| |
Records |
|
Author |
Cherigui, E.A.M.; Şentosun, K.; Mamme, M.H.; Lukaczynska, M.; Terryn, H.; Bals, S.; Ustarroz, J. |
| |
Title |
On the control and effect of water content during the electrodeposition of Ni nanostructures from deep eutectic solvents |
Type |
A1 Journal article |
| |
Year |
2018 |
Publication |
The journal of physical chemistry: C : nanomaterials and interfaces |
Abbreviated Journal |
J Phys Chem C |
| |
Volume |
122 |
Issue |
122 |
Pages |
23129-23142 |
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
| |
Abstract |
The electrodeposition of nickel nanostructures on glassy carbon was investigated in 1:2 choline chloride urea deep eutectic solvent (DES) containing different amounts of water. By combining electrochemical techniques, with ex situ field emission scanning electron microscopy, high-angle annular dark field scanning transmission electron microscopy, and energy-dispersive X-ray spectroscopy, the effect of water content on the electrochemical processes occurring during nickel deposition was better understood. At highly negative potentials and depending on water content, Ni growth is halted due to water splitting and formation of a mixed layer of Ni/NiOx(OH)(2(1-x)(ads)). Moreover, under certain conditions, the DES components can also be (electro)chemically reduced at the electrode surface, blocking further three-dimensional growth of the Ni NPs. Hence, a two-dimensional crystalline Ni-containing network can be formed in the interparticle region. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
Washington, D.C. |
Editor |
|
| |
Language |
|
Wos |
000447471700038 |
Publication Date |
2018-09-18 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
1932-7447; 1932-7455 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor  |
4.536 |
Times cited |
27 |
Open Access |
OpenAccess |
| |
Notes |
; E.A.M.C. and M.H.M. acknowledge funding from the Fonds Wetenschappelijk Onderzoek in Flanders (FWO, research project G019014N). S.B. acknowledges funding from the European Research Council (Starting Grant No. COLOURATOMS 335078). Finally, J.U. acknowledges funding from the Fonds Wetenschappelijk Onderzoek in Flanders (FWO, postdoctoral grant 12I7816N). ; ecas_sara |
Approved |
Most recent IF: 4.536 |
| |
Call Number |
UA @ lucian @ c:irua:154731 |
Serial |
5121 |
| Permanent link to this record |
| |
|
| |
|
Author |
van der Burgt, J.S.; Geuchies, J.J.; van der Meer, B.; Vanrompay, H.; Zanaga, D.; Zhang, Y.; Albrecht, W.; Petukhov, A.V.; Filion, L.; Bals, S.; Swart, I.; Vanmaekelbergh, D. |
| |
Title |
Cuboidal supraparticles self-assembled from cubic CsPbBr3 perovskite nanocrystals |
Type |
A1 Journal article |
| |
Year |
2018 |
Publication |
The journal of physical chemistry: C : nanomaterials and interfaces |
Abbreviated Journal |
J Phys Chem C |
| |
Volume |
122 |
Issue |
122 |
Pages |
15706-15712 |
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
| |
Abstract |
Colloidal CsPbBr3 nanocrystals (NCs) have emerged as promising candidates for various opto-electronic applications, such as light-emitting diodes, photodetectors, and solar cells. Here, we report on the self-assembly of cubic NCs from an organic suspension into ordered cuboidal supraparticles (SPs) and their structural and optical properties. Upon increasing the NC concentration or by addition of a nonsolvent, the formation of the SPs occurs homogeneously in the suspension, as monitored by in situ X-ray scattering measurements. The three-dimensional structure of the SPs was resolved through high-angle annular dark-field scanning transmission electron microscopy and electron tomography. The NCs are atomically aligned but not connected. We characterize NC vacancies on superlattice positions both in the bulk and on the surface of the SPs. The occurrence of localized atomic-type NC vacancies-instead of delocalized ones-indicates that NC-NC attractions are important in the assembly, as we verify with Monte Carlo simulations. Even when assembled in SPs, the NCs show bright emission, with a red shift of about 30 meV compared to NCs in suspension. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
Washington, D.C. |
Editor |
|
| |
Language |
|
Wos |
000439003600071 |
Publication Date |
2018-06-14 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
1932-7447; 1932-7455 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
4.536 |
Times cited |
60 |
Open Access |
OpenAccess |
| |
Notes |
; The authors thank Dr. Rajeev Dattani and Jacques Gorini from the ID02 beamline of the ESRF for their excellent assistance during the X-ray scattering experiments. We also thank Carlo van Overbeek, P. Tim Prins, and Federico Montanarella for their support during the synchrotron experiments. The authors gratefully acknowledge Prof. Dr. Alfons van Blaaderen for fruitful discussions. D.V. acknowledges funding from NWO-CW TOPPUNT “Superficial superstructures.” J.J.G. acknowledges the joint Debye and ESRF graduate programs for the financial support. H.V. gratefully acknowledges the financial support by the Flemish Fund for Scientific Research (FWO grant 1S32617NN). S.B. acknowledges the financial support from the European Research Council (ERC Starting grant # 335078-COLOURATOMS). Y.Z. acknowledges the financial support from the European Union's Horizon 2020 research and innovation program, under the Marie Sklodowska-Curie grant agreement #665501 through a FWO [PEGASUS]2 Marie Sklodowska-Curie fellowship (12U4917N). W.A. acknowledges the financial support from the European Research Council under the European Unions Seventh Framework Program (FP-2007-2013)/ERC Advanced grant agreement 291667 HierarSACol. ; ecas_Sara |
Approved |
Most recent IF: 4.536 |
| |
Call Number |
UA @ lucian @ c:irua:153161UA @ admin @ c:irua:153161 |
Serial |
5087 |
| Permanent link to this record |
| |
|
| |
|
Author |
Bal, K.M.; Neyts, E.C. |
| |
Title |
Overcoming Old Scaling Relations and Establishing New Correlations in Catalytic Surface Chemistry: Combined Effect of Charging and Doping |
Type |
A1 Journal article |
| |
Year |
2019 |
Publication |
The journal of physical chemistry: C : nanomaterials and interfaces |
Abbreviated Journal |
J Phys Chem C |
| |
Volume |
123 |
Issue |
10 |
Pages |
6141-6147 |
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
| |
Abstract |
Optimization of catalytic materials for a given application is greatly constrained by linear scaling relations. Recently, however, it has been demonstrated that it is possible to reversibly modulate the chemisorption of molecules on nanomaterials by charging (i.e., injection or removal of electrons) and hence reversibly and selectively modify catalytic activity beyond structure−activity correlations. The fundamental physical relation between the properties of the material, the charging process, and the chemisorption energy, however, remains unclear, and a systematic exploration and optimization of charge-switchable sorbent materials is not yet possible. Using hybrid DFT calculations of CO2 chemisorption on hexagonal boron nitride nanosheets with several types of defects and dopants, we here reveal the existence of fundamental correlations between the electron affinity of a material and charge-induced chemisorption, show how defect engineering can be used to modulate the strength and efficiency of the adsorption process, and demonstrate that excess electrons stabilize many topological defects. We then show how these insights could be exploited in the development of new electrocatalytic materials and the synthesis of doped nanomaterials. Moreover, we demonstrate that calculated chemical properties of charged materials are highly sensitive to the employed computational methodology because of the self-interaction error, which underlines the theoretical challenge posed by such systems. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000461537400035 |
Publication Date |
2019-03-14 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
1932-7447 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
4.536 |
Times cited |
5 |
Open Access |
Not_Open_Access: Available from 21.02.2020
|
| |
Notes |
Fonds Wetenschappelijk Onderzoek, 11V8915N ; |
Approved |
Most recent IF: 4.536 |
| |
Call Number |
PLASMANT @ plasmant @UA @ admin @ c:irua:158117 |
Serial |
5160 |
| Permanent link to this record |
| |
|
| |
|
Author |
Heijkers, S.; Martini, L.M.; Dilecce, G.; Tosi, P.; Bogaerts, A. |
| |
Title |
Nanosecond Pulsed Discharge for CO2Conversion: Kinetic Modeling To Elucidate the Chemistry and Improve the Performance |
Type |
A1 Journal article |
| |
Year |
2019 |
Publication |
The journal of physical chemistry: C : nanomaterials and interfaces |
Abbreviated Journal |
J Phys Chem C |
| |
Volume |
123 |
Issue |
19 |
Pages |
12104-12116 |
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
| |
Abstract |
