Records |
Author |
Tian, H.; Schryvers, D.; Mohanchandra, K.P.; Carman, G.P.; van Humbeeck, J. |
Title |
Fabrication and characterization of functionally graded Ni-Ti multilayer thin films |
Type |
A1 Journal article |
Year |
2009 |
Publication |
Functional materials letters |
Abbreviated Journal |
Funct Mater Lett |
Volume |
2 |
Issue |
2 |
Pages |
61-66 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
A functionally graded multilayer NiTi thin film was deposited on a SiO2/Si substrate by d.c. sputtering using a ramped heated NiTi alloy target. The stand-alone films were crystallized at 500°C in vacuum better than 10-7 Torr. Transmission electron microscopy micrographs taken along the film cross section show two distinct regions, thin and thick, with weak R and B2 phases, respectively. The film compositions along the thickness were measured and quantified using the standard-less EELSMODEL method. The film deposited during the initial thermal ramp (thin regions) displays an average of 54 at.% Ni while the film deposited at a more elevated target temperature (thick regions) shows about 51 at.% Ni. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
000271077000003 |
Publication Date |
2009-07-22 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1793-6047;1793-7213; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
1.234 |
Times cited |
9 |
Open Access |
|
Notes |
Fwo |
Approved |
Most recent IF: 1.234; 2009 IF: 2.561 |
Call Number |
UA @ lucian @ c:irua:77655 |
Serial |
1165 |
Permanent link to this record |
|
|
|
Author |
Malard, B.; Pilch, J.; Sittner, P.; Gartnerova, V.; Delville, R.; Schryvers, D.; Curfs, C. |
Title |
Microstructure and functional property changes in thin Ni-Ti wires heat teated by electric current: high energy X-ray and TEM investigations |
Type |
A1 Journal article |
Year |
2009 |
Publication |
Functional materials letters |
Abbreviated Journal |
Funct Mater Lett |
Volume |
2 |
Issue |
2 |
Pages |
45-54 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
High energy synchrotron X-ray diffraction, transmission electron microscopy and mechanical testing were employed to investigate the evolution of microstructure, texture and functional superelastic properties of 0.1 mm thin as drawn NiTi wires subjected to a nonconventional heat treatment by controlled electric current (FTMT-EC method). As drawn NiTi wires were prestrained in tension and exposed to a sequence of short DC power pulses in the millisecond range. The annealing time in the FTMT-EC processing can be very short but the temperature and force could be very high compared to the conventional heat treatment of SMAs. It is shown that the heavily strained, partially amorphous microstructure of the as drawn NiTi wire transforms under the effect of the DC pulse and tensile stress into a wide range of annealed nanosized microstructures depending on the pulse time. The functional superelastic properties and microstructures of the FTMT-EC treated NiTi wire are comparable to those observed in straight annealed wires. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
000271077000001 |
Publication Date |
2009-07-22 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1793-6047;1793-7213; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
1.234 |
Times cited |
21 |
Open Access |
|
Notes |
Multimat |
Approved |
Most recent IF: 1.234; 2009 IF: 2.561 |
Call Number |
UA @ lucian @ c:irua:77656 |
Serial |
2052 |
Permanent link to this record |
|
|
|
Author |
Pourbabak, S.; Wang, X.; Van Dyck, D.; Verlinden, B.; Schryvers, D. |
Title |
Ni cluster formation in low temperature annealed Ni50.6Ti49.4 |
Type |
A1 Journal article |
Year |
2017 |
Publication |
Functional materials letters |
Abbreviated Journal |
Funct Mater Lett |
Volume |
10 |
Issue |
10 |
Pages |
1740005 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab |
Abstract |
Various low temperature treatments of Ni50.6Ti49.4 have shown an unexpected effect on the martensitic start temperature. Periodic diffuse intensity distributions in reciprocal space indicate the formation of short pure Ni strings along the <111> directions in the B2 ordered lattice, precursing the formation of Ni4Ti3 precipitates formed at higher annealing temperatures. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
000395164100006 |
Publication Date |
2017-01-10 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1793-6047 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
1.234 |
Times cited |
4 |
Open Access |
Not_Open_Access |
Notes |
The authors like to thank the Flemish Science Foundation FWO for financial support under project G.0366.15N “Influence of nano- and microstructural features and defects in fine-grained Ni-Ti on the thermal and mechanical reversibility of the martensitic transformation and the shape memory and superelastic behavior”. We are also very grateful to Prof. Dr. Jan Van Humbeeck for initiating this work, for his continuous support and inspiring discussions. |
Approved |
Most recent IF: 1.234 |
Call Number |
EMAT @ emat @ c:irua:142545 |
Serial |
4619 |
Permanent link to this record |
|
|
|
Author |
Razdobarin, A.G.; Mukhin, E.E.; Semenov, V.V.; Tolstyakov, S.Y.; Kochergin, M.M.; Kurskiev, G.S.; Podushnikova, K.A.; Kirilenko, D.A.; Sitnikova, A.A.; Konovalov, V.G.; Solodovchenko, S.I.; Nekhaieva, O.M.; Skorik, O.A.; Bondarenko, V.N.; Voitsenya, V.S.; |
Title |
Diagnostic mirrors with transparent protection layer for ITER |
Type |
A1 Journal article |
Year |
2011 |
Publication |
Fusion engineering and design |
Abbreviated Journal |
Fusion Eng Des |
Volume |
86 |
Issue |
6-8 |
Pages |
1341-1344 |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
Abstract |
Fast degradation of in-vessel optics is one of the most serious problems for all optical diagnostics in ITER. To provide the resistance to mechanical and thermal stresses along with a high stability of optical characteristics under deposition-dominated conditions we suggest using high-reflective metallic (Ag or Al) film mirrors coated on silicon substrate and protected with thin oxide film in the divertor Thomson Scattering (TS) diagnostics. The mirrors coated with Al2O3 and ZrO2 films were tested under irradiation by deuterium ions. The experimental results on the oxide films sputtering are discussed in the context of their applicability for the first mirror protection in ITER. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
