down) Scripta materialia Abbreviated Journal Scripta Mater
Volume 75 Issue Pages 86-89
Keywords A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
Abstract The beta '' precipitates in a peak-aged Al-Mg-Si-Cu alloy were measured with an average composition of 28.6Al-38.7Mg-26.5Si-5.17Cu (at.%) using atom probe tomography. High-angle annular dark-field observations revealed that Cu incompletely substitutes for the Mg-1 and Si-3 columns, preferentially for one column in each pair of Si-3. Cu-free Si columns form a parallelogram-shaped network that constitutes the basis of subsequent precipitates in the system, with a = 0.37 nm, b = 0.38 nm, gamma = 113 degrees and c = 0.405 nm. (C) 2013 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
Address
Corporate Author Thesis
Publisher Place of Publication Oxford Editor
Language Wos 000331025200022 Publication Date 2013-12-07
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1359-6462; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 3.747 Times cited 22 Open Access
Notes Approved Most recent IF: 3.747; 2014 IF: 3.224
Call Number UA @ lucian @ c:irua:115749 Serial 201
Permanent link to this record
 
 
Author Santamarta, R.; Schryvers, D.
Title Effect of amorphous-crystalline interfaces on the martensitic transformation in Ti50Ni25Cu25 Type A1 Journal article
Year 2004 Publication (down) Scripta materialia Abbreviated Journal Scripta Mater
Volume 50 Issue Pages 1423-1427
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract
Address
Corporate Author Thesis
Publisher Place of Publication Oxford Editor
Language Wos 000221009500002 Publication Date 2004-04-13
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1359-6462; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 3.747 Times cited 29 Open Access
Notes Approved Most recent IF: 3.747; 2004 IF: 2.112
Call Number UA @ lucian @ c:irua:48379 Serial 795
Permanent link to this record
 
 
Author Shi, H.; Pourbabak, S.; Van Humbeeck, J.; Schryvers, D.
Title Electron microscopy study of Nb-rich nanoprecipitates in NiTiNb and their influence on the martensitic transformation Type A1 Journal article
Year 2012 Publication (down) Scripta materialia Abbreviated Journal Scripta Mater
Volume 67 Issue 12 Pages 939-942
Keywords A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
Abstract Nb-rich nanoprecipitates in the matrix of an annealed commercial NiTiNb alloy are investigated by scanning and transmission electron microscopy, including slice-and-view and chemical analysis. The precipitates have a diameter of around 100 nm, are faceted and have a cube-on-cube relation with the B2 matrix. In situ TEM cooling shows that the martensitic transformation is hampered by the presence of these precipitates. The latter could explain the increase in hysteresis when compared with the binary system.
Address
Corporate Author Thesis
Publisher Place of Publication Oxford Editor
Language Wos 000311135000005 Publication Date 2012-08-27
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1359-6462; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 3.747 Times cited 29 Open Access
Notes Fwo Approved Most recent IF: 3.747; 2012 IF: 2.821
Call Number UA @ lucian @ c:irua:101486 Serial 971
Permanent link to this record
 
 
Author Cao, S.; Somsen, C.; Croitoru, M.; Schryvers, D.; Eggeler, G.
Title Focused ion beam/scanning electron microscopy tomography and conventional transmission electron microscopy assessment of Ni4Ti3 morphology in compression-aged Ni-rich Ni-Ti single crystals Type A1 Journal article
Year 2010 Publication (down) Scripta materialia Abbreviated Journal Scripta Mater
Volume 62 Issue 6 Pages 399-402
Keywords A1 Journal article; Electron microscopy for materials research (EMAT); Condensed Matter Theory (CMT)
Abstract The size, morphology and configuration of Ni4Ti3 precipitates in a single-crystal NiTi alloy have been investigated by two-dimensional transmission electron microscopy-based image analysis and three-dimensional reconstruction from slice-and-view images obtained in a focused ion beam/scanning electron microscopy (FIB/SEM) dual-beam system. Average distances between the precipitates measured along the compression direction correlate well between both techniques, while particle shape and configuration data is best obtained from FIB/SEM. Precipitates form pockets of B2 of 0.54 ìm in the compression direction and 1 ìm perpendicular to the compression direction.
Address
Corporate Author Thesis
Publisher Place of Publication Oxford Editor
Language Wos 000275072700020 Publication Date 2009-12-04
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1359-6462; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 3.747 Times cited 16 Open Access
Notes Fwo Approved Most recent IF: 3.747; 2010 IF: 2.820
Call Number UA @ lucian @ c:irua:79817 Serial 1246
Permanent link to this record
 
