NANOlab Center of Excellence literature database -- Query Results

	NANOlab Center of Excellence literature database Home \| Show All \| Simple Search \| Advanced Search	Login Quick Search: Field: contains: ...
	2221–2250 of 4750 records found matching your query (RSS \| history):

Select All Deselect All

<< 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 >> [101–159]

List View

Citations

Details

	Records
	Author	Spreitzer, M.; Egoavil, R.; Verbeeck, J.; Blank, D.H.A.; Rijnders, G.
	Title	Pulsed laser deposition of SrTiO₃ on a H-terminated Si substrate			Type	A1 Journal article
	Year	2013	Publication	Journal of materials chemistry C : materials for optical and electronic devices	Abbreviated Journal	J Mater Chem C
	Volume	1	Issue	34	Pages	5216-5222
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Interfacing oxides with silicon is a long-standing problem related to the integration of multifunctional oxides with semiconductor devices and the replacement of SiO2 with high-k gate oxides. In our study, pulsed laser deposition was used to prepare a SrTiO3 (STO) thin film on a H-terminated Si substrate. The main purpose of our work was to verify the ability of H-termination against the oxidation of Si during the PLD process and to analyze the resulting interfaces. In the first part of the study, the STO was deposited directly on the Si, leading to the formation of a preferentially textured STO film with a (100) orientation. In the second part, SrO was used as a buffer layer, which enabled the partial epitaxial growth of STO with STO(110)parallel to Si(100) and STO[001]parallel to Si[001]. The change in the growth direction induced by the application of a SrO buffer was governed by the formation of a SrO(111) intermediate layer and subsequently by the minimization of the lattice misfit between the STO and the SrO. Under the investigated conditions, approximately 10 nm thick interfacial layers formed between the STO and the Si due to reactions between the deposited material and the underlying H-terminated Si. In the case of direct STO deposition, SiOx formed at the interface with the silicon, while in the case when SrO was used as a buffer, strontium silicate grew directly on the silicon, which improves the growth quality of the uppermost STO.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000322911900005	Publication Date	2013-07-12
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2050-7526;2050-7534;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	5.256	Times cited	23	Open Access
	Notes	Ifox; Esteem2; Vortex; Countatoms; esteem2jra3 ECASJO;			Approved	Most recent IF: 5.256; 2013 IF: NA
	Call Number	UA @ lucian @ c:irua:110798UA @ admin @ c:irua:110798			Serial	2739
Permanent link to this record



	Author	Altantzis, T.; Goris, B.; Sánchez-Iglesias, A.; Grzelczak, M.; Liz-Marzán, L.M.; Bals, S.
	Title	Quantitative structure determination of large three-dimensional nanoparticle assemblies			Type	A1 Journal article
	Year	2013	Publication	Particle and particle systems characterization	Abbreviated Journal	Part Part Syst Char
	Volume	30	Issue	1	Pages	84-88
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Thumbnail image of graphical abstract To investigate nanoassemblies in three dimensions, electron tomography is an important tool. For large nanoassemblies, it is not straightforward to obtain quantitative results in three dimensions. An optimized acquisition technique, incoherent bright field scanning transmission electron microscopy, is combined with an advanced 3D reconstruction algorithm. The approach is applied to quantitatively analyze large nanoassemblies in three dimensions.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Weinheim	Editor
	Language		Wos	000310806000008	Publication Date	2012-11-07
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0934-0866;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.474	Times cited	23	Open Access
	Notes	Goa; Fwo; 267867 Plasmaquo; 262348 Esmi			Approved	Most recent IF: 4.474; 2013 IF: 0.537
	Call Number	UA @ lucian @ c:irua:101776			Serial	2763
Permanent link to this record



	Author	Cao, S.; Nishida, M.; Schryvers, D.
	Title	Quantitative three-dimensional analysis of Ni₄Ti₃ precipitate morphology and distribution in polycrystalline Ni-Ti			Type	A1 Journal article
	Year	2011	Publication	Acta materialia	Abbreviated Journal	Acta Mater
	Volume	59	Issue	4	Pages	1780-1789
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The three-dimensional size, morphology and distribution of Ni4Ti3 precipitates in a Ni50.8Ti49.2 polycrystalline shape memory alloy with a heterogeneous microstructure have been investigated using a focused ion beam/scanning electron microscopy slice-and-view procedure. The mean volume, central plane diameter, thickness, aspect ratio and sphericity of the precipitates in the grain interior as well as near to the grain boundary were measured and/or calculated. The morphology of the precipitates was quantified by determining the equivalent ellipsoids with the same moments of inertia and classified according to the Zingg scheme. Also, the pair distribution functions describing the three-dimensional distributions were obtained from the coordinates of the precipitate mass centres. Based on this new data it is suggested that the existence of the heterogeneous microstructure could be due to a very small concentration gradient in the grains of the homogenized material and that the resulting multistage martensitic transformation originates in strain effects related to the size of the precipitates and scale differences of the available B2 matrix in between the precipitates.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Oxford	Editor
	Language		Wos	000287265100045	Publication Date	2010-12-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-6454;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	5.301	Times cited	34	Open Access
	Notes	Fwo			Approved	Most recent IF: 5.301; 2011 IF: 3.755
	Call Number	UA @ lucian @ c:irua:85533			Serial	2766
Permanent link to this record