Elsevier science sa |
Place of Publication |
Amsterdam |
Editor |
|
Language |
|
Wos |
000297426500203 |
Publication Date |
2011-03-17 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0920-3796; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
1.319 |
Times cited |
6 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 1.319; 2011 IF: 1.490 |
Call Number |
UA @ lucian @ c:irua:93631 |
Serial |
686 |
Permanent link to this record |
|
|
|
Author |
De Schouwer, F.; Claes, L.; Claes, N.; Bals, S.; Degrève, J.; De Vos, D.E. |
Title |
Pd-catalyzed decarboxylation of glutamic acid and pyroglutamic acid to bio-based 2-pyrrolidone |
Type |
A1 Journal article |
Year |
2015 |
Publication |
Green chemistry : cutting-edge research for a greener sustainable future |
Abbreviated Journal |
Green Chem |
Volume |
17 |
Issue |
17 |
Pages |
2263-2270 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
In order to recycle nitrogen from nitrogen-rich waste streams, particularly protein waste, we studied the decarboxylation of pyroglutamic acid and glutamic acid in a one-pot reaction to bio-based 2-pyrrolidone. After the screening of a wide range of supported Pd and Pt catalysts, 5 wt% Pd/Al2O3 displayed the highest yield (70%) and selectivity (81%) for the decarboxylation of pyroglutamic acid in water at 250 °C and under an inert atmosphere. Side products originate from consecutive reactions of 2-pyrrolidone; different reaction pathways are proposed to explain the presence of degradation products like propionic acid, γ-hydroxybutyric acid, γ-butyrolactone and methylamine. An extensive study of the reaction parameters was performed to check their influence on selectivity and conversion. This heterogeneous catalytic system was successfully extended to the conversion of glutamic acid. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
London |
Editor |
|
Language |
|
Wos |
000352724200027 |
Publication Date |
2015-02-17 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1463-9262;1463-9270; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
9.125 |
Times cited |
47 |
Open Access |
OpenAccess |
Notes |
335078 Colouratom; ECAS_Sara; (ROMEO:yellow; preprint:; postprint:restricted ; pdfversion:cannot); |
Approved |
Most recent IF: 9.125; 2015 IF: 8.020 |
Call Number |
c:irua:125378 |
Serial |
2564 |
Permanent link to this record |
|
|
|
Author |
Windels, S.; Diefenhardt, T.; Jain, N.; Marquez, C.; Bals, S.; Schlummer, M.; De Vos, D.E. |
Title |
Catalytic upcycling of PVC waste-derived phthalate esters into safe, hydrogenated plasticizers |
Type |
A1 Journal article |
Year |
2022 |
Publication |
Green chemistry : cutting-edge research for a greener sustainable future |
Abbreviated Journal |
Green Chem |
Volume |
24 |
Issue |
2 |
Pages |
754-766 |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
Abstract |
Recycling of end-of-life polyvinyl chloride (PVC) calls for solutions to deal with the vast amounts of harmful phthalate plasticizers that have historically been incorporated in PVC. Here, we report on the upcycling of such waste-extracted phthalate esters into analogues of the much safer diisononyl 1,2-cyclohexanedicarboxylate plasticizer (DINCH), via a catalytic one-pot (trans)esterification-hydrogenation process. For most of the virgin phthalates, Ru/Al2O3 is a highly effective hydrogenation catalyst, yielding >99% ring-hydrogenated products under mild reaction conditions (0.1 mol% Ru, 80 degrees C, 50 bar H-2). However, applying this reaction to PVC-extracted phthalates proved problematic, (1) as benzyl phthalates are hydrogenolyzed to benzoic acids that inhibit the Ru-catalyst, and (2) because impurities in the plasticizer extract (PVC, sulfur) further retard the hydrogenation. These complications were solved by coupling the hydrogenation to an in situ (trans)esterification with a higher alcohol, and by pretreating the extract with an activated carbon adsorbent. In this way, a real phthalate extract obtained from post-consumer PVC waste was eventually completely (>99%) hydrogenated to phthalate-free, cycloaliphatic plasticizers. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
000726865200001 |
Publication Date |
2021-11-30 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1463-9262; 1463-9270 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
9.8 |
Times cited |
8 |
Open Access |
Not_Open_Access |
Notes |
This project has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under grant agreement no. 821366 (programma acronym: Circular Flooring). D. E. D. V. thanks FWO for project funding (SBO project S001819N Triple Cycle); N. J. and S. B. acknowledge the financial support from FWO and FNRS (EOS 30489208). Finally, the authors also thank S. Smolders for assistance with the TGA-MS experiments and D. Paredaens for his experimental contribution |
Approved |
Most recent IF: 9.8 |
Call Number |
UA @ admin @ c:irua:184746 |
Serial |
6958 |
Permanent link to this record |
|
|
|
Author |
Vlasov, E.; Denisov, N.; Verbeeck, J. |
Title |
Low-cost electron detector for scanning electron microscope |
Type |
A1 Journal article |
Year |
2023 |
Publication |
HardwareX |
Abbreviated Journal |
HardwareX |
Volume |
14 |
Issue |
|
Pages |
e00413 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
Electron microscopy is an indispensable tool for the characterization of (nano) materials. Electron microscopes are typically very expensive and their internal operation is often shielded from the user. This situation can provide fast and high quality results for researchers focusing on e.g. materials science if they have access to the relevant instruments. For researchers focusing on technique development, wishing to test novel setups, however, the high entry price can lead to risk aversion and deter researchers from innovating electron microscopy technology further. The closed attitude of commercial entities about how exactly the different parts of electron microscopes work, makes it even harder for newcomers in this field. Here we propose an affordable, easy-to-build electron detector for use in a scanning electron microscope (SEM). The aim of this project is to shed light on the functioning of such detectors as well as show that even a very modest design can lead to acceptable performance while providing high flexibility for experimentation and customization. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