 
Author Idrissi, H.; Ryelandt, L.; Veron, M.; Schryvers, D.; Jacques, P.J.
Title Is there a relationship between the stacking fault character and the activated mode of plasticity of FeMn-based austenitic steels? Type A1 Journal article
Year 2009 Publication (down) Scripta materialia Abbreviated Journal Scripta Mater
Volume 60 Issue 11 Pages 941-944
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract By changing the testing temperature, an austenitic FeMnAlSi alloy presents either å-martensite transformation or mechanical twinning during straining. In order to understand the nucleation and growth mechanisms involved in both phenomena, defects and particularly stacking faults, were characterized by transmission electron microscopy. It is observed that the character of the stacking faults also changes (from extrinsic to intrinsic) together with the temperature and the activated mode of plasticity.
Address
Corporate Author Thesis
Publisher Place of Publication Oxford Editor
Language Wos 000265359900005 Publication Date 2009-02-10
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1359-6462; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 3.747 Times cited 84 Open Access
Notes Iap Approved Most recent IF: 3.747; 2009 IF: 2.949
Call Number UA @ lucian @ c:irua:77276 Serial 1751
Permanent link to this record
 
 
Author Bartova, B.; Schryvers, D.; Yang, Z.; Ignacova, S.; Sittner, P.
Title Microstructure and precipitates in as-cast Co38Ni33Al29 shape memory alloy Type A1 Journal article
Year 2007 Publication (down) Scripta materialia Abbreviated Journal Scripta Mater
Volume 57 Issue 1 Pages 37-40
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract
Address
Corporate Author Thesis
Publisher Place of Publication Oxford Editor
Language Wos 000246632900010 Publication Date 2007-04-13
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1359-6462; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 3.747 Times cited 22 Open Access
Notes Approved Most recent IF: 3.747; 2007 IF: 2.481
Call Number UA @ lucian @ c:irua:64753 Serial 2059
Permanent link to this record
 
 
Author Potapov, P.; Shelyakov, A.; Schryvers, D.
Title On the crystal structure of TiNi-Cu martensite Type A1 Journal article
Year 2001 Publication (down) Scripta materialia Abbreviated Journal Scripta Mater
Volume 44 Issue Pages 1-7
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract
Address
Corporate Author Thesis
Publisher Place of Publication Oxford Editor
Language Wos 000166808100001 Publication Date 2002-07-25
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1359-6462; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 3.747 Times cited 36 Open Access
Notes Approved Most recent IF: 3.747; 2001 IF: 1.130
Call Number UA @ lucian @ c:irua:48378 Serial 2433
Permanent link to this record
 
 
Author Idrissi, H.; Renard, K.; Schryvers, D.; Jacques, P.J.
Title On the relationship between the twin internal structure and the work-hardening rate of TWIP steels Type A1 Journal article
Year 2010 Publication (down) Scripta materialia Abbreviated Journal Scripta Mater
Volume 63 Issue 10 Pages 961-964
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract FeMnC and FeMnSiAl TWIP steels deformed under the same conditions exhibit different work-hardening rates. The present study investigates the microstructure of plastically deformed FeMnC and FeMnSiAl samples, particularly the internal structure of the mechanically generated twins and their topology at the grain scale. Twins in the FeMnC steel are finer and full of sessile dislocations, rendering this material distinctly stronger with an improved work-hardening rate.
Address
Corporate Author Thesis
Publisher Place of Publication Oxford Editor
Language Wos 000282461800003 Publication Date 2010-07-20
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1359-6462; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 3.747 Times cited 145 Open Access
Notes Iap Approved Most recent IF: 3.747; 2010 IF: 2.820
Call Number UA @ lucian @ c:irua:84472 Serial 2452
Permanent link to this record
 
 
Author Renard, K.; Idrissi, H.; Schryvers, D.; Jacques, P.J.
Title On the stress state dependence of the twinning rate and work hardening in twinning-induced plasticity steels Type A1 Journal article
Year 2012 Publication (down) Scripta materialia Abbreviated Journal Scripta Mater
Volume 66 Issue 12 Pages 966-971
Keywords A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
Abstract The influence of the stress state on the twinning rate and work hardening is studied in the case of an FeMnC TWIP steel strained in uniaxial tension, simple shear and rolling. The resulting stressstrain responses exhibit marked differences. The twinning rate, number of activated twinning systems in each grain, twin thickness and transmission of twins across grain boundaries are dependent on the imposed stress state during straining. Relationships between twin features and macroscopic work hardening rate are established.
Address
Corporate Author Thesis
Publisher Place of Publication Oxford Editor
Language Wos 000304641500004 Publication Date 2012-02-10
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1359-6462; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 3.747 Times cited 41 Open Access
Notes Iap Approved Most recent IF: 3.747; 2012 IF: 2.821
Call Number UA @ lucian @ c:irua:98374 Serial 2454
Permanent link to this record
 
