Records |
Author |
De Schepper, E.; Van Passel, S.; Lizin, S. |
Title |
Economic benefits of combining clean energy technologies : the case of solar photovoltaics and battery electric vehicles |
Type |
A1 Journal article |
Year |
2015 |
Publication |
International Journal Of Energy Research |
Abbreviated Journal |
Int J Energ Res |
Volume |
39 |
Issue |
8 |
Pages |
1109-1119 |
Keywords |
A1 Journal article; Economics; Engineering sciences. Technology; Engineering Management (ENM) |
Abstract |
The combined use of clean technologies can lead amongst other benefits to reduced environmental impacts, improved system efficiencies, better management of land scarcity, and diminishment of the effect of power variability of intermittent clean energy sources. Nonetheless, private investors facing budgetary constraints will only opt to invest in the combination of technologies if the latter is more profitable than the investment in a single technology. The aim of the paper is to provide a systematic model for decision makers that allows them to evaluate the profitability of any random combination of technologies under budgetary constraints, and to compare this profitability with that of the individual projects in isolation. This research goes beyond the state of art in the field of financial management and more specifically in the field of the rationing of capital amongst interdependent projects, by developing a method to calculate the payoff of interdependent projects undertaken together. Moreover, this paper develops a computational model from the investor's point of view, of which the purpose is threefold: First, the model allows to directly compare the economic payoff of individual complementary technologies with the economic payoff of their integrated combination, under budgetary constraints. Second, the model calculates economic synergies labeled benefits of combined technologies' (BOCT) when combining complementary technologies. Third, the model explains the rationalization behind the presence of BOCT. The model exemplifies an ex ante cost benefit analysis developed for business and non-governmental use. A four step methodology is proposed and illustrated by means of a case study of PV solar power and battery electric vehicles (BEVs) for a small Belgian enterprise. Results show that at low electricity prices (<Euro0.112/kWh) it is most profitable to invest in BEVs. When the price of electricity rises (>Euro0.134/kWh), investment in exclusively PV becomes most attractive. In all other cases, it is more profitable to invest in the combination of both technologies. Copyright (c) 2015 John Wiley & Sons, Ltd. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
000355732200006 |
Publication Date |
2015-03-21 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0363-907x |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor ![sorted by Impact Factor field, descending order (down)](img/sort_desc.gif) |
2.598 |
Times cited |
14 |
Open Access |
|
Notes |
; Sebastien Lizin would like to thank the Research Foundation Flanders (FWO), grant number 12G5415N, for their funding without which it would have been impossible to review this work. ; |
Approved |
Most recent IF: 2.598; 2015 IF: 2.418 |
Call Number |
UA @ admin @ c:irua:127535 |
Serial |
6188 |
Permanent link to this record |
|
|
|
Author |
Cagno, S.; Hellemans, K.; Lind, O.C.; Skipperud, L.; Janssens, K.; Salbu, B. |
Title |
LA-ICP-MS for Pu source identification at Mayak PA, the Urals, Russia |
Type |
A1 Journal article |
Year |
2014 |
Publication |
Environmental science : processes & impacts |
Abbreviated Journal |
Environ Sci-Proc Imp |
Volume |
16 |
Issue |
2 |
Pages |
306-312 |
Keywords |
A1 Journal article; AXES (Antwerp X-ray Analysis, Electrochemistry and Speciation) |
Abstract |
Information on Pu in environmental samples is traditionally based on the determination of the 240+239PU activity via Alpha Spectrometry (AS). A large number of alpha spectrometry sources (planchettes) containing radiochemically separated Pu are therefore stored worldwide and are available for further analyses. These archive samples represent a resource from which valuable information on isotopic composition of alpha emitters including Pu can be obtained. The relative abundances of Pu isotopes can be used to trace specific Pu sources and characterize the relative contributions of different Pu sources in a sample. Thus, in addition to the total 239+240PU activity, determination of the Pu-240/Pu-239 ratio can provide valuable information on the nature of the Pu emitting sources. The Pu isotopic ratios can be determined by mass spectrometry techniques such as Sector Field Inductively Coupled Plasma Mass Spectrometry (SF-ICPMS) or Accelerator Mass Spectrometry (AMS) that require dissolution and complete destruction of the material deposited on the planchettes. In this study Laser Ablation (LA)-quadrupole-ICP-MS has been employed for the analysis of Pu-239/Pu-240 ratios from alpha-planchettes prepared from samples originating from the Mayak PA nuclear facility, Russia. The results are compared with data from AMS and show that the Pu-240/Pu-239 ratios obtained by LA-ICP-MS can be utilized to distinguish weapons-grade Pu from civil reprocessing sources. Moreover, isotope ratio mapping can also be performed across the planchettes, allowing e.g. the visualization of possible inhomogeneities in the Pu-isotope distribution on their surface. Thus, this solid sample technique can be applied to extract additional information from existing archives of samples. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
000331504100015 |
Publication Date |
2013-12-09 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
2050-7887; 2050-7895 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor ![sorted by Impact Factor field, descending order (down)](img/sort_desc.gif) |
2.592 |
Times cited |
10 |
Open Access |
|
Notes |
; This work was supported by the Research Council of Norway through its Centres of Excellence funding scheme, project number 223268/F50, and the Hercules fund, Brussels (grant A11/0387). ; |
Approved |
Most recent IF: 2.592; 2014 IF: 2.171 |
Call Number |
UA @ admin @ c:irua:115791 |
Serial |
5684 |
Permanent link to this record |
|
|
|
Author |
Kuznetsov, A.S.; Lu, Y.-G.; Turner, S.; Shestakov, M.V.; Tikhomirov, V.K.; Kirilenko, D.; Verbeeck, J.; Baranov, A.N.; Moshchalkov, V.V. |
Title |
Preparation, structural and optical characterization of nanocrystalline ZnO doped with luminescent Ag-nanoclusters |
Type |
A1 Journal article |
Year |
2012 |
Publication |
Optical materials express |
Abbreviated Journal |
Opt Mater Express |
Volume |
2 |
Issue |
6 |
Pages |
723-734 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
Nanocrystalline ZnO doped with Ag-nanoclusters has been synthesized by a salt solid state reaction. Three overlapping broad emission bands due to the Ag nanoclusters have been detected at about 570, 750 and 900 nm. These emission bands are excited by an energy transfer from the exciton state of the ZnO host when pumped in the wavelength range from 250 to 400 nm. The 900 nm emission band shows characteristic orbital splitting into three components pointing out that the anisotropic crystalline wurtzite host of ZnO is responsible for this feature. Heat-treatment and temperature dependence studies confirm the origin of these emission bands. An energy level diagram for the emission process and a model for Ag nanoclusters sites are suggested. The emission of nanocrystalline ZnO doped with Ag nanoclusters may be applied for white light generation, displays driven by UV light, down-convertors for solar cells and luminescent lamps. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