001042486000001 |
Publication Date |
2023-03-10 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
2468-0672 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
|
Times cited |
1 |
Open Access |
OpenAccess |
Notes |
The authors acknowledge the financial support of the Research Foundation Flanders (FWO, Belgium) project SBO [Grant No. S000121N]. JV acknowledges funding from the HORIZON-INFRA-2022-TECH-01-01 project IMPRESS [Grant No. 101094299]. |
Approved |
Most recent IF: NA |
Call Number |
EMAT @ emat @c:irua:195886 |
Serial |
7252 |
Permanent link to this record |
|
|
|
Author |
Beckwee, E.J.; Watson, G.; Houlleberghs, M.; Arenas Esteban, D.; Bals, S.; Van Der Voort, P.; Breynaert, E.; Martens, J.; Baron, G.V.; Denayer, J.F.M. |
Title |
Enabling hydrate-based methane storage under mild operating conditions by periodic mesoporous organosilica nanotubes |
Type |
A1 Journal article |
Year |
2023 |
Publication |
Heliyon |
Abbreviated Journal |
|
Volume |
9 |
Issue |
7 |
Pages |
e17662-14 |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
Abstract |
Biomethane is a renewable natural gas substitute produced from biogas. Storage of this sustainable energy vector in confined clathrate hydrates, encapsulated in the pores of a host material, is a highly promising avenue to improve storage capacity and energy efficiency. Herein, a new type of periodic mesoporous organosilica (PMO) nanotubes, referred to as hollow ring PMO (HR-PMO), capable of promoting methane clathrate hydrate formation under mild working conditions (273 K, 3.5 MPa) and at high water loading (5.1 g water/g HR-PMO) is reported. Gravimetric uptake measurements reveal a steep single-stepped isotherm and a noticeably high methane storage capacity (0.55 g methane/g HR-PMO; 0.11 g methane/g water at 3.5 MPa). The large working capacity throughout consecutive pressure-induced clathrate hydrate formationdissociation cycles demonstrates the material's excellent recyclability (97% preservation of capacity). Supported by ex situ cryo-electron tomography and x-ray diffraction, HR-PMO nanotubes are hypothesized to promote clathrate hydrate nucleation and growth by distribution and confinement of water in the mesopores of their outer wall, along the central channels of the nanotubes and on the external nanotube surface. These findings showcase the potential for application of organosilica materials with hierarchical and interconnected pore systems for pressure-based storage of biomethane in confined clathrate hydrates. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
001056264100001 |
Publication Date |
2023-06-28 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
2405-8440 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
|
Times cited |
4 |
Open Access |
OpenAccess |
Notes |
E.J.B., G.W. and M.H. contributed equally to this work. M.H. acknowledges FWO for an FWO-SB fellowship. All authors acknowledge VLAIO for Moonshot funding (ARCLATH, n ? HBC.2019.0110, ARCLATH2, n ? HBC.2021.0254) . J.A.M. acknowledges the Flemish Government for long-term structural funding (Methusalem) and department EWI for infrastructure investment via the Hermes Fund (AH.2016.134) . NMRCoRe acknowledges the Flemish government, department EWI for financial support as International Research Infrastructure (I001321N: Nuclear Magnetic Resonance Spectroscopy Platform for Molecular Water Research) . J.A.M. acknowledges the European Research Council (ERC) for an Advanced Research Grant under the European Union's Horizon 2020 research and innovation program under grant agreement No. 834134 (WATUSO) . S.B acknowledges financial support by the Research Foundation Flanders (FWO grant G.0381.16N) . This project also received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 731019 (EUSMI) and No 815128 (REALNANO) . |
Approved |
Most recent IF: NA |
Call Number |
UA @ admin @ c:irua:199249 |
Serial |
8862 |
Permanent link to this record |
|
|
|
Author |
Van Tendeloo, G.; Hervieu, M.; Chaillout, C. |
Title |
Defect structure of Hg-based ceramic superconductors |
Type |
A3 Journal article |
Year |
1994 |
Publication |
Icem |
Abbreviated Journal |
|
Volume |
13 |
Issue |
|
Pages |
949-952 |
Keywords |
A3 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
|
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
|
Publication Date |
0000-00-00 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
|
ISBN |
|
Additional Links |
UA library record |
Impact Factor |
|
Times cited |
|
Open Access |
|
Notes |
|
Approved |
no |
Call Number |
UA @ lucian @ c:irua:10050 |
Serial |
620 |
Permanent link to this record |
|
|
|
Author |
De Meulenaere, P.; Van Tendeloo, G.; van Landuyt, J. |
Title |
Direct observation of clusters in some FCC alloys by HREM |
Type |
A1 Journal article |
Year |
1994 |
Publication |
Icem |
Abbreviated Journal |
|
Volume |
13 |
Issue |
|
Pages |
447-448 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
|
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
A1994BE09X00207 |
Publication Date |
0000-00-00 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
|
ISBN |
|
Additional Links |
UA library record; WoS full record; |
Impact Factor |
|
Times cited |
|
Open Access |
|
Notes |
|
Approved |
no |
Call Number |
UA @ lucian @ c:irua:10052 |
Serial |
716 |
Permanent link to this record |
|
|
|
Author |
Goessens, C.; Schryvers, D.; van Dyck, D.; van Landuyt, J.; de Keyzer, R. |
Title |
Electron diffraction evidence for ordering of interstitial silver ions in silver bromide microcrystals |
Type |
A1 Journal article |
Year |
1994 |
Publication |
Icem |
Abbreviated Journal |
|
Volume |
13 |
Issue |
|
Pages |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab |
Abstract |
|
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
A1994BC23W00081 |