 
Author Cao, S.; Pourbabak, S.; Schryvers, D.
Title Quantitative 3-D morphologic and distributional study of Ni4Ti3 precipitates in a Ni51Ti49 single crystal alloy Type A1 Journal article
Year 2012 Publication (down) Scripta materialia Abbreviated Journal Scripta Mater
Volume 66 Issue 9 Pages 650-653
Keywords A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
Abstract The size, shape and distribution of Ni4Ti3 precipitates in Ni51Ti49 single crystals annealed under stress-free and 〈1 1 1〉B2 compressive conditions are studied via focused ion beam/scanning electron microscopy slice-and-view. The precipitates in the stress-free material grow in autocatalytic pockets with larger size, lower number density, flatter shape and larger inter-particle distance than in the compressed material. Nevertheless, a new quantification method called water penetration reveals that, due to the precipitate alignment, martensite can grow more easily in the compressed material perpendicular to the compression direction.
Address
Corporate Author Thesis
Publisher Place of Publication Oxford Editor
Language Wos 000302425100010 Publication Date 2012-01-30
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1359-6462; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 3.747 Times cited 8 Open Access
Notes Fwo Approved Most recent IF: 3.747; 2012 IF: 2.821
Call Number UA @ lucian @ c:irua:97387 Serial 2743
Permanent link to this record
 
 
Author Wang, X.; Li, K.; Schryvers, D.; Verlinden, B.; Van Humbeeck, J.
Title R-phase transition and related mechanical properties controlled by low-temperature aging treatment in a Ti50.8 at.% Ni thin wire Type A1 Journal article
Year 2014 Publication (down) Scripta materialia Abbreviated Journal Scripta Mater
Volume 72-73 Issue Pages 21-24
Keywords A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
Abstract A cold-drawn Ti50.8 at.% Ni wire was annealed at 600 °C for 30 min, followed by aging at 250 °C for different times. A microstructure with small grains and nanoscaled precipitates was obtained. The thermally induced martensite transformation is suppressed in the samples aged for 4 h or longer, leaving a one-stage R-phase transition between −150 and +150 °C. The transformation behavior, work output and recovery stress associated with the R-phase transition are presented.
Address
Corporate Author Thesis
Publisher Place of Publication Oxford Editor
Language Wos 000329148500006 Publication Date 2013-10-17
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1359-6462; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 3.747 Times cited 27 Open Access
Notes Fwo Approved Most recent IF: 3.747; 2014 IF: 3.224
Call Number UA @ lucian @ c:irua:111847 Serial 2806
Permanent link to this record
 
 
Author Wang, B.; Idrissi, H.; Shi, H.; Colla, M.S.; Michotte, S.; Raskin, J.P.; Pardoen, T.; Schryvers, D.
Title Texture-dependent twin formation in nanocrystalline thin Pd films Type A1 Journal article
Year 2012 Publication (down) Scripta materialia Abbreviated Journal Scripta Mater
Volume 66 Issue 11 Pages 866-871
Keywords A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
Abstract Nanocrystalline Pd films were produced by electron-beam evaporation and sputter deposition. The electron-beam-evaporated films reveal randomly oriented nanograins with a relatively high density of growth twins, unexpected in view of the high stacking fault energy of Pd. In contrast, sputter-deposited films show a clear 〈1 1 1〉 crystallographic textured nanostructure without twins. These results provide insightful information to guide the generation of microstructures with enhanced strength/ductility balance in high stacking fault energy nanocrystalline metallic thin films.
Address
Corporate Author Thesis
Publisher Place of Publication Oxford Editor
Language Wos 000303621900007 Publication Date 2012-01-31
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1359-6462; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 3.747 Times cited 19 Open Access
Notes Iap; Fwo Approved Most recent IF: 3.747; 2012 IF: 2.821
Call Number UA @ lucian @ c:irua:96955 Serial 3566
Permanent link to this record
 