000304953700004 |
Publication Date |
2012-04-30 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
2159-3930; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor ![sorted by Impact Factor field, descending order (down)](img/sort_desc.gif) |
2.591 |
Times cited |
|
Open Access |
|
Notes |
We are grateful to the Methusalem Funding of Flemish Government for the support of this work. Y.-G. L. and S. T. acknowledge funding from the Fund for Scientific Research Flanders (FWO) for a postdoctoral grant and under grant number G056810N. The microscope used in this study was partially financed by the Hercules Foundation. J.V. acknowledges funding from the European Research Council under the 7th Framework Program (FP7), ERC grant No246791 – COUNTATOMS and ERC Starting Grant 278510 VORTEX. The authors acknowledge the guidance of Prof. G. Van Tendeloo, EMAT Antwerpen University, in transmission electron microscopy study in this work. ECASJO_; |
Approved |
Most recent IF: 2.591; 2012 IF: 2.616 |
Call Number |
UA @ lucian @ c:irua:97709UA @ admin @ c:irua:97709 |
Serial |
2707 |
Permanent link to this record |
|
|
|
Author |
Mahieu, S.; Ghekiere, P.; de Winter, G.; de Gryse, R.; Depla, D.; Van Tendeloo, G.; Lebedev, O.I. |
Title |
Biaxially aligned titanium nitride thin films deposited by reactive unbalanced magnetron sputtering |
Type |
A1 Journal article |
Year |
2006 |
Publication |
Surface and coatings technology |
Abbreviated Journal |
Surf Coat Tech |
Volume |
200 |
Issue |
8 |
Pages |
2764-2768 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
|
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Lausanne |
Editor |
|
Language |
|
Wos |
000235202100023 |
Publication Date |
2004-12-15 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0257-8972; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor ![sorted by Impact Factor field, descending order (down)](img/sort_desc.gif) |
2.589 |
Times cited |
36 |
Open Access |
|
Notes |
IWT-Vlaanderen |
Approved |
Most recent IF: 2.589; 2006 IF: 1.559 |
Call Number |
UA @ lucian @ c:irua:56554 |
Serial |
229 |
Permanent link to this record |
|
|
|
Author |
Major, L.; Morgiel, J.; Major, B.; Lackner, J.M.; Waldhauser, W.; Ebner, R.; Nistor, L.; Van Tendeloo, G. |
Title |
Crystallographic aspects related to advanced tribological multilayers of Cr/CrN and Ti/TiN types produced by pulsed laser deposition (PLD) |
Type |
A1 Journal article |
Year |
2006 |
Publication |
Surface and coatings technology |
Abbreviated Journal |
Surf Coat Tech |
Volume |
200 |
Issue |
22/23 |
Pages |
6190-6195 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
|
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Lausanne |
Editor |
|
Language |
|
Wos |
000237842300007 |
Publication Date |
2005-12-10 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0257-8972; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor ![sorted by Impact Factor field, descending order (down)](img/sort_desc.gif) |
2.589 |
Times cited |
32 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 2.589; 2006 IF: 1.559 |
Call Number |
UA @ lucian @ c:irua:59459 |
Serial |
586 |
Permanent link to this record |
|
|
|
Author |
Neyts, E.; Bogaerts, A.; de Meyer, M.; van Gils, S. |
Title |
Macroscale computer simulations to investigate the chemical vapor deposition of thin metal-oxide films |
Type |
A1 Journal article |
Year |
2007 |
Publication |
Surface and coatings technology |
Abbreviated Journal |
Surf Coat Tech |
Volume |
201 |
Issue |
22/23 |
Pages |
8838-8841 |
Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
|
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Lausanne |
Editor |
|
Language |
|
Wos |
000249340400008 |
Publication Date |
2007-05-02 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0257-8972; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor ![sorted by Impact Factor field, descending order (down)](img/sort_desc.gif) |
2.589 |
Times cited |
5 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 2.589; 2007 IF: 1.678 |
Call Number |
UA @ lucian @ c:irua:64790 |
Serial |
1859 |
Permanent link to this record |
|
|
|
Author |
Major, L.; Tirry, W.; Van Tendeloo, G. |
Title |
Microstructure and defect characterization at interfaces in TiN/CrN multilayer coatings |
Type |
A1 Journal article |
Year |
2008 |
Publication |
Surface and coatings technology |
Abbreviated Journal |
Surf Coat Tech |
Volume |
202 |
Issue |
24 |
Pages |
6075-6080 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
Microstructures of TiN/CrN multilayer coatings deposited on austenite steel (Cr Ni 18 8) by pulsed laser deposition (PLD) are characterized using transmission electron microscopy while their mechanical properties were assessed in a ball-on-disk test. All coatings have the same total thickness of about 1 ìm. The individual layers show a highly defective columnar structure, which is characterized by conventional electron microscopy (TEM) as well as by high resolution TEM. These techniques, combined with measurements of the local chemical composition through EDS prove that PLD allows to produce fully separated CrN and TiN layers. The friction, and consequently the wear, are lowered by increasing the total number of layers in the coating. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Lausanne |
Editor |
|
Language |
|
Wos |
000260267100042 |
Publication Date |
2008-07-20 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0257-8972; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor ![sorted by Impact Factor field, descending order (down)](img/sort_desc.gif) |
2.589 |
Times cited |
23 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 2.589; 2008 IF: 1.860 |
Call Number |
UA @ lucian @ c:irua:76614 |
Serial |
2049 |
Permanent link to this record |
|
|
|
Author |
Bogaerts, A.; de Bleecker, K.; Kolev, I.; Madani, M. |
Title |
Modeling of gas discharge plasmas: What can we learn from it? |
Type |
A1 Journal article |
Year |
2005 |
Publication |
Surface and coatings technology |
Abbreviated Journal |
Surf Coat Tech |
Volume |
200 |
Issue |
|
Pages |
62-67 |
Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
|
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Lausanne |
Editor |
|
Language |
|
Wos |
000232327800014 |
Publication Date |
2005-03-22 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0257-8972; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor ![sorted by Impact Factor field, descending order (down)](img/sort_desc.gif) |
2.589 |
Times cited |
11 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 2.589; 2005 IF: 1.646 |
Call Number |
UA @ lucian @ c:irua:53629 |
Serial |
2122 |
Permanent link to this record |
|
|
|
Author |
Huq, M.Z.; Celis, J.P.; Meneve, J.; Stals, L.; Schryvers, D. |
Title |
Oscillating sliding wear of mono- and multilayer ceramic coatings in air |
Type |
A1 Journal article |
Year |
1999 |
Publication |
Surface and coatings technology |
Abbreviated Journal |
Surf Coat Tech |
Volume |
113 |
Issue |
|
Pages |
242-250 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
|
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Lausanne |
Editor |
|
Language |
|
Wos |
000079807600007 |
Publication Date |