	Author	Shestakov, M.V.; Tikhomirov, V.K.; Kirilenko, D.; Kuznetsov, A.S.; Chibotaru, L.F.; Baranov, A.N.; Van Tendeloo, G.; Moshchalkov, V.V.
	Title	Quantum cutting in Li (770 nm) and Yb (1000 nm) co-dopant emission bands by energy transfer from the ZnO nano-crystalline host			Type	A1 Journal article
	Year	2011	Publication	Optics express	Abbreviated Journal	Opt Express
	Volume	19	Issue	17	Pages	15955-15964
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Li-Yb co-doped nano-crystalline ZnO has been synthesized by a method of thermal growth from the salt mixtures. X-ray diffraction, transmission electron microscopy, atomic absorption spectroscopy and optical spectroscopy confirm the doping and indicate that the dopants may form Li-Li and Yb3+-Li based nanoclusters. When pumped into the conduction and exciton absorption bands of ZnO between 250 to 425 nm, broad emission bands of about 100 nm half-height-width are excited around 770 and 1000 nm, due to Li and Yb dopants, respectively. These emission bands are activated by energy transfer from the ZnO host mostly by quantum cutting processes, which generate pairs of quanta in Li (770 nm) and Yb (1000 nm) emission bands, respectively, out of one quantum absorbed by the ZnO host. These quantum cutting phenomena have great potential for application in the down-conversion layers coupled to the Si solar cells.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000293894900033	Publication Date	2011-08-04
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1094-4087;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.307	Times cited	19	Open Access
	Notes	FWO; Methusalem			Approved	Most recent IF: 3.307; 2011 IF: 3.587
	Call Number	UA @ lucian @ c:irua:92428			Serial	2776
Permanent link to this record



	Author	Neira, I.S.; Kolen'ko, Y.V.; Lebedev, O.I.; Van Tendeloo, G.; Gupta, H.S.; Matsushita, N.; Yoshimura, M.; Guitian, F.
	Title	Rational synthesis of a nanocrystalline calcium phosphate cement exhibiting rapid conversion to hydroxyapatite			Type	A1 Journal article
	Year	2009	Publication	Materials science and engineering: part C: biomimetic materials	Abbreviated Journal	Mat Sci Eng C-Mater
	Volume	29	Issue	7	Pages	2124-2132
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The rational synthesis, comprehensive characterization, and mechanical and micromechanical properties of a calcium phosphate cement are presented. Hydroxyapatite cement biomaterial was synthesized from reactive sub-micrometer-sized dicalcium phosphate dihydrate and tetracalcium phosphate via a dissolution-precipitation reaction using water as the liquid phase. As a result nanostructured, Ca-deficient and carbonated B-type hydroxyapatite is formed. The cement shows good processibility, sets in 22 ± 2 min and entirely transforms to the end product after 6 h of setting reaction, one of the highest conversion rates among previously reported for calcium phosphate cements based on dicalcium and tetracalcium phosphates. The combination of all elucidated physical-chemical traits leads to an essential bioactivity and biocompatibility of the cement, as revealed by in vitro acellular simulated body fluid and cell culture studies. The compressive strength of the produced cement biomaterial was established to be 25 ± 3 MPa. Furthermore, nanoindentation tests were performed directly on the cement to probe its local elasticity and plasticity at sub-micrometer/micrometer level. The measured elastic modulus and hardness were established to be Es = 23 ± 3.5 and H = 0.7 ± 0.2 GPa, respectively. These values are in close agreement with those reported in literature for trabecular and cortical bones, reflecting good elastic and plastic coherence between synthesized cement biomaterial and human bones.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lausanne	Editor
	Language		Wos	000270159200008	Publication Date	2009-04-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0928-4931;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.164	Times cited	18	Open Access
	Notes	Esteem 026019			Approved	Most recent IF: 4.164; 2009 IF: NA
	Call Number	UA @ lucian @ c:irua:79312			Serial	2812
Permanent link to this record



	Author	Rodewald, M.; Rodewald, K.; De Meulenaere, P.; Van Tendeloo, G.
	Title	Real-space characterization of short-range order in Cu-Pd alloys			Type	A1 Journal article
	Year	1997	Publication	Physical review : B : condensed matter and materials physics	Abbreviated Journal	Phys Rev B
	Volume	55	Issue	21	Pages	14173-14181
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Cu-Pd alloys containing 10, 20, 30, 40, and 50 at. % Pd and quenched from a temperature just above the ordering temperature T-c are investigated by electron diffraction and high-resolution electron microscopy (HREM). The results show diffuse electron diffraction intensities at {100} and {110} positions for the alloy with 10 at. % Pd, but with a characteristic twofold and fourfold splitting for the alloys with more than 10 at. % Pd. High-resolution images show the formation of microdomains best developed between 20 and 30 at. % Pd. A real-space characterization has been performed by applying videographic real-structure simulations revealing that the splitting of the diffuse maxima depends on the average distance between microdomains of Cu3Au type in antiphase with each other. By applying image processing routines on the HREM images, correlation vectors are identified which correspond to correlations between microdomains.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Lancaster, Pa	Editor
	Language		Wos	A1997XE37100036	Publication Date	2002-07-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0163-1829;1095-3795;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.836	Times cited	15	Open Access
	Notes				Approved	Most recent IF: 3.836; 1997 IF: NA
	Call Number	UA @ lucian @ c:irua:21439			Serial	2828
Permanent link to this record



	Author	Schattschneider, P.; Ennen, I.; Stoger-Pollach, M.; Verbeeck, J.; Mauchamp, V.; Jaouen, M.
	Title	Real space maps of magnetic moments on the atomic scale: theory and feasibility			Type	A1 Journal article
	Year	2010	Publication	Ultramicroscopy	Abbreviated Journal	Ultramicroscopy
	Volume	110	Issue	8	Pages	1038-1041
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The recently discovered EMCD technique (energy loss magnetic chiral dichroism) can detect atom specific magnetic moments with nanometer resolution, exploiting the spin selectivity of electronic transitions in energy loss spectroscopy. Yet, direct imaging of magnetic moments on the atomic scale is not possible. In this paper we present an extension of EMCD that can overcome this limit. As a model system we chose bcc Fe. We present image simulations of the L3 white line signal, based on the kinetic equation for the density matrix of the 200 kV probe electron. With actual progress in instrumentation (high brightness sources, aberration corrected lenses) this technique should allow direct imaging of spin moments on the atomic scale.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000281216600016	Publication Date	2009-12-07
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0304-3991;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.843	Times cited	10	Open Access
	Notes	---			Approved	Most recent IF: 2.843; 2010 IF: 2.063
	Call Number	UA @ lucian @ c:irua:84439UA @ admin @ c:irua:84439			Serial	2830
Permanent link to this record