 
Author Delville, R.; Schryvers, D.; Zhang, Z.; James, R.D.
Title Transmission electron microscopy investigation of microstructures in low-hysteresis alloys with special lattice parameters Type A1 Journal article
Year 2009 Publication (down) Scripta materialia Abbreviated Journal Scripta Mater
Volume 60 Issue 5 Pages 293-296
Keywords A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
Abstract A sharp drop in hysteresis is observed for shape memory alloys satisfying the compatibility condition between austenite and martensite, i.e. ë2 = 1, where ë2 is the middle eigenvalue of the transformation strain matrix. The present work investigates the evolution of microstructure by transmission electron microscopy as the composition of the Ti50Ni50−xPdx system is systemically tuned to achieve the condition ë2 = 1. Changes in morphology, twinning density and twinning modes are reported along with twinless martensite and exact austenitemartensite interfaces.
Address
Corporate Author Thesis
Publisher Place of Publication Oxford Editor
Language Wos 000262553300007 Publication Date 2008-11-08
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1359-6462; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 3.747 Times cited 56 Open Access
Notes Multimat Approved Most recent IF: 3.747; 2009 IF: 2.949
Call Number UA @ lucian @ c:irua:76017 Serial 3710
Permanent link to this record
 
 
Author Schryvers, D.; Firstov, G.S.; Seo, J.W.; van Humbeeck, J.; Koval, Y.N.
Title Unit cell determination in CuZr martensite by EM and X-ray diffraction Type A1 Journal article
Year 1997 Publication (down) Scripta materialia Abbreviated Journal Scripta Mater
Volume 36 Issue Pages 1119-1125
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract
Address
Corporate Author Thesis
Publisher Place of Publication Oxford Editor
Language Wos A1997WV99600007 Publication Date 0000-00-00
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1359-6462 ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 3.747 Times cited 76 Open Access
Notes Approved Most recent IF: 3.747; 1997 IF: 0.645
Call Number UA @ lucian @ c:irua:21344 Serial 3811
Permanent link to this record
 
 
Author Charalampopoulou, E.; Cautaerts, N.; Van der Donck, T.; Schryvers, D.; Lambrinou, K.; Delville, R.
Title Orientation relationship of the austenite-to-ferrite transformation in austenitic stainless steels due to dissolution corrosion in contact with liquid Pb-Bi eutectic Type A1 Journal article
Year 2019 Publication (down) Scripta materialia Abbreviated Journal Scripta Mater
Volume 167 Issue 167 Pages 66-70
Keywords A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
Abstract The orientation relationship of an austenite-to-ferrite phase transformation in 316L stainless steels induced by the loss of austenite stabilizers resulting from the steel dissolution corrosion in liquid Pb-Bi eutectic was studied by means of electron backscatter diffraction. The misorientations at the austenite/ferrite interface were compared to the prevailing orientation relationship models in steels. The Pitsch orientation relationship model was found to be predominant, which is unusual for austenite-to-ferrite bulk transformations in steels. The nature of this particular transformation, which involves loss of steel alloying elements and the presence of an interfacial liquid metal layer, is discussed to explain this finding. (C) 2019 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
Address
Corporate Author Thesis
Publisher Place of Publication Editor
Language Wos 000468720000014 Publication Date 2019-04-06
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1359-6462 ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 3.747 Times cited 3 Open Access Not_Open_Access
Notes ; The authors would like to thank J. Joris (SCK center dot CEN) for technical support during corrosion testing, J. Lim (SCK center dot CEN) for the manufacture and calibration of the oxygen sensors used in this work and W. Van Renterghem (SCK center dot CEN) for his valuable help with the EBSD measurements. The steel suppliers were: Industeel, ArcelorMittal Group, for the 316L-SA plate, and Panchmahal Steel Ltd., India, for the 316L-CWrod. The authors gratefully acknowledge the financial support provided within the framework of the ongoing development of the MYRRHA irradiation facility. The research leading to these results falls within the framework of the European Energy Research Alliance Joint Programme on Nuclear Materials (EERA JPNM). ; Approved Most recent IF: 3.747
Call Number UA @ admin @ c:irua:160228 Serial 5257
Permanent link to this record
 
 
Author Wang, X.; Yao, X.; Schryvers, D.; Verlinden, B.; Wang, G.; Zhao, G.; Van Humbeeck, J.; Kustov, S.
Title Anomalous stress-strain behavior of NiTi shape memory alloy close to the border of superelastic window Type A1 Journal article
Year 2021 Publication (down) Scripta Materialia Abbreviated Journal Scripta Mater
Volume 204 Issue Pages 114135
Keywords A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
Abstract In this work, we report an anomalous phenomenon on superelastic cycling of NiTi shape memory alloys when deforming at the temperature close to the border of superelastic window. New unexpected effects are found-(i) critical stress for inducing martensite transformation during the second loading cycle is higher than that of the first cycle; ( ii ) the plateau stress of the second cycle decreases to the original level when the strain overcomes the limit of the first cycle; ( iii ) transition from good superelasticity in the first cycle to fully irreversible strain in the second. We propose that defects generated during the first superelastic cycle close to the border of superelastic window impede following stress-induced martensitic transformations, leading to the increase of critical stress beyond yield stress of the B2 matrix, and thus functional fatigue of NiTi alloys. (c) 2021 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
Address
Corporate Author Thesis
Publisher Place of Publication Editor
Language Wos 000690441400007 Publication Date 2021-07-14
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1359-6462 ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 3.747 Times cited Open Access OpenAccess
Notes Approved Most recent IF: 3.747
Call Number UA @ admin @ c:irua:181658 Serial 6853
Permanent link to this record
 