We study the mechanisms of CO2 conversion in a nanosecond repetitively pulsed (NRP) discharge, by means of a chemical kinetics model. The calculated conversions and energy efficiencies are in reasonable agreement with experimental results over a wide range of specific energy input values, and the same applies to the evolution of gas temperature and CO2 conversion as a function of time in the afterglow, indicating that our model provides a realistic picture of the underlying mechanisms in the NRP discharge and can be used to identify its limitations and thus to suggest further improvements. Our model predicts that vibrational excitation is very important in the NRP discharge, explaining why this type of plasma yields energy-efficient CO2 conversion. A significant part of the CO2 dissociation occurs by electronic excitation from the lower vibrational levels toward repulsive electronic states, thus resulting in dissociation. However, vibration−translation (VT) relaxation (depopulating the higher vibrational levels) and CO + O recombination (CO + O + M → CO2 + M), as well as mixing of the converted gas with fresh gas entering the plasma in between the pulses, are limiting factors for the conversion and energy efficiency. Our model predicts that extra cooling, slowing down the rate of VT relaxation and of the above recombination reaction, thus enhancing the contribution of the highest vibrational levels to the overall CO2 dissociation, can further improve the performance of the NRP discharge for energy-efficient CO2 conversion. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000468368800009 |
Publication Date |
2019-05-16 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
1932-7447 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
4.536 |
Times cited |
4 |
Open Access |
Not_Open_Access: Available from 26.04.2020
|
| |
Notes |
Fonds Wetenschappelijk Onderzoek, G.0383.16N ; The authors acknowledge financial support from the Fund for Scientific Research, Flanders (FWO; Grant no. G.0383.16N). |
Approved |
Most recent IF: 4.536 |
| |
Call Number |
PLASMANT @ plasmant @UA @ admin @ c:irua:159976 |
Serial |
5174 |
| Permanent link to this record |
| |
|
| |
|
Author |
Bafekry, A.; Shayesteh, S.F.; Peeters, F.M. |
| |
Title |
C3N Monolayer: Exploring the Emerging of Novel Electronic and Magnetic Properties with Adatom Adsorption, Functionalizations, Electric Field, Charging, and Strain |
Type |
A1 Journal article |
| |
Year |
2019 |
Publication |
The journal of physical chemistry: C : nanomaterials and interfaces |
Abbreviated Journal |
J Phys Chem C |
| |
Volume |
123 |
Issue |
19 |
Pages |
12485-12499 |
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; Condensed Matter Theory (CMT) |
| |
Abstract |
Two-dimensional polyaniline with structural unit C3N is an indirect semiconductor with 0.4 eV band gap, which has attracted a lot of interest because of its unusual electronic, optoelectronic, thermal, and mechanical properties useful for various applications. Adsorption of adatoms is an effective method to improve and tune the properties of C3N. Using first-principles calculations, we investigated the adsorption of adatoms, including H, O, S, F, Cl, B, C, Si, N, P, Al, Li, Na, K, Be, Mg, Ca, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, and Zn, on C3N. Depending on the adatom size and the number of valence electrons, they may induce metallic, half-metallic, semiconducting, and ferromagnetic-metallic behavior. In addition, we investigate the effects of an electrical field, charging, and strain on C3N and found how the electronic and magnetic properties are modified. Semi- and full hydrogenation are studied. From the mechanical and thermal stability of C3N monolayer, we found it to be a hard material that can withstand large strain. From our calculations, we gained novel insights into the properties of C3N demonstrating its unique electronic and magnetic properties that can be useful for semiconducting, nanosensor, and catalytic applications. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000468368800053 |
Publication Date |
2019-04-24 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
1932-7447; 1932-7455 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
4.536 |
Times cited |
81 |
Open Access |
|
| |
Notes |
; This work was supported by the Flemish Science Foundation (FW0-V1). The authors thank Keyvan Nazifi from the Cluster Center of Faculty of Science, Guilan University, for his help. They acknowledge OpenMX team for OpenMX code. ; |
Approved |
Most recent IF: 4.536 |
| |
Call Number |
UA @ admin @ c:irua:160323 |
Serial |
5196 |
| Permanent link to this record |
| |
|
| |
|
Author |
Badalov, S.V.; Yagmurcukardes, M.; Peeters, F.M.; Sahin, H. |
| |
Title |
Enhanced stability of single-layer w-Gallenene through hydrogenation |
Type |
A1 Journal article |
| |
Year |
2018 |
Publication |
The journal of physical chemistry: C : nanomaterials and interfaces |
Abbreviated Journal |
J Phys Chem C |
| |
Volume |
122 |
Issue |
49 |
Pages |
28302-28309 |
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; Condensed Matter Theory (CMT) |
| |
Abstract |
Using density functional theory based first-principles calculations, the effect of surface hydrogenation on the structural, dynamical, electronic, and mechanical properties of monolayer washboard-gallenene (w-gallenene) is investigated. It is found that the dynamically stabilized strained monolayer of w-gallenene has a metallic nonmagnetic ground state. Both one-sided and two-sided hydrogenations of w-gallenene suppress its dynamical instability even when unstrained. Unlike one-sided hydrogenated monolayer w-gallenene (os-w-gallenene), two-sided hydrogenated monolayer w-gallenene (ts-w-gallenene) possesses the same crystal structure as w-gallenene. Electronic band structure calculations reveal that monolayers of hydrogenated derivatives of w-gallenene exhibit also metallic nonmagnetic ground state. Moreover, the linear-elastic constants, in-plane stiffness and Poisson ratio, are enhanced by hydrogenation, which is opposite to the behavior of other hydrogenated monolayer crystals. Furthermore, monolayer w-gallenene and ts-w-gallenene remain dynamically stable up to relatively higher biaxial strains as compared to borophene. With its enhanced dynamical stability, robust metallic character, and enhanced linear-elastic properties, hydrogenated monolayer w-gallenene is a potential candidate for nanodevice applications as a two-dimensional flexible metal. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000453488300053 |
Publication Date |
2018-11-12 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
1932-7447; 1932-7455 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
4.536 |
Times cited |
20 |
Open Access |
|
| |
Notes |
; Computational resources were provided by TUBITAK ULAKBIM, High Performance and Grid Computing Center (TR-Grid e-Infrastructure). H.S. acknowledges support from Turkish Academy of Sciences under the GEBIP program. This work was supported by FLAG-ERA project TRANS-2D-TMD. This work is supported by the Flemish Science Foundation (FWO-Vl) by a postdoctoral fellowship (M.Y.). ; |
Approved |
Most recent IF: 4.536 |
| |
Call Number |
UA @ admin @ c:irua:156229 |
Serial |
5210 |
| Permanent link to this record |
| |
|
| |
|
Author |
Kahraman, Z.; Kandemir, A.; Yagmurcukardes, M.; Sahin, H. |
| |
Title |
Single-layer Janus-type platinum dichalcogenides and their heterostructures |
Type |
A1 Journal article |
| |
Year |
2019 |
Publication |
The journal of physical chemistry: C : nanomaterials and interfaces |
Abbreviated Journal |
J Phys Chem C |
| |
Volume |
123 |
Issue |
7 |
Pages |
4549-4557 |
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; Condensed Matter Theory (CMT) |
| |
Abstract |
Ultrathin two-dimensional Janus-type platinum dichalcogenide crystals formed by two different atoms at opposite surfaces are investigated by performing state-of-the-art density functional theory calculations. First, it is shown that single-layer PtX2 structures (where X = S, Se, or Te) crystallize into the dynamically stable IT phase and are indirect band gap semiconductors. It is also found that the substitutional chalcogen doping in all PtX2 structures is favorable via replacement of surface atoms with a smaller chalcogen atom, and such a process leads to the formation of Janus-type platinum dichalcogenides (XPtY, where X and Y stand for S, Se, or Te) which are novel single-layer crystals. While all Janus structures are indirect band gap semiconductors as their binary analogues, their Raman spectra show distinctive features that stem from the broken out-of-plane symmetry. In addition, it is revealed that the construction of Janus crystals enhances the piezoelectric constants of PtX2 crystals significantly both in the in plane and in the out-of-plane directions. Moreover, it is shown that vertically stacked van der Waals heterostructures of binary and ternary (Janus) platinum dichalcogenides offer a wide range of electronic features by forming bilayer heterojunctions of type-I, type-II, and type-III, respectively. Our findings reveal that Janus-type ultrathin platinum dichalcogenide crystals are quite promising materials for optoelectronic device applications. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000459836900071 |