2002-07-25 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0257-8972; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor ![sorted by Impact Factor field, descending order (down)](img/sort_desc.gif) |
2.589 |
Times cited |
10 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 2.589; 1999 IF: 1.008 |
Call Number |
UA @ lucian @ c:irua:29379 |
Serial |
2532 |
Permanent link to this record |
|
|
|
Author |
Lamas, J.S.; Leroy, W.P.; Lu, Y.-G.; Verbeeck, J.; Van Tendeloo, G.; Depla, D. |
Title |
Using the macroscopic scale to predict the nano-scale behavior of YSZ thin films |
Type |
A1 Journal article |
Year |
2014 |
Publication |
Surface and coatings technology |
Abbreviated Journal |
Surf Coat Tech |
Volume |
238 |
Issue |
|
Pages |
45-50 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
In this work, Yttria-stabilized zirconia (YSZ) thin films were deposited using dual reactive magnetron sputtering. By varying the deposition conditions, the film morphology and texture of the thin films are tuned and biaxial alignment is obtained. Studying the crystallographic and microstructural properties of the YSZ thin films, a tilted columnar growth was identified. This tilt is shown to be dependent on the compositional gradient of the sample. The variation of composition within a single YSZ column measured via STEM-EDX is demonstrated to be equal to the macroscopic variation on a full YSZ sample when deposited under the same deposition parameters. A simple stress model was developed to predict the tilt of the growing columns. The results indicate that this model not only determines the column bending of the growing film but also confirms that a macroscopic approach is sufficient to determine the compositional gradient in a single column of the YSZ thin films. (C) 2013 Elsevier B.V. All rights reserved. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
Lausanne |
Editor |
|
Language |
|
Wos |
000331028200005 |
Publication Date |
2013-10-29 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0257-8972; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor ![sorted by Impact Factor field, descending order (down)](img/sort_desc.gif) |
2.589 |
Times cited |
8 |
Open Access |
|
Notes |
246791 Countatoms; 278510 Vortex;Nmp3-La-2010-246102 Ifox; 312483 Esteem2; esteem2jra3 ECASJO; |
Approved |
Most recent IF: 2.589; 2014 IF: 1.998 |
Call Number |
UA @ lucian @ c:irua:115765 |
Serial |
3827 |
Permanent link to this record |
|
|
|
Author |
Cremers, V.; Rampelberg, G.; Barhoum, A.; Walters, P.; Claes, N.; Oliveira, T.M. de; Assche, G.V.; Bals, S.; Dendooven, J.; Detavernier, C. |
Title |
Oxidation barrier of Cu and Fe powder by Atomic Layer Deposition |
Type |
A1 Journal article |
Year |
2018 |
Publication |
Surface and coatings technology |
Abbreviated Journal |
Surf Coat Tech |
Volume |
349 |
Issue |
349 |
Pages |
1032-1041 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
Atomic layer deposition (ALD) is a vapor based technique which allows to deposit uniform, conformal films with a thickness control at the atomic scale. In this research, Al 2 O 3 coatings were deposited on micrometer-sized Fe and Cu powder (particles) using the thermal trimethylaluminum (TMA)/ water (H 2 O) process in a rotary pump-type ALD reactor. Rotation of the powder during deposition was required to obtain a pinhole-free ALD coating. The protective nature of the coating was evaluated by quantifying its effectiveness in protecting the metal particles during oxidative annealing treatments. The Al 2 O 3 coated powders were annealed in ambient air while in-situ thermogravimetric analysis (TGA) and in-situ x-ray diffraction (XRD) data were acquired. The thermal stability of a series of Cu and Fe powder with different Al 2 O 3 thicknesses were determined with TGA. In both samples a clear shift in oxidation temperature is visible. For Cu and Fe powder coated with 25 nm Al 2 O 3 , we observed an increase of the oxidation temperature with 300-400°C. For the Cu powder a thin film of only 8 nm is required to obtain an initial increase in oxidation temperature of 200°C. In contrast, for Fe powder a thicker coating of 25 nm is required. In both cases, the oxidation temperature increases with increasing thickness of the Al 2 O 3 coating. These results illustrate that the Al 2 O 3 thin film, deposited by the thermal ALD process (TMA/H 2 O) can be an efficient and pinhole-free barrier layer for micrometer-sized powder particles, provided that the powder is properly agitated during the process to ensure sufficient vapour-solid interaction. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
000441492600108 |
Publication Date |
2018-06-25 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0257-8972 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor ![sorted by Impact Factor field, descending order (down)](img/sort_desc.gif) |
2.589 |
Times cited |
10 |
Open Access |
OpenAccess |
Notes |
The authors acknowledge financial support from the Strategic Initiative Materials in Flanders (SIM, SBO-FUNC project) and the Special Research Fund BOF of Ghent University (GOA 01G01513). J. D. acknowledges the Research Foundation Flanders (FWO-Vlaanderen) for a postdoctoral fellowship. N.C. and S.B. acknowledge financial support from European Research Council (ERC Starting Grant 335078-COLOURATOMS). The authors acknowledge S. Goeteyn for the assistance in preliminary depositions. (ROMEO:green; preprint:; postprint:can ; pdfversion:cannot); ecas_sara |
Approved |
Most recent IF: 2.589 |
Call Number |
EMAT @ emat @c:irua:152174UA @ admin @ c:irua:152174 |
Serial |
4994 |
Permanent link to this record |
|
|
|
Author |
Sharp, J.; Mueller, I.C.; Mandal, P.; Abbas, A.; Nord, M.; Doye, A.; Ehiasarian, A.; Hovsepian, P.; MacLaren, I.; Rainforth, W.M. |
Title |
Characterisation of a high-power impulse magnetron sputtered C/Mo/W wear resistant coating by transmission electron microscopy |
Type |
A1 Journal article |
Year |
2019 |
Publication |
Surface and coatings technology |
Abbreviated Journal |
Surf Coat Tech |
Volume |
377 |
Issue |
377 |
Pages |
124853 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
Thin films of C/Mo/W deposited using combined UBM/HIPIMS sputtering show 2-8 nm clusters of material richer in Mo and W than the matrix (found by EDS microanalysis), with structures that resemble graphitic onions with the metal atoms arranged regularly within them. EELS microanalysis showed the clusters to be rich in W and Mo. As the time averaged power used in the pulsed HIPIMS magnetron was increased, the clusters became more defined, larger, and arranged into layers with amorphous matrix between them. Films deposited with average HIPIMS powers of 4 kW and 6 kW also showed a periodic modulation of the cluster density within the finer layers giving secondary, wider stripes in TEM. By analysing the ratio between the finer and coarser layers, it was found that this meta-layering is related to the substrate rotation in the deposition chamber but in a non-straightforward way. Reasons for this are proposed. The detailed structure of the clusters remains unknown and is the subject of further work. Fluctuation electron microscopy results indicated the presence of crystal planes with the graphite interlayer spacing, crystal planes in hexagonal WC perpendicular to the basal plane, and some plane spacings found in Mo2C. Other peaks in the FEM results suggested symmetry-related starting points for future determination of the structure of the clusters. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
