Records |
Author |
Zhao, S.-X.; Gao, F.; Wang, Y.-N.; Bogaerts, A. |
Title |
Gas ratio effects on the Si etch rate and profile uniformity in an inductively coupled Ar/CF4 plasma |
Type |
A1 Journal article |
Year |
2013 |
Publication |
Plasma sources science and technology |
Abbreviated Journal |
Plasma Sources Sci T |
Volume |
22 |
Issue |
1 |
Pages |
015017-15018 |
Keywords ![sorted by Keywords field, descending order (down)](img/sort_desc.gif) |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
In this work, a hybrid model is used to investigate the effect of different gas ratios on the Si etching and polymer film deposition characteristics in an Ar/CF4 inductively coupled plasma. The influence of the surface processes on the bulk plasma properties is studied, and also the spatial characteristics of important gas phase and etched species. The densities of F and CF2 decrease when the surface module is included in the simulations, due to the species consumption caused by etching and polymer deposition. The influence of the surface processes on the bulk plasma depends on the Ar/CF4 gas ratio. The deposited polymer becomes thicker at high CF4 content because of more abundant CFx radicals. As a result of the competition between the polymer thickness and the F flux, the etch rate first increases and then decreases upon increasing the CF4 content. The electron properties, more specifically the electron density profile, affect the Si etch characteristics substantially by determining the radical density and flux profiles. In fact, the radial profile of the etch rate is more uniform at low CF4 content since the electron density has a smooth distribution. At high CF4 content, the etch rate is less uniform with a minimum halfway along the wafer radius, because the electron density distribution is more localized. Therefore, our calculations predict that it is better to work at relatively high Ar/CF4 gas ratios, in order to obtain high etch rate and good profile uniformity for etch applications. This, in fact, corresponds to the typical experimental etch conditions in Ar/CF4 gas mixtures as found in the literature, where Ar is typically present at a much higher concentration than CF4. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
Institute of Physics |
Place of Publication |
Bristol |
Editor |
|
Language |
|
Wos |
000314966300022 |
Publication Date |
2012-12-20 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0963-0252;1361-6595; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
3.302 |
Times cited |
11 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 3.302; 2013 IF: 3.056 |
Call Number |
UA @ lucian @ c:irua:102583 |
Serial |
1320 |
Permanent link to this record |
|
|
|
Author |
Zhang, Q.-Z.; Liu, Y.-X.; Jiang, W.; Bogaerts, A.; Wang, Y.-N. |
Title |
Heating mechanism in direct current superposed single-frequency and dual-frequency capacitively coupled plasmas |
Type |
A1 Journal article |
Year |
2013 |
Publication |
Plasma sources science and technology |
Abbreviated Journal |
Plasma Sources Sci T |
Volume |
22 |
Issue |
2 |
Pages |
025014-25018 |
Keywords ![sorted by Keywords field, descending order (down)](img/sort_desc.gif) |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
In this work particle-in-cell/Monte Carlo collision simulations are performed to study the heating mechanism and plasma characteristics in direct current (dc) superposed radio-frequency (RF) capacitively coupled plasmas, operated both in single-frequency (SF) and dual-frequency (DF) regimes. An RF (60/2 MHz) source is applied on the bottom electrode to sustain the discharge, and a dc source is fixed on the top electrode. The heating mechanism appears to be very different in dc superposed SF and DF discharges. When only a single source of 60 MHz is applied, the plasma bulk region is reduced by the dc source, thus the ionization rate and hence the electron density decrease with rising dc voltage. However, when a DF source of 60 and 2 MHz is applied, the electron density can increase upon addition of a dc voltage, depending on the gap length and applied dc voltage. This is explained from the spatiotemporal ionization rates in the DF discharge. In fact, a completely different behavior is observed for the ionization rate in the two half-periods of the LF source. In the first LF half-period, the situation resembles the dc superposed SF discharge, and the reduced plasma bulk region due to the negative dc bias results in a very small effective discharge area and a low ionization rate. On the other hand, in the second half-period, the negative dc bias is to some extent counteracted by the LF voltage, and the sheath close to the dc electrode becomes particularly thin. Consequently, the amplitude of the high-frequency sheath oscillations at the top electrode is largely enhanced, while the LF sheath at the bottom electrode is in its expanding phase and can thus well confine the high-energy electrons. Therefore, the ionization rate increases considerably in this second LF half-period. Furthermore, in addition to the comparison between SF and DF discharges and the effect of gap length and dc voltage, the effect of secondary electrons is examined. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
Institute of Physics |
Place of Publication |
Bristol |
Editor |
|
Language |
|
Wos |
000317275400016 |
Publication Date |
2013-03-28 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0963-0252;1361-6595; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
3.302 |
Times cited |
9 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 3.302; 2013 IF: 3.056 |
Call Number |
UA @ lucian @ c:irua:106877 |
Serial |
1413 |
Permanent link to this record |
|
|
|
Author |
Van der Paal, J.; Aernouts, S.; van Duin, A.C.T.; Neyts, E.C.; Bogaerts, A. |
Title |
Interaction of O and OH radicals with a simple model system for lipids in the skin barrier : a reactive molecular dynamics investigation for plasma medicine |
Type |
A1 Journal article |
Year |
2013 |
Publication |
Journal of physics: D: applied physics |
Abbreviated Journal |
J Phys D Appl Phys |
Volume |
46 |
Issue |
39 |
Pages |
395201 |
Keywords ![sorted by Keywords field, descending order (down)](img/sort_desc.gif) |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
Plasma medicine has been claimed to provide a novel route to heal wounds and regenerate skin, although very little is currently known about the elementary processes taking place. We carried out a series of ReaxFF-based reactive molecular dynamics simulations to investigate the interaction of O and OH radicals with lipids, more specifically with α-linolenic acid as a model for the free fatty acids present in the upper skin layer. Our calculations predict that the O and OH radicals most typically abstract a H atom from the fatty acids, which can lead to the formation of a conjugated double bond, but also to the incorporation of alcohol or aldehyde groups, thereby increasing the hydrophilic character of the fatty acids and changing the general lipid composition of the skin. Within the limitations of the investigated model, no formation of possibly toxic products was observed. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
London |
Editor |
|
Language |
|
Wos |
000324810400007 |
Publication Date |
2013-09-11 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0022-3727;1361-6463; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
2.588 |
Times cited |
36 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 2.588; 2013 IF: 2.521 |
Call Number |
UA @ lucian @ c:irua:109904 |
Serial |
1684 |
Permanent link to this record |
|
|
|
Author |
Van Gaens, W.; Bogaerts, A. |
Title |
Kinetic modelling for an atmospheric pressure argon plasma jet in humid air |
Type |
A1 Journal article |
Year |
2013 |
Publication |
Journal of physics: D: applied physics |
Abbreviated Journal |
J Phys D Appl Phys |
Volume |
46 |
Issue |
27 |
Pages |
275201-275253 |
