Home [101–200] << 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 >>
List View
 | 
Citations
 | 
Details
   web
Records
Author Batuk, D.; Batuk, M.; Abakumov, A.M.; Hadermann, J.
Title Synergy between transmission electron microscopy and powder diffraction : application to modulated structures Type A1 Journal article
Year 2015 Publication Acta crystallographica: section B: structural science Abbreviated Journal Acta Crystallogr B
Volume 71 Issue 71 Pages 127-143
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract The crystal structure solution of modulated compounds is often very challenging, even using the well established methodology of single-crystal X-ray crystallography. This task becomes even more difficult for materials that cannot be prepared in a single-crystal form, so that only polycrystalline powders are available. This paper illustrates that the combined application of transmission electron microscopy (TEM) and powder diffraction is a possible solution to the problem. Using examples of anion-deficient perovskites modulated by periodic crystallographic shear planes, it is demonstrated what kind of local structural information can be obtained using various TEM techniques and how this information can be implemented in the crystal structure refinement against the powder diffraction data. The following TEM methods are discussed: electron diffraction (selected area electron diffraction, precession electron diffraction), imaging (conventional high-resolution TEM imaging, high-angle annular dark-field and annular bright-field scanning transmission electron microscopy) and state-of-the-art spectroscopic techniques (atomic resolution mapping using energy-dispersive X-ray analysis and electron energy loss spectroscopy).
Address
Corporate Author Thesis
Publisher Place of Publication (up) Copenhagen Editor
Language Wos 000352166500002 Publication Date 2015-04-01
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 2052-5206; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 2.032 Times cited 11 Open Access
Notes Fwo G039211n Approved Most recent IF: 2.032; 2015 IF: NA
Call Number c:irua:124411 Serial 3408
Permanent link to this record
 
 
Author Schowalter, M.; Rosenauer, A.; Titantah, J.T.; Lamoen, D.
Title Temperature-dependent Debye-Waller factors for semiconductors with the wurtzite-type structure Type A1 Journal article
Year 2009 Publication Acta crystallographica: section A: foundations of crystallography Abbreviated Journal Acta Crystallogr A
Volume 65 Issue Pages 227-231
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract We computed Debye-Waller factors in the temperature range from 0.1 to 1000 K for AlN, GaN, InN, ZnO and CdO with the wurtzite-type structure. The Debye-Waller factors were derived from phonon densities of states obtained from Hellmann-Feynman forces computed within the density-functional-theory formalism. The temperature dependences of the Debye-Waller factors were fitted and fit parameters are given.
Address
Corporate Author Thesis
Publisher Place of Publication (up) Copenhagen Editor
Language Wos 000264927100006 Publication Date 2009-03-12
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 0108-7673; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 5.725 Times cited 23 Open Access
Notes Fwo G.0425.05; Esteem 026019 Approved Most recent IF: 5.725; 2009 IF: 49.926
Call Number UA @ lucian @ c:irua:74565 Serial 3497
Permanent link to this record
 
 
Author Arakcheeva, A.; Pattison, P.; Chapuis, G.; Rossell, M.; Filaretov, A.; Morozov, V.; Van Tendeloo, G.
Title KSm(MoO4)2, an incommensurately modulated and partially disordered scheelite-like structure Type A1 Journal article
Year 2008 Publication Acta crystallographica: section B: structural science Abbreviated Journal Acta Crystallogr B
Volume 64 Issue Part 2 Pages 160-171
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract The incommensurately modulated scheelite-like KSm( MoO4)(2) structure has been refined in the monoclinic superspace group I2/b(alpha beta 0)00 by the Rietveld method on the basis of synchrotron radiation powder diffraction data. The systematic broadening of satellite reflections has been accounted for by applying anisotropic microstrain line-broadening. The microstructure has been studied by transmission electron microscopy (TEM). The partial disorder of the K and Sm cations in the A position is best approximated by a combination of harmonic and complex crenel functions with (0.952Sm + 0.048K) and (0.952K + 0.048Sm) atomic domains. This combination yields a compositional wave distribution from {KMoO4} to {SmMoO4} observed in the ab structure projection along q. The specific features of KSm(MoO4)(2) and degree of the A-cation ordering are discussed in comparison with the previously reported structure of KNd(MoO4)(2).
Address
Corporate Author Thesis
Publisher Place of Publication (up) Copenhagen Editor
Language Wos 000253992600004 Publication Date 2008-03-28
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 0108-7681; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor Times cited 23 Open Access
Notes Approved Most recent IF: NA
Call Number UA @ lucian @ c:irua:102618 Serial 3539
Permanent link to this record
 
 
Author De Backer, L.A.; Vos, W.; de Backer, J.; Van Holsbeke, C.; Vinchurkar, S.; de Backer, W.
Title The acute effect of budesonide/formoterol in COPD : a multi-slice computed tomography and lung function study Type A1 Journal article
Year 2012 Publication European Respiratory Journal Abbreviated Journal Eur Respir J
Volume 40 Issue 2 Pages 298-305
Keywords A1 Journal article; Biophysics and Biomedical Physics; Condensed Matter Theory (CMT); Laboratory Experimental Medicine and Pediatrics (LEMP)
Abstract The Global Initiative for Chronic Obstructive Lung Disease (GOLD) classification of chronic obstructive pulmonary disease (COPD) does not always match with other clinical disease descriptors such as exacerbation frequency and quality of life, indicating that forced expiratory volume in 1 s (FEV1) is not a perfect descriptor of the disease. The aim of this study was to find out whether changes in airway geometry after inhalation of the most commonly used inhalation therapy in severe COPD can more adequately be described with an image-based approach than with spirometry. 10 COPD GOLD stage III patients were assessed in a double-blind crossover study. Airway volumes were analysed using segmentation of multi-slice computed tomography (MSCT) images; airway resistance was determined using computational fluid dynamics (CFD). Distal airway volume significantly increased (p=0.011) in patients 4 h after receiving a budesonide/formoterol combination from 9.6+/-4.67 cm(3) to 10.14+/-4.81 cm(3). Also CFD-determined airway resistance significantly decreased (p=0.047) from 0.051+/-0.021 kPa.s.L-1 to 0.043+/- 0.019 kPa.s.L-1. None of the lung function parameters showed a significant change. Only functional residual capacity (FRC) showed a trend to decline (p=0.056). Only the image-based parameters were able to predict the visit at which the combination product was administered. This study showed that imaging is a sensitive, complementary tool to describe changes in airway structure.
Address
Corporate Author Thesis
Publisher Place of Publication (up) Copenhagen Editor
Language Wos 000307291700006 Publication Date 2011-12-20
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 0903-1936;1399-3003; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 10.569 Times cited 37 Open Access
Notes ; ; Approved Most recent IF: 10.569; 2012 IF: 6.355
Call Number UA @ lucian @ c:irua:101113 Serial 3568
Permanent link to this record
 
 
Author Hadermann, J.; Van Tendeloo, G.; Abakumov, A.M.
Title Transmission electron microscopy and structural phase transitions in anion-deficient perovskite-based oxides Type A1 Journal article
Year 2005 Publication Acta crystallographica: section A: foundations of crystallography Abbreviated Journal Acta Crystallogr A
Volume 61 Issue 1 Pages 77-92
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract
Address
Corporate Author Thesis
Publisher Place of Publication (up) Copenhagen Editor
Language Wos 000225865500008 Publication Date 2004-12-22
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 0108-7673; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 5.725 Times cited 18 Open Access
Notes Approved Most recent IF: 5.725; 2005 IF: 1.791
Call Number UA @ lucian @ c:irua:51442 Serial 3706
Permanent link to this record
 
 
Author Zhang, F.; Inokoshi, M.; Batuk, M.; Hadermann, J.; Naert, I.; Van Meerbeek, B.; Vleugels, J.
Title Strength, toughness and aging stability of highly-translucent Y-TZP ceramics for dental restorations Type A1 Journal article
Year 2016 Publication Dental materials Abbreviated Journal Dent Mater
Volume 32 Issue 12 Pages E327-E337
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract Objective. The aim was to evaluate the optical properties, mechanical properties and aging stability of yttria-stabilized zirconia with different compositions, highlighting the influence of the alumina addition, Y2O3 content and La2O3 doping on the translucency. Methods. Five different Y-TZP zirconia powders (3 commercially available and 2 experimentally modified) were sintered under the same conditions and characterized by X-ray diffraction with Rietveld analysis and scanning electron microscopy (SEM). Translucency (n = 6/group) was measured with a color meter, allowing to calculate the translucency parameter (TP) and the contrast ratio (CR). Mechanical properties were appraised with four-point bending strength (n = 10), single edge V-notched beam (SEVNB) fracture toughness (n = 8) and Vickers hardness (n = 10). The aging stability was evaluated by measuring the tetragonal to monoclinic transformation (n = 3) after accelerated hydrothermal aging in steam at 134 degrees C, and the transformation curves were fitted by the Mehl-Avrami-Johnson (MAJ) equation. Data were analyzed by one-way ANOVA, followed by Tukey's HSD test (alpha = 0.05). Results. Lowering the alumina content below 0.25 wt.% avoided the formation of alumina particles and therefore increased the translucency of 3Y-TZP ceramics, but the hydrothermal aging stability was reduced. A higher yttria content (5 mol%) introduced about 50% cubic zirconia phase and gave rise to the most translucent and aging-resistant Y-TZP ceramics, but the fracture toughness and strength were considerably sacrificed. 0.2 mol% La2O3 doping of 3Y-TZP tailored the grain boundary chemistry and significantly improved the aging resistance and translucency. Although the translucency improvement by La2O3 doping was less effective than for introducing a substantial amount of cubic zirconia, this strategy was able to maintain the mechanical properties of typical 3Y-TZP ceramics. Significance. Three different approaches were compared to improve the translucency of 3YTZP ceramics. (C) 2016 The Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.
Address
Corporate Author Thesis
Publisher Place of Publication (up) Copenhagen Editor
Language Wos 000389516400003 Publication Date
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 0109-5641 ISBN Additional Links UA library record; WoS full record
Impact Factor 4.07 Times cited 47 Open Access
Notes Approved Most recent IF: 4.07
Call Number UA @ lucian @ c:irua:140246 Serial 4447
Permanent link to this record
 
 
Author Torfs, E.; Vajs, J.; Bidart de Macedo, M.; Cools, F.; Vanhoutte, B.; Gorbanev, Y.; Bogaerts, A.; Verschaeve, L.; Caljon, G.; Maes, L.; Delputte, P.; Cos, P.; Komrlj, J.; Cappoen, D.
Title Synthesis and in vitro investigation of halogenated 1,3-bis(4-nitrophenyl)triazenide salts as antitubercular compounds Type A1 Journal article
Year 2017 Publication Chemical biology and drug design Abbreviated Journal Chem Biol Drug Des
Volume Issue Pages 1-10
Keywords A1 Journal article; Pharmacology. Therapy; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
Abstract The diverse pharmacological properties of the diaryltriazenes have sparked the interest to investigate their potential to be repurposed as antitubercular drug candidates. In an attempt to improve the antitubercular activity of a previously constructed diaryltriazene library, eight new halogenated nitroaromatic triazenides were synthesized and underwent biological evaluation. The potency of the series was confirmed against the Mycobacterium tuberculosis lab strain H37Ra, and for the most potent derivative, we observed a minimal inhibitory concentration of 0.85 μm. The potency of the triazenide derivatives against M. tuberculosis H37Ra was found to be highly dependent on the nature of the halogenated phenyl substituent and less dependent on cationic species used for the preparation of the salts. Although the inhibitory concentration against J774A.1 macrophages was observed at 3.08 μm, the cellular toxicity was not mediated by the generation of nitroxide intermediate as confirmed by electron paramagnetic resonance spectroscopy, whereas no in vitro mutagenicity could be observed for the new halogenated nitroaromatic triazenides when a trifluoromethyl substituent was present on both the aryl moieties.
Address
Corporate Author Thesis
Publisher Place of Publication (up) Copenhagen Editor
Language Wos 000422952300027 Publication Date 2017-08-28
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1747-0277; 1747-0285; 1397-002x ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 2.396 Times cited 5 Open Access OpenAccess
Notes Approved Most recent IF: 2.396
Call Number UA @ lucian @ c:irua:147182 Serial 4794
Permanent link to this record
 
 
Author Bogaerts, A.; Berthelot, A.; Heijkers, S.; Kozák, T.
Title Computer modeling of a microwave discharge used for CO2 splitting Type P2 Proceeding
Year 2015 Publication Abbreviated Journal
Volume Issue Pages 41-50
Keywords P2 Proceeding; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
Abstract
Address
Corporate Author Thesis
Publisher UCO Press Place of Publication (up) Cordoba Editor
Language Wos Publication Date
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN ISBN 978-84-9927-187-3 Additional Links UA library record
Impact Factor Times cited Open Access
Notes Approved Most recent IF: NA
Call Number UA @ lucian @ c:irua:135096 Serial 4154
Permanent link to this record
 
 
Author Berthelot, A.; Kolev, S.; Bogaerts, A.
Title Different pressure regimes of a surface-wave discharge in argon : a modelling investigation Type P2 Proceeding
Year 2015 Publication Abbreviated Journal
Volume Issue Pages 57-62
Keywords P2 Proceeding; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
Abstract
Address
Corporate Author Thesis
Publisher UCO Press Place of Publication (up) Cordoba Editor
Language Wos Publication Date
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN ISBN 978-84-9927-187-3 Additional Links UA library record
Impact Factor Times cited Open Access
Notes Approved Most recent IF: NA
Call Number UA @ lucian @ c:irua:135094 Serial 4160
Permanent link to this record
 
 
Author Cao, S.; Nishida, M.; Somsen, C.; Eggeler, G.; Schryvers, D.
Title 3D FIB/SEM study of Ni4Ti3 precipitates in Ni-Ti alloys with different thermal-mechanical histories Type P1 Proceeding
Year 2009 Publication Abbreviated Journal
Volume Issue Pages 02004,1-02004,6
Keywords P1 Proceeding; Electron microscopy for materials research (EMAT)
Abstract The three-dimensional size, morphology and distribution of Ni4Ti3 precipitates growing in binary Ni-rich Ni-Ti alloys have been investigated via a slice view procedure in a Dual-Beam FIB/SEM system, in order to better stress-free Ni50.8Ti49.2 alloy with all four variants of precipitates and a compressed Ni51Ti49 alloy with aligned precipitates in one family were studied. The Ni4Ti3 precipitates reach a volume fraction of 9.6% in the reconstructed region of the stress-free alloy and 4.3% in the compressed one. In both cases, the mean volume, specific surface area, sphericity and aspect ratio of the precipitates are calculated and the Pair Distribution Functions of the precipitates are obtained. It is shown that most precipitates in the stress-free sample grow larger and have a more lenticular shape, while those in the compressed sample are more cylindrical. Deviations from these ideal shapes reveal internal steps in the stress-free sample and lamellae formation in the compressed one.
Address
Corporate Author Thesis
Publisher Edp Place of Publication (up) Coutaboeuf Editor
Language Wos 000274582300008 Publication Date 2009-08-31
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor Times cited 1 Open Access
Notes Approved Most recent IF: NA
Call Number UA @ lucian @ c:irua:81950 c:irua:81950 Serial 14
Permanent link to this record
 
 
Author Tirry, W.; Schryvers, D.
Title 3D strain fields surrounding Ni4Ti3: direct measurement and correlation with the R-phase Type P1 Proceeding
Year 2009 Publication Abbreviated Journal
Volume Issue Pages 02032,1-02032,6
Keywords P1 Proceeding; Electron microscopy for materials research (EMAT)
Abstract Strain fields introduced by coherent Ni4Ti3 precipitates in austenitic Ni-Ti are believed to be a possible origin of why the R-phase transformation is introduced as an extra step before transforming to the B19'. The presence of this strain field was already confirmed in the past by conventional transmission electron microscopy (TEM) techniques and measured quantitatively by high resolution TEM (HRTEM). This time the geometrical phase method is applied on HRTEM micrographs to measure the full 3D strain tensor of the strain fields. Since each atomic resolution micrograph only results in a 2D measurement of the strain, observations in two different zone orientations are combined to retrieve the 3 x 3 strain tensor. In this work observations in a [1-1 1](B2) and [1 0-1](B2) zone orientation are used and this in case of precipitates with a diameter of around 50nm. In a next step the measured strain tensor is compared to the calculated eigenstrain of the R-phase in reference to the B2 matrix. This comparison shows that the introduced strain is very similar to the eigenstrain of one R-phase variant. Since for both structures, Ni4Ti3 and R-phase, four orientation variants are possible, each variant of the R-phase is thus able to accommodate the strain field of one of the Ni4Ti3 variants.
Address
Corporate Author Thesis
Publisher Edp Place of Publication (up) Coutaboeuf Editor
Language Wos 000274582300036 Publication Date 2009-08-31
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN ISBN Additional Links UA library record; WoS full record
Impact Factor Times cited Open Access
Notes Approved Most recent IF: NA
Call Number UA @ lucian @ c:irua:81953 Serial 17
Permanent link to this record
 
 
Author Idrissi, H.; Schryvers, D.; Salje, E.K.H.; Zhang, H.; Carpenter, M.A.; Moya, X.
Title Pinning of the martensitic microstructures by dislocations in Cu74.08Al23.13Be2.79 Type P1 Proceeding
Year 2009 Publication Abbreviated Journal
Volume Issue Pages 02029,1-02029,5
Keywords P1 Proceeding; Electron microscopy for materials research (EMAT)
Abstract A single crystal of Cu74.08Al23.13Be2.79 undergoes a martensitic phase transition at 246K and 232K under heating and cooling, respectively. Surprisingly, the martensite phase is elastically much harder than the austenite phase showing that interfaces between various crystallographic variants are strongly pinned and can not be moved by external stress while the phase boundary between the austenite and martensite regions in the sample remains mobile. This unusual behavior was revealed by Dynamical Mechanical Analysis and Resonant Ultrasound Spectroscopy. Transmission Electron Microscopy shows that the pinning is generated by dislocations, which are inherited from the austenite phase. Such dislocations can hinder the movement of stacking faults in the 18R martensite structure or twin boundaries between martensite variants.
Address
Corporate Author Thesis
Publisher Edp Place of Publication (up) Coutaboeuf Editor
Language Wos 000274582300033 Publication Date 2009-08-31
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor Times cited 2 Open Access
Notes Approved Most recent IF: NA
Call Number UA @ lucian @ c:irua:81952 Serial 2626
Permanent link to this record
 
 
Author Tian, H.; Schryvers, D.; Shabalovskaya, S.; van Humbeeck, J.
Title TEM study of the mechanism of Ni ion release from Nitinol wires with original oxides Type P1 Proceeding
Year 2009 Publication Abbreviated Journal
Volume Issue Pages 05027,1-05027,6
Keywords P1 Proceeding; Electron microscopy for materials research (EMAT)
Abstract The surface of commercial Nitinol wires with original oxides and a thickness in the 30-190 nm range was investigated by different state of art TEM techniques. The oxide surface layer was identified as a combination of TiO and TiO2 depending on the processing of the wire. Between the core of the wires and the oxidized surface, an interfacial Ni3Ti nanolayer was observed while Ni nanoparticles are found inside the original oxide. The particle sizes, their distribution in the surface and the Ti-O stoichiometry were deduced from the analysis of the obtained data. Molecular dynamics calculations performed for evaluation of the stability of Ni particles relative to the atomic state revealed that a pure Ni particle has a lower energy than free Ni atoms inside the TiO2 lattice. The obtained results are discussed with respect to surface stability and Ni release in the human body.
Address
Corporate Author Thesis
Publisher Edp Place of Publication (up) Coutaboeuf Editor
Language Wos 000274582300092 Publication Date 2009-08-31
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor Times cited 1 Open Access
Notes Approved Most recent IF: NA
Call Number UA @ lucian @ c:irua:81954 Serial 3493
Permanent link to this record
 
 
Author Delville, R.; James, R.D.; Salman, U.; Finel, A.; Schryvers, D.
Title Transmission electron microscopy study of low-hysteresis shape memory alloys Type P1 Proceeding
Year 2009 Publication Abbreviated Journal
Volume Issue Pages 02005,1-02005,7
Keywords P1 Proceeding; Electron microscopy for materials research (EMAT)
Abstract Recent findings have linked low hysteresis in shape memory alloys with phase compatibility between austenite and martensite. In order to investigate the evolution of microstructure as the phase compatibility increases and the hysteresis is reduced, transmission electron microscopy was used to study the alloy system Ti50Ni50-xPdx where the composition is systemically tuned to approach perfect compatibility. Changes in morphology, twinning density and twinning modes are reported along with special microstructures occurring when the compatibility is achieved. In addition, the interface between austenite and a single variant of martensite was studied by high-resolution and conventional electron microscopy. The atomically sharp, defect free, low energy configuration of the interface suggests that it plays an important role in the lowering of hysteresis. Finally, dynamical modeling of the martensitic transformation using the phase-field micro-elasticity model within the geometrically linear theory succeeded in reproducing the change in microstructure as the compatibility condition is satisfied. Latest results on the extension of these findings in other Ni-Ti based ternary/quaternary systems are also reported.
Address
Corporate Author Thesis
Publisher Edp Place of Publication (up) Coutaboeuf Editor
Language Wos 000274582300009 Publication Date 2009-08-31
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor Times cited 3 Open Access
Notes Approved Most recent IF: NA
Call Number UA @ lucian @ c:irua:81951 Serial 3716
Permanent link to this record
 
 
Author Van Holsbeke, C.S.; Leemans, G.; Vos, W.G.; de Backer, J.W.; Vinchurkar, S.C.; Geldof, M.; Verdonck, P.R.; Parizel, P.M.; van Schil, P.E.; de Backer, W.A.
Title Functional Respiratory Imaging as a tool to personalize respiratory treatment in subjects with unilateral diaphragmatic paralysis Type A1 Journal article
Year 2013 Publication Respiratory care Abbreviated Journal Resp Care
Volume Issue Pages 1-20
Keywords A1 Journal article; Condensed Matter Theory (CMT); Antwerp Surgical Training, Anatomy and Research Centre (ASTARC); Laboratory Experimental Medicine and Pediatrics (LEMP)
Abstract In two subjects with a unilateral diaphragmatic paralysis and complaints of dyspnea, a completely different treatment approach was chosen despite similar anatomical and physiological abnormalities. These decisions were supported by the results generated by Functional Respiratory Imaging (FRI). FRI was able to generate functional information with respect to lobar ventilation and local drug deposition. In one subject, it was found that some lobes were poorly ventilated and drug deposition simulation showed that some regions were undertreated. This subject underwent a diaphragm plication to restore the ventilation. In the other subject, it was found that all lobes were still ventilated. A conservative approach with regular follow-up was chosen to wait for spontaneous recovery of the diaphragmatic function. Both subjects improved subjectively and objectively. These cases demonstrate how novel medical imaging techniques such as FRI can be used to personalize respiratory treatment in subjects with unilateral diaphragmatic paralysis.
Address
Corporate Author Thesis
Publisher Place of Publication (up) Dallas, Tex. Editor
Language Wos 000349200100024 Publication Date 2013-12-11
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 0020-1324;1943-3654; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 1.733 Times cited 5 Open Access
Notes ; ; Approved Most recent IF: 1.733; 2013 IF: 1.840
Call Number UA @ lucian @ c:irua:112982 Serial 1303
Permanent link to this record
 
 
Author Oleshko, V.; Gijbels, R.; Jacob, W.; Alfimov, M.
Title Characterization of complex silver halide photographic systems by means of analytical electron microscopy Type A1 Journal article
Year 1995 Publication Microbeam analysis Abbreviated Journal
Volume 4 Issue 1 Pages 1-29
Keywords A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
Abstract
Address
Corporate Author Thesis
Publisher Place of Publication (up) Deerfield Beach, Fla Editor
Language Wos A1995RR65700001 Publication Date 0000-00-00
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1061-3420 ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor Times cited 9 Open Access
Notes Approved PHYSICS, APPLIED 28/145 Q1 #
Call Number UA @ lucian @ c:irua:12275 Serial 318
Permanent link to this record
 
 
Author Oleshko, V.; Gijbels, R.; Jacob, W.; Alfimov, M.
Title Characterization of complex silver halide photographic systems by means of analytical electron microscopy Type A1 Journal article
Year 1994 Publication Microbeam analysis Abbreviated Journal
Volume 3 Issue Pages 1-29
Keywords A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
Abstract
Address
Corporate Author Thesis
Publisher Place of Publication (up) Deerfield Beach, Fla Editor
Language Wos Publication Date 0000-00-00
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 1061-3420 ISBN Additional Links UA library record
Impact Factor Times cited Open Access
Notes Approved PHYSICS, APPLIED 28/145 Q1 #
Call Number UA @ lucian @ c:irua:10314 Serial 319
Permanent link to this record
 
 
Author van Landuyt, J.; Van Tendeloo, G.
Title Charcaterization by high-resolution transmission electron microscopy Type H3 Book chapter
Year 1998 Publication Abbreviated Journal
Volume Issue Pages 187-190
Keywords H3 Book chapter; Electron microscopy for materials research (EMAT)
Abstract
Address
Corporate Author Thesis
Publisher Stt Place of Publication (up) Den Haag Editor
Language Wos A1990DC39700012 Publication Date 0000-00-00
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN ISBN Additional Links UA library record; WoS full record;
Impact Factor Times cited Open Access
Notes Approved Most recent IF: NA
Call Number UA @ lucian @ c:irua:29685 Serial 335
Permanent link to this record
 
 
Author Parente, A.; Gorlé, C.; van Beeck, J.; Benocci, C.
Title A comprehensive modelling approach for the neutral atmospheric boundary layer : consistent inflow conditions, wall function and turbulence model Type A1 Journal article
Year 2011 Publication Boundary-layer meteorology Abbreviated Journal Bound-Lay Meteorol
Volume 140 Issue 3 Pages 411-428
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract We report on a novel approach for the Reynolds-averaged Navier-Stokes (RANS) modelling of the neutral atmospheric boundary layer (ABL), using the standard k− turbulence model. A new inlet condition for turbulent kinetic energy is analytically derived from the solution of the k− model transport equations, resulting in a consistent set of fully developed inlet conditions for the neutral ABL. A modification of the standard k− model is also employed to ensure consistency between the inlet conditions and the turbulence model. In particular, the turbulence model constant C μ is generalized as a location-dependent parameter, and a source term is introduced in the transport equation for the turbulent dissipation rate. The application of the proposed methodology to cases involving obstacles in the flow is made possible through the implementation of an algorithm, which automatically switches the turbulence model formulation when going from the region where the ABL is undisturbed to the region directly affected by the building. Finally, the model is completed with a slightly modified version of the Richards and Hoxey rough-wall boundary condition. The methodology is implemented and tested in the commercial code Ansys Fluent 12.1. Results are presented for a neutral boundary layer over flat terrain and for the flow around a single building immersed in an ABL.
Address
Corporate Author Thesis
Publisher Place of Publication (up) Dordrecht Editor
Language Wos 000293923800004 Publication Date 2011-05-25
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 0006-8314;1573-1472; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 2.573 Times cited 54 Open Access
Notes Approved Most recent IF: 2.573; 2011 IF: 1.737
Call Number UA @ lucian @ c:irua:92341 Serial 450
Permanent link to this record
 
 
Author Gorlé, C.; van Beeck, J.; Rambaud, P.
Title Dispersion in the wake of a rectangular building : validation of two Reynolds-averaged Navier-Stokes modelling approaches Type A1 Journal article
Year 2010 Publication Boundary-layer meteorology Abbreviated Journal Bound-Lay Meteorol
Volume 137 Issue 1 Pages 115-133
Keywords A1 Journal article; Electron microscopy for materials research (EMAT)
Abstract When modelling the turbulent dispersion of a passive tracer using Reynolds-averaged Navier-Stokes (RANS) simulations, two different approaches can be used. The first consists of solving a transport equation for a scalar, where the governing parameters are the mean velocity field and the turbulent diffusion coefficient, given by the ratio of the turbulent viscosity and the turbulent Schmidt number Sc (t) . The second approach uses a Lagrangian particle tracking algorithm, where the governing parameters are the mean velocity and the fluctuating velocity field, which is determined from the turbulence kinetic energy and the Lagrangian time T (L) . A comparison between the two approaches and wind-tunnel data for the dispersion in the wake of a rectangular building immersed in a neutral atmospheric boundary layer (ABL) is presented. Particular attention was paid to the influence of turbulence model parameters on the flow and concentration field. In addition, an approach to estimate Sc (t) and T (L) based on the calculated flow field is proposed. The results show that applying modified turbulence model constants to enable correct modelling of the ABL improves the prediction for the velocity and concentration fields when the modification is restricted to the region for which it was derived. The difference between simulated and measured concentrations is smaller than 25% or the uncertainty of the data on 76% of the points when solving the transport equation for a scalar with the proposed formulation for Sc (t) , and on 69% of the points when using the Lagrangian particle tracking with the proposed formulation for T (L) .
Address
Corporate Author Thesis
Publisher Place of Publication (up) Dordrecht Editor
Language Wos 000281712500006 Publication Date 2010-06-30
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN 0006-8314;1573-1472; ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor 2.573 Times cited 16 Open Access
Notes Approved Most recent IF: 2.573; 2010 IF: 1.879
Call Number UA @ lucian @ c:irua:95570 Serial 736
Permanent link to this record
 