|
Editor |
|
Language |
|
Wos |
000488417800015 |
Publication Date |
2019-08-03 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0257-8972 |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor ![sorted by Impact Factor field, descending order (down)](img/sort_desc.gif) |
2.589 |
Times cited |
1 |
Open Access |
|
Notes |
; J.S. thanks the Mercury Centre at the University of Sheffield for funding, which was part funded by the ERDF under grant MERCURY 904467. I.C.M. acknowledges support from CONACyT and RobertoRocca Education Fellowship. We gratefully acknowledge funding from EPSRC for the pixelated STEM detector and the software used in its operation for the fluctuation microscopy (EP/M009963/ 1, EP/K503903/1 & EP/R511705/1). AD was supported by the EPSRC CDT in Integrative Sensing and Measurement, Grant Number EP/L016753/1. Funding sources did not influence the planning or execution of this work except to enable it. ; |
Approved |
Most recent IF: 2.589 |
Call Number |
UA @ admin @ c:irua:163700 |
Serial |
5383 |
Permanent link to this record |
|
|
|
Author |
Bogaerts, A.; Bultinck, E.; Kolev, I.; Schwaederlé, L.; van Aeken, K.; Buyle, G.; Depla, D. |
Title |
Computer modelling of magnetron discharges |
Type |
A1 Journal article |
Year |
2009 |
Publication |
Journal of physics: D: applied physics |
Abbreviated Journal |
J Phys D Appl Phys |
Volume |
42 |
Issue |
19 |
Pages |
194018,1-194018,12 |
Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
In this paper, some modelling approaches to describe direct current (dc) magnetron discharges developed in our research groups will be presented, including an analytical model, Monte Carlo simulations for the electrons and for the sputtered atoms, a hybrid Monte Carlo-fluid model and particle-in-cell-Monte Carlo collision simulations. The strengths and limitations of the various modelling approaches will be explained, and some characteristic simulation results will be illustrated. Furthermore, some other simulation methods related to the magnetron device will be briefly explained, more specifically for calculating the magnetic field distribution inside the discharge, and for describing the (reactive) sputtering. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
London |
Editor |
|
Language |
|
Wos |
000269993100020 |
Publication Date |
2009-09-19 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0022-3727;1361-6463; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor ![sorted by Impact Factor field, descending order (down)](img/sort_desc.gif) |
2.588 |
Times cited |
32 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 2.588; 2009 IF: 2.083 |
Call Number |
UA @ lucian @ c:irua:78168 |
Serial |
462 |
Permanent link to this record |
|
|
|
Author |
Bogaerts, A.; Eckert, M.; Mao, M.; Neyts, E. |
Title |
Computer modelling of the plasma chemistry and plasma-based growth mechanisms for nanostructured materials |
Type |
A1 Journal article |
Year |
2011 |
Publication |
Journal of physics: D: applied physics |
Abbreviated Journal |
J Phys D Appl Phys |
Volume |
44 |
Issue |
17 |
Pages |
174030-174030,16 |
Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
In this review paper, an overview is given of different modelling efforts for plasmas used for the formation and growth of nanostructured materials. This includes both the plasma chemistry, providing information on the precursors for nanostructure formation, as well as the growth processes itself. We limit ourselves to carbon (and silicon) nanostructures. Examples of the plasma modelling comprise nanoparticle formation in silane and hydrocarbon plasmas, as well as the plasma chemistry giving rise to carbon nanostructure formation, such as (ultra)nanocrystalline diamond ((U)NCD) and carbon nanotubes (CNTs). The second part of the paper deals with the simulation of the (plasma-based) growth mechanisms of the same carbon nanostructures, i.e. (U)NCD and CNTs, both by mechanistic modelling and detailed atomistic simulations. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
London |
Editor |
|
Language |
|
Wos |
000289512700030 |
Publication Date |
2011-04-15 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0022-3727;1361-6463; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor ![sorted by Impact Factor field, descending order (down)](img/sort_desc.gif) |
2.588 |
Times cited |
25 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 2.588; 2011 IF: 2.544 |
Call Number |
UA @ lucian @ c:irua:88364 |
Serial |
463 |
Permanent link to this record |
|
|
|
Author |
Neyts, E.C.; Yusupov, M.; Verlackt, C.C.; Bogaerts, A. |
Title |
Computer simulations of plasmabiomolecule and plasmatissue interactions for a better insight in plasma medicine |
Type |
A1 Journal article |
Year |
2014 |
Publication |
Journal of physics: D: applied physics |
Abbreviated Journal |
J Phys D Appl Phys |
Volume |
47 |
Issue |
29 |
Pages |
293001 |
Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
Plasma medicine is a rapidly evolving multidisciplinary field at the intersection of chemistry, biochemistry, physics, biology, medicine and bioengineering. It holds great potential in medical, health care, dentistry, surgical, food treatment and other applications. This multidisciplinary nature and variety of possible applications come along with an inherent and intrinsic complexity. Advancing plasma medicine to the stage that it becomes an everyday tool in its respective fields requires a fundamental understanding of the basic processes, which is lacking so far. However, some major advances have already been made through detailed experiments over the last 15 years. Complementary, computer simulations may provide insight that is difficultif not impossibleto obtain through experiments. In this review, we aim to provide an overview of the various simulations that have been carried out in the context of plasma medicine so far, or that are relevant for plasma medicine. We focus our attention mostly on atomistic simulations dealing with plasmabiomolecule interactions. We also provide a perspective and tentative list of opportunities for future modelling studies that are likely to further advance the field. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
London |
Editor |
|
Language |
|
Wos |
000338860300001 |
Publication Date |
2014-06-26 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0022-3727;1361-6463; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor ![sorted by Impact Factor field, descending order (down)](img/sort_desc.gif) |
2.588 |
Times cited |
28 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 2.588; 2014 IF: 2.721 |
Call Number |
UA @ lucian @ c:irua:117853 |
Serial |
472 |
Permanent link to this record |
|
|
|
Author |
Tinck, S.; Tillocher, T.; Dussart, R.; Bogaerts, A. |
Title |
Cryogenic etching of silicon with SF6 inductively coupled plasmas: a combined modelling and experimental study |
Type |
A1 Journal article |
Year |
2015 |
Publication |
Journal of physics: D: applied physics |
Abbreviated Journal |
J Phys D Appl Phys |
Volume |
48 |
Issue |
48 |
Pages |
155204 |
Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