	Author	Schattschneider, P.; Verbeeck, J.; Mauchamp, V.; Jaouen, M.; Hamon, A.-L.
	Title	Real-space simulations of spin-polarized electronic transitions in iron			Type	A1 Journal article
	Year	2010	Publication	Physical review : B : condensed matter and materials physics	Abbreviated Journal	Phys Rev B
	Volume	82	Issue	14	Pages	144418-144418,11
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	After the advent of energy-loss magnetic chiral dichroism (EMCD) in 2006, rapid progress in theoretical understanding and in experimental performance was achieved, recently demonstrating a spatial resolution of better than 2 nm. Similar to the x-ray magnetic circular dichroism technique, EMCD is used to study atom specific magnetic moments. The latest generation of electron microscopes opens the road to the mapping of spin moments on the atomic scale with this method. Here the theoretical background to reach this challenging aim is elaborated. Numerical simulations of the L3 transition in an Fe specimen, based on a combination of the density-matrix approach for inelastic electron scattering with the propagation of the probe electron in the lattice potential indicate the feasibility of single spin mapping in the electron microscope.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000282678900006	Publication Date	2010-10-08
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1098-0121;1550-235X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.836	Times cited	11	Open Access
	Notes	P.S. acknowledges the support of the Austrian Science Fund, Project No. I543-N20.			Approved	Most recent IF: 3.836; 2010 IF: 3.774
	Call Number	UA @ lucian @ c:irua:85029UA @ admin @ c:irua:85029			Serial	2832
Permanent link to this record



	Author	Müller, K.; Schowalter, M.; Rosenauer, A.; Jansen, J.; Tsuda, K.; Titantah, J.T.; Lamoen, D.
	Title	Refinement of chemically sensitive structure factors using parallel and convergent beam electron nanodiffraction			Type	A1 Journal article
	Year	2010	Publication	Journal of physics : conference series	Abbreviated Journal
	Volume	209	Issue	1	Pages	012025-012025,4
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	We introduce a new method to measure structure factors from parallel beam electron diffraction (PBED) patterns. Bloch wave refinement routines were developed which can minimise the difference between simulated and experimental Bragg intensities via variation of structure factors, Debye parameters, specimen thickness and -orientation. Due to plane wave illumination, the PBED refinement is highly efficient not only in computational respect, but also concerning the experimental effort since energy filtering is shown to have no significant effect on the refinement results. The PBED method was applied to simulated GaAs diffraction patterns to derive systematic errors and rules for the identification of plausible refinement results. The evaluation of experimental GaAs PBED patterns yields a 200 X-ray structure factor of -6.33±0.14. Additionally, we obtained -6.35±0.13 from two-dimensional convergent beam electron diffraction refinements. Both results confirm density functional theory calculations published by Rosenauer et al. and indicate the inaccuracy of isolated atom scattering data, which is crucial e.g. for the composition evaluation by lattice fringe analysis.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Bristol	Editor
	Language		Wos		Publication Date	2010-02-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1742-6596;	ISBN		Additional Links	UA library record
	Impact Factor		Times cited		Open Access
	Notes				Approved	Most recent IF: NA
	Call Number	UA @ lucian @ c:irua:85761			Serial	2855
Permanent link to this record



	Author	Müller, K.; Schowalter, M.; Jansen, J.; Tsuda, K.; Titantah, J.; Lamoen, D.; Rosenauer, A.
	Title	Refinement of the 200 structure factor for GaAs using parallel and convergent beam electron nanodiffraction data			Type	A1 Journal article
	Year	2009	Publication	Ultramicroscopy	Abbreviated Journal	Ultramicroscopy
	Volume	109	Issue	7	Pages	802-814
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	We present a new method to measure structure factors from electron spot diffraction patterns recorded under almost parallel illumination in transmission electron microscopes. Bloch wave refinement routines have been developed to refine the crystal thickness, its orientation and structure factors by comparison of experimentally recorded and calculated intensities. Our method requires a modicum of computational effort, making it suitable for contemporary personal computers. Frozen lattice and Bloch wave simulations of GaAs diffraction patterns are used to derive optimised experimental conditions. Systematic errors are estimated from the application of the method to simulated diffraction patterns and rules for the recognition of physically reasonable initial refinement conditions are derived. The method is applied to the measurement of the 200 structure factor for GaAs. We found that the influence of inelastically scattered electrons is negligible. Additionally, we measured the 200 structure factor from zero loss filtered two-dimensional convergent beam electron diffraction patterns. The precision of both methods is found to be comparable and the results agree well with each other. A deviation of more than 20% from isolated atom scattering data is observed, whereas close agreement is found with structure factors obtained from density functional theory [A. Rosenauer, M. Schowalter, F. Glas, D. Lamoen, Phys. Rev. B 72 (2005), 085326-1], which account for the redistribution of electrons due to chemical bonding via modified atomic scattering amplitudes.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000266787900005	Publication Date	2009-03-23
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0304-3991;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.843	Times cited	8	Open Access
	Notes	Fwo; G.0425.05; Esteem; Ant 200611271505			Approved	Most recent IF: 2.843; 2009 IF: 2.067
	Call Number	UA @ lucian @ c:irua:77361			Serial	2856
Permanent link to this record