Publication Date |
0000-00-00 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
|
ISBN |
|
Additional Links |
UA library record; WoS full record; |
Impact Factor |
|
Times cited |
|
Open Access |
|
Notes |
|
Approved |
no |
Call Number |
UA @ lucian @ c:irua:10058 |
Serial |
918 |
Permanent link to this record |
|
|
|
Author |
Buschmann, V.; Schryvers, D.; van Landuyt, J.; van Roost, C. |
Title |
EM study of sensitisation of silver halide grains |
Type |
A1 Journal article |
Year |
1994 |
Publication |
Icem |
Abbreviated Journal |
|
Volume |
13 |
Issue |
|
Pages |
|
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
|
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
A1994BE09Y00185 |
Publication Date |
0000-00-00 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
|
ISBN |
|
Additional Links |
UA library record; WoS full record; |
Impact Factor |
|
Times cited |
|
Open Access |
|
Notes |
|
Approved |
CHEMISTRY, PHYSICAL 77/144 Q3 # MATHEMATICS, INTERDISCIPLINARY 19/101 Q1 # PHYSICS, ATOMIC, MOLECULAR & CHEMICAL 17/35 Q2 # |
Call Number |
UA @ lucian @ c:irua:10607 |
Serial |
1030 |
Permanent link to this record |
|
|
|
Author |
Domengès, B.; Caldes, M.T.; Hervieu, M.; Van Tendeloo, G.; Raveau, B. |
Title |
HREM characterization of substituted orthorhombic and monoclinic tubular phases |
Type |
A3 Journal article |
Year |
1994 |
Publication |
Icem |
Abbreviated Journal |
|
Volume |
13 |
Issue |
|
Pages |
963-964 |
Keywords |
A3 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
|
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
|
Publication Date |
0000-00-00 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
|
ISBN |
|
Additional Links |
UA library record |
Impact Factor |
|
Times cited |
|
Open Access |
|
Notes |
|
Approved |
no |
Call Number |
UA @ lucian @ c:irua:10055 |
Serial |
1498 |
Permanent link to this record |
|
|
|
Author |
Schryvers, D.; Van Tendeloo, G.; van Landuyt, J.; Tanner, L.E. |
Title |
HREM imaging analysis in the study of pretransition and nucleation phenomena in alloys |
Type |
A3 Journal article |
Year |
1994 |
Publication |
Icem |
Abbreviated Journal |
|
Volume |
13 |
Issue |
|
Pages |
659-662 |
Keywords |
A3 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
|
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
|
Publication Date |
0000-00-00 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
|
ISBN |
|
Additional Links |
UA library record |
Impact Factor |
|
Times cited |
|
Open Access |
|
Notes |
|
Approved |
no |
Call Number |
UA @ lucian @ c:irua:10051 |
Serial |
1501 |
Permanent link to this record |
|
|
|
Author |
Bernaerts, D.; Zhang, X.B.; Zhang, X.F.; Van Tendeloo, G.; van Landuyt, J.; Amelinckx, S. |
Title |
HREM study of Rb6C60 and helical carbon nanotubules |
Type |
A3 Journal article |
Year |
1994 |
Publication |
Icem |
Abbreviated Journal |
|
Volume |
13 |
Issue |
|
Pages |
305-306 |
Keywords |
A3 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
|
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
|
Publication Date |
0000-00-00 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
|
ISBN |
|
Additional Links |
UA library record |
Impact Factor |
|
Times cited |
|
Open Access |
|
Notes |
|
Approved |
COMPUTER SCIENCE, INTERDISCIPLINARY 11/104 Q1 # PHYSICS, MATHEMATICAL 1/53 Q1 # |
Call Number |
UA @ lucian @ c:irua:10056 |
Serial |
1514 |
Permanent link to this record |
|
|
|
Author |
Milat, O.; Krekels, T.; Van Tendeloo, G.; Amelinckx, S. |
Title |
The “oblique” zone imaging of the superlattice in complex crystal structure |
Type |
A3 Journal article |
Year |
1994 |
Publication |
Icem |
Abbreviated Journal |
|
Volume |
13 |
Issue |
|
Pages |
859-860 |
Keywords |
A3 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
|
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
|
Publication Date |
0000-00-00 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
|
ISBN |
|
Additional Links |
UA library record |
Impact Factor |
|
Times cited |
|
Open Access |
|
Notes |
|
Approved |
MATERIALS SCIENCE, MULTIDISCIPLINARY 135/271 Q2 # PHYSICS, APPLIED 70/145 Q2 # PHYSICS, CONDENSED MATTER 40/67 Q3 # |
Call Number |
UA @ lucian @ c:irua:10054 |
Serial |
2413 |
Permanent link to this record |
|
|
|
Author |
Weill, F.; Fompeyrine, J.; Darriet, B.; Darriet, J.; Bontchev, R.; Amelinckx, S.; Van Tendeloo, G. |
Title |
Structural considerations on LanTin-\deltaO3n |
Type |
A3 Journal article |
Year |
1994 |
Publication |
Icem |
Abbreviated Journal |
|
Volume |
13 |
Issue |
|
Pages |
903-904 |
Keywords |
A3 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
|
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
|
Publication Date |
0000-00-00 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
|
ISBN |
|
Additional Links |
UA library record |
Impact Factor |
|
Times cited |
|
Open Access |
|
Notes |
|
Approved |
|
Call Number |
UA @ lucian @ c:irua:10057 |
Serial |
3228 |
Permanent link to this record |
|
|
|
Author |
Schryvers, D.; Van Landuyt, J. |
Title |
Electron microscopy study of twin sequences and branching in NissAl34 3R martensite |
Type |
A3 Journal Article |
Year |
1992 |
Publication |
ICOMAT |
Abbreviated Journal |
|
Volume |
|
Issue |
|
Pages |
|
Keywords |
A3 Journal Article; Electron Microscopy for Materials Science (EMAT) ; |
Abstract |
Microtwin sequences in Ni66Al34 martensite plates of different size were investigated by electron microscopy. Although mostly irregular sequences were observed an average twin width w can be determined which increases with twin length L following the expected relation w ~ sqrt(L). High resolution electron microscopy was used to study the twin branching close to the plate boundaries and an atomic model for the branching of a microtwin and the changes in twin thickness is suggested |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
|
Publication Date |
0000-00-00 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
|
ISBN |
|
Additional Links |
|
Impact Factor |
|
Times cited |
|
Open Access |
|
Notes |
|
Approved |
no |
Call Number |
EMAT @ emat @ |
Serial |
5054 |
Permanent link to this record |
|
|
|
Author |
Ranjbar, S.; Hadipour, A.; Vermang, B.; Batuk, M.; Hadermann, J.; Garud, S.; Sahayaraj, S.; Meuris, M.; Brammertz, G.; da Cunha, A.F.; Poortmans, J. |