Publication Date |
2019-01-24 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
1932-7447; 1932-7455 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
4.536 |
Times cited |
20 |
Open Access |
|
| |
Notes |
; Computational resources were provided by TUBITAK ULAKBIM, High Performance and Grid Computing Center (TR-Grid e-Infrastructure). H.S. and Z.K. acknowledge financial support from the TUBITAK under the project number 117F095. This work is supported by the Flemish Science Foundation (FWO-Vl) by a post-doctoral fellowship (M.Y.). H.S. acknowledges support from Turkiye Bilimler Akademisi-Turkish Academy of Sciences under the GEBIP program. ; |
Approved |
Most recent IF: 4.536 |
| |
Call Number |
UA @ admin @ c:irua:158617 |
Serial |
5229 |
| Permanent link to this record |
| |
|
| |
|
Author |
Jafarzadeh, A.; Bal, K.M.; Bogaerts, A.; Neyts, E.C. |
| |
Title |
CO2 activation on TiO2-supported Cu5 and Ni5 nanoclusters : effect of plasma-induced surface charging |
Type |
A1 Journal article |
| |
Year |
2019 |
Publication |
The journal of physical chemistry: C : nanomaterials and interfaces |
Abbreviated Journal |
J Phys Chem C |
| |
Volume |
123 |
Issue |
11 |
Pages |
6516-6525 |
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
| |
Abstract |
Surface charging is an often overlooked factor in many plasma-surface interactions and in particular in plasma catalysis. In this study, we investigate the effect of excess electrons induced by a plasma on the adsorption properties of CO2 on titania-supported Cu-5 and Ni-5 clusters using spin-polarized and dispersion-corrected density functional theory calculations. The effect of excess electrons on the adsorption of Ni and Cu pentamers as well as on CO2 adsorption on a pristine anatase TiO2(101) slab is studied. Our results indicate that adding plasma-induced excess electrons to the system leads to further stabilization of the bent CO2 structure. Also, dissociation of CO2 on charged clusters is energetically more favorable than on neutral clusters. We hypothesize that surface charge is a plausible cause for the synergistic effects sometimes observed in plasma catalysis. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000462260700024 |
Publication Date |
2019-02-21 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
1932-7447; 1932-7455 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
4.536 |
Times cited |
4 |
Open Access |
OpenAccess |
| |
Notes |
|
Approved |
Most recent IF: 4.536 |
| |
Call Number |
UA @ admin @ c:irua:159422 |
Serial |
5281 |
| Permanent link to this record |
| |
|
| |
|
Author |
Vermeiren, V.; Bogaerts, A. |
| |
Title |
Improving the Energy Efficiency of CO2Conversion in Nonequilibrium Plasmas through Pulsing |
Type |
A1 Journal article |
| |
Year |
2019 |
Publication |
The journal of physical chemistry: C : nanomaterials and interfaces |
Abbreviated Journal |
J Phys Chem C |
| |
Volume |
123 |
Issue |
29 |
Pages |
17650-17665 |
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
| |
Abstract |
Nonequilibrium plasmas offer a pathway for energy-efficient CO2 conversion through vibrationally induced dissociation. However, the efficiency of this pathway is limited by a rise in gas temperature, which increases vibrational−translational (VT) relaxation and quenches the vibrational levels. Therefore, we investigate here the effect of plasma pulsing on the VT nonequilibrium and on the CO2 conversion by means of a zerodimensional chemical kinetics model, with self-consistent gas temperature calculation. Specifically, we show that higher energy efficiencies can be reached by correctly tuning the plasma pulse and interpulse times. The ideal plasma pulse time corresponds to the time needed to reach the highest vibrational temperature. In addition, the highest energy efficiencies are obtained with long interpulse times, that is, ≥0.1 s, in which the gas temperature can entirely drop to room temperature. Furthermore, additional cooling of the reactor walls can give higher energy efficiencies at shorter interpulse times of 1 ms. Finally, our model shows that plasma pulsing can significantly improve the energy efficiency at low reduced electric fields (50 and 100 Td, typical for microwave and gliding arc plasmas) and intermediate ionization degrees (5 × 10−7 and 10−6). |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000477785000003 |
Publication Date |
2019-07-25 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
1932-7447 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
4.536 |
Times cited |
1 |
Open Access |
|
| |
Notes |
Fonds Wetenschappelijk Onderzoek, G.0383.16N ; This research was supported by the FWO project (grant G.0383.16N). The calculations were performed using the Turing HPC infrastructure at the CalcUA core facility of the Universiteit Antwerpen (UAntwerpen), a division of the Flemish Supercomputer Center VSC, funded by the Hercules Foundation, the Flemish Government (department EWI), and the UAntwerpen. We also like to thank N. Britun (ChIPS) for the interesting discussions. |
Approved |
Most recent IF: 4.536 |
| |
Call Number |
PLASMANT @ plasmant @c:irua:161621 |
Serial |
5289 |
| Permanent link to this record |
| |
|
| |
|
Author |
Borah, R.; Verbruggen, S.W. |
| |
Title |
Coupled plasmon modes in 2D gold nanoparticle clusters and their effect on local temperature control |
Type |
A1 Journal article |
| |
Year |
2019 |
Publication |
The journal of physical chemistry: C : nanomaterials and interfaces |
Abbreviated Journal |
J Phys Chem C |
| |
Volume |
123 |
Issue |
50 |
Pages |
30594-30603 |
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL) |
| |
Abstract |
Assemblies of closely separated gold nanoparticles exhibit a strong collective plasmonic response due to coupling of the plasmon modes of the individual nanostructures. In the context of self-assembly of nanoparticles, close-packed two-dimensional (2D) clusters of spherical nanoparticles present an important composite system that promises numerous applications. The present study probes the collective plasmonic characteristics and resulting photothermal behavior of close-packed 2D Au nanoparticle clusters to delineate the effects of the cluster size, interparticle distance, and particle size. Smaller nanoparticles (20 and 40 nm in diameter) that exhibit low individual scattering and high absorption were considered for their relevance to photothermal applications. In contrast to typical literature studies, the present study compares the optical response of clusters of different sizes ranging from a single nanoparticle up to large assemblies of 61 nanoparticles. Increasing the cluster size induces significant changes to the spectral position and optophysical characteristics. Based on the model outcome, an optimal cluster size for maximum absorption per nanoparticle is also determined for enhanced photothermal effects. The effect of the particle size and interparticle distance is investigated to elucidate the nature of interaction in terms of near-field and far-field coupling. The photothermal effect resulting from absorption is compared for different cluster sizes and interparticle distances considering a homogeneous water medium. A strong dependence of the steady-state temperature of the nanoparticles on the cluster size, particle position in the cluster, incident light polarization, and interparticle distance provides new physical insight into the local temperature control of plasmonic nanostructures. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000503919500061 |
Publication Date |
2019-11-20 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
1932-7447; 1932-7455 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
4.536 |
Times cited |
|
Open Access |
|
| |
Notes |
|
Approved |
Most recent IF: 4.536 |
| |
Call Number |
UA @ admin @ c:irua:164530 |
Serial |
5938 |
| Permanent link to this record |
| |
|
| |
|
Author |
Verbruggen, S.W.; Keulemans, M.; Martens, J.A.; Lenaerts, S. |
| |
Title |
Predicting the surface plasmon resonance wavelength of gold-silver alloy nanoparticles |
Type |
A1 Journal article |
| |
Year |
2013 |
Publication |
The journal of physical chemistry: C : nanomaterials and interfaces |
Abbreviated Journal |
J Phys Chem C |
| |
Volume |
117 |
Issue |
37 |
Pages |
19142-19145 |