	Author	van Daele, B.; Van Tendeloo, G.; Germain, M.; Leys, M.; Bougrioua, Z.; Moerman, I.
	Title	Relation between microstructure and 2DEG properties of AlGaN/GaN structures			Type	A1 Journal article
	Year	2002	Publication	Physica status solidi: B: basic research	Abbreviated Journal	Phys Status Solidi B
	Volume	234	Issue	3	Pages	830-834
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Berlin	Editor
	Language		Wos	000180038200031	Publication Date	2002-12-03
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0370-1972;1521-3951;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.674	Times cited	1	Open Access
	Notes				Approved	Most recent IF: 1.674; 2002 IF: 0.930
	Call Number	UA @ lucian @ c:irua:54847			Serial	2857
Permanent link to this record



	Author	Schuddinck, W.; Van Tendeloo, G.; Barnabé, A.; Hervieu, M.; Raveau, B.
	Title	Relation between structure, charge ordering and magnetotransport properties in Nd_0.5Ca_0.5Mn_1-xCr_xO₃ manganites			Type	A1 Journal article
	Year	2000	Publication	Journal of magnetism and magnetic materials T2 – Symposium G Material Physics Issues and Applications of Magnetic Oxides, at the E-MRS Spring Meeting, JUN 01-04, 1999, Strasbourg, France	Abbreviated Journal	J Magn Magn Mater
	Volume	211	Issue	1-3	Pages	105-110
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The relationships between incommensurability, charge ordering and magnetotransport properties in Nd0.5Ca0.5Mn1-xCrxO3 manganites have been studied by electron diffraction and lattice imaging versus temperature with 0.02 less than or equal to x less than or equal to 0.07. All compositions show an incommensurate superstructure over the whole temperature domain, despite the fact that they are ferromagnetic and conductive below 140 K, The q-vector (1/2 – delta)a* decreases with increasing temperature for all compositions x. For a given temperature q also decreases with x. Lattice images obtained at low temperature give a clear view of the characteristics of the incommensurate structure. They also provide a better understanding of the charge ordering process. The low-temperature form of the Cr-doped manganites is not a perfectly doubled cell [[2a(p)root 2 x 2a(p) x a(p)root 2]], but defects inducing a tripled cell occur pseudo-periodically. (C) 2000 Elsevier Science B.V. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000085772100017	Publication Date	2002-07-25
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0304-8853;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.63	Times cited	16	Open Access
	Notes				Approved	Most recent IF: 2.63; 2000 IF: 0.996
	Call Number	UA @ lucian @ c:irua:104256			Serial	2858
Permanent link to this record



	Author	Dominiczak, M.; Ruyter, A.; Limelette, P.; Monot-Laffez, I.; Giovannelli, F.; Rossell, M.D.; Van Tendeloo, G.
	Title	Relaxation phenomena at the metal-to-insulator transition in La_0.8Sr_0.2MnO₃ single crystals			Type	A1 Journal article
	Year	2008	Publication	Solid state communications	Abbreviated Journal	Solid State Commun
	Volume	148	Issue	7/8	Pages	340-344
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The time dependence of the resistance RAC of a La0.8Sr0.2MnO3 single crystal has been investigated in the vicinity of the metal-to-insulator transition temperature. We used local probe microscopy to show the existence, at room temperature, of coexisting clusters of micrometer size. Our analysis shows that relaxation effects can be described with a simple exponential contribution using a random resistor-network, based on phase separation between insulating and metallic domains. Our results clearly prove the existence of a percolation threshold over which no percolation path exists. Moreover, these results highlight the significant role of the remanent magnetization.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York, N.Y.	Editor
	Language		Wos	000260907800020	Publication Date	2008-09-03
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0038-1098;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.554	Times cited	9	Open Access
	Notes				Approved	Most recent IF: 1.554; 2008 IF: 1.557
	Call Number	UA @ lucian @ c:irua:75637			Serial	2863
Permanent link to this record



	Author	Lisiecki, I.; Turner, S.; Bals, S.; Pileni, M.P.; Van Tendeloo, G.
	Title	The remarkable and intriguing resistance to oxidation of 2D ordered hcp Co nanocrystals: a new intrinsic property			Type	A1 Journal article
	Year	2009	Publication	Chemistry of materials	Abbreviated Journal	Chem Mater
	Volume	21	Issue	12	Pages	2335-2338
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000267049200001	Publication Date	2009-05-14
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0897-4756;1520-5002;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	9.466	Times cited	28	Open Access
	Notes	Iap-Vi; Esteem 026019			Approved	Most recent IF: 9.466; 2009 IF: 5.368
	Call Number	UA @ lucian @ c:irua:77887			Serial	2867
Permanent link to this record



	Author	Kalkert, C.; Krisponeit, J.-O.; Esseling, M.; Lebedev, O.I.; Moshnyaga, V.; Damaschke, B.; Van Tendeloo, G.; Samwer, K.
	Title	Resistive switching at manganite/manganite interfaces			Type	A1 Journal article
	Year	2011	Publication	Applied physics letters	Abbreviated Journal	Appl Phys Lett
	Volume	99	Issue	13	Pages	132512-132512,3
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	We report bipolar resistive switching between the interfaces of manganite nanocolumns. La0.7Sr0.3MnO3 films were prepared on Al2O3 substrates, where the films grow in nanocolumns from the substrate to the surface. Conductive atomic force microscopy directly detects that the resistive switching is located at the boundaries of the grains. Furthermore, mesoscopic transport measurements reveal a tunnel magnetoresistance. In combination with the resistive switching, this leads to a total of four different resistive states.
	Address
	Corporate Author				Thesis
	Publisher	American Institute of Physics	Place of Publication	New York, N.Y.	Editor
	Language		Wos	000295618000052	Publication Date	2011-09-29
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0003-6951;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.411	Times cited	10	Open Access
	Notes				Approved	Most recent IF: 3.411; 2011 IF: 3.844
	Call Number	UA @ lucian @ c:irua:91884			Serial	2881
Permanent link to this record