Keywords ![sorted by Keywords field, descending order (down)](img/sort_desc.gif) |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
A zero-dimensional, semi-empirical model is used to describe the plasma chemistry in an argon plasma jet flowing into humid air, mimicking the experimental conditions of a setup from the Eindhoven University of Technology. The model provides species density profiles as a function of the position in the plasma jet device and effluent. A reaction chemistry set for an argon/humid air mixture is developed, which considers 84 different species and 1880 reactions. Additionally, we present a reduced chemistry set, useful for higher level computational models. Calculated species density profiles along the plasma jet are shown and the chemical pathways are explained in detail. It is demonstrated that chemically reactive H, N, O and OH radicals are formed in large quantities after the nozzle exit and H2, O2(1Δg), O3, H2O2, NO2, N2O, HNO2 and HNO3 are predominantly formed as 'long living' species. The simulations show that water clustering of positive ions is very important under these conditions. The influence of vibrational excitation on the calculated electron temperature is studied. Finally, the effect of varying gas temperature, flow speed, power density and air humidity on the chemistry is investigated. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
London |
Editor |
|
Language |
|
Wos |
000320854700009 |
Publication Date |
2013-06-18 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0022-3727;1361-6463; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
2.588 |
Times cited |
115 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 2.588; 2013 IF: 2.521 |
Call Number |
UA @ lucian @ c:irua:108725 |
Serial |
1758 |
Permanent link to this record |
|
|
|
Author |
Wendelen, W.; Mueller, B.Y.; Autrique, D.; Bogaerts, A.; Rethfeld, B. |
Title |
Modeling ultrashort laser-induced emission from a negatively biased metal |
Type |
A1 Journal article |
Year |
2013 |
Publication |
Applied physics letters |
Abbreviated Journal |
Appl Phys Lett |
Volume |
103 |
Issue |
22 |
Pages |
221603-221604 |
Keywords ![sorted by Keywords field, descending order (down)](img/sort_desc.gif) |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
A theoretical study of ultrashort laser-induced electron emission from a negatively biased metallic cathode has been performed. Classical as well as tunneling electron emission mechanisms are considered. It was found that electron emission is governed by an interplay of processes inside as well as above the cathode. A hybrid model is proposed, where the electron distribution within the target is retrieved from Boltzmann scattering integrals, while the charge distribution above it is studied by a Particle-In-Cell simulation. The results indicate that non-equilibrium effects determine the initial emission process, whereas the space charge above the target suppresses the effectively emitted charge. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
American Institute of Physics |
Place of Publication |
New York, N.Y. |
Editor |
|
Language |
|
Wos |
000327696300020 |
Publication Date |
2013-11-26 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0003-6951; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
3.411 |
Times cited |
8 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 3.411; 2013 IF: 3.515 |
Call Number |
UA @ lucian @ c:irua:111815 |
Serial |
2147 |
Permanent link to this record |
|
|
|
Author |
Tinck, S.; De Schepper, P.; Bogaerts, A. |
Title |
Numerical investigation of SiO2 coating deposition in wafer processing reactors with SiCl4/O2/Ar inductively coupled plasmas |
Type |
A1 Journal article |
Year |
2013 |
Publication |
Plasma processes and polymers |
Abbreviated Journal |
Plasma Process Polym |
Volume |
10 |
Issue |
8 |
Pages |
714-730 |
Keywords ![sorted by Keywords field, descending order (down)](img/sort_desc.gif) |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
Simulations and experiments are performed to obtain a better insight in the plasma enhanced chemical vapor deposition process of SiO2 by SiCl4/O2/Ar plasmas for introducing a SiO2-like coating in wafer processing reactors. Reaction sets describing the plasma and surface chemistry of the SiCl4/O2/Ar mixture are presented. Typical calculation results include the bulk plasma characteristics, i.e., electrical properties, species densities, and information on important production and loss processes, as well as the chemical composition of the deposited coating, and the thickness uniformity of the film on all reactor surfaces. The film deposition characteristics, and the trends for varying discharge conditions, are explained based on the plasma behavior, as calculated by the model. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Weinheim |
Editor |
|
Language |
|
Wos |
000327790000006 |
Publication Date |
2013-05-28 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1612-8850; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
2.846 |
Times cited |
3 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 2.846; 2013 IF: 2.964 |
Call Number |
UA @ lucian @ c:irua:109900 |
Serial |
2397 |
Permanent link to this record |
|
|
|
Author |
Shariat, M.; Shokri, B.; Neyts, E.C. |
Title |
On the low-temperature growth mechanism of single walled carbon nanotubes in plasma enhanced chemical vapor deposition |
Type |
A1 Journal article |
Year |
2013 |
Publication |
Chemical physics letters |
Abbreviated Journal |
Chem Phys Lett |
Volume |
590 |
Issue |
|
Pages |
131-135 |
Keywords ![sorted by Keywords field, descending order (down)](img/sort_desc.gif) |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
Despite significant progress in single walled carbon nanotube (SWCNT) production by plasma enhanced chemical vapor deposition (PECVD), the growth mechanism in this method is not clearly understood. We employ reactive molecular dynamics simulations to investigate how plasma-based deposition allows growth at low temperature. We first investigate the SWCNT growth mechanism at low and high temperatures under conditions similar to thermal CVD and PECVD. We then show how ion bombardment during the nucleation stage increases the carbon solubility in the catalyst at low temperature. Finally, we demonstrate how moderate energy ions sputter amorphous carbon allowing for SWCNT growth at 500 K. (C) 2013 Elsevier B. V. All rights reserved. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Amsterdam |
Editor |
|
Language |
|
Wos |
000327721000024 |
Publication Date |
2013-10-27 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0009-2614; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
1.815 |
Times cited |
14 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 1.815; 2013 IF: 1.991 |
Call Number |
UA @ lucian @ c:irua:112775 |
Serial |
2439 |
Permanent link to this record |
|
|
|
Author |
Shariat, M.; Hosseini, S.I.; Shokri, B.; Neyts, E.C. |
Title |
Plasma enhanced growth of single walled carbon nanotubes at low temperature : a reactive molecular dynamics simulation |
Type |
A1 Journal article |
Year |
2013 |
Publication |
Carbon |
Abbreviated Journal |
Carbon |
Volume |
65 |
Issue |
|
Pages |
269-276 |
Keywords ![sorted by Keywords field, descending order (down)](img/sort_desc.gif) |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
Low-temperature growth of carbon nanotubes (CNTs) has been claimed to provide a route towards chiral-selective growth, enabling a host of applications. In this contribution, we employ reactive molecular dynamics simulations to demonstrate how plasma-based deposition allows such low-temperature growth. We first show how ion bombardment during the growth affects the carbon dissolution and precipitation process. We then continue to demonstrate how a narrow ion energy window allows CNT growth at 500 K. Finally, we also show how CNTs in contrast cannot be grown in thermal CVD at this low temperature, but only at high temperature, in agreement with experimental data. (C) 2013 Elsevier Ltd. All rights reserved. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Oxford |