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; Sustainable Energy, Air and Water Technology (DuEL) |
| |
Abstract |
Gold-silver alloy nanoparticles display surface plasmon resonance (SPR) over a broad range of the UV-vis spectrum. We propose a model to predict the SPR wavelength of gold-silver alloy colloids based on the combined effect of alloy composition and particle size. The SPR wavelength is derived from extinction spectra simulated using available experimental dielectric constant data and accounts for particle size by applying Mie theory. Comparison of calculated values with experimental data evidences the accuracy of the model. The new SPR wavelength estimation tool will be of particular interest for developing dedicated bimetallic plasmonic nanostructures. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000330162600042 |
Publication Date |
2013-08-27 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
1932-7447; 1932-7455 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
4.536 |
Times cited |
51 |
Open Access |
|
| |
Notes |
; S.W.V. acknowledges the Research Foundation of Flanders (FWO) for financial support. JAM. acknowledges the Flemish government for long-term structural funding (Methusalem). ; |
Approved |
Most recent IF: 4.536; 2013 IF: 4.835 |
| |
Call Number |
UA @ admin @ c:irua:114837 |
Serial |
5985 |
| Permanent link to this record |
| |
|
| |
|
Author |
Sirotina, A.P.; Callaert, C.; Volykhov, A.A.; Frolov, A.S.; Sanchez-Barriga, J.; Knop-Gericke, A.; Hadermann, J.; Yashina, L.V. |
| |
Title |
Mechanistic studies of gas reactions with multicomponent solids : what can we learn by combining NAP XPS and atomic resolution STEM/EDX? |
Type |
A1 Journal article |
| |
Year |
2019 |
Publication |
The journal of physical chemistry: C : nanomaterials and interfaces |
Abbreviated Journal |
J Phys Chem C |
| |
Volume |
123 |
Issue |
43 |
Pages |
26201-26210 |
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
| |
Abstract |
Rapid development of experimental techniques has enabled real time studies of solid gas reactions at the level reaching the atomic scale. In the present paper, we focus on a combination of atomic resolution STEM/EDX, which visualizes the reaction zone, and near ambient pressure (NAP) XPS, which collects information for a surface layer of variable thickness under reaction conditions. We compare the behavior of two affined topological insulators, Bi2Te3 and Sb2Te3. We used a simple reaction with molecular oxygen occurring at 298 K, which is of practical importance to avoid material degradation. Despite certain limitations, a combination of in situ XPS and ex situ cross-sectional STEM/EDX allowed us to obtain a self-consistent picture of the solid gas reaction mechanism for oxidation of Sb2Te3 and Bi2Te3 crystals, which includes component redistribution between the oxide and the subsurface layer and Te segregation with formation of a thin ordered layer at the interface. The process is multistep in case of both compounds. At the very beginning of the oxidation process the reactivity is determined by the energy benefit of the corresponding element oxygen bond formation. Further in the oxidation process, the behavior of these two compounds becomes similar and features component redistribution between the oxide and the subsurface layer. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000493865700019 |
Publication Date |
2019-10-03 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
1932-7447; 1932-7455 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
4.536 |
Times cited |
|
Open Access |
|
| |
Notes |
|
Approved |
Most recent IF: 4.536 |
| |
Call Number |
UA @ admin @ c:irua:164664 |
Serial |
6310 |
| Permanent link to this record |
| |
|
| |
|
Author |
Eren, I.; Ozen, S.; Sozen, Y.; Yagmurcukardes, M.; Sahin, H. |
| |
Title |
Vertical van der Waals heterostructure of single layer InSe and SiGe |
Type |
A1 Journal article |
| |
Year |
2019 |
Publication |
The journal of physical chemistry: C : nanomaterials and interfaces |
Abbreviated Journal |
J Phys Chem C |
| |
Volume |
123 |
Issue |
51 |
Pages |
31232-31237 |
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; Condensed Matter Theory (CMT) |
| |
Abstract |
We present a first-principles investigation on the stability, electronic structure, and mechanical response of ultrathin heterostructures composed of single layers of InSe and SiGe. First, by performing total energy optimization and phonon calculations, we show that single layers of InSe and SiGe can form dynamically stable heterostructures in 12 different stacking types. Valence and conduction band edges of the heterobilayers form a type-I heterojunction having a tiny band gap ranging between 0.09 and 0.48 eV. Calculations on elastic-stiffness tensor reveal that two mechanically soft single layers form a heterostructure which is stiffer than the constituent layers because of relatively strong interlayer interaction. Moreover, phonon analysis shows that the bilayer heterostructure has highly Raman active modes at 205.3 and 43.7 cm(-1), stemming from the out-of-plane interlayer mode and layer breathing mode, respectively. Our results show that, as a stable type-I heterojunction, ultrathin heterobilayer of InSe/SiGe holds promise for nanoscale device applications. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000505632900050 |
Publication Date |
2019-12-03 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
1932-7447; 1932-7455 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
4.536 |
Times cited |
|
Open Access |
|
| |
Notes |
|
Approved |
Most recent IF: 4.536 |
| |
Call Number |
UA @ admin @ c:irua:165718 |
Serial |
6332 |
| Permanent link to this record |
| |
|
| |
|
Author |
Barhoum, A.; Van Assche, G.; Rahier, H.; Fleisch, M.; Bals, S.; Delplancked, M.-P.; Leroux, F.; Bahnemann, D. |
| |
Title |
Sol-gel hot injection synthesis of ZnO nanoparticles into a porous silica matrix and reaction mechanism |
Type |
A1 Journal article |
| |
Year |
2017 |
Publication |
Materials & design |
Abbreviated Journal |
Mater Design |
| |
Volume |
119 |
Issue |
119 |
Pages |
270-276 |
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| |
Abstract |
Despite the enormous interest in the properties and applications of porous silica matrix, only a few attempts have been reported to deposit metal and metal oxide nanoparticles (NPs) inside the porous silica matrix. We report a simple approach (i.e. sol-gel hot injection) for insitu synthesis of ZnO NPs inside a porous silica matrix. Control of the Zn:Si molar ratio, reaction temperature, pH value, and annealing temperature permits formation of ZnO NPs (<= 10 nm) inside a porous silica particles, without additives or organic solvents. Results revealed that a solid state reaction inside the ZnO/SiO2 nanocomposites occurs with increasing the annealing temperature. The reaction of ZnO NPs with SiO2 matrix was insignificant up to approximately 500 degrees C. However, ZnO NPs react strongly with the silica matrix when the nanocomposites are annealed at temperatures above 700 degrees C. Extensive annealing of the ZnO/SiO2 nanocomposite at 900 degrees C yields 3D structures made of 500 nm rod-like, 5-7 pm tube-like and 35 pm needle-like Zn2SiO4 crystals. A possible mechanism for forming ZnO NPs inside porous silica matrix and phase transformation of the ZnO/SiO2 nanocomposites into 3D architectures of Zn2SiO4 are carefully discussed. (C) 2017 Elsevier Ltd. All rights reserved. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000397360000030 |
Publication Date |
2017-01-23 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
0264-1275 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
4.364 |
Times cited |
43 |
Open Access |
Not_Open_Access |
| |
Notes |
; A.B. would like to thank FWO – Research Foundation Flanders (grant no. V450315N) and the Strategic Initiative Materials in Flanders (SBO-project no. 130529 – INSITU) for financial support. TEM and TEM-EDX analyses were performed by Dr. F. Leroux (EMAT, Universiteit Antwerpen). XRD and DSC measurements were performed by T. Segato (4MAT, Universite Libre de Bruxelles). Notes: the authors declare no competing for financial interest. ; |
Approved |
Most recent IF: 4.364 |
| |
Call Number |
UA @ lucian @ c:irua:142394UA @ admin @ c:irua:142394 |
Serial |
4689 |
| Permanent link to this record |
| |
|
| |
|
Author |
Radi, A.; Khalil-Allafi, J.; Etminanfar, M.R.; Pourbabak, S.; Schryvers, D.; Amin-Ahmadi, B. |
| |
Title |
Influence of stress aging process on variants of nano-N4Ti3precipitates and martensitic transformation temperatures in NiTi shape memory alloy |
Type |
A1 Journal article |
| |
Year |
2018 |
Publication |
Materials & design |
Abbreviated Journal |
Mater Design |
| |
Volume |
262 |
Issue |
262 |
Pages |
74-81 |
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| |