	Author	McCalla, E.; Prakash, A.S.; Berg, E.; Saubanere, M.; Abakumov, A.M.; Foix, D.; Klobes, B.; Sougrati, M.T.; Rousse, G.; Lepoivre, F.; Mariyappan, S.; Doublet, M.L.; Gonbeau, D.; Novak, P.; Van Tendeloo, G.; Hermann, R.P.; Tarascon, J.M.;
	Title	Reversible Li-intercalation through oxygen reactivity in Li-rich Li-Fe-Te oxide materials			Type	A1 Journal article
	Year	2015	Publication	Journal of the electrochemical society	Abbreviated Journal	J Electrochem Soc
	Volume	162	Issue	162	Pages	A1341-A1351
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Lithium-rich oxides are a promising class of positive electrode materials for next generation lithium-ion batteries, and oxygen plays a prominent role during electrochemical cycling either by forming peroxo-like species and/or by irreversibly forming oxygen gas during first charge. Here, we present Li-Fe-Te-O materials which show a tremendous amount of oxygen gas release. This oxygen release accounts for nearly all the capacity during the first charge and results in vacancies as seen by transmission electron microscopy. There is no oxidation of either metal during charge but significant changes in their environments. These changes are particularly extreme for tellurium. XRD and neutron powder diffraction both show limited Changes during cycling and no appreciable change in lattice parameters. A density functional theory study of this material is performed and demonstrates that the holes created on some of the oxygen atoms upon oxidation are partially stabilized through the formation of shorter O-O bonds, i.e. (O-2)(n-) species which on further delithiation show a spontaneous O-2 de-coordination from the cationic network and migration to the now empty lithium layer. The rate limiting step during charge is undoubtedly the diffusion of oxygen either out along the lithium layer or via columns of oxygen atoms. (C) 2015 The Electrochemical Society. All rights reserved.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	New York, N.Y.	Editor
	Language		Wos	000355643700030	Publication Date	2015-04-29
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0013-4651;1945-7111;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.259	Times cited	23	Open Access
	Notes				Approved	Most recent IF: 3.259; 2015 IF: 3.266
	Call Number	c:irua:126445			Serial	2903
Permanent link to this record



	Author	van Daele, B.; Van Tendeloo, G.; Ruythooren, W.; Derluyn, J.; Leys, M.; Germain, M.
	Title	The role of Al on Ohmic contact formation on n-type GaN and AlGaN/GaN			Type	A1 Journal article
	Year	2005	Publication	Applied physics letters	Abbreviated Journal	Appl Phys Lett
	Volume	87	Issue	6	Pages	061905,1-3
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher	American Institute of Physics	Place of Publication	New York, N.Y.	Editor
	Language		Wos	000231016900019	Publication Date	2005-08-02
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0003-6951;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.411	Times cited	57	Open Access
	Notes				Approved	Most recent IF: 3.411; 2005 IF: 4.127
	Call Number	UA @ lucian @ c:irua:54808			Serial	2910
Permanent link to this record



	Author	Fang, C.M.; van Huis, M.A.; Jansen, J.; Zandbergen, H.W.
	Title	Role of carbon and nitrogen in Fe₂C and Fe₂N from first-principles calculations			Type	A1 Journal article
	Year	2011	Publication	Physical review : B : condensed matter and materials physics	Abbreviated Journal	Phys Rev B
	Volume	84	Issue	9	Pages	094102-094102,10
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Although Fe2C and Fe2N are technologically important materials, the exact nature of the chemical bonding of C and N atoms and the related impact on the electronic properties are at present unclear. Here, results of first-principles electronic structure calculations for Fe2X (X = C, N) phases are presented. The electronic structure calculations show that the roles of N and C in iron nitrides and carbides are comparable, and that the X-X interactions have significant impact on electronic properties. Accurate analysis of the spatially resolved differences in electron densities reveals a subtle distinction between the chemical bonding and charge transfer of N and C ions.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000294772800003	Publication Date	2011-09-09
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1098-0121;1550-235X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	3.836	Times cited	24	Open Access
	Notes				Approved	Most recent IF: 3.836; 2011 IF: 3.691
	Call Number	UA @ lucian @ c:irua:92327			Serial	2912
Permanent link to this record



	Author	Salluzzo, M.; Aruta, C.; Ausanio, G.; Bals, S.; d' Agostino, A.; Maglione, M.G.
	Title	Role of Nd/Ba substitution on the growth mode and on the structural properties of Nd-rich Re₁(Nd_xBa_2-x)Cu₃O_7-\delta (Re=Nd, Y) thin films			Type	A1 Journal article
	Year	2002	Publication	Physica: C : superconductivity	Abbreviated Journal	Physica C
	Volume	372-376	Issue	2	Pages	675-678
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Thin films of the superconducting Nd1+xBa2−xCu3O7−δ (NBCO) and Y1(NdxBa2−x)Cu3O7−δ (YNBCO) compounds have been deposited by dc magnetron sputtering and diode high pressure oxygen sputtering. Different techniques, including scanning tunneling microscopy, atomic force microscopy, X-ray diffraction and transmission electron microscopy (TEM) have been used to study the film microstructures and the surface morphology. It is shown that the Nd/Ba exchange promotes a 2D heteroepitaxial growth in the case of the NBCO films deposited on (1 0 0) SrTiO3 substrates, with a suppression of the characteristic 3D spirals structures. On the contrary in YNBCO the Nd/Ba exchange does not provide a driving force for the suppression of screw-dislocations, since spirals or towers originated by screw and half loop dislocations are observed on the surface. TEM reveals that anti-phase boundaries are eliminated during the growth of NBCO films thanks to the Nd/Ba exchange while this mechanism is not operating in the case of YNBCO films.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	000178018800024	Publication Date	2002-08-26
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0921-4534;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	1.404	Times cited	5	Open Access
	Notes				Approved	Most recent IF: 1.404; 2002 IF: 0.912
	Call Number	UA @ lucian @ c:irua:87909			Serial	2917
Permanent link to this record