 
Author Ding, L.; Sapanathan, T.; Schryvers, D.; Simar, A.; Idrissi, H.
Title On the formation of antiphase boundaries in Fe₄Al₁₃ intermetallics during a high temperature treatment Type A1 Journal article
Year 2022 Publication (down) Scripta materialia Abbreviated Journal Scripta Mater
Volume 215 Issue Pages 114726-6
Keywords A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
Abstract In this paper, we report atomic scale observations and formation mechanisms of a high-density of antiphase boundaries (APBs) within an ultra-fine-grained Fe4Al13 intermetallic layer at an Al/steel interface after a heat treatment at 596 degrees C. The results reveal that the APBs are formed by nucleation and the glide of partial dislocations with Burgers vector of b/3[010] (b = 12.47 angstrom). The intensive activation of APBs locally transforms the Fe4Al13 structure from the quasicrystal approximant structure to a quasicrystal. Very few stacking faults and nanotwins are observed indicating that the formation of planar defects is mainly driven by this transformation. This new insight on the formation of high density of APBs could possibly lead to an improvement in toughness by increasing the strength/ductility balance of this intermetallic.
Address
Corporate Author Thesis
Publisher Place of Publication Editor
Language Wos 000800016600003 Publication Date 2022-04-08
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1359-6462 ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 6 Times cited Open Access OpenAccess
Notes Approved Most recent IF: 6
Call Number UA @ admin @ c:irua:188644 Serial 7088
Permanent link to this record
 
 
Author Yang, T.; Kong, Y.; Du, Y.; Li, K.; Schryvers, D.
Title Discovery of core-shell quasicrystalline particles Type A1 Journal article
Year 2023 Publication (down) Scripta materialia Abbreviated Journal
Volume 222 Issue Pages 115040-115046
Keywords A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
Abstract Submicron-sized quasicrystalline particles were obtained in an Al-Zn-Mg-Cu alloy produced by traditional melting. These particles consist of an Al-Fe-Ni core and a Mg-Cu-Zn shell and were found to be stable and embedded randomly in the Al matrix. The diffraction patterns of these core-shell particles reveal a decagonal core and an icosahedral shell with, respectively, ten- and five-fold axes aligned. High resolution scanning transmission electron microscopy of the Mg-Cu-Zn shell confirms the five-fold symmetry atomic arrangement and the icosahedral structure. It can therefore be concluded that Fe and Ni impurities play an important role in mediating the formation of such an unusual ternary core-shell quasicrystalline particle. These findings provide some novel insights in the formation of quasicrystals in traditional industrial Al alloys.
Address
Corporate Author Thesis
Publisher Place of Publication Editor
Language Wos 000864491400005 Publication Date 2022-09-11
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1359-6462 ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 6 Times cited Open Access OpenAccess
Notes Approved Most recent IF: 6; 2023 IF: 3.747
Call Number UA @ admin @ c:irua:191489 Serial 7144
Permanent link to this record
 