Abstract |
In this study, the effect of a stress aging process on the microstructure and martensitic phase transformation of NiTi shape memory alloy has been investigated. NiTi samples were aged at 450 degrees C for 1 h and 5 h under different levels of external tensile stress of 15, 60 and 150 MPa. Transmission electron microscopy (TEM) was used to characterize different variants and morphology of precipitates. The results show that application of all stress levels restricts the formation of precipitates variants in the microstructure after I h stress aging process. However, all variants can be detected by prolonging aging time to 5 h at 15 MPa stress level and the variants formation is again restricted by increasing the stress level. Moreover, the stress aging process resulted in changing the shape of precipitates in comparison with that of the stress-free aged samples. Coffee-bean shaped morphologies were detected for precipitates in all stress levels. According to the Differential Scanning Calorimetry (DSC) results, the martensite start temperature (M-s) on cooling shifts to higher temperatures with increasing the tensile stress during the aging process. This can be related to the change ofaustenite to martensite interface energy due to the different volume fractions and variants of precipitates. (c) 2018 Elsevier Ltd. All rights reserved. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
|
Publication Date |
2018-01-04 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
0264-1275 |
ISBN |
|
Additional Links |
UA library record; ; WoS full record; WoS citing articles |
| |
Impact Factor |
4.364 |
Times cited |
|
Open Access |
OpenAccess |
| |
Notes |
|
Approved |
Most recent IF: 4.364 |
| |
Call Number |
UA @ lucian @ c:irua:149854 |
Serial |
4938 |
| Permanent link to this record |
| |
|
| |
|
Author |
Miotti Bettanini, A.; Ding, L.; Mithieux, J.-D.; Parrens, C.; Idrissi, H.; Schryvers, D.; Delannay, L.; Pardoen, T.; Jacques, P.J. |
| |
Title |
Influence of M23C6 dissolution on the kinetics of ferrite to austenite transformation in Fe-11Cr-0.06C stainless steel |
Type |
A1 Journal article |
| |
Year |
2019 |
Publication |
Materials & design |
Abbreviated Journal |
Mater Design |
| |
Volume |
162 |
Issue |
|
Pages |
362-374 |
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| |
Abstract |
The design of high-strength martensitic stainless steels requires an accurate control over the stability of undesired phases, like carbides and ferrite, which can hamper strength and ductility. Here, the ferrite to austenite transformation in Fe-11Cr-0.06C has been studied with a combined experimental-modelling approach. Experimental observations of the austenization process indicate that austenite growth proceeds in multiple steps, each one characterized by a different transformation rate. DICTRA based modelling reveals that the dissolution of the M23C6 Cr-rich carbides leads to Cr partitioning between austenite and parent phases, which controls the rate of transformation through (i) a soft-impingement effect and (ii) consequent stabilization of the ferrite, which remains untransformed inside chromium-enriched-zones even after prolonged austenization stage. Slow heating rate and smaller initial particle sizes allow the design of ferrite-free microstructure. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000454128400036 |
Publication Date |
2018-12-06 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
0264-1275 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
4.364 |
Times cited |
3 |
Open Access |
OpenAccess |
| |
Notes |
The authors thank Professor Anne-Francoise Gourgues-Lorenzon and Helene Godin, Ecole Nationale Superiore des Mines de Paris (MINES ParisTech) for their fruitful discussions. AMB thanks Stijn Van den broek (Universiteit Antwerpen) for the skillful preparation of TEM samples with FIB. The financial support of CBMM (Companhia Brasileira de Metalurgia e Mineracao) is gratefully acknowledged. L. Delannay is mandated by the FNRS-Belgium. Computational resources have been provided by the supercomputing facilities of the UCLouvain (CISM/UCL) and the Consortium des Equipements de Calcul Intensif en Federation Wallonie Bruxelles (CÉCI) funded by the Fond de la Recherche Scientifique de Belgique (F.R.S.-FNRS) under convention 2.5020.11.; Cbmm; F.r.s.-fnrs, 2.5020.11 ; |
Approved |
Most recent IF: 4.364 |
| |
Call Number |
EMAT @ emat @UA @ admin @ c:irua:156721 |
Serial |
5161 |
| Permanent link to this record |
| |
|
| |
|
Author |
Montero-Sistiaga, M.L.; Pourbabak, S.; Van Humbeeck, J.; Schryvers, D.; Vanmeensel, K. |
| |
Title |
Microstructure and mechanical properties of Hastelloy X produced by HP-SLM (high power selective laser melting) |
Type |
A1 Journal article |
| |
Year |
2019 |
Publication |
Materials & design |
Abbreviated Journal |
Mater Design |
| |
Volume |
165 |
Issue |
|
Pages |
107598 |
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| |
Abstract |
In order to increase the production rate during selective laser melting (SLM), a high power laser with a large beam diameter is used to build fully dense Hastelloy X parts. Compared to SLM with a low power and small diameter beam, the productivity was increased from 6 mm3/s to 16 mm3/s, i.e. 2.6 times faster. Besides the productivity benefit, the influence of the use of a high power laser on the rapid solidification microstructure and concomitant material properties is highlighted. The current paper compares the microstructure and tensile properties of Hastelloy X built with low and high power lasers. The use of a high power laser results in wider and shallower melt pools inducing an enhanced morphological and crystallographic texture along the building direction (BD). In addition, the increased heat input results in coarser sub-grains or high density dislocation walls for samples processed with a high power laser. Additionally, the influence of hot isostatic pressing (HIP) as a post-processing technique was evaluated. After HIP, the tensile fracture strain increased as compared to the strain in the as-built state and helped in obtaining competitive mechanical properties as compared to conventionally processed Hastelloy X parts. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000458259300020 |
Publication Date |
2019-01-09 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
0264-1275 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
4.364 |
Times cited |
15 |
Open Access |
OpenAccess |
| |
Notes |
This research was supported by the ENGIE Research and Technology Division. The authors acknowledge ENGIE Research and Technology Division for the use of the SLM280HL machine. S.P. likes to thank the Flemish Science Foundation FWO for financial support under Project G.0366.15N. |
Approved |
Most recent IF: 4.364 |
| |
Call Number |
EMAT @ emat @UA @ admin @ c:irua:157469 |
Serial |
5176 |
| Permanent link to this record |
| |
|
| |
|
Author |
Iyikanat, F.; Sahin, H.; Senger, R.T.; Peeters, F.M. |
| |
Title |
Ag and Au atoms intercalated in bilayer heterostructures of transition metal dichalcogenides and graphene |
Type |
A1 Journal article |
| |
Year |
2014 |
Publication |
APL materials |
Abbreviated Journal |
Apl Mater |
| |
Volume |
2 |
Issue |
9 |
Pages |
092801 |
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; Condensed Matter Theory (CMT) |
| |
Abstract |
The diffusive motion of metal nanoparticles Au and Ag on monolayer and between bilayer heterostructures of transition metal dichalcogenides and graphene are investigated in the framework of density functional theory. We found that the minimum energy barriers for diffusion and the possibility of cluster formation depend strongly on both the type of nanoparticle and the type of monolayers and bilayers. Moreover, the tendency to form clusters of Ag and Au can be tuned by creating various bilayers. Tunability of the diffusion characteristics of adatoms in van der Waals heterostructures holds promise for controllable growth of nanostructures. (C) 2014 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution 3.0 Unported License. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000342568000020 |
Publication Date |
2014-08-28 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
2166-532X |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
4.335 |
Times cited |
10 |
Open Access |
|
| |
Notes |
; This work was supported by the Flemish Science Foundation (FWO-Vl) and the Methusalem foundation of the Flemish government. Computational resources were provided by TUBITAK ULAKBIM, High Performance and Grid Computing Center (TR-Grid e-Infrastructure), and HPC infrastructure of the University of Antwerp (CalcUA) a division of the Flemish Supercomputer Center (VSC), which is funded by the Hercules foundation. H.S. is supported by a FWO Pegasus Marie Curie Fellowship. F.I. and R.T.S. acknowledge the support from TUBITAK Project No. 111T318. ; |