	Author	Zhang, X.F.; Van Tendeloo, G.; Hu, D.W.; Brabers, V.A.M.
	Title	Room temperature (2a x 2b) superstructure formed in Sr-submitted Bi₂(Sr_1.6Y_0.4)CaCu₂O_y single crystals			Type	A1 Journal article
	Year	1997	Publication	Physica: C : superconductivity	Abbreviated Journal	Physica C
	Volume	278	Issue		Pages	31-38
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Amsterdam	Editor
	Language		Wos	A1997XB79300004	Publication Date	0000-00-00
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0921-4534	ISBN		Additional Links	UA library record; WoS full record;
	Impact Factor	1.404	Times cited		Open Access
	Notes				Approved	Most recent IF: 1.404; 1997 IF: 2.199
	Call Number	UA @ lucian @ c:irua:21436			Serial	2928
Permanent link to this record



	Author	Richard, O.; Schuddinck, W.; Van Tendeloo, G.; Millange, F.; Hervieu, M.; Caignaert, C.; Raveau, B.
	Title	*Room temperature and low-temperature structure of Nd_1-xCa_xMnO₃ (0.3x0.5)*			Type	A1 Journal article
	Year	1999	Publication	Acta crystallographica: section A: foundations of crystallography	Abbreviated Journal	Acta Crystallogr A
	Volume	55	Issue		Pages	704-718
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Copenhagen	Editor
	Language		Wos	000081697500013	Publication Date	2002-07-27
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0108-7673;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	5.725	Times cited	24	Open Access
	Notes				Approved	Most recent IF: 5.725; 1999 IF: 1.601
	Call Number	UA @ lucian @ c:irua:29715			Serial	2929
Permanent link to this record



	Author	Vanhellemont, J.; Maes, H.E.; Schaekers, M.; Armigliato, A.; Cerva, H.; Cullis, A.; de Sande, J.; Dinges, H.; Hallais, J.; Nayar, V.; Pickering, C.; Stehlé, J.L.; Van Landuyt, J.; Walker, C.; Werner, H.; Salieri, P.;
	Title	Round-robin investigation of silicon-oxide on silicon reference materials for ellipsometry			Type	A1 Journal article
	Year	1993	Publication	Applied surface science T2 – SYMP ON DIAGNOSTIC TECHNIQUES FOR SEMICONDUCTOR MATERIALS ANALYSIS AND, FABRICATION PROCESS CONTROL, AT THE 1992 SPRING CONF OF THE EUROPEAN, MATERIALS RESEARCH SOC, JUN 02-05, 1992, STRASBOURG, FRANCE	Abbreviated Journal	Appl Surf Sci
	Volume	63	Issue	1-4	Pages	45-51
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The main results and conclusions are presented of a round robin study of silicon oxide on silicon reference samples for ellipsometry. The oxide films with nominal thicknesses of 10, 50 and 120 nm are grown by thermal oxidation. The oxide film thicknesses have been determined by single wavelength ellipsometry (SWE), by spectroscopic ellipsometry (SE) and by cross-sectional conventional and high-resolution transmission electron microscopy (TEM and HREM) in different laboratories. The main conclusions are that special precautions have to be taken in order to use TEM as a reliable thickness measurement technique; that single wavelength ellipsometry can be used with great accuracy and reproducibility for the 50 and 120 nm film thicknesses but that it shows some inherent problems for the 10 nm films; and that spectroscopic ellipsometry showed for all film thicknesses an accuracy and reproducibility which is clearly superior to that of SWE.
	Address
	Corporate Author				Thesis
	Publisher	Elsevier science bv	Place of Publication	Amsterdam	Editor
	Language		Wos	A1993KF03400009	Publication Date	2002-10-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0169-4332;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	2.711	Times cited	13	Open Access
	Notes				Approved
	Call Number	UA @ lucian @ c:irua:104539			Serial	2932
Permanent link to this record



	Author	Schröder, F.; Esken, D.; Cokoja, M.; van den Berg, M.W.E.; Lebedev, O.I.; Van Tendeloo, G.; Walaszek, B.; Buntkowsky, G.; Limbach, H.H.; Chaudret, B.; Fischer, R.A.;
	Title	Ruthenium nanoparticles inside porous (Zn40(bdC)(3)) by hydrogenolysis of adsorbed (Ru(cod)(cot)): a solid-state reference system for surfactant-stabilized ruthenium colloids			Type	A1 Journal article
	Year	2008	Publication	Journal of the American Chemical Society	Abbreviated Journal	J Am Chem Soc
	Volume	130	Issue	19	Pages	6119-6130
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000255620200018	Publication Date	2008-04-11
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0002-7863;1520-5126;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	13.858	Times cited	272	Open Access
	Notes	Esteem 026019			Approved	Most recent IF: 13.858; 2008 IF: 8.091
	Call Number	UA @ lucian @ c:irua:68851			Serial	2934
Permanent link to this record