Editor |
|
Language |
|
Wos |
000326773200031 |
Publication Date |
2013-08-23 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0008-6223; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
6.337 |
Times cited |
21 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 6.337; 2013 IF: 6.160 |
Call Number |
UA @ lucian @ c:irua:112697 |
Serial |
2635 |
Permanent link to this record |
|
|
|
Author |
Ostrikov, K.; Neyts, E.C.; Meyyappan, M. |
Title |
Plasma nanoscience : from nano-solids in plasmas to nano-plasmas in solids |
Type |
A1 Journal article |
Year |
2013 |
Publication |
Advances in physics |
Abbreviated Journal |
Adv Phys |
Volume |
62 |
Issue |
2 |
Pages |
113-224 |
Keywords ![sorted by Keywords field, descending order (down)](img/sort_desc.gif) |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
The unique plasma-specific features and physical phenomena in the organization of nanoscale soild-state systems in a broad range of elemental composition, structure, and dimensionality are critically reviewed. These effects lead to the possibility to localize and control energy and matter at nanoscales and to produce self-organized nano-solids with highly unusual and superior properties. A unifying conceptual framework based on the control of production, transport, and self-organization of precursor species is introduced and a variety of plasma-specific non-equilibrium and kinetics-driven phenomena across the many temporal and spatial scales is explained. When the plasma is localized to micrometer and nanometer dimensions, new emergent phenomena arise. The examples range from semiconducting quantum dots and nanowires, chirality control of single-walled carbon nanotubes, ultra-fine manipulation of graphenes, nano-diamond, and organic matter to nano-plasma effects and nano-plasmas of different states of matter. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
London |
Editor |
|
Language |
|
Wos |
000320913600001 |
Publication Date |
2013-06-18 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0001-8732;1460-6976; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
21.818 |
Times cited |
380 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 21.818; 2013 IF: 18.062 |
Call Number |
UA @ lucian @ c:irua:108723 |
Serial |
2639 |
Permanent link to this record |
|
|
|
Author |
Autrique, D.; Gornushkin, I.; Alexiades, V.; Chen, Z.; Bogaerts, A.; Rethfeld, B. |
Title |
Revisiting the interplay between ablation, collisional, and radiative processes during ns-laser ablation |
Type |
A1 Journal article |
Year |
2013 |
Publication |
Applied physics letters |
Abbreviated Journal |
Appl Phys Lett |
Volume |
103 |
Issue |
17 |
Pages |
174102-174105 |
Keywords ![sorted by Keywords field, descending order (down)](img/sort_desc.gif) |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
A study of ns-laser ablation is presented, which focuses on the transient behavior of the physical processes that act in and above a copper sample. A dimensionless multiphase collisional radiative model describes the interplay between the ablation, collisional, and radiative mechanisms. Calculations are done for a 6 ns-Nd:YAG laser pulse operating at 532 nm and fluences up to 15 J/cm2. Temporal intensity profiles as well as transmissivities are in good agreement with experimental results. It is found that volumetric ablation mechanisms and photo-processes both play an essential role in the onset of ns-laser induced breakdown. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
American Institute of Physics |
Place of Publication |
New York, N.Y. |
Editor |
|
Language |
|
Wos |
000326455100107 |
Publication Date |
2013-10-21 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0003-6951; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
3.411 |
Times cited |
13 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 3.411; 2013 IF: 3.515 |
Call Number |
UA @ lucian @ c:irua:110944 |
Serial |
2906 |
Permanent link to this record |
|
|
|
Author |
Autrique, D.; Clair, G.; L'Hermite, D.; Alexiades, V.; Bogaerts, A.; Rethfeld, B. |
Title |
The role of mass removal mechanisms in the onset of ns-laser induced plasma formation |
Type |
A1 Journal article |
Year |
2013 |
Publication |
Journal of applied physics |
Abbreviated Journal |
J Appl Phys |
Volume |
114 |
Issue |
2 |
Pages |
023301-23310 |
Keywords ![sorted by Keywords field, descending order (down)](img/sort_desc.gif) |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
The present study focuses on the role of mass removal mechanisms in ns-laser ablation. A copper sample is placed in argon, initially set at standard pressure and temperature. Calculations are performed for a 6 ns laser pulse with a wavelength of 532 nm and laser fluences up to 10 J/cm2. The transient behavior in and above the copper target is described by a hydrodynamic model. Transmission profiles and ablation depths are compared with experimental results and similar trends are found. Our calculations reveal an interesting self-inhibiting mechanism: volumetric mass removal in the supercritical region triggers plasma shielding and therefore stops proceeding. This self-limiting process indicates that volumetric mass removal does not necessarily result in large ablation depths. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
American Institute of Physics |
Place of Publication |
New York, N.Y. |
Editor |
|
Language |
|
Wos |
000321761600006 |
Publication Date |
2013-07-08 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0021-8979; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
2.068 |
Times cited |
31 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 2.068; 2013 IF: 2.185 |
Call Number |
UA @ lucian @ c:irua:109237 |
Serial |
2915 |
Permanent link to this record |
|
|
|
Author |
Zhang, S.; Van Gaens, W.; van Gessel, B.; Hofmann, S.; van Veldhuizen, E.; Bogaerts, A.; Bruggeman, P. |
Title |
Spatially resolved ozone densities and gas temperatures in a time modulated RF driven atmospheric pressure plasma jet : an analysis of the production and destruction mechanisms |
Type |
A1 Journal article |
Year |
2013 |
Publication |
Journal of physics: D: applied physics |
Abbreviated Journal |
J Phys D Appl Phys |
Volume |
46 |
Issue |
20 |
Pages |
205202-205212 |
Keywords ![sorted by Keywords field, descending order (down)](img/sort_desc.gif) |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
In this work, a time modulated RF driven DBD-like atmospheric pressure plasma jet in Ar + 2%O2, operating at a time averaged power of 6.5 W is investigated. Spatially resolved ozone densities and gas temperatures are obtained by UV absorption and Rayleigh scattering, respectively. Significant gas heating in the core of the plasma up to 700 K is found and at the position of this increased gas temperature a depletion of the ozone density is found. The production and destruction reactions of O3 in the jet effluent as a function of the distance from the nozzle are obtained from a zero-dimensional chemical kinetics model in plug flow mode which considers relevant air chemistry due to air entrainment in the jet fluent. A comparison of the measurements and the models show that the depletion of O3 in the core of the plasma is mainly caused by an enhanced destruction of O3 due to a large atomic oxygen density. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
London |
Editor |
|
Language |
|
Wos |
000318546100008 |
Publication Date |
2013-05-02 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0022-3727;1361-6463; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
2.588 |
Times cited |
74 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 2.588; 2013 IF: 2.521 |
Call Number |
UA @ lucian @ c:irua:107840 |
Serial |
3067 |
Permanent link to this record |
|
|
|
Author |