A hybrid Monte Carlofluid model is applied to simulate the wafer-temperature-dependent etching of silicon with SF6 inductively coupled plasmas (ICP). The bulk plasma within the ICP reactor volume as well as the surface reactions occurring at the wafer are self-consistently described. The calculated etch rates are validated by experiments. The calculations and experiments are performed at two different wafer temperatures, i.e. 300 and 173 K, resembling conventional etching and cryoetching, respectively. In the case of cryoetching, a physisorbed SFx layer (x = 06) is formed on the wafer, which is negligible at room temperature, because of fast thermal desorption, However, even in the case of cryoetching, this layer can easily be disintegrated by low-energy ions, so it does not affect the etch rates. In the investigated pressure range of 19 Pa, the etch rate is always slightly higher at cryogenic conditions, both in the experiments and in the model, and this could be explained in the model due to a local cooling of the gas above the wafer, making the gas denser and increasing the flux of reactive neutrals, like F and F2, towards the wafer. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
London |
Editor |
|
Language |
|
Wos |
000351856600009 |
Publication Date |
2015-03-25 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0022-3727;1361-6463; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor ![sorted by Impact Factor field, descending order (down)](img/sort_desc.gif) |
2.588 |
Times cited |
9 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 2.588; 2015 IF: 2.721 |
Call Number |
c:irua:124209 |
Serial |
551 |
Permanent link to this record |
|
|
|
Author |
Neyts, E.; Bogaerts, A.; van de Sanden, M.C.M. |
Title |
Densification of thin a-C: H films grown from low-kinetic energy hydrocarbon radicals under the influence of H and C particle fluxes: a molecular dynamics study |
Type |
A1 Journal article |
Year |
2006 |
Publication |
Journal of physics: D: applied physics |
Abbreviated Journal |
J Phys D Appl Phys |
Volume |
39 |
Issue |
9 |
Pages |
1948-1953 |
Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
|
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
London |
Editor |
|
Language |
|
Wos |
000238233900035 |
Publication Date |
2006-04-21 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0022-3727;1361-6463; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor ![sorted by Impact Factor field, descending order (down)](img/sort_desc.gif) |
2.588 |
Times cited |
3 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 2.588; 2006 IF: 2.077 |
Call Number |
UA @ lucian @ c:irua:57254 |
Serial |
634 |
Permanent link to this record |
|
|
|
Author |
Felten, A.; Ghijsen, J.; Pireaux, J.-J.; Johnson, R.L.; Whelan, C.M.; Liang, D.; Van Tendeloo, G. |
Title |
Effect of oxygen rf-plasma on electronic properties of CNTs |
Type |
A1 Journal article |
Year |
2007 |
Publication |
Journal of physics: D: applied physics |
Abbreviated Journal |
J Phys D Appl Phys |
Volume |
40 |
Issue |
23 |
Pages |
7379-7382 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
|
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
London |
Editor |
|
Language |
|
Wos |
000251797900029 |
Publication Date |
2007-11-17 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0022-3727;1361-6463; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor ![sorted by Impact Factor field, descending order (down)](img/sort_desc.gif) |
2.588 |
Times cited |
25 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 2.588; 2007 IF: 2.200 |
Call Number |
UA @ lucian @ c:irua:67284 |
Serial |
828 |
Permanent link to this record |
|
|
|
Author |
Bultinck, E.; Bogaerts, A. |
Title |
The effect of the magnetic field strength on the sheath region of a dc magnetron discharge |
Type |
A1 Journal article |
Year |
2008 |
Publication |
Journal of physics: D: applied physics |
Abbreviated Journal |
J Phys D Appl Phys |
Volume |
41 |
Issue |
|
Pages |
202007,1-5 |
Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
A 2d3v particle-in-cell/Monte Carlo collisions model was applied to study the influence of the magnetic field strength on the cathode sheath region of a direct current (dc) magnetron discharge. When applying a magnetic field of 520-730 G, the cathode sheath width decreases with magnetic field strength, whereas, if a stronger magnetic field is applied (i. e. from 730 to 2600 G), the sheath width increases. This is explained by studying the structure of the sheath in different magnetic field strengths in terms of the electron and ion densities. The consequences of sheath structure on the sputter deposition process are also investigated. It is found that the magnetic field strength can control the erosion profile and the sputter rate. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
London |
Editor |
|
Language |
|
Wos |
000260131700007 |
Publication Date |
2008-10-02 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0022-3727;1361-6463; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor ![sorted by Impact Factor field, descending order (down)](img/sort_desc.gif) |
2.588 |
Times cited |
16 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 2.588; 2008 IF: 2.104 |
Call Number |
UA @ lucian @ c:irua:70630 |
Serial |
847 |
Permanent link to this record |
|
|
|
Author |
Petrović, D.; Martens, T.; van Dijk, J.; Brok, W.J.M.; Bogaerts, A. |
Title |
Fluid modelling of an atmospheric pressure dielectric barrier discharge in cylindrical geometry |
Type |
A1 Journal article |
Year |
2009 |
Publication |
Journal of physics: D: applied physics |
Abbreviated Journal |
J Phys D Appl Phys |
Volume |
42 |
Issue |
20 |
Pages |
205206,1-205206,12 |
Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
A numerical parameter study has been performed for a cylindrical atmospheric pressure dielectric barrier discharge (DBD) in helium with nitrogen impurities using a two-dimensional time-dependent fluid model. The calculated electric currents and gap voltages as a function of time for a given applied potential are presented, as well as the number densities of the various plasma species. This study shows that for the geometry under consideration the applied voltage parameters have a large impact on the electric current profiles and that the discharge current is always determined by the electron and ion conduction currents while the displacement current is nearly negligible. A relative broadening of the current profiles (compared with the duration of the half cycle of the applied voltage) with an increase in the applied frequency is obtained. Nearly sinusoidal current wave forms, usually typical for radio frequency DBDs, are observed while still operating at the frequencies of tens of kilohertz. For the setup under investigation, the Townsend mode of the DBD is observed in the entire range of applied voltage amplitudes and frequencies. It is shown that the average power density dissipated in the discharge increases with rising applied voltage and frequency. An increase in applied voltage frequency leads to an increase in the electron density and a decrease in electron energy, while increasing the voltage amplitude has the opposite effect. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
London |
Editor |
|
Language |
|
Wos |
000270563200028 |
Publication Date |
2009-09-24 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0022-3727;1361-6463; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor ![sorted by Impact Factor field, descending order (down)](img/sort_desc.gif) |
2.588 |
Times cited |
29 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 2.588; 2009 IF: 2.083 |
Call Number |
UA @ lucian @ c:irua:78202 |