Title |
P-N Junction Passivation in Kesterite Solar Cells by Use of Solution-Processed TiO2 Layer |
Type |
A1 Journal article |
Year |
2017 |
Publication |
IEEE journal of photovoltaics |
Abbreviated Journal |
Ieee J Photovolt |
Volume |
7 |
Issue |
7 |
Pages |
1130-1135 |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
Abstract |
In this work, we used a solution-processed TiO2 layer between Cu2ZnSnSe4 and CdS buffer layer to reduce the recombination at the p–n junction. Introducing the TiO2 layer showed a positive impact on VOC but fill factor and efficiency decreased. Using a KCN treatment, we could create openings in the TiO2 layer, as confirmed by transmission electron microscopy measurements. Formation of these openings in the TiO2 layer led to the improvement of the short-circuit current, fill factor, and the efficiency of the modified solar cells. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
000404258900026 |
Publication Date |
2017-04-25 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
2156-3381 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
3.712 |
Times cited |
2 |
Open Access |
OpenAccess |
Notes |
This work was supported in part by the European Union’s Horizon 2020 research and innovation program under Grant 640868, in part by the Flemish government, Department Economy, Science and Innovation, in part by the FEDER funds through the COMPETE 2020 Programme, and in part by the National Funds through FCT – Portuguese Foundation for Science and Technology under the project UID/CTM/50025/2013. The work of S. Ranjbar was supported by the Portuguese Science and Technology Foundation through Ph.D. grant SFRH/BD/78409/2011. The work of B. Vermang was supported by the Flemish Research Foundation FWO (mandate 12O4215N). |
Approved |
Most recent IF: 3.712 |
Call Number |
EMAT @ emat @ c:irua:143986 |
Serial |
4583 |
Permanent link to this record |
|
|
|
Author |
Bals, S.; Van Tendeloo, G.; Rijnders, G.; Huijben, M.; Leca, V.; Blank, D.H.A. |
Title |
Transmission electron microscopy on interface engineered superconducting thin films |
Type |
A1 Journal article |
Year |
2003 |
Publication |
IEEE transactions on applied superconductivity |
Abbreviated Journal |
Ieee T Appl Supercon |
Volume |
13 |
Issue |
2:3 |
Pages |
2834-2837 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
Transmission electron microscopy is used to evaluate different deposition techniques, which optimize the microstructure and physical properties of superconducting thin films. High-resolution electron microscopy proves that the use of an YBa2Cu2Ox buffer layer can avoid a variable interface configuration in YBa2Cu3O7-delta thin films grown on SrTiO3. The growth can also be controlled at an atomic level by, using sub-unit cell layer epitaxy, which results in films with high quality and few structural defects. Epitaxial strain in Sr0.85La0.15CuO2 infinite layer thin films influences the critical temperature of these films, as well as the microstructure. Compressive stress is released by a modulated or a twinned microstructure, which eliminates superconductivity. On the other hand, also tensile strain seems to lower the critical temperature of the infinite layer. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
New York, N.Y. |
Editor |
|
Language |
|
Wos |
000184242400101 |
Publication Date |
2003-07-16 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1051-8223; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
|
Times cited |
13 |
Open Access |
|
Notes |
Iuap V-1; Fwo |
Approved |
Most recent IF: NA |
Call Number |
UA @ lucian @ c:irua:103292 |
Serial |
3712 |
Permanent link to this record |
|
|
|
Author |
Pahlke, P.; Lao, M.; Eisterer, M.; Meledin, A.; Van Tendeloo, G.; Hanisch, J.; Sieger, M.; Usoskin, A.; Stromer, J.; Holzapfel, B.; Schultz, L.; Huhne, R. |
Title |
Reduced Anisotropy and Enhanced In-Field Performance of Thick BaHfO3-Doped Films on ABAD-YSZ Templates |
Type |
A1 Journal article |
Year |
2016 |
Publication |
IEEE transactions on applied superconductivity |
Abbreviated Journal |
|
Volume |
26 |
Issue |
26 |
Pages |
1-4 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
Pure and 6 mol% BaHfO3 (BHO) doped YBa2Cu3O7-δ (YBCO) films were prepared on CeO2-buffered ABAD-YSZ templates by pulsed laser deposition. The self-field Jc at 77 K reaches 1.1 MA/cm² in the doped sample compared to 2.5 MA/cm² in pure YBCO, at a film thickness of around 1 μm. Above a magnetic field of 2.2 T along B||c, Jc of the BHO-doped sample exceeds the Jc of the undoped film. The maximum pinning force density (FP,max) reaches a value of around 3 GN/cm² for both samples, but B(FP,max) increases from 1.4 T (pure) to a value of 2.9 T (BHO:YBCO). The Jc anisotropy curves of the doped sample show a large and broad peak at B||c and a strongly reduced anisotropy at all temperatures and fields compared to the pure sample. A complex defect structure with YBa2Cu4O8 intergrowths, Y2O3 precipitates and BHO nanocolumns with a fanshaped structure is observed by TEM investigations, which can explain the measured Jc(B,θ) behavior. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
000376189700001 |
Publication Date |
2016-03-14 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1051-8223 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
|
Times cited |
14 |
Open Access |
|
Notes |
This work was supported by EUROTAPES, a collaborative project funded by the European Union’s Seventh Framework Program (FP7 / 2007 – 2013) under Grant Agreement n.280432. |
Approved |
Most recent IF: NA |
Call Number |
c:irua:133779 |
Serial |
4078 |
Permanent link to this record |
|
|
|
Author |
Sieger, M.; Pahlke, P.; Hanisch, J.; Sparing, M.; Bianchetti, M.; MacManus-Driscoll, J.; Lao, M.; Eisterer, M.; Meledin, A.; Van Tendeloo, G.; Nast, R.; Schultz, L.; Holzapfel, B.; Huhne, R. |
Title |
Ba2Y(Nb/Ta)O6–Doped YBCO Films on Biaxially Textured Ni–5at.% W Substrates |
Type |
A1 Journal article |
Year |
2016 |
Publication |
IEEE transactions on applied superconductivity |
Abbreviated Journal |
|
Volume |
26 |
Issue |
26 |
Pages |
1-5 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