Somers, W.; Bogaerts, A.; van Duin, A.C.T.; Huygh, S.; Bal, K.M.; Neyts, E.C. |
Title |
Temperature influence on the reactivity of plasma species on a nickel catalyst surface : an atomic scale study |
Type |
A1 Journal article |
Year |
2013 |
Publication |
Catalysis today |
Abbreviated Journal |
Catal Today |
Volume |
211 |
Issue |
|
Pages |
131-136 |
Keywords ![sorted by Keywords field, descending order (down)](img/sort_desc.gif) |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
In recent years, the potential use of hydrogen as a clean energy source has gained considerable attention. Especially H2 formation by Ni-catalyzed reforming of methane at elevated temperatures is an attractive process. However, a more fundamental knowledge at the atomic level is needed for a full comprehension of the reactions at the catalyst surface. In this contribution, we therefore investigate the H2 formation after CHx impacts on a Ni(1 1 1) surface in the temperature range 4001600 K, by means of reactive molecular dynamics (MD) simulations using the ReaxFF potential. While some H2 formation is already observed at the lower temperatures, substantial H2 formation is only obtained at elevated temperatures of 1400 K and above. At 1600 K, the H2 molecules are even the most frequently formed species. In direct correlation with the increasing dehydrogenation at elevated temperatures, an increased surface-to-subsurface C-diffusivity is observed as well. This study highlights the major importance of the temperature on the H2 formation. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Amsterdam |
Editor |
|
Language |
|
Wos |
000320697800020 |
Publication Date |
2013-03-25 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0920-5861; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
4.636 |
Times cited |
27 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 4.636; 2013 IF: 3.309 |
Call Number |
UA @ lucian @ c:irua:108675 |
Serial |
3500 |
Permanent link to this record |
|
|
|
Author |
Cornil, D.; Li, H.; Wood, C.; Pourtois, G.; Bredas, J.-L.; Cornil, J. |
Title |
Work-function modification of Au and Ag surfaces upon deposition of self-assembled monolayers : influence of the choice of the theoretical approach and the thiol decomposition scheme |
Type |
A1 Journal article |
Year |
2013 |
Publication |
ChemPhysChem : a European journal of chemical physics and physical chemistry |
Abbreviated Journal |
Chemphyschem |
Volume |
14 |
Issue |
13 |
Pages |
2939-2946 |
Keywords ![sorted by Keywords field, descending order (down)](img/sort_desc.gif) |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
We have characterized theoretically the work-function modifications of the (111) surfaces of gold and silver upon deposition of self-assembled monolayers based on methanethiol and trifluoromethanethiol. A comparative analysis is made between the experimental results and those obtained from two widely used approaches based on density functional theory. The contributions to the total work-function modifications are estimated on the basis of two decomposition schemes of the thiol molecules that have been proposed in the literature. The contributions are found to differ significantly between the two approaches, as do the corresponding adsorption energies. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Weinheim |
Editor |
|
Language |
|
Wos |
000324316000014 |
Publication Date |
2013-07-15 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1439-4235; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
3.075 |
Times cited |
9 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 3.075; 2013 IF: 3.360 |
Call Number |
UA @ lucian @ c:irua:112278 |
Serial |
3923 |
Permanent link to this record |
|
|
|
Author |
Roland, M.; Serrano-Ortiz, P.; Kowalski, A.S.; Van Grieken, R.; Janssens, I.A.; et al. |
Title |
Atmospheric turbulence triggers pronounced diel pattern in karst carbonate geochemistry |
Type |
A1 Journal article |
Year |
2013 |
Publication |
Biogeosciences |
Abbreviated Journal |
|
Volume |
10 |
Issue |
7 |
Pages |
5009-5017 |
Keywords ![sorted by Keywords field, descending order (down)](img/sort_desc.gif) |
A1 Journal article; Plant and Ecosystems (PLECO) – Ecology in a time of change; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation) |
Abstract |
CO2 exchange between terrestrial ecosystems and the atmosphere is key to understanding the feedbacks between climate change and the land surface. In regions with carbonaceous parent material, CO2 exchange patterns occur that cannot be explained by biological processes, such as disproportionate outgassing during the daytime or night-time CO2 uptake during periods when all vegetation is senescent. Neither of these phenomena can be attributed to carbonate weathering reactions, since their CO2 exchange rates are too small. Soil ventilation induced by high atmospheric turbulence is found to explain atypical CO2 exchange between carbonaceous systems and the atmosphere. However, by strongly altering subsurface CO2 concentrations, ventilation can be expected to influence carbonate weathering rates. By imposing ventilation-driven CO2 outgassing in a carbonate weathering model, we show here that carbonate geochemistry is accelerated and does play a surprisingly large role in the observed CO2 exchange pattern of a semi-arid ecosystem. We found that by rapidly depleting soil CO2 during the daytime, ventilation disturbs soil carbonate equilibria and therefore strongly magnifies daytime carbonate precipitation and associated CO2 production. At night, ventilation ceases and the depleted CO2 concentrations increase steadily. Dissolution of carbonate is now enhanced, which consumes CO2 and largely compensates for the enhanced daytime carbonate precipitation. This is why only a relatively small effect on global carbonate weathering rates is to be expected. On the short term, however, ventilation has a drastic effect on synoptic carbonate weathering rates, resulting in a pronounced diel pattern that exacerbates the non-biological behavior of soil-atmosphere CO2 exchanges in dry regions with carbonate soils. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
000322242700039 |
Publication Date |
2013-07-24 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1726-4170; 1726-4189 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
|
Times cited |
|
Open Access |
|
Notes |
|
Approved |
no |
Call Number |
UA @ admin @ c:irua:109862 |
Serial |
7533 |
Permanent link to this record |
|
|
|
Author |
Mortier, S.T.F.C.; Van Hoey, S.; Cierkens, K.; Gernaey, K.V.; Seuntjens, P.; De Baets, B.; De Beer, T.; Nopens, I. |
Title |
A GLUE uncertainty analysis of a drying model of pharmaceutical granules |
Type |
A1 Journal article |
Year |
2013 |
Publication |
European journal of pharmaceutics and biopharmaceutics |
Abbreviated Journal |
|
Volume |
85 |
Issue |
3:b |
Pages |
984-995 |
Keywords ![sorted by Keywords field, descending order (down)](img/sort_desc.gif) |
A1 Journal article; Pharmacology. Therapy; Sustainable Energy, Air and Water Technology (DuEL) |
Abstract |