 
Author Samaee, V.; Gatti, R.; Devincre, B.; Pardoen, T.; Schryvers, D.; Idrissi, H.
Title Dislocation driven nanosample plasticity: new insights from quantitative in-situ TEM tensile testing Type A1 Journal Article
Year 2018 Publication (down) Scientific Reports Abbreviated Journal Sci Rep-Uk
Volume 8 Issue 1 Pages 12012
Keywords A1 Journal Article; Electron Microscopy for Materials Science (EMAT) ;
Abstract Intrinsic dislocation mechanisms in the vicinity of free surfaces of an almost FIB damage-free single crystal Ni sample have been quantitatively investigated owing to a novel sample preparation method combining twin-jet electro-polishing, in-situ TEM heating and FIB. The results reveal that the small-scale plasticity is mainly controlled by the conversion of few tangled dislocations, still present after heating, into stable single arm sources (SASs) as well as by the successive operation of these sources. Strain hardening resulting from the operation of an individual SAS is reported and attributed to the decrease of the length of the source. Moreover, the impact of the shortening of the dislocation source on the intermittent plastic flow, characteristic of SASs, is discussed. These findings provide essential information for the understanding of the regime of ‘dislocation source’ controlled plasticity and the related mechanical size effect.
Address
Corporate Author Thesis
Publisher Place of Publication Editor
Language Wos 000460200900001 Publication Date 2018-08-07
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 2045-2322 ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 4.259 Times cited 9 Open Access Not_Open_Access
Notes Financial support from the Flemish (FWO) and German Research Foundation (DFG) through the European M-ERA.NET project “FaSS” (Fatigue Simulation near Surfaces) under the grant numbers GA.014.13 N and SCHW855/5-1, respectively, is gratefully acknowledged. V. Samaee also acknowledges the FWO research project G012012N “Understanding nanocrystalline mechanical behaviour from structural investigations”. H. Idrissi is mandated by the Belgian National Fund for Scientific Research (FSR-FNRS). Dr. Ruth Schwaiger is acknowledged for providing the Ni foils used to prepare the in-situ TEM tensile specimens. Approved Most recent IF: 4.259
Call Number EMAT @ emat @c:irua:155772 Serial 5136
Permanent link to this record
 
 
Author Idrissi, H.; Ghidelli, M.; Béché, A.; Turner, S.; Gravier, S.; Blandin, J.-J.; Raskin, J.-P.; Schryvers, D.; Pardoen, T.
Title Atomic-scale viscoplasticity mechanisms revealed in high ductility metallic glass films Type A1 Journal article
Year 2019 Publication (down) Scientific reports Abbreviated Journal Sci Rep-Uk
Volume 9 Issue 1 Pages 13426
Keywords A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
Abstract The fundamental plasticity mechanisms in thin freestanding Zr65Ni35 metallic glass films are investigated in order to unravel the origin of an outstanding strength/ductility balance. The deformation process is homogenous until fracture with no evidence of catastrophic shear banding. The creep/relaxation behaviour of the films was characterized by on-chip tensile testing, revealing an activation volume in the range 100–200 Å3. Advanced high-resolution transmission electron microscopy imaging and spectroscopy exhibit a very fine glassy nanostructure with well-defined dense Ni-rich clusters embedded in Zr-rich clusters of lower atomic density and a ~2–3 nm characteristic length scale. Nanobeam electron diffraction analysis reveals that the accumulation of plastic deformation at roomtemperature

correlates with monotonously increasing disruption of the local atomic order. These results provide experimental evidences of the dynamics of shear transformation zones activation in metallic glasses. The impact of the nanoscale structural heterogeneities on the mechanical properties including the rate dependent behaviour is discussed, shedding new light on the governing plasticity mechanisms in metallic glasses with initially heterogeneous atomic arrangement.
Address
Corporate Author Thesis
Publisher Place of Publication Editor
Language Wos 000486139700008 Publication Date 2019-09-17
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 2045-2322 ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 4.259 Times cited Open Access
Notes H. Idrissi is mandated by the Belgian National Fund for Scientific Research (FSR-FNRS). This work was supported by the FNRS under Grant PDR – T.0178.19. FWO project G093417N (‘Compressed sensing enabling low dose imaging in transmission electron microscopy’) and Hercules fund ‘Direct electron detector for soft matter TEM’ from Flemish Government are acknowledged. Approved Most recent IF: 4.259
Call Number EMAT @ emat @c:irua:162786 Serial 5375
Permanent link to this record
 
 
Author Van Cauwenbergh, P.; Samaee, V.; Thijs, L.; Nejezchlebova, J.; Sedlak, P.; Ivekovic, A.; Schryvers, D.; Van Hooreweder, B.; Vanmeensel, K.
Title Unravelling the multi-scale structure-property relationship of laser powder bed fusion processed and heat-treated AlSi10Mg Type A1 Journal article
Year 2021 Publication (down) Scientific Reports Abbreviated Journal Sci Rep-Uk
Volume 11 Issue 1 Pages 6423
Keywords A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
Abstract Tailoring heat treatments for Laser Powder Bed Fusion (LPBF) processed materials is critical to ensure superior and repeatable material properties for high-end applications. This tailoring requires in-depth understanding of the LPBF-processed material. Therefore, the current study aims at unravelling the threefold interrelationship between the process (LPBF and heat treatment), the microstructure at different scales (macro-, meso-, micro-, and nano-scale), and the macroscopic material properties of AlSi10Mg. A similar solidification trajectory applies at different length scales when comparing the solidification of AlSi10Mg, ranging from mould-casting to rapid solidification (LPBF). The similarity in solidification trajectories triggers the reason why the Brody-Flemings cellular microsegregation solidification model could predict the cellular morphology of the LPBF as-printed microstructure. Where rapid solidification occurs at a much finer scale, the LPBF microstructure exhibits a significant grain refinement and a high degree of silicon (Si) supersaturation. This study has identified the grain refinement and Si supersaturation as critical assets of the as-printed microstructure, playing a vital role in achieving superior mechanical and thermal properties during heat treatment. Next, an electrical conductivity model could accurately predict the Si solute concentration in LPBF-processed and heat-treated AlSi10Mg and allows understanding the microstructural evolution during heat treatment. The LPBF-processed and heat-treated AlSi10Mg conditions (as-built (AB), direct-aged (DA), stress-relieved (SR), preheated (PH)) show an interesting range of superior mechanical properties (tensile strength: 300-450 MPa, elongation: 4-13%) compared to the mould-cast T6 reference condition.
Address
Corporate Author Thesis
Publisher Place of Publication Editor
Language Wos 000632047000003 Publication Date 2021-03-19
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 2045-2322 ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 4.259 Times cited Open Access OpenAccess
Notes Approved Most recent IF: 4.259
Call Number UA @ admin @ c:irua:177634 Serial 6791
Permanent link to this record
 