Approved |
Most recent IF: 4.335; 2014 IF: NA |
| |
Call Number |
UA @ lucian @ c:irua:119950 |
Serial |
82 |
| Permanent link to this record |
| |
|
| |
|
Author |
Blandy, J.N.; Abakumov, A.M.; Christensen, K.E.; Hadermann, J.; Adamson, P.; Cassidy, S.J.; Ramos, S.; Free, D.G.; Cohen, H.; Woodruff, D.N.; Thompson, A.L.; Clarke, S.J.; |
| |
Title |
Soft chemical control of the crystal and magnetic structure of a layered mixed valent manganite oxide sulfide |
Type |
A1 Journal article |
| |
Year |
2015 |
Publication |
APL materials |
Abbreviated Journal |
Apl Mater |
| |
Volume |
3 |
Issue |
3 |
Pages |
041520 |
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
| |
Abstract |
Oxidative deintercalation of copper ions from the sulfide layers of the layered mixed-valent manganite oxide sulfide Sr2MnO2Cu1.5S2 results in control of the copper-vacancy modulated superstructure and the ordered arrangement of magnetic moments carried by the manganese ions. This soft chemistry enables control of the structures and properties of these complex materials which complement mixed-valent perovskite and perovskite-related transition metal oxides. (C) 2015 Author(s). |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000353828400027 |
Publication Date |
2015-04-21 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
2166-532X; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
4.335 |
Times cited |
5 |
Open Access |
|
| |
Notes |
|
Approved |
Most recent IF: 4.335; 2015 IF: NA |
| |
Call Number |
c:irua:126021 |
Serial |
3049 |
| Permanent link to this record |
| |
|
| |
|
Author |
Hoek, M.; Coneri, F.; Poccia, N.; Renshaw Wang, X.; Ke, X.; Van Tendeloo, G.; Hilgenkamp, H. |
| |
Title |
Strain accommodation through facet matching in La1.85Sr0.15CuO4/Nd1.85Ce0.15CuO4 ramp-edge junctions |
Type |
A1 Journal article |
| |
Year |
2015 |
Publication |
APL materials |
Abbreviated Journal |
Apl Mater |
| |
Volume |
3 |
Issue |
3 |
Pages |
086101 |
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
| |
Abstract |
Scanning nano-focused X-ray diffraction and high-angle annular dark-field scanning transmission electron microscopy are used to investigate the crystal structure of ramp-edge junctions between superconducting electron-doped Nd1.85Ce0.15CuO4 and superconducting hole-doped La1.85Sr0.15CuO4 thin films, the latter being the top layer. On the ramp, a new growth mode of La1.85Sr0.15CuO4 with a 3.3° tilt of the c-axis is found. We explain the tilt by developing a strain accommodation model that relies on facet matching, dictated by the ramp angle, indicating that a coherent domain boundary is formed at the interface. The possible implications of this growth mode for the creation of artificial domains in morphotropic materials are discussed. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000360656800009 |
Publication Date |
2015-08-03 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
2166-532X; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
4.335 |
Times cited |
4 |
Open Access |
|
| |
Notes |
312483 Esteem2; 246791 Countatoms; esteem2_jra2 |
Approved |
Most recent IF: 4.335; 2015 IF: NA |
| |
Call Number |
c:irua:127690 c:irua:127690 |
Serial |
3163 |
| Permanent link to this record |
| |
|
| |
|
Author |
Leusink, D.P.; Coneri, F.; Hoek, M.; Turner, S.; Idrissi, H.; Van Tendeloo, G.; Hilgenkamp, H. |
| |
Title |
Thin films of the spin ice compound Ho2Ti2O7 |
Type |
A1 Journal article |
| |
Year |
2014 |
Publication |
APL materials |
Abbreviated Journal |
Apl Mater |
| |
Volume |
2 |
Issue |
3 |
Pages |
032101-32107 |
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
| |
Abstract |
The pyrochlore compounds Ho2Ti2O7 and Dy2Ti2O7 show an exotic form of magnetism called the spin ice state, resulting from the interplay between geometrical frustration and ferromagnetic coupling. A fascinating feature of this state is the appearance of magnetic monopoles as emergent excitations above the degenerate ground state. Over the past years, strong effort has been devoted to the investigation of these monopoles and other properties of the spin ice state in bulk crystals. Here, we report the fabrication of Ho2Ti2O7 thin films using pulsed laser deposition on yttria-stabilized ZrO2 substrates. We investigated the structural properties of these films by X-ray diffraction, scanning transmission electron microscopy, and atomic force microscopy, and the magnetic properties by vibrating sample magnetometry at 2 K. The films not only show a high crystalline quality, but also exhibit the hallmarks of a spin ice: a pronounced magnetic anisotropy and an intermediate plateau in the magnetization along the [111] crystal direction. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000334220300002 |
Publication Date |
2014-03-04 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
2166-532X; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
4.335 |
Times cited |
18 |
Open Access |
|
| |
Notes |
The authors acknowledge support from the Dutch FOM and NWO foundations and from the European Union under the Framework 7 program under a contract from an Integrated Infrastructure Initiative (Reference 312483 ESTEEM2). G.V.T. acknowledges the ERC Grant N246791- COUNTATOMS. S.T. gratefully acknowledges financial support from the Fund for Scientific Research Flanders (FWO). H.I. acknowledges the IAP program of the Belgian State Federal Office for Scientific, Technical and Cultural Affairs under Contract No. P7/21. The microscope used in this study was partially financed by the Hercules Foundation of the Flemish Government. The authors acknowledge fruitful interactions with A. Brinkman, M. G. Blamire, M. Egilmez, F. J. G. Roesthuis, J. N. Beukers, C. G. Molenaar, M. Veldhorst, and X. Renshaw Wang; esteem2_ta |
Approved |
Most recent IF: 4.335; 2014 IF: NA |
| |
Call Number |
UA @ lucian @ c:irua:115555 |
Serial |
3641 |
| Permanent link to this record |
| |
|
| |
|
Author |
Rizzo, F.; Augieri, A.; Angrisani Armenio, A.; Galluzzi, V.; Mancini, A.; Pinto, V.; Rufoloni, A.; Vannozzi, A.; Bianchetti, M.; Kursumovic, A.; MacManus-Driscoll, J.L.; Meledin, A.; Van Tendeloo, G.; Celentano, G. |
| |
Title |
Enhanced 77K vortex-pinning in YBa2Cu3O7−x films with Ba2YTaO6 and mixed Ba2YTaO6 + Ba2YNbO6 nano-columnar inclusions with irreversibility field to 11T |
Type |
A1 Journal article |
| |
Year |
2016 |
Publication |
APL materials |
Abbreviated Journal |
Apl Mater |
| |
Volume |
4 |
Issue |
4 |
Pages |
061101 |
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
| |
Abstract |
Pulsed laser deposited thin YBa2Cu3O7−x (YBCO) films with pinning additions of 5at.% Ba2YTaO6 (BYTO) were compared to films with 2.5at.% Ba2YTaO6 + 2.5at.% Ba2YNbO6 (BYNTO) additions. Excellent magnetic flux-pinning at 77 K was obtained with remarkably high irreversibility fields greater than 10T (YBCO-BYTO) and 11T (YBCO-BYNTO), representing the highest ever achieved values in YBCO films. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000379042400002 |
Publication Date |
2016-06-08 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
2166-532X |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
4.335 |
Times cited |
19 |
Open Access |
|
| |
Notes |
This work was financially supported by EUROTAPES, a collaborative project funded by the European Commission’s Seventh Framework Program (FP7 / 2007-2013) under Grant Agreement no. 280432 |
Approved |
Most recent IF: 4.335 |
| |
Call Number |
c:irua:133785 |
Serial |
4077 |
| Permanent link to this record |
| |
|
| |
|
Author |
Benetti, G.; Cavaliere, E.; Canteri, A.; Landini, G.; Rossolini, G.M.; Pallecchi, L.; Chiodi, M.; Van Bael, M.J.; Winckelmans, N.; Bals, S.; Gavioli, L. |
| |
Title |
Direct synthesis of antimicrobial coatings based on tailored bi-elemental nanoparticles |
Type |
A1 Journal article |
| |
Year |
2017 |
Publication |
APL materials |
Abbreviated Journal |
Apl Mater |
| |
Volume |
5 |
Issue |
5 |
Pages |
036105 |
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
| |
Abstract |
Ultrathin coatings based on bi-elemental nanoparticles (NPs) are very promising to limit the surface-related spread of bacterial pathogens, particularly in nosocomial environments. However, tailoring the synthesis, composition, adhesion to substrate, and antimicrobial spectrum of the coating is an open challenge. Herein, we report on a radically new nanostructured coating, obtained by a one-step gas-phase deposition technique, and composed of bi-elemental Janus type Ag/Ti NPs. The NPs are characterized by a cluster-in-cluster mixing phase with metallic Ag nano-crystals embedded in amorphous TiO2 and present a promising antimicrobial activity including also multidrug resistant strains. We demonstrate the flexibility of the method to tune the embedded Ag nano-crystals dimension, the total relative composition of the coating, and the substrate type, opening the possibility of tailoring the dimension, composition, antimicrobial spectrum, and other physical/chemical properties of such multi-elemental systems. This work is expected to significantly spread the range of applications of NPs coatings, not only as an effective tool in the prevention of healthcare-associated infections but also in other technologically relevant fields like sensors or nano-/micro joining. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000398951000014 |