A shift from batch processing towards continuous processing is of interest in the pharmaceutical industry. However, this transition requires detailed knowledge and process understanding of all consecutive unit operations in a continuous manufacturing line to design adequate control strategies. This can be facilitated by developing mechanistic models of the multi-phase systems in the process. Since modelling efforts only started recently in this field, uncertainties about the model predictions are generally neglected. However, model predictions have an inherent uncertainty (i.e. prediction uncertainty) originating from uncertainty in input data, model parameters, model structure, boundary conditions and software. In this paper, the model prediction uncertainty is evaluated for a model describing the continuous drying of single pharmaceutical wet granules in a six-segmented fluidized bed drying unit, which is part of the full continuous from-powder-to-tablet manufacturing line (Consigma (TM), GEA Pharma Systems). A validated model describing the drying behaviour of a single pharmaceutical granule in two consecutive phases is used. First of all, the effect of the assumptions at the particle level on the prediction uncertainty is assessed. Secondly, the paper focuses on the influence of the most sensitive parameters in the model. Finally, a combined analysis (particle level plus most sensitive parameters) is performed and discussed. To propagate the uncertainty originating from the parameter uncertainty to the model output, the Generalized Likelihood Uncertainty Estimation (GLUE) method is used. This method enables a modeller to incorporate the information obtained from the experimental data in the assessment of the uncertain model predictions and to find a balance between model performance and data precision. A detailed evaluation of the obtained uncertainty analysis results is made with respect to the model structure, interactions between parameters and uncertainty boundaries. (C) 2013 Elsevier B.V. All rights reserved. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
000330200800019 |
Publication Date |
2013-03-29 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0939-6411 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
|
Times cited |
|
Open Access |
|
Notes |
|
Approved |
no |
Call Number |
UA @ admin @ c:irua:114876 |
Serial |
8005 |
Permanent link to this record |
|
|
|
Author |
Filippousi, M.; Papadimitriou, S.A.; Bikiaris, D.N.; Pavlidou, E.; Angelakeris, M.; Zamboulis, D.; Tian, H.; Van Tendeloo, G. |
Title |
Novel coreshell magnetic nanoparticles for Taxol encapsulation in biodegradable and biocompatible block copolymers : preparation, characterization and release properties |
Type |
A1 Journal article |
Year |
2013 |
Publication |
International journal of pharmaceutics |
Abbreviated Journal |
Int J Pharmaceut |
Volume |
448 |
Issue |
1 |
Pages |
221-230 |
Keywords ![sorted by Keywords field, descending order (down)](img/sort_desc.gif) |
A1 Journal article; Pharmacology. Therapy; Electron microscopy for materials research (EMAT) |
Abstract |
Theranostic polymeric nanocarriers loaded with anticancer drug Taxol and superparamagnetic iron oxide nanocrystals have been developed for possible magnetic resonance imaging (MRI) use and cancer therapy. Multifunctional nanocarriers with a coreshell structure have been prepared by coating superparamagnetic Fe3O4 nanoparticles with block copolymer of poly(ethylene glycol)-b-poly(propylene succinate) with variable molecular weights of the hydrophobic block poly(prolylene succinate). The multifunctional polymer nano-vehicles were prepared using a nanoprecipitation method. Scanning transmission electron microscopy revealed the encapsulation of magnetic nanoparticles inside the polymeric matrix. Energy dispersive X-ray spectroscopy and electron energy loss spectroscopy mapping allowed us to determine the presence of the different material ingredients in a quantitative way. The diameter of the nanoparticles is below 250 nm yielding satisfactory encapsulation efficiency. The nanoparticles exhibit a biphasic drug release pattern in vitro over 15 days depending on the molecular weight of the hydrophobic part of the polymer matrix. These new systems where anti-cancer therapeutics like Taxol and iron oxide nanoparticles (IOs) are co-encapsulated into new facile polymeric nanoparticles, could be addressed as potential multifunctional vehicles for simultaneous drug delivery and targeting imaging as well as real time monitoring of therapeutic effects. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Amsterdam |
Editor |
|
Language |
|
Wos |
000319052000026 |
Publication Date |
2013-03-21 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0378-5173; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
3.649 |
Times cited |
29 |
Open Access |
|
Notes |
Countatoms |
Approved |
Most recent IF: 3.649; 2013 IF: 3.785 |
Call Number |
UA @ lucian @ c:irua:107348 |
Serial |
2374 |
Permanent link to this record |
|
|
|
Author |
Satyawali, Y.; Van Roy, S.; Roevens, A.; Meynen, V.; Mullens, S.; Jochems, P.; Doyen, W.; Cauwenberghs, L.; Dejonghe, W. |
Title |
Characterization and analysis of the adsorption immobilization mechanism of \beta-galactosidase on metal oxide powders |
Type |
A1 Journal article |
Year |
2013 |
Publication |
RSC advances |
Abbreviated Journal |
|
Volume |
3 |
Issue |
46 |
Pages |
24054-24062 |
Keywords ![sorted by Keywords field, descending order (down)](img/sort_desc.gif) |
A1 Journal article; Laboratory of adsorption and catalysis (LADCA); Sustainable Energy, Air and Water Technology (DuEL) |
Abstract |
Immobilization of the enzymes plays a vital role in enhancing their applicability in a wide range of applications, thus ensuring the use of sustainable enzymatic processes over the conventional chemical processes on an industrial scale. This study provides the background information for the selection and screening of inorganic metal oxide (MO) powders for their use as fillers in mixed matrix membranes for enzyme immobilization as the future aim. A total of 13 MOs, ranging in size from 0.01 μm to <5 μm, were tested for their performance as a support for enzyme (β-galactosidase) immobilization via adsorption. Alumina appeared to be the best performing MO with the amount and activity of the immobilized enzyme being 64 mg g−1 and up to 288 U g−1, respectively. The amount of immobilized enzyme on alumina (α-Al2O3 C and γ-Al2O3) was >3 times higher than ZrO2 (used as a reference MO in this study). Upon heat treatment at 900 °C, up to 15%, 52% and 42% decline was observed in the amount of immobilized enzyme in case of alumina metal oxides (MOs), ZrO2 and TiO2, respectively. The results suggested that both isoelectric point and surface area of the MO influence the immobilization. The most important observation in this study was that the bonding of the enzyme to the MO surface seems to be mediated by the bonding/interaction of the buffer to the enzyme. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
000326745100030 |
Publication Date |
2013-10-11 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
2046-2069 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
|
Times cited |
|
Open Access |
|
Notes |
|
Approved |
no |
Call Number |
UA @ admin @ c:irua:111300 |
Serial |
7607 |
Permanent link to this record |
|
|
|
Author |
Verreydt, G.; Annable, M.D.; Kaskassian, S.; van Keer, I.; Bronders, J.; Diels, L.; Vanderauwera, P. |
Title |
Field demonstration and evaluation of the passive flux meter on a CAH groundwater plume |
Type |
A1 Journal article |
Year |
2013 |
Publication |
Environmental Science and Pollution Research |
Abbreviated Journal |
|
Volume |
20 |
Issue |
7 |
Pages |
4621-4634 |
Keywords ![sorted by Keywords field, descending order (down)](img/sort_desc.gif) |
A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL); Biochemical Wastewater Valorization & Engineering (BioWaVE) |
Abstract |