	Author	Barreca, D.; Carraro, G.; Gasparotto, A.; Maccato, C.; Warwick, M.E.A.; Kaunisto, K.; Sada, C.; Turner, S.; Gönüllü, Y.; Ruoko, T.-P.; Borgese, L.; Bontempi, E.; Van Tendeloo, G.; Lemmetyinen, H.; Mathur, S.
	Title	Fe₂O₃-TiO₂Nano-heterostructure Photoanodes for Highly Efficient Solar Water Oxidation			Type	A1 Journal article
	Year	2015	Publication	Advanced Materials Interfaces	Abbreviated Journal	Adv Mater Interfaces
	Volume	2	Issue	2	Pages	1500313
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Harnessing solar energy for the production of clean hydrogen by photoelectrochemical water splitting represents a very attractive, but challenging approach for sustainable energy generation. In this regard, the fabrication of Fe2O3–TiO2 photoanodes is reported, showing attractive performances [≈2.0 mA cm−2 at 1.23 V vs. the reversible hydrogen electrode in 1 M NaOH] under simulated one-sun illumination. This goal, corresponding to a tenfold photoactivity enhancement with respect to bare Fe2O3, is achieved by atomic layer deposition of TiO2 over hematite (α-Fe2O3) nanostructures fabricated by plasma enhanced-chemical vapor deposition and final annealing at 650 °C. The adopted approach enables an intimate Fe2O3–TiO2 coupling, resulting in an electronic interplay at the Fe2O3/TiO2 interface. The reasons for the photocurrent enhancement determined by TiO2 overlayers with increasing thickness are unraveled by a detailed chemico-physical investigation, as well as by the study of photogenerated charge carrier dynamics. Transient absorption spectroscopy shows that the increased photoelectrochemical response of heterostructured photoanodes compared to bare hematite is due to an enhanced separation of photogenerated charge carriers and more favorable hole dynamics for water oxidation. The stable responses obtained even in simulated seawater provides a feasible route in view of the eventual large-scale generation of renewable energy.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000368914700011	Publication Date	2015-09-03
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2196-7350;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	4.279	Times cited	56	Open Access
	Notes	The authors kindly acknowledge the fi nancial support under the FP7 project “SOLAROGENIX” (NMP4-SL-2012-310333), as well as Padova University ex-60% 2012–2014 projects, Grant No. CPDR132937/13 (SOLLEONE), and Regione Lombardia-INSTM ATLANTE projects. S.T. acknowledges the FWO Flanders for a postdoctoral scholarship.			Approved	Most recent IF: 4.279; 2015 IF: NA
	Call Number	c:irua:129201			Serial	3957
Permanent link to this record



	Author	Angelomé, P.C.; Heidari Mezerji, H.; Goris, B.; Pastoriza-Santos, I.; Pérez-Juste, J.; Bals, S.; Liz-Marzán, L.M.
	Title	Seedless synthesis of single crystalline Au nanoparticles with unusual shapes and tunable LSPR in the near-IR			Type	A1 Journal article
	Year	2012	Publication	Chemistry of materials	Abbreviated Journal	Chem Mater
	Volume	24	Issue	7	Pages	1393-1399
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	The plasmonic properties of metal nanoparticles have acquired great importance because of their potential applications in very diverse fields. Metal nanoparticles with localized surface plasmon resonances (LSPR) in the near-infrared (NIR, 7501300 nm) are of particular interest because tissues, blood, and water display low absorption in this spectral range, thus facilitating biomedical applications. Cetyltrimethylammonium chloride (CTAC) was used to induce the seedless formation of highly anisotropic, twisted single crystalline Au nanoparticles in a single step. The LSPR of the obtained particles can be tuned from 600 nm up to 1400 nm by simply changing the reaction temperature or the reagents concentrations. The tunability of the LSPR is closely associated with significant changes in the final particle morphology, which was studied by advanced electron microscopy techniques (3D Tomography and HAADF-STEM). Kinetic experiments were carried out to establish the growth mechanism, suggesting that slow kinetics together with the complexation of the gold salt precursor to CTAC are key factors favoring the formation of these anisotropic particles.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Washington, D.C.	Editor
	Language		Wos	000302487500020	Publication Date	2012-03-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0897-4756;1520-5002;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	9.466	Times cited	42	Open Access
	Notes	Fwo			Approved	Most recent IF: 9.466; 2012 IF: 8.238
	Call Number	UA @ lucian @ c:irua:97388			Serial	2959
Permanent link to this record



	Author	Van de Vyver, S.; Geboers, J.; Dusselier, M.; Schepers, H.; Vosch, T.; Zhang, L.; Van Tendeloo, G.; Jacobs, P.A.; Sels, B.F.
	Title	Selective bifunctional catalytic conversion of cellulose over reshaped ni particles at the tip of carbon nanofibers			Type	A1 Journal article
	Year	2010	Publication	Chemsuschem	Abbreviated Journal	Chemsuschem
	Volume	3	Issue	6	Pages	698-701
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Weinheim	Editor
	Language		Wos	000279753300011	Publication Date	2010-05-05
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1864-5631;1864-564X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	7.226	Times cited	136	Open Access
	Notes				Approved	Most recent IF: 7.226; 2010 IF: 6.325
	Call Number	UA @ lucian @ c:irua:95657			Serial	2962
Permanent link to this record



	Author	Struzzi, C.; Erbahar, D.; Scardamaglia, M.; Amati, M.; Gregoratti, L.; Lagos; Van Tendeloo, G.; Snyders, R.; Ewels, C.; Bittencourt, C.
	Title	Selective decoration of isolated carbon nanotubes by potassium evaporation : scanning photoemission microscopy and density functional theory			Type	A1 Journal article
	Year	2015	Publication	Journal of materials chemistry C : materials for optical and electronic devices	Abbreviated Journal	J Mater Chem C
	Volume	3	Issue	3	Pages	2518-2527
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Site selective doping of aligned carbon nanostructures represents a promising approach for their implementation in actual devices. In the present work we report on alkali metals decoration on low density vertically aligned carbon nanotubes, disclosing the possibility of engineering site selective depositions of potassium atoms on the carbon systems. Photoemission measurements were combined with microscopy demonstrating the effective spatial control of alkali deposition. The changes of electronic structures of locally doped carbon regions were studied by exploiting the ability of the scanning photoemission microscopy technique. From the analysis of experimental data supported by theoretical calculations, we show the tuning of the charge transfer from potassium to carbon atoms belonging to neighboring nanotubes or along the same tube structure.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication		Editor
	Language		Wos	000350984200011	Publication Date	2014-12-30
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	2050-7526;2050-7534;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	5.256	Times cited	6	Open Access
	Notes				Approved	Most recent IF: 5.256; 2015 IF: 4.696
	Call Number	c:irua:125496			Serial	2963
Permanent link to this record