Serial |
1228 |
Permanent link to this record |
|
|
|
Author |
Zhang, Y.-R.; Xu, X.; Bogaerts, A.; Wang, Y.-N. |
Title |
Fluid simulation of the phase-shift effect in hydrogen capacitively coupled plasmas: 1 : transient behaviour of electrodynamics and power deposition |
Type |
A1 Journal article |
Year |
2012 |
Publication |
Journal of physics: D: applied physics |
Abbreviated Journal |
J Phys D Appl Phys |
Volume |
45 |
Issue |
1 |
Pages |
015202-015202,11 |
Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
A two-dimensional self-consistent fluid model coupled with the full set of Maxwell equations is established to investigate the phase-shift effect on the transient behaviour of electrodynamics and power deposition in a hydrogen capacitively coupled plasma. The effect has been examined at 13.56 MHz and 100 MHz, respectively, because of the different phase-shift modulation when the electromagnetic effects are dominant. The results indicate that the spatiotemporal distributions of the plasma characteristics obtained for various phase-shift cases are obviously different both in shape and especially in absolute values. Indeed, when the phase difference varies from 0 to π, there is an increase in the electron flux, thus the power deposition becomes more pronounced. At the frequency of 13.56 MHz, the axial electron flux in the bulk plasma becomes uniform along the z-axis, and the radial electron flux exhibits two peaks within one period at the reverse-phase case, whereas the oscillation is less pronounced at the in-phase case. Furthermore, in the very high frequency discharge, the radial electron flux is alternately positive and negative with four peaks during one period, and the ionization mainly occurs in the sheath region, due to the prominent power deposition there at a phase difference equal to π. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
London |
Editor |
|
Language |
|
Wos |
000298290000011 |
Publication Date |
2011-12-12 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0022-3727;1361-6463; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor ![sorted by Impact Factor field, descending order (down)](img/sort_desc.gif) |
2.588 |
Times cited |
57 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 2.588; 2012 IF: 2.528 |
Call Number |
UA @ lucian @ c:irua:92851 |
Serial |
1230 |
Permanent link to this record |
|
|
|
Author |
Zhang, Y.-R.; Xu, X.; Bogaerts, A.; Wang, Y.-N. |
Title |
Fluid simulation of the phase-shift effect in hydrogen capacitively coupled plasmas: 2 : radial uniformity of the plasma characteristics |
Type |
A1 Journal article |
Year |
2012 |
Publication |
Journal of physics: D: applied physics |
Abbreviated Journal |
J Phys D Appl Phys |
Volume |
45 |
Issue |
1 |
Pages |
015203-015203,13 |
Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
A two-dimensional fluid model, including the full set of Maxwell equations, has been developed and applied to investigate the effect of a phase shift between two power sources on the radial uniformity of several plasma characteristics in a hydrogen capacitively coupled plasma. This study was carried out at various frequencies in the range 13.56200 MHz. When the frequency is low, at 13.56 MHz, the plasma density is characterized by an off-axis peak when both power sources are in-phase (phgr = 0), and the best radial uniformity is obtained at phgr = π. This trend can be explained because the radial nonuniformity caused by the electrostatic edge effect can be effectively suppressed by the phase-shift effect at a phase difference equal to π. When the frequency rises to 60 MHz, the plasma density profiles shift smoothly from edge-peaked over uniform to centre-peaked as the phase difference increases, due to the pronounced standing-wave effect, and the best radial uniformity is reached at phgr = 0.3π. At a frequency of 100 MHz, a similar behaviour is observed, except that the maximum of the plasma density moves again towards the radial edge at the reverse-phase case (phgr = π), because of the dominant skin effect. When the frequency is 200 MHz, the bulk plasma density increases significantly with increasing phase-shift values, and a better uniformity is obtained at phgr = 0.4π. This is because the density in the centre increases faster than at the radial edge as the phase difference rises, due to the increasing power deposition Pz in the centre and the decreasing power density Pr at the radial edge. As the phase difference increases to π, the maximum near the radial edge becomes obvious again. This is because the skin effect has a predominant influence on the plasma density under this condition, resulting in a high density at the radial edge. Moreover, the axial ion flux increases monotonically with phase difference, and exhibits similar profiles to the plasma density. The calculation results illustrate that the radial uniformity of the various plasma characteristics is strongly dependent on the applied frequency and the phase shift between both power sources, which is important to realize, for controlling the uniformity of the plasma etch and deposition processes. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
London |
Editor |
|
Language |
|
Wos |
000298290000012 |
Publication Date |
2011-12-12 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0022-3727;1361-6463; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor ![sorted by Impact Factor field, descending order (down)](img/sort_desc.gif) |
2.588 |
Times cited |
15 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 2.588; 2012 IF: 2.528 |
Call Number |
UA @ lucian @ c:irua:92852 |
Serial |
1231 |
Permanent link to this record |
|
|
|
Author |
Zhang, Y.-R.; Bogaerts, A.; Wang, Y.-N. |
Title |
Fluid simulation of the phase-shift effect in Ar/CF4 capacitively coupled plasmas |
Type |
A1 Journal article |
Year |
2012 |
Publication |
Journal of physics: D: applied physics |
Abbreviated Journal |
J Phys D Appl Phys |
Volume |
45 |
Issue |
48 |
Pages |
485204 |
Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
A two-dimensional self-consistent fluid model combined with the full set of Maxwell equations is employed to investigate an Ar/CF4 capacitively coupled plasma, focusing on the phase-shift effect on the plasma characteristics at various frequencies and gas mixture ratios. When the discharge is sustained by a single frequency at 13.56 MHz in an Ar/CF4 mixture with a ratio of 0.9/0.1, no obvious difference is detected between the electron densities obtained in the so-called electrostatic model (with only the static electric fields taken into account) and the electromagnetic model (which includes the electromagnetic effects). However, as the frequency increases to 60 and 100 MHz, the difference becomes distinct, due to the significant influence of the electromagnetic effects. The phase-shift effect on the plasma radial uniformity has also been investigated in a dual frequency discharge, i.e. when the top driven source is switched on with a phase difference phiv ranging from 0 to π, in the frequency range 13.56100 MHz. At low concentration of CF4 (10%), Ar+ ions are the major positive ions in the entire range of frequencies. When the frequency is low, i.e. 13.56 MHz, the Ar+ density exhibits an off-axis peak at phiv = 0 due to the edge effect, and a better uniformity caused by the phase-shift modulation is obtained at phiv = π. At 60 MHz, the Ar+ density varies from edge-peaked at phiv = 0 to uniform (i.e. at phiv = 0.53π), and finally at phiv = π, a broad maximum is observed at the centre due to the standing-wave effect. As the frequency increases to 100 MHz, the best radial uniformity is reached at 0.25π, and the maximum moves again towards the radial wall in the reverse-phase case (phiv = π) due to the dominant skin effect. When the frequency is fixed at 100 MHz, the phase-shift control shows a different behaviour at a high concentration of CF4. For instance, the ${\rm CF}_3 |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