This study comprises the first application of the Passive Flux Meter (PFM) for the measurement of chlorinated aliphatic hydrocarbon (CAH) mass fluxes and Darcy water fluxes in groundwater at a European field site. The PFM was originally developed and applied to measurements near source zones. The focus of the PFM is extended from near source to plume zones. For this purpose, 48 PFMs of 1.4 m length were constructed and installed in eight different monitoring wells in the source and plume zone of a CAH-contaminated field site located in France. The PFMs were retrieved, sampled, and analyzed after 3 to 11 weeks of exposure time, depending on the expected contaminant flux. PFM evaluation criteria include analytical, technical, and practical aspects as well as conditions and applicability. PFM flux data were compared with so-called traditional soil and groundwater concentration data obtained using active sampling methods. The PFMs deliver reasonable results for source as well as plume zones. The limiting factor in the PFM applicability is the exposure time together with the groundwater flux. Measured groundwater velocities at the field site range from 2 to 41 cm/day. Measured contaminant flux data raise up to 13 g/m(2)/day for perchloroethylene in the plume zone. Calculated PFM flux averaged concentration data and traditional concentration data were of similar magnitude for most wells. However, both datasets need to be compared with reservation because of the different sampling nature and time. Two important issues are the PFM tracer loss during installation/extraction and the deviation of the groundwater flow field when passing the monitoring well and PFM. The demonstration of the PFM at a CAH-contaminated field site in Europe confirmed the efficiency of the flux measurement technique for source as well as plume zones. The PFM can be applied without concerns in monitoring wells with European standards. The acquired flux data are of great value for the purpose of site characterization and mass discharge modeling, and can be used in combination with traditional soil and groundwater sampling methods. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
000321126700030 |
Publication Date |
2013-01-02 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0944-1344; 1614-7499 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
|
Times cited |
|
Open Access |
|
Notes |
|
Approved |
no |
Call Number |
UA @ admin @ c:irua:109817 |
Serial |
7965 |
Permanent link to this record |
|
|
|
Author |
Van Eynde, E.; Tytgat, T.; Smits, M.; Verbruggen, S.W.; Hauchecorne, B.; Lenaerts, S. |
Title |
Biotemplated diatom silica-titania materials for air purification |
Type |
A1 Journal article |
Year |
2013 |
Publication |
Photochemical & photobiological sciences |
Abbreviated Journal |
Photoch Photobio Sci |
Volume |
12 |
Issue |
4 |
Pages |
690-695 |
Keywords ![sorted by Keywords field, descending order (down)](img/sort_desc.gif) |
A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL) |
Abstract |
We present a novel manufacture route for silicatitania photocatalysts using the diatom microalga Pinnularia sp. Diatoms self-assemble into porous silica cell walls, called frustules, with periodic micro-, meso- and macroscale features. This unique hierarchical porous structure of the diatom frustule is used as a biotemplate to incorporate titania by a solgel methodology. Important material characteristics of the modified diatom frustules under study are morphology, crystallinity, surface area, pore size and optical properties. The produced biosilicatitania material is evaluated towards photocatalytic activity for NOx abatement under UV radiation. This research is the first step to obtain sustainable, well-immobilised silicatitania photocatalysts using diatoms. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
000316572500016 |
Publication Date |
2012-10-25 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1474-905x; 1474-9092 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
2.344 |
Times cited |
18 |
Open Access |
|
Notes |
; ; |
Approved |
Most recent IF: 2.344; 2013 IF: 2.939 |
Call Number |
UA @ admin @ c:irua:106625 |
Serial |
5930 |
Permanent link to this record |
|
|
|
Author |
Van Wesenbeeck, K.; Hauchecorne, B.; Lenaerts, S. |
Title |
Integration of a photocatalytic coating in a corona discharge unit for plasma assisted catalysis |
Type |
A1 Journal article |
Year |
2013 |
Publication |
Journal of environmental solutions |
Abbreviated Journal |
|
Volume |
2 |
Issue |
1 |
Pages |
16-24 |
Keywords ![sorted by Keywords field, descending order (down)](img/sort_desc.gif) |
A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL) |
Abstract |
The combination of a non-thermal plasma with catalysis is considered as a sustainable indoor air purification technology to achieve complete oxidation at reduced energy cost with a longer electrode lifetime. An optimal window of operation for plasma assisted catalysis is found by varying the polarity, the applied voltage, the relative humidity of the gas phase and the configuration of the plasma reactor. The results show that, in general, negative corona discharge can obtain higher nitric oxide (NO) conversion efficiencies compared to positive corona. It is also clear that at higher applied voltages, higher conversion efficiency can be reached. The effect of relative humidity, however, is not found to be significant in the range (0 20.3 %) tested in this work. Additionally, the configuration of the plasma reactor is changed by varying the amount of pins that are attached at the collector electrode. The results show that there is an optimum at 10 pairs of pins to obtain a high conversion efficiency of NO. By applying a coating on the collector electrode of the plasma reactor, it is possible to see the influence of the coating on the performance of the plasma system, which was operating in the previously found optimal window. It stands clear that the use of a plasma assisted catalysis system has high potential as an integrated and sustainable indoor air purification technology. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
|
Publication Date |
|
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
|
ISBN |
|
Additional Links |
UA library record |
Impact Factor |
|
Times cited |
|
Open Access |
|
Notes |
|
Approved |
Most recent IF: NA |
Call Number |
UA @ admin @ c:irua:108646 |
Serial |
5966 |
Permanent link to this record |
|
|
|
Author |
Smits, M.; Chan, C. kit; Tytgat, T.; Craeye, B.; Costarramone, N.; Lacombe, S.; Lenaerts, S. |
Title |
Photocatalytic degradation of soot deposition : self-cleaning effect on titanium dioxide coated cementitious materials |
Type |
A1 Journal article |
Year |
2013 |
Publication |
Chemical engineering journal |
Abbreviated Journal |
Chem Eng J |
Volume |
222 |
Issue |
|
Pages |
411-418 |
Keywords ![sorted by Keywords field, descending order (down)](img/sort_desc.gif) |
A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL) |
Abstract |
Diesel soot emissions deteriorate the appearance of architectural building materials by soot fouling. This soot deposition devalue the aesthetic value of the building. A solution to counteract this problem is applying titanium dioxide on building materials. TiO2 can provide air-purifying and self-cleaning properties due to its photocatalytic activity. In literature, photocatalytic soot oxidation is observed on glass or silicon substrates. However, degradation of soot by photocatalysis was not yet investigated on cementitious samples (mortar, concrete) although it is one of the most frequently used building materials. In this study, photocatalytic soot oxidation by means of TiO2 coated cementitious samples is addressed. The soot removal capacity of four types of TiO2 layers, coated on mortar samples, is evaluated by means of two detection methods. The first method is based on colorimetric measurements, while the second method uses digital image processing to calculate the area of soot coverage. The experimental data revealed that cementitious materials coated with commercially available TiO2 exhibited self-cleaning properties as it was found that all coated samples were able to remove soot. The P25 coating gave the best soot degradation performance, while the Eoxolit product showed the slowest soot degradation rate. In addition, gas chromatography measurements in a closed chamber experiment with P25 confirmed that complete mineralization of about 60% of the soot was obtained within 24 hours since CO2 was the sole observed oxidation product. Due to its realistic approach, this study proves that photocatalytic soot removal on TiO2 coated cementitious surfaces is possible in practice, which is an important step towards the practical application of self-cleaning building materials. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
000319528900046 |
Publication Date |