Publication Date |
2017-03-20 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
2166-532X |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
4.335 |
Times cited |
21 |
Open Access |
OpenAccess |
| |
Notes |
We thank Urs Gfeller for the XRF measurements, Francesco Banfi for valuable discussions on the manuscript and Giulio Viano for his valuable support in the microbiological analysis. The authors acknowledge the financial support of Universita Cattolica del Sacro Cuore through D.2.2 and D.3.1 grants and from the European Union through the 7th Framework Program (FP7) under a contract for an Integrated Infrastructure Initiative (Reference No. 312483 ESTEEM2). REFERENCES |
Approved |
Most recent IF: 4.335 |
| |
Call Number |
EMAT @ emat @ c:irua:141723UA @ admin @ c:irua:141723 |
Serial |
4479 |
| Permanent link to this record |
| |
|
| |
|
Author |
Ramaneti, R.; Sankaran, K.J.; Korneychuk, S.; Yeh, C.J.; Degutis, G.; Leou, K.C.; Verbeeck, J.; Van Bael, M.K.; Lin, I.N.; Haenen, K. |
| |
Title |
Vertically aligned diamond-graphite hybrid nanorod arrays with superior field electron emission properties |
Type |
A1 Journal article |
| |
Year |
2017 |
Publication |
APL materials |
Abbreviated Journal |
Apl Mater |
| |
Volume |
5 |
Issue |
6 |
Pages |
066102 |
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
| |
Abstract |
A “patterned-seeding technique” in combination with a “nanodiamond masked reactive ion etching process” is demonstrated for fabricating vertically aligned diamond-graphite hybrid (DGH) nanorod arrays. The DGH nanorod arrays possess superior field electron emission (FEE) behavior with a low turn-on field, long lifetime stability, and large field enhancement factor. Such an enhanced FEE is attributed to the nanocomposite nature of theDGHnanorods, which contain sp(2)-graphitic phases in the boundaries of nano-sized diamond grains. The simplicity in the nanorod fabrication process renders the DGH nanorods of greater potential for the applications as cathodes in field emission displays and microplasma display devices. (C) 2017 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution (CC BY) license. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000404623000002 |
Publication Date |
2017-06-08 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
2166-532x |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
4.335 |
Times cited |
16 |
Open Access |
|
| |
Notes |
The authors would like to thank the Methusalem “NANO” network for financial support and Mr. B. Ruttens and Professor Jan D'Haen for technical and experimental assistance. K.J. Sankaran is a Postdoctoral Fellow of the Research Foundation-Flanders (FWO). |
Approved |
Most recent IF: 4.335 |
| |
Call Number |
UA @ admin @ c:irua:152633 |
Serial |
5369 |
| Permanent link to this record |
| |
|
| |
|
Author |
Do, M.T.; Gauquelin, N.; Nguyen, M.D.; Blom, F.; Verbeeck, J.; Koster, G.; Houwman, E.P.; Rijnders, G. |
| |
Title |
Interface degradation and field screening mechanism behind bipolar-cycling fatigue in ferroelectric capacitors |
Type |
A1 Journal article |
| |
Year |
2021 |
Publication |
Apl Materials |
Abbreviated Journal |
Apl Mater |
| |
Volume |
9 |
Issue |
2 |
Pages |
021113 |
| |
Keywords |
A1 Journal article; Engineering sciences. Technology; Electron microscopy for materials research (EMAT) |
| |
Abstract |
Polarization fatigue, i.e., the loss of polarization of ferroelectric capacitors upon field cycling, has been widely discussed as an interface related effect. However, mechanism(s) behind the development of fatigue have not been fully identified. Here, we study the fatigue mechanisms in Pt/PbZr0.52Ti0.48O3/SrRuO3 (Pt/PZT/SRO) capacitors in which all layers are fabricated by pulsed laser deposition without breaking the vacuum. With scanning transmission electron microscopy, we observed that in the fatigued capacitor, the Pt/PZT interface becomes structurally degraded, forming a 5 nm-10 nm thick non-ferroelectric layer of crystalline ZrO2 and diffused Pt grains. We then found that the fatigued capacitors can regain the full initial polarization switching if the externally applied field is increased to at least 10 times the switching field of the pristine capacitor. These findings suggest that polarization fatigue is driven by a two-step mechanism. First, the transient depolarization field that repeatedly appears during the domain switching under field cycling causes decomposition of the metal/ferroelectric interface, resulting in a non-ferroelectric degraded layer. Second, this interfacial non-ferroelectric layer screens the external applied field causing an increase in the coercive field beyond the usually applied maximum field and consequently suppresses the polarization switching in the cycled capacitor. Our work clearly confirms the key role of the electrode/ferroelectric interface in the endurance of ferroelectric-based devices. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000630052100006 |
Publication Date |
2021-02-09 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
2166-532x |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
4.335 |
Times cited |
5 |
Open Access |
OpenAccess |
| |
Notes |
This work was supported by the Nederlandse Organisatie voor Wetenschappelijk Onderzoek through Grant No. F62.3.15559. The Qu-Ant-EM microscope and the direct electron detector were partly funded by the Hercules fund from the Flemish Government. N.G. and J.V. acknowledge funding from the GOA project “Solarpaint” of the University of Antwerp. This work has also received funding from the European Union's Horizon 2020 research and innovation program under Grant No. 823717-ESTEEM3. We acknowledge D. Chezganov for his useful insights. |
Approved |
Most recent IF: 4.335 |
| |
Call Number |
UA @ admin @ c:irua:177663 |
Serial |
6783 |
| Permanent link to this record |
| |
|
| |
|
Author |
Huijben, M.; Liu, Y.; Boschker, H.; Lauter, V.; Egoavil, R.; Verbeeck, J.; te Velthuis, S.G.E.; Rijnders, G.; Koster, G. |
| |
Title |
Enhanced local magnetization by interface engineering in perovskite-type correlated oxide heterostructures |
Type |
A1 Journal article |
| |
Year |
2015 |
Publication |
Advanced Materials Interfaces |
Abbreviated Journal |
Adv Mater Interfaces |
| |
Volume |
2 |
Issue |
2 |
Pages |
1400416 |
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| |
Abstract |
|
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000349916000001 |
Publication Date |
2015-01-02 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
2196-7350; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
4.279 |
Times cited |
30 |
Open Access |
|
| |
Notes |
Hercules; 246791 COUNTATOMS; 278510 VORTEX; 246102 IFOX; 312483 ESTEEM2; FWO G004413N; esteem2jra3 ECASJO; |
Approved |
Most recent IF: 4.279; 2015 IF: NA |
| |
Call Number |
c:irua:125333 c:irua:125333UA @ admin @ c:irua:125333 |
Serial |
1052 |
| Permanent link to this record |
| |
|
| |
|
Author |
Barreca, D.; Carraro, G.; Gasparotto, A.; Maccato, C.; Warwick, M.E.A.; Kaunisto, K.; Sada, C.; Turner, S.; Gönüllü, Y.; Ruoko, T.-P.; Borgese, L.; Bontempi, E.; Van Tendeloo, G.; Lemmetyinen, H.; Mathur, S. |
| |
Title |
Fe2O3-TiO2Nano-heterostructure Photoanodes for Highly Efficient Solar Water Oxidation |
Type |
A1 Journal article |
| |
Year |
2015 |
Publication |
Advanced Materials Interfaces |
Abbreviated Journal |
Adv Mater Interfaces |
| |
Volume |
2 |
Issue |
2 |
Pages |
1500313 |
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| |
Abstract |