London |
Editor |
|
Language |
|
Wos |
000311148300011 |
Publication Date |
2012-11-06 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0022-3727;1361-6463; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor ![sorted by Impact Factor field, descending order (down)](img/sort_desc.gif) |
2.588 |
Times cited |
8 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 2.588; 2012 IF: 2.528 |
Call Number |
UA @ lucian @ c:irua:101754 |
Serial |
1232 |
Permanent link to this record |
|
|
|
Author |
Ruelle, B.; Felten, A.; Ghijsen, J.; Drube, W.; Johnson, R.L.; Liang, D.; Erni, R.; Van Tendeloo, G.; Dubois, P.; Hecq, M.; Bittencourt, C.; |
Title |
Functionalization of MWCNTs with atomic nitrogen : electronic structure |
Type |
A1 Journal article |
Year |
2008 |
Publication |
Journal of physics: D: applied physics |
Abbreviated Journal |
J Phys D Appl Phys |
Volume |
41 |
Issue |
4 |
Pages |
045202-45204 |
Keywords |
A1 Journal article; Electron microscopy for materials research (EMAT) |
Abstract |
The changes induced by exposing multi-walled carbon nanotubes (CNTs) to atomic nitrogen were analysed by high-resolution transmission electron microscopy (HRTEM), x-ray and ultraviolet photoelectron spectroscopy. It was found that the atomic nitrogen generated by a microwave plasma effectively grafts chemical groups onto the CNT surface altering the density of valence electronic states. HRTEM showed that the exposure to atomic nitrogen does not significantly damage the CNT surface. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
London |
Editor |
|
Language |
|
Wos |
000253177900018 |
Publication Date |
2008-01-29 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0022-3727;1361-6463; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor ![sorted by Impact Factor field, descending order (down)](img/sort_desc.gif) |
2.588 |
Times cited |
16 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 2.588; 2008 IF: 2.104 |
Call Number |
UA @ lucian @ c:irua:102633 |
Serial |
1306 |
Permanent link to this record |
|
|
|
Author |
Van der Paal, J.; Aernouts, S.; van Duin, A.C.T.; Neyts, E.C.; Bogaerts, A. |
Title |
Interaction of O and OH radicals with a simple model system for lipids in the skin barrier : a reactive molecular dynamics investigation for plasma medicine |
Type |
A1 Journal article |
Year |
2013 |
Publication |
Journal of physics: D: applied physics |
Abbreviated Journal |
J Phys D Appl Phys |
Volume |
46 |
Issue |
39 |
Pages |
395201 |
Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
Plasma medicine has been claimed to provide a novel route to heal wounds and regenerate skin, although very little is currently known about the elementary processes taking place. We carried out a series of ReaxFF-based reactive molecular dynamics simulations to investigate the interaction of O and OH radicals with lipids, more specifically with α-linolenic acid as a model for the free fatty acids present in the upper skin layer. Our calculations predict that the O and OH radicals most typically abstract a H atom from the fatty acids, which can lead to the formation of a conjugated double bond, but also to the incorporation of alcohol or aldehyde groups, thereby increasing the hydrophilic character of the fatty acids and changing the general lipid composition of the skin. Within the limitations of the investigated model, no formation of possibly toxic products was observed. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
London |
Editor |
|
Language |
|
Wos |
000324810400007 |
Publication Date |
2013-09-11 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0022-3727;1361-6463; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor ![sorted by Impact Factor field, descending order (down)](img/sort_desc.gif) |
2.588 |
Times cited |
36 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 2.588; 2013 IF: 2.521 |
Call Number |
UA @ lucian @ c:irua:109904 |
Serial |
1684 |
Permanent link to this record |
|
|
|
Author |
Mao, M.; Bogaerts, A. |
Title |
Investigating the plasma chemistry for the synthesis of carbon nanotubes/nanofibres in an inductively coupled plasma enhanced CVD system : the effect of different gas mixtures |
Type |
A1 Journal article |
Year |
2010 |
Publication |
Journal of physics: D: applied physics |
Abbreviated Journal |
J Phys D Appl Phys |
Volume |
43 |
Issue |
20 |
Pages |
205201,1-205201,20 |
Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
A hybrid model, called the hybrid plasma equipment model (HPEM), was used to study an inductively coupled plasma in gas mixtures of H2 or NH3 with CH4 or C2H2 used for the synthesis of carbon nanotubes or carbon nanofibres (CNTs/CNFs). The plasma properties are discussed for different gas mixtures at low and moderate pressures, and the growth precursors for CNTs/CNFs are analysed. It is found that C2H2, C2H4 and C2H6 are the predominant molecules in CH4 containing plasmas besides the feedstock gas, and serve as carbon sources for CNT/CNF formation. On the other hand, long-chain hydrocarbons are observed in C2H2-containing plasmas. Furthermore, the background gases CH4 and C2H2 show a different decomposition rate with H2 or NH3 addition at moderate pressures. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
London |
Editor |
|
Language |
|
Wos |
000277373400009 |
Publication Date |
2010-05-05 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0022-3727;1361-6463; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor ![sorted by Impact Factor field, descending order (down)](img/sort_desc.gif) |
2.588 |
Times cited |
52 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 2.588; 2010 IF: 2.109 |
Call Number |
UA @ lucian @ c:irua:82067 |
Serial |
1723 |
Permanent link to this record |
|
|
|
Author |
Mao, M.; Bogaerts, A. |
Title |
Investigating the plasma chemistry for the synthesis of carbon nanotubes/nanofibres in an inductively coupled plasma-enhanced CVD system : the effect of processing parameters |
Type |
A1 Journal article |
Year |
2010 |
Publication |
Journal of physics: D: applied physics |
Abbreviated Journal |
J Phys D Appl Phys |
Volume |
43 |
Issue |
31 |
Pages |
315203-315203,15 |
Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
A parameter study is carried out for an inductively coupled plasma used for the synthesis of carbon nanotubes or carbon nanofibres (CNTs/CNFs), by means of the Hybrid Plasma Equipment Model. The influence of processing parameters including gas ratio for four different gas mixtures typically used for CNT/CNF growth (i.e. CH4/H2, CH4/NH3, C2H2/H2 and C2H2/NH3), inductively coupled plasma (ICP) power (501000 W), operating pressure (10 mTorr1 Torr), bias power (01000 W) and temperature of the substrate (01000 °C) on the plasma chemistry is investigated and the optimized conditions for CNT/CNF growth are analysed. Summarized, our calculations suggest that a lower fraction of hydrocarbon gases (CH4 or C2H2, i.e. below 20%) and hence a higher fraction of etchant gases (H2 or NH3) in the gas mixture result in more 'clean' conditions for controlled CNT/CNF growth. The same applies to a higher ICP power, a moderate ICP gas pressure above 100 mTorr (at least for single-walled carbon nanotubes), a high bias power (for aligned CNTs) and an intermediate substrate temperature. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