The incorporation of nanoscaled pinning centers in superconducting YBa2Cu3O7-d (YBCO) films is one of the core topics to enhance the critical current density Jc(B, Q) of coated conductors. The mixed double-perovskite Ba2Y(Nb/Ta)O6 (BYNTO) can be grown in nanosized columns parallel the YBCO c-axis and in step-like patterns, making it customizable to meet specific working conditions (T, B, Q). We compare a 1.6 μm thick film of pure YBCO and a similar film with additional 5 mol% of BYNTO, grown by pulsed laser deposition with a growth rate of 1.6 nm/s on buffered biaxially textured Ni-5at.% W tape. Our doped sample shows nanosized BYNTO columns parallel cYBCO and plates in the ab-plane containing Y, Nb and Ta. An improved homogeneity of the critical current density Jc over the sample was evaluated from trapped field profiles measured with a scanning Hall probe microscope. The mean Jc in rolling direction of the tape is 1.8 MA/cm² (77 K, self-field) and doubles the value of the undoped sample. Angular dependent measurements of the critical current density, Jc(Q), show a decreased anisotropy of the doped film for various magnetic fields at 77 K as well as 64 K. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
000375581500001 |
Publication Date |
2016-03-08 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1051-8223 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
|
Times cited |
6 |
Open Access |
|
Notes |
This work was supported by EUROTAPES, a collaborative project funded by the European Commission’s Seventh Framework Program (FP7 / 2007 – 2013) under Grant Agreement n.280432. |
Approved |
Most recent IF: NA |
Call Number |
c:irua:133781 |
Serial |
4079 |
Permanent link to this record |
|
|
|
Author |
Sieger, M.; Pahlke, P.; Ottolinger, R.; Stafford, B.H.; Lao, M.; Meledin, A.; Bauer, M.; Eisterer, M.; Van Tendeloo, G.; Schultz, L.; Nielsch, K.; Hühne, R. |
Title |
Influence of substrate tilt angle on the incorporation of BaHfO3 in thick YBa2Cu3O7-δ films |
Type |
A1 Journal article |
Year |
2016 |
Publication |
IEEE transactions on applied superconductivity |
Abbreviated Journal |
|
Volume |
27 |
Issue |
27 |
Pages |
1-4 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
High critical current densities can be realized in high-temperature superconductors such as YBa2Cu3O7-δ (YBCO) by controlling density, shape, size and direction of a secondary phase. Whereas the dependence on the growth rate and deposition temperature has been widely studied as key parameters for nano-engineering the pinning landscape, the vicinal tilt of the substrate surface might have an additional influence. Therefore, we deposited 6 mol% BaHfO3 (BHO) doped YBCO on SrTiO3 (STO) substrates with vicinal angles α between 0° and 40° to identify the influence of the tilt on the growth mode of BHO. An undisturbed epitaxial growth of the superconductor as well as an epitaxial integration of the BHO phase in the YBCO matrix is observed for all vicinal angles investigated. The critical temperature is constant up to α = 20°, whereas the self-field critical current density at 77 K starts to decrease above 10°. A detailed structural analysis of the film cross sections showed that the growth mode of BHO changes already for a vicinal tilt of 2° from a pure c-axis oriented growth to a layered structure with BHO aligned parallel to the YBCO ab-plane. We identified a strong influence of such a microstructure on the current flow in BHO doped YBCO films on STO substrates as well as on MgO based coated conductors prepared by inclined substrate deposition |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
Institute of Electrical and Electronics Engineers (IEEE) |
Place of Publication |
|
Editor |
|
Language |
|
Wos |
000418469400001 |
Publication Date |
2016-11-22 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1051-8223 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
|
Times cited |
3 |
Open Access |
|
Notes |
This work was supported by EUROTAPES, a collaborative project funded by the European Commission’s Seventh Framework Program (FP7 / 2007 – 2013) under Grant Agreement n.280432.The authors would like to thank R. Nast, M. Reitner, M. Kühnel, U. Fiedler and J. Scheiter for technical assistance. |
Approved |
Most recent IF: NA |
Call Number |
EMAT @ emat @ Sieger_2016a c:irua:138603 |
Serial |
4317 |
Permanent link to this record |
|
|
|
Author |
Sieger, M.; Pahlke, P.; Lao, M.; Eisterer, M.; Meledin, A.; Van Tendeloo, G.; Ottolinger, R.; Haenisch, J.; Holzapfel, B.; Usoskin, A.; Kursumovic, A.; MacManus-Driscoll, J.L.; Stafford, B.H.; Bauer, M.; Nielsch, K.; Schultz, L.; Huehne, R. |
Title |
Tailoring microstructure and superconducting properties in thick BaHfO3 and Ba2YNb/Ta)O-6 doped YBCO films on technical templates |
Type |
A1 Journal article |
Year |
2017 |
Publication |
IEEE transactions on applied superconductivity |
Abbreviated Journal |
|
Volume |
27 |
Issue |
4 |
Pages |
6601407 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
The current transport capability of YBa2Cu3O7-x(YBCO) based coated conductors (CCs) is mainly limited by two features: the grain boundaries of the used textured template, which are transferred into the superconducting film through the buffer layers, and the ability to pin magnetic flux lines by incorporation of defined defects in the crystal lattice. By adjusting the deposition conditions, it is possible to tailor the pinning landscape in doped YBCO in order to meet specific working conditions (T, B) for CC applications. To study these effects, we deposited YBCO layers with a thickness of about 1-2 mu m using pulsed laser deposition on buffered rolling-assisted biaxially textured Ni-W substrates as well as on metal tapes having either an ion-beam-texturedYSZbuffer or an MgO layer textured by inclined substrate deposition. BaHfO3 and the mixed double-perovskite Ba2Y(Nb/Ta)O-6 were incorporated as artificial pinning centers in these YBCO layers. X-ray diffraction confirmed the epitaxial growth of the superconductor on these templates as well as the biaxially oriented incorporation of the secondary phase additions in the YBCO matrix. A critical current density J(c) of more than 2 MA/cm(2) was achieved at 77 K in self-field for 1-2 mu m thick films. Detailed TEM (transmission electron microscopy) studies revealed that the structure of the secondary phase can be tuned, forming c-axis aligned nanocolumns, ab-oriented platelets, or a combination of both. Transport measurements show that the J(c) anisotropy in magnetic fields is reduced by doping and the peak in the J(c) (theta) curves can be correlated to the microstructural features. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