 
Author Schryvers, D.; Cao, S.; Tirry, W.; Idrissi, H.; Van Aert, S.
Title Advanced three-dimensional electron microscopy techniques in the quest for better structural and functional materials Type A1 Journal article
Year 2013 Publication (down) Science and technology of advanced materials Abbreviated Journal Sci Technol Adv Mat
Volume 14 Issue 1 Pages 014206-14213
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract After a short review of electron tomography techniques for materials science, this overview will cover some recent results on different shape memory and nanostructured metallic systems obtained by various three-dimensional (3D) electron imaging techniques. In binary NiTi, the 3D morphology and distribution of Ni4Ti3 precipitates are investigated by using FIB/SEM slice-and-view yielding 3D data stacks. Different quantification techniques will be presented including the principal ellipsoid for a given precipitate, shape classification following a Zingg scheme, particle distribution function, distance transform and water penetration. The latter is a novel approach to quantifying the expected matrix transformation in between the precipitates. The different samples investigated include a single crystal annealed with and without compression yielding layered and autocatalytic precipitation, respectively, and a polycrystal revealing different densities and sizes of the precipitates resulting in a multistage transformation process. Electron tomography was used to understand the interaction between focused ion beam-induced Frank loops and long dislocation structures in nanobeams of Al exhibiting special mechanical behaviour measured by on-chip deposition. Atomic resolution electron tomography is demonstrated on Ag nanoparticles in an Al matrix.
Address
Corporate Author Thesis
Publisher Place of Publication Sendai Editor
Language Wos 000316463800008 Publication Date 2013-03-13
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1468-6996;1878-5514; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 3.798 Times cited 6 Open Access
Notes Fwo; Iap; Esteem Approved Most recent IF: 3.798; 2013 IF: 2.613
Call Number UA @ lucian @ c:irua:107343 Serial 77
Permanent link to this record
 
 
Author Idrissi, H.; Bollinger, C.; Boioli, F.; Schryvers, D.; Cordier, P.
Title Low-temperature plasticity of olivine revisited with in situ TEM nanomechanical testing Type A1 Journal article
Year 2016 Publication (down) Science Advances Abbreviated Journal
Volume 2 Issue 2 Pages e1501671-e1501671
Keywords A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
Abstract The rheology of the lithospheric mantle is fundamental to understanding how mantle convection couples with plate tectonics. However, olivine rheology at lithospheric conditions is still poorly understood because experiments are difficult in this temperature range where rocks and mineral become very brittle. We combine techniques of quantitative in situ tensile testing in a transmission electron microscope and numerical modeling of dislocation dynamics to constrain the low-temperature rheology of olivine. We find that the intrinsic ductility of olivine at low temperature is significantly lower than previously reported values, which were obtained under strain-hardened conditions. Using this method, we can anchor rheological laws determined at higher temperature and can provide a better constraint on intermediate temperatures relevant for the lithosphere. More generally, we demonstrate the possibility of characterizing the mechanical properties of specimens, which can be available in the form of submillimeter-sized particles only.
Address
Corporate Author Thesis
Publisher Place of Publication Editor
Language Wos 000379620200043 Publication Date 2016-03-12
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 2375-2548 ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor Times cited 32 Open Access
Notes Approved Most recent IF: NA
Call Number UA @ lucian @ c:irua:134983 Serial 4202
Permanent link to this record
 