London |
Editor |
|
Language |
|
Wos |
000280275200007 |
Publication Date |
2010-07-17 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0022-3727;1361-6463; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor ![sorted by Impact Factor field, descending order (down)](img/sort_desc.gif) |
2.588 |
Times cited |
17 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 2.588; 2010 IF: 2.109 |
Call Number |
UA @ lucian @ c:irua:88365 |
Serial |
1724 |
Permanent link to this record |
|
|
|
Author |
Tinck, S.; Boullart, W.; Bogaerts, A. |
Title |
Investigation of etching and deposition processes of Cl2/O2/Ar inductively coupled plasmas on silicon by means of plasmasurface simulations and experiments |
Type |
A1 Journal article |
Year |
2009 |
Publication |
Journal of physics: D: applied physics |
Abbreviated Journal |
J Phys D Appl Phys |
Volume |
42 |
Issue |
|
Pages |
095204,1-095204,13 |
Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
In this paper, a simulation method is described to predict the etching behaviour of Cl2/O2/Ar inductively coupled plasmas on a Si substrate, as used in shallow trench isolation for the production of electronic devices. The hybrid plasma equipment model (HPEM) developed by Kushner et al is applied to calculate the plasma characteristics in the reactor chamber and two additional Monte Carlo simulations are performed to predict the fluxes, angles and energy of the plasma species bombarding the Si substrate, as well as the resulting surface processes such as etching and deposition. The simulations are performed for a wide variety of operating conditions such as gas composition, chamber pressure, power deposition and substrate bias. It is predicted by the simulations that when the fraction of oxygen in the gas mixture is too high, the oxidation of the Si substrate is superior to the etching of Si by chlorine species, resulting in an etch rate close to zero as is also observed in the experiments. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
London |
Editor |
|
Language |
|
Wos |
000265531000030 |
Publication Date |
2009-04-16 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0022-3727;1361-6463; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor ![sorted by Impact Factor field, descending order (down)](img/sort_desc.gif) |
2.588 |
Times cited |
23 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 2.588; 2009 IF: 2.083 |
Call Number |
UA @ lucian @ c:irua:75601 |
Serial |
1731 |
Permanent link to this record |
|
|
|
Author |
Van Gaens, W.; Bogaerts, A. |
Title |
Kinetic modelling for an atmospheric pressure argon plasma jet in humid air |
Type |
A1 Journal article |
Year |
2013 |
Publication |
Journal of physics: D: applied physics |
Abbreviated Journal |
J Phys D Appl Phys |
Volume |
46 |
Issue |
27 |
Pages |
275201-275253 |
Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
A zero-dimensional, semi-empirical model is used to describe the plasma chemistry in an argon plasma jet flowing into humid air, mimicking the experimental conditions of a setup from the Eindhoven University of Technology. The model provides species density profiles as a function of the position in the plasma jet device and effluent. A reaction chemistry set for an argon/humid air mixture is developed, which considers 84 different species and 1880 reactions. Additionally, we present a reduced chemistry set, useful for higher level computational models. Calculated species density profiles along the plasma jet are shown and the chemical pathways are explained in detail. It is demonstrated that chemically reactive H, N, O and OH radicals are formed in large quantities after the nozzle exit and H2, O2(1Δg), O3, H2O2, NO2, N2O, HNO2 and HNO3 are predominantly formed as 'long living' species. The simulations show that water clustering of positive ions is very important under these conditions. The influence of vibrational excitation on the calculated electron temperature is studied. Finally, the effect of varying gas temperature, flow speed, power density and air humidity on the chemistry is investigated. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
London |
Editor |
|
Language |
|
Wos |
000320854700009 |
Publication Date |
2013-06-18 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0022-3727;1361-6463; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor ![sorted by Impact Factor field, descending order (down)](img/sort_desc.gif) |
2.588 |
Times cited |
115 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 2.588; 2013 IF: 2.521 |
Call Number |
UA @ lucian @ c:irua:108725 |
Serial |
1758 |
Permanent link to this record |
|
|
|
Author |
Zhang, Y.; Jiang, W.; Bogaerts, A. |
Title |
Kinetic simulation of direct-current driven microdischarges in argon at atmospheric pressure |
Type |
A1 Journal article |
Year |
2014 |
Publication |
Journal of physics: D: applied physics |
Abbreviated Journal |
J Phys D Appl Phys |
Volume |
47 |
Issue |
43 |
Pages |
435201 |
Keywords |
A1 Journal article; Plasma Lab for Applications in Sustainability and Medicine – Antwerp (PLASMANT) |
Abstract |
A one-dimensional, implicit particle-in-cell Monte Carlo collision model is used to simulate the plasma kinetic properties at a steady state in a parallel-plate direct current argon glow microdischarge under various operating conditions, such as driving voltage (301000 V) and gap size (101000 µm) at atmospheric pressure. First, a comparison between rf and dc modes is shown for the same pressure, driving voltage and gap spacing. Furthermore, the effect of gap size scaling (in the range of 101000 µm) on the breakdown voltage, peak electron density and peak electron current density at the breakdown voltage is examined. The breakdown voltage is lower than 150 V in all gaps considered. The microdischarge is found to have a neutral bulk plasma region and a cathode sheath region with size varying with the applied voltage and the discharge gap. In our calculations, the electron and ion densities are of the order of 10181023 m−3, which is in the glow discharge limit, as the ionization degree is lower than 1% . The electron energy distribution function shows a two-energy group distribution at a gap of 10 µm and a three-energy group distribution at larger gaps such as 200 µm and 1000 µm, emphasizing the importance of the gap spacing in dc microdischarges. |
Address |
|
Corporate Author |
|
Thesis |
|
Publisher |
|
Place of Publication |
London |
Editor |
|
Language |
|
Wos |
000343150500011 |
Publication Date |
2014-10-03 |
Series Editor |
|
Series Title |
|
Abbreviated Series Title |
|
Series Volume |
|
Series Issue |
|
Edition |
|
ISSN |
0022-3727;1361-6463; |
ISBN |
|
Additional Links |
UA library record; WoS full record; WoS citing articles |
Impact Factor ![sorted by Impact Factor field, descending order (down)](img/sort_desc.gif) |
2.588 |
Times cited |
10 |
Open Access |
|
Notes |
|
Approved |
Most recent IF: 2.588; 2014 IF: 2.721 |
Call Number |
UA @ lucian @ c:irua:119152 |
Serial |
1759 |
Permanent link to this record |