New York, N.Y. |
Editor |
|
Language |
|
Wos |
000394588100001 |
Publication Date |
2016-12-24 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1051-8223 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
|
Times cited |
12 |
Open Access |
OpenAccess |
Notes |
; This work was supported by EUROTAPES, a collaborative project funded by the European Commission's Seventh Framework Program (FP7/2007-2013) under Grant Agreement no. 280432. ; |
Approved |
Most recent IF: NA |
Call Number |
UA @ lucian @ c:irua:141961 |
Serial |
4693 |
Permanent link to this record |
|
|
|
Author |
Roxana Vlad, V.; Bartolome, E.; Vilardell, M.; Calleja, A.; Meledin, A.; Obradors, X.; Puig, T.; Ricart, S.; Van Tendeloo, G.; Usoskin, A.; Lee, S.; Petrykin, V.; Molodyk, A. |
Title |
Inkjet printing multideposited YBCO on CGO/LMO/MgO/Y2O3/Al2O3/Hastelloy tape for 2G-coated conductors |
Type |
A1 Journal article |
Year |
2018 |
Publication |
IEEE transactions on applied superconductivity |
Abbreviated Journal |
|
Volume |
28 |
Issue |
4 |
Pages |
6601805 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
We present the preparation of a new architecture of coated conductor by Inkjet printing of low fluorine YBa2Cu3O7-x (YBCO) on top of SuperOx tape: CGO/LMO/IBAD-MgO/Y2O3/Al-2 O-3/Hastelloy. A five-layered multideposited, 475-nm-thick YBCO film was structurally and magnetically characterized. A good texture was achieved using this combination of buffer layers, requiring only a 30-nm-thin ion-beam-assisted deposition (IBAD)-MgO layer. The LF-YBCO CC reaches self-field critical current density values of J(c)(GB) similar to NJ 15.9 MA/cm(2) (5 K), similar to 1.23 MA/cm(2) (77 K) corresponding to an I-c (77 K) = 58.4 A/cm-width. Inkjet printing offers a flexible and cost effective method for YBCO deposition, allowing patterning of structures. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
New York, N.Y. |
Editor |
|
Language |
|
Wos |
000429010900001 |
Publication Date |
2018-02-22 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1051-8223 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
1.288 |
Times cited |
2 |
Open Access |
Not_Open_Access |
Notes |
; This work was performed within the framework of the EUROTAPES Project FP7-NMP.2011.2.2-1 under Grant280432, funded by the EU. ICMAB research was financed by the Ministry of Economy and Competitiveness, and FEDER funds under Projects MAT2011-28874-C02-01, MAT2014-51778-C2-1-R, ENE2014-56109-C3-3-R, and Consolider Nanoselect CSD2007-00041, and by Generalitat de Catalunya (2009 SGR 770, 2015 SGR 753, and Xarmae). ICMAB acknowledges support from Severo Ochoa Program (MINECO) under Grant SEV-2015-0496. ; |
Approved |
Most recent IF: NA |
Call Number |
UA @ lucian @ c:irua:150711 |
Serial |
4971 |
Permanent link to this record |
|
|
|
Author |
Sieger, M.; Pahlke, P.; Lao, M.; Meledin, A.; Eisterer, M.; Van Tendeloo, G.; Schultz, L.; Nielsch, K.; Huehne, R. |
Title |
Thick secondary phase pinning-enhanced YBCO films on technical templates |
Type |
A1 Journal article |
Year |
2018 |
Publication |
IEEE transactions on applied superconductivity |
Abbreviated Journal |
|
Volume |
28 |
Issue |
4 |
Pages |
8000505 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
The critical current I-c(B) of YBa2Cu3O7-delta (YBCO) coated conductors can be increased by growing thicker superconductor layers as well as improving the critical current density J(c)(B) by the incorporation of artificial pinning centers. We studied the properties of pulsed laser deposited BaHfO3 (BHO)-doped YBCO films with thicknesses of up to 5 mu m on buffered rolling-assisted biaxially textured Ni-5 at % W tape and alternating beam assisted deposition textured Yttrium-stabilized ZrO2 layers on stainless steel. X-Ray diffraction confirms the epitaxial growth of the superconductor on the buffered metallic template. BHO additions reduce the film porosity and lower the probability to grow misoriented grains, hence preventing the J(c) decrease observed in undoped YBCO films with thicknesses > 2 mu m. Thereby, a continuous increase in I-c at 77 K is achieved. A mixed structure of secondary phase nanorods and platelets with different orientations increases J(c)(B) in the full angular range and simultaneously lowers the J(c) anisotropy compared to pristine YBCO. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
New York, N.Y. |
Editor |
|
Language |
|
Wos |
000427623700001 |
Publication Date |
2018-01-30 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1051-8223 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
1.288 |
Times cited |
1 |
Open Access |
Not_Open_Access |
Notes |
; This work was supported by EUROTAPES, a collaborative project funded by the European Commission's Seventh Framework Program (FP7 / 2007 – 2013) under Grant Agreement no. 280432. Max Sieger acknowledges funding by the Graduate Academy of the Technical University Dresden, funded by means of the Excellence Initiative by the German Federal and State Governments. ; |
Approved |
Most recent IF: NA |
Call Number |
UA @ lucian @ c:irua:150712 |
Serial |
4986 |
Permanent link to this record |
|
|
|
Author |
Van den Broek, W.; Reed, B.W.; Béché, A.; Velazco, A.; Verbeeck, J.; Koch, C.T. |
Title |
Various compressed sensing setups evaluated against Shannon sampling under constraint of constant illumination |
Type |
A1 Journal article |
Year |
2019 |
Publication |
IEEE transactions on computational imaging |
Abbreviated Journal |
|
Volume |
5 |
Issue |
3 |
Pages |
502-514 |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
Abstract |