	Author	Schutyser, W.; Van den Bosch, S.; Dijkmans, J.; Turner, S.; Meledina, M.; Van Tendeloo, G.; Debecker, D.P.; Sels, B.F.
	Title	Selective nickel-catalyzed conversion of model and lignin-derived phenolic compounds to cyclohexanone-based polymer building blocks			Type	A1 Journal article
	Year	2015	Publication	Chemsuschem	Abbreviated Journal	Chemsuschem
	Volume	8	Issue	8	Pages	1805-1818
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Valorization of lignin is essential for the economics of future lignocellulosic biorefineries. Lignin is converted into novel polymer building blocks through four steps: catalytic hydroprocessing of softwood to form 4-alkylguaiacols, their conversion into 4-alkylcyclohexanols, followed by dehydrogenation to form cyclohexanones, and Baeyer-Villiger oxidation to give caprolactones. The formation of alkylated cyclohexanols is one of the most difficult steps in the series. A liquid-phase process in the presence of nickel on CeO2 or ZrO2 catalysts is demonstrated herein to give the highest cyclohexanol yields. The catalytic reaction with 4-alkylguaiacols follows two parallel pathways with comparable rates: 1) ring hydrogenation with the formation of the corresponding alkylated 2-methoxycyclohexanol, and 2) demethoxylation to form 4-alkylphenol. Although subsequent phenol to cyclohexanol conversion is fast, the rate is limited for the removal of the methoxy group from 2-methoxycyclohexanol. Overall, this last reaction is the rate-limiting step and requires a sufficient temperature (> 250 degrees C) to overcome the energy barrier. Substrate reactivity (with respect to the type of alkyl chain) and details of the catalyst properties (nickel loading and nickel particle size) on the reaction rates are reported in detail for the Ni/CeO2 catalyst. The best Ni/CeO2 catalyst reaches 4-alkylcyclohexanol yields over 80 %, is even able to convert real softwood-derived guaiacol mixtures and can be reused in subsequent experiments. A proof of principle of the projected cascade conversion of lignocellulose feedstock entirely into caprolactone is demonstrated by using Cu/ZrO2 for the dehydrogenation step to produce the resultant cyclohexanones (approximate to 80%) and tin-containing beta zeolite to form 4-alkyl-e-caprolactones in high yields, according to a Baeyer-Villiger-type oxidation with H2O2.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Weinheim	Editor
	Language		Wos	000355220300020	Publication Date	2015-04-16
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1864-5631;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	7.226	Times cited	71	Open Access
	Notes	Fwo			Approved	Most recent IF: 7.226; 2015 IF: 7.657
	Call Number	c:irua:126406			Serial	2967
Permanent link to this record



	Author	Quintana, M.; Montellano, A.; Esau del Rio Castillo, A.; Van Tendeloo, G.; Bittencourt, C.; Prato, M.
	Title	Selective organic functionalization of graphene bulk or graphene edges			Type	A1 Journal article
	Year	2011	Publication	Chemical communications	Abbreviated Journal	Chem Commun
	Volume	47	Issue	33	Pages	9330-9332
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Graphene sheets have been functionalized with a PAMAM dendron, finding that graphene can be efficiently functionalized all over the surface, or only at the edges, depending on the reactions used in the functionalization process.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	London	Editor
	Language		Wos	000293648200010	Publication Date	2011-07-20
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	1359-7345;1364-548X;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	6.319	Times cited	84	Open Access
	Notes				Approved	Most recent IF: 6.319; 2011 IF: 6.169
	Call Number	UA @ lucian @ c:irua:91892			Serial	2968
Permanent link to this record



	Author	Kirsanova, M.A.; Reshetova, L.N.; Olenev, A.V.; Abakumov, A.M.; Shevelkov, A.V.
	Title	Semiclathrates of the GePTe system : synthesis and crystal structures			Type	A1 Journal article
	Year	2011	Publication	Chemistry: a European journal	Abbreviated Journal	Chem-Eur J
	Volume	17	Issue	20	Pages	5719-5726
	Keywords	A1 Journal article; Electron microscopy for materials research (EMAT)
	Abstract	Novel compounds [Ge46−xPx]Tey (13.9≤x≤15.6, 5.92≤y≤7.75) with clathrate-like structures have been prepared and structurally characterized. They crystallize in the space group Fmequation image with the unit cell parameter changing from 20.544(2) to 20.698(2) Å (Z=8) on going from x=13.9 to x=15.6. Their crystal structure is composed of a covalently bonded Ge[BOND]P framework that hosts tellurium atoms in the guest positions and can be viewed as a peculiar variant of the type I clathrate superstructure. In contrast to the conventional type I clathrates, [Ge46−xPx]Tey contain tricoordinated (3b) atoms and no vacancies in the framework positions. As a consequence of the transformation of the framework, the majority of the guest tellurium atoms form a single covalent bond with the host framework and thus the title compounds are the first representative of semiclathrates with covalent bonding. A comparison is made with silicon clathrates and the evolution of the crystal structure upon changing the tellurium content is discussed.
	Address
	Corporate Author				Thesis
	Publisher		Place of Publication	Weinheim	Editor
	Language		Wos	000290216000028	Publication Date	2011-04-05
	Series Editor		Series Title		Abbreviated Series Title
	Series Volume		Series Issue		Edition
	ISSN	0947-6539;	ISBN		Additional Links	UA library record; WoS full record; WoS citing articles
	Impact Factor	5.317	Times cited	17	Open Access
	Notes				Approved	Most recent IF: 5.317; 2011 IF: 5.925
	Call Number	UA @ lucian @ c:irua:89773			Serial	2981
Permanent link to this record

Select All Deselect All

List View

Citations

Details

All Found Records Selected Records:

Save Citations: Format:

Export Records: Format:

Home

CQL Search | Library Search | Show Record | Extract Citations

Help