2013-03-05 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1385-8947; 1873-3212 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
6.216 |
Times cited |
43 |
Open Access |
|
Notes |
; This work was supported by a PhD grant (M. Smits) from the University of Antwerp, a PhD grant (T. Tytgat) funded by the Institute of Innovation by Science and Technology in Flanders (IWT) and the exchange program Tournesol (Project T2012.05) financed by the Flemish government. ; |
Approved |
Most recent IF: 6.216; 2013 IF: 4.058 |
Call Number |
UA @ admin @ c:irua:106519 |
Serial |
5979 |
Permanent link to this record |
|
|
|
Author |
Verbruggen, S.W.; Keulemans, M.; Martens, J.A.; Lenaerts, S. |
Title |
Predicting the surface plasmon resonance wavelength of gold-silver alloy nanoparticles |
Type |
A1 Journal article |
Year |
2013 |
Publication |
The journal of physical chemistry: C : nanomaterials and interfaces |
Abbreviated Journal |
J Phys Chem C |
Volume |
117 |
Issue |
37 |
Pages |
19142-19145 |
Keywords ![sorted by Keywords field, descending order (down)](img/sort_desc.gif) |
A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL) |
Abstract |
Gold-silver alloy nanoparticles display surface plasmon resonance (SPR) over a broad range of the UV-vis spectrum. We propose a model to predict the SPR wavelength of gold-silver alloy colloids based on the combined effect of alloy composition and particle size. The SPR wavelength is derived from extinction spectra simulated using available experimental dielectric constant data and accounts for particle size by applying Mie theory. Comparison of calculated values with experimental data evidences the accuracy of the model. The new SPR wavelength estimation tool will be of particular interest for developing dedicated bimetallic plasmonic nanostructures. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
000330162600042 |
Publication Date |
2013-08-27 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1932-7447; 1932-7455 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
4.536 |
Times cited |
51 |
Open Access |
|
Notes |
; S.W.V. acknowledges the Research Foundation of Flanders (FWO) for financial support. JAM. acknowledges the Flemish government for long-term structural funding (Methusalem). ; |
Approved |
Most recent IF: 4.536; 2013 IF: 4.835 |
Call Number |
UA @ admin @ c:irua:114837 |
Serial |
5985 |
Permanent link to this record |
|
|
|
Author |
Verbruggen, S.W.; Dirckx, J.J.J.; Martens, J.A.; Lenaerts, S. |
Title |
Surface photovoltage measurements : a quick assessment of the photocatalytic activity? |
Type |
A1 Journal article |
Year |
2013 |
Publication |
Catalysis today |
Abbreviated Journal |
Catal Today |
Volume |
209 |
Issue |
|
Pages |
215-220 |
Keywords ![sorted by Keywords field, descending order (down)](img/sort_desc.gif) |
A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL) |
Abstract |
Surface photovoltage (SPV) measurements can contribute to a better understanding of electronic properties of photocatalysts under illumination. Direct linking of SPV data to the actual photocatalytic activity remains troublesome. This work aims to discuss SPV measurements from a photocatalytic point of view. By means of several application-based scenarios we illustrate that the trend between SPV and photocatalysis strongly depends on parameters such as the crystal structure, surface modifications, morphology and humidity. This makes the interpretation far from straightforward. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
000319498800035 |
Publication Date |
2013-01-16 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0920-5861 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
4.636 |
Times cited |
8 |
Open Access |
|
Notes |
; ; |
Approved |
Most recent IF: 4.636; 2013 IF: 3.309 |
Call Number |
UA @ admin @ c:irua:106520 |
Serial |
5995 |
Permanent link to this record |
|
|
|
Author |
Hauchecorne, B.; Lenaerts, S. |
Title |
Unravelling the mysteries of gas phase photocatalytic reaction pathways by studying the catalyst surface : a literature review of different Fourier transform infrared spectroscopic reaction cells used in the field |
Type |
A1 Journal article |
Year |
2013 |
Publication |
Journal of photochemistry and photobiology: C: photochemistry reviews |
Abbreviated Journal |
J Photoch Photobio C |
Volume |
14 |
Issue |
|
Pages |
72-85 |
Keywords ![sorted by Keywords field, descending order (down)](img/sort_desc.gif) |
A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL) |
Abstract |
Unlike the profound knowledge of the reaction mechanisms occurring in water phase photocatalysis, still fairly little is known on the reaction mechanisms occurring on the catalyst surface when dealing with gaseous pollutants. Unfortunately, there are some differences between both reactions. For one, there are no abundant hydroxyl radicals present in the gas phase, so that possibly other species prove to be important in abating the pollutant. In order to unravel the mysteries of gas phase photocatalytic reaction pathways, in situ techniques must be used to allow the detection and identification of reaction intermediates on a working catalyst. Several techniques were already used in the past, of which Fourier transform infrared spectroscopy seems to be the most versatile. This review will therefore give a selective overview of different spectroscopic reaction cells constructed for the in situ study of photocatalytic gas phase reactions. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
000314669600005 |
Publication Date |
2012-09-28 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1389-5567 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
12.317 |
Times cited |
8 |
Open Access |
|
Notes |
; The University of Antwerp is greatly acknowledged for the fellowship granted to Birger Hauchecorne. The authors would also like to thank Sammy W. Verbruggen for his help in providing several papers of interest. ; |
Approved |
Most recent IF: 12.317; 2013 IF: 11.625 |
Call Number |
UA @ admin @ c:irua:106518 |
Serial |
6001 |
Permanent link to this record |
|
|
|
Author |
De Baere, K.; Verstraelen, H.; Rigo, P.; Van Passel, S.; Lenaerts, S.; Potters, G. |
Title |
Study on alternative approaches to corrosion protection of ballast tanks using an economic model |
Type |
A1 Journal article |
Year |
2013 |
Publication |
Marine structures |
Abbreviated Journal |
Mar Struct |
Volume |
32 |
Issue |
|
Pages |
1-17 |
Keywords ![sorted by Keywords field, descending order (down)](img/sort_desc.gif) |
A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL) |
Abstract |
One of the most relevant problems in ship construction and maintenance nowadays is corrosion in ballast tanks of modern merchant vessels. On the one hand, there is a general consensus that the economic lifespan of such a vessel depends, to a large degree, upon the corrosion state of its ballast tanks, while on the other hand these ballast tanks, located between the outer hull and the cargo tanks, makes routine inspection and maintenance a difficult task. Today, ship's ballast tanks are usually constructed in steel and protected with an epoxy coating backed up by sacrificial zinc anodes. Such a construction has been applied without significant alterations for many years. The objective of this economic study is to compare this construction method with some potential alternatives. The considered alternatives are: (1) an increase in structural scantlings, eliminating the necessity to replace corroded at a cost of real cargo carrying capacity of the ship, (2) application of the novel and more durable TSCF25 coating (3), the use of corrosion resistant steel in ship construction and (4) a standard PSPC15 coating combined with lifetime lasting aluminum sacrificial anodes. A cost model was used to evaluate these alternative options together with sensitivity analysis. It is concluded that the durable coating and the use of lifetime lasting aluminum anodes are bound to improve the actual basic tank concept. Corrosion resistant steel becomes attractive when the steel price becomes competitive. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