 
Author Schryvers, D.
Title Experimental studies on precursor phenomena in displacive phase transformations Type P1 Proceeding
Year 1997 Publication (down) Properties Of Complex Inorganic Solids Abbreviated Journal
Volume Issue Pages 321-332
Keywords P1 Proceeding; Electron microscopy for materials research (EMAT)
Abstract
Address
Corporate Author Thesis
Publisher Place of Publication Editor
Language Wos A1997BJ04L00041 Publication Date 0000-00-00
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 0-306-45606-0 ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor Times cited 1 Open Access
Notes Approved Most recent IF: NA
Call Number UA @ lucian @ c:irua:104380 Serial 1142
Permanent link to this record
 
 
Author Tian, H.; Schryvers, D.; Claeys, P.
Title Nanodiamonds do not provide unique evidence for a Younger Dryas impact Type A1 Journal article
Year 2011 Publication (down) Proceedings of the National Academy of Sciences of the United States of America Abbreviated Journal P Natl Acad Sci Usa
Volume 108 Issue 1 Pages 40-44
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract Microstructural, δ13C isotope and C/N ratio investigations were conducted on excavated material from the black Younger Dryas boundary in Lommel, Belgium, aiming for a characterisation of the carbon content and structures. Cubic diamond nanoparticles are found in large numbers. The larger ones with diameters around or above 10 nm often exhibit single or multiple twins. The smaller ones around 5 nm in diameter are mostly defect-free. Also larger flake-like particles, around 100 nm in lateral dimension, with a cubic diamond structure are observed as well as large carbon onion structures. The combination of these characteristics does not yield unique evidence for an exogenic impact related to the investigated layer.
Address
Corporate Author Thesis
Publisher Place of Publication Washington, D.C. Editor
Language Wos 000285915000012 Publication Date 2010-12-21
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 0027-8424;1091-6490; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 9.661 Times cited 32 Open Access
Notes Approved Most recent IF: 9.661; 2011 IF: 9.681
Call Number UA @ lucian @ c:irua:88733 Serial 2254
Permanent link to this record
 
 
Author Schryvers, D.; van Landuyt, J.T.
Title Electron microscopy study of twin sequences and branching in Ni66Al34 3r martensite Type P1 Proceeding
Year 1993 Publication (down) Proceedings Of The International Conference On Martensitic Transformations (icomat-92) Abbreviated Journal
Volume Issue Pages 263-268
Keywords P1 Proceeding; Engineering sciences. Technology; Electron microscopy for materials research (EMAT)
Abstract
Address
Corporate Author Thesis
Publisher Place of Publication Editor
Language Wos A1993BD05K00039 Publication Date 0000-00-00
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor Times cited 1 Open Access
Notes Approved no
Call Number UA @ lucian @ c:irua:104492 Serial 975
Permanent link to this record
 
 
Author Peirs, J.; Verleysen, P.; Tirry, W.; Rabet, L.; Schryvers, D.; Degrieck, J.
Title Dynamic shear localization in Ti6Al4V Type P1 Proceeding
Year 2011 Publication (down) Procedia Engineering T2 – 11th International Conference on the Mechanical Behavior of Materials, (ICM), 2011, Como, ITALY (ICM11) Abbreviated Journal
Volume Issue Pages 1-6
Keywords P1 Proceeding; Electron microscopy for materials research (EMAT)
Abstract The alloy Ti6Al4V is known to be prone to the formation of adiabatic shear bands when dynamically loaded in shear. This causes a catastrophic decrease of the load carrying capacity and is usually followed by fracture. Although, the main mechanism is recognized to be the competition between strain hardening and thermal softening, a detailed understanding of the role of microstructural plasticity mechanisms and macroscopic loading conditions does not exist yet. To study strain localization and shear fracture, different high strain rate shear tests have been carried out: compression of hat-shaped specimens, torsion of thin walled tubular specimens and in-plane shear tests. The value of the three techniques in studying shear localization is evaluated. Post-mortem analysis of the fracture surface and the materials' microstructure is performed with optical and electron microscopy. In all cases a ductile fracture is observed. SEM and TEM techniques are used to study the local microstructure and composition in the shear band and as such the driving mechanism for the ASB formation. (C) 2011 Published by Elsevier Ltd. Selection and/or peer-review under responsibility of ICM11
Address
Corporate Author Thesis
Publisher Place of Publication Editor
Language Wos 000300451302060 Publication Date 2011-06-20
Series Editor Series Title Abbreviated Series Title
Series Volume 10 Series Issue Edition
ISSN 1877-7058; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor Times cited 4 Open Access
Notes Approved Most recent IF: NA
Call Number UA @ lucian @ c:irua:113069 Serial 767
Permanent link to this record