Harnessing solar energy for the production of clean hydrogen by photoelectrochemical water splitting represents a very attractive, but challenging approach for sustainable energy generation. In this regard, the fabrication of Fe2O3–TiO2 photoanodes is reported, showing attractive performances [≈2.0 mA cm−2 at 1.23 V vs. the reversible hydrogen electrode in 1 M NaOH] under simulated one-sun illumination. This goal, corresponding to a tenfold photoactivity enhancement with respect to bare Fe2O3, is achieved by atomic layer deposition of TiO2 over hematite (α-Fe2O3) nanostructures fabricated by plasma enhanced-chemical vapor deposition and final annealing at 650 °C. The adopted approach enables an intimate Fe2O3–TiO2 coupling, resulting in an electronic interplay at the Fe2O3/TiO2 interface. The reasons for the photocurrent enhancement determined by TiO2 overlayers with increasing thickness are unraveled by a detailed chemico-physical investigation, as well as by the study of photogenerated charge carrier dynamics. Transient absorption spectroscopy shows that the increased photoelectrochemical response of heterostructured photoanodes compared to bare hematite is due to an enhanced separation of photogenerated charge carriers and more favorable hole dynamics for water oxidation. The stable responses obtained even in simulated seawater provides a feasible route in view of the eventual large-scale generation of renewable energy. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000368914700011 |
Publication Date |
2015-09-03 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
2196-7350; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
4.279 |
Times cited |
56 |
Open Access |
|
| |
Notes |
The authors kindly acknowledge the fi nancial support under the FP7 project “SOLAROGENIX” (NMP4-SL-2012-310333), as well as Padova University ex-60% 2012–2014 projects, Grant No. CPDR132937/13 (SOLLEONE), and Regione Lombardia-INSTM ATLANTE projects. S.T. acknowledges the FWO Flanders for a postdoctoral scholarship. |
Approved |
Most recent IF: 4.279; 2015 IF: NA |
| |
Call Number |
c:irua:129201 |
Serial |
3957 |
| Permanent link to this record |
| |
|
| |
|
Author |
Yang, S.; Kang, J.; Yue, Q.; Coey, J.M.D.; Jiang, C. |
| |
Title |
Defect-modulated transistors and gas-enhanced photodetectors on ReS2 nanosheets |
Type |
A1 Journal article |
| |
Year |
2016 |
Publication |
Advanced Materials Interfaces |
Abbreviated Journal |
Adv Mater Interfaces |
| |
Volume |
3 |
Issue |
3 |
Pages |
1500707 |
| |
Keywords |
A1 Journal article; Condensed Matter Theory (CMT) |
| |
Abstract |
|
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000373149400011 |
Publication Date |
2016-01-18 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
2196-7350; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
4.279 |
Times cited |
22 |
Open Access |
|
| |
Notes |
; This work was supported by the National Natural Science Foundations of China (NSFC) under Grant No.51331001. The authors thank S. Tongay for giving them the ReS<INF>2</INF> crystals. ; |
Approved |
Most recent IF: 4.279 |
| |
Call Number |
UA @ lucian @ c:irua:133232 |
Serial |
4159 |
| Permanent link to this record |
| |
|
| |
|
Author |
Barreca, D.; Carraro, G.; Gasparotto, A.; Maccato, C.; Warwick, M.E.A.; Toniato, E.; Gombac, V.; Sada, C.; Turner, S.; Van Tendeloo, G.; Fornasiero, P.; |
| |
Title |
Iron-titanium oxide nanocomposites functionalized with gold particles : from design to solar hydrogen production |
Type |
A1 Journal article |
| |
Year |
2016 |
Publication |
Advanced Materials Interfaces |
Abbreviated Journal |
Adv Mater Interfaces |
| |
Volume |
3 |
Issue |
3 |
Pages |
1600348 |
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| |
Abstract |
Hematite-titania nanocomposites, eventually functionalized with gold nanoparticles (NPs), are designed and developed by a plasma-assisted strategy, consisting in: (i) the plasma enhanced-chemical vapor deposition of -Fe2O3 on fluorine-doped tin oxide substrates; the radio frequency-sputtering of (ii) TiO2, and (iii) Au in controlled amounts. A detailed chemicophysical characterization, carried out through a multitechnique approach, reveals that the target materials are composed by interwoven -Fe2O3 dendritic structures, possessing a high porosity and active area. TiO2 introduction results in the formation of an ultrathin titania layer uniformly covering Fe2O3, whereas Au sputtering yields a homogeneous dispersion of low-sized gold NPs. Due to the intimate and tailored interaction between the single constituents and their optical properties, the resulting composite materials are successfully exploited for solar-driven applications. In particular, promising photocatalytic performances in H-2 production by reforming of water-ethanol solutions under simulated solar illumination are obtained. The related insights, presented and discussed in this work, can yield useful guidelines to boost the performances of nanostructured photocatalysts for energy-related applications. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000383783200021 |
Publication Date |
2016-07-20 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
2196-7350; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
4.279 |
Times cited |
15 |
Open Access |
|
| |
Notes |
|
Approved |
Most recent IF: 4.279 |
| |
Call Number |
UA @ lucian @ c:irua:137154 |
Serial |
4389 |
| Permanent link to this record |
| |
|
| |
|
Author |
Smolin, S.Y.; Choquette, A.K.; Wilks, R.G.; Gauquelin, N.; Félix, R.; Gerlach, D.; Ueda, S.; Krick, A.L.; Verbeeck, J.; Bär, M.; Baxter, J.B.; May, S.J. |
| |
Title |
Energy Level Alignment and Cation Charge States at the LaFeO3/LaMnO3(001) Heterointerface |
Type |
A1 Journal article |
| |
Year |
2017 |
Publication |
Advanced Materials Interfaces |
Abbreviated Journal |
Adv Mater Interfaces |
| |
Volume |
4 |
Issue |
4 |
Pages |
1700183 |
| |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
| |
Abstract |
The electronic properties of LaFeO 3 /LaMnO 3 epitaxial heterojunctions are investigated to determine the valence and conduction band offsets and the nominal Mn and Fe valence states at the interface. Studying a systematic series of (LaFeO 3 ) n /(LaMnO 3 ) m bilayers (m ≈ 50) epitaxially grown in the (001) orientation using molecular beam epitaxy, layer-resolved electron energy loss spectroscopy reveals a lack of significant interfacial charge transfer, with a nominal 3+ valence state observed for both Mn and Fe across the interface. Through a combination of variable angle spectroscopic ellipsometry and hard X-ray photoelectron spectroscopy, type I energy level alignments are obtained at the LaFeO 3 /LaMnO 3 interface with positive valence and conduction band offsets of (1.20 ± 0.07) eV and (0.5–0.7 ± 0.3) eV, respectively, with minimal band bending. Variable temperature resistivity measurements reveal that the bilayers remain insulating and that the presence of the heterojunction does not result in a conducting interface. |
| |
Address |
|
| |
Corporate Author |
|
Thesis |
|
| |
Publisher |
|
Place of Publication |
|
Editor |
|
| |
Language |
|
Wos |
000406068400011 |
Publication Date |
2017-04-26 |
| |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
| |
Series Volume |
|
Series Issue |
|
Edition |
|
| |
ISSN |
2196-7350 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
| |
Impact Factor |
4.279 |
Times cited |
14 |
Open Access |
Not_Open_Access |
| |
Notes |
The authors thank Dmytro Nykypanchuk for assistance with the near- infrared ellipsometry measurement of the LaMnO 3 film. S.Y.S., A.K.C., J.B.B, and S.J.M. acknowledge funding from the National Science Foundation under grant number ECCS-1201957. S.Y.S. acknowledges additional funding from the German Academic Exchange Service (DAAD) through the Research Internships in Science and Engineering (RISE) professional program 2015 ID 5708457. A.L.K. was funded by the National Science Foundation under grant number DMR-1151649. J.V. and N.G. acknowledge funding through the GOA project “Solarpaint” of the University of Antwerp and from the FWO project G.0044.13N (Charge ordering). The microscope used in this work was partly funded by the Hercules Fund from the Flemish Government. Ellipsometry measurements of the LaMnO 3 film were carried out at the Center for Functional Nanomaterials, Brookhaven National Laboratory, which is supported by the U.S. Department of Energy, Office of Basic Energy Sciences, under Contract No. DE-ACO2-98CH10886. S.U. would like to thank the staff of HiSOR, Hiroshima University, and JAEA/Spring-8 for the development of HAXPES at BL15XU of SPring-8. The HAXPES measurements were performed with approval of NIMS Synchrotron X-ray Station (Proposal No. 2015B4601), and were partly supported by the Ministry of Education, Culture, Sports, Science and Technology (MEXT), Japan. The authors also thank HZB for the allocation of synchrotron radiation beamtime for HAXPES/XANES measurements. R.G.W., R.F, and M.B. are grateful to the Impuls- und Vernetzungsfonds of the Helmholtz Association (VH-NG-423).; National Science Foundation, ECCS-1201957 DMR-1151649 ; Deutscher Akademischer Austauschdienst, 2015 ID 5708457 ; GOA project; Fonds Wetenschappelijk Onderzoek, G.0044.13N ; Flemish Government; U.S. Department of Energy, DE-ACO2-98CH10886 ; Vernetzungsfonds of the Helmholtz Association, VH-NG-423 ; |
Approved |
Most recent IF: 4.279 |
| |
Call Number |
EMAT @ emat @ c:irua:142346UA @ admin @ c:irua:142346 |
Serial |
4553 |
| Permanent link to this record |