Under the constraint of constant illumination, an information criterion is formulated for the Fisher information that compressed sensing measurements in optical and transmission electron microscopy contain about the underlying parameters. Since this approach requires prior knowledge of the signal's support in the sparse basis, we develop a heuristic quantity, the detective quantum efficiency (DQE), that tracks this information criterion well without this knowledge. In this paper, it is shown that for the investigated choice of sensing matrices, and in the absence of read-out noise, i.e., with only Poisson noise present, compressed sensing does not raise the amount of Fisher information in the recordings above that of Shannon sampling. Furthermore, enabled by the DQE's analytical tractability, the experimental designs are optimized by finding out the optimal fraction of on pixels as a function of dose and read-out noise. Finally, we introduce a regularization and demonstrate, through simulations and experiment, that it yields reconstructions attaining minimum mean squared error at experimental settings predicted by the DQE as optimal. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
000480352600013 |
Publication Date |
2019-01-24 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
2333-9403 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
4.546 |
Times cited |
7 |
Open Access |
|
Notes |
; This work was supported by the Hercules fund from the Flemish Government (Qu-Ant-EM microscope used for the experimental data). The work of W. Van den Broek was supported by the DFG under Grant BR 5095/2-1 (Compressed sensing in ptychography and transmission electron microscopy). The work of A. Beche, A. Velazco, and J. Verbeeck was supported by the FWO under Grant G093417N (Compressed sensing enabling low dose imaging in transmission electron microscopy). The work of Christoph T. Koch was supported by the DFG under Grant CRC 951. The associate editor coordinating the review of this manuscript and approving it for publication was Dr. Chrysanthe Preza. ; |
Approved |
Most recent IF: NA |
Call Number |
UA @ admin @ c:irua:161792 |
Serial |
5368 |
Permanent link to this record |
|
|
|
Author |
Van Aert, S.; den Dekker, A.J.; van den Bos, A.; van Dyck, D. |
Title |
High-resolution electron microscopy : from imaging toward measuring |
Type |
A1 Journal article |
Year |
2002 |
Publication |
IEEE transactions on instrumentation and measurement |
Abbreviated Journal |
Ieee T Instrum Meas |
Volume |
51 |
Issue |
4 |
Pages |
611-615 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT); Vision lab |
Abstract |
|
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
New York, N.Y. |
Editor |
|
Language |
|
Wos |
000178992000010 |
Publication Date |
2003-01-03 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0018-9456; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
2.456 |
Times cited |
13 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 2.456; 2002 IF: 0.592 |
Call Number |
UA @ lucian @ c:irua:47521 |
Serial |
1450 |
Permanent link to this record |
|
|
|
Author |
Dharanipragada, N.V.R.A.; Meledina, M.; Galvita, V.V.; Poelman, H.; Turner, S.; Van Tendeloo, G.; Detavernier, C.; Marin, G.B. |
Title |
Deactivation study of Fe2O3-CeO2 during redox cycles for CO production from CO2 |
Type |
A1 Journal article |
Year |
2016 |
Publication |
Industrial and engineering chemistry research |
Abbreviated Journal |
Ind Eng Chem Res |
Volume |
55 |
Issue |
55 |
Pages |
5911-5922 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
Deactivation was investigated in Fe2O3-CeO2 oxygen storage materials during repeated H-2-reduction and CO2-reoxidation. In situ XRD, XAS, and TEM were used to identify phases, crystallite sizes, and morphological changes upon cycling operation. The effect of redox cycling was investigated both in Fe-rich (80 wt % Fe2O3-CeO2) and Ce-rich (10 wt %Fe2O3-CeO2) materials. The former consisted of 100 nm Fe2O3 particles decorated with 5-10 nm Ce1-xFexO2-x. The latter presented CeO2 with incorporated Fe, i.e. a solid solution of Ce1-xFexO2-x, as the main oxygen carrier. By modeling the EXAFS Ce-K signal for as-prepared 10 wt %Fe2O3-CeO2, the amount of Fe in CeO2 was determined as 21 mol %, corresponding to 86% of the total iron content. Sintering and solid solid transformations, the latter including both new phase formation and element segregation, were identified as deactivation pathways upon redox cycling. In Ce-rich material, perovskite (CeFeO3) was identified by XRD. This phase remained inert during reduction and reoxidation, resulting in an overall lower oxygen storage capacity. Further, Fe segregated from the solid solution, thereby decreasing its reducibility. In addition, an increase in crystallite size occurred for all phases. In Fe-rich material, sintering is the main deactivation pathway, although Fe segregation from the solid solution and perovskite formation cannot be excluded. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Washington, D.C. |
Editor |
|
Language |
|
Wos |
000376825300013 |
Publication Date |
2016-04-22 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0888-5885; 1520-5045 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
2.843 |
Times cited |
26 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 2.843 |
Call Number |
UA @ lucian @ c:irua:134214 |
Serial |
4158 |
Permanent link to this record |
|
|
|
Author |
Tobías, G.; Beltrán-Porter, D.; Lebedev, O.I.; Van Tendeloo, G.; Rodríguez-Carvajal, J.; Fuertes, A. |
Title |
Anion ordering and defect structure in Ruddlesden-Popper strontium niobium oxynitrides |
Type |
A1 Journal article |
Year |
2004 |
Publication |
Inorganic chemistry |
Abbreviated Journal |
Inorg Chem |
Volume |
43 |
Issue |
25 |
Pages |
8010-8017 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
|
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Easton, Pa |
Editor |
|
Language |
|
Wos |
000225717700020 |
Publication Date |
2004-12-06 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0020-1669;1520-510X; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
4.857 |
Times cited |
31 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 4.857; 2004 IF: 3.454 |
Call Number |
UA @ lucian @ c:irua:54873 |
Serial |
120 |
Permanent link to this record |