 
Author Van Tendeloo, G.; Amelinckx, S.
Title Electron-microscopy and the structural studies of superconducting materials and fullerites Type P1 Proceeding
Year 1994 Publication NATO Advanced Study Institutes series: series E : applied sciences T2 – NATO Advanced Study Institute on Materials and crystallographic Aspects, of HT(c)-Superconductivity, May 17-30, 1993, Erice, Italy Abbreviated Journal
Volume Issue Pages 521-538
Keywords P1 Proceeding; Electron microscopy for materials research (EMAT)
Abstract
Address
Corporate Author Thesis
Publisher Kluwer Academic Place of Publication (up) Dordrecht Editor
Language Wos A1994BA54N00025 Publication Date 0000-00-00
Series Editor Series Title Abbreviated Series Title
Series Volume 263 Series Issue Edition
ISSN 0-7923-2773-X ISBN Additional Links UA library record; WoS full record;
Impact Factor Times cited Open Access
Notes Approved no
Call Number UA @ lucian @ c:irua:95934 Serial 949
Permanent link to this record
 
 
Author Beusen, J.-M.; Van 't dack, L.; Gijbels, R.
Title Interaction between rock-forming minerals and fluids under hydrothermal conditions : experiments with emphasis on the chemical composition of the minerals surface and on the trace element content of the aqueous phase Type P3 Proceeding
Year 1985 Publication Abbreviated Journal
Volume Issue Pages 310-317
Keywords P3 Proceeding; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
Abstract
Address
Corporate Author Thesis
Publisher Reidel Place of Publication (up) Dordrecht Editor
Language Wos Publication Date 0000-00-00
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN ISBN Additional Links UA library record
Impact Factor Times cited Open Access
Notes Approved no
Call Number UA @ lucian @ c:irua:111510 Serial 1682
Permanent link to this record
 
 
Author Kaganovich, I.; Misina, M.; Bogaerts, A.; Gijbels, R.
Title Investigation of the electron distribution functions in low pressure electron cyclotron resonance discharges Type H1 Book chapter
Year 1999 Publication Abbreviated Journal
Volume Issue Pages 543-544
Keywords H1 Book chapter; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
Abstract
Address
Corporate Author Thesis
Publisher Kluwer Academic Place of Publication (up) Dordrecht Editor
Language Wos 000081413700057 Publication Date 0000-00-00
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN ISBN Additional Links UA library record; WoS full record;
Impact Factor Times cited Open Access
Notes Approved Most recent IF: NA
Call Number UA @ lucian @ c:irua:24926 Serial 1736
Permanent link to this record
 
 
Author Van Tendeloo, G.; Lebedev, O.I.; Verbist, K.; Abakumov, A.M.; Shpanchenko, R.V.; Antipov, E.V.; Blank, D.H.A.
Title The local structure of YBCO based materials by TEM Type H1 Book chapter
Year 1999 Publication Abbreviated Journal
Volume Issue Pages 11-19
Keywords H1 Book chapter; Electron microscopy for materials research (EMAT)
Abstract
Address
Corporate Author Thesis
Publisher Kluwer Academic Place of Publication (up) Dordrecht Editor
Language Wos 000079308200002 Publication Date 0000-00-00
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN ISBN Additional Links UA library record; WoS full record;
Impact Factor Times cited Open Access
Notes Approved Most recent IF: NA
Call Number UA @ lucian @ c:irua:29709 Serial 1833
Permanent link to this record
 
 
Author Peeters, F.M.; Shi, J.M.; Devreese, J.T.
Title Magneto-optics of shallow impurities in superlattices Type H1 Book chapter
Year 1993 Publication Abbreviated Journal
Volume Issue Pages 221-237
Keywords H1 Book chapter; Condensed Matter Theory (CMT); Theory of quantum systems and complex systems
Abstract
Address
Corporate Author Thesis
Publisher Kluwer Place of Publication (up) Dordrecht Editor
Language Wos A1993BA34C00020 Publication Date 0000-00-00
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN ISBN Additional Links UA library record; WoS full record; WoS citing articles
Impact Factor Times cited 3 Open Access
Notes Approved no
Call Number UA @ lucian @ c:irua:5789 Serial 1904
Permanent link to this record
 
 
Author Devreese, J.T.; Shi, J.M.; Peeters, F.M.
Title Magneto-polaron effect on shallow donors in 3D en Q2S systems Type H3 Book chapter
Year 1993 Publication Abbreviated Journal
Volume Issue Pages 173-184
Keywords H3 Book chapter; Condensed Matter Theory (CMT); Theory of quantum systems and complex systems
Abstract
Address
Corporate Author Thesis
Publisher Kluwer Place of Publication (up) Dordrecht Editor
Language Wos Publication Date 0000-00-00
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN ISBN Additional Links UA library record
Impact Factor Times cited Open Access
Notes Approved no
Call Number UA @ lucian @ c:irua:20360 Serial 1908
Permanent link to this record
 
 
Author Ivanov, V.A.; Betouras, J.J.; Peeters, F.M.
Title MgB2 : superconductivity and pressure effects Type P1 Proceeding
Year 2003 Publication Abbreviated Journal
Volume Issue Pages 35-46
Keywords P1 Proceeding; Condensed Matter Theory (CMT)
Abstract We present a Ginzburg-Landau theory for a two-band superconductor with emphasis on MgB2. We propose experiments which lead to identification of the possible scenarios: whether both sigma- and pi-bands superconduct or sigma-alone. According to the second scenario a microscopic theory of superconducting MgB2 is proposed based on the strongly interacting or-electrons and non-correlated pi-electrons of boron ions. The kinematic and Coulomb interactions of sigma-electrons provide the superconducting state with an anisotropic gap of s(*)-wave symmetry. The critical temperature T-c has a non-monotonic dependence on the distance r between the centers of gravity of sigma- and pi-bands. The position of MgB2 on a bell-shaped curve T-c (r) is identified in the overdoped region. The derived superconducting density of electronic states is in agreement with available experimental and theoretical data. It is argued that the effects of pressure are crucial to identify the microscopic origin of superconductivity in MgB2. Possibilities for increase of T, are discussed.
Address
Corporate Author Thesis
Publisher Springer Place of Publication (up) Dordrecht Editor
Language Wos Publication Date 0000-00-00
Series Editor Series Title Abbreviated Series Title
Series Volume 106 Series Issue Edition
ISSN 1-4020-1372-8 ISBN Additional Links UA library record; WoS full record;
Impact Factor Times cited Open Access
Notes Approved Most recent IF: NA
Call Number UA @ lucian @ c:irua:94869 Serial 2020
Permanent link to this record
 
 
Author Berezhnoi, S.; Kaganovich, I.; Bogaerts, A.; Gijbels, R.
Title Modelling of radio frequency capacitively coupled plasma at intermediate pressures Type H3 Book chapter
Year 1999 Publication Abbreviated Journal
Volume Issue Pages 525-526
Keywords H3 Book chapter; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT)
Abstract
Address
Corporate Author Thesis
Publisher Kluwer Academic Place of Publication (up) Dordrecht Editor
Language Wos 000081413700048 Publication Date 0000-00-00
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN ISBN Additional Links UA library record; WoS full record;
Impact Factor Times cited Open Access
Notes Approved Most recent IF: NA
Call Number UA @ lucian @ c:irua:24925 Serial 2154
Permanent link to this record
 
 
Author Peeters, F.M.
Title The phase diagram Type H3 Book chapter
Year 1997 Publication Abbreviated Journal
Volume Issue Pages 17-32
Keywords H3 Book chapter; Condensed Matter Theory (CMT)
Abstract
Address
Corporate Author Thesis
Publisher Kluwer Academic Publishers Place of Publication (up) Dordrecht Editor
Language Wos Publication Date 0000-00-00
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN ISBN Additional Links UA library record
Impact Factor Times cited Open Access
Notes Approved Most recent IF: NA
Call Number UA @ lucian @ c:irua:19261 Serial 2580
Permanent link to this record
 
 
Author Hai, G.Q.; Peeters, F.M.; Devreese, J.T.
Title Polaron cyclotron resonance spectrum with interface optical phonon modes in GaAs/AlAs quantum wells Type H3 Book chapter
Year 1993 Publication Abbreviated Journal
Volume Issue Pages 243-252
Keywords H3 Book chapter; Condensed Matter Theory (CMT); Theory of quantum systems and complex systems
Abstract
Address
Corporate Author Thesis
Publisher Kluwer Place of Publication (up) Dordrecht Editor
Language Wos A1993BY55J00024 Publication Date 0000-00-00
Series Editor Series Title Abbreviated Series Title
Series Volume Series Issue Edition
ISSN ISBN Additional Links UA library record; WoS full record;
Impact Factor Times cited Open Access
Notes Approved
Call Number UA @ lucian @ c:irua:5743 Serial 2664
Permanent link to this record