000319643500001 |
Publication Date |
2013-03-27 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0951-8339 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
2.052 |
Times cited |
15 |
Open Access |
|
Notes |
; ; |
Approved |
Most recent IF: 2.052; 2013 IF: 1.242 |
Call Number |
UA @ admin @ c:irua:109346 |
Serial |
6253 |
Permanent link to this record |
|
|
|
Author |
De Baere, K.; Verstraelen, H.; Rigo, P.; Van Passel, S.; Lenaerts, S.; Potters, G. |
Title |
Reducing the cost of ballast tank corrosion : an economic modeling approach |
Type |
A1 Journal article |
Year |
2013 |
Publication |
Marine structures |
Abbreviated Journal |
Mar Struct |
Volume |
32 |
Issue |
|
Pages |
136-152 |
Keywords ![sorted by Keywords field, descending order (down)](img/sort_desc.gif) |
A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL) |
Abstract |
One of the most relevant problems in ship construction and maintenance nowadays concerns the corrosion in the double hull space ballast tanks of modern merchant vessels. On the one hand, there is a general consensus that the economic life span of such a vessel depends primarily upon the corrosion state of its ballast tanks, while on the other hand, the position of these tanks, squeezed between the outer hull and the loading tanks, makes routine inspection and maintenance almost impossible. Today, ship's ballast tanks are usually constructed in grade A steel and protected with a standard epoxy coating, backed up with sacrificial zinc anodes. Such a construction has been applied without significant alterations for many years. However, the objective of this economic study is to compare this construction method with some feasible alternatives. The considered alternatives are: (1) an increase of the scantlings, eliminating the necessity to replace corroded steel but diminishing the cargo carrying capacity of the ship, (2) application of the novel and more durable TSCF25 coating (3), the use of corrosion resistant steel in ship construction or (4) a standard PSPC15 coating combined with lifetime lasting aluminum sacrificial anodes. After running each alternative through a cost model including an extensive sensitivity analysis, it is concluded that the durable coating and the use of lifetime lasting aluminum anodes are bound to improve the actual basic tank concept. Corrosion resistant steel becomes attractive depending upon the evolution of the international steel market. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
000319643500007 |
Publication Date |
2013-05-01 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0951-8339 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
2.052 |
Times cited |
9 |
Open Access |
|
Notes |
; ; |
Approved |
Most recent IF: 2.052; 2013 IF: 1.242 |
Call Number |
UA @ admin @ c:irua:109347 |
Serial |
6240 |
Permanent link to this record |
|
|
|
Author |
Tavkhelidze, I.; Cassisa, C.; Gielis, J.; Ricci, P.E. |
Title |
About “bulky” links, generated by generalized Möbius Listing's bodies GML3n |
Type |
A1 Journal article |
Year |
2013 |
Publication |
Matematica e applicazioni : atti della Accademia nazionale dei Lincei |
Abbreviated Journal |
|
Volume |
24 |
Issue |
1 |
Pages |
11-38 |
Keywords ![sorted by Keywords field, descending order (down)](img/sort_desc.gif) |
A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL) |
Abstract |
In the present paper we consider the “bulky knots'' and ”bulky links'', which appear after cutting a Generalized Möbius Listing's GMLn3 body (whose radial cross section is a plane 3-symmetric figure with three vertices) along different Generalized Möbius Listing's surfaces GMLn2 situated in it. This article is aimed to investigate the number and geometric structure of the independent objects appearing after such a cutting process of GMLn3 bodies. In most cases we are able to count the indices of the resulting mathematical objects according to the known tabulation for Knots and Links of small complexity. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
000316567700002 |
Publication Date |
2013-03-13 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1120-6357 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
|
Times cited |
|
Open Access |
|
Notes |
|
Approved |
no |
Call Number |
UA @ admin @ c:irua:107174 |
Serial |
7405 |
Permanent link to this record |
|
|
|
Author |
de Baerdemaeker, T.; Lemmens, B.; Dotremont, C.; Fret, J.; Roef, L.; Goiris, K.; Diels, L. |
Title |
Benchmark study on algae harvesting with backwashable submerged flat panel membranes |
Type |
A1 Journal article |
Year |
2013 |
Publication |
Bioresource technology |
Abbreviated Journal |
|
Volume |
129 |
Issue |
|
Pages |
582-591 |
Keywords ![sorted by Keywords field, descending order (down)](img/sort_desc.gif) |
A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL) |
Abstract |
The feasibility of algae harvesting with submerged flat panel membranes was investigated as pre-concentration step prior to centrifugation. Polishing of the supernatant coming from the centrifuge was evaluated as well. The effect of membrane polymer (polyvinyl chloride [PVC], polyethersulfone polyvinyl-pyrollidone [PES-PVP], poly vinylidene fluoride [PVDF]), pore size (microfiltration [MF], ultrafiltration [UF]), algae cell concentrations and species were investigated at lab-scale. In addition, backwashing as fouling control was compared to standard relaxation. PVDF was the superior polymer, and UF showed better fouling resistance. Backwashing outperformed relaxation in fouling control. The backwashable membranes allowed up to 300% higher fluxes compared to commercial flat panel benchmark (PVC) membranes. Estimations on energy consumption for membrane filtration followed by centrifugation revealed relatively low values of 0.169 kW h/kg of dry weight of algae compared to 0.5 kW h/kg for algae harvesting via classical centrifuge alone. (C) 2012 Elsevier Ltd. All rights reserved. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
000324566000079 |
Publication Date |
2012-11-08 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0960-8524 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor |
|
Times cited |
|
Open Access |
|
Notes |
|
Approved |
no |
Call Number |
UA @ admin @ c:irua:111203 |
Serial |
7554 |
Permanent link to this record |
|
|
|
Author |
Caratelli, D.; Gielis, J.; Tavkhelidze, I.; Ricci, P.E. |
Title |
The Dirichlet problem for the Laplace equation in supershaped annuli |
Type |
A1 Journal article |
Year |
2013 |
Publication |
Boundary value problems |
Abbreviated Journal |
|
Volume |
|
Issue |
|
Pages |
113-10 |
Keywords ![sorted by Keywords field, descending order (down)](img/sort_desc.gif) |
A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL) |
Abstract |
The Dirichlet problem for the Laplace equation in normal-polar annuli is addressed by using a suitable Fourier-like technique. Attention is in particular focused on the wide class of domains whose boundaries are defined by the so-called superformula introduced by Gielis. A dedicated numerical procedure based on the computer algebra system Mathematica© is developed in order to validate the proposed methodology. In this way, highly accurate approximations of the solution, featuring properties similar to the classical ones, are obtained. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
000325760900002&DestLinkType=CitingArticles&DestApp=ALL_WOS&UsrCustomerID=ef845e08c439e550330acc77c7 |
Publication Date |
2013-05-03 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
1687-2762; 1687-2770 |
ISBN |
|
Additional Links |
UA library record; WoS citing articles; WoS full record |
Impact Factor |
|
Times cited |
|
Open Access |
|
Notes |
|
Approved |
no |
Call Number |
UA @ admin @ c:irua:108644 |
Serial |
7812 |
Permanent